Relevant Anatomical Structures Research Articles

Standardize the Surgical Technique and Clarify the Relevant Anatomic Concept for Complete Mobilization of Colonic Splenic Flexure Using da Vinci Xi® Robotic System.

The present study is to set up a standardized approach for complete mobilization of colonic splenic flexure using da Vinci Xi® robotic system, based on clarification of the mesenteric structures of distal transverse colon. The surgical outcomes and relevant anatomic structures of 104 consecutive patients undergoing robotic resection of primary colorectal cancer with the intent of complete mobilization of colonic splenic flexure using da Vinci Xi® robotic system were retrospectively reviewed. Complete mobilization of colonic splenic flexure can be efficiently performed by the Xi® robotic system, as demonstrated by short operation time, minimal intra-operative blood loss, and few surgical complications. Xi® robotic system has overcome the drawbacks of Si® robotic system for the mobilization of colonic splenic flexure. The present study defined the following anatomic hallmarks for the colonic splenic flexure: (1) The transverse mesocolon distal to the inferior mesenteric vein adheres to the low border of pancreas by the avascular fibrous connective tissues, which have been inappropriately named as "mesenteric root"; (2) The colonic splenic flexure abuts closely to spleen with an acute angle in 78.85% (n = 82/104); (3) Only a minority of patients presented with the Riolan branch (15.38%, n = 16/104) or the Moskowitz artery (8.65%, n = 9/104). With increased maneuverability of Xi® robotic arms and the clarification of relevant anatomic concept, the surgical technique for the complete mobilization of colonic splenic flexure can be standardized; and the standardization of surgical technique is the first step toward the enhanced automation in the rapidly evolving robotic systems.

Splitting of the semispinalis capitis muscle as a less invasive approach for atlantoaxial fusion – A technical note

PurposeAtlantoxial fusion with screw rod constructs traditionally requires subperiostal dissection of the C1/C2 muscle attachments, which may lead to postoperative axial neck pain and intraoperative blood loss. We evaluate a potentially less invasive, muscle splitting approach for atlantoaxial fusion in a cadaver model. MethodsA technical feasibility study was performed in a human cadaveric specimen with standard surgical instruments and an operating microscope. Surgically relevant anatomical structures as well as final exposure of the C1, C1/C2 and C2 screw entry points are demonstrated. ResultsFollowing a midline skin incision, blunt mobilization and downward retraction of the trapezius and splenius capitis muscle is followed by a longitudinal split of the semispinalis capitis muscle. At the lower border of the rectus capitis posterior major and the obliquus capitis inferior muscle the entry points for C1 lateral mass, C1/C2 transarticular and C2 pedicle screw are exposed. ConclusionMinimal invasive splitting of the semispinalis capitis muscle allows adequate exposure of the screw entry points of C1, C1/C2 and C2 while preserving the intrinsic muscles of the back at the craniocervical junction.

Region-specific susceptibility change in cognitively impaired patients with diabetes mellitus.

Emerging evidence suggests that diabetes mellitus (DM) is associated with iron and calcium metabolism. However, few studies have investigated the presence of DM in cognitively impaired patients and its effect on brain iron and calcium accumulation. Therefore, we assessed the effects of DM on cognitively impaired patients using quantitative susceptibility mapping (QSM). From June 2012 to Feb 2014, 92 eligible cognitively impaired patients underwent 3T magnetic resonance imaging (MRI). There were 46 patients with DM (DM+) and 46 aged matched patients without DM (DM-). QSM was obtained from gradient echo data and analyzed by drawing regions of interest around relevant anatomical structures. Clinical factors and vascular pathology were also evaluated. Measurement differences between DM+ and DM- patients were assessed by t tests. A multiple regression analysis was performed to identify independent predictors of magnetic susceptibility. DM+ patients showed lower susceptibility values, indicative of lower brain iron content, than DM- patients, which was significant in the hippocampus (4.80 ± 8.31 ppb versus 0.22 ± 10.60 ppb, p = 0.024) and pulvinar of the thalamus (36.30 ± 19.88 ppb versus 45.90 ± 20.02 ppb, p = 0.023). On multiple regression analysis, microbleed number was a predictor of susceptibility change in the hippocampus (F = 4.291, beta = 0.236, p = 0.042) and DM was a predictor of susceptibility change in the pulvinar of the thalamus (F = 4.900, beta = - 0.251, p = 0.030). In cognitively impaired patients, presence of DM was associated with lower susceptibility change in the pulvinar of the thalamus and hippocampus. This suggests that there may be region-specific alterations of calcium deposition in cognitively impaired subjects with DM.

