Environmental Health Risk Assessment Research Articles

Environmental health risk assessment and acute effects of sulfur dioxide (SO2) inhalation exposure on traditional sulfur miners at Ijen Crater Volcano, Indonesia

The Ijen Crater volcano is one of the geological wonders recognized by UNESCO. Inside it is a blue lake with a high acidity level, and a blue fire phenomenon has formed due to the very high concentration of sulfur. This crater is also one of Indonesia's largest sources of sulfur and is used by locals as a traditional sulfur mine. This study aims to measure SO2 concentrations and assess the health risks of SO2 exposure in traditional sulfur mine workers. The SO2 measurements were taken using impingers at six sample points along the mine workers' path. In addition, anthropometric data, work activity patterns, and health complaints during work were collected through direct interviews with 30 respondents selected based on inclusion criteria. Short-Term Health Impact Method was carried out based on a comparison of threshold level values and acute effects obtained from interviews regarding health complaints. The Hazard Question Index (HQ Index) of SO2 exposure was calculated using the health risk assessment method. The SO2 concentrations between 3.14 and 18.24 mg/m3. All sample points were above the quality standard threshold set by the EPA of 1.97 mg/m3. The most common health complaints workers experienced were eye irritation and coughing while working, followed by headache, shortness of breath, and skin irritation. The HQ index of SO2 exposure in workers was 1.02 for real-time exposure and 2.15 for long-term exposure. An HQ index ≥ 1 indicates a potential health risk for workers. Therefore, it is important to control workers' SO2 exposure.

Soil benzene emissions and inhalation health risks affected by various land covers

Accurate quantification of soil volatile organic compounds (VOCs) flux is crucial for assessing inhalation environmental health risks and developing region-specific remediation strategies. However, land cover significantly influences VOCs emissions from soil. This study investigated benzene, a representative VOCs, using a laboratory flux chamber and numerical simulations to evaluate its release patterns under different surface covers, including bare soil (no cover), clay brick, cement, and grass. In the experiment, gaseous benzene was collected using an adsorption tube filled with Tenax-TA adsorbent. The collected samples were subsequently analyzed using thermal desorption coupled with gas chromatography-mass spectrometry. By integrating these findings with environmental health risk assessment methodologies, we developed a tailored approach for assessing inhalation health risks at benzene-contaminated sites with varying land covers. Additionally, we conducted application studies of this method across various scenarios. The results indicate that soil benzene emissions could be reduced by using low-permeability coverings such as clay brick and cement, as well as by planting vegetation. The average fluxes of benzene through covering materials were of the order of 1.22 × 10−2, 4.37 × 10−3, 2.47 × 10−3, and 9.88 × 10−4 mg m−2·s−1 for bare soil, clay brick, grass, and cement, respectively. The application of clay brick and cement coverings on the soil surface results in more pollutants remaining in the soil in liquid and adsorbed states, making them less likely to volatilize. The inhalation carcinogenic risk (CR) values for soil benzene at an abandoned oil refinery site in Northwestern China under bare soil, brick, and cement cover are 1.3 × 10−6, 1.22 × 10−6, and 9.73 × 10−7, respectively. Low-permeability covers such as clay brick and cement reduces the inhalation CR of gaseous benzene from the surface soil, and delays the growth trend of cumulative inhalation CR.

Multidimensional Approach for the Assessment of Environmental Pollution and Health Risk Associated With V, Ni, Cr, Cu, and Zn in the Recent Sediments of Kabini Interstate River, Southeastern Western Ghats, India

