Seafloor Deposits Research Articles

Airfall volume of the 15 January 2022 eruption of Hunga volcano estimated from ocean color changes

On 15 January 2022, Hunga volcano erupted, creating an extensive and high-reaching umbrella cloud over the open ocean, hindering traditional isopach mapping and fallout volume estimation. In MODIS satellite imagery, ocean surface water was discolored around Hunga following the eruption, which we attribute to ash fallout from the umbrella cloud. By relating intensity of ocean discoloration to fall deposit thicknesses in the Kingdom of Tonga, we develop a methodology for estimating airfall volume over the open ocean. Ash thickness measurements from 41 locations are used to fit a linear relationship between ash thickness and ocean reflectance. This produces a minimum airfall volume estimate of 1.8-0.4+0.3\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${1.8}_{-0.4}^{+0.3}$$\\end{document} km3. The whole eruption produced > 6.3 km3 of uncompacted pyroclastic material on the seafloor and a caldera volume change of 6 km3 DRE. Our fall estimates are consistent with the interpretation that most of the seafloor deposits were emplaced by gravity currents rather than fall deposits. Our proposed method does not account for the largest grain sizes, so is thus a minimum estimate. However, this new ocean-discoloration method provides an airfall volume estimate consistent with other independent measures of the plume and is thus effective for rapidly estimating fallout volumes in future volcanic eruptions over oceans.

An Integrative Taxonomic Survey of Benthic Foraminiferal Species (Protista, Rhizaria) from the Eastern Clarion-Clipperton Zone

The abyssal Pacific Clarion Clipperton Zone (CCZ) hosts vast, commercially valuable seafloor deposits of polymetallic nodules. Foraminifera (testate protists) dominate benthic communities in this region. Here, we present a taxonomic survey, combining morphological and genetic data and focussing on mainly meiofauna-sized Foraminifera from the eastern CCZ. Sequences obtained from >100 specimens, the majority photographically documented, were analysed phylogenetically. Most were single-chambered Monothalamea (‘monothalamids’), a high percentage of them squatters inhabiting empty tests of mainly multi-chambered Foraminifera. The first sequences for the monothalamid genus Storthosphaera were obtained, while specimens assigned to Gloiogullmia, Hippocrepinella and Vanhoeffenella yielded new sequences. Among multichambered taxa, high-throughput Illumina sequencing (HTS) revealed a second haplotype of the calcareous rotaliid Oridorsalis umbonatus, possibly representing a distinct species. Additional HTS sequences were obtained from the rotaliids Nuttallides umbonifer and Globocassidulina subglobosa, confirming their wide distributions. We also obtained the first sequences for Cribrostomoides subglobosa, showing that it branches separately from other members of this genus. The fact that many sequences did not correspond to known morphospecies reflects the scarcity of reference barcodes for deep-sea Foraminifera, particularly the poorly known but highly diverse monothalamids. We recommend using HTS of single specimens to reveal further unknown species. Despite extensive research, much remains to be learnt about the true scale of foraminiferal biodiversity in the CCZ.

A new isochron for stratigraphic correlation in the Permian Delaware Basin and beyond

Altered volcanic ash, preserved as bentonite clay within sedimentary depositional units, can facilitate regional stratigraphic correlation. While many bentonite ash beds have been documented in core extracted over decades of hydrocarbon exploration in the Delaware Basin, a particular ∼1 cm-thick bentonite has been identified at a distinct stratigraphic position, at a sedimentary facies transition from thin-bedded calciclastic turbidites to thick-bedded siliciclastic turbidites, in the compositionally-mixed upper Wolfcamp formation. A comparison of geochemical analyses of the ash from two cores and petrophysical correlations across eight wells was conducted to test the regional correlation of the ash. Despite diagenetic alteration since seafloor deposition ∼280 Ma, nearly identical geochemical trends between incompatible elemental subsets, including light and heavy rare earth elements, large ion lithophiles, and high field strength elements, suggest that these two ash deposits originated from the same volcanic center. Detailed sedimentologic analyses and lithostratigraphic correlations across three cores spaced tens of km apart confirm that the ash bed is bound by correlative quiescent deepwater strata. Based on the chemical composition, probable timing of deposition, and proximity, we speculate that the Las Delicias Arc produced this ash, and it was transported by wind and deposited as a hemipelagite into the Delaware Basin deep marine environment. This discovery implies the existence of the ash marker in other cores within Late Paleozoic western equatorial Pangea, e.g. in compositionally-mixed deep marine deposits of the Midland Basin and outcropping deposits around the Greater Permian Basin and beyond, which would facilitate regional chronostratigraphic correlation for a critical time in Earth's history.