Interspace between Popliteal Artery and posterior Capsule of the Knee (IPACK) Injectate Spread: A Cadaver Study

Local anesthetic injection into the interspace between the popliteal artery and the posterior capsule of the knee (IPACK) has the potential to provide motor-sparing analgesia to the posterior knee after total knee arthroplasty. The primary objective of this cadaveric study was to evaluate injectate spread to relevant anatomic structures with IPACK injection. After receipt of Institutional Review Board Biospecimen Subcommittee approval, IPACK injection was performed on fresh-frozen cadavers. The popliteal fossa in each specimen was dissected and examined for injectate spread. Ten fresh-frozen cadaver knees were included in the study. Injectate was observed to spread in the popliteal fossa at a mean ± SD of 6.1 ± 0.7 cm in the medial-lateral dimension and 10.1 ± 3.2 cm in the proximal-distal dimension. No injectate was noted to be in contact with the proximal segment of the sciatic nerve, but 3 specimens showed injectate spread to the tibial nerve. In 3 specimens, the injectate showed possible contact with the common peroneal nerve. The middle genicular artery was consistently surrounded by injectate. This cadaver study of IPACK injection demonstrated spread throughout the popliteal fossa without proximal sciatic involvement. However, the potential for injectate to spread to the tibial or common peroneal nerve was demonstrated. Consistent surrounding of the middle genicular artery with injectate suggests a potential mechanism of analgesia for the IPACK block, due to the predictable relationship between articular sensory nerves and this artery. Further study is needed to determine the ideal site of IPACK injection.

Human-level Performance On Automatic Head Biometrics In Fetal Ultrasound Using Fully Convolutional Neural Networks.

Measurement of head biometrics from fetal ultrasonography images is of key importance in monitoring the healthy development of fetuses. However, the accurate measurement of relevant anatomical structures is subject to large inter-observer variability in the clinic. To address this issue, an automated method utilizing Fully Convolutional Networks (FCN) is proposed to determine measurements of fetal head circumference (HC) and biparietal diameter (BPD). An FCN was trained on approximately 2000 2D ultrasound images of the head with annotations provided by 45 different sonographers during routine screening examinations to perform semantic segmentation of the head. An ellipse is fitted to the resulting segmentation contours to mimic the annotation typically produced by a sonographer. The model's performance was compared with inter-observer variability, where two experts manually annotated 100 test images. Mean absolute model-expert error was slightly better than inter-observer error for HC (1.99mm vs 2.16mm), and comparable for BPD (0.61mm vs 0.59mm), as well as Dice coefficient (0.980 vs 0.980). Our results demonstrate that the model performs at a level similar to a human expert, and learns to produce accurate predictions from a large dataset annotated by many sonographers. Additionally, measurements are generated in near real-time at 15fps on a GPU, which could speed up clinical workflow for both skilled and trainee sonographers.

Endoscopic Approach to the Quadrilateral Plate (EAQUAL): a New Endoscopic Approach for Plate Osteosynthesis of the Pelvic Ring and Acetabulum - a Cadaver Study.

