Scaffold-free Approaches Research Articles

Recent advancements in cartilage tissue engineering innovation and translation.

Articular cartilage was expected to be one of the first successfully engineered tissues, but today, cartilage repair products are few and they exhibit considerable limitations. For example, of the cell-based products that are available globally, only one is marketed for non-knee indications, none are indicated for severe osteoarthritis or rheumatoid arthritis, and only one is approved for marketing in the USA. However, advances in cartilage tissue engineering might now finally lead to the development of new cartilage repair products. To understand the potential in this field, it helps to consider the current landscape of tissue-engineered products for articular cartilage repair and particularly cell-based therapies. Advances relating to cell sources, bioactive stimuli and scaffold or scaffold-free approaches should now contribute to progress in therapeutic development. Engineering for an inflammatory environment is required because of the need for implants to withstand immune challenge within joints affected by osteoarthritis or rheumatoid arthritis. Bringing additional cartilage repair products to the market willrequire an understanding of the translational vector for their commercialization. Advances thus far can facilitate the future translation of engineered cartilage products to benefit the millions of patients who suffer from cartilage injuries and arthritides.

Self-Assembly of Tooth Root Organoid from Postnatal Human Dental Stem Cells.

Challenges remain in simultaneously regenerating the multiple diverse tissues of the tooth root in a spatially organized manner. Previously, our research group has established that scaffold-free tissue engineering approaches enable dental pulp stem/progenitor cells (DPSCs) and periodontal ligament (PDL) stem/progenitor cells (PDLSCs) to self-assemble into dentin-pulp and PDL-cementum organoids, respectively. In this study, we leveraged the innate self-organizing capacity of DPSCs and PDLSCs to now engineer organoids that resemble the full tooth root. Scaffold-free engineered tissues were generated using a heterogeneous mixture of human DPSCs and PDLSCs. Within 2 days of construct formation, PDLSCs and DPSCs became spatially restricted to the periphery and center of the constructs, respectively, emulating their anatomical positions in the tooth root. Histological and microcomputed tomography analyses showed that organoids exhibited a striated mineral pattern with a central unmineralized core, surrounded by a mineralized tissue structure, enclosed within a second peripheral unmineralized tissue, similar to the natural tooth root. Interestingly, DPSCs gave rise to the central unmineralized tissue and the inner portion of the mineralized tissue, and PDLSCs generated the outer portion of the mineralized tissue and the peripheral soft tissue. Quantitative image analysis of immunofluorescent staining revealed increased dentin sialophosphoprotein expression in the region of mineralized tissue associated with DPSCs and increased cementum protein-1 expression in the portion formed by PDLSCs, demonstrating that tooth root organoids comprise two biochemically distinct mineralized tissues characteristic of dentin-like and cementum-like structures, respectively. In addition, PDL-associated protein-1 expression was localized to the peripheral soft tissue, suggesting the formation of a rudimentary PDL-like structure. This study demonstrates that DPSCs and PDLSCs have an inherent ability to orchestrate the formation of a full tooth root-like structure. These organoids present a biomimetic model system to study cellular dynamics driving dental tissue repair or could be utilized therapeutically as biological dental implants.

Engineering three-dimensional bone macro-tissues by guided fusion of cell spheroids.

