Repeating Unit Research Articles

Exo-chirality of the α-helix

The structure of helical polymers is dictated by the molecular chirality of their monomer units. Particularly, macromolecular helices with monomer sequence control have the potential to generate chiral topologies. In α-helical folded peptides, the sequential repetition of amino acids generates a chiral layer defined by the amino acid side chains projected outside the amide backbone. Despite being closely related to peptides’ structural and functional properties, to the best of our knowledge, a general exo-helical symmetry model has not been yet described for the α-helix. Here, we perform the theoretical, computational, and spectroscopic elucidation of the α-helix principal exo-helical topologies. Non-canonical labeled amino acids are employed to spectroscopically characterize the different exo-helical topologies in solution, which precisely match the theorical prediction. Backbone-to-chromophore distance also shows the expected impact in the exo-helices’ geometry and spectroscopic fingerprint. Theoretical prediction and spectroscopic validation of this exo-helical topological model provides robust experimental evidence of the chiral potential on the surface of helical peptides and outlines an entirely new structural scenario for the α-helix.

Vibrational frequency fluctuations of poly(N,N-diethylacrylamide) in the vicinity of coil-to-globule transition studied by two-dimensional infrared spectroscopy and molecular dynamics simulations.

Poly(N,N-diethylacrylamide) (PdEA), one of the thermoresponsive polymers, in aqueous solutions has attracted much attention because of its characteristic properties, such as coil-to-globule (CG) transition. We performed two-dimensional infrared spectroscopy and molecular dynamics (MD) simulations to understand the hydration dynamics in the vicinity of the CG transition at the molecular level via vibrational frequency fluctuations of the carbonyl stretching modes in the side chains of PdEA. Furthermore, N,N-diethylpropionamide, a repeating monomer unit of PdEA, is also investigated for comparison. From decays of the frequency-frequency time correlation functions (FFTCFs) of the carbonyl stretching modes, we consider that inhomogeneity of the hydration environments originates from various backbone configurations of PdEA. The degree of the inhomogeneity depends on temperature. Hydration water molecules near the carbonyl groups are influenced by the confinements of the polymers. The restricted reorientation of the embedded water, the local torsions of the backbone, and the rearrangement of the whole structure contribute to the slow spectral diffusion. By performing MD simulations, we calculated the FFTCFs and dynamical quantities, such as fluctuations of the dihedral angles of the backbone and the orientation of the hydration water molecules. The simulated FFTCFs match well with the experimental results, indicating that the retarded water reorientations via the excluded volume effect play an important role in the vibrational frequency fluctuations of the carbonyl stretching mode. It is also found the embedded water molecules are influenced by the local torsions of the backbone structure within the time scales of the spectral diffusion.

The Block Copolymer Phase Behavior Database.

The Block Copolymer Database (BCDB) is a platform that allows users to search, submit, visualize, benchmark, and download experimental phase measurements and their associated characterization information for di- and multiblock copolymers. To the best of our knowledge, there is no widely accepted data model for publishing experimental and simulation data on block copolymer self-assembly. This proposed data schema with traceable information can accommodate any number of blocks and at the time of publication contains over 5400 block copolymer total melt phase measurements mined from the literature and manually curated and simulation data points of the phase diagram generated from self-consistent field theory that can rapidly be augmented. This database can be accessed via the Community Resource for Innovation in Polymer Technology (CRIPT) web application and the Materials Data Facility. The chemical structure of the polymer is encoded in BigSMILES, an extension of the Simplified Molecular-Input Line-Entry System (SMILES) into the macromolecular domain, and the user can search repeat units and functional groups using the SMARTS search syntax (SMILES Arbitrary Target Specification). The user can also query characterization and phase information using Structured Query Language (SQL) and download custom sets of block copolymer data to train machine learning models. Finally, a protocol is presented in which GPT-4, an AI-powered large language model, can be used to rapidly screen and identify block copolymer papers from the literature using only the abstract text and determine whether they have BCDB data, allowing the database to grow as the number of published papers on the World Wide Web increases. The F1 score for this model is 0.74. This platform is an important step in making polymer data more accessible to the broader community.