Dislocated pelvic fractures which require surgical repair are usually operated on via open surgery. Approach-related morbidity is reported with a frequency of up to 30%. The aim of this anatomical study was to prove the feasibility of endoscopic visualisation of the relevant anatomical structures in pelvic surgery and to perform completely endoscopic plate osteosynthesis of the acetabulum with available standard laparoscopic instruments. In four human cadavers, we established an endoscopic preparation of the complete pelvic ring, from the symphysis to the iliosacral joint, including the quadrilateral plate and the sciatic nerve, and performed endoscopic plate osteosynthesis along the iliopectineal line. The endoscopic preparation of the complete pelvic ring and the quadrilateral plate was demonstrated step-by-step, followed by completely endoscopic plate osteosynthesis along the pelvic brim. Endoscopic, radiographic, and schematic pictures are used to illustrate the technique. The completely endoscopic preparation of the pelvic brim and the quadrilateral plate is feasible with available standard laparoscopic instruments. Moreover, plate osteosynthesis could be performed endoscopically. Further research on reduction techniques is necessary when planning to implement this technique into a clinical scenario.

Does the Watson-Jones or Modified Smith-Petersen Approach Provide Superior Exposure for Femoral Neck Fracture Fixation?

A well-reduced femoral neck fracture is more likely to heal than a poorly reduced one, and increasing the quality of the surgical exposure makes it easier to achieve anatomic fracture reduction. Two open approaches are in common use for femoral neck fractures, the modified Smith-Petersen and Watson-Jones; however, to our knowledge, the quality of exposure of the femoral neck exposure provided by each approach has not been investigated. (1) What is the respective area of exposed femoral neck afforded by the Watson-Jones and modified Smith-Petersen approaches? (2) Is there a difference in the ability to visualize and/or palpate important anatomic landmarks provided by the Watson-Jones and modified Smith-Petersen approaches? Ten fresh-frozen human pelvi underwent both modified Smith-Petersen (utilizing the caudal extent of the standard Smith-Petersen interval distal to the anterosuperior iliac spine and parallel to the palpable interval between the tensor fascia lata and the sartorius) and Watson-Jones approaches. Dissections were performed by three fellowship-trained orthopaedic traumatologists with extensive experience in both approaches. Exposure (in cm) was quantified with calibrated digital photographs and specialized software. Modified Smith-Petersen approaches were analyzed before and after rectus femoris tenotomy. The ability to visualize and palpate seven clinically relevant anatomic structures (the labrum, femoral head, subcapital femoral neck, basicervical femoral neck, greater trochanter, lesser trochanter, and medial femoral neck) was also recorded. The quantified area of the exposed proximal femur was utilized to compare which approach afforded the largest field of view of the femoral neck and articular surface for assessment of femoral neck fracture and associated femoral head injury. The ability to visualize and palpate surrounding structures was assessed so that we could better understand which approach afforded the ability to assess structures that are relevant to femoral neck fracture reduction and fixation. After controlling for age, body mass index, height, and sex, we found the modified Smith-Petersen approach provided a mean of 2.36 cm (95% confidence interval [CI], 0.45-4.28 cm; p = 0.015) additional exposure without rectus femoris tenotomy (p = 0.015) and 3.33 cm (95% CI, 1.42-5.24 cm; p = 0.001) additional exposure with a tenotomy compared with the Watson-Jones approach. The labrum, femoral head, subcapital femoral neck, basicervical femoral neck, and greater trochanter were reliably visible and palpable in both approaches. The lesser trochanter was palpable in all of the modified Smith-Petersen and none of the Watson-Jones approaches (p < 0.001). All modified Smith-Petersen approaches (10 of 10) provided visualization and palpation of the medial femoral neck, whereas visualization of the medial femoral neck was only possible in one of 10 Watson-Jones approaches (p < 0.001) and palpation was possible in eight of 10 Watson-Jones versus all 10 modified Smith-Petersen approaches (p = 0.470). In the hands of surgeons experienced with both surgical approaches to the femoral neck, the modified Smith-Petersen approach, with or without rectus femoris tenotomy, provides superior exposure of the femoral neck and articular surface as well as visualization and palpation of clinically relevant proximal femoral anatomic landmarks compared with the Watson-Jones approach. Open reduction and internal fixation of a femoral neck fracture is typically performed in a young patient (< 60 years old) with the objective of obtaining anatomic reduction that would not be possible by closed manipulation, thus enhancing healing potential. In the hands of surgeons experienced in both approaches, the modified Smith-Petersen approach offers improved direct access for reduction and fixation. Higher quality reductions and fixation are expected to translate to improved healing potential and outcomes. Although our experimental results are promising, further clinical studies are needed to verify if this larger exposure area imparts increased quality of reduction, healing, and improved outcomes compared with other approaches. The learning curve for the exposure is unclear, but the approach has broad applications and is frequently used in other subspecialties such as for direct anterior THA and pediatric septic hip drainage. Surgeons treating femoral neck fractures with open reduction and fixation should familiarize themselves with the modified Smith-Petersen approach.