Bioassembly techniques for the application of scaffold-free tissue engineering approaches have evolved in recent years toward producing larger tissue equivalents that structurally and functionally mimic native tissues. This study aims to upscale a 3-dimensional bone in-vitro model through bioassembly of differentiated rat osteoblast (dROb) spheroids with the potential to develop and mature into a bone macrotissue. dROb spheroids in control and mineralization media at different seeding densities (1 × 104, 5 × 104, and 1 × 105 cells) were assessed for cell proliferation and viability by trypan blue staining, for necrotic core by hematoxylin and eosin staining, and for extracellular calcium by Alizarin red and Von Kossa staining. Then, a novel approach was developed to bioassemble dROb spheroids in pillar array supports using a customized bioassembly system. Pillar array supports were custom-designed and printed using Formlabs Clear Resin® by Formlabs Form2 printer. These supports were used as temporary frameworks for spheroid bioassembly until fusion occurred. Supports were then removed to allow scaffold-free growth and maturation of fused spheroids. Morphological and molecular analyses were performed to understand their structural and functional aspects. Spheroids of all seeding densities proliferated till day 14, and mineralization began with the cessation of proliferation. Necrotic core size increased over time with increased spheroid size. After the bioassembly of spheroids, the morphological assessment revealed the fusion of spheroids over time into a single macrotissue of more than 2.5mm in size with mineral formation. Molecular assessment at different time points revealed osteogenic maturation based on the presence of osteocalcin, downregulation of Runx2 (p < 0.001), and upregulated alkaline phosphatase (p < 0.01). With the novel bioassembly approach used here, 3D bone macrotissues were successfully fabricated which mimicked physiological osteogenesis both morphologically and molecularly. This biofabrication approach has potential applications in bone tissue engineering, contributing to research related to osteoporosis and other recurrent bone ailments.

The cell-assembled extracellular matrix: A focus on the storage stability and terminal sterilization of this human "bio" material.

The Cell-Assembled extracellular Matrix (CAM) is an attractive biomaterial because it provided the backbone of vascular grafts that were successfully implanted in patients, and because it can now be assembled in "human textiles". For future clinical development, it is important to consider key manufacturing questions. In this study, the impact of various storage conditions and sterilization methods were evaluated. After 1 year of dry frozen storage, no change in mechanical nor physicochemical properties were detected. However, storage at 4°C and room temperature resulted in some mechanical changes, especially for dry CAM, but physicochemical changes were minor. Sterilization modified CAM mechanical and physicochemical properties marginally except for hydrated gamma treatment. All sterilized CAM supported cell proliferation. CAM ribbons were implanted subcutaneously in immunodeficient rats to assess the impact of sterilization on the innate immune response. Sterilization accelerated strength loss but no significant difference could be shown at 10 months. Very mild and transient inflammatory responses were observed. Supercritical CO2 sterilization had the least effect. In conclusion, the CAM is a promising biomaterial since it is unaffected by long-term storage in conditions available in hospitals (hydrated at 4°C), and can be sterilized terminally (scCO2) without compromising in vitro nor in vivo performance. STATEMENT OF SIGNIFICANCE: In the field of tissue engineering, the use of extracellular matrix (ECM) proteins as a scaffolding biomaterial has become very popular. Recently, many investigators have focused on ECM produced by cells in vitro to produce unprocessed biological scaffolds. As this new kind of "biomaterial" becomes more and more relevant, it is critical to consider key manufacturing questions to facilitate future transition to the clinic. This article presents an extensive evaluation of long-term storage stability and terminal sterilization effects on an extracellular matrix assembled by cells in vitro. We believe that this article will be of great interest to help tissue engineers involved in so-called scaffold-free approaches to better prepare the translation from benchtop to bedside.

3D bioprinting and scaffold-free strategies for fabrication of multi-cellular tissues or organoids

The biofabrication of multi-cellular tissues or organoids (MTOs) has been challenging in regenerative medicine for decades. Currently, two primary technological approaches are being explored: scaffold-based strategies utilizing three-dimensional (3D) bioprinting techniques and scaffold-free strategies employing bioassembly techniques. 3D bioprinting techniques include jetting-based, extrusion-based, and vat photopolymerization-based methods, and bioassembly techniques include Kenzan, fluid-based manipulation and microfluid, bioprinting-assisted tissue emergence, and aspiration-assisted technology methods. Scaffold-based strategies primarily concentrate on the construction of scaffold structures to provide an extracellular environment, while scaffold-free strategies primarily emphasize the assembly methods of building blocks. Different biofabrication technologies have their advantages and limitations. This review provides an overview of the mechanisms, advantages, and limitations of scaffold-based and scaffold-free strategies in tissue engineering. It also compares the strengths and weaknesses of these two strategies, along with their respective suitability under different conditions. Moreover, the significant challenges in the future development of convergence strategies, specifically the integration of scaffold-based and scaffold-free approaches, are examined in an objective manner. This review concludes that integrating scaffold-based and scaffold-free strategies could overcome the problems in the biofabrication of MTOs. A novel fabrication method, the BioMicroMesh method, is proposed based on the convergence strategy. Concurrently, the development of a desktop-scale integrated intelligent biofabrication device, the BioMicroMesh system, is underway. This system is tailored to the BioMicroMesh method and incorporates cell aggregate spheroids preparation, 3D bioprinting, bioassembly, and multi-organoid co-culture functions, providing an objective perspective on its capabilities.

