Ring-opening Metathesis Polymerization Research Articles

Multimechanophore Polymers for Mechanically Triggered Small Molecule Release with Ultrahigh Payload Capacity.

Polymers that release small molecules in response to mechanical force are promising for a variety of applications including drug delivery, catalysis, and sensing. While a number of mechanophores have been developed for the release of covalently bound payloads, existing strategies are either limited in cargo scope or, in the case of more general mechanophore designs, are restricted to the release of one or two cargo molecules per polymer chain. Herein, we introduce a nonscissile mechanophore based on a masked 2-furylcarbinol derivative that enables the preparation of multimechanophore polymers with ultrahigh payload capacity. We demonstrate that polymers prepared via ring-opening metathesis polymerization are capable of releasing hundreds of small-molecule payloads per polymer chain upon ultrasound-induced mechanochemical activation. This nonscissile masked 2-furylcarbinol mechanophore overcomes a major challenge in cargo loading capacity associated with previous 2-furylcarbinol mechanophore designs, enabling applications that benefit from much higher concentrations of delivered cargo.

Latency for All: Enabling Latency of Hoveyda-Grubbs Second-Generation Catalysts by Adding Phosphite Ligands.

The Hoveyda-Grubbs catalyst (HG2, M720 Umicore) is among the most widely used catalysts in olefin metathesis reactions. Given the usefulness of HG2 and the great interest in developing latent olefin metathesis catalysts for numerous applications, we developed a method to introduce phosphite molecules as ancillary ligands into the precatalyst framework. This modification alters the geometry of the complex from an active trans-dichloro form to a latent cis-dichloro species. Most unusually, the ligands coordinate to HG2 only in solidified solutions (most likely due to entropic factors), providing latent catalysts that can be activated on demand by heat or light by regenerating the original HG2 catalyst. Of particular interest is the use of these latent catalysts in ring-opening metathesis polymerization (ROMP) reactions and 3D printing methods. Indeed, the novel complexes displayed the required latency toward ROMP monomers, even the most reactive dicyclopentadiene. Irradiation with 405 nm light readily results in the expedited formation of the desired polymers. This novel approach provides a general and straightforward way to access efficient and well-defined latent olefin metathesis catalysts.

Alcohol-containing protein transduction domain mimics

The application and design of protein transduction domains (PTDs) and protein transduction domain mimics (PTDMs) have revolutionized the field of biomacromolecule delivery. Our group has previously synthesized block copolymer PTDMs with well-defined hydrophobic and cationic blocks via ring-opening metathesis polymerization (ROMP). We have optimized the balance of hydrophobicity and cationic density to intracellularly deliver model proteins, active proteins, and antibodies. Despite the presence of serine, threonine, and tyrosine in naturally occurring PTDs, synthetic analogs have yet to be studied in PTDMs. In our present work, we introduce different alcohol groups to our PTDM structures as a new design parameter. A library of nine novel PTDMs were synthesized to incorporate alcohol groups of varying structures and evaluated based on their ability to intracellularly deliver fluorescently labeled antibodies. One PTDM in this novel library, named PTDM4, incorporates alcohol groups in both the hydrophobic and cationic blocks and was found to be the best performing PTDM with almost twice the median fluorescence intensity of the delivered antibody and half the cationic density compared to our positive control, a PTDM thoroughly studied by our group. PTDM4 was further studied by intracellularly delivering the active enzyme, TAT-Cre Recombinase. The activity of TAT-Cre Recombinase delivered by PTDM4 was comparable to that of the positive control, again with half the cationic density. This study is one of the first to examine the effects of alcohol groups on intracellular antibody and active enzyme delivery.

Preparation of poly(oxanorbornene) based single and double-folding polymers via nucleophilic aromatic substitution reaction

A facile approach is introduced to prepare single-chain nanoparticles (SCNPs) utilizing intramolecular crosslinking based on nucleophilic aromatic substitution reaction. The linear polymeric precursor comprising dichlorotriazine (DCT) moiety as a reactive pendant group is synthesized via ring-opening metathesis polymerization (ROMP). The reactive chlorine atoms on DCT motifs are substituted with a dithiol nucleophile in varying degrees to yield individually intramolecularly crosslinked polymer nanoparticles. In addition, double-collapse and modification reactions are exploited through the substitution reaction from the remaining unreacted chlorine atoms. A significant reduction in hydrodynamic volumes of the corresponding SCNPs is observed compared to their linear analogues. The obtained nanoparticles are characterized by size exclusion chromatography (SEC), proton nuclear magnetic resonance spectroscopy (1H NMR), diffusion-ordered spectroscopy (DOSY), dynamic light scattering (DLS), and transmission electron microscopy (TEM) techniques.

