Reversible Temperature Research Articles

Fast detection of humidity sensor with a weakly coupled fiber coated with carbomer

Humidity, as one of the basic environmental physical quantities, is essential in medical monitoring, food production and pharmaceutical industries.Fast and highly sensitive humidity sensing technology has become an urgent need in areas such as medical monitoring. We proposed and realized a novel coupled fiber-optic humidity sensor based on double tapered fiber twisted weakly coupled structure coated with carbomer film. The sensor adopts 2 × 2 coupler structure with waist diameter of 10 μm. The Carbomer film is coated in the weakly coupled area to improve the sensitivity of the sensor, and the thickness of this coating is about 79.2 nm. The sensor provides linear sensing over a relative humidity range of 40%–65% RH, with a dynamic response time of 208 ms and a recovery time of 464 ms. The sensitivity of the sensor is up to −0.28 dB/%RH and the linearity of the sensor is as high as 99.89%. Moreover, the sensor has good stability, reversibility, and low temperature crosstalk. Based on these characteristics, it can be expected that the sensor will bring a great breakthrough in applications where sensitive monitoring of humidity is required.

Exploring the Magnetism of C5/C2B3 Heteroleptic Organolanthanide Sandwiches

Comprehensive SummaryTwo families of cyclopentadienyl (Cp)/carboranyl heteroleptic sandwiched organolanthanide complexes, namely [Ln{η5:σ‐Me2C(C5H4)(C2B10H10)}2][Li(DME)3] (1Ln, Ln = Tb, Dy, Ho, Er) and [2‐THF‐2'‐(μ2‐Cl)Li(THF)3‐2,2'‐Ln(nido‐1,7‐C2B9H11)Cp*] (2Dy), were synthesized. Family of 1Ln has been proposed based on the mixing‐ligands idea by linking Cp and nido‐dicarborllide. However, the carborane cage of [Me2C(C5H4)(C2B10H10)]2− deprotons and forms a mono‐C− anion rather than deboron to form dicarborllide dianion. Hence, the family of 1Ln features a dysprosocenium skeleton with extra two coordination of C− anions of carborllides. Such coordination geometry is more like a tetrahedron if abstracting the centroids of two coordinated Cp rings. In this cubic‐type geometry, no significant magnetic axiality is presented; only 1Dy and 1Tb show field‐induced slow magnetic relaxation behavior below 10 K. Inspired by 1Ln, the free pentamethylcyclopentadienyl (Cp*−) and nido‐dicarborllide ligands are used to sandwich central Dy3+ ion, achieving heteroleptic complex 2Dy. The bending angle by linking the centroid of Cp*−, Dy3+ and C2B32− in 2Dy is increased to 132.8(1)°. As such, the effective energy barrier for magnetic reversal (Ueff) and magnetic blocking temperature TB (ZFC) are both increased (Ueff = 616(10) K; TB = 6 K). The effort of further enhancing Ueff and TB in such heteroleptic organolanthanide sandwiches should rely on keeping increasing the ligand axiality.

Preparation and performance study of thermo-responsive P(NIPAM-AM-ABP)/keratin composite nanofiber membrane for bio-application

This paper describes a temperature-responsive composite nanofibrous membrane by blending of the P(NIPAM-AM-ABP) (PNAA) nanofiber and the wool keratin (WK) nanofiber. The photo crosslinkable PNAA with the LCST value of 38.1 °C was obtained by free radical copolymerization of the temperature sensitive N-Isopropylacrylamide (NIPAM) monomer, the hydrophilic monomer Acrylamide (AM), and the photo crosslinkable monomer 4-Acryloyloxybenzophenone (ABP). Keratin was extracted from waste wool fiber by reduction method. The PNAA nanofiber (PNAA-NF) and the keratin nanofiber (WK-NF) were electoral spun separately by two-needle parallel spinning, and the obtained composite nanofiber membrane was then crosslinked by UV irradiation and heat treatments to prepare the PNAA/WK nanofiber membrane (PNAA/WK-NFM) with good water tolerance. The result indicated that the photo cross-linkable temperature sensitive PNAA with the LCST of 38.1 °C was successfully synthesized. The obtained PNAA/WK-NFM has a good fibrous morphology and excellent water tolerance. The composite nanofiber membrane showed good reversible temperature sensitivity and temperature responsive drug releasing property due to the PNAA. By combining of the PNAA-NF and WK-NF, the mechanical property of the PNAA/WK-NFM was greatly enhanced in both dry and wet states, and the slow drug releasing property of the membrane was further improved. In-vitro cell culture experiments indicated that the PNAA/WK-NFM has a good biocompatibility with no cytotoxicity. These findings suggested that the PNAA/WK-NFM has a potential application in temperature responsive drug releasing biomaterials.