Near‐Peer Created Videos: A Valuable Tool in Focusing Student Learning in the Gross Anatomy Laboratory

Near‐peer teachers continue to be a significant driving force behind curricular changes that provide anatomy instruction to meet the needs of students in the current learning environment. Near‐peer teaching assistants (TAs) are important contributors in the facilitation of Mayo Clinic School of Medicine, anatomy course. The team‐based design of this course incorporates various approaches to team oriented activities, including introduction to radiology and ultrasound education and whole body dissections. TAs are equally involved in delivery of briefing sessions, prosections, guidance of student dissections, and review sessions. While students acknowledge educational benefits of learning anatomy through dissection, many still experience challenges in effectively using combined classical resources such as dissection manuals, textbooks, atlases, and various computer‐assisted tools. To enhance student competency in dissection as well as to maintain curricular alignment between clinically oriented course content and dissection goals often different than what is presented in dissection manuals or commercially available videos, TAs dissected a cadaver and created short videos. Videos outlined necessary steps for the assigned dissection, identified challenging aspects of dissection procedure, and provided review of clinically relevant anatomic structures. Videos were filmed daily by TAs using commercially available iPads or iPhones and edited using iMovie software. All videos were uploaded to Blackboard curriculum management system the day before dissection and remained accessible to students throughout the course. The objective of this study was to determine medical student satisfaction and utilization of near‐peer created teaching videos for preparation and guidance of laboratory dissection. A total of 28 videos were created that ran from approximately 2 to 13 min in duration. Viewing data for the videos was tracked on the server and a survey was distributed to the students after the final examination (IRB protocol #17‐009090). Response rate was 91% (48 of 53 students responded to the survey). The survey used a five‐point Likert scale in which 1 = strongly disagree and 5 = strongly agree. In general, students found the videos useful in their preparation for laboratory dissection. They agreed that they frequently used the videos to prepare for the assigned dissection (4.74) and they felt that videos improved their efficiency (4.73) and confidence (4.45) in the laboratory. Additionally, 47% of students ranked the videos as their primary resource for dissection preparation. Near‐peer created videos provide an inexpensive and effective alternative to commercially available products. In addition, these videos allow facilitators to relate course specific material with dissection goals, advance self‐directed learning, and help students overcome the challenge of potential cognitive overload from the need to consult too many references within a short timeframe of the dissection laboratory.This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Axillary Sonography of the Shoulder: An Adjunctive Approach.

Sonography of the shoulder is widely used to assess various disorders, including tendinous diseases of the rotator cuff and the long head of the biceps brachii muscle. The shoulder is commonly explored through anterior, superior, and posterior approaches, but the inferior axillary approach is rarely considered in the literature. However, this technique allows the direct visualization of relevant anatomic structures. The aim of this pictorial essay is, first, to technically describe this approach and the normal musculoskeletal sonographic anatomy of the region and, second, to present the sonographic findings of shoulder disorders that may be helpfully explored this technique.

Ultrasound as an Assessment Method in Predicting Difficult Intubation: A Prospective Clinical Study.