Nearshore subtidal community response during and after sediment disturbance associated with dam removal

Dam removal is used increasingly to restore aquatic ecosystems and remove unnecessary or high-risk infrastructure. As the number of removals increases, there is a growing understanding about the hydrologic, geomorphic, and ecological responses to these removals. Most dam removal studies, however, focus on river and watershed responses to dam removal. The removal of two dams on the Elwha River provided a unique opportunity to characterize the response of nearshore (coastal) ecosystems. We conducted SCUBA surveys between 2011 and 2022 to quantify trajectories of change in a nearshore ecosystem during and after dam removal. We focused on the degree to which the abundances of kelp, benthic invertebrates, and fish changed in response to patterns of sediment fluxes during and after dam removal. Our findings point to two pathways of response depending on the disturbance mechanism and species type. Sites with persistent sediment deposition were characterized by wholesale community changes that did not recover to a before dam removal condition. Instead, the sites were colonized by new species that were largely absent prior to dam removal. Sites that experienced high turbidity but lacked persistent seafloor deposition were primarily characterized by a reduction in the abundance of kelp and other algae during dam removal and a rapid recovery after sediment flux to the nearshore declined. Dam removal influences on invertebrates and fish at these sites were more variable, benefiting some species and disadvantaging others. In addition to dam removal, sea star wasting syndrome and a marine heatwave exerted distinct controls on subtidal communities during the same period. The loss of the predatory sea star Pycnopodia helianthoides was associated with gains in some of its prey species, and kelp community changes reflected regional trends in ocean temperature and kelp abundance. The results presented here have important implications for understanding the response of marine ecosystems to future dam removals and similar sediment perturbation events.

Macrofauna-sized foraminifera in epibenthic sledge samples from five areas in the eastern Clarion-Clipperton Zone (equatorial Pacific)

Benthic foraminifera cannot be sampled adequately using a single device. Smaller taxa are best collected using multicorers, the larger with box corers, but towed devices (dredges, trawls and epibenthic sledges) also retain many larger species. Here, we describe macrofaunal (>300 µm) foraminiferal assemblages obtained using an epibenthic sledge (EBS) in the Clarion-Clipperton Zone (eastern equatorial Pacific), a region hosting seafloor deposits of polymetallic nodules. Twelve EBS samples were collected in four areas licenced for exploration by the International Seabed Authority (ISA) to German, IOM, Belgium and French contractors, and to APEI-3, one of the protected Areas of Special Scientific Interest designated by the ISA. We recognised 280 morphospecies among 1954 specimens, with between 74 (IOM) and 121 (Belgium) in particular areas. Most (92.7%) were single-chambered monothalamids, of which 75 species (26.8%) belonged to the Komokioidea (‘komoki’), 47 (16.8%) to branched and unbranched tubes, 33 (11.8%) to chain-like and 32 (11.4%) to various ‘komoki-like’ forms. Fragments of megafaunal xenophyophores represented 21 species (7.50%), including Spiculammina delicata, previously reported only from the Russian area. Rarefaction curves and sample coverage completeness curves suggest that only a fraction of the macrofaunal foraminiferal diversity had been sampled. The occurrence of 71.8% of species in 1-2 of the 12 samples and 84.9% in 1-3 of the samples was a likely result of substantial undersampling. Dissimilarity in species composition between areas was very high: 64.2% (German vs IOM area) to 86.9% (German area vs APEI-3). Similarity within a single area was quite low: 29.1% (German) to 45.1% (IOM). In multidimensional scaling (MDS) plots, the APEI-3 area was clearly distinct in terms of faunal composition from all other areas, the French area somewhat separated from the German, IOM and Belgium areas, with the German and IOM samples being the most similar. These patterns may reflect the geographical separation of the French and APEI-3 areas and their location in deeper, more oligotrophic waters. Our study demonstrates that EBS samples from the eastern CCZ are a rich source of novel foraminiferal taxa, particularly light, easily resuspended komoki, providing a valuable perspective on foraminiferal biodiversity.

