Protection Requirements Research Articles

A Multi-Objective Scheduling Strategy for a Hybrid Energy System for Antarctic Coastal Research Stations

A large number of research stations have been established to provide members of Antarctic expeditions with logistical support. A previous study confirmed that the wind and solar energy resources of the Chinese Zhongshan Station, a coastal station located in an area of Lassmann Hills in East Antarctica, are highly synergetic and complementary. Considering the demand for a renewable energy power supply in Zhongshan Station, this paper introduces a hybrid energy system with wind–solar–diesel–battery co-generation used as a power supply scheme. Based on the 2015 climate data for Zhongshan Station, the wind–solar resources, conventional energy system, and annual diesel consumption of the station area were analyzed. The annual electrical load demand of each building in the station area was quantitatively expounded. Compared with the original power supply system, and combined with the analysis results of the thermal load and electrical load demands of the station, an objective function based on the requirements of economy, reliability, and environmental protection was presented. According to the constraint conditions of the heat energy and electrical energy load balance in the station area, a multi-objective scheduling strategy for the system was designed. Finally, the effects of this scheduling strategy were analyzed under three different application scenarios. The results indicated that the annual load demand was significantly lower than before the scheduling, and that a 50% reduction in diesel consumption could be achieved, demonstrating that the multi-objective scheduling strategy proposed in this paper could achieve optimal energy scheduling and management of the renewable hybrid energy system.

Physical and mechanical properties of deflection-hardening hybrid fibre-reinforced recycled aggregate concrete

Recycled aggregate concrete (RAC) has been gaining a large interest in recent years due to the depletion of natural aggregates and environmental protection requirements. To improve the ductility of RAC for structural applications and to avoid corrosion risks involved with utilising steel fibres, this study proposes a deflection-hardening hybrid fibre-reinforced recycled aggregate concrete (FRRAC) by combining newly developed macro-basalt fibre (BF, 0.67 % by volume) and recycled macro-polypropylene fibre (PF, 0.67 % by volume). Its fresh, static and dynamic mechanical properties were investigated and compared with the mix containing macro-BF only (1.34 % by volume). A Ø 100 mm split Hopkinson pressure bar (SHPB) system was used to determine the dynamic mechanical properties in compression and tension. The hybrid FRRAC retained up to 90 % of its average first peak load at 3.5 mm crack width and showed better cracking bridging performance under dynamic splitting tension than the specimens with the same volume of macro-BF. Empirical formulae for dynamic increase factors and energy absorption capacities against varying strain rates have also been proposed for the newly developed hybrid FRRAC.

Study on Thermodynamic Coupling Performance of Multi-Level Lattice Structures

With the development of hypersonic vehicle, the design of heat-resistant and load-bearing surface of hypersonic vehicle has gradually become a key technology affecting its combat effectiveness. As a new type of lightweight and high-strength structure, lattice structure has excellent mechanical properties such as ultra-light, high specific strength and high specific stiffness, and special properties such as vibration reduction, heat dissipation and sound absorption. Among them, the multi-level lattice structure can increase the bearing efficiency of the structure at low relative density, and increase the heat transfer area at the same time, so as to improve the heat protection and bearing capacity of the structure. This study includes three aspects of high temperature out-of-plane compression test, high temperature numerical simulation comparison, and structural optimization for the designed multi-level pyramid lattice, in order to obtain the bearing capacity of the multi-level pyramid lattice at 350°C, and further improve the bearing performance by optimizing the core structure. Through experiments and verification, the multi-level pyramid lattice designed and optimized in this study can further meet the requirements of thermal protection and load-bearing performance of aircraft compared with the single-level pyramid lattice, and can provide a reference for the study of high temperature mechanical properties of lattice structures, the design of new multi-level lattice structures and the engineering application of lattice structures.

