Biomechanical Role Research Articles

Exploring Mechanisms of Cranial Vault Development using a Coupled Turing‐Biomechanical Model

Bones of the mouse cranial vault are formed by differentiation of mesenchymal cells into osteoblasts, a process called intramembranous ossification that is primarily thought to be controlled by a cascade of reactions between extracellular molecules and cells that may be significantly guided by mechanical forces. In this study, we use a computational approach and an extensive experimental database to elucidate the role of biomechanics in morphogenesis of the cranial vault. We assume that the biochemical process can be modeled using Turing's reaction-diffusion model, a mathematical model describing the pattern formation controlled by interacting molecules (activators and inhibitors). In addition, we hypothesize that mechanical stimuli of the cells due to growth of the underlying brain contributes significantly to the process of cell differentiation. We have developed a coupled framework that incorporates these modeling constructs. The mathematical formulation was solved using the finite volume method. The computational domain and model parameters are determined using a large collection of experimental data that provides precise three-dimensional measures of mouse cranial geometry and cranial vault bone formation for specific embryonic time points. The results of this study suggest that mechanical strain contributes information to specific aspects of bone formation. Our mechanobiological model predicts some key features of cranial vault bone formation that were verified by experimental observations in normal case, including the relative location of ossification centers of the individual vault bones, the pattern of cranial vault bone growth over time, and the position of cranial vault sutures. Support or Funding Information Computations for this research were performed on the Pennsylvania State University's Institute for Cyber Science Advanced Cyber Infrastructure (ICS-ACI). This work was supported in part through instrumentation funded by a National Science Foundation grant OCI0821527, a Burroughs-Wellcome Fund 2013 Collaborative Research Travel Grant, Pennsylvania Department of Health using Tobacco Cure Funds, and by the National Institutes of Health grants R01DE022988 and P01HD078233. The model predicts the pattern of cranial vault bone growth. a) Computational prediction of the distribution of differentiating osteoblasts and cranial vault bone formation by embryonic day. b) Observed cranial vault bone formation and growth in embryonic mice. This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Gait mechanics contribute to exercise induced pain flares in knee osteoarthritis

BackgroundExercise-induced pain flares represent a significant barrier for individuals with knee osteoarthritis to meet physical activity recommendations. There is a need to understand factors that contribute to pain flares and the potential for the motor system to adapt and reduce joint loading should a flare occur. The study aim was to examine the impact of a bout of exercise on self-reported pain, walking mechanics and muscle co-contraction for participants with knee osteoarthritis.MethodsThirty-six adults (17 healthy older and 19 knee osteoarthritis) participated in this study. Self-reported pain, joint mechanics and muscle co-activation during gait at two self-selected speeds were collected before and after a 20-min preferred pace treadmill walk (20MTW).ResultsEight of nineteen osteoarthritis participants had a clinically significant pain flare response to the 20MTW. At baseline the participants that did not experience a pain flare had smaller knee flexion and total reaction moments compared to both the participants with pain flares (p = 0.02; p = 0.05) and controls (p < 0.001; p < 0.001). In addition, the 2nd peak knee adduction (p = 0.01) and internal rotation (p = 0.001) moments were smaller in the no flares as compared to controls. The pain flare participants differed from controls with smaller knee internal rotation moments (p = 0.03), but greater relative hamstrings (vs. quadriceps) and medial (vs. lateral) muscle activation (p = 0.04, p = 0.04) compared to both controls and no flare participants (p = 0.04, p = 0.007). Following the 20MTW there were greater decreases in the 1st and 2nd peak knee adduction (p = 0.03; p = 0.02), and internal rotation (p = 0.002) moments for the pain flare as compared to the no flare group. In addition, for the pain flare as compared to controls, greater decreases in the knee flexion (p = 0.03) and internal rotation (p = 0.005) moments were found.ConclusionsIndividuals who adapt their gait to reduce knee joint loads may be less susceptible to exercise-induced pain flares. This highlights a potential role of gait biomechanics in short-term osteoarthritis pain fluctuations. The results also suggest that despite the chronic nature of osteoarthritis pain, the motor system’s ability to respond to nociceptive stimuli remains intact.

Establishment of an Automated Algorithm Utilizing Optical Coherence Tomography and Micro-Computed Tomography Imaging to Reconstruct the 3-D Deformed Stent Geometry.