Automated Detection of Hydrothermal Emission Signatures From Multibeam Echo Sounder Images Using Deep Learning

Seafloor massive sulfide deposits have attracted attention as a mineral resource, as they contain a wide variety of base, precious, and other valuable critical metals. Previous studies have shown that signatures of hydrothermal activity can be detected by a multi-beam echo sounder (MBES), which would be beneficial for exploring sulfide deposits. Although detecting such signatures from acoustic images is currently performed by skilled humans, automating this process could lead to improved efficiency and cost effectiveness of exploration for the seafloor deposits. Herein, we attempted to establish a method for automated detection of MBES water column anomalies using deep learning models. First, we compared the “Mask R-CNN” and “YOLO-v5” detection model architectures, wherein YOLO-v5 yielded higher F1 scores. We then compared the number of training classes and found that models trained with two classes (signal and noise) exhibited superior performance compared with models trained with only one class (signal). Finally, we examined the number of trainable parameters and obtained the best model performance when the YOLO-v5l model with a large trainable parameters was used in the two-class training process. The best model had a precision of 0.928, a recall of 0.881, and an F1 score of 0.904. Moreover, this model achieved a low false alarm rate (less than 0.7%) and had a high detection speed (20−25 ms per frame), indicating that it can be applied in the field for automatic and real-time exploration of seafloor hydrothermal deposits.

Detection of Landslides and Tsunamis in Douglas Channel and Gardner Canal, British Columbia

In 1975, an underwater landslide in Kitimat Arm at the northern end of Douglas Channel, British Columbia (Figure 1a), triggered tsunami waves that were observed to reach a height of over 8 m at the head of the inlet, destroying a dock and a newly built barge terminal (Bornhold, 1983). Elsewhere in the Douglas Channel region, seafloor deposits attest to previous submarine landslide events (Conway et al., 2012; Stacey et al., 2019), and subaerial landslides of various sizes regularly occur (Maynard et al., 2017). Landslide-generated tsunamis are increasingly recognized as a substantial hazard worldwide, with the potential for extreme wave runup and localized damage, particularly in narrow, steep-sided bays and inlets. In most cases it is not possible to prevent landslides from occurring; however, mitigation efforts can include early landslide detection and the development of tsunami early warning systems using real-time data.

New Data for the Internal Structure of Ultramafic Hosted Seafloor Massive Sulfides (SMS) Deposits: Case Study of the Semenov-5 Hydrothermal Field (13°31′ N, MAR)

The internal structure of Seafloor Massive Sulfides (SMS) deposits is one of the most important and complex issues facing the study of modern hydrothermal ore systems. The Semenov-5 hydrothermal field is a unique area where mass wasting on the slope of the oceanic core complex (OCC) structure exposes the subsurface portion of the deposit and offers an exceptional opportunity to observe massive sulfides that have formed not only on the seafloor but in sub-seafloor zones as well. This paper examines the internal structure of the OCC-related Semenov-5 hydrothermal field along with analysis of the mineralogy and chemistry of different parts of sulfide deposit. The seafloor deposit is comprised of pyrite, marcasite, hematite, goethite, lepidocrocite, rare pyrrhotite, isocubanite and Co-rich pyrite. Sulfide chemistry indicates the prevailing influence of ultramafics on their composition irrespective of the spatial relation with basalt lavas. Sub-seafloor mineralization is associated with ultramafic rocks and is represented by massive and disseminated sulfides. Pyrrhotite, isocubanite, pyrite, chalcopyrite, Co-rich pyrite, quartz with rutile, quarts with hematite and Cr-spinels are fixed in massive subseafloor mineralization. The presence of Cr-spinels as well as a very high Cr content are regarded as indicators of the metasomatic nature of this part of the deposit that had formed as a result of ultramafic replacement. As a result, three zones of a hydrothermal ore-forming system have been described: massive sulfides precipitated from hot vents on the surface of the seafloor, massive sulfides formed due to replacement of ultramafics below the seafloor and disseminated sulfide mineralization-filled cracks in hosted rocks which have formed stockwork around metasomatic massive sulfides. Despite differences in the mineral and geochemical composition of sub-seafloor and seafloor mineralization, all minerals subject to the sample formed as a consequence of fluid circulation in ultramafic rocks and were linked by a common ore-forming process.

