Sandmeyer Reactions Research Articles

Borylated Cymantrenes and Tromancenium Salts with Unusual Reactivity.

In continuation of our study of the chemistry of cationic (cycloheptatrienyl)(cyclopentadienyl)manganese(I) sandwich complexes, so-called “tromancenium” salts, we report here on their boron-substituted derivatives focusing on useful boron-mediated synthetic applications. Transmetalation of lithiated tricarbonyl(cyclopentadienyl)manganese (“cymantrene”) with boric or diboronic esters affords monoborylated cymantrenes that are converted by advanced high-power LED photosynthesis followed by oxidation with tritylium to their 8-boron-substituted tromancenium complexes. These new functionalized tromancenium salts are fully characterized by 1H/11B/13C/19F/55Mn NMR, IR, UV–vis, HRMS spectroscopy, single-crystal structure analysis (XRD) and cyclic voltammetry (CV). IR spectra were thoroughly analyzed by density functional theory (DFT) on the harmonic approximation in qualitative agreement of calculated vibrations with experimental values. Uncommon chemical reactivity of these borylated tromancenium salts is observed, due to the strongly electron-withdrawing cationic tromancenium moiety. No Suzuki-type cross-coupling reactions proved so far achievable, but unusual copper-promoted amination with sodium azide under microwave irradiation is possible. Diazoniation of aminotromancenium affords an extremely reactive dicationic tromanceniumdiazonium salt, which is too labile for standard Sandmeyer reactions, in contrast to analogous chemistry of cobaltocenium salts. Overall, borylated tromancenium salts display unexpected and intriguing chemical properties with the potential for novel synthetic applications in future work.

Photochemical Sandmeyer-type Halogenation of Arenediazonium Salts.

Trihalide salts were found to efficiently promote photochemical dediazotizing halogenations of diazonium salts. In contrast to classical Sandmeyer reactions, no metal catalysts are required to achieve high yields and outstanding selectivities for halogenation over competing hydridodediazotization. Convenient protocols are disclosed for synthetically meaningful brominations, iodinations, and chlorinations of diversely functionalized derivatives.

Rhodocenium Functionalization Enabled by Half-Sandwich Capping, Zincke Reaction, Diazoniation and Sandmeyer Chemistry.

In continuation of our exploration of metallocenium chemistry we report here on innovative ways toward monofunctionalized rhodocenium salts applying half‐sandwich capping reactions of cyclopentadienyl rhodium(III) halide synthons with cyclopentadienyl ylides containing pyridine, phosphine or dinitrogen leaving groups, followed by Zincke and Sandmeyer reactions. Thereby amino, diazonio, bromo, azido and iodo rhodocenium salts containing valuable functional groups are accessible for the first time. Target compounds were characterized by spectroscopic (1H/13C/103Rh‐NMR, IR, HR‐MS), structural (single crystal XRD) and electrochemical (CV) methods and their properties were compared to those of isoelectronic cobaltocenium compounds. These new functionalized rhodocenium complexes significantly expand the so far extremely limited chemical space of rhodocenium salts with promising options for the future development in the area of rhodocenium chemistry.

Cross-Coupling Reactions of Nitroarenes

Cross-coupling reactions are powerful synthetic tools to construct diverse chemical bonds often found in, for example, advanced materials and pharmaceuticals. Since their discovery, haloarenes have habitually been used as electrophilic coupling partners both in academic and industrial contexts. However, concerning the efficiency and the often-negative environmental impact of haloarene-based cross-coupling processes, more readily available, inexpensive, and environmentally friendly electrophiles have been explored.Nitroarenes, for example, are obtained from the facile nitration of aromatic compounds and, thus, represent one of the most easy-to-access feedstock electrophiles. Furthermore, their electron-deficient arene core can be functionalized easily and site-selectively through a wide variety of reactions. Yet, despite these advantages and even though the direct transformation of the NO2 group would be an attractive option in cross-coupling chemistry, it has so far remained difficult to convert nitroarenes via a cleavage of the Ar-NO2 bond given the inherent reactivity (or the lack thereof) of the nitro group. Such denitrative conversion has been performed by a conventional sequence of reduction, diazotization, and Sandmeyer reactions, which severely lacks efficiency and generality.This Account summarizes our recent research progress on cross-coupling reactions that employ nitroarenes as electrophiles. First, we developed the Suzuki-Miyaura coupling of nitroarenes using a palladium/BrettPhos catalyst. This reaction proceeds via an (at the time) unprecedented oxidative addition of the Ar-NO2 bond, which was supported by experimental results and theoretical calculations. A widely accepted catalytic cycle for Pd-catalyzed cross-couplings has since been extended to include nitroarenes as electrophiles, which significantly increases substrate generality. Second, this denitrative coupling protocol was applied to various bond-forming reactions, namely, Buchwald-Hartwig amination, etherification, and hydrogenation reactions. Such diversification has enhanced the utility of nitroarenes as cross-coupling partners. To develop each reaction, it was necessary to modify the reaction conditions as required to overcome the obstacles deriving from nitro functionality including transmetalation and side reactions, as well as oxidative addition. Third, we designed a new Pd/NHC catalyst that exhibits higher activity than Pd/BrettPhos. The improved performance of Pd/NHC system was supported by its strong electron-donicity and structural robustness, and it allows the reduction of the catalyst loading significantly, thus increasing the efficacy and practicality of this method.The field of nitroarene-based cross-coupling has just started to flourish. In addition to our original work, several research groups have already adopted Pd/BrettPhos or Pd/NHC catalysts to develop new denitrative functionalizations. The utility of nitroarenes in the context of organic synthesis should be now revisited.