STRAIN MEASUREMENT AND ADHESIVE SELECTION FOR STRAIN GAUGES ON CARBON ROVING IN TEXTILE-REINFORCED CONCRETE STRUCTURES

Textile-reinforced concrete (TRC) is a promising building material that meets modern environmental protection and sustainability requirements. For the widespread use of this innovative building material, empirical models based on material properties determined by laboratory tests are needed. This study investigated the ability to measure the strain of carbon rovings with small strain gauges during standard tensile tests. The measured values were compared and validated using the digital image correlation (DIC) method. Another component of this study is the investigation of a suitable adhesive for the application of the sensors to SBR-coated (styrene-butadiene rubber) carbon roving. Three test series with three different adhesives, cyanoacrylate adhesive, epoxy resin, and polychloroprene, were produced and tested for tensile strength. The validation tests showed that a strain loss occurs in the adhesive joint of the strain gauges. It was found that cyanoacrylate adhesives, such as M-Bond 200, suffered the lowest losses and are recommended for further investigations. The epoxy resin influences the stiffness of the carbon fibers at the contact surface too strongly, while the polychloroprene adhesive could not transfer the actual roving strain due to insufficient stiffness of the bond line.

A standard ranking algorithm for robust iris template protection

In iris biometric recognition systems, protecting the storage and transmission of iris templates is crucial, and template protection techniques are pivotal for ensuring their security. A prevalent approach involves using indexing methods as an effective algorithm for iris template protection, leveraging the index or rank of the extracted iris code to generate a secure iris template. Meantime, many privacy threats to biometric data have emerged, necessitating heightened protection measures. Specifically, protecting the privacy of iris data is imperative within the context of iris template protection during recognition processes. As stipulated by the international standard ISO/IEC 30136, effective iris template protection must concurrently meet the criteria of irreversibility, revocability, and unlinkability. Nevertheless, existing indexing methods on iris template protection faced the formidable challenge of simultaneously fulfilling these three privacy requirements while maintaining the efficacy of iris recognition. This paper introduces a standard ranking (standardR) algorithm, named standardR, designed to enhance the security of iris templates by transforming each iris template into an irreversible representation. The experimental results on the benchmarked Casia-Iris-interval dataset, along with two additional iris datasets MMU1 and UBRIS 1, demonstrate the efficacy of the proposed algorithm. The proposed standardR algorithm achieves an equal error rate (EER) of 0.1695% and an area under the curve of 0.93011% with the Casia-Iris-Interval dataset. Furthermore, the algorithm maintains efficient recognition with a reduced iris code length of 1280 bits, a time complexity of O(n log n), and satisfies the biometric template protection (BTP) requirements in irreversibility, unlinkability, and renewability.

STRAIN MEASUREMENT AND ADHESIVE SELECTION FOR STRAIN GAUGES ON CARBON ROVING IN TEXTILE-REINFORCED CONCRETE STRUCTURES

Textile-reinforced concrete (TRC) is a promising building material that meets modern environmental protection and sustainability requirements. For the widespread use of this innovative building material, empirical models based on material properties determined by laboratory tests are needed. This study investigated the ability to measure the strain of carbon rovings with small strain gauges during standard tensile tests. The measured values were compared and validated using the digital image correlation (DIC) method. Another component of this study is the investigation of a suitable adhesive for the application of the sensors to SBR-coated (styrene-butadiene rubber) carbon roving. Three test series with three different adhesives, cyanoacrylate adhesive, epoxy resin, and polychloroprene, were produced and tested for tensile strength. The validation tests showed that a strain loss occurs in the adhesive joint of the strain gauges. It was found that cyanoacrylate adhesives, such as M-Bond 200, suffered the lowest losses and are recommended for further investigations. The epoxy resin influences the stiffness of the carbon fibers at the contact surface too strongly, while the polychloroprene adhesive could not transfer the actual roving strain due to insufficient stiffness of the bond line.

Heat exchange characteristics between u-shaped butted well and reservoir

The geothermal resources in Shandong are relatively abundant. However, due to geological conditions, the high pressure of formation water reinjection makes it difficult and costly to achieve a 1:1 ratio of formation water extraction/reinjection during geothermal resource extraction. This causes waste of formation water resources and does not meet environmental protection requirements. The U-shaped butted well heat exchanger at the bottom of the well can achieve “heat extraction without water extraction”, effectively solving the problems of difficult formation water reinjection, pipeline reservoir corrosion, and reservoir damage in Shandong. Therefore, to explore the heat exchange characteristics between the U-shaped butted well heat exchanger at the bottom of the well and the reservoir, it is necessary to study various parameters of the heat exchanger operation. To better reflect the heat transfer status between the butted well and the soil, FLUENT software was used for simulation. Through simulation, the operation diagram of the generator after the comprehensive renovation was analyzed, guiding the operation of the U-shaped butted well heat exchanger.