Stable isotope (C, O, S, and Zn) geochemistry of marble-hosted exhalative zinc deposits in the Central Metasedimentary Belt, Grenville Province, Canada: Insights into ore deposition and tectonic setting

Mesoproterozoic marbles of the southwestern Grenville Province contain numerous stratiform zinc deposits, which include the world-class Balmat-Edwards Zn-Pb district in the Adirondack Lowlands and the Franklin-Sterling Zn-Fe-Mn district in the New Jersey Highlands. Ten small deposits in the Central Metasedimentary Belt (CMB) of Ontario and Quebec were selected for stable isotope study (C and O in carbonates and S and Zn in sulfides) to help constrain depositional conditions, ore genesis, and tectonic setting. These deposits and the Balmat-Edwards and Franklin-Sterling districts are interpreted to have formed in contemporaneous back-arc basins associated with rifting of the Andean-style margin of Laurentia. Stable isotope systematics and the geology of these deposits indicate two distinct sedimentary exhalative (Sedex) settings: marble-hosted deposits associated with volcanic rocks, and marble-hosted deposits that are not associated with volcanic rocks and sometimes occur with evaporites. Volcanic-associated Sedex deposits (the Long Lake, Slave Lake, Wilkinson, Lafontaine, Bouchette, and Leitch deposits, and the Franklin-Sterling district) have COS isotope systematics that are consistent with water/rock interaction between marine carbonate protoliths and fluids having an igneous component at ca. 150 ± 25 °C. In contrast, Sedex deposits not associated with volcanic rocks (the Cadieux, Spry, Thirty Island Lake, and Salerno Lake deposits, and the Balmat-Edwards district) have C and O isotope ratios that are consistent with formation at ambient or low (<80 °C) temperatures. Sulfur isotopes of sulfides in some evaporite-associated deposits are similar to those of other Proterozoic Sedex deposits (δ34S = 5–15 ‰ VCDT), with the Cadieux and Spry having lower values (δ34S ≈ 0‰) which might reflect differences in depositional settings. Zinc isotope ratios of CMB Zn deposits are relatively constrained (δ66Zn = 0.17 ± 0.04 ), and are similar to other seafloor deposits. An exception to this is the Thirty Island Lake deposit in the Frontenac terrane, which has δ66Zn = 0.46 ± 0.05 ‰, which may indicate an exotic origin relative to other CMB deposits. The recognition of the volcanic association for some Grenville Sedex deposits and not for others (and the relationship with evaporites for this group) has implications for Zn exploration programs in this region.

Sea Ice Dynamics Drive Benthic Microbial Communities in McMurdo Sound, Antarctica.

Climate change is driving dramatic variability in sea ice dynamics, a key driver in polar marine ecosystems. Projected changes in Antarctica suggest that regional warming will force dramatic shifts in sea ice thickness and persistence, altering sea ice-associated primary production and deposition to the seafloor. To improve our understanding of the impacts of sea ice change on benthic ecosystems, we directly compared the benthic microbial communities underlying first-year sea ice (FYI) and multi-year sea ice (MYI). Using two tractable coastal habitats in McMurdo Sound, Antarctica, where FYI (Cape Evans) and MYI (New Harbour) prevail, we show that the structure and composition of the benthic microbial communities reflect the legacy of sea ice dynamics. At Cape Evans, an enrichment of known heterotrophic algal polysaccharide degrading taxa (e.g., Flavobacteriaceae, unclassified Gammaproteobacteria, and Rubritaleaceae) and sulfate-reducing bacteria (e.g., Desulfocapsaceae) correlated with comparatively higher chlorophyll a (14.2±0.8μgg−1) and total organic carbon content (0.33%±0.04), reflecting increased productivity and seafloor deposition beneath FYI. Conversely, at New Harbour, an enrichment of known archaeal (e.g., Nitrosopumilaceae) and bacterial (e.g., Woeseiaceae and Nitrospiraceae) chemoautotrophs was common in sediments with considerably lower chlorophyll a (1.0±0.24μgg−1) and total organic carbon content (0.17%±0.01), reflecting restricted productivity beneath MYI. We also report evidence of a submarine discharge of sub-permafrost brine from Taylor Valley into New Harbour. By comparing our two study sites, we show that under current climate-warming scenarios, changes to sea ice productivity and seafloor deposition are likely to initiate major shifts in benthic microbial communities, with heterotrophic organic matter degradation processes becoming increasingly important. This study provides the first assessment of how legacy sea ice conditions influence benthic microbial communities in Antarctica, contributing insight into sea ice–benthic coupling and ecosystem functioning in a polar environment.

