Ribo-seq Data Research Articles

Insights into the mechanisms of eukaryotic translation gained with ribosome profiling.

The development of Ribosome Profiling (RiboSeq) has revolutionized functional genomics. RiboSeq is based on capturing and sequencing of the mRNA fragments enclosed within the translating ribosome and it thereby provides a ‘snapshot’ of ribosome positions at the transcriptome wide level. Although the method is predominantly used for analysis of differential gene expression and discovery of novel translated ORFs, the RiboSeq data can also be a rich source of information about molecular mechanisms of polypeptide synthesis and translational control. This review will focus on how recent findings made with RiboSeq have revealed important details of the molecular mechanisms of translation in eukaryotes. These include mRNA translation sensitivity to drugs affecting translation initiation and elongation, the roles of upstream ORFs in response to stress, the dynamics of elongation and termination as well as details of intrinsic ribosome behavior on the mRNA after translation termination. As the RiboSeq method is still at a relatively early stage we will also discuss the implications of RiboSeq artifacts on data interpretation.

Transcriptional and translational regulation by RNA thermometers, riboswitches and the sRNA DsrA in Escherichia coli O157:H7 Sakai under combined cold and osmotic stress adaptation.

The enteric pathogen Escherichia coli O157:H7 Sakai (EHEC) is able to grow at lower temperatures compared to commensal E.coli Growth at environmental conditions displays complex challenges different to those in a host. EHEC was grown at 37°C and at 14°C with 4% NaCl, a combination of cold and osmotic stress as present in the food chain. Comparison of RNAseq and RIBOseq data provided a snap shot of ongoing transcription and translation, differentiating transcriptional and post-transcriptional gene regulation, respectively. Indeed, cold and osmotic stress related genes are simultaneously regulated at both levels, but translational regulation clearly dominates. Special emphasis was given to genes regulated by RNA secondary structures in their 5'UTRs, such as RNA thermometers and riboswitches, or genes controlled by small RNAs encoded in trans The results reveal large differences in gene expression between short-time shock compared to adaptation in combined cold and osmotic stress. Whereas the majority of cold shock proteins, such as CspA, are translationally downregulated after adaptation, many osmotic stress genes are still significantly upregulated mainly translationally, but several also transcriptionally.

Gene Regulation in Developing Chloroplasts Disentangled.

Gene Regulation in Developing Chloroplasts Disentangled.

RiboSeq.Org:resources for the alignment, analysis and exploration of ribo-seq data

RiboSeq.Org:resources for the alignment, analysis and exploration of ribo-seq data

Estimation of ribosome profiling performance and reproducibility at various levels of resolution.

BackgroundRibosome profiling (or Ribo-seq) is currently the most popular methodology for studying translation; it has been employed in recent years to decipher various fundamental gene expression regulation aspects.The main promise of the approach is its ability to detect ribosome densities over an entire transcriptome in high resolution of single codons. Indeed, dozens of ribo-seq studies have included results related to local ribosome densities in different parts of the transcript; nevertheless, the performance of Ribo-seq has yet to be quantitatively evaluated and reported in a large-scale multi-organismal and multi-protocol study of currently available datasets.ResultsHere we provide the first objective evaluation of Ribo-seq at the resolution of a single nucleotide(s) using clear, interpretable measures, based on the analysis of 15 experiments, 6 organisms, and a total of 612, 961 transcripts. Our major conclusion is that the ability to infer signals of ribosomal densities at nucleotide scale is considerably lower than previously thought, as signals at this level are not reproduced well in experimental replicates. In addition, we provide various quantitative measures that connect the expected error rate with Ribo-seq analysis resolution.ConclusionsThe analysis of Ribo-seq data at the resolution of codons and nucleotides provides a challenging task, calls for task-specific statistical methods and further protocol improvements. We believe that our results are important for every researcher studying translation and specifically for researchers analyzing data generated by the Ribo-seq approach.ReviewersThis article was reviewed by Dmitrij Frishman, Eugene Koonin and Frank Eisenhaber.Electronic supplementary materialThe online version of this article (doi:10.1186/s13062-016-0127-4) contains supplementary material, which is available to authorized users.