ABSTRACTThe present work intends to study the variation of heavy metals (HMs) to scrutinize the scenario of pollution index and associated environmental risk, as well as source weathering conditions along the Kabini River. The decreasing order of concentration of HMs along the basin is Cr > V > Ni > Zn > Cu. The paper spotlights the pollution grade in sediments, assessed by the geo‐accumulation index (Igeo), contamination factor (Cf), pollution load index (PLI), and enrichment factor (Ef). The assessment of ecological risk is studied as potential ecological risk index (RI), toxic risk index (TRI), and modified hazard quotients (mHQs). As per the Igeo and Cf, V and Cr concentrations are higher in the region. Further, PLI confirmed that 35% of samples exceeded the limits of sediment quality guidelines. The RI and TRI values show that a higher ecological risk is associated with Ni, V, and Cr and with Cu and Cr, respectively. Additionally, the 23% Ni and 20% Cu samples from mHQ indicate the severity of pollution in the aquatic environment. The inputs from anthropogenic and natural sources change the concentration of these HMs along the region. Moreover, the study of CIA and plagioclase index of alteration plots confirmed the low to intense weathering conditions. The statistical approach shows the linkage between Cr–V, Cu–Zn, and principal component analysis–derived prominent sources: industrial and agricultural runoff, as well as higher silicate weathering, contribute to the HMs concentration in the region. The Kabini River passes through different climatic and land‐use domains of Kerala and Karnataka, which eventually regulate the HM concentration and geo‐environmental processes in the region and affect the health risk to humans in one or the other way. The reference data generated from the present work are absolutely new and would be significant in the future for deriving sustainable development plans for the well‐being of human beings and precious natural resources.

The Emission Characteristics of VOCs and Environmental Health Risk Assessment in the Plywood Manufacturing Industry: A Case Study in Shandong Province

The current emission characteristics of volatile organic compounds (VOCs) in the plywood manufacturing industry are not yet clearly understood, and their impact on occupational health warrants attention. This study examines VOC concentrations in adhesive-coating and hot-pressing workshops, aiming to discern the emission characteristics and evaluate the health risks to workers. The calculated VOC emission factors range from 1.5 to 3.6 g/m3 for plywood, and an average total VOC concentration of 954.17 μg/m3 is observed. Hot pressing (336.63 μg/m3) and adhesive coating (276.24 μg/m3) substantially contribute to organized and unorganized emissions, respectively. Oxygenated VOCs (OVOCs) (50.79%) predominate, followed by alkanes (16.22%) and halohydrocarbons (15.81%). Formaldehyde, acetone, and acetaldehyde are most prevalent in organized emissions, while dichloromethane, formaldehyde, and methyl methacrylate are dominant in unorganized emissions. Ozone formation potential (OFP) values range from 905.04 to 1822.35 μg/m3, with notable contributions from formaldehyde, methyl methacrylate, and acetaldehyde. Health risk assessments using the total lifetime cancer risk (T-LCR) values suggest potential cancer risks for identified VOCs, particularly formaldehyde in the hot-pressing process. These findings will contribute valuable insights for regional-scale VOC pollution control and offer guidance for minimizing environmental impact and improving occupational health and safety within the plywood manufacturing industry.

Microplastic environmental behavior and health risk assessment: a review

Microplastic environmental behavior and health risk assessment: a review

Environmental health risk assessment in Chile: Strengths and limitations

Environmental health risk assessment in Chile: Strengths and limitations

Occurrence of pharmaceutical residues in drinking water: a systematic review.

The aim of the present paper was to give a complete picture on the drinking water contamination by pharmaceutical residues all over the world. For this purpose, a systematic review was carried out for identifying all available research reporting original data resulting by sampling campaign and analysis of "real" drinking water samples to detect pharmaceutical residues. The investigated databases were PubMed, Scopus, and Web of Science. A total of 124 studies were included; among these, 33 did not find target analytes (all below the limit of detection), while the remaining 91 studies reported the presence for one or more compounds, in concentrations ranging from a few units to a few tens of nanograms. The majority of the studies were performed in Europe and the most represented categories were nonsteroidal anti-inflammatory drugs and analgesics. The most common analytical approach used is the preparation and analysis of the samples by solid-phase extraction and chromatography coupled to mass spectrometry. The main implications resulting from our review are the need for (a) further studies aimed to allow more accurate environmental, wildlife, and human health risk assessments and (b) developing integrated policies promoting less environmentally persistent drugs, the reduction of pharmaceuticals in livestock breeding, and the update of wastewater and drinking water treatment plants for a better removal of drugs and their metabolites.