On-Surface Formation and Chemical Transformations of Indigo Coordination Polymers

Coordination polymers are attractive candidates for miniaturized electronics. With unconventional electronic and magnetic properties posited, they are interesting for multiple applications including magnetic information storage and spintronics. Natural products are appealing to tailor advanced new materials, bearing inherent advantages in biodegradation. Among them, we distinguished indigo, a common natural dye with a distinctive blue color, used as a pigment since antiquity. Motivated by its optical properties and the reported metal complexes [1], we employed it as a molecular building block for the surface formation of coordination polymers with iron.We report on the on-surface formation of extended coordination polymers which controllably feature the cis and the transmonomers of the molecular building block. The reaction products of indigo and Fe were characterized atomically by a combination of state-of-the -art experimental and theoretical techniques. By a combination of X-ray photoelectron spectroscopy and scanning tunneling microscopy (STM), it is found that indigo deprotonates and coordinates with Fe atoms on silver surfaces. We identify unambiguously well-defined coordination polymers composed of (1 dehydroindigo : 1 Fe) repeat units with STM, bond-resolving atomic force microscopy and density functional theory (DFT) simulations. On both Ag(100) and on Ag(111), the trans configuration of dehydroindigo results in N,O-chelation in the polymer chains. On the more inert Ag(111) surface, the molecules undergo thermally induced isomerization from the trans to the cisconfiguration and afford N,N- plus O,O-chelation (see figure). This is enabled by the dehydrogenation and is preferential solely in the environment of the coordination chain on Ag(111). DFT calculations also confirm that the coordination polymers of the cis-isomers on Ag(111) and of the trans-isomers on Ag(100) are energetically favored.Our results demonstrate post-synthetic linker isomerization in interfacial metal-organic nanosystems. Both types of coordination polymers are predicted to be spin-crossover systems and the isomerization is anticipated to have a significant impact on their magnetic properties.

The structure of the SufS–SufE complex reveals interactions driving protected persulfide transfer in iron-sulfur cluster biogenesis

Fe-S clusters are critical cofactors for redox chemistry in all organisms. The cysteine desulfurase, SufS, provides sulfur in the SUF Fe-S cluster bioassembly pathway. SufS is a dimeric, PLP-dependent enzyme that uses cysteine as a substrate to generate alanine and a covalent persulfide on an active site cysteine residue. SufS enzymes are activated by an accessory transpersulfurase protein, either SufE or SufU depending on the organism, which accepts the persulfide product and delivers it to downstream partners for Fe-S assembly. Here, using E. coli proteins, we present the first X-ray crystal structure of a SufS/SufE complex. There is a 1:1 stoichiometry with each monomeric unit of the EcSufS dimer bound to one EcSufE subunit, though one EcSufE is rotated ∼7° closer to the EcSufS active site. EcSufE makes clear interactions with the α16 helix of EcSufS and site-directed mutants of several α16 residues were deficient in EcSufE binding. Analysis of the EcSufE structure showed a loss of electron density at the EcSufS/EcSufE interface for a flexible loop containing the highly conserved residue R119. An R119A EcSufE variant binds EcSufS but is not active in cysteine desulfurase assays and fails to support Fe-S cluster bioassembly in vivo. 35S-transfer assays suggest that R119A EcSufE can receive a persulfide, suggesting the residue may function in a release mechanism. The structure of the EcSufS/EcSufE complex allows for comparison with other cysteine desulfurases to understand mechanisms of protected persulfide transfer across protein interfaces.

Electrogeneration and Characterization of Poly(methylene blue) Thin Films on Stainless Steel 316 Electrodes-Effect of pH.