Percutaneous coronary intervention (PCI) is the prevalent treatment for coronary artery disease, with hundreds of thousands of stents implanted annually. Computational studies have demonstrated the role of biomechanics in the failure of vascular stents, but clinical studies is this area are limited by a lack of understanding of the deployed stent geometry, which is required to accurately model and predict the stent-induced in vivo biomechanical environment. Herein, we present an automated method to reconstruct the 3-D deployed stent configuration through the fusion of optical coherence tomography (OCT) and micro-computed tomography ( μ CT) imaging data. In an experimental setup, OCT and μ CT data were collected in stents deployed in arterial phantoms ( n=4 ). A constrained iterative deformation process directed by diffeomorphic metric mapping was developed to deform μ CT data of a stent wireframe to the OCT-derived sparse point cloud of the deployed stent. Reconstructions of the deployed stents showed excellent agreement with the ground-truth configurations, with the distance between corresponding points on the reconstructed and ground-truth configurations of [Formula: see text]. Finally, reconstructions required <30 min of computational time. In conclusion, the developed and validated reconstruction algorithm provides a complete spatially resolved reconstruction of a deployed vascular stent from commercially available imaging modalities and has the potential, with further development, to provide more accurate computational models to evaluate the in vivo post-stent mechanical environment, as well as clinical visualization of the 3-D stent geometry immediately following PCI.

Plantar pressures in identical and non-identical twins

Identifying environmental risk factors for musculoskeletal disorders is challenging due to the number of potential confounders. Twins are of particular interest for researchers interested in studying these types of problems due to their inherent control for the influence of genetic factors. In twin studies, this population can allow environmental risk factors to be more easily identified, and this type of study design may allow the role of biomechanics in injury and disease to be further explored. At present, it is unclear if foot function displays more similarity between certain types of twins. In this study, we hypothesized that the plantar pressures of monozygotic (identical) twins would be more similar between pairs than dizygotic (non-identical) twins. We measured static and dynamic plantar pressures from five pairs of each twin type. Statistical parametric modeling was used to compare pressure distributions at the sensor level. For >80% of stance phase, the pixel level analysis indicated that monozygotic twins had less variation in plantar pressure between pairs. The average z-statistic across the entire trial was 0.88 for the monozygotic group and 1.13 for the dizygotic group. In this study we provide evidence of greater similarity of plantar pressures in monozygotic twin pairs compared to dizygotic twins. This finding supports the use of co-twin studies investigating potentially modifiable environmental and biomechanical risk factors for musculoskeletal conditions that affect the foot and ankle.

HBO1 directs histone H4 specific acetylation, potentiating mechano-transduction pathways and membrane elasticity in ovarian cancer cells

New approaches to treat ovarian cancer, the fifth leading cause of cancer mortality among women, are being sought, with the targeting of epigenetic modulators now receiving much attention. The histone acetyltransferase HBO1 functions in regulating diverse molecular processes, including DNA repair, transcription and replication, and is highly expressed in primary ovarian cancer. Here we define both the molecular function and a role in cell biomechanics for HBO1 in ovarian cancer. HBO1 preferentially acetylates histone H4 through the concomitant overexpression of co-regulator JADE2, and is required for the expression of YAP1, an ovarian cancer oncogene and mechano-transductor signaling factor. HBO1 appears therefore to have a role in determining the mechano-phenotype in ovarian cancer cells, through both signal transduction processes, and the modulation of cell elasticity as observed using direct measurements on live cells via atomic force microscopy.

Differential biomechanical properties of mouse distal colon and rectum innervated by the splanchnic and pelvic afferents.