Functional diversity of microbial communities in inactive seafloor sulfide deposits.

The seafloor sulfide structures of inactive vents are known to host abundant and diverse microorganisms potentially supported by mineralogy of sulfides. However, little is known about the diversity and distribution of microbial functions. Here, we used genome-resolved metagenomics to predict microbial metabolic functions and the contribution of horizontal gene transfer to the functionality of microorganisms inhabiting several hydrothermally inactive seafloor deposits among globally distributed deep-sea vent fields. Despite of geographically distant vent fields, similar microbial community patterns were observed with the dominance of Gammaproteobacteria, Bacteroidota and previously overlooked Candidatus Patescibacteria. Metabolically flexible Gammaproteobacteria are major potential primary producers utilizing mainly sulfur, iron and hydrogen as electron donors coupled with oxygen and nitrate respiration for chemolithoautotrophic growth. In addition to heterotrophic microorganisms like free-living Bacteroidota, Ca. Patescibacteria potentially perform fermentative recycling of organic carbon. Finally, we provided evidence that many functional genes that are central to energy metabolism have been laterally transferred among members within the community and largely within the same class. Taken together, these findings shed light on microbial ecology and evolution in inactive seafloor sulfide deposits after the cessation of hydrothermal activities.

Seasonality in Saharan Dust Across the Atlantic Ocean: From Atmospheric Transport to Seafloor Deposition

AbstractSaharan dust is transported in great quantities from the North African continent every year, most of which is deposited across the North Atlantic Ocean. This dust impacts regional and global climate by affecting the atmospheric radiation balance and altering ocean carbon budgets. However, little research has been carried out on time series of Saharan dust collected in situ across the open Atlantic. Here, we present a unique three‐year time series of Saharan dust along a trans‐Atlantic transect, sampled by moored surface buoys and subsurface sediment traps. Results show a good correlation between the particle‐size distributions of atmospheric dust and the lithogenic particles settling to the deep ocean floor, confirming the aeolian origin of the lithogenic particles intercepted by the subsurface sediment traps, even in the distal western part of the Atlantic Ocean. Dust from both dry and wet deposition as collected by the sediment traps, shows increased deposition fluxes and coarser grain size in summer and/or autumn that coincides with increased precipitation at the sampling sites as derived from satellite data. In contrast, both buoys that sampled dust during transport at sea level show little seasonal variation in both concentration and particle size, as the large amounts of dust transported in summer and early autumn at high altitudes are far above their sampling range. This implies that wet deposition in summer and autumn defines the typical seasonal trends of both the dust deposition flux and its particle‐size distribution observed in the sediment traps.

Seafloor deposition of water-based drill cuttings generates distinctive and lengthy sediment bacterial community changes

The spatial extent and persistence of bacterial change caused by deposition of water-based drill cuttings on the seafloor were explored by a community-wide approach. Ten centimeter sediment cores were sampled along transects extending from ≤15 m to 250 m from three nearby drilling sites in the southern Barents Sea. Eight months, 8 years and 15 years, respectively, had passed since the completion of the drillings. At locations heavily affected by drill cuttings, the two most recent sites showed distinct, corresponding deviances from native Barents Sea bacterial community profiles. Otherwise marginal groups, including Mollicutes and Clostridia, showed significant increases in relative abundance. Beyond 100 m from the boreholes the microbiotas appeared undisturbed, as they did at any distance from the 15-years old borehole. The extent of the biological distortion, as indicated by the present microbial study, agreed with previously published macrofaunal surveys at the same drilling sites.