Exploring the potential of hydrophobic deep eutectic solvent functionalized magnetic nanoparticles as sorbent in micro-extraction towards emerging pollutants in various matrices

Emerging pollutants pose an increasing threat to environmental quality and human health, necessitating significant advancements in analytical methodologies. Hydrophobic deep eutectic solvent (HDES) functionalized magnetic nanoparticles (MNP) or MHDES represent a promising advancement in the field of micro-extraction for pollutant detection across diverse matrices. This review explores the synthesis, characterization, and application of MHDES as sorbents for the efficient extraction and preconcentration of emerging pollutants, including pharmaceuticals, pesticides, plasticizers, and heavy metals. The functionalization of MNP with HDES addresses the challenges of agglomeration and stability, enhancing their performance in non-polar compound extraction. Additionally, the application of the AGREEprep greenness metric tool highlights the environmental benefits of this method, emphasizing reduced solvent usage, lower energy consumption, and minimal waste production. This novel approach not only improves the efficacy and selectivity of pollutant detection but also broadens the applicability of MHDES in environmental monitoring and health risk assessment, offering a greener and more sustainable solution for analytical chemistry.

Environmental and human health risk assessment of soils in areas of ore mineralization and past gold-mining activity.

The patterns of the potentially toxic elements (PTEs: Cr, Fe, Ni, Cu, Zn, As, Mo, Pb, Hg) distribution in soils were studied together with the health risk assessment in the area of ore mineralization, past gold activity, and tailing effects of the Sarala gold-ore group located in the Republic of Khakassia, Russia. High PTE concentrations were found in soils with the presence of potential negative impact on human health based on the following: local background investigation, according to statistics; geochemical, environmental, and human health risk calculations; and comparative analysis using international and local reference, such as continental crust, clarke, and permissible concentrations. Sources of PTE soil enrichment and pollution were statistically identified in ascending order of degree: geogenic (local background) < geogenic-technogenic (sites with geological exploration traces - trenches) < technogenic (waste tailings). The main pollutants are Hg and As which showed moderate to significant ecological risk. Negative impact of Cr on soils was found. The pollution degree and toxicity (moderate to significant) of other PTEs increase in the location of ore mineralization zone with exploration trenches and waste tailings. Arsenic poses a carcinogenic risk to adults and children upon contact with polluted soils and non-carcinogenic effect on children in areas affected by tailings and ore mineralization zone. The non-carcinogenic effect of Fe on children was found in soils of all sites. The results provide useful information regarding the studied PTEs and their impact on the environment and human health. Such information can be helpful for the state-level decision-making process when addressing solutions for contaminated areas.

Environmental Health Risk of Microplastics Due to Consumption of Fish and Shellfish in the Coastal Area.

The increasing accumulation of plastic waste is the most serious threat to the marine ecosystem. People who still have the habit of disposing of solid waste, especially plastic-type waste, in the marine environment have led to the discovery of microplastic content in various marine biota such as fish and shellfish. We aimed to assess the environmental health risks of microplastics due to consumption of marine life in the coastal area. We used an observational method with the Environmental Health Risk Assessment (EHRA) design to analyze the health risks of humans consuming fish and shellfish containing microplastics. This research was conducted in the coastal area of Takalar Regency, Indonesia in 2022. The samples used consisted of human (n = 30) and marine biota (fish, n=20; shellfish, n=20) samples. The data were obtained from observations, physical measurements of biota, laboratory tests, polymer type identification by Fourier Transform Infrared (FTIR) spectroscopy, and microscopy. The average concentration of microplastics containing styrene compounds in shellfish was 2.01 mg/kg. The abundance of MPs in the fish and shellfish samples was 0.01 particles/g or 10 particles/kg in fish and 7 particles/individual in shellfish. The MPs were found in line, fragment, film, and pellet forms, with different size and color variations. The average MPs exposure risk level (RQ value) for both fish and shellfish was 0.02. All samples had RQ values < 1, which means that the microplastic-containing tofu shellfish were still safe for consumption by people living in the Takalar coastal area.