Visceral pain is one of the principal complaints of patients with irritable bowel syndrome, and this pain is reliably evoked by mechanical distension and stretch of distal colon and rectum (colorectum). This study focuses on the biomechanics of the colorectum that could play critical roles in mechanical neural encoding. We harvested the distal 30 mm of the colorectum from mice, divided evenly into three 10-mm-long segments (colonic, intermediate and rectal), and conducted biaxial mechanical stretch tests and opening-angle measurements for each tissue segment. In addition, we determined the collagen fiber orientations and contents across the thickness of the colorectal wall by nonlinear imaging via second harmonic generation (SHG). Our results reveal a progressive increase in tissue compliance and prestress from colonic to rectal segments, which supports prior electrophysiological findings of distinct mechanical neural encodings by afferents in the lumbar splanchnic nerves (LSN) and pelvic nerves (PN) that dominate colonic and rectal innervations, respectively. The colorectum is significantly more viscoelastic in the circumferential direction than in the axial direction. In addition, our SHG results reveal a rich collagen network in the submucosa and orients approximately ±30° to the axial direction, consistent with the biaxial test results presenting almost twice the stiffness in axial direction versus the circumferential direction. Results from current biomechanical study strongly indicate the prominent roles of local tissue biomechanics in determining the differential mechanical neural encoding functions in different regions of the colorectum. NEW & NOTEWORTHY Mechanical distension and stretch-not heat, cutting, or pinching-reliably evoke pain from distal colon and rectum. We report different local mechanics along the longitudinal length of the colorectum, which is consistent with the existing literature on distinct mechanotransduction of afferents innervating proximal and distal regions of the colorectum. This study draws attention to local mechanics as a potential determinant factor for mechanical neural encoding of the colorectum, which is crucial in visceral nociception.

ESTUDO DESCRITIVO E MORFOMÉTRICO DO CRÂNIO DO Ramphastos toco (AVES: PICIFORMES)

Resumo O estudo de caracteres morfológicos e suas funções biomecânicas na estrutura craniana das aves levanta debates de cunho filogenético, taxonômico e morfofuncional. O objetivo deste trabalho foi descrever e analisar caracteres morfológicos e morfométricos do esqueleto do Ramphastos toco e confrontá-los com a bibliografia disponível. Foram analisados 13 crânios de indivíduos adultos e de um espécime dissecado fixado em formol (4%). As carcaças foram submetidas à técnica de maceração para o preparo dos esqueletos, com a retirada dos tecidos moles, desengorduramento e clareamento em água oxigenada (50%) e hipoclorito de sódio (50%). O formato e amplitude da sutura naso-frontal e zona flexora craniofacial, a presença dos sesamóides intracapsulares rostral e caudal na articulação quadrática e a presença do ligamento pós-orbital foram fatores que desafiaram a bibliografia existente e os modelos de transferência de força propostos durante estudos da cinética craniana da espécie. A discussão que emerge é a possibilidade dessas características limitadoras da cinética craniana descritas nos espécimes possuírem, em conjunto, a função de promover estabilidade funcional para uma estrutura cuja natureza dimensional, em si, gera instabilidade. Os resultados morfométricos também apresentaram divergências significativas quando comparados à bibliografia disponível, o que pode estar relacionado a variáveis como especiação alopátrica, hibridização e amostragem.

Patella Height in Different Ethnic Populations: An Observational Multicenter Study.

Patella height appears to have a crucial role in knee biomechanics. Patellar malalignment and maltracking are therefore believed to be associated with development and progression of patellofemoral pain and disease. Published data are scant regarding the effect of everyday tasks on patella height and patellofemoral disease. We included 150 subjects in a retrospective observational study. Group A had 75 subjects (24 male and 51 female, with a mean age of 58.5 yr), whose daily activities included squatting (the traditional Muslim praying position called Sujud). Group B had 75 subjects (42 male and 33 female, with a mean age of 47.6 yr), who were non-Muslim. Patella height was measured using Insall-Salvati (IS) and Blackburne-Peel (BP) ratios. The mean IS ratio was 0.86 (confidence interval [CI]: 0.7-1.02) for group A and 1.1 (CI: 0.96-1.23) for group B. The mean BP ratio was 0.66 (CI: 0.49-0.83) for group A and 0.89 (CI: 0.73-1.04) for group B. We found 26 subjects (34.7%) in group B to have patella alta, when measured by either ratio, compared to one subject (1.3%) in group A (p < 0.01) with patella alta. We found 61 subjects (81.3%) in group A to have patella baja, when measured by either ratio, compared to 21 subjects (28%) in group A (p < 0.01) with patella baja. In group A, the IS ratio was reduced in 29 subjects (38.7%), the BP ratio was reduced in 59 subjects (78.7%), and both were reduced in 27 subjects (36%). A similar pattern was noted for group B. Our results show that a significant increase in patella baja was associated with repeated squatting/kneeling, compared to the predominance of patella alta in the control group. On the basis of these findings, we hypothesize that biomechanical stresses associated with repeated hyperflexion of the knee asymmetrically affect the more flexible quadriceps muscle fibers greater than patella tendon fibers. Thus, repeated hyperflexion in everyday tasks leads to elongation of quadriceps fibers and patella baja.