GIS-based Mineral Prospectivity Mapping of Seafloor Massive Sulfide on Ultraslow-spreading Ridges: A Case Study of Southwest Indian Ridge 48.7°–50.5° E

With the depletion of mineral resources on land, seafloor massive sulfide deposits have the potential to become as important for exploration, development and mining as those on land. However, it is difficult to investigate the ocean environment where seafloor massive sulfide deposits are located. Thus, improving prospecting efficiency by reducing the exploration search space through mineral prospectivity mapping (MPM) is desirable. MPM has been used in the exploration for seafloor deposits on regional scales, e.g., the Mid-Atlantic Ridge and Arctic Ridge. However, studies of MPM on ultraslow-spreading ridges on segment scales to aid exploration for seafloor massive sulfide have not been carried out to date. Here, data of water depth, geology and hydrothermal plume anomalies were analyzed and the weights-of-evidence method was used to study the metallogenic regularity and to predict the potential area for seafloor massive sulfide exploration in 48.7°–50.5° E segments on the ultraslow spreading Southwest Indian Ridge. Based on spatial analysis, 11 predictive maps were selected to establish a mineral potential model. Weight values indicate that the location of seafloor massive sulfide deposits is correlated mainly with mode-E faults and oceanic crust thickness in the study area, which correspond with documented ore-controlling factors on other studied ultraslow-spreading ridges. In addition, the detachment fault and ridge axis, which reflect the deep hydrothermal circulation channel and magmatic activities, also play an important role. Based on the posterior probability values, 3 level A, 2 level B and 2 level C areas were identified as targets for further study. The MPM results were helpful for narrowing the search space and have implications for investigating and evaluating seafloor massive sulfide resources in the study area and on other ultraslow-spreading ridges.

Volcaniclastic Dispersal During Submarine Lava Effusion: The 2012 Eruption of Havre Volcano, Kermadec Arc, New Zealand

Understanding clast dispersal from subaqueous volcanism is hampered by uncertainty in the source and extent of seafloor deposits. Extensive sampling in situ of seafloor deposits from the 2012 submarine eruption of Havre volcano provides an ideal opportunity to assess subaqueous dispersal. The 2012 Havre eruption produced 14 lavas/domes, a pumice raft, and three seafloor clastic deposits. At Havre the source of clastic deposits can be confidently identified, and deposit thickness, grain size, and distribution are also well-constrained. We examine a seafloor deposit termed subunit 3 (S3) generated in the 2012 Havre eruption to investigate dispersal of fine lapilli and ash, and the eruption conditions that generated this deposit. Subunit 3 is the third from bottom of four subunits that make up the Ash with Lapilli unit. Subunit 3 is composed of ash with highly elongate shapes, unique within the 2012 Havre deposits. It thickens and coarsens toward Lava G, also generated in the 2012 eruption, located on the southwest wall of Havre caldera. Lava G is the only lava produced during the 2012 Havre eruption that has a glassy carapace with elongated vesicles and a fibrous texture. We infer the source of unit S3 is Lava G, due to the spatial pattern of deposit thinning and fining away with distance from this lava, and the morphological and microtextural similarity of ash with the Lava G carapace rock. Grain size and transport distance of ash from S3 are used to test a simple 1D model addressing both clast dispersal by a buoyant thermal plume above an explosive eruption, and by penetrative convection during effusive lava emplacement. Comparison of calculated maximum dispersal distances with grain size and transport distance show that a jet forming eruption generating a turbulent plume is required to generate S3. We suggest that S3 was generated by hybrid explosive-effusive activity during the effusion of Lava G. Using model results we calculate maximum clast dispersal distances across a range of grain sizes for both dispersal mechanisms. The calculated maximum clast dispersal distance has wide implications globally for interpretation of ash deposits from subaqueous eruptions.

Sediment and organic carbon transport and deposition driven by internal tides along Monterey Canyon, offshore California