Evaluating Catalyst Performance in Synthesizing Hydroxyl-Terminated Polybutadiene by Ring-Opening-Metathesis Polymerization

AbstractHydroxyl-terminated polybutadiene (HTPB) can be synthesized by ring-opening metathesis polymerization (ROMP) in a one-step process using cyclooctadiene in the presence of a hydroxyl-functionalized chain-transfer agent (CTA). However, previous studies have shown that the presence of primary alcohols can lead to the degradation of some ruthenium catalysts and that the hydroxyl end groups may be converted into aldehydes. Here we compare the performance of five ruthenium-based catalysts — Grubbs first-, second-, and third-generation catalysts (G1, G2, and G3, respectively), Hoveyda–Grubbs Z-selective catalyst (HGZ), and Hoveyda–Grubbs second-generation catalyst (HG2) — in ROMP with a CTA containing primary alcohols. We found that HTPB can be rapidly synthesized in a single step using G3 while avoiding end-group isomerization (2.2% aldehyde formation after full conversion is reached in 5 min). This result suggests that G3 may enable a more effective approach to synthesizing HTPB that avoids protecting groups but still maintains high end-group fidelity.

Ring-Opening Metathesis Polymerization of the Dewar Isomer of 1,2-Azaborinine, a B-N Isostere of Benzene.

The successful polymerization of the Dewar isomer of an azaborinine heterocycle is reported. Controlled ring-opening metathesis polymerization was accomplished with Grubbs and Hoveya-Grubbs second generation catalysts (G2, HG2), as well as a Z-selective Ru catalyst (HGM2001). The structure of the polymers containing 4-membered B-N heterocycles was verified by GPC and multinuclear and 2D NMR. Differences in stereochemistry of polymers derived from G2/HG2 versus the Z-selective catalyst HGM2001 were substantiated by 2D NOESY, FT-IR, and Raman analyses. The incorporation of B-N heterocycles into these polymer structures is promising as a route to functional polymers that contain polar side groups.

Ring-opening metathesis polymerization of N-methylpyridinium-fused norbornenes to access antibacterial main-chain cationic polymers.

Cationic polymers have been identified as a promising type of antibacterial molecules, whose bioactivity can be tuned through structural modulation. Recent studies suggest that the placement of the cationic groups close to the core of the polymeric architecture rather than on appended side chains might improve both their bioactivity and selectivity for bacterial cells over mammalian cells. However, antibacterial main-chain cationic polymers are typically synthesized via polycondensations, which do not afford precise and uniform molecular design. Therefore, accessing main-chain cationic polymers with high degrees of molecular tunability hinges upon the development of controlled polymerizations tolerating cationic motifs (or cation progenitors) near the propagating species. Herein, we report the synthesis and ring-opening metathesis polymerization (ROMP) of N-methylpyridinium-fused norbornene monomers. The identification of reaction conditions leading to a well-controlled ROMP enabled structural diversification of the main-chain cationic polymers and a study of their bioactivity. This family of polyelectrolytes was found to be active against both Gram-negative (Escherichia coli) and Gram-positive (Methicillin-resistant Staphylococcus aureus) bacteria with minimal inhibitory concentrations as low as 25 µg/mL. Additionally, the molar mass of the polymers was found to impact their hemolytic activity with cationic polymers of smaller degrees of polymerization showing increased selectivity for bacteria over human red blood cells.

Marriage of Organic and Grubbs Catalysts for Tandem Synthesis of Bottlebrush Polyesters.

Bottlebrush polymers (BBPs) have gained wide attention for their special characters, such as rigid main/side chains, stemming from the exceedingly high graft density. This study aims to provide a simple synthetic approach to BBPs with polyester side chains by merging ring-opening alternating copolymerization (ROAP) and ring-opening metathesis polymerization (ROMP). A simple phosphazene base (tBuP1) is employed for the ROAP of phthalic anhydride and epoxide, after which Grubbs third-generation catalyst (G3) is added to in situ switch on ROMP of the macromonomer, i.e., norbornenyl-ended alternating polyester. The compatibility of tBuP1 with G3 and well-controlled ROMP is evidenced by DOSY-NMR of mixed catalysts, characterization of BBPs, and side-chain degradation. The method can also be extended to BBPs with one-step synthesized block copolyesters side chains. These results highlight the strength of the non-nucleophilic organobase catalyst for convenient construction of complex (degradable) polymers with compositional diversity.