Engineering High-Quality Cartilage Microtissues Using Hydrocortisone Functionalized Microwells.

Engineering clinically relevant musculoskeletal tissues at a human scale is a considerable challenge. Developmentally inspired scaffold-free approaches for engineering cartilage tissues have shown great promise in recent years, enabling the generation of highly biomimetic tissues. Despite the relative success of these approaches, the absence of a supporting scaffold or hydrogel creates challenges in the development of large-scale tissues. Combining numerous scaled-down tissue units (herein termed microtissues) into a larger macrotissue represents a promising strategy to address this challenge. The overall success of such approaches, however, relies on the development of strategies which support the robust and consistent chondrogenic differentiation of clinically relevant cell sources such as mesenchymal stem/stromal cells (MSCs) within microwell arrays to biofabricate numerous microtissues rich in cartilage-specific extracellular matrix components. In this article, we first describe a simple method to manufacture cartilage microtissues at various scales using novel microwell array stamps. This system allows the rapid and reliable generation of cartilage microtissues and can be used as a platform to study microtissue phenotype and development. Based on the unexpected discovery that Endothelial Growth Medium (EGM) enhanced MSC aggregation and chondrogenic capacity within the microwell arrays, this work also sought to identify soluble factors within the media capable of supporting robust differentiation using heterogeneous MSC populations. Hydrocortisone was found to be the key factor within EGM that enhanced the chondrogenic capacity of MSCs within these microwell arrays. This strategy represents a promising means of generating large numbers of high-quality, scaffold-free cartilage microtissues for diverse biofabrication applications. Impact statement This study addresses a key challenge facing emerging modular biofabrication strategies that use microtissues as biological building blocks. Namely, achieving the necessary robust and consistent differentiation of clinically relevant cell sources, for example, mesenchymal stem/stromal cells (MSCs), and the accumulation of sufficient tissue-specific extracellular matrix (ECM) to engineer tissue of scale. We achieved this by establishing hydrocortisone as a simple and potent method for improving MSC chondrogenesis, resulting in the biofabrication of high-quality (ECM rich) cartilage microtissues. These findings could enable the generation of more scalable engineered cartilage by ensuring the formation of high-quality microtissue building blocks generated using heterogeneous MSC populations.

Three dimensional models of dedifferentiated liposarcoma cell lines: scaffold-based and scaffold-free approaches.

Sarcomas are rare malignancies, the number of reports is limited, and this rarity makes further research difficult even though liposarcoma is one of major sarcomas. 2D cell culture remains an important role in establishing basic tumor biology research, but its various shortcomings and limitations are still of concern, and it is now well-accepted that the behavior of 3D-cultured cells is more reflective of in vivo cellular responses compared to 2D models. This study aimed to establish 3D cell culture of liposarcomas using two different methods: scaffold-based (Matrigel extracellular matrix [ECM] scaffold method) and scaffold-free (Ultra-low attachment [ULA] plate). Lipo246, Lipo224 and Lipo863 cell lines were cultured, and distinctive differences in structures were observed in Matrigel 3D model: Lipo224 and Lipo863 formed spheroids, whereas Lipo246 grew radially without forming spheres. In ULA plate approaches, all cell lines formed spheroids, but Lipo224 and Lipo863 spheroids showed bigger size and looser aggregation than Lipo246. Formalin fixed, paraffin embedded (FFPE) blocks were obtained from all 3D models, confirming the spheroid structures. The expression of MDM2, Ki-67 positivity and MDM2 amplification were confirmed by IHC and DNAscope™, respectively. Protein and DNA were extracted from all samples and MDM2 upregulation was confirmed by western blot and qPCR analysis. After treatment with MDM2 inhibitor SAR405838, DDLPS spheroids demonstrated different sensitivity patterns from 2D models. Taken together, we believed that 3D models would have a possibility to provide us a new predictability of efficacy and toxicity, and considered as one important process in in vitro pre-clinical phase prior to moving forward to clinical trials.