The roles of joint tissues and jaw muscles in palatal biomechanics of the savannah monitor (Varanus exanthematicus) and their significance for cranial kinesis.

Numerous vertebrates exhibit cranial kinesis, or movement between bones of the skull and mandible other than at the jaw joint. Many kinetic species possess a particular suite of features to accomplish this movement, including flexible cranial joints and protractor musculature. Whereas the musculoskeletal anatomy of these kinetic systems is well understood, how these joints are biomechanically loaded, how different soft tissues affect joint loading and kinetic capacity, and how the protractor musculature loads the skull remain poorly understood. Here, we present a finite element model of the savannah monitor, Varanus exanthematicus, a modestly kinetic lizard, to better elucidate the roles of soft tissue in mobile joints and protractor musculature in cranial loading. We describe the 3D resultants of jaw muscles and the histology of palatobasal, otic and jaw joints. We tested the effects of joint tissue type, bite point and muscle load to evaluate the biomechanical role of muscles on the palate and braincase. We found that the jaw muscles have significant mediolateral components that can impart stability across palatocranial joints. Articular tissues affect the magnitude of strains experienced around the palatobasal and otic joints. Without protractor muscle loading, the palate, quadrate and braincase experience higher strains, suggesting this muscle helps insulate the braincase and palatoquadrate from high loads. We found that the cross-sectional properties of the bones of V. exanthematicus are well suited for performing under torsional loads. These findings suggest that torsional loading regimes may have played a more important role in the evolution of cranial kinesis in lepidosaurs than previously appreciated.

Biomechanical contributions of upper cervical ligamentous structures in Type II odontoid fractures

Fractures of the odontoid present frequently in spinal trauma, and Type II odontoid fractures, occurring at the junction of the odontoid process and C2 vertebrae, represent the bulk of all traumatic odontoid fractures. It is currently unclear what soft-tissue stabilizers contribute to upper cervical motion in the setting of a Type II odontoid fracture, and evaluation of how concomitant injury contributes to cervical stability may inform surgical decision-making as well as allow for the creation of future, accurate, biomechanical models of the upper cervical spine. The objective of the current study was to determine the contribution of soft-tissue stabilizers in the upper cervical spine following a Type II odontoid fracture. Eight cadaveric C0-C2 specimens were evaluated using a robotic testing system with motion tracking. The unilateral facet capsule (UFC) and anterior longitudinal ligament (ALL) were serially resected to determine their biomechanical role following odontoid fracture. Range of motion (ROM) and moment at the end of intact specimen replay were the primary outcomes. We determined that fracture of the odontoid significantly increases motion and decreases resistance to intact motion for flexion–extension (FE), axial rotation (AR), and lateral bending (LB). Injury to the UFC increased AR by 3.2° and FE by 3.2°. ALL resection did not significantly increase ROM or decrease end-point moment. The UFC was determined to contribute to 19% of intact flexion resistance and 24% of intact AR resistance. Overall, we determined that Type II fracture of the odontoid is a significant biomechanical destabilizer and that concurrent injury to the UFC further increases upper cervical ROM and decreases resistance to motion in a cadaveric model of traumatic Type II odontoid fractures.

Development of postural control during single-leg standing in children aged 3–10 years

BackgroundThe ability to control the center of mass (COM) during single-leg standing (SLS) is imperative for individuals to walk independently. However, detailed biomechanical features of postural control during SLS performed by children remain to be comprehensively investigated. Research question: We aimed to investigate the development of postural control during SLS in children aged 3–10 years. MethodsForty-eight healthy children (26 boys and 22 girls) aged 3–10 years and 11 young adults participated in this experiment. The child population was divided into four groups by age: 3–4, 5–6, 7–8, and 9–10 years. The SLS task included standing on a single leg as long and as steady as possible for up to 30 s. A three-dimensional motion capture system and two force plates were used for calculating the COM and center of pressure (COP). The task was divided into three phases (accelerated, decelerated, and steady) on the basis of the relationship between COM and COP. ResultsCOP–COM distances in the 5–6 years’ and 7–8 years’ groups were significantly increased during the acceleration phase when compared with those in the adult group. Furthermore, COP–COM distances during the decelerated phase were significantly higher in all children’s groups compared with those in the adult group. Lastly, COP–COM distance during the steady phase was significantly higher in the 3–4 year age group than in the 9–10 year age and adults groups. SignificanceThese results suggest that postural control during the acceleration and steady phases mature by 9 years. Conversely, children ∼10 years did not attain adult-like levels of postural control during the decelerated phase. The developmental process for postural control at each phase possibly plays a significant role in the basic biomechanics of movement and does not display a monotonic pattern.