A novel polymer-based probe for fluorescently ratiometric sensing of hydrogen sulfide with multiple applications

Hydrogen sulfide (H2S) as an endogenous signaling molecule, plays an irreplaceable role in many important physiological activities. It is also closely related to sewage treatment, wine quality evaluation, and food spoilage. Herein, we have successfully synthesized a novel polymer-based probe P1 for fluorescently ratiometric sensing of H2S with a high selectivity and sensitivity. By virtue of ring-opening metathesis polymerization (ROMP), P1 was prepared with the disulfide bond linked coumarin-norbornene dyad NB-SS-COU as energy donor, the aggregation-induced emission (AIE) fluorophore anchored norbornene NB-TPE as energy receptor, and the polyethylene glycol (PEG) attached norbornene NB-PEG as a hydrophilic chain. At the 400 nm excitation, P1 displays a bright red emission at 615 nm due to the efficient fluorescence resonance energy transfer (FRET) from energy donor COU to energy acceptor TPE. Upon addition of H2S, it shows strong COU-based blue emission at 473 nm for cleavage of the disulfide bond. We also constructed a smartphone sensing platform to conduct visual quantitative detection of H2S by calculating the B/R (blue/red) emission ratio values. Moreover, P1 can be successfully employed in evaluating the level fluctuations of endogenous and exogenous H2S in living cells, testing water samples/wine samples, and monitoring food freshness.

Nanocomposites of polyethylene with Fe3O4 nanoparticles via surface-initiated ROMP: Thermomechanical, shape memory and photothermal properties

The nanocomposites of polyethylene with Fe3O4 nanoparticles (NPs) were synthesized via surface-initiated ring-opening metathesis polymerization (SI-ROMP). First, the surfaces of pristine Fe3O4 NPs were functionalized with (5-nicyclo[2.2.1]hept-2-enyl)ethyl]triethoxylsilane. The as-obtained Fe3O4 NPs functionalized with norbornene were used to mediate the ROMP of cyclooctene (COE). By controlling the mass ratios of COE to the surface-functionalized Fe3O4 NPs, the polycyclooctene-grafted Fe3O4 NPs (denoted PCOE-g-Fe3O4 NPs) were obtained with variable contents of Fe3O4 NPs. Finally, these PCOE-g-Fe3O4 NPs were hydrogenated into the corresponding polyethylene-grafted Fe3O4 NPs (PE-g-Fe3O4 NPs). The nanocomposites of PE with Fe3O4 NPs were successfully synthesized as evidenced by the morphologies that the Fe3O4 NPs were well dispersed in PE matrix at the scale of nanometer. The nanocomposites displayed the mechanical properties superior to plain PE. More importantly, the nanocomposites were capable of displaying superparamagnetic, thermally-induced shape memory and photothermal properties. Furthermore, the photothermal behavior can be utilized to trigger the shape memory properties in a non-contact fashion.

Biomass-Derived Degradable Polymers via Alternating Ring-Opening Metathesis Polymerization of Exo-Oxanorbornenes and Cyclic Enol Ethers.

Degradable polymers made via ring-opening metathesis polymerization (ROMP) hold tremendous promise as eco-friendly materials. However, most of the ROMP monomers are derived from petroleum resources, which are typically considered less sustainable compared to biomass. Herein, we present a synthetic strategy to degradable polymers by harnessing alternating ROMP of biomass-based cyclic olefin monomers including exo-oxanorbornenes and cyclic enol ethers. A library of well-defined poly(enol ether)s with modular structures, tunable glass transition temperatures, and controlled molecular weights was achieved, demonstrating the versatility of this approach. Most importantly, the resulting copolymers exhibit high degrees of alternation, rendering their backbones fully degradable under acidic conditions.

Deconstructable and Chemically Recyclable High-Density Polyethylene (HDPE)-Like Materials Based on Si-O Bonds.