Technological advances in three-dimensional skin tissue engineering

Abstract Tissue engineering is an enabling technology that can be used to repair, replace, and regenerate different types of biological tissues and holds great potential in various biomedical applications. As the first line of defense for the human body, the skin has a complex structure. When skin is injured by trauma or disease, the skin tissues may regenerate under natural conditions, though often resulting in irreversible and aesthetically unpleasant scarring. The development of skin tissue engineering strategies was reviewed. Although the traditional approaches to skin tissue engineering have made good progress, they are still unable to effectively deal with large-area injuries or produce full-thickness grafts. In vitro three-dimensional (3D) skin constructs are good skin equivalent substitutes and they have promoted many major innovative discoveries in biology and medicine. 3D skin manufacturing technology can be divided into two categories: scaffold-free and scaffold-based. The representatives of traditional scaffold-free approaches are transwell/Boyden chamber approach and organotypic 3D skin culture. Because of its low cost and high repeatability, the scaffold-free 3D skin model is currently commonly used for cytotoxicity analysis, cell biochemical analysis, and high-throughput cell function. At present, many drug experiments use artificial skin developed by traditional approaches to replace animal models. 3D bioprinting technology is a scaffold-based approach. As a novel tissue manufacturing technology, it can quickly design and build a multi-functional human skin model. This technology offers new opportunities to build tissues and organs layer by layer, and it is now used in regenerative medicine to meet the increasing need for tissues and organs suitable for transplantation. 3D bioprinting can generate skin substitutes with improved quality and high complexity for wound healing and in vitro disease modeling. In this review, we analyze different types of conventional techniques to engineer skin and compare them with 3D bioprinting. We also summarized different types of equipment, bioinks, and scaffolds used in 3D skin engineering. In these skin culture techniques, we focus on 3D skin bioprinting technology. While 3D bioprinting technology is still maturing and improvements to the techniques and protocols are required, this technology holds great promise in skin-related applications.

Biofabrication of Human Skin with Its Appendages.

Much effort has been made to generate human skin organ in the laboratory. Yet, the current models are limited due to the lack of many critical biological and structural features of the skin. Importantly, these in vitro models lack appendages and fail to recapitulate the whole human skin construction. Thus, engineering a human skin with the capacity to generate all components, including appendages, is a major challenge. This review intends to provide an update on the recent efforts underway to regenerate appendage-bearing skin organs based on scaffold-free and scaffold-based bioengineering approaches. Although the mouse skin equivalents containing hair follicles, sebaceous glands, and sweat glands have been established in vitro, there has been limited success in humans. A combination of biofabricated matrices and cell aggregates, such as organoids, can pave the way for generating skin substitutes with human-like biological, structural, and physical features. Accordingly, the formation of human skin organoids and reconstruction of vascularized skin equipped with immune cells prompt calls for more scientific research. The generation of appendage-bearing skin substitutes can be applied in practice for wound healing, hair restoration, and scar treatment.

Bone Regeneration Using Autologous Adipose-Derived Stem Cell Spheroid Complex

Bone defects require reconstruction using various biomaterials or non-biological materials. Stem cell spheroids can be used for scaffold-free approaches for osteogenesis. We set up a culture method for creating an optimal osteogenic adipose-derived stem cell (ADSC) spheroid complex by measuring the expression of protein in a sequential series of culture media. After culturing ADSC spheroids for 24 hours in DMEM, the spheroids were cultured in ascorbic acid-containing medium for five days followed by osteoblast differentiation medium. One day after exchanging to osteoblast differentiation medium, spheroids were collected and cultured for four days to obtain a spheroid complex. Each culture period was determined by analyzing the expression of collagen type I, alkaline phosphatase and integrin α5 to maximize the activity of ADSC spheroids. The expression of collagen type I increased significantly in ascorbic acid-containing medium (p &lt; 0.05) compared with control medium on day five, suggesting that culturing spheroids in ascorbic acid increases collagen synthesis. RNA was extracted from ADSC spheroids after 1, 3, 5, and 7 days in each medium and RT-PCR was performed to measure integrin α5 expression. The expression was transiently high on the first day of osteoblast differentiation culture and then gradually decreased. Osteoblast differentiation medium enhanced cell adhesion in spheroids. An in vivo study confirmed the osteogenic potential of the ADSC spheroid complex created by the established protocol. The ADSC spheroid complex stimulated bone regeneration and will be applied to the treatment of large bone defects.

