Copper Resistance Research Articles

Elucidating the Mode of Action of Hybrid Nanoparticles of Cu/Zn Against Copper-Tolerant Xanthomonas euvesicatoria.

The widespread presence of tolerance to copper in Xanthomonas species has resulted in the need to develop alternative approaches to control plant diseases caused by xanthomonads. In recent years, nanotechnological approaches have resulted in the identification of novel materials to control plant pathogens. With many metal-based nanomaterials having shown promise for disease control, an important question relates to the mode of action of these new materials. In this study, we used several approaches, such as scanning electron microscopy, propidium monoazide quantitative polymerase chain reaction, epifluorescence microscopy, and RNA sequencing to elucidate the mode of action of a Cu/Zn hybrid nanoparticle against copper-tolerant strains of Xanthomonas euvesicatoria. We demonstrate that Cu/Zn did not activate copper resistance genes (i.e., copA and copB) in the copper-tolerant bacterium but functioned by disrupting the bacterial cell structure and perturbing important biological processes such as cell respiration and chemical homeostasis.

EVALUATION OF BIOSURFACTANT PRODUCING AND ANTIMICROBIAL RESISTANCE PSEUDOMONAS FOR HEAVY METALS TOLERANCE

This study aimed to evaluate biosurfactant production and antibiotic resistance in Pseudomonas bacteria isolated from some agricultural fields to detect the relationship of these isolates traits with some heavy metals resistance. Bacterial isolates were screened for biosurfactant production through blood hemolysis, oil spreading, emulsification activity, and surface tension. The antibiotic sensitivity was determined using disk diffusion method. Then, identification of the selected isolates and subjected to gradient concentrations of heavy metals to determine the minimum inhibitory concentration (MIC). Biosurfactant production was found in 74.29% of these isolates. The isolates resistance to Ticarcillin-clavulanate, Aztreonam, Piperacillin, and Imipenem were 92.86%, 31.43%, 2.86% and 1.43%, respectively. The eight selected isolates were identified by biochemical tests and VITEK 2 system as P. aeruginosa. The resistance of these isolates to heavy metals differed significantly. The isolate B49 recorded the highest resistance to Cu (MIC=3200 µg/ml) and Zn (MIC=2600 µg/ml), while the isolate B66 recorded the highest resistance to Cd (MIC=1000 µg/ml) and isolate B25 had higher resistance to Hg (MIC=80 µg/ml), and Pb (MIC=2800 µg/ml). The correlation coefficient between emulsification (E24%) and CdCl2 (r=0.27) and Pb (r=0.38) was significant positive, while E24% had a significant negative correlation with Zn (r= -0.63) and non-significant correlation to copper (r=0.02) and mercury (r=0.19) resistance.

Comprehensive survey of copper resistance and analysis of responsible genes in Pseudomonas syringae pv. actinidiae biovar 1 and biovar 3 isolates from Japan

Comprehensive survey of copper resistance and analysis of responsible genes in Pseudomonas syringae pv. actinidiae biovar 1 and biovar 3 isolates from Japan

Gene expression variation underlying tissue-specific responses to copper stress in Drosophila melanogaster.

Copper is one of a handful of biologically necessary heavy metals that is also a common environmental pollutant. Under normal conditions, copper ions are required for many key physiological processes. However, in excess, copper results in cell and tissue damage ranging in severity from temporary injury to permanent neurological damage. Because of its biological relevance, and because many conserved copper-responsive genes respond to nonessential heavy metal pollutants, copper resistance in Drosophila melanogaster is a useful model system with which to investigate the genetic control of the heavy metal stress response. Because heavy metal toxicity has the potential to differently impact specific tissues, we genetically characterized the control of the gene expression response to copper stress in a tissue-specific manner in this study. We assessed the copper stress response in head and gut tissue of 96 inbred strains from the Drosophila Synthetic Population Resource using a combination of differential expression analysis and expression quantitative trait locus mapping. Differential expression analysis revealed clear patterns of tissue-specific expression. Tissue and treatment specific responses to copper stress were also detected using expression quantitative trait locus mapping. Expression quantitative trait locus associated with MtnA, Mdr49, Mdr50, and Sod3 exhibited both genotype-by-tissue and genotype-by-treatment effects on gene expression under copper stress, illuminating tissue- and treatment-specific patterns of gene expression control. Together, our data build a nuanced description of the roles and interactions between allelic and expression variation in copper-responsive genes, provide valuable insight into the genomic architecture of susceptibility to metal toxicity, and highlight candidate genes for future functional characterization.