A Thermosensitive and Degradable Chitin-Based Hydrogel as a Brucellosis Vaccine Adjuvant.

Brucellosis is a zoonotic infectious disease that has long endangered the development of animal husbandry and human health. Currently, vaccination stands as the most efficacious method for preventing and managing brucellosis. Alum, as the most commonly used adjuvant for the brucellosis vaccine, has obvious disadvantages, such as the formation of granulomas and its non-degradability. Therefore, the aims of this study were to prepare an absorbable, injectable, and biocompatible hydroxypropyl chitin (HPCT) thermosensitive hydrogel and to evaluate its immunization efficacy as an adjuvant for Brucella antigens. Specifically, etherification modification of marine natural polysaccharide chitin was carried out to obtain a hydroxypropyl chitin. Rheological studies demonstrated the reversible temperature sensitivity of HPCT hydrogel. Notably, 5 mg/mL of bovine serum albumin can be loaded in HPCT hydrogels and released continuously for more than one week. Furthermore, the L929 cytotoxicity test and in vivo degradation test in rats proved that an HPCT hydrogel had good cytocompatibility and histocompatibility and can be degraded and absorbed in vivo. In mouse functional experiments, as adjuvants for Brucella antigens, an HPCT hydrogel showed better specific antibody expression levels and cytokine (Interleukin-4, Interferon-γ) expression levels than alum. Thus, we believe that HPCT hydrogels hold much promise in the development of adjuvants.

InP/ZnS Quantum Dots for High-Sensitivity Temperature Sensors.

In this work, we report the synthesis of high-quality, nontoxic InP/ZnS core-shell quantum dots (QDs). The temperature-dependent optical properties such as photoluminescence (PL), absorption, and PL decay with time have been investigated. Based on the temperature dependence of optical properties of QDs, three different configurations of temperature sensors using PMMA as the QD host material were fabricated. The temperature sensor configurations are planar thin-film (InP/ZnS QD)/PMMA deposited on a Si wafer (sensor 1), (InP/ZnS QD)/PMMA-filled borosilicate fibers (sensor 2), and InP/ZnS QD-doped electrospun PMMA nanofibers deposited on a Si wafer (sensor 3). After fabrication, the performance of the temperature sensors have been thoroughly investigated through photoluminescence reversibility tests in consecutive heating-cooling cycles, and the sensitivity of the sensors has been calculated. The three sensors have shown different critical reversible temperatures above which they go through irreversible structural damage and lose their reversibility. The highest critical reversible temperature of 95 °C and the highest sensitivity of 2.1% °C-1 have been achieved, which are comparable to Cd- and dye-based temperature sensors reported to date. The sensors were found to be highly stable, which demonstrated negligible degradation even after 30 days of exposure to ambient conditions. The InP/ZnS QD-based optical temperature sensors can be considered to be a potential replacement for toxic heavy-metal QD-based optical temperature sensors.

Low temperature phase transitions in the visible and near-infrared (VNIR) reflectance spectra of (NH4)2HPO4 and (NH4)HSO4 salts

The detection of ammonium bearing crystalline solids in salt-water systems on icy bodies and solar system bodies could provide information about the ascent of these salts from a deep reservoir within the hydrosphere. Due to their chemical-physical properties, NH4+ compounds play a key role both in the internal dynamics of celestial bodies and in the potential habitability of ocean worlds. In this work we analysed the reflectance spectra of two synthetic NH4+ salts: ammonium hydrogen phosphate (NH4)2HPO4 and ammonium hydrogen sulphate (NH4)HSO4 in the 1–4.2 μm spectral range at low temperature, between 110 and 290 K. For (NH4)2HPO4 we also examined the effect of three different grain sizes (150–125 μm; 125–80 μm; 80–32 μm). The collected reflectance spectra show absorption features related to NH4+ group overtone and combination modes in the 1–2.5 μm range. In particular, the bands located at ∼1.09 μm (3ν3), ∼1.30 μm (2ν3 + ν4), ∼1.58 μm (2ν3), ∼2.02 μm (ν2 + v3) and ∼ 2.2 μm (v3 + v4) could be useful to discriminate these salts. The low temperature spectra, compared to those at ambient temperature, reveal finer structures, displaying sharper and narrower absorption bands. The selected NH4+-bearing salts are subjected to reversible low temperature phase transitions, which are revealed in the spectra by a progressive growth and shift of the bands toward shorter wavelengths with a drastic change of their depth. We performed laboratory measurements of ammonium (NH4+) compounds to address the limited data available expanding the existing database. The collected cryogenic spectra can be directly compared with remote sensing data from planetary missions of the upcoming decade such as NASA's Europa Clipper, and ESA's JUICE and the newly launched James Webb Space Telescope expanding the existing database of ammonium compounds at cryogenic temperature.