Methylene blue was electropolymerized on the surface of stainless steel 316. The addition of sodium oxalate and working at a pH near 11 allowed us to obtain steel electrodes coated with an electroactive polymer. This polymer shows electrochromic properties like those of the monomer, but also exhibits electroactivity at more positive potentials, which is associated with the active centers in the bridges between monomeric units. A digital video electrochemistry study allowed us to simultaneously quantify, on the one hand, the color changes on the entire surface of the stainless steel and on the other to separate the contribution of the active centers of the phenothiazine ring and of the inter-monomer bonds to the overall polymer response by means of assessing the mean color intensities. A reduction mechanism for the polymer, compatible with the pH variation of the observed electrochemical behavior, was proposed.

Molecular Dynamical and Quantum Mechanical Exploration of the Site-Specific Dynamics of Cy3 Dimers Internally Linked to dsDNA.

Performing spectroscopic measurements on biomolecules labeled with fluorescent probes is a powerful approach to locating the molecular behavior and dynamics of large systems at specific sites within their local environments. The indocarbocyanine dye Cy3 has emerged as one of the most commonly used chromophores. The incorporation of Cy3 dimers into DNA enhances experimental resolution owing to the spectral characteristics influenced by the geometric orientation of excitonically coupled monomeric units. Various theoretical models and simulations have been utilized to aid in the interpretation of the experimental spectra. In this study, we employ all-atom molecular dynamics simulations to study the structural dynamics of Cy3 dimers internally linked to the dsDNA backbone. We used quantum mechanical calculations to derive insights from both the linear absorption spectra and the circular dichroism data. Furthermore, we explore potential limitations within a commonly used force field for cyanine dyes. The molecular dynamics simulations suggest the presence of four possible Cy3 dimeric populations. The spectral simulations on the four populations show one of them to agree better with the experimental signatures, suggesting it to be the dominant population. The relative orientation of Cy3 in this population compares very well with previous predictions from the Holstein-Frenkel Hamiltonian model.

Polyamidoamine-based photostabilizers for cotton fabrics

Four water-soluble α-amino acid-derived polyamidoamines (PAAs) obtained by reacting N,N’-methylenebisacrylamide with glycine, leucine, arginine and glutamic acid were studied as photostabilizers of cotton. Untreated and PAA-treated cotton strips with 10 % PAA add-on underwent accelerated photoaging by UV irradiation in air at temperature from 25 to 50°C and 30 % relative humidity. Irradiation was applied in consecutive 4 h cycles, after each of which samples were analyzed by different techniques. After 30 h irradiation, the whiteness index and colorimetric parameters indicated significant yellowing of cotton, which became slightly more intense after 100 h irradiation. On irradiation, PAA-treated samples showed only slow decrease in whiteness and increase in yellowing. After 100 h, yellowing achieved significantly lower levels than in untreated cotton. In no case did the infrared spectroscopy and electron microscopy reveal detectable structural and morphological alterations, even after 100 h of UV exposure. Thermogravimetric analysis showed only little changes of thermograms following photoaging. X-ray diffraction analysis revealed slight deformation of the cellulose crystalline structure following both PAA treatment and UV irradiation. Finally, the PAA coatings were extracted from the cotton strips and analyzed by 1H-NMR analysis. Only the glutamic acid-derived PAA showed detectable structural changes that did not involve the main chain. The FT-IR spectra and white indexes of the washed cotton strips did not differ from those of untreated cotton. Overall, it was proven that α-amino acid-derived PAAs protect cotton from photo-oxidation. Their performance was attributed to the radical scavenging ability of tert-amine groups present in their repeat units.

Point-Defect Segregation and Space-Charge Potentials at the Σ5(310)[001] Grain Boundary in Ceria