Aluminum Co-Deposition via DC Magnetron Sputtering for Enhanced Pitting Resistance of Copper–Nickel Alloys

To investigate the improvements in the resistance of Cu–Ni alloys to surface pitting corrosion, Cu–Ni thin films containing Al were fabricated via DC magnetron sputtering. The morphologies of the fabricated samples were obtained using a scanning electron microscopy, which yielded information on the crystal size and sample surface before and after corrosion tests. X-ray diffraction was employed for the structural characterization of the as-deposited films, and vibrational spectroscopy was used to verify the corrosion products. The corrosion behaviors of the Cu–Ni and Cu–Ni–Al samples were examined using electrochemical polarization and cyclic corrosion tests. The Al co-deposited samples showed a refined crystal size as compared to the Cu–Ni sample, suggesting that they are more susceptible to the formation of a passivation film. The corrosion current density of the Cu–Ni–Al was reduced, and the corrosion potential was lower than that without Al content. The negative shift in the corrosion potential of the Al-containing samples indicates that the Al2O3 film suppressed the cathodic reaction, resulting in a decrease in the corrosion rate. These results are consistent with the cyclic corrosion test results, in which no pitting corrosion is observed in the Cu–Ni–Al sample.

Effect of the grain boundary character distribution on the sulfur corrosion behaviour and mechanisms of copper windings under different high temperatures

AbstractAs a typical failure phenomenon in transformers, sulfur corrosion has garnered significant attention in the field of high‐voltage engineering. Grain boundary character distribution (GBCD) copper windings have been introduced to enhance sulfur corrosion resistance by slowing down intergranular corrosion. In this study, the sulfur corrosion behaviour and mechanisms of the GBCD copper windings under various temperatures were experimentally and theoretically studied. Results show that GBCD can enhance the corrosion resistance of copper in liquid environments. With the increase in temperatures, the insulating properties of oil and papers in traditional copper windings experience notable degradation, while GBCD copper windings show more stable insulating behaviours. In addition, modelling of grain boundary energy indicates that the grain boundary structure of GBCD copper windings has a lower average interface energy of 0.170 eV/Å2. Calculations of reaction thermodynamics show that GBCD copper windings possess a higher failure temperature (135.2°C) and inhibition degree (activation energy) of the sulfur corrosion (32,557.62 J/mol), revealing the stability and enhanced sulfur corrosion resistance at elevated temperatures.

3,4-Dimethoxy phenyl thiosemicarbazone as an effective corrosion inhibitor of copper under acidic solution: comprehensive experimental, characterization and theoretical investigations.

This study investigates the corrosion inhibition potential of 3,4-dimethoxy phenyl thiosemicarbazone (DMPTS) for copper in 1 M hydrochloric acid (HCl) solutions, aiming to disclose the mechanism behind its protective action. Through an integrative methodology encompassing electrochemical analyses-such as weight loss measurements, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS)-we quantitatively evaluate the corrosion protection efficacy of DMPTS. It was determined that the optimal concentration of DMPTS markedly boosts the corrosion resistance of copper, achieving an impressive inhibition efficiency of up to 89% at 400 ppm. The formation of a protective layer on the copper surface, a critical aspect of DMPTS's inhibitory action, was characterized using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). These techniques provided empirical evidence of surface morphology modifications and roughness changes, affirming the formation of a protective barrier against corrosion. A significant advancement in our study was the application of Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy, which identified chemical adsorption as the definitive mechanism of corrosion inhibition by DMPTS. The ATR-FTIR results explicitly demonstrated the specific interactions between DMPTS molecules and the copper surface, indicative of a robust protective adsorbed layer formation. This mechanistic insight, crucial to understanding the inhibitory process, aligns with the protective efficacy observed in electrochemical and surface analyses. Theoretical support, provided by the Quantum Theory of Atoms in Molecules (QTAIM) and quantum chemical computations, further validated the strong molecular interaction between DMPTS and copper, corroborating the experimental findings. Collectively, this research not only confirms the superior corrosion inhibition performance of DMPTS in an acidic setting but also elucidates the chemical adsorption mechanism as the foundation of its action, offering valuable insights for the development of effective corrosion inhibitors in industrial applications.

Copper-Induced InVivo Gene Amplification in Budding Yeast.