Lower-limb muscle function during sidestep cutting

To investigate lower-limb muscle function during sidestep cutting, prior studies have analysed electromyography (EMG) data together with three dimensional motion analysis. Such an approach does not directly quantify the biomechanical role of individual lower-limb muscles during a sidestep cut. This study recorded three dimensional motion analysis, ground reaction force (GRF) and EMG data for eight healthy males executing an unanticipated sidestep cut. Using a musculoskeletal modelling approach, muscle function was determined by computing the muscle contributions to the GRFs and lower-limb joint moments. We found that bodyweight support (vertical GRF) was primarily provided by the vasti, gluteus maximus, soleus and gastrocnemius. These same muscles, along with the hamstrings, were also primarily responsible for modulating braking and propulsion (anteroposterior GRF). The vasti, gluteus maximus and gluteus medius were the key muscles for accelerating the centre-of-mass towards the desired cutting direction by generating a medially-directed GRF. Our findings have implications for designing retraining programs to improve sidestep cutting technique.

Outside-In Single–Lasso Loop Technique for Meniscal Repair: Fast, Economic, and Reproducible

The current understanding of the biomechanical role of the meniscus, in conjunction with the increasing efforts to achieve its preservation within the orthopaedic community during treatment of meniscal lesions, has prompted the development of different meniscal repair techniques. The outside-in technique is recommended for anterior horn and middle-segment meniscal tears and has been recognized as a low-cost procedure with a low incidence of complications. Diverse modifications of this technique have been published over the past decade. On the basis of these previous outside-in technique modifications and aiming to simplify and reduce the number of surgical steps, as well as simplify suture and/or instrument manipulation, during this technique, we describe the single–lasso loop outside-in technique for meniscal repair. We believe this modified technique represents a simplified, economic, and highly reproducible procedure option whenever an outside-in technique for meniscal repair is considered.

How the height and the area of the annulus fibrosus affect the range of motion behavior: A stochastic analysis

The annulus fibrosus has substantial variations in its geometrical properties (among individuals and between levels), and plays an important role in the biomechanics of the spine. Few works have studied the influence of the geometrical properties including annulus area, anterior / posterior disc height, and over the range of motion, but in general these properties have not been reported in the finite element models. This paper presents a probabilistic finite element analyses (Abaqus 6.14.2) intended to assess the effects of the average disc height ( hp) and the area ( A) of the annulus fibrosus on the biomechanics of the lumbar spine. The annulus model was loaded under flexion, extension, lateral bending, and axial rotation and analyzed for different combinations of hpand A in order to obtain their effects over the range of motion. A set of 50 combinations of hp(mean = 18.1 mm, SD = 3.5 mm) and A (mean = 49.8%, SD = 4.6%) were determined randomly according to a normal distribution. A Yeoh energy function was used for the matrix and an exponential function for the fibers. The range of motion was more sensitive to hpthan to A. With regard to the range of motion the segment was more sensitive in the following order: flexion, axial rotation, extension, and lateral bending. An increase of the hpproduces an increase of the range of motion, but this decreases when A increases. Comparing the range of motion with the experimental data, on average, 56.0% and 73.0% of the total of data were within the experimental range for the L4–L5 and L5–S1 segments, respectively. Further, an analytic equation was derived to obtain the range of motion as a function of the hpand A. This equation can be used to calibrate a finite element model of the spine segment, and also to understand the influence of each geometrical parameter on the range of motion.

Tissue biomechanics during cranial neural tube closure measured by Brillouin microscopy and optical coherence tomography.

