Validation of an FT-IR microscopy method for the monitorization of microplastics in water for human consumption in Portugal: Lisbon case study.

Abstract

The growing anthropogenic contamination of natural water by microplastics (MPs) confirms the urgent need to preserve this precious resource. MPs are part of the group of contaminants of emerging concern, and the occurrence studies in surface water and water for human consumption (WHC) are mandatory for environmental and human health risk assessment. This study aims to optimize and validate a Fourier transform infrared spectroscopy method coupled with optical microscopy (micro-FTIR) in transmission mode to monitor MPs in WHC. Water sample (250mL; without sample pre-treatment) was filtered through 5µm silicon filters. The infrared spectra identification was performed by OMNIC mathematical correlation, using various spectra libraries for polymers (including the in-house IR spectra library), a background reading on a clean silicon filter, and an aperture of 100µm × 100µm. The validated method showed good accuracy, with an average recovery for representative polymers of 91%, a relative standard deviation of 13%, and a reporting limit (RL) of 44 MPs/L. Sixty WHC samples from the Lisbon water supply system showed MPs ranging from 0 (< RL) to 934 MPs/L, with an average value of 309 MPs/L. The most representative polymers were polyethylene (PE, 76.8%), polyethylene terephthalate (PET, 6.9%), polypropylene (PP, 6%), polystyrene (PS, 4%), and polyamide (PA,4%). In terms of size, the microplastic particles had an average length and width of 76µm and 39µm, respectively.