Stable and Storable N(CF3 )2 Transfer Reagents.

Fluorinated groups are essential for drug design, agrochemicals, and materials science. The bis(trifluoromethyl)amino group is an example of a stable group that has a high potential. While the number of molecules containing perfluoroalkyl, perfluoroalkoxy, and other fluorinated groups is steadily increasing, examples with the N(CF3)2 group are rare. One reason is that transfer reagents are scarce and metal‐based storable reagents are unknown. Herein, a set of CuI and AgI bis(trifluoromethyl)amido complexes stabilized by N‐ and P‐donor ligands with unprecedented stability are presented. The complexes are stable solids that can even be manipulated in air for a short time. They are bis(trifluoromethyl)amination reagents as shown by nucleophilic substitution and Sandmeyer reactions. In addition to a series of benzylbis(trifluoromethyl)amines, 2‐bis(trifluoromethyl)amino acetate was obtained, which, upon hydrolysis, gives the fluorinated amino acid N,N‐bis(trifluoromethyl)glycine.

Two-Phase Electrochemical Generation of Aryldiazonium Salts: Application in Electrogenerated Copper-Catalyzed Sandmeyer Reactions.

The electrochemical generation of aryldiazonium salts from nitroarenes in a two-phase system (ethyl acetate/water) was reported for the first time. Some compounds including azo, azosulfone, and arylazides were prepared in good yields with good purity. Cathodically generated aryldiazoniums and anodically produced copper(Ι) ions were used to perform Sandmeyer reactions. To improve the method, an H-type self-driving cell equipped with a Zn rod as an anode was introduced and used for two-phase aryldiazonium production.

Recent Advances in the Synthesis of Aryl Nitrile Compounds

AbstractAryl nitriles are widely found in natural products, pharmaceuticals, agrochemicals, dyes, and herbicides. Moreover, because the cyano group can be easily converted into various functional groups, aryl nitriles are important intermediates in synthetic organic chemistry. Consequently, the development of new methodologies for the synthesis of aryl nitriles is of significant interest. The traditional methods for their synthesis include Sandmeyer reactions, Rosenmund–von Braun reactions, as well as dehydration reactions of aldoximes and amides. In recent years, numerous efforts have been devoted to transition metal‐catalyzed cyanation reactions of aryl (pseudo)halides, organometallic reagents and aryl C–H bonds. A number of cyanating reagents have been explored for such transformations, including metal cyanides and organic cyano group sources. In addition, styrenes and aryl‐substituted alkynes are successfully converted into aryl nitriles through carbon‐carbon double or triple bond cleavage. Various benzylic compounds have also been used for the synthesis of aryl nitriles, such as benzylic halides, alcohols, amines and azides. Furthermore, the direct conversion of the methyl group of toluene derivatives into a cyano group has also drawn attention. In this critical review, we summarize the recent developments and useful applications in this field and reaction mechanisms are also briefly discussed.magnified image

ChemInform Abstract: Nucleophile Promoted Gold Redox Catalysis with Diazonium Salts: C—Br, C—S and C—P Bond Formation Through Catalytic Sandmeyer Coupling.