Temporal metabolic dynamics and heterogeneity of viable but nonculturable Pseudomonas aeruginosa induced by chlorine disinfection at single-cell resolution

Characterizing the metabolic network and dynamics of Viable But Nonculturable (VBNC) bacteria is crucial for their identification and control. In this study, single-cell Raman spectroscopy was used to explore the metabolic intricacies of VBNC P. aeruginosa induced by chlorine disinfection over 24 h. VBNC P. aeruginosa exhibited significant reductions of 75.98 %, 84.26 % and 81.07 % in carbohydrate, protein and nucleic acid Raman peaks, signaling decreased metabolic activity in these crucial components. Intriguingly, lipid metabolism in VBNC P. aeruginosa remained robust, indicating a potential adaptation to environmental stress. Furthermore, this study analyzed Raman characteristic peaks to examine metabolic conversion in these bacteria. VBNC P. aeruginosa displayed distinct phase-specific metabolic conversion patterns compared to culturable ones. These findings shed light on the temporal dynamics of metabolic processes, such as lipid-carbohydrate conversion, which appeared to be ongoing throughout the incubation period in VBNC P. aeruginosa. Compared to the culturable state, VBNC P. aeruginosa exhibited reduced isotopic assimilation rates for carbon, nitrogen and hydrogen by 40.57 %, 44.62 % and 39.45 %, indicating decreased substrate uptake for biomolecular synthesis. Additionally, the metabolic heterogeneity index of the VBNC bacterial population increased by 37.28 %, with this heterogeneity displaying a progressive increase with the duration of the culture. This observation suggests VBNC P. aeruginosa differentiation into distinct subpopulations, believed crucial for survival in challenging environments. These findings reveal the metabolic dynamics of VBNC state bacteria, providing insights into their adaptive strategies and implications for environmental health risk assessment and precise control technologies.

Validation of an FT-IR microscopy method for the monitorization of microplastics in water for human consumption in Portugal: Lisbon case study.

The growing anthropogenic contamination of natural water by microplastics (MPs) confirms the urgent need to preserve this precious resource. MPs are part of the group of contaminants of emerging concern, and the occurrence studies in surface water and water for human consumption (WHC) are mandatory for environmental and human health risk assessment. This study aims to optimize and validate a Fourier transform infrared spectroscopy method coupled with optical microscopy (micro-FTIR) in transmission mode to monitor MPs in WHC. Water sample (250mL; without sample pre-treatment) was filtered through 5µm silicon filters. The infrared spectra identification was performed by OMNIC mathematical correlation, using various spectra libraries for polymers (including the in-house IR spectra library), a background reading on a clean silicon filter, and an aperture of 100µm × 100µm. The validated method showed good accuracy, with an average recovery for representative polymers of 91%, a relative standard deviation of 13%, and a reporting limit (RL) of 44 MPs/L. Sixty WHC samples from the Lisbon water supply system showed MPs ranging from 0 (< RL) to 934 MPs/L, with an average value of 309 MPs/L. The most representative polymers were polyethylene (PE, 76.8%), polyethylene terephthalate (PET, 6.9%), polypropylene (PP, 6%), polystyrene (PS, 4%), and polyamide (PA,4%). In terms of size, the microplastic particles had an average length and width of 76µm and 39µm, respectively.

Macrophage polarization as a novel endpoint for assessing combined risk of phthalate esters

Combined exposure to phthalate esters (PAEs) has garnered increasing attention due to potential synergistic effects on human health. This study aimed to develop an in vitro model using human macrophages to evaluate the combined toxicity of PAEs and explore the underlying mechanisms. A high-throughput screening system was engineered by expressing a PPRE-eGFP reporter in THP-1 monocytes to monitor macrophage polarization upon PAEs exposure. Individual PAEs exhibited varied inhibitory effects on M2 macrophage polarization, with mono(2-ethylhexyl) phthalate (MEHP) being the most potent. Isobologram analysis revealed additive interactions when MEHP was combined with other PAEs, resulting in more pronounced suppression of M2 markers compared to individual compounds. Mechanistic studies suggested PAEs may exert effects by modulating PPARγ activity to inhibit M2 polarization. Notably, an equimolar mixture of six PAEs showed additive inhibition of M2 markers. In vivo experiments corroborated the combined hepatotoxic effects, with mice exposed to a PAEs mixture exhibiting reduced liver weight, dyslipidemia, and decreased hepatic M2 macrophages compared to DEHP alone. Transcriptome analysis highlighted disruptions in PPAR signaling, and distinct pathway alterations on cholesterol metabolism in the mixture group. Collectively, these findings underscore the importance of evaluating mixture effects and provide a novel approach for hazard assessment of combined PAEs exposure with implications for environmental health risk assessment.