Assessment of translational importance of mammalian mRNA sequence features based on Ribo-Seq and mRNA-Seq data.

Ribosome profiling technology (Ribo-Seq) allowed to highlight more details of mRNA translation in cell and get additional information on importance of mRNA sequence features for this process. Application of translation inhibitors like harringtonine and cycloheximide along with mRNA-Seq technique helped to assess such important characteristic as translation efficiency. We assessed the translational importance of features of mRNA sequences with the help of statistical analysis of Ribo-Seq and mRNA-Seq data. Translationally important features known from literature as well as proposed by the authors were used in analysis. Such comparisons as protein coding versus non-coding RNAs and high- versus low-translated mRNAs were performed. We revealed a set of features that allowed to discriminate the compared categories of RNA. Significant relationships between mRNA features and efficiency of translation were also established.

RiboGalaxy: A browser based platform for the alignment, analysis and visualization of ribosome profiling data

ABSTRACTRibosome profiling (ribo-seq) is a technique that uses high-throughput sequencing to reveal the exact locations and densities of translating ribosomes at the entire transcriptome level. The technique has become very popular since its inception in 2009. Yet experimentalists who generate ribo-seq data often have to rely on bioinformaticians to process and analyze their data. We present RiboGalaxy (http://ribogalaxy.ucc.ie), a freely available Galaxy-based web server for processing and analyzing ribosome profiling data with the visualization functionality provided by GWIPS-viz (http://gwips.ucc.ie). RiboGalaxy offers researchers a suite of tools specifically tailored for processing ribo-seq and corresponding mRNA-seq data. Researchers can take advantage of the published workflows which reduce the multi-step alignment process to a minimum of inputs from the user. Users can then explore their own aligned data as custom tracks in GWIPS-viz and compare their ribosome profiles to existing ribo-seq tracks from published studies. In addition, users can assess the quality of their ribo-seq data, determine the strength of the triplet periodicity signal, generate meta-gene ribosome profiles as well as analyze the relative impact of mRNA sequence features on local read density. RiboGalaxy is accompanied by extensive documentation and tips for helping users. In addition we provide a forum (http://gwips.ucc.ie/Forum) where we encourage users to post their questions and feedback to improve the overall RiboGalaxy service.

Quantitative assessment of ribosome drop-off in E. coli.

Premature ribosome drop-off is one of the major errors in translation of mRNA by ribosomes. However, repeated analyses of Ribo-seq data failed to quantify its strength in E. coli. Relying on a novel highly sensitive data analysis method we show that a significant rate of ribosome drop-off is measurable and can be quantified also when cells are cultured under non-stressing conditions. Moreover, we find that the drop-off rate is highly variable, depending on multiple factors. In particular, under environmental stress such as amino acid starvation or ethanol intoxication, the drop-off rate markedly increases.

Detecting actively translated open reading frames in ribosome profiling data.

RNA-sequencing protocols can quantify gene expression regulation from transcription to protein synthesis. Ribosome profiling (Ribo-seq) maps the positions of translating ribosomes over the entire transcriptome. We have developed RiboTaper (available at https://ohlerlab.mdc-berlin.de/software/), a rigorous statistical approach that identifies translated regions on the basis of the characteristic three-nucleotide periodicity of Ribo-seq data. We used RiboTaper with deep Ribo-seq data from HEK293 cells to derive an extensive map of translation that covered open reading frame (ORF) annotations for more than 11,000 protein-coding genes. We also found distinct ribosomal signatures for several hundred upstream ORFs and ORFs in annotated noncoding genes (ncORFs). Mass spectrometry data confirmed that RiboTaper achieved excellent coverage of the cellular proteome. Although dozens of novel peptide products were validated in this manner, few of the currently annotated long noncoding RNAs appeared to encode stable polypeptides. RiboTaper is a powerful method for comprehensive de novo identification of actively used ORFs from Ribo-seq data.