Gold-catalyzed C-heteroatom (C–X) coupling reactions are evaluated without using sacrificial oxidants. Vital to the success of this methodology is the nucleophile-assisted activation of aryldiazonium salts, which could be an effective oxidant for converting Au(I) to Au(III) even without the addition of an assisting ligand or photocatalyst. By accelerating the reaction kinetics to outcompete C–C homo-coupling or diazonium dediazoniation, gold-catalyzed Sandmeyer reactions were achieved with different nucleophiles, forming C–Br, C–S and C–P bonds in high yields and selectivities.

Reactions with Aminobenzoic Acids via Diazonium Salts Open New Routes to Bio-Derived Aromatics

Aromatics have a broad application in our everyday life ranging from plastics, coatings and fibres, to food and pharmaceuticals. To date the bulk of these aromatics is derived from naphtha-based pet-rochemistry. However, recent progress in the fermentative production of metabolites using renew-able resources and engineered microbes has enabled the production of bio-precursors, such as 4-amino benzoic acid (pABA) and 2-amino benzoic acid (oABA). In this work we explored the feasibility of Sandmeyer reactions for the conversion of pABA to terephthalic and oABA salicylic acid, providing two very important platform chemicals for the chemical and pharmaceutical industries. We could demonstrate that both acids can be obtained from the amino benzoic acids derived from the shikimate pathway in microbes and plants. Good conversions could be achieved using Sandmeyer reactions at mild conditions with biodegradable reagents and without organic solvents.

Nucleophile promoted gold redox catalysis with diazonium salts: C-Br, C-S and C-P bond formation through catalytic Sandmeyer coupling.

Gold-catalyzed C-heteroatom (C-X) coupling reactions are evaluated without using sacrificial oxidants. Vital to the success of this methodology is the nucleophile-assisted activation of aryldiazonium salts, which could be an effective oxidant for converting Au(i) to Au(iii) even without the addition of an assisting ligand or photocatalyst. By accelerating the reaction kinetics to outcompete C-C homo-coupling or diazonium dediazoniation, gold-catalyzed Sandmeyer reactions were achieved with different nucleophiles, forming C-Br, C-S and C-P bonds in high yields and selectivities.

Synthesis and Property of New Blue Emitting Materials with Bulky Side Group

Two emitting compounds, 9,10-bis-[1,1′;3′,1′′]terphenyl-5′-yl-1,5-di-o-tolyl-anthracene [TP-DTA-TP] and 9,10-bis-phenyl[1,1′;3′,1′′]triphenyl-5′-yl-1,5-di-o-tolyl-anthracene [TPB-DTA-TPB] based on new twisted core moiety were synthesized through boration, Suzuki reaction, and Sandmeyer reactions. EL performance was improved by varying the chemical structure of the side group. Physical properties such as optical, electrochemical, and electroluminescent properties were investigated. Synthesized compounds were used as an EML in OLED device: ITO / 2-TNATA (60nm) / NPB (15nm)/ TP-DTA-TP or TPB-DTA-TPB (35 nm) / Alq3 (20nm) / LiF (1nm) / Al (200nm). It was found that TPB-DTA-TPB showed higher luminance efficiency and better C.I.E. value than TP-DTA-TP device.

Polyfluorinated Functionalized m-Terphenyls. New Substituents and Ligands in Organometallic Synthesis

The synthesis and structural characterization of polyfluorinated arenes 2,4,6-(C6F5)3C6H2X and 2,6-(C6F5)2-4-BrC6H2X (X = NO2, Cl, Br) obtained in the Ullmann-type cross coupling reaction is reported. The nitro derivatives were reduced to the aromatic amines. The α-diimine [2,4,6-(C6F5)3C6H2NCMe]2 and 2,4,6-(C6F5)3C6H2I were obtained in condensation and Sandmeyer reactions, respectively, from the corresponding amine. The syntheses of 2,4,6-(C6F5)3C6H2NHC(O)H, 2,4,6-(C6F5)3C6H2NC, and 2,4,6-(C6F5)3C6H2Si(X)Me2 (X = H, F, Cl) are also described.