The atomistic structure and point-defect thermodynamics of the model Σ5(310)[001] grain boundary in CeO2 were explored with atomistic simulations. An interface with a double-diamond-shaped structural repeat unit was found to have the lowest energy. Segregation energies were calculated for oxygen vacancies, electron polarons, gadolinium and scandium acceptor cations, and tantalum donor cations. These energies deviate strongly from their bulk values over the same length scale, thus indicating a structural grain-boundary width of approximately 1.5 nm. However, an analysis revealed no unambiguous correlation between segregation energies and local structural descriptors, such as interatomic distance or coordination number. From the segregation energies, the grain-boundary space-charge potential in Gouy–Chapman and restricted-equilibrium regimes was calculated as a function of temperature for dilute solutions of (i) oxygen vacancies and acceptor cations and (ii) electron polarons and donor cations. For the latter, the space-charge potential is predicted to change from negative to positive in the restricted-equilibrium regime. For the former, the calculation of the space-charge potential from atomistic segregation energies is shown to require the inclusion of the segregation energies for acceptor cations. Nevertheless, the space-charge potential in the restricted-equilibrium regime can be described well with an empirical model employing a single effective oxygen-vacancy segregation energy.

ESR, UV–vis–NIR and FTIR spectroscopic characterization of charge carriers in copper salen polymeric complexes

In this work, we present spectroscopic investigation of charge carriers in copper(II) salen-type polymeric complexes. The polymers comprising monomeric complexes of copper(II) ion with N2O2 Schiff base ligands are analyzed to understand the influence of the paramagnetic metal center and electron-donating substituents in the ligand on the spectroscopic properties of oxidized polymers. Potential-driven structural changes in the polymeric complexes were monitored using electron spin resonance (ESR), ultraviolet−visible − near infrared (UV−vis − NIR) and Fourier Transform Infrared (FTIR) spectroelectrochemistry. By EPR spectroelectrochemistry, we gained insight into the magnetic properties of charge carriers formed during the initial and deep oxidation of the polymers as well as the interactions between the Cu(II)–ligand spins and ligand–ligand ones. By FTIR spectroelectrochemistry, it has been shown that the charge in the low doped polymers is delocalized within the whole repeat unit.

RiboScreenTM Technology Delivers a Ribosomal Target and a Small-Molecule Ligand for Ribosome Editing to Boost the Production Levels of Tropoelastin, the Monomeric Unit of Elastin.

Elastin, a key structural protein essential for the elasticity of the skin and elastogenic tissues, degrades with age. Replenishing elastin holds promise for anti-aging cosmetics and the supplementation of elastic activities of the cardiovascular system. We employed RiboScreenTM, a technology for identifying molecules that enhance the production of specific proteins, to target the production of tropoelastin. We make use of RiboScreenTM in two crucial steps: first, to pinpoint a target ribosomal protein (TRP), which acts as a switch to increase the production of the protein of interest (POI), and second, to identify small molecules that activate this ribosomal protein switch. Using RiboScreenTM, we identified ribosomal protein L40, henceforth eL40, as a TRP switch to boost tropoelastin production. Drug discovery identified a small-molecule hit that binds to eL40. In-cell treatment demonstrated activity of the eL40 ligand and delivered increased tropoelastin production levels in a dose-dependent manner. Thus, we demonstrate that RiboScreenTM can successfully identify a small-molecule hit capable of selectively enhancing tropoelastin production. This compound has the potential to be developed for topical or systemic applications to promote skin rejuvenation and to supplement elastic functionality within the cardiovascular system.

Solvent-based synthesis, structural elucidation and thermal characterisation of free radical grafted PHBV

This study investigates the solvent-based free-radical graft copolymerization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) with C11 (undecenoic acid, UDA), C12 (dodecene, DD), and C18 (octadecene, OD) alkene substrates using dicumyl peroxide as an initiator. Comprehensive Nuclear Magnetic Resonance (NMR) spectroscopy was employed to confirm and quantify grafting, which was achieved at up to 5.8 mol% of monomer units. Thermal analysis revealed a significant reduction in melting temperature for all modified PHBVs, ranging from 10-20°C decrease in comparison to virgin PHBV. A decrease in crystallisation temperature and a reduction in glass transition temperature was measured for the UDA and DD grafted PHBV. Additionally, molecular weight analysis showed a marked decrease in weight average molecular weight (M¯w) and number average molecular weight (M¯n) for PHBV grafted with UDA, which was attributed to the presence of carboxylic acid functionality, which accelerates chain scission. The molecular weight profiles of the dodecene and octadecene grafted PHBV were only marginally reduced (32% and 18% reductions in M¯w, respectively), which is a much less severe reduction than has been previously observed for similar chemistries. Overall, this work demonstrates that solvent-based free-radical graft copolymerization can reduce the melting temperature and disrupt the crystallinity of PHBV, hence improving its processability and progressing the field of PHA modification and application.