Polyethylene (PE) is the most widely produced synthetic polymer. By installing chemically cleavable bonds into the backbone of PE, it is possible to produce chemically deconstructable PE derivatives; to date, however, such designs have primarily relied on carbonyl- and olefin-related functional groups. Bifunctional silyl ethers (BSEs; SiR2(OR'2)) could expand the functional scope of PE mimics as they possess strong Si-O bonds, excellent oxidative stabilities, and facile chemical tunability. Here, we report BSE-containing high-density polyethylene (HDPE)-like materials synthesized through a one-pot catalytic ring-opening metathesis polymerization (ROMP) and hydrogenation sequence. The crystallinity of these materials can be adjusted by varying the BSE concentration or the steric bulk of the Si-substituents, providing handles to control thermomechanical properties while maintaining the high thermal stability of HDPE. Two methods for chemical recycling of HDPE mimics are introduced, including a circular approach that leverages acid-catalyzed Si-O bond exchange with 1-propanol. Additionally, despite the fact that the starting HDPE mimics were synthesized by chain-growth polymerization (ROMP), we show that it is possible to recover the molar mass and dispersity of recycled HDPE products using step-growth Si-O bond formation or exchange, generating high molecular weight recycled HDPE products with mechanical properties similar to commercial HDPE.

Thermally Robust yet Deconstructable and Chemically Recyclable High‐Density Polyethylene (HDPE)‐Like Materials Based on Si−O Bonds

AbstractPolyethylene (PE) is the most widely produced synthetic polymer. By installing chemically cleavable bonds into the backbone of PE, it is possible to produce chemically deconstructable PE derivatives; to date, however, such designs have primarily relied on carbonyl‐ and olefin‐related functional groups. Bifunctional silyl ethers (BSEs; SiR2(OR′2)) could expand the functional scope of PE mimics as they possess strong Si−O bonds and facile chemical tunability. Here, we report BSE‐containing high‐density polyethylene (HDPE)‐like materials synthesized through a one‐pot catalytic ring‐opening metathesis polymerization (ROMP) and hydrogenation sequence. The crystallinity of these materials can be adjusted by varying the BSE concentration or the steric bulk of the Si‐substituents, providing handles to control thermomechanical properties. Two methods for chemical recycling of HDPE mimics are introduced, including a circular approach that leverages acid‐catalyzed Si−O bond exchange with 1‐propanol. Additionally, despite the fact that the starting HDPE mimics were synthesized by chain‐growth polymerization (ROMP), we show that it is possible to recover the molar mass and dispersity of recycled HDPE products using step‐growth Si−O bond formation or exchange, generating high molecular weight recycled HDPE products with mechanical properties similar to commercial HDPE.

Tuning the Latency by Anionic Ligand Exchange in Ruthenium Benzylidene Phosphite Complexes

Recently discovered cis-dichloro benzylidene phosphite complexes are latent catalysts at room temperature and exhibit exceptional thermal and photochemical activation behavior in olefin metathesis reactions. Most importantly, the study of these catalysts has allowed their introduction in efficient 3-D printing applications of ring-opening metathesis derived polymers and the control of chromatically orthogonal chemical processes. Moreover, their combination with plasmonic Au-nanoparticles has given rise to novel smart materials that are responsive to light. Given the importance of the ligand shell in the initiation and reactivity behavior of this family of complexes, we set out to investigate the effect of anionic ligand exchange. Thus, we report herein two new ruthenium benzylidene benzylphosphite complexes where the chloride anionic ligands have been replaced by bromide and iodide anions (cis-Ru-Phos-Br2 & cis-Ru-Phos-I2). The thermal and photochemical activations of these dormant catalysts in a variety of ring-closing and ring-opening metathesis polymerization (RCM and ROMP) reactions were thoroughly studied and compared with the previously known chloride precatalyst. Photochemical RCM studies provided similar results, especially in non-hindered reactions, with the UV-A wavelength being the best in all cases. On the other hand, the thermal activation profile exposed that the anionic ligand significantly affects reactivity. Notably, cis-Ru-Phos-I2 disclosed particularly impressive initiation efficiency compared to the other members of the family.

Surface Chain-Transfer Ring-Opening Metathesis Polymerization.

Ring-opening metathesis polymerization (ROMP) is a powerful method to graft various types of polymer chains to a given surface. While surface-initiated ROMP (SI-ROMP) serves as an efficient tool for surface modification and is therefore widely reported, the method requires grafting (1) the olefin substrate and (2) the metathesis catalyst to the surface prior to the polymerization with multiple synthetic and work up steps. To overcome this difficulty, we proposed the use of the chain-transfer reaction as an alternative method for surface modification. Terminal olefins are grafted to the surface without the need to graft the metathesis catalysts, and polymers with olefin backbones are polymerized and grafted simultaneously via both ROMP and chain transfer (cross-metathesis between olefins from backbones and surfaces). Compared to SI-ROMP, this surface-chain transfer ROMP (SC-ROMP) method avoids grafting the catalyst and growing polymer chains from the surface and could be achieved in a single step. Various types of surfaces like carbon nanotubes, carbon fibers, graphene nanosheets, and silica microspheres are used for demonstration. We envision that this work could bring a convenient and effective solution to surface modification via ROMP.