Aim of the study is to predict the difficulty in intubation preoperatively using ultrasonography. One hundred and thirty-seven patients underwent ultrasound followed by surgery under general anesthesia. A experienced radiologist examined the airway and performed measurements of specific airway parameters: visualization of hyoid bone, visualization of vocal cords through thyroid cartilage, visualization of epiglottis, distance from base of tongue to hyoid bone, distance of hyomental region distance of thyrohyoid region, distance between skin and fat pad thickness to thyroid cartilage, thickness of submental region, distance from epiglottis to skin (above hyoid), and visualization of cricothyroid membrane. After performing ultrasound, patient was presented for surgery. An experienced anesthesiologist who is associated with this study did all the laryngoscopy and intubation. We were able to visualize all relevant anatomical structures in all the participants using ultrasound. The receiver operating characteristic curve analysis results showed that hyomental is≤1.09 (P value<0.01) to classify difficult in intubation. The study shows that ultrasound can reliably image all the airway structures. This study suggests that hyomental distance is a more valid criterion in predicting difficult intubation. Further, case control study is needed for assessing the ease of intubation.

Multidetector CT of Midfacial Fractures: Classification Systems, Principles of Reduction, and Common Complications.

The advent of titanium hardware, which provides firm three-dimensional positional control, and the exquisite bone detail afforded by multidetector computed tomography (CT) have spurred the evolution of subunit-specific midfacial fracture management principles. The structural, diagnostic, and therapeutic complexity of the individual midfacial subunits, including the nose, the naso-orbito-ethmoidal region, the internal orbits, the zygomaticomaxillary complex, and the maxillary occlusion-bearing segment, are not adequately reflected in the Le Fort classification system, which provides only a general framework and has become less relevant in contemporary practice. The purpose of this article is to facilitate the involvement of radiologists in the delivery of individualized multidisciplinary care to adults who have sustained blunt trauma and have midfacial fractures by providing a clinically relevant review of the role of multidetector CT in the management of each midfacial subunit. Surgically relevant anatomic structures, search patterns, critical CT findings and their management implications, contemporary classification systems, and common posttraumatic and postoperative complications are emphasized. ©RSNA, 2018.

Feasibility of Endoscopic Inspection of Pedicle Wall Integrity in a Live Surgery Model.

Perforations of the pedicle wall during cannulation can occur with experienced surgeons. Direct endoscopic visualization has not been used to inspect pedicles previously due to bone bleeding obscuring the camera visualization. The hypothesis of this study was that endoscopic visualization of pedicle wall integrity was technically feasible and would enable identification of clinically significant pedicle breaches. A live porcine model was used. Eight lumbar pedicles were cannulated. Clinically significant breaches were created. An endoscope was introduced and was used to inspect the pedicles. All lumbar pedicles were endoscopically visible at a systolic pressure of 100 mm Hg. Clinically relevant anatomic structures and iatrogenic pathology, such as medial, lateral, and anterior breaches, were identified. There were no untoward events resulting from endoscopic inspection of the pedicle endosteal canal. Endoscopic inspection of lumbar pedicles was safe and effective. The findings on endoscopic inspection corresponded with the ball-tip probe palpation techniques. Additional techniques, such as selection between 2 tracts, was possible with the endoscopic technique.

Computed Tomography Evaluation of the Correspondence Between the Arcuate Eminence and the Superior Semicircular Canal.

The arcuate eminence (AE) has been traditionally used in middle cranial fossa (MCF) surgery as a guide to accurate location of the superior semicircular canal (SSC) deep within the temporal bone. However, theanatomic relationship between the AE and SSC is controversial. We evaluated the anatomic coincidence between the AE and the SSC in the MCF surface. Distances between the most relevant anatomic structures in the MCF and prevalence of SSC dehiscence were measured. We analyzed 75 (150 sides) 0.75-mm slice thickness temporal bone computed tomography scans and classified the AE and SSC relationship as coincident and noncoincident. Radiologic findings were reported independently in a blind fashion by 2 authors. Data were presented as mean ± SD or frequency and percentage. Student t test or an unequal variance t test was used. Interobserver agreement among readings was assessed using κ statistic for categorical variables and intraclass Kendall tau-a correlations for continuous measures. P < 0.05 was considered to indicate statistical significance. The AE matched the SSC in only 31.3% of cases. The AE could be localized as lateral as 11.6 mm from the SSC. It was impossible to identify the AE in 33 scans (22.0%). SSC dehiscence was found in 5 cases (3.3%). A few millimeters separated most analyzed landmarks, and a wide variability in secondary measurements was observed. The AE does not systematically overlie the SSC and should not be routinely used as a reference to reach this structure in MCF surgery.