The use of duplex-specific nuclease in ribosome profiling and a user-friendly software package for Ribo-seq data analysis.

Ribosome profiling is a technique that permits genome-wide, quantitative analysis of translation and has found broad application in recent years. Here we describe a modified profiling protocol and software package designed to benefit more broadly the translation community in terms of simplicity and utility. The protocol, applicable to diverse organisms, including organelles, is based largely on previously published profiling methodologies, but uses duplex-specific nuclease (DSN) as a convenient, species-independent way to reduce rRNA contamination. We show that DSN-based depletion compares favorably with other commonly used rRNA depletion strategies and introduces little bias. The profiling protocol typically produces high levels of triplet periodicity, facilitating the detection of coding sequences, including upstream, downstream, and overlapping open reading frames (ORFs) and an alternative ribosome conformation evident during termination of protein synthesis. In addition, we provide a software package that presents a set of methods for parsing ribosomal profiling data from multiple samples, aligning reads to coding sequences, inferring alternative ORFs, and plotting average and transcript-specific aspects of the data. Methods are also provided for extracting the data in a form suitable for differential analysis of translation and translational efficiency.

RiboGalaxy: a platform for the alignment, analysis and visualization of ribo-seq data

RiboGalaxy: a platform for the alignment, analysis and visualization of ribo-seq data

GWIPS-viz as a tool for exploring ribosome profiling evidence supporting the synthesis of alternative proteoforms.

The boundaries of protein coding sequences are more difficult to define at the 5′ end than at the 3′ end due to potential multiple translation initiation sites (TISs). Even in the presence of phylogenetic data, the use of sequence information only may not be sufficient for the accurate identification of TISs. Traditional proteomics approaches may also fail because the N‐termini of newly synthesized proteins are often processed. Thus ribosome profiling (ribo‐seq), producing a snapshot of the ribosome distribution across the entire transcriptome, is an attractive experimental technique for the purpose of TIS location exploration. The GWIPS‐viz (Genome Wide Information on Protein Synthesis visualized) browser (http://gwips.ucc.ie) provides free access to the genomic alignments of ribo‐seq data and corresponding mRNA‐seq data along with relevant annotation tracks. In this brief, we illustrate how GWIPS‐viz can be used to explore the ribosome occupancy at the 5′ ends of protein coding genes to assess the activity of AUG and non‐AUG TISs responsible for the synthesis of proteoforms with alternative or heterogeneous N‐termini. The presence of ribo‐seq tracks for various organisms allows for cross‐species comparison of orthologous genes and the availability of datasets from multiple laboratories permits the assessment of the technical reproducibility of the ribosome densities.

RiboTools: a Galaxy toolbox for qualitative ribosome profiling analysis.

Ribosome profiling provides genome-wide information about translational regulation. However, there is currently no standard tool for the qualitative analysis of Ribo-seq data. We present here RiboTools, a Galaxy toolbox for the analysis of ribosome profiling (Ribo-seq) data. It can be used to detect translational ambiguities, stop codon readthrough events and codon occupancy. It provides a large number of plots for the visualisation of these events.

Computational approach for calculating the probability of eukaryotic translation initiation from ribo-seq data that takes into account leaky scanning.