Submarine canyons are globally important conduits for sediment and organic carbon transport into the deep sea. Using a novel dataset from Monterey Canyon, offshore central California, that includes an extensive array of water column sampling devices, we address how fine-grained sediment and organic carbon are transported, mixed, fractionated, and buried along a submarine canyon. Anderson-type sediment traps were deployed 10–300 m above the seafloor on a suite of moorings anchored between 278 and 1849 m water depths along the axial channel of Monterey Canyon during three consecutive 6-month deployments (2015–2017). Tidal currents within the canyon suspended and transported fine-grained sediment and organic carbon that were captured in sediment traps, which record the composition of sediment and organic carbon transport along the canyon. High sediment accumulation rates in traps increased up-canyon and near the seafloor, where fine-scale (<1 cm) layering was increasingly distinctive in CT scans. There was no along-canyon trend in the organic carbon composition (percent modern carbon and isotopic signatures) among trap locations, suggesting effective mixing. Organic carbon content (weight percent total organic carbon) and excess 210Pb activities (dpm/g) increased down-canyon, reflecting reduced flux of sediment and organic carbon into deeper water, more distal traps. Differing organic carbon signatures in traps compared with previous measurements of seabed deposits along Monterey Canyon suggest that organic carbon transported through the canyon with internal tides may not be consistently recorded in seafloor deposits. First-order estimates from comparing organic carbon content of core and trap samples results in low organic carbon specific burial efficiency (ranging from ~26% to ~0.1%) and suggests that the modern upper Monterey Canyon may not be an effective sink for carbon. Organic carbon isotopic signatures from sediment traps in the water column show more marine influence than seafloor sediment cores; this is likely due to the deposition and reworking of seafloor deposits by sediment density flows and preferential consumption of fresh marine organic carbon on the seafloor, which is better preserved in the traps. Sediment and remaining organic carbon in canyon floor and lower flank deposits preferentially reflect episodic sediment density flow events that are unrelated to internal tides. This study provides a quantified example and conceptual model for internal-tide-related sediment and organic carbon transport, mixing, and burial trends along a submarine canyon that are likely to be similar in many canyons worldwide.

A review of the types and ore mechanism of the cobalt deposits

<p indent=0mm>Cobalt is an important strategic metal of major industrial countries. In order to invoke the importance of the cobalt deposits to the strategic industries in China, this paper aims to introduce the different types of the cobalt deposits in the worldwide, to review the ore mechanism of the cobalt deposits and to propose the research directions of the future studies for the cobalt deposits. Global cobalt resources can be grouped into two deposit types: terrestrial and seafloor deposits. The major terrestrial cobalt deposits include sediment-hosted stratiform copper-cobalt, nickel-cobalt laterite, and magmatic sulfide copper-nickel deposits. Other sources include black shales hosted, skarn and replacement, metasedimentary rocks hosted, iron oxide copper-gold deposits, volcanic massive sulfides, polymetallic veins (five-element veins and other vein types), and Mississippi Valley-Type lead-zinc deposits. Seafloor cobalt-related deposits are mainly iron-manganese-cobalt nodules and crusts, which are hardly explored and productive. The detailed information of the major cobalt deposits is also listed, presenting the tonnage and grade of various types of the cobalt deposits in China. The polymetallic veins and black shales hosted types have the highest grade, and both types should be paid more attentions during the mineral exploration. For the geochemical behavior of the cobalt during the magmatic and hydrothermal environment, the partition coefficient of cobalt in the process of mantle melting under different tectonic background and water contents are relatively stable. Also, during the fractional crystallization of ultramafic-mafic magmas in the magmatic sulfide deposits, cobalt has a slight preference for olivine relative to basalt. In hydrothermal ore system, aqueous Cobalt(II) chloride complexes play a crucial role in cobalt transport and deposition, and their solubility has a close relationship with the temperature and salinity of the fluids. The debate on the genesis of various cobalt-rich deposits can be considered as the debate on the evaluation between diagenetic and superimposed processes in the ore formation. Besides some polymetallic veins, black-shale hosted, Mississippi Valley-Type lead-zinc, and iron oxide copper-gold deposits, the process of cobalt enrichment has close relationships with the ultramafic-mafic intrusions or volcanic during the magmatic processes, hydrothermal processes, or weathering. Moreover, the multiple-stage hydrothermal processes are also critical to cobalt enrichment. We suggest that the spatial-temporal distribution of different cobalt deposits in China and how their formations are related to the tectonic evolution of the craton and orogenic belt should be investigated immediately to determine the controlling geological factors in different cobalt deposits. Also, the thermodynamic properties of different cobalt-bearing speciation under different physico-chemical environments should be identified. The relationship between geodynamic processes and formation of cobalt-rich deposits needs to be considered. Finally, great attention should be paid to the study of marine iron-manganese-cobalt nodules and crusts and their proper mining technology.