Large-Scale, Automated Production of Adipose-Derived Stem Cell Spheroids for 3D Bioprinting.

Adipose-derived stromal/stem cells (ASCs) are a subpopulation of cells found in the stromal vascular fraction of human subcutaneous adipose tissue recognized as a classical source of mesenchymal stromal/stem cells. Many studies have been published with ASCs for scaffold-based tissue engineering approaches, which mainly explored the behavior of these cells after their seeding on bioactive scaffolds. However, scaffold-free approaches are emerging to engineer tissues in vitro and in vivo, mainly by using spheroids, to overcome the limitations of scaffold-based approaches. Spheroids are 3D microtissues formed by the self-assembly process. They can better mimic the architecture and microenvironment of native tissues, mainly due to the magnification of cell-to-cell and cell-to-extracellular matrix interactions. Recently, spheroids are mainly being explored as disease models, drug screening studies, and building blocks for 3D bioprinting. However, for 3D bioprinting approaches, numerous spheroids, homogeneous in size and shape, are necessary to biofabricate complex tissue and organ models. In addition, when spheroids are produced automatically, there is little chance for microbiological contamination, increasing the reproducibility of the method. The large-scale production of spheroids is considered the first mandatory step for developing a biofabrication line, which continues in the 3D bioprinting process and finishes in the full maturation of the tissue construct in bioreactors. However, the number of studies that explored the large-scale ASC spheroid production are still scarce, together with the number of studies that used ASC spheroids as building blocks for 3D bioprinting. Therefore, this article aims to show the large-scale production of ASC spheroids using a non-adhesive micromolded hydrogel technique spreading ASC spheroids as building blocks for 3D bioprinting approaches.

Recent approaches towards bone tissue engineering.

Bone tissue engineering approaches have evolved towards addressing the challenges of tissue mimetic requirements over the years. Different strategies have been combining scaffolds, cells, and biologically active cues using a wide range of fabrication techniques, envisioning the mimicry of bone tissue. On the one hand, biomimetic scaffold-based strategies have been pursuing different biomaterials to produce scaffolds, combining with diverse and innovative fabrication strategies to mimic bone tissue better, surpassing bone grafts. On the other hand, biomimetic scaffold-free approaches mainly foresee replicating endochondral ossification, replacing hyaline cartilage with new bone. Finally, since bone tissue is highly vascularized, new strategies focused on developing pre-vascularized scaffolds or pre-vascularized cellular aggregates have been a motif of study. The recent biomimetic scaffold-based and scaffold-free approaches in bone tissue engineering, focusing on materials and fabrication methods used, are overviewed herein. The biomimetic vascularized approaches are also discussed, namely the development of pre-vascularized scaffolds and pre-vascularized cellular aggregates.

The Developing Field of Scaffold-Free Tissue Engineering for Articular Cartilage Repair.

Articular cartilage is critical for proper joint mobility as it provides a smooth and lubricated surface between articulating bones and allows for transmission of load to underlying bones. Extended wear or injury of this tissue can result in osteoarthritis, a degenerative disease affecting millions across the globe. Because of its low regenerative capacity, articular cartilage cannot heal on its own and effective treatments for injured joint restoration remain a challenge. Strategies in tissue engineering have been demonstrated as potential therapeutic approaches to regenerate and repair damaged articular cartilage. Although many of these strategies rely on the use of an exogenous three-dimensional scaffolds to regenerate cartilage, scaffold-free tissue engineering provides numerous advantages over scaffold-based methods. This review highlights the latest advancements in scaffold-free tissue engineering for cartilage and the potential for clinical translation. Impact statement Although scaffolds are often incorporated into cartilage tissue engineering strategies as a three-dimensional architecture conducive to tissue formation, scaffold-free approaches are increasingly recognized for their ability to better recapitulate the native tissue formation process. Recent advancements in scaffold-free tissue engineering and success in clinical trials demonstrate the potential of these techniques to serve as viable therapies for repairing and restoring damaged cartilage.