Non-Classical Transformation of Benzendiazonium Hydrogen Sulfates. Access to 1,3-Dimethylisochromeno[4,3-c]pyrazol-5(1H)-one, a Potential Benzodiazepine Receptor Ligand

The compound 2-((1,3-dimethyl-1H-pyrazol-5-yl)(methyl)carbamoyl)benzene-diazonium hydrogen sulfate (10) was reacted with copper sulfate and sodium chloride, in the presence of ascorbic acid as reducing agent, to afford a mixture of the chlorinated epimers 4′-chloro-2,2′,5′-trimethyl-2′,4′-dihydrospiro[isoindoline-1,3′-pyrazol]-3-one (18) and (19), the epimers 4′-hydroxy-2,2′,5′-trimethyl-2′,4′-dihydrospiro[isoindoline-1,3′-pyrazol]-3-one (20) and (21), and N-(1,3-dimethyl-1H-pyrazol-5-yl)benzamide (22). Under the foregoing conditions, diazonium salt 10 affords neither the 2-chloro-N-(1,3-dimethyl-1H-pyrazol-5-yl)-N-methylbenzamide (23) nor the tricyclic derivative 24, the classical products of the Sandmeyer and Pschorr reactions, respectively. Finally, by heating 20 at 210 °C the compound 1,3-dimethylisochromeno[4,3-c]pyrazol-5(1H)-one (24) was obtained. The transformation under the above conditions of 2-((4-chloro-3-methyl-1-phenyl-1H-pyrazol-5-yl)(methyl)carbamoyl)benzendiazonium hydrogen sulphate (11) afforded 4′,4′-dichloro-2,5′-dimethyl-2′-phenyl-2′,4′-dihydrospiro[isoindoline-1,3′-pyrazol]-3-one (29) as the sole reaction product.

Syntheses of terminally functionalized polyisobutylene derivatives using diazonium salts

AbstractA new strategy for the synthesis of end‐functionalized polyisobutylene (PIB) oligomers is detailed. Commercially available vinyl‐terminated PIB oligomers were modified to form aniline‐terminated PIB via an aromatic electrophilic substitution reaction. The PIB‐bound aryl amines so formed were then converted into diazonium salts using isopentyl nitrite and an acid in methylene chloride. These salts served as versatile intermediates in synthetic reactions affording azo dye‐containing PIB derivatives and other terminally‐functionalized PIB derivatives not readily available by other reactions. The advantages and limitations of various name reactions including diazo couplings, Sandmeyer reactions, dediazoniations, and Heck reactions are discussed. The kinetics of polar substitution reactions at the termini of these nonpolar oligomers and the effects of solvent on these reactions were also examined. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

An efficient microwave-assisted synthesis of dihydropyrazinones and bis-benzoylketones

Microwave-assisted modified Sandmeyer reactions of oximinoacetanilides, themselves obtained from substituted primary aromatic amines, in concentrated H 2SO 4 give isatins. N-Acetylisatins undergo ring cleavage and subsequent ring closing with alkanediamines in the presence of ethanol under MW irradiation to give the corresponding dihydropyrazinones in excellent yields. Modification of the reaction conditions affords bis-benzoylketones under MW irradiation.

Modification of Multi-Walled Carbon Nanotubes by Diels-Alder and Sandmeyer Reactions

Random (L) and aligned (A) multi-walled carbon nanotubes (MWNTs) were modified by Diels-Alder (DA) [4+2] cycloaddition, Sandmeyer (SM) reaction and by catalytic oxidation (OX). The properties of modified carbon nanotubes were studied by dispersability tests, elemental analysis, thermogravimetry/mass spectrometry, X-ray photoelectron spectroscopy, and NMR spectroscopy. The cycloaddition reaction could only be successfully performed with the L-MWNTs in molten and in solution state by using an aluminum chloride homogeneous catalyst. The efficiency and thermal stability of the solution phase cycloaddition were much higher than in the case of modification in the molten phase. The functionalization of both types of MWNTs by Sandmeyer reaction was carried out by copper(I) and iron(ll) ions that helped in the radical decomposition of diazonium salts. Successful functionalization of nanotubes is achieved by a long decomposition time of the thermally activated diazonium salts. To the contrary, in the case of radical decomposition of diazonium salts, the time is not a decisive parameter. The dispersability tests have proved the changes in the physical features of modified carbon nanotubes depending on the hydrophobic and hydrophilic character of the solvents. The presence of the modifying groups and their fragments from the functionalized MWNTs has been demonstrated by thermogravimetry/mass spectrometry (TG/MS). Relatively high concentration of sulfur atoms was detected by X-ray photoelectron spectroscopy in nanotubes modified by sulfur substituent groups. In the case of catalytic oxidation, the X-ray photoelectron spectroscopic signal of oxygen bound to nanotubes showed considerable change as compared to pristine nanotubes. Due to the high thermal stability of modified multi-walled carbon nanotubes, the functionalized derivatives are applicable in several industrial fields.