Synthesis, characterization, and optical properties of ROMP copolymers with pendant carbazole and coumarin groups

Two series of random copolymers containing at the same time two fluorescent groups, carbazole and coumarin, linked to a poly(norbornene dicarboximide) backbone have been prepared by controlled ring-opening metathesis polymerization (ROMP), promoted by Grubbs’ third generation catalyst (G3). The relative amount of the two functionalities was systematically varied along the copolymer chain, and the high degree of structural control observed allowed also for the preparation of a block copolymer with an equimolar content of fluorophore groups.In comparison to the related homopolymers, all the random copolymers exhibited in solution typical photoluminescence due to the carbazole or coumarin moiety, together with fluorescence arising from the energy transfer from the donor carbazole groups to the acceptor coumarin groups. This energy transfer seems to occur through intramolecular interactions, as it is not observed in the block copolymer and in the 50/50 homopolymer blend. On the other hand, in the solid state also the energy transfer from carbazole to coumarin through interchain interactions can take place. Of note, moving from solution to solid state fluorescence analysis, a blue shift of the band related to the energy transfer phenomenon is observed. This finding could be related to a combined effect of energy and electron transfer from donor to acceptor.

Artificial intelligence-based optimization for ring-opening metathesis polymerization of proton exchange membrane

Artificial intelligence-based optimization for ring-opening metathesis polymerization of proton exchange membrane

Flow Optimization of Photoredox-Mediated Metal-Free Ring-Opening Metathesis Polymerization.

Photoredox-mediated metal-free ring-opening metathesis polymerization (MF-ROMP) is a convenient metal-free method to produce a variety of ROMP polymers. Transitioning MF-ROMP from a batch to a continuous flow process has yet to be demonstrated and could potentially benefit the production efficiency, safety, and modularity of reaction conditions. We designed and evaluated continuous flow and droplet flow setups and compared the results for MF-ROMP across a short series of common monomers. By using the droplet flow reactor setup, we achieved flow conversions comparable to that of batch and circumvented issues with diffusion-limited mixing and air exposure.

Chemically recyclable polyolefin-like multiblock polymers.

Polyolefins are the most important and largest volume plastics produced. Unfortunately, the enormous use of plastics and lack of effective disposal or recycling options have created a plastic waste catastrophe. In this work, we report an approach to create chemically recyclable polyolefin-like materials with diverse mechanical properties through the construction of multiblock polymers from hard and soft oligomeric building blocks synthesized with ruthenium-mediated ring-opening metathesis polymerization of cyclooctenes. The multiblock polymers exhibit broad mechanical properties, spanning elastomers to plastomers to thermoplastics, while integrating a high melting transition temperature (Tm) and low glass transition temperature (Tg), making them suitable for use across diverse applications (Tm as high as 128°C and Tg as low as -60°C). After use, the different plastics can be combined and efficiently deconstructed back to the fundamental hard and soft building blocks for separation and repolymerization to realize a closed-loop recycling process.

Structure and properties of bottlebrush polyelectrolyte complexes

AbstractStructural variation of polyelectrolytes has been shown to play an important role in altering polyelectrolyte complex (PEC) properties in recent years. However, molecular‐level details such as polyelectrolyte architecture remain underdeveloped. Here, we use a combination of ring‐opening metathesis polymerization (ROMP), atom‐transfer radical polymerization (ATRP), and postpolymerization reactions to create densely branched bottlebrushes of poly(dimethylamino ethyl methcacrylate) and poly(tert‐butyl methacrylate) with high molecular weights (MDa), which we then convert into fully charged and densely branched bottlebrushes of poly(trimethylaminoethyl methacrylate) (PTMAEMA) and poly(methacrylic acid) (PAA). We investigate the structure and properties of bottlebrush polyelectrolyte complexes (BPECs) using optical microscopy, rheology, cryogenic transmission electron microscopy (Cryo‐TEM), and small‐angle X‐ray scattering (SAXS). Bottlebrush polyelectrolyte complexes are white solids, which exhibit gel‐like mechanical properties, which we attribute to sidechain interpenetration. Using a combination of Cryo‐TEM and SAXS, we are able to outline the structural development of BPECs, detailing how the network topology, sidechain conformation, and interdigitation spacing changes as a function of salt. Our results provide a foundation for further exploration of branched architectures within polyelectrolyte complexation.