The influence of pre-strain on the microstructure and recovery properties of cold-rolled TiNiFe alloy tube

Abstract In the present work, the influence of pre-strain on the microstructures and recovery properties of cold-rolled TiNiFe shape memory alloy tube are studied by pre-strain system, phase transformation testing system, electron backscattered diffraction (EBSD) and transmission electron microscope (TEM). It is demonstrated that the pre-strain has significant effects on the recovery properties, transformation temperatures, and microstructures of TiNiFe alloy. With the increase of pre-strain, the kernel average misorientation (KAM) value and the dislocation pill-up increase, causing the recovery rate of the TiNiFe alloy decreases linearly, and maximum of recovery strain is 8%. And the reverse martensite transformation start temperature (TRs) increases from -133°C to -105°C and TRf increases from -124°C to -97°C, as the increase of pre-strain.

Dual Luminescent Mn(II)-Doped Cu-In-Zn-S Quantum Dots as Temperature Sensors in Water.

CuInS2 quantum dots have emerged in the last years as non-toxic alternative to traditional Pb and Cd based quantum dots, especially for biological applications. In this work, the hydrothermal synthesis of alloyed Cu-In-Zn-S quantum dots (CIZS) doped with manganese(II) is explored, with different metal ratios (Mn-CIZSy). The doped quantum dots show the sensitized emission of Mn2+ (approximately ms lifetime), together with the emission of the CIZS structure (approximately µs lifetime). The relative contribution of Mn2+ emission is highly dependent on the composition of the CIZS hosting structure (In:Cu ratio). In addition to that, it is shown that Mn2+ sensitization requires a threshold energy, which suggests the involvement of an intermediate state in the sensitization mechanism. The long-lived emission intensity decay of Mn2+ shows a stable and reversible temperature response in physiological conditions (25-45°C, pH = 7.4). Mn-CIZSy quantum dots are thus interesting candidates as biological luminescent temperature probe thanks to their easy synthesis, high colloidal stability, insensitivity to dioxygen quenching and quantitative time-gated detection.

Improving intergranular cracking and stress corrosion cracking resistance of highly sensitized AA5083 Al-Mg alloy via reversion heat treatment

This study systematically examines the impact of reversion heat treatments (220–280 ℃ for 1 h) on the microstructure evolution, electrochemical corrosion, intergranular cracking (IGC) and stress corrosion cracking (SCC) of a severely sensitized (175 ℃/100 h) AA5083 alloy. Increasing the reversion temperature gradually enhances the corrosion resistance by dissolving the β′-Al3Mg2 phase, with the optimal treatment identified as 280 ℃/1 h. The βˊ phase maintains its planar film shape and continuously covers the grain boundaries after reversion treatment below 240 °C, but spheroidizes at the triple junctions at 260 °C. The morphology of the βˊ phase is dictated by grain boundary diffusion and interface diffusion. Reversion treatments improve SCC resistance by dissolving the β′ phase and reducing yield strength, attributed to anodic dissolution and hydrogen embrittlement mechanisms. This research offers valuable insights into the practical benefits of reversion treatments for Al-Mg alloy marine applications, addressing safety concerns related to sensitization.