Embryonic development involves the interplay of driving forces that shape the tissue and the mechanical resistance that the tissue offers in response. While increasing evidence has suggested the crucial role of physical mechanisms underlying embryo development, tissue biomechanics is not well understood because of the lack of techniques that can quantify the stiffness of tissue in situ with 3D high-resolution and in a noncontact manner. We used two all-optical techniques, optical coherence tomography (OCT) and Brillouin microscopy, to map the longitudinal modulus of the tissue from mouse embryos in situ. We acquired 2D mechanical maps of the neural tube region of embryos at embryonic day (E) 8.5 (n = 2) and E9.5 (n = 2) with submicron spatial resolution. We found the modulus of tissue varied distinctly within the neural tube region of the same embryo and between embryos at different development stages, suggesting our technique has enough sensitivity and spatial resolution to monitor the tissue mechanics during embryonic development in a noncontact and noninvasive manner. We demonstrated the capability of OCT-guided Brillouin microscopy to quantify tissue longitudinal modulus of mouse embryos in situ, and observed distinct change in the modulus during the closure of cranial neural tube. Although this preliminary work cannot provide definitive conclusions on biomechanics of neural tube closure yet as a result of the limited number of samples, it provides an approach of quantifying the tissue mechanics during embryo development in situ, thus could be helpful in investigating the role of tissue biomechanics in the regulation of embryonic development. Our next study involving more embryo samples will investigate systematic changes in tissue mechanics during embryonic development.

Can the Anterolateral Ligament Be Reliably Identified in Anterior Cruciate Ligament-Intact and Anterior Cruciate Ligament-Injured Knees on 3-T Magnetic Resonance Imaging?

Background:The anterolateral ligament (ALL) has been described as an extracapsular stabilizer of knee rotational stability. Investigators have shown a renewed interest in the ALL and further evaluated its anatomy and biomechanical role as a knee stabilizer. The appearance of the ALL on magnetic resonance imaging (MRI) remains inconsistent across the literature.Purpose:The aims of this study were 2-fold. The first objective was to further investigate the appearance of the uninjured ALL on MRI and provide data regarding interrater agreement in identifying the ligament. The second objective was to describe the incidence of concomitant ALL injuries in anterior cruciate ligament (ACL)–injured knees and provide data regarding interrater agreement in identifying and grading these injuries.Study Design:Cohort study (diagnosis); Level of evidence, 3.Methods:Fifty consecutive MRI scans of non–ACL-injured knees (control) and 50 consecutive MRI scans of ACL-injured knees performed at a single sports medicine center were identified. Three musculoskeletal radiologists independently reviewed the MRI scans in a randomized and blinded fashion. In the control group, the reviewers classified the ALL as visualized or not and did so for the proximal, middle, and distal thirds of the ligament. In the ACL tear group, the reviewers classified the ALL as visualized or not for each third of the ligament. They noted whether the ligament was injured and graded the injury as low, intermediate, or high.Results:All 3 segments of the ALL were visualized in a mean 11% of patients. The ALL was partially visualized in a mean 68% of patients. The distal third of the ALL was injured 28% (14/50) of the time in the ACL tear group. The agreement rate among raters for classifying the injury status was fair to poor.Conclusion:Visualization of the ALL was inconsistent in the current study. Identifying and grading an injury to the ALL were difficult and had poor interobserver agreement. Using MRI to aid in the diagnosis of an ALL injury in the setting of an ACL tear is unreliable according to our study results. Further research looking at consistent ALL identification and injury patterns should be undertaken.

Infrapatellar Fat Pad-Derived Stem Cell-Based Regenerative Strategies in Orthopedic Surgery.

Infrapatellar fat pad is a densely vascularized and innervated extrasynovial tissue that fills the anterior knee compartment. It plays a role in knee biomechanics as well as constitutes a source of stem cells for regeneration after knee injury. Infrapatellar fat pad-derived stem cells (IPFP-ASCs) possess enhanced and age-independent differentiation capacity as compared to other stem cells, which makes them a very promising candidate in stem cell-based regenerative therapy. The aims of this review are to outline the latest advances and potential trends in using IPFP-ASCs and to emphasize the advantages over other sources of stem cells for applications in orthopedic surgery.

Skin stiffness in ray-finned fishes: Contrasting material properties between species and body regions.