Polyampholytes with Various Charge Distributions: Conformation States via Computer Simulation.

By means of molecular dynamics computer simulation, the conformational space of polyampholyte macromolecules with various distributions of the charged groups along the chain is studied. A coarse-grained model where each monomer unit of the chain is presented as a non-charged group in the backbone of the macromolecule connected with a charged side pendant is considered. A limiting case of fully charged chains in the isoelectric point is investigated. The oppositely charged monomer units are distributed in various patterns: regular alternating, multiblock, or random sequences. It is found that the chains with random unit distribution adopt much more compacted conformations than the chains with regular distributions with comparable block lengths. Calculating the chain size and its fluctuation along with the spatial density distribution, coil, and globular conformations are distinguished and arranged on the diagrams in terms of chain length, block length, and Bjerrum length.

COSMOPharm: Drug-Polymer Compatibility of Pharmaceutical Amorphous Solid Dispersions from COSMO-SAC.

The quantum mechanics-aided COSMO-SAC activity coefficient model is applied and systematically examined for predicting the thermodynamic compatibility of drugs and polymers. The drug-polymer compatibility is a key aspect in the rational selection of optimal polymeric carriers for pharmaceutical amorphous solid dispersions (ASD) that enhance drug bioavailability. The drug-polymer compatibility is evaluated in terms of both solubility and miscibility, calculated using standard thermodynamic equilibrium relations based on the activity coefficients predicted by COSMO-SAC. As inherent to COSMO-SAC, our approach relies only on quantum-mechanically derived σ-profiles of the considered molecular species and involves no parameter fitting to experimental data. All σ-profiles used were determined in this work, with those of the polymers being derived from their shorter oligomers by replicating the properties of their central monomer unit(s). Quantitatively, COSMO-SAC achieved an overall average absolute deviation of 13% in weight fraction drug solubility predictions compared to experimental data. Qualitatively, COSMO-SAC correctly categorized different polymer types in terms of their compatibility with drugs and provided meaningful estimations of the amorphous-amorphous phase separation. Furthermore, we analyzed the sensitivity of the COSMO-SAC results for ASD to different model configurations and σ-profiles of polymers. In general, while the free volume and dispersion terms exerted a limited effect on predictions, the structures of oligomers used to produce σ-profiles of polymers appeared to be more important, especially in the case of strongly interacting polymers. Explanations for these observations are provided. COSMO-SAC proved to be an efficient method for compatibility prediction and polymer screening in ASD, particularly in terms of its performance-cost ratio, as it relies only on first-principles calculations for the considered molecular species. The open-source nature of both COSMO-SAC and the Python-based tool COSMOPharm, developed in this work for predicting the API-polymer thermodynamic compatibility, invites interested readers to explore and utilize this method for further research or assistance in the design of pharmaceutical formulations.

One-Pot Self-Assembly of Sequence-Controlled Mesoporous Heterostructures via Structure-Directing Agents.

Multimaterial heterostructures have led to characteristics surpassing the individual components. Nature controls the architecture and placement of multiple materials through biomineralization of nanoparticles (NPs); however, synthetic heterostructure formation remains limited and generally departs from the elegance of self-assembly. Here, a class of block polymer structure-directing agents (SDAs) are developed containing repeat units capable of persistent (covalent) NP interactions that enable the direct fabrication of nanoscale porous heterostructures, where a single material is localized at the pore surface as a continuous layer. This SDA binding motif (design rule 1) enables sequence-controlled heterostructures, where the composition profile and interfaces correspond to the synthetic addition order. This approach is generalized with 5 material sequences using an SDA with only persistent SDA-NP interactions ("P-NP1-NP2"; NPi = TiO2, Nb2O5, ZrO2). Expanding these polymer SDA design guidelines, it is shown that the combination of both persistent and dynamic (noncovalent) SDA-NP interactions ("PD-NP1-NP2") improves the production of uniform interconnected porosity (design rule 2). The resulting competitive binding between two segments of the SDA (P- vs D-) requires additional time for the first NP type (NP1) to reach and covalently attach to the SDA (design rule 3). The combination of these three design rules enables the direct self-assembly of heterostructures that localize a single material at the pore surface while preserving continuous porosity.