Impact of dimensionality on the magnetocaloric effect in two-dimensional magnets

Magnetocaloric materials, which exploit reversible temperature changes induced by magnetic field variations, are promising for advancing energy-efficient cooling technologies. The potential integration of two-dimensional materials into magnetocaloric systems represents an emerging opportunity to enhance the magnetocaloric cooling efficiency. In this study, we use atomistic spin dynamics simulations based on first-principles parameters to systematically evaluate how magnetocaloric properties transition from three-dimensional (3D) to two-dimensional (2D) ferromagnetic materials. We find that 2D features such as reduced Curie temperature, sharper magnetic transition, and higher magnetic susceptibility are beneficial for magnetocaloric applications, while the relatively higher lattice heat capacity in 2D can compromise achievable adiabatic temperature changes. We further propose GdSi2 as a promising 2D magnetocaloric material. Our calculation predicts that GdSi2 exhibits an isothermal entropy change ΔSM of 22.5 J kg−1 K−1 and an adiabatic temperature change ΔTad of 6.2 K, near the hydrogen liquefaction temperature (TC≈25 K). Our analysis offers valuable theoretical insights into the magnetocaloric effect in 2D ferromagnets and demonstrates that 2D ferromagnets hold promise for cooling and thermal management applications in compact and miniaturized nanodevices.

Unlocking the power of LiOH: Key to next-generation ultra-compact thermal energy storage systems

This study explores the potential of untapped lithium hydroxide (LiOH) as a phase change material for thermal energy storage. By overcoming the challenges associated with the liquid LiOH leakage, we successfully thermal-cycled LiOH in a laboratory scale experimentation, and observed its stability (>500 thermal cycles), without chemical decomposition. This step has never been performed to date. Its solid-to-liquid reversible transitions temperatures and related solidification/melting enthalpies values have been verified. Then, the first experimental characterization of LiOH's thermal properties shows unexpected values for its heat capacity, thermal conductivity and diffusivity, in contradiction with the few ones available in literature. This opens avenues for LiOH's applications for the storage of sensible and latent heat, as shown through the increased cycle efficiency potential of a thermal energy storage system if based on its energy storage capacity; up to six times more volumetric energy density compared to traditional Solar Salt-based systems used in the solar tower plant (4.5 GJ/m3 vs. 0.76 GJ/m3 over 1000 thermal cycles). Additionally, we observed a softening phenomenon that occurs inconsistently during heating, but which may account for its excellent melting properties and the interplay with other raw chemicals. This new insight contributes certainly to the underlying mechanisms in the synthesis of another promising heat storage material in development: the peritectic compound Li4Br(OH)3. This pioneering work suggests LiOH as a promising ultra-compact thermal energy storage material for filling the intermediary gap from current to next-generation solar power plants, although its large-scale application requires further investigation to achieve economic viability.

Investigation of the rheological behaviour for improved extrusion-based additive manufacturing of polymer composites based on dissociative dynamic covalent bonds

More complex 3D structures were manufactured out of reversible covalent polymer networks using multi-material extrusion-based additive manufacturing. The rheological behaviour of reversible polymer networks based on the thermoreversible Diels-Alder reaction was optimized through the addition of different types of nanoclays and carbon black. The extrudability and deposition of the composites improved up to 5 wt% nanoclay, as the viscosity behaviour increased by an order of magnitude in the nozzle and by two orders of magnitude at the print bed temperature, without affecting the reversible gel transition temperature and the healing performance. An electrically conductive composite with 20 wt% carbon black and 1 wt% nanoclay could be printed using nozzle sizes down to 0.3 mm, resulting in higher resolution and accuracy than the pristine polymer networks. The percolating filler network enabled the printing of overhangs and hollow structures without the need for support material with perfect mechanical and electrical isotropy. Multi-material printing combining the electrically conductive and non-conductive composites enabled manufacturing self-healing deformation and force sensors that could recover their sensing performance upon damage healing at 90 °C for one hour.

Temperature-Dependent Luminescence of Nd3+-Doped Carbon Nanodots for Nanothermometry.

Noncontact optical nanothermometers operating within the biological transparency windows are required to study temperature-sensitive biological phenomena at the nanoscale. Nanoparticles containing rare-earth ions such as Nd3+ have been reported to be efficient luminescence-based ratiometric thermometers, however often limited by poor water solubility and concentration-related quenching effects. Herein, we introduce a new type of nanothermometer, obtained by employing low-dimensional carbon nanodots (CNDs) as matrices to host Nd3+ ions (NdCNDs). By means of a one-pot procedure, small (∼7-12 nm), water-soluble nanoparticles were obtained, with high (15 wt %) Nd3+ loading. This stable metal-CND system features temperature-dependent photoluminescence in the second biological window (BW II) upon irradiation at 808 nm, thereby allowing accurate and reversible (heating/cooling) temperature measurements with good sensitivity and thermal resolution. The system possesses remarkable biocompatibility in vitro and promising performance at a high penetration depth in tissue models.