Linking Direct Measurements of Turbidity Currents to Submarine Canyon-Floor Deposits

Submarine canyons are conduits for episodic and powerful sediment density flows (commonly called turbidity currents) that move globally significant amounts of terrestrial sediment and organic carbon into the deep sea, forming some of the largest sedimentary deposits on Earth. The only record available for most turbidity currents is the deposit they leave behind. Therefore, to understand turbidity current processes, we need to determine the degree to which these flows are represented by their deposits. However, linking flows and deposits is a major long-standing scientific challenge. There are few detailed measurements from submarine turbidity currents in action, and even fewer direct measurements that can be compared to resulting seabed deposits. Recently, an extensive array of moorings along Monterey Canyon, offshore California, took measurements and samples during sediment density flow events, providing the most comprehensive dataset to date of turbidity current flows and their deposits. Here, we use sediment trap samples, velocity measurements, and seafloor cores to document how sand is transported through a submarine canyon, and how the transported sediment is represented in seafloor deposits. Sediment trap samples from events contain primarily fine to medium-grained sand with sharp bases, normal grading, and muddy tops. Sediment captured from the water column during the flow shows normal grading, which is broadly consistent with the initial peak and waning of flow velocities measured at a single height within the flow, and may be enhanced by collapsing flows. Flow events contain coarser sand concentrated toward the seafloor and larger grain sizes on the seafloor or in the dense near-bed layer, possibly representative of stratified flows. Although flow velocity varies, sand grain sizes in sediment traps are similar over distances of 50 km down-canyon, suggesting that grain size is an unfaithful record of down-canyon changes in maximum flow speeds. Sand transported within flow events and sampled in sediment traps is similar to sand sampled from the seafloor shortly after the events, but traps do not contain pebbles and gravel common in seabed deposits. Seabed deposits thus appear to faithfully record the sand component that is transported in the water column during sub-annual turbidity currents.

Lateral Facies Variability Along the Margin of an Outcropping Salt-Withdrawal Minibasin, South Australia

Many aspects of depositional processes adjacent to exposed evaporite diapirs arc not well understood, yet these processes are key to understanding sediments that are part of economically important hydrocarbon systems around the world. In the Adelaide Rift Complex of South Australia, diapirs intersected the seafloor and land surface during the Ediacaran-Cambrian at the same time as sediment was being deposited. Excellent exposures of these diapirs and their associated minibasins allow the character and distribution of these deposits to be studied in detail; this study examines the interaction between a diapir body and minibasin sediments from a sedimentological perspective. Numerous sections were measured along the minibasin margin, allowing the sedimentary facies, lateral sediment variability, and depositional processes to be determined. Deposition took place in a variety of environments, ranging from carbonate shelves to subaerially exposed tidal flats and alluvial fans. Minibasin sedimentation adjacent to the diapir is characterized by an abundance of gravity-flow deposits, including turbidites and debrites. These deposits often contain extraformational conglomerates brought to the surface by the diapir and redeposited into the minibasin depocenter. Within the minibasin fill, sedimentary facies are unevenly distributed, and sedimentary character is most affected by the diapir in areas where depositional thinning, onlap, and growth faulting are most common. Comparison of our observations with other localities where salt bodies intersect the surface show that syndepositional salt-sediment interaction results in a recurring set of features that can be useful in predicting the sedimentary character of these deposits. This study is one of relatively few to examine the sedimentology of an outcropping minibasin in detail and to describe lateral variability of sedimentary facies along an outcropping minibasin margin. The deposits discussed here therefore provide a valuable analogue for subsurface and seafloor deposits elsewhere where salt-sediment interactions cannot be studied in detail.

Development of a High-Resolution Underwater Gravity Measurement System Installed on an Autonomous Underwater Vehicle

Recently, hydrothermal deposits below the seafloor are believed to be useful for human activity. Because the size of each deposit is much smaller than that of an offshore oil field, detailed exploration for the position and the estimated mass is needed. An underwater gravity survey just above seafloor can directly give localized mass distribution below the seafloor. Therefore, we have developed an underwater gravity measurement system onboard an autonomous underwater vehicle (AUV), which is suitable for wide area surveys close to the seafloor with high resolution. An improved gravimeter was mounted on a levelling platform and the system was contained in a spherical pressure vessel with a diameter of 50 cm. The gravimeter system was installed on a large AUV. All the power is supplied from the AUV and an acoustic communication system enables control and monitoring during observation. The first observation was carried out in September 2012 in Sagami Bay, Japan. The AUV was navigated at a constant speed and constant depth on the same profile. As a result, our system has a repeatability of 0.1 mGal. The developed underwater gravimeter has been used for mapping of gravity anomalies in seafloor deposits areas around Japan since 2013.