Urban environmental monitoring and health risk assessment introducing a fuzzy intelligent computing model.

To enhance the precision of evaluating the impact of urban environments on resident health, this study introduces a novel fuzzy intelligent computing model designed to address health risk concerns using multi-media environmental monitoring data. Three cities were selected for the study: Beijing (B City), Kunming (K City), and Wuxi (W City), representing high, low, and moderate pollution levels, respectively. The study employs a Fuzzy Inference System (FIS) as the chosen fuzzy intelligent computing model, synthesizing multi-media environmental monitoring data for the purpose of urban health risk assessment. (1) The model reliably estimates health risks across diverse cities and environmental conditions. (2) There is a positive correlation between PM2.5 concentrations and health risks, though the impact of noise levels varies by city. In cities B, K, and W, the respective correlation coefficients are 0.65, 0.55, and 0.7. (3) The Root Mean Square Error (RMSE) values for cities B, K, and W, are 0.0132, 0.0125, and 0.0118, respectively, indicating that the model has high accuracy. The R2 values for the three cities are 0.8963, 0.9127, and 0.9254, respectively, demonstrating the model's high explanatory power. The residual values for the three cities are 0.0087, 0.0075, and 0.0069, respectively, indicating small residuals and demonstrating robustness and adaptability. (4) The model's p-values for the Indoor Air Quality Index (IAQI), Thermal Comfort Index (TCI), and Noise Pollution Index (NPI) all satisfy p < 0.05 for the three cities, affirming the model's credibility in estimating health risks under varied urban environments. These results showcase the model's ability to adapt to diverse geographical conditions and aid in the accurate assessment of existing risks in urban settings. This study significantly advances environmental health risk assessment by integrating multidimensional data, enhancing the formulation of comprehensive environmental protection and health management strategies, and providing scientific support for sustainable urban planning.

The exposome concept for assessment of environmental health risks – role of redox biology and oxidative stress

The exposome concept for assessment of environmental health risks – role of redox biology and oxidative stress

Combining chemical analysis and toxicological methods to access the ecological risk of complex contamination in Daye Lake

As one of the nine primary non-ferrous metal smelting bases in China, Daye Lake basin was polluted due to diverse human activities. But so far the pollution status and related ecological risks of this region have not been detailly investigated. In current study, pollutants including heavy metals, polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in eight sediment samples from Daye Lake were quantified. 18S rRNA gene sequencing was employed to profile the nematode community structure within these sediments. Model organism Caenorhabditis elegans (C. elegans) were further applied for a comprehensive ecological risk assessment of Daye Lake. Notably, Cadmium (Cd) was identified as a key driver of ecological risk, reaching an index of 1287.35. At sample point S4, OCPs particularly p,p′-DDT, displayed an extreme ecological risk with a value of 23.19. Cephalobidae and Mononchida showed strong sensitivity to pollutant levels, reinforcing their suitability as robust bioindicators. The composite pollutants in sampled sediments caused oxidative stress in C. elegans, with gene Vit-2 and Mtl-1 as sensitive biomarkers. By employing the multiple analysis methods, our data can offer valuable contributions to environmental monitoring and health risk assessment for composite polluted areas.