In the biotechnological industry, multicopy gene integration represents an effective strategy to maintain a high-level production of recombinant proteins and to assemble multigene biochemical pathways. In this study, we developed copper-induced invivo gene amplification in budding yeast for multicopy gene expressions. To make copper as an effective selection pressure, we first constructed a copper-sensitive yeast strain by deleting the CUP1 gene encoding a small metallothionein-like protein for copper resistance. Subsequently, the reporter gene fused with a proline-glutamate-serine-threonine-destabilized CUP1 was integrated at the δ sites of retrotransposon (Ty) elements to counter the copper toxicity at 100 μM Cu2+. We further demonstrated the feasibility of modulating chromosomal rearrangements for increased protein expression under higher copper concentrations. In addition, we also demonstrated a simplified design of integrating the expression cassette at the CUP1 locus to achieve tandem duplication under high concentrations of copper. Taken together, we envision that this method of copper-induced invivo gene amplification would serve as a robust and useful method for protein overproduction and metabolic engineering applications in budding yeast.

The Electrical and Mechanical Aspects of Aluminum and Copper Resistance Spot Weld Joints

The Electrical and Mechanical Aspects of Aluminum and Copper Resistance Spot Weld Joints

Phylogenomic analysis of 343 Xanthomonas citri pv. citri strains unravels introduction history and dispersal paths.

Xanthomonas citri pv. citri (Xcc) causes the devastating citrus canker disease. Xcc is known to have been introduced into Florida, USA in at least three different events in 1915, 1986 and 1995 with the first two claimed to be eradicated. It was questioned whether the Xcc introduction in 1986 has been successfully eradicated. Furthermore, it is unknown how Xcc has spread throughout the citrus groves in Florida. In this study, we investigated the population structure of Xcc to address these questions. We sequenced the whole genome of 343 Xcc strains collected from Florida groves between 1997 and 2016. Our analysis revealed two distinct clusters of Xcc. Our data strongly indicate that the claimed eradication of the 1986 Xcc introduction was not successful and Xcc strains from 1986 introduction were present in samples from at least 8 counties collected after 1994. Importantly, our data revealed that the Cluster 2 strains, which are present in all 20 citrus-producing counties sampled in Florida, originated from the Xcc introduction event in the Miami area in 1995. Our data suggest that Polk County is the epicenter of the dispersal of Cluster 2 Xcc strains, which is consistent with the fact that three major hurricanes passed through Polk County in 2004. As copper-based products have been extensively used to control citrus canker, we also investigated whether Xcc strains have developed resistance to copper. Notably, none of the 343 strains contained known copper resistance genes. Twenty randomly selected Xcc strains displayed sensitivity to copper. Overall, this study provides valuable insights into the introduction, eradication, spread, and copper resistance of Xcc in Florida.

Corrosion Behavior of Ni/NiCr/NiCrAlSi Composite Coating on Copper for Application as a Heat Exchanger in Sea Water.

This study introduces a novel Ni/NiCr/NiCrAlSi composite coating to enhance the corrosion resistance of copper, particularly for its use in marine heat exchangers. Utilizing characterization techniques such as scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS), the paper investigates the coating's composition, structure, and corrosion resistance in 3.5 wt.% NaCl aqueous solutions. A significant focus is placed on the role of aluminum within the NiCrAlSi layer, examining its influence on the coating's structure and corrosion behavior. The results indicate that the NiCrAlSi layer with an aluminum content of 5.49 at.% exhibits the most improved corrosion resistance, characterized by the highest corrosion potential and a corrosion current density that is more than one order of magnitude lower compared to the Ni/NiCr coating. The effectiveness of this composite coating is attributed to its multilayer structure and the synergistic effect of alloying elements Cr, Al, and Si, which collectively inhibit corrosive medium penetration. These insights present the Ni/NiCr/NiCrAlSi coating as a promising candidate for copper protection in sea water environments, merging enhanced durability with cost-effectiveness.