Transformation Behaviors and Microstructure Modifications in Hydrogen-Charged Ti–Ni Shape Memory Alloy

AbstractThe effect of hydrogen charging duration on the transformation behavior, microstructural evolution, and dynamic microstructural changes associated with thermoelastic martensitic transformation in Ti–Ni shape memory alloy was investigated. Compared with the uncharged specimen, the martensitic transformation start (Ms) and reverse transformation finish (Af) temperatures increased with charging time, whereas the martensitic transformation finish and reverse transformation start temperatures remained almost unchanged. In situ SEM results were consistent with these behaviors. Upon cooling, the transformation progressed from the center to the surface in charged specimens, indicating a higher transformation temperature in the center than the surface. The latent heat of transformation decreased with increasing charging time, quantitatively attributed to an untransformed region consisting of hydrogen-induced martensite and a hydrogen-affected layer. The hydrostatic effect from those layers on the interior B2 phase was proposed as the origin of the increased Ms and Af temperatures.

Upcycled Graphene Oxide Nanosheets for Reversible Room Temperature NO2 Gas Sensor

Graphene oxide (GO) nanosheets, as one of the most studied graphene derivatives, have demonstrated an intrinsically strong physisorption-based gas–matter behavior, owing to its enhanced volume–surface ratio and abundant surface functional groups. The exploration of efficient and cost-effective synthesis methods for GO is an ongoing task. In this work, we explored a novel approach to upcycle inexpensive polyethylene terephthalate (PET) plastic waste into high-quality GO using a combination of chemical and thermal treatments based on a montmorillonite template. The obtained material had a nanosheet morphology with a lateral dimension of around ~2 µm and a thickness of ~3 nm. In addition, the GO nanosheets were found to be a p-type semiconductor with a bandgap of 2.41 eV and was subsequently realized as a gas sensor. As a result, the GO sensor exhibited a fully reversible sensing response towards ultra-low-concentration NO2 gas with a limit of detection of ~1.43 ppb, without the implementation of an external excitation stimulus including elevating the operating temperature or bias voltages. When given a thorough test, the sensor maintained an impressive long-term stability and repeatability with little performance degradation after 5 days of experiments. The response factor was estimated to be ~11% when exposed to 1026 ppb NO2, which is at least one order of magnitude higher than that of other commonly seen gas species including CH4, H2, and CO2.

Preparation method of reversible temperature indicating patch for temperature self-detection of power equipment and its properties

Abstract The problem of thermally induced defects in power equipment is prominent, affecting the safe and stable operation of the power grid. To detect abnormal heating in time, a reversible temperature-indicating patch measurement for temperature self-detection of power equipment is proposed, and its performance is analyzed and studied. The results show that the reversible thermochromic patch prepared with heat-sensitive red as the hidden colorant, dodecyl gallate as the color rendering agent, and tetradecane as the solvent has the color change characteristic of “light color at low temperature and deep color at high temperature”, and its color-changing temperature interval is 42°C ∼ 52°C. The color-changing performance of the materials with different quality ratios is different, from which the optimal ratio of the color-changing materials is selected as thermochromic red: lauryl gallate: tetradecanol=1:7:30. To facilitate the application of the color-changing materials on-site, the color-changing materials are encapsulated by melt adsorption sealing technology, and the temperature indicating patches with good color-changing reversibility are prepared. The research results can provide a reference for the field application of reversible color-changing materials for temperature self-detection of power equipment.

The impact of aerosols as ice nucleating particle on microphysics and electrification in the cumulus model

Here, a heterogeneous ice nucleation parameterization associated with aerosol acting as ice nucleating particle (INP) was implanted into a two-dimensional numerical cumulus model. To explore the impact of INP on microphysical and electrical processes, a comparison was conducted with the original approach, which employs an empirical formula. Simulation results indicate that INP greatly impacted microphysical evolution in the heterogeneous ice nucleation process, reducing total liquid precipitation amounts and causing a slight precipitation delay, as well as increasing the diameter and mixing ratio of ice crystals and the expansion of the vertical distribution of ice crystals. This led to a notable change in electrification in thunderstorms. The increase of ice crystal diameter was the dominant contributor to the enhancement of electrification using the new parameterization. Additionally, unlike the structure of thunderclouds in a mature stage, which always retains a normal dipole structure adopting the empirical formula, a tripole structure developed a lower positive charge, and the polarity inversion with upper negative and lower positive charges occurred when the new parameterization was adopted. This predominately was the result of abundant ice crystals present below the reversal temperature. The electrification characteristics of thunderstorms may have a close connection with lightning activity. It has been found that charge structure changed significantly in the two cases, with the tripolar charge structure facilitating the production of inverted intra-cloud (IC) flashes and negative Cloud-to-ground (CG) flashes simulated by the new parameterization; additionally, clouds simulated using the empirical formula may be able to develop normal IC lightning and positive CG flashes. Therefore, it will be very meaningful to obtain greater insight into the characteristics of thunderstorms electrification in cumulus model with aerosols.