The impact of bioaerosol trajectories on microbial community assembly and physicochemical dynamics in the atmosphere

This study explored the assembly mechanisms and physicochemical dynamics of microbial communities within atmospheric bioaerosols, focusing on the influence of different aerial trajectories. Over two years, samples near Seoul were classified into ‘North’, ‘Southwest’, and ‘Others’ categories based on their aerial trajectories. Physicochemical analysis of the PM2.5 particles revealed distinct ion compositions for each cluster, reflecting diverse environmental influences. Microbial community analysis revealed that shared dominant bacterial phyla were present in all clusters. However, distinct taxonomic profiles and biomarkers were also evident, such as coastal bacteria in the ‘Southwest’ cluster correlating with wind speed, and arid soil-originated bacteria in the ‘North’ cluster correlating with cations. These findings demonstrate that biomarkers in each cluster are representative of the distinct environments associated with their aerial trajectories. Notably, cluster ‘Southwest’ the highest microbial diversity and a strong alignment with the neutral community model, suggesting a large influence of passive dispersal from marine environments. Contrarily, ‘North’ and ‘Others’ were more influenced by niche-dependent factors. This study highlights the complex interplay between environmental factors and microbial dynamics in bioaerosols and provides important insights for environmental monitoring and public health risk assessment.

Antagonistic effects of a COX1/2 inhibitor drug in human HepG2 cells exposed to an environmental carcinogen

Understanding interactions between legacy and emerging environmental contaminants has important implications for risk assessment, especially when mutagens and carcinogens are involved, whose critical effects are chronic and therefore difficult to predict. The current work aimed to investigate potential interactions between benzo[a]pyrene (B[a]P), a carcinogenic polycyclic aromatic hydrocarbon and legacy pollutant, and diclofenac (DFC), a non-steroidal anti-inflammatory drug and pollutant of emerging concern, and how DFC affects B[a]P toxicity. Exposure to binary mixtures of these chemicals resulted in substantially reduced cytotoxicity in human HepG2 cells compared to single-chemical exposures. Significant antagonistic effects were observed in response to high concentrations of B[a]P in combination with DFC at IC50 and ⅕ IC50. While additive effects were found for levels of intracellular reactive oxygen species, antagonistic mixture effects were observed for genotoxicity. B[a]P induced DNA strand breaks, γH2AX activation, and micronuclei formation at ½ IC50 concentrations or lower, whereas DFC induced only low levels of DNA strand breaks. Their mixture caused significantly lower levels of genotoxicity by all three endpoints compared to those expected based on concentration additivity. In addition, antagonistic mixture effects on CYP1 enzyme activity suggested that the observed reduced genotoxicity of B[a]P was due to its reduced metabolic activation as a result of enzymatic inhibition by DFC. Overall, the findings further support the growing concern that co-exposure to environmental toxicants and their non-additive interactions may be a confounding factor that should not be neglected in environmental and human health risk assessment.

Characteristic and mechanism of pollution by laser cleaning high-value vehicle parts with a complex structure in remanufacturing industry

Remanufacturing high-value vehicle parts is of substantial significance for the circular economy because it provides a second service life and reduces solid waste generation. Laser cleaning is a promising method in the remanufacturing industry owing to its high energy, precision, and efficiency. However, the pollution caused by laser cleaning remains unknown and has rarely been reported, limiting the application of this method. In this study, pollution removal and conversion using a high-energy laser were explored, and environmental life cycle and health risk assessments were conducted. The results showed that high-energy lasers might induce new organic pollutants, such as olefins, alkynes, and aldehydes. During laser cleaning, thermal elastic expansion and shock wave generation were the main mechanisms of rust removal, and evaporation and small-scope boiling were used for waste oil removal. The mean concentration of PM10 was above 7000 µg/m3 in laser rust removal, and the total concentration of volatile organic compounds (VOCs) was the highest in laser oil removal (∼ 2568 µg/m3). Particulate matter contained high amounts of Fe, Al, and Mn. An environmental life cycle assessment indicated that laser cleaning for stain removal significantly reduced the total environmental impact compared with that of traditional solvent-ultrasonic cleaning (∼ 40.0%) and sandblasting (∼ 83.3%). This study provides an environmental protection basis for increasing the use of laser cleaning in the remanufacturing industry.

Environmental Contamination and Health Risk Assessment of Heavy Metals in the Stream Sediments of Oued Kasseb (Northerwest of Tunisia) in the Vicinity of Abandoned Pb–Zn Mine

Environmental Contamination and Health Risk Assessment of Heavy Metals in the Stream Sediments of Oued Kasseb (Northerwest of Tunisia) in the Vicinity of Abandoned Pb–Zn Mine