Highly effective MFe2O4 (M=Zn, Mg, Cu and Mn) spinel catalysts for Fischer-Tropsch synthesis

A series of spinel catalysts, including ZnFe2O4, MgFe2O4, CuFe2O4, and MnFe2O4, were prepared and applied to the Fischer-Tropsch synthesis (FTS). Zn, Mg, Cu and Mn easily form spinels with Fe. Among them, Zn and Mg can significantly maintain the spinel structure during the pretreatment and reaction, resulting in a low CO conversion. Cu and Mn are beneficial to the formation of iron carbide during the reaction, resulting in an apparent influence on FTS performance. ZnFe2O4 has little effect on the hydrocarbon distribution and the olefin/paraffin (O/P) ratio of C2–C4. MgFe2O4 exhibits low selectivity for C5+ hydrocarbons, and the selectivity of C= 2−C= 4 and the O/P ratio of C2–C4 in the product are increased due to the alkaline effect of Mg. Cu can promote the carbonization of the catalyst, so that CuFe2O4 has higher activity. Meanwhile, CuFe2O4 can significantly improve the selectivity of C5+ hydrocarbons. Moreover, Cu can promote the dissociation and activation of H2, which is beneficial to the secondary hydrogenation of olefins, thereby reducing the selectivity of C= 2−C= 4 and the O/P ratio of C2–C4. Mn promotes carbonization during the reaction, but MnFe2O4 has little effect on the chain growth of hydrocarbon. However, Mn can promote the generation of a certain amount of ɛ-Fe2C, which may explain the higher selectivity of C= 2−C= 4 and the O/P ratio of C2–C4 for MnFe2O4. All spinel catalysts exhibit low CO2 selectivity, which meets the current green environmental protection requirements.

Прецизно животновъдство: същност и приложение при едри и дребни преживни. Обзор

In the new program period 2021-2027, the strategic goal for the development of European agriculture is defined as „stimulating and sharing knowledge, innovation, digitization and promoting their use to a greater extent“. The increasing number of animals on farms, the requirements for humane treatment and environmental protection, as well as the implementation of production systems with limited use of resources require new solutions that can be found in digital technologies used throughout the livestock system. Precision livestock farming involves the use of digital technologies. It aims to improve production and reproduction, animal welfare and facilitate targeted use of resources to reduce the impact on the environment and human health by precisely controlling processes.The implementation of PLF depends on: socio-demographic factors, size of the farm, production system, specialization of the farm, type of animals, animal husbandry technology, age of the farmer, country and region, etc.

Strategic Optimization of Patient Flow and Staffing Schemes during the COVID-19 Pandemic through Operations Management in a Neonatal Intensive Care Unit.

The COVID-19 pandemic posed challenges in making time-bound hospital management decisions. The University of the Philippines -Philippine General Hospital (UP-PGH) is a tertiary COVID-19 referral center located in Manila, Philippines. The mismatch of increasing suspected or confirmed COVID-19 infected mothers with few documented cases of infected infants has caused significant patient overflow and manpower shortage in its NICU. We present an evaluated scheme for NICU bed reallocation to maximize capacity performance, staff rostering, and resource conservation, while preserving COVID-19 infection prevention and control measures. Existing process workflows translated into operational models helped create a solution that modified cohorting and testing schemes. Staffing models were transitioned to meet patient flow. Outcome measurements were obtained, and feedback was monitored during the implementation phase. The scheme evaluation demonstrated benefits in (a) achieving shorter COVID-19 subunit length of stay; (b) better occupancy rates with minimal overflows; (c) workforce shortage mitigation with increased non-COVID workforce pool; (d) reduced personal protective equipment requirements; and (e) zero true SARS-CoV-2 infections. Designed for hospital operations leaders and stakeholders, this operations process can aid in hospital policy formulation in modifying cohorting schemes to maintain quality NICU care and service during the COVID-19 pandemic.