The skin of aquatic vertebrates surrounds all the mechanical lineages of the body and must, therefore, play an important role in locomotion. A cross-woven collagenous dermal design has converged across several clades of vertebrates. Despite this intriguing pattern, the biomechanical role of skin in swimming fishes remains largely unknown. A direct force transmission role for fish skin has been proposed, a hypothesis that is supported by the arrangement of the connective tissues linking the skin to the axial musculature. To evaluate this direct force-transmission hypothesis, we undertook hundreds of uniaxial tensile tests on skin samples from coho salmon (Oncorhynchus kisutch), Florida pompano (Trachinotus carolinus), and red snapper (Lutjanus campechanus). To do this, we developed highly precise, low-cost, custom-built material testing units. To augment our data, we also assembled a data set of skin stiffness of four additional species of actinopterygians fishes from previously published studies. We found that stiffness varies significantly between species and that the skin of our study species was increasingly stiff along a rostrocaudal gradient. Placing our results in the context of the limited body of previous work, we found that species with lower skin stiffness exhibit shorter propulsive wavelengths and low thrust production at the caudal fin and species with higher skin stiffness possess longer propulsive wavelengths and high thrust production at the caudal fin. In addition, we found that mean collagen fiber angle was close to 50° and that fiber angle was lower in posterior samples than in anterior and midlateral samples. Taken as a whole, our mechanical and morphological results support the hypothesis that the skin functions as an important direct force-transmission device in actinopterygians whereby muscular force generated in anterior myotomes is transmitted to the posterior of the body through the increasingly stiff skin.

The Impact of Choroidal Swelling on Optic Nerve Head Deformation.

Choroid geometry and swelling have been proposed to contribute to ocular pathologies. Thus, it is important to understand how the choroid may impact the optic nerve head (ONH) biomechanical environment. We developed a finite element model to study how acute choroidal swelling and choroid geometry affect ONH deformation. We developed two geometric models of the ONH: one with a "blunt" choroidal insertion and another with a "tapered" choroid insertion. We examined how choroidal volume changes (2.1-14.2 μL, estimated to occur during the ocular pulse) impact biomechanical strain in three tissue regions: the prelaminar neural tissue, lamina cribrosa, and retrolaminar neural tissue. Then, we performed a sensitivity analysis to understand how variation in ONH pressures, tissue material properties, and choroidal swelling influenced the peak tissue strains. Choroidal swelling in the blunt choroid geometry had a large impact on the strains in the prelaminar neural tissue, with magnitudes comparable to those expected to occur due to an IOP of 30 mm Hg. Choroidal swelling in the tapered choroid geometry also affected strains but to a lesser extent compared to the blunt geometry. A sensitivity analysis confirmed that choroidal swelling was more influential on prelaminar neural tissue strains in the blunt choroid geometry. Choroid anatomy and swelling can interact to play an important role in prelaminar neural tissue deformation. These findings suggest that the choroid may play an important, and previously unappreciated, role in ONH biomechanics, and motivate additional research to better define the in vivo effects of choroidal volume change.

Analysis of modularity and integration suggests evolution of dragonfly wing venation mainly in response to functional demands.

Insect wings show a high variability in wing venation. Selection for function, developmental pathways and phylogeny likely influenced wing vein diversification, however, quantitative data to estimate these influences and their interplay are missing. Here, it is tested how dragonfly wing vein configuration is influenced by functional demands, development, phylogeny and allometry using the concepts of modularity and integration. In an evolutionary context, modules are sets of characters that evolve in relative independence to other characters, while integration refers to a high degree of association between subparts of a structure. Results show allometric and phylogenetic signal in the wing shape variation, however, patterns of integration and modularity are not influenced by these two factors. Overall, dragonfly wings are highly integrated structures with almost no modular signal. Configuration changes in one wing vein or wing area thus influence wing shape as a whole. Moreover, the fore- and hindwings correlate with each other in their evolutionary shape variation supporting biomechanical data of wing interdependence. Despite the overall high degree of evolutionary integration, functional hypotheses of modularity could be confirmed for two wing areas, the arculus–triangle complex at the base of the wing which is responsible for passive wing folding especially during flapping flight and the location of the pterostigma, a coloured wing cell which is more heavy that other wing cells and passively regulates wing pitch as well as critical flight speeds during gliding. Although evolving as distinct modules, these specific vein regions also show high integration and evolve at the same rates like the whole wing which suggests an influence of these structures on the shape evolution of the rest of the wing. Their biomechanical role as passive regulators of wing corrugation and wing pitch suggests that these structures decisively influenced the evolution of advanced modern flight styles and explains their retention once they had evolved early within the lineage Odonatoptera.