Using Molecular Structure to Tune Intrachain and Interchain Charge Transport in Indacenodithiophene-Based Copolymers.

In this work, we compare two structurally near-amorphous rigid-rod polymers─poly(indacenodithiophene-co-benzothiadiazole), p(IDT-BT), and poly(indacenodithiophene-co-benzopyrollodione), p(IDT-BPD)─with orders of magnitude different mobilities to understand the effect charge carrier intrachain delocalization has on electronic transport. Quantum chemical calculations show that p(IDT-BPD) has a barrier to torsion that is significantly lower than that of p(IDT-BT) and is thus more likely to have reduced conjugation lengths. We utilize absorption and photoluminescence spectroscopy to characterize energetic disorder and show that p(IDT-BPD) has higher energetic disorder. Charge modulation spectroscopy (CMS) and model calculations are used to show that charge carriers are substantially delocalized in p(IDT-BT) and occupy near-uniform energetic environments. We find that mobility activated hopping barriers are similar in these two materials. Electronic structure calculations show that both intrachain and interchain couplings of monomer units are poor enough in p(IDT-BPD) that charge carriers collapse to single IDT units and transport via a through-space tunneling mechanism. This work highlights the remarkable charge transport properties of p(IDT-BT) by showing that high mobilities are achievable on device-relevant length scales with only 1D carrier delocalization.

Research on the Mechanical and Thermal Properties of Carbon-Fiber-Reinforced Rubber Based on a Finite Element Simulation.

The comprehensive performance of rubber products could be significantly improved by the addition of functional fillers. To improve research efficiency and decrease the experimental cost, the mechanical and thermal properties of carbon-fiber-reinforced rubber were investigated using finite element simulations and theoretical modeling. The simplified micromechanical model was constructed through the repeatable unit cell with periodic boundary conditions, and the corresponding theoretical models were built based on the rule of mixture (ROM), which can be treated as the mutual verification. The simulation results suggest that, in addition to the fiber volume fraction Vfc increasing from 10% to 70%, the longitudinal Young's modulus, transversal Young's modulus, in-plane shear modulus, longitudinal thermal expansion coefficient, and transversal thermal expansion coefficient changed from 2.31 × 1010 Pa to 16.09 × 1010 Pa, from 0.54 × 107 Pa to 2.59 × 107 Pa, from 1.66 × 106 Pa to 10.11 × 106 Pa, from -4.98 × 10-7 K-1 to -5.89 × 10-7 K-1, and from 5.72 × 10-4 K-1 to 1.66 × 10-4 K-1, respectively. The mechanism by which Vfc influences the properties of carbon-fiber-reinforced rubber was revealed through the distribution of Von Mises stress. This research will contribute to improving the performance of carbon-fiber-reinforced rubber and promote its application.

Comparative genomic and phylogenetic analysis of the complete mitochondrial genome of Cricula trifenestrata (Helfer) among lepidopteran insects.