Data sovereignty and security in network engineering: A conceptual framework for compliance

Data sovereignty and security are critical issues in network engineering, particularly in an era of increasing data breaches and regulatory scrutiny. This concept paper presents a conceptual framework for understanding and ensuring compliance with data sovereignty and security requirements in network engineering. The framework begins by defining data sovereignty and security in the context of network engineering, highlighting the importance of protecting data from unauthorized access and ensuring that it is stored and processed in compliance with applicable laws and regulations. Next, the framework explores key concepts and principles related to data sovereignty and security, such as data localization, encryption, and access control. It also discusses the role of international agreements and standards in shaping data sovereignty and security requirements. The framework then guides how organizations can implement measures to protect data sovereignty and security in their network engineering practices. This includes conducting risk assessments, implementing appropriate security controls, and ensuring compliance with relevant laws and regulations. Finally, the framework outlines future trends and challenges in data sovereignty and security, such as the impact of emerging technologies like 5G and the Internet of Things (IoT) on data protection requirements. Overall, this concept paper provides a comprehensive overview of data sovereignty and security in network engineering, offering practical guidance for organizations seeking to protect their data and comply with relevant laws and regulations.

A design model of multi-layer modified aramid fabrics against fragment simulating projectiles and full metal jacketed bullets

Soft body armor is required to meet threats of both bullets and explosion fragments in battlefield. However, designing body armor that can protect against these two types of projectiles considering both critical velocity and back face deformation (BFD) is often based on experience and extensive ballistic experiments. This paper proposes a quick design model for determining the layers of aramid fabrics modified by polyethylene (PE) to protect against fragment simulating projectiles (FSP) and full metal jacketed bullets (FMJ). Firstly, ballistic experiments are conducted discovering the optimal concentration of PE modification against the sphere and FSP is 10 %. Secondly, finite element model is adapted to explore the protection capabilities of modified aramid fabrics against FSP and FMJ and a linear relationship between the BFD and the critical velocity has been observed. Thirdly, an analytical model is established to uncover the reason of this relationship. Finally, a design model is proposed to configure the improved outer tactical vest (IOTV) generation III based on the derived formulae of critical velocity and BFD for different layers of modified aramid fabrics against FSP and FMJ. The model indicates that the objectives of intercepting FSP or FMJ and reducing blunt trauma are usually not simultaneously attainable. 38 layers of modified aramid fabrics are sufficient to meet the protection requirements for both FSP and FMJ, regardless of critical velocity and BFD. Besides, 498 m/s is the threshold of FMJ impact velocity to determine the priority of intercepting bullets or reducing blunt trauma. The design model can serve for the development of lightweight and effective body armor.

E-Commerce Participation, Subjective Norms and Grassland Utilization Pressure: An Empirical Evidence of Herdsmen in Inner Mongolia, China

The general requirements of China’s rural revitalization strategy are industrial prosperity, ecological livability and rich life. However, the traditional livestock breeding model has struggled to balance the dual requirements of production development and ecological protection, and it is urgent to inject new impetus and explore new development paths. At present, e-commerce has become a bridge between pastoral areas and cities, herdsmen and consumers. E-commerce participation is not only an important starting point for herdsmen to increase the added value and profit space of livestock products, but also an effective way to change the original breeding behavior based on the premise of destroying grassland. Therefore, this paper presents an in-depth study on the issue of e-commerce enabling grassland ecological restoration, aiming to provide more scientific and effective guidance for e-commerce to be used to achieve a win–win situation in economy and ecology. Therefore, based on the data of 271 herdsmen in pastoral areas of Inner Mongolia, we used the OLS model and the two-stage least squares (2SLS) method to identify the direct impact of herdsmen’s e-commerce participation on grassland utilization pressure. The empirical results show that e-commerce participation can significantly decrease the grassland utilization pressure. The conclusion was still valid after alleviating endogeneity and conducting a robustness test. The results of a mechanism analysis suggest that the reduction effect of e-commerce participation on grassland utilization pressure is mainly due to price incentive, reputation incentive and place identity. Subjective norms can strengthen the inhibitory effect of e-commerce participation on grassland utilization pressure. Furthermore, a heterogeneity analysis demonstrates that e-commerce participation has a better, decreased impact on the grassland utilization pressure on the banners of China’s rural e-commerce demonstration county program. Under a counterfactual assumption, if herdsmen who can participate in e-commerce choose not to do this, their grassland utilization pressure will increase.