Establishment of a reverse transcription-recombinase polymerase amplification-lateral flow dipstick method for the dual detection of Israeli acute paralysis virus and chronic bee paralysis virus.

As an important social insect, honey bees play crucial roles in agricultural production, sustainable development of agricultural production, and the balance of the natural environment. However, in recent years, Israeli acute paralysis virus (IAPV) and chronic bee paralysis virus (CBPV), the main pathogens of bee paralysis, have continuously harmed bee colonies and caused certain losses to the beekeeping industry. Some beekeeping farms are located in wild or remote mountainous areas, and samples from these farms cannot be sent to the laboratory for testing in a timely manner, thereby limiting the accurate and rapid diagnosis of the disease. In this study, we used a reverse transcription-recombinase polymerase amplification-lateral flow dipstick (RT-RPA-LFD) method for the dual detection of IAPV and CBPV. RPA primers and LFD detection probes were designed separately for their conserved genes. Primers and probes were screened, and the forward and reverse primer ratios, reaction times, and temperatures were optimized. According to the results of the optimization tests, the optimal reaction temperature for RT-RPA is 37°C, and when combined with LFD, detection with the naked eye requires <20 min. The developed RPA-LFD method specifically targets IAPV and CBPV and has no cross-reactivity with other common bee viruses. In addition, the minimum detection limit of the RT-RPA-LFD method is 101 copies/μL. Based this study, this method is suitable for the detection of clinical samples and can be used for field detection of IAPV and CBPV.

Recess-free thin-barrier AlGaN/GaN Schottky barrier diodes with ultra-low leakage current: Experiment and simulation study

In GaN Schottky barrier diodes (SBD), there is a trade-off between the turn-on voltage and the leakage current. In this study, recess-free 4 nm-thin-barrier AlGaN/GaN SBDs with minimal leakage current as well as excellent turn-on voltage homogeneity are developed, which enable better electrical control to pinch off the 2DEG channel under the anode region and avoids trap introduced in the barrier etching process. In detail, the effect of reverse stress on the SBD performance is initially explored by using differential conductance, and then, the anode-to-cathode distances and temperatures dependence of SBDs output characteristics are systematically studied. The fabricated thin-barrier GaN SBDs show a turn-on voltage of ∼0.75 V and a low level leakage current of 9.66 × 10−10 (1.91 × 10−8) A/mm at 300 (423) K, which is among the lowest reported values at the comparable reverse bias voltage and temperature. Moreover, structure parameters of the thin-barrier AlGaN/GaN SBD are systematically modeled and optimized by the TCAD simulations, including anode metal work function, Al mole fraction, the anode-to-cathode distance, and slanted anode angle. The introduction of slanted anode is found to have significant effect on the improvement of reverse breakdown voltage and leakage current characteristics.

High energy-storage density and giant negative electrocaloric effect in PLZS antiferroelectric thick film ceramics prepared via the tape-casting process

Antiferroelectric materials are highly desired for high energy-storage density capacitors and electrocaloric refrigerator in the future due to their excellent energy storage properties and giant negative electrocaloric effect, which have attracted great attention in recent years. In the present work, a highly recoverable energy density (Wrec) and a large reversible adiabatic temperature change (ΔT) were obtained simultaneously in PLZS thick film ceramics (TFCs). A maximum Wrec of 9.84 J·cm−3 with an efficiency of 85.2 % at 440 kV·cm−1, and a negative ΔT of −9.50 °C at 280 kV·cm−1 were obtained. Moreover, the maximum value of electrocaloric strength of 0.98 K·m·MV−1 was achieved for Pb0.97La0.02(Zr0.50Sn0.50)O3 TFCs. These results demonstrate that the PLZS TFCs can be applied potentially for high energy-storage density capacitors and refrigerators.