Sandmeyer reactions. Part 6.1 A mechanistic investigation into the reduction and ligand transfer steps of Sandmeyer cyanation

For Sandmeyer cyanation at 298 K in 50% v/v aqueous acetonitrile buffered at pH 8, absolute rate constants have been obtained for the reduction of 4-methoxybenzenediazonium tetrafluoroborate by the cyanocuprate(I) anions CuI(CN)43−, CuI(NCMe)(CN)32− and CuI(NCMe)2(CN)2− as (0.50 ± 0.05), (0.12 ± 0.03) and 0.0 dm3 mol−1 s−1, respectively. The relative reactivity of the two reactive cyanocuprates reflects the estimated difference in their standard reduction potentials. Ligand transfer to the aryl radical from the cyanocuprate(II) anions produced in the reaction occurs within the solvent cage. By use of radical clocks, first order rate constants of the order of 1 × 108 s−1 for ligand transfer between the caged reactants can be evaluated although the transfer rate may vary from one aryl radical to another. No difference was discerned in ligand transferring reactivity between the two cyanocuprate(II) complexes involved.

Sandmeyer reactions. Part 7.1 An investigation into the reduction steps of Sandmeyer hydroxylation and chlorination reactions

For Sandmeyer hydroxylation and chlorination in aqueous solution, the reduction steps have been investigated by means of correlation analyses of the effects of diazonium ion substitution on the rates of reduction. For simple hydroxylation, a change of behaviour between diazonium ions substituted by electron donor groups and those substituted by electron acceptor groups is interpreted as a change within an inner-sphere process from rate-determining electron transfer to rate-determining association of the reactants. By contrast, for citrate-promoted hydroxylation, a similar change in behaviour may be interpreted as a change between inner- and outer-sphere electron transfers. For chlorination, there is no mechanistic variation within the range of substituents examined but the pattern of behaviour is consistent with an inner-sphere mechanism. The various patterns of behaviour are rationalised in terms of the effects of diazonium ion substitution and catalyst ligation on the reduction potentials and self-exchange rates of the various reacting redox couples. Comparative correlation analyses of reductions and other electrophilic reactions of diazonium ions are used to support the arguments advanced in respect of Sandmeyer reduction steps. It is suggested that the CuI reductants react via a nucleophilic bridging ligand at the diazonium Nβ to give transient Z-adducts which are the precursor complexes and that activation for electron transfer involves rotation about the N–N bond.

Sandmeyer reactions. Part 5. Estimation of the rates of 1,5-aryl/aryl radical translocation and cyclisation during Pschorr fluorenone synthesis with a comparative analysis of reaction energetics

During the Pschorr cyclisation of 2-aroylphenyl radicals, a rearrangement occurs reversibly by 1,5-hydrogen transfer to give 2-benzoylaryl radicals. Rate constants of (1.2 ± 0.2) × 106 s−1 at 293 K are estimated for both the forward and back reactions in the equilibrium between 2-(4-methylbenzoyl)phenyl and 2-benzoyl-5-methylphenyl radicals. Assuming an empirical estimate of 1.6 × 10−2 dm3 mol−1 s−1 for the hypothetical rate of abstraction of hydrogen from benzene by phenyl radicals, the radical translocation is calculated to occur with a statistically corrected effective molarity of 2.2 × 108 mol dm−3. By contrast, the competing cyclisation, though occurring at a rate of (8.0 ± 0.9) × 105 s−1, exhibits an effective molarity of only 5.3 mol dm−3. The causes of these differences are analysed in terms of reaction mechanism.

Sandmeyer reactions. Part 4.1 An investigation into the cyclisation modes of Pschorr phenanthrene synthesis

Comparison of the cyclisation regiochemistries in the heterolysis and the copper-catalysed homolysis of methyl (E)-3-(2-diazoniophenyl)-2-(3-halophenyl)propenoate tetrafluoroborates indicates that the homolytic pathway involves direct closure of the six-membered ring and not a five-membered ring closure followed by ring expansion. From competition experiments in which homolytic cyclisation of the corresponding non-halogenated compound was run against hydrogen abstraction from hypophosphorous acid, a cyclisation rate constant kC = (3.0 ± 0.5) × 109 s–1 at ambient temperature was estimated which, when used in conjunction with a literature value for the homolytic phenylation of benzene, allows evaluation of a statistically corrected effective molarity of 2 × 104 mol dm–3 for homolytic Pschorr phenanthrene closure. Regioselectivity considerations imply that, by contrast, heterolytic Pschorr phenanthrene closure exhibits unit effective molarity. A mechanistic rationale is presented to explain these patterns of behaviour.