Wear resistance mechanism of graphene/copper composite foils with bimodal structure

Copper foils have a wide range of applications in modern industry. However, their wider utilization is restricted by the poor wear resistance of pure copper. Therefore, improving the abrasion resistance of copper foils is essential for their application in various scenarios. In this study, controlling the parameters of pulsed electrodeposition and incorporating graphene, pure copper foil, and graphene/copper (Gr/Cu) composite foil with distinct microstructures were successfully prepared. Gr/Cu composite foil with bimodal structures exhibits excellent wear resistance, with a coefficient of friction (COF) 0.2 lower than pure Cu foil and a wear rate of only 61.4% of pure Cu foil. We investigated the effects of bimodal structure and graphene on the wear resistance mechanism of Gr/Cu composite foil. The presence of ultrafine grains (UFG), fine grains (FG), and coarse grains (CG) in the bimodal structure enhances the wear resistance of the Gr/Cu composite foil, by resisting crack initiation and propagation. In addition, graphene provides lubrication, and stress dispersion and prevents abrasive particles from entering the foil surface, thus preventing delamination and spalling, which further improves wear resistance. This research demonstrates the potential synergistic effect of bimodal structures and graphene to improve the wear resistance of copper foils, which is promising to provide more durable solutions for a wide range of industries.

Asperity contact analysis: coupling effects of normal interference and nanoscale offset by molecular dynamics simulations

This work investigates the offset contact behaviors of nanosized asperity with spherical and non-spherical shapes, aiming to provide a more realistic analysis of asperity contact for rough surfaces. Molecular dynamics models of nanosized asperity are established, using diamond and copper as exemplary materials. Differences between offset and non-offset contacts, as well as spherical and non-spherical asperities are compared through atomic variations including displacement, shear strain and structure. Coupling effects of normal interference and nanoscale offset on asperity contact behaviors are further analyzed. Comparisons between the established models and the microscopic asperity models in contact force-interference dependence are conducted for verification. Results indicate that atoms in central contact region move vertically with smaller shear strains, while those in peripheral region primarily move diagonally outward with larger shear strains due to directional atomic slip motion. Furthermore, the spherical asperity shows higher atomic deformation and contact force compared to the non-spherical asperity for identical interference and offset conditions. Additionally, the shear resistance of single-crystal copper with {100} crystal orientation can be enhanced along the [1 1 0] and [1 − 1 0] directions.

Evaluation of Relationship between Copper and Insulin Resistance by Hyperinsulinemic Clamp.

Evaluation of Relationship between Copper and Insulin Resistance by Hyperinsulinemic Clamp.

Coordination driven vanadium/L-cysteine hybrid conversion film to improve the corrosion resistance of copper

Vanadium/L-cysteine (V/L-cys) hybrid films with favorable anti-corrosion performance were fabricated on copper substrate based on the coordination between Vanadium and L-cys. The characteristic adsorption of sulfhydryl groups (-SH) in L-cys on copper acts as a bridge for film formation, while the coordination between VO2+ ions and –COOH or NH2 in L-cys repairs defects and enhances the density of film. The EIS results indicated that the corrosion protection efficiency of V/L-cys film was 99.6 %, which was much higher than that of single L-cys film (91.1 %). Moreover, the immersion test exhibited that V/L-cys film was capable of enduring 300 min of immersion in a 3.5 % NaCl solution, whereas L-cys film could only withstand 60 min of immersion. The durability of V/L-cys film showed a significantly higher level than that of L-cys film.

Thermal Contact Resistance of the Copper–Copper Pair with Graphene Thermal Interface in Magnetic Fields up to 10 T

Abstract—
 The thermal contact resistance of a detachable connection in copper-copper contact pair with a thermal interface from layers of graphene synthesized by the method of a low pressure chemical vapor deposi-tion on the contact surface was studied. Obtaining the value of the thermal contact resistance of a detachable contact pair copper–graphene–copper by the method of transient heat flow, at a temperature of 15–150 K under the influence of an external magnetic field up to 10 T.

Copper reduces the virulence of bacterial communities at environmentally relevant concentrations

Increasing environmental concentrations of metals as a result of anthropogenic pollution are significantly changing many microbial communities. While there is evidence metal pollution can result in increased antibiotic resistance, the effects of metal pollution on the virulence of bacterial communities remains largely undetermined. Here, we experimentally test whether metal stress alters the virulence of bacterial communities. We do this by incubating three wastewater influent communities under different environmentally relevant copper concentrations for three days. We then quantify the virulence of the community phenotypically using the Galleria mellonella infection model, and test if differences are due to changes in the rate of biomass accumulation (productivity), copper resistance, or community composition (quantified using 16S amplicon sequencing). The virulence of the communities was found to be reduced by the highest copper concentration, but not to be affected by the lower concentration. As well as reduced virulence, communities exposed to the highest copper concentration were less diverse and had lower productivity. This work highlights that metal pollution may decrease virulence in bacterial communities, but at a cost to diversity and productivity.