BackgroundRibosome profiling (ribo-seq) provides experimental data on the density of elongating or initiating ribosomes at the whole transcriptome level that can be potentially used for estimating absolute levels of translation initiation at individual Translation Initiation Sites (TISs). These absolute levels depend on the mutual organisation of TISs within individual mRNAs. For example, according to the leaky scanning model of translation initiation in eukaryotes, a strong TIS downstream of another strong TIS is unlikely to be productive, since only a few scanning ribosomes would be able to reach the downstream TIS. In order to understand the dependence of translation initiation efficiency on the surrounding nucleotide context, it is important to estimate the strength of TISs independently of their mutual organisation, i.e. to estimate with what probability a ribosome would initiate at a particular TIS.ResultsWe designed a simple computational approach for estimating the probabilities of ribosomes initiating at individual start codons using ribosome profiling data. The method is based on the widely accepted leaky scanning model of translation initiation in eukaryotes which postulates that scanning ribosomes may skip a start codon if the initiation context is unfavourable and continue on scanning. We tested our approach on three independent ribo-seq datasets obtained in mammalian cultured cells.ConclusionsOur results suggested that the method successfully discriminates between weak and strong TISs and that the majority of numerous non-AUG TISs reported recently are very weak. Therefore the high frequency of non-AUG TISs observed in ribosome profiling experiments is due to their proximity to mRNA 5′-ends rather than their strength. Detectable translation initiation at non-AUG codons downstream of AUG codons is comparatively infrequent. The leaky scanning method will be useful for the characterization of differences in start codon selection between tissues, developmental stages and in response to stress conditions.Electronic supplementary materialThe online version of this article (doi:10.1186/s12859-014-0380-4) contains supplementary material, which is available to authorized users.

Detecting translational regulation by change point analysis of ribosome profiling data sets.

Ribo-Seq maps the location of translating ribosomes on mature mRNA transcripts. While during normal translation, ribosome density is constant along the length of the mRNA coding region, this can be altered in response to translational regulatory events. In the present study, we developed a method to detect translational regulation of individual mRNAs from their ribosome profiles, utilizing changes in ribosome density. We used mathematical modeling to show that changes in ribosome density should occur along the mRNA at the point of regulation. We analyzed a Ribo-Seq data set obtained for mouse embryonic stem cells and showed that normalization by corresponding RNA-Seq can be used to improve the Ribo-Seq quality by removing bias introduced by deep-sequencing and alignment artifacts. After normalization, we applied a change point algorithm to detect changes in ribosome density present in individual mRNA ribosome profiles. Additional sequence and gene isoform information obtained from the UCSC Genome Browser allowed us to further categorize the detected changes into different mechanisms of regulation. In particular, we detected several mRNAs with known post-transcriptional regulation, e.g., premature termination for selenoprotein mRNAs and translational control of Atf4, but also several more mRNAs with hitherto unknown translational regulation. Additionally, our approach proved useful for identification of new transcript isoforms.

GWIPS-viz: development of a ribo-seq genome browser

We describe the development of GWIPS-viz (http://gwips.ucc.ie), an online genome browser for viewing ribosome profiling data. Ribosome profiling (ribo-seq) is a recently developed technique that provides genome-wide information on protein synthesis (GWIPS) in vivo. It is based on the deep sequencing of ribosome-protected messenger RNA (mRNA) fragments, which allows the ribosome density along all mRNA transcripts present in the cell to be quantified. Since its inception, ribo-seq has been carried out in a number of eukaryotic and prokaryotic organisms. Owing to the increasing interest in ribo-seq, there is a pertinent demand for a dedicated ribo-seq genome browser. GWIPS-viz is based on The University of California Santa Cruz (UCSC) Genome Browser. Ribo-seq tracks, coupled with mRNA-seq tracks, are currently available for several genomes: human, mouse, zebrafish, nematode, yeast, bacteria (Escherichia coli K12, Bacillus subtilis), human cytomegalovirus and bacteriophage lambda. Our objective is to continue incorporating published ribo-seq data sets so that the wider community can readily view ribosome profiling information from multiple studies without the need to carry out computational processing.

Stage Hypnotism

<h3>Abstract</h3> <h3>Summary</h3> Ribosome profiling enables genome-wide analysis of translation with unprecedented resolution. We present <i>Ribo-seQC</i>, a versatile tool for the comprehensive analysis of Ribo-seq data, providing in-depth insights on data quality and translational profiles for cytoplasmic and organelle ribosomes. <i>Ribo-seQC</i> automatically generates platform-independent HTML reports, offering a detailed and easy-to-share basis for collaborative Ribo-seq projects. <h3>Availability</h3> Ribo-seQC is available at https://github.com/ohlerlab/RiboseQC and submitted to Bioconductor. <h3>Contact</h3> uwe.ohler@mdc-berlin.de