Exploring Issues and Strategies of Rural Land Use and Environmental Protection

Land resources play a crucial role in the overall development of society, but the irrational exploitation and use of these resources have significant adverse effects on the natural ecological environment, which is detrimental to the effective construction of a harmonious society. There is an inseparable relationship between rural land use and ecological security, and in current rural land use practices, environmental protection issues are increasingly emphasized. In some rural areas, in pursuit of short-term economic benefits, the importance of environmental protection is often overlooked, leading to excessive development and use of land resources, posing a great threat to the sustainable development of rural society. The reduction of vegetation signifies a deterioration of the ecological environment, and soil erosion leads to a decrease in land resources and a decline in land productivity, while soil degradation directly affects the growth of crops and the income of farmers. Therefore, it is essential to integrate environmental protection concepts throughout the entire process of rural land use. In the development and utilization of land resources, environmental protection requirements must be fully considered, adopting scientific and reasonable planning and measures to ensure the full utilization of land resources and achieve sustainable development of rural society.

Special aspects of guarding and protecting sports facilities

Aim: The arrangement and organisation of sports events is a coordinated activity involving several organisations. The purpose of the research is to examine and reveal the special guarding and protection requirements of sports facilities and sports event venues. Methodology: After collecting and processing the reference literature, the Authors applied a qualitative method and focused on the methods and means of providing sports facilities, and looked for specifics from their own point of view. During the research, they used both empirical and logical methods. In order for the earned knowledge to contribute to the solution of practical problems, they chose the activity of practice-oriented research. Findings: Starting from the 1960s, and mainly from the 1980s, the arrangement and organisation of sports events is not just a professional sports issue. The capital injected by economic actors was aimed at organising family, cultural and entertainment events. As a result, unlike before, the sports facilities initially became multi-functional, and then the modern facilities became multi-functional venues. Due to its multi-functionality, special requirements for the security and protection of the venues and the facilities created in their surroundings, with different sports and economic purposes, have developed.

Optimizing Solar Heating for Thangka Exhibition Halls: A Case Study in Malkang Cultural Village

With the continuous development of rural revitalization and urbanization in China, the sustainable transformation of traditional rural architecture has become increasingly important. This study takes the Thangka exhibition hall in rural Malkang, Sichuan Province, as the research object and proposes a Thangka exhibition hall architectural design centered around solar heating and aiming for near-zero energy consumption. The research method involves establishing a solar energy system model on the roof of the exhibition hall and utilizing solar angle and area calculation formulas along with simulation software to calculate the optimal installation angle and area of solar panels, with the aim of achieving indoor temperatures that meet Thangka protection requirements while achieving zero-energy heating. Preliminary results indicate that this solar-centric near-zero energy architectural design can effectively promote the increase in indoor temperature through solar thermal conversion. Additionally, through calculation and simulation, the optimal installation angle for the solar panels achieving zero-energy heating is determined to be 24.25 with an azimuth angle of −1.2. The optimum installation area for solar panels is 8.2 square meters in the showroom and 2.7 square meters in the storeroom. Among these, the solar panel area for the Thangka exhibition hall constitutes 4.12% of the total area and is required for maintaining Thangka protection temperature requirements throughout the year, while the solar panel area for the storage room constitutes 1.88% and is also needed for the same purpose. Studying the optimal installation angle and area of solar panels can transform the exhibition hall into a near-zero-energy building, meeting the temperature requirements for Thangka preservation and human thermal comfort, while also achieving optimal economic benefits. This provides guidance and a reference for promoting near-zero-energy buildings in rural areas.