Bioprinting of biomimetic self-organised cartilage with a supporting joint fixation device

Despite sustained efforts, engineering truly biomimetic articular cartilage (AC) via traditional top-down approaches remains challenging. Emerging biofabrication strategies, from 3D bioprinting to scaffold-free approaches that leverage principles of cellular self-organisation, are generating significant interest in the field of cartilage tissue engineering as a means of developing biomimetic tissue analogues in vitro. Although such strategies have advanced the quality of engineered cartilage, recapitulation of many key structural features of native AC, in particular a collagen network mimicking the tissue’s ‘Benninghoff arcade’, remains elusive. Additionally, a complete solution to fixating engineered cartilages in situ within damaged synovial joints has yet to be identified. This study sought to address both of these key challenges by engineering biomimetic AC within a device designed to anchor the tissue within a synovial joint defect. We first designed and fabricated a fixation device capable of anchoring engineered cartilage into the subchondral bone. Next, we developed a strategy for inkjet printing porcine mesenchymal stem/stromal cells (MSCs) into this supporting fixation device, which was also designed to provide instructive cues to direct the self-organisation of MSC condensations towards a stratified engineered AC. We found that a higher starting cell-density supported the development of a more zonally defined collagen network within the engineered tissue. Dynamic culture was implemented to further enhance the quality of this engineered tissue, resulting in an approximate 3 fold increase in glycosaminoglycan and collagen accumulation. Ultimately this strategy supported the development of AC that exhibited near-native levels of glycosaminoglycan accumulation (>5% WW), as well as a biomimetic collagen network organisation with a perpendicular to a parallel fibre arrangement (relative to the tissue surface) from the deep to superficial zones via arcading fibres within the middle zone of the engineered tissue. Collectively, this work demonstrates the successful convergence of novel biofabrication methods, bioprinting strategies and culture regimes to engineer a hybrid implant suited to resurfacing AC defects.

Hard Dental Tissues Regeneration-Approaches and Challenges.

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

The Evolution of Fabrication Methods in Human Retina Regeneration

Optic nerve and retinal diseases such as age-related macular degeneration and inherited retinal dystrophies (IRDs) often cause permanent sight loss. Currently, a limited number of retinal diseases can be treated. Hence, new strategies are needed. Regenerative medicine and especially tissue engineering have recently emerged as promising alternatives to repair retinal degeneration and recover vision. Here, we provide an overview of retinal anatomy and diseases and a comprehensive review of retinal regeneration approaches. In the first part of the review, we present scaffold-free approaches such as gene therapy and cell sheet technology while in the second part, we focus on fabrication techniques to produce a retinal scaffold with a particular emphasis on recent trends and advances in fabrication techniques. To this end, the use of electrospinning, 3D bioprinting and lithography in retinal regeneration was explored.

Scaffold-free, Label-free, and Nozzle-free Magnetic Levitational Bioassembler for Rapid Formative Biofabrication of 3D Tissues and Organs.

Scaffolding is the conceptual framework of conventional tissue engineering. Over the past decade, scaffold-free approaches as a potential alternative to classic scaffold-based methods have emerged, and scaffold-free magnetic levitational tissue engineering (magnetic force-based tissue engineering [Mag-TE]) is a type of this novel tissue engineering strategy. However, Mag-TE is often based on the use of potentially toxic magnetic nanoparticles. Scaffold-free and label-free magnetic levitational bioassembly do not employ magnetic nanoparticles and thus, the potential toxicity of magnetic nanoparticles can be avoided. In this short review, we describe the conceptual foundation of scaffold-free, label-free, and nozzle-free formative biofabrication using magnetic fields as “scaffields.” The design and implementation of “Organ.Aut,” the first commercial magnetic levitational bioassembler, and the potential applications of magnetic bioassembler are discussed as well.