Corrosion resistance and mechanism of (100), (110) and (111) preferred orientation of single crystal copper in NaCl solution

In present work, the immersion and electrochemical corrosion resistance of single-crystal copper with (100), (110), (111) preferred orientation were studied in 3.5 NaCl solution. The scanning electron microscopy and X-ray photoelectron spectroscopy, Laser Raman spectroscopy were used to observe corroded surface morphology and analyze the corroded products. The experimental results show that preferential orientation has a significant effect on the corrosion resistance of single crystal copper. The self-corrosion current densities of (100), (110), and (111) oriented single-crystal copper were 1.1455 μA/cm2,0.7312 μA/cm2 and 1.4117 μA/cm2 respectively. The corrosion resistance was in the order of (110) > (100) >(111). Optimally oriented surface can effectively improve the corrosion resistance of copper.

Phenotypic and resistome analysis of antibiotic and heavy metal resistance in the Antarctic bacterium Pseudomonas sp. AU10.

Resistance to antibiotics and heavy metals in Antarctic bacteria has been investigated due to anthropogenic impact on the continent. However, there is still much to learn about the genetic determinants of resistance in native bacteria. In this study, we investigated antibiotic, heavy metal, and metalloid resistance in Pseudomonas sp. AU10, isolated from King George Island (Antarctica), and analyzed its genome to look for all the associated genetic determinants (resistome). We found that AU10 displayed resistance to Cr(VI), Cu(II), Mn(II), Fe(II), and As(V), and produced an exopolysaccharide with high Cr(VI)-biosorption capacity. Additionaly, the strain showed resistance to aminopenicillins, cefotaxime, aztreonam, azithromycin, and intermediate resistance to chloramphenicol. Regarding the resistome, we did not find resistance genes in AU10's natural plasmid or in a prophage context. Only a copper resistance cluster indicated possible horizontal acquisition. The mechanisms of resistance found were mostly efflux systems, several sequestering proteins, and a few enzymes, such as an AmpC β-lactamase or a chromate reductase, which would account for the observed phenotypic profile. In contrast, the presence of a few gene clusters, including the terZABCDE operon for tellurite resistance, did not correlate with the expected phenotype. Despite the observed resistance to multiple antibiotics and heavy metals, the lack of resistance genes within evident mobile genetic elements is suggestive of the preserved nature of AU10's Antarctic habitat. As Pseudomonas species are good bioindicators of human impact in Antarctic environments, we consider that our results could help refine surveillance studies based on monitoring resistances and associated resistomes in these populations.

Bakteri Indigen yang Diisolasi dari Danau Toba: Acinetobacter junii DT2.1 Multiresisten Tembaga, Methylen Blue, dan Basic Fuchine

Lake Toba is one of the industrial waste disposal sites around the location. Copper and dyes are pollutants that are toxic and harmful to organisms. Bioremediation using indigenous bacteria isolated from polluted sites is a promising solution to overcome environmental pollution. Bacteria that have multi-resistance to copper and dyes are expected to increase the efficiency of industrial waste treatment. This study aims to: 1) isolate and characterize copper-resistant bacteria, 2) determine the level of resistance of bacterial isolates to copper, 3) test the resistance of bacteria to dyes. Physiological characterization of bacterial isolates was carried out by observing colony and cell morphology, also Gram staining. Molecular characterization was carried out by analysis of the 16S rDNA gene. The copper resistance level was tested by determining the Minimum Inhibitory Concentration MIC value. The dye resistance test was carried out by growing bacteria on a medium containing 100 ppm of dye. There were eight isolates of copper-resistant bacteria with MIC values ranging from 3-7 mM CuSO4 with code as DT1.1; DT1.2; DT1.3; DT1.4; DT1.5; DT2.1; DT2.2; and DT3.1. The three highly resistant bacteria were strains DT1.1 and DT1.3 which were identified as Lysinibacillus macroides and strain DT2.1 was identified as Acinetobacter junii with an MIC value of 7mM CuSO4, respectively. The results of the resistance test to dyes showed that only A. junii strain DT2.1 was resistant to 100 ppm Methylene Blue and Basic Fuschine. Key words: indigenous bacteria; Lake Toba; multi-resistence; dye; copper.