Special aspects of guarding and protecting sports facilities

Aim: The arrangement and organisation of sports events is a coordinated activity involving several organisations. The purpose of the research is to examine and reveal the special guarding and protection requirements of sports facilities and sports event venues. Methodology: After collecting and processing the reference literature, the Authors applied a qualitative method and focused on the methods and means of providing sports facilities, and looked for specifics from their own point of view. During the research, they used both empirical and logical methods. In order for the earned knowledge to contribute to the solution of practical problems, they chose the activity of practice-oriented research. Findings: Starting from the 1960s, and mainly from the 1980s, the arrangement and organisation of sports events is not just a professional sports issue. The capital injected by economic actors was aimed at organising family, cultural and entertainment events. As a result, unlike before, the sports facilities initially became multi-functional, and then the modern facilities became multi-functional venues. Due to its multi-functionality, special requirements for the security and protection of the venues and the facilities created in their surroundings, with different sports and economic purposes, have developed. Value: The basis of the security technology of sports facilities and the commercial, economic, entertainment, cultural and service units located in them is the security of objects, as well as personal and property security. Guarding and protecting the proper operation of the facilities is an organised and coordinated activity in the same way as in the case of sports events held in the facilities, but the method of implementation is not the same.

Isomerization performance of n-hexane in hydrogen atmosphere over the multistage porous composite NixPy-MCM-41/MOR catalyst

With the increasingly strict environmental protection requirements and the continuous improvement for the performance of clean fuel, it is imperative to develop technology for producing high octane gasoline blending components. Alkane isomerization was one of the important ways due to it contain little olefin and aromatic components which are harmful to the environment. In this study, the multistage porous composite NixPy-MCM-41/MOR catalysts were synthesized in the hydrogen atmosphere, the conversion rate and selectivity of n-hexane hydrogen isomerization with different conditions was tested in a fixed bed reactor. The results shown that the loading volume of active components is 4.0 wt%, nickel-phosphorus ratio of 0.5, reaction temperature of 250 °C, reaction pressure 3.0 MPa and volume space velocity is 2.0 h−1 with the hydrogen condition showed good catalytic activity for the n-hexane isomerization. The conversion rate of n-hexane is 73.0 % and the selectivity of 84.0 %, respectively. The isomerization stability of the Ni2P-MCM-41/MOR catalyst was investigated. After the long period test, the catalytic activity of the catalyst could keep good. Based on the study of reaction effect with different test conditions in hydrogen atmosphere, the mechanism of alkane isomerization for Ni2P-MCM-41/MOR catalyst was proposed.

Humidity regime of building envelope structures of the drying compartment tula brewery

The article presents the results of a study of the humidity regime of building enclosing structures of the drying department of the brewery located in Tula. The assessment of the humidity regime was carried out in order to identify the causes of damage to external, internal walls and attic floors, and the task was also set to develop technical solutions for steam and waterproofing of the above-mentioned enclosing structures. To solve the tasks set, thermophysical calculations of building enclosing structures were performed, as well as an assessment of their moisture accumulation during the operation of the building. The position of the plane of possible condensation was determined using the author’s methodology. The results of thermophysical calculations showed the presence of moisture accumulation in the above-mentioned structures, which is associated with the use of PVC polyethylene film as wind protection. It was also revealed that there was a discrepancy with the regulatory requirements for thermal protection of the external wall of the electrical panel. In order to eliminate these problems, recommendations were made, which consisted in using an Isospan A type film as a vapor barrier, increasing the thickness of the insulation, organizing natural supply and exhaust ventilation of the attic room, as well as waterproofing the structures of the outer wall made of monolithic reinforced concrete.

Experimental and numerical investigation of transpiration cooling with gradient porosity layout for the thermal protection of nose cone

Transpiration cooling with liquid phase change has been widely regarded as one of the most promising thermal protection technology for aerospace vehicles. However, when applied to the nose cone with small curvature radius, cooling failure may occur due to the extreme high heat flux and pressure at the stagnation point. In order to deal with this issue, a wedged-shaped nose cone structures with a gradient porosity layout is designed in this work to optimize the coolant distribution in the porous nose cone, and the corresponding transpiration cooling performance with liquid phase change is experimentally and numerically investigated. At last, to meet the thermal protection requirements under different flight conditions as best as possible, an orthogonal experiment and fuzzy gray analysis were carried out to optimize the particle diameter, porosity layout and division interval of the porous nose cone with gradient porosity layout, taking a specific flight condition as an example. The results obtained in this work showed that gradient porosity layout can significantly improve the cooling efficiency at the stagnation point and the temperature uniformity on the outer surface. The porosity has the highest impact on the cooling performance, while the division interval has little impact. By optimizing, the cooling efficiency at the stagnation point can reach 74.5%, and the maximum temperature difference is less than 500K.