Promising Scaffold-Free Approaches in Translational Dentistry.

Regenerative medicine has recently improved the principal therapies in several medical fields. In the past ten years, the continuous search for novel approaches to treat the most common dental pathologies has developed a new branch called regenerative dentistry. The main research fields of translational dentistry involve biomimetic materials, orally derived stem cells, and tissue engineering to populate scaffolds with autologous stem cells and bioactive growth factors. The scientific literature has reported two main research trends in regenerative dentistry: scaffold-based and scaffold-free approaches. This article aims to critically review the main biological properties of scaffold-free regenerative procedures in dentistry. The most impactful pros and cons of the exosomes, the leading role of hypoxia-based mesenchymal stem cells (MSCs), and the strategic use of heat shock proteins in regenerative dentistry will be highlighted and discussed in terms of the use of such tools in dental regeneration and repair.

Addressing Patient Specificity in the Engineering of Tumor Models.

Cancer treatment is challenged by the heterogeneous nature of cancer, where prognosis depends on tumor type and disease stage, as well as previous treatments. Optimal patient stratification is critical for the development and validation of effective treatments, yet pre-clinical model systems are lacking in the delivery of effective individualized platforms that reflect distinct patient-specific clinical situations. Advances in cancer cell biology, biofabrication, and microengineering technologies have led to the development of more complex in vitro three-dimensional (3D) models to act as drug testing platforms and to elucidate novel cancer mechanisms. Mostly, these strategies have enabled researchers to account for the tumor microenvironment context including tumor-stroma interactions, a key factor of heterogeneity that affects both progression and therapeutic resistance. This is aided by state-of-the-art biomaterials and tissue engineering technologies, coupled with reproducible and high-throughput platforms that enable modeling of relevant physical and chemical factors. Yet, the translation of these models and technologies has been impaired by neglecting to incorporate patient-derived cells or tissues, and largely focusing on immortalized cell lines instead, contributing to drug failure rates. While this is a necessary step to establish and validate new models, a paradigm shift is needed to enable the systematic inclusion of patient-derived materials in the design and use of such models. In this review, we first present an overview of the components responsible for heterogeneity in different tumor microenvironments. Next, we introduce the state-of-the-art of current in vitro 3D cancer models employing patient-derived materials in traditional scaffold-free approaches, followed by novel bioengineered scaffold-based approaches, and further supported by dynamic systems such as bioreactors, microfluidics, and tumor-on-a-chip devices. We critically discuss the challenges and clinical prospects of models that have succeeded in providing clinical relevance and impact, and present emerging concepts of novel cancer model systems that are addressing patient specificity, the next frontier to be tackled by the field.

Cellular Spheroids of Mesenchymal Stem Cells and Their Perspectives in Future Healthcare

Intrinsic cellular properties of several types of cells are dramatically altered as the culture condition shifts from two-dimensional (2D) to three-dimensional (3D) environment. Currently, several lines of evidence have demonstrated the therapeutic potential of mesenchymal stem cells (MSCs) in regenerative medicine. MSCs not only replenish the lost cells, they also promote the regeneration of impaired tissues by modulating the immune responses. Following the development of 3D cell culture, the enhanced therapeutic efficacy of spheroid-forming MSCs have been identified in several animal disease models by promoting differentiation or trophic factor secretion, as compared to planar-cultured MSCs. Due to the complicated and multifunctional applications in the medical field, MSCs are recently named as medicinal signaling cells. In this review, we summarize the predominant differences of cell–environment interactions for the MSC spheroids formed by chitosan-based substrates and other scaffold-free approaches. Furthermore, several important physical and chemical factors affecting cell behaviors in the cell spheroids are discussed. Currently, the understanding of MSCs spheroid interactions is continuously expanding. Overall, this article aims to review the broad advantages and perspectives of MSC spheroids in regenerative medicine and in future healthcare.