Cricula trifenestrata Helfer (commonly known as Amphutukoni muga/Cricula silkworm), a wild sericigenous insect produces golden yellow silk similar to Antheraea assamensis (muga silkworm), with significant potential as a natural fiber and biomaterial. Cricula is considered as a pest as it competes for food with muga, which produces the prized golden silk. This study focuses on decoding the mitochondrial genome of C. trifenestrata using next-generation sequencing technology and includes comparative analysis with Bombycoids and other lepidopteran insects. We found that the Cricula mitogenome spans 15 425bp and exhibits typical gene content and arrangement consistent with other Saturniids and lepidopterans. All protein-coding genes were found to undergo purifying selection, with the highest and lowest conservation observed in the cox1 and atp8 gene, respectively, indicating their potential role in future evolutionary events. We identified two types of mismatches: 23 "G-U" and 6 "U-U" pairs, similar to those found in Actias selene among the Saturniids. Additionally, our study uncovered the presence of two 33bp repeat units and a "TTAGA" motif in the control region, in contrast to the typical "ATAGA" motif, suggesting functional similarity with evolving sequences. Furthermore, phylogenetic analysis supports the close relationship of Cricula with other species within the Saturniidae family.

Polypeptoid Monomer Sequence and Chemical Composition as Independent Controls of Interfacial Tension and Elasticity at Air/Fluid Interfaces.

We use sequence-specific polypeptoids to characterize the impact of the monomer sequence on the adsorption of surface-active polymers at fluid/fluid interfaces. Sets of 36 repeat unit polypeptoids with identical chemical composition, but different sequences of hydrophobic moieties along the oligomer chain (taper, inverse taper, blocky, and evenly distributed), are designed and characterized at air/water interfaces. Polypeptoids are driven to the interfaces by decreasing the solvent quality of the aqueous solution. In situ processing of the adsorbed layers causes a collapse of polypeptoids and the formation of irreversibly adsorbed, solvent-avoiding layers at interfaces. Differences in thermodynamic properties, driven by solubility, between the collapsed structures at interfaces are studied with measurements of interfacial tension. The dilatational modulus of polypeptoid-coated interfaces is used as a proxy to probe the extent of the coil-globule collapse at the interface. The role of hydrophobicity is investigated by comparing four sequences of polypeptoids with an increased size of the hydrophilic side chains. In each set of polypeptoids, the composition of molecules, not the sequence, controls the surface concentration. The molecules are described in terms of the distribution of the hydrophobic monomers on the backbone of the polymer. Inverse taper (IT) and blocky (B) sequences of hydrophobic moieties favor the formation of highly elastic interfaces after processing, while taper (T) and distributed (D) showed lower elasticity after processing, which is achieved by replacing good solvent with poor solvent and then nonsolvent. These structures allow for the study of the impact of the chemical composition and sequence of monomers on the properties of polymer-coated interfaces.

Bioactive Hydrogel Formulation Based on Ferulic Acid-Grafted Nano-Chitosan and Bacterial Nanocellulose Enriched with Selenium Nanoparticles from Kombucha Fermentation.

Selenium nanoparticles (SeNPs) have specific properties that result from their biosynthesis particularities. Chitosan can prevent pathogenic biofilm development. A wide palette of bacterial nanocellulose (BNC) biological and physical-chemical properties are known. The aim of this study was to develop a hydrogel formulation (SeBNCSFa) based on ferulic acid-grafted chitosan and bacterial nanocellulose (BNC) enriched with SeNPs from Kombucha fermentation (SeNPsK), which could be used as an adjuvant for oral implant integration and other applications. The grafted chitosan and SeBNCSFa were characterized by biochemical and physical-chemical methods. The cell viability and proliferation of HGF-1 gingival fibroblasts were investigated, as well as their in vitro antioxidant activity. The inflammatory response was determined by enzyme-linked immunosorbent assay (ELISA) of the proinflammatory mediators (IL-6, TNF-α, and IL-1β) in cell culture medium. Likewise, the amount of nitric oxide released was measured by the Griess reaction. The antimicrobial activity was also investigated. The grafting degree with ferulic acid was approximately 1.780 ± 0.07% of the total chitosan monomeric units, assuming single-site grafting per monomer. Fourier-transform infrared spectroscopy evidenced a convolution of BNC and grafted chitosan spectra, and X-ray diffraction analysis highlighted an amorphous rearrangement of the diffraction patterns, suggesting multiple interactions. The hydrogel showed a high degree of cytocompatibility, and enhanced antioxidant, anti-inflammatory, and antimicrobial potentials.