A new endoscopic minimal invasive approach for pudendal nerve and inferior cluneal nerve neurolysis: An anatomical study.

To describe a new minimal invasive approach of the gluteal region which will permit to perform neurolysis of the pudendal and cluneal nerves in case of perineal neuralgia due to an entrapment of these nerve trunks. Ten transgluteal approaches were performed on five cadavers. Relevant anatomic structures were dissected and further described. Neurolysis of the pudendal nerve or cluneal nerves were performed. Landmarks for secure intraoperative navigation were indicated. The first operative trocar for the camera was inserted with regards to the iliac crest in the deep gluteal space. With the aid of pneumodissection, the infragluteal plane was dissected. The piriformis muscle was identified as well as the sciatic and the posterior femoral cutaneous nerve. Consequently, the sciatic tuberosity was visualized together with the cluneal nerves. Hereafter, the second trocar was introduced caudal to the first one and placed on an horizontal line passing at the level of the coccyx, allowing access to the ischial spine and the visualization of the pudendal nerve and vessels. A third 5 mm trocar was then inserted medial from the first one, permitting to dissect and transsect the sacrospinous ligament. The pudendal nerve was subsequently transposed and followed on its course in the pudendal channel. A reliable exploration of the gluteal region including identification of the sciatic, pudendal, and posterior femoral cutaneous nerves is feasible using a minimal invasive transgluteal procedure. Consequently, the transposition of the pudendal nerve and the liberation of the cluneal nerves can be performed.

Quantitative and Qualitative Analysis of the Medial Patellar Ligaments: An Anatomic and Radiographic Study

Background: The qualitative and quantitative anatomy of the medial patellar stabilizers has been reported; however, a quantitative analysis of the anatomic and radiographic attachments of all 4 ligaments relative to anatomic and osseous landmarks, as well as to one another, has yet to be performed. Purpose: To perform a qualitative and quantitative anatomic and radiographic evaluation of the medial patellofemoral ligament (MPFL), medial patellotibial ligament (MPTL), medial patellomeniscal ligament (MPML), and medial quadriceps tendon femoral ligament (MQTFL) attachment sites, with attention to their relationship to pertinent osseous and soft tissue landmarks. Study Design: Descriptive laboratory study. Methods: Ten nonpaired fresh-frozen human cadaveric knees were dissected, and the MPFL, MPTL, MPML, and MQTFL were identified. A coordinate measuring device quantified the attachment areas of each structure and its relationship to pertinent bony landmarks. Radiographic analysis was performed through ligament attachment sites and relevant anatomic structures to assess their locations relative to pertinent bony landmarks. Results: Four separate medial patellar ligaments were identified in all specimens. The center of the MPFL attachments was 14.3 mm proximal and 2.1 mm posterior to the medial epicondyle and 8.3 mm distal and 2.7 mm anterior to the adductor tubercle on the femur and 8.9 mm distal and 19.9 mm medial to the superior pole on the patella. The MQTFL had a mean insertion length of 29.3 mm on the medial aspect of the distal quadriceps tendon. The MPTL and MPML shared a common patellar insertion and were 9.1 mm proximal and 15.4 mm medial to the inferior pole. The MPTL attachment inserted on a newly identified bony ridge, which was located 5.0 mm distal to the joint line. The orientation angles of the MPTL and MPML with respect to the patellar tendon were 8.3° and 22.7°, respectively. Conclusion: The most important findings of this study were the correlative anatomy of 4 distinct medial patellar ligaments (MPFL, MPTL, MPML, MQTFL), as well as the identification of a bony ridge on the medial proximal tibia that consistently served as the attachment site for the MPTL. The quantitative and radiographic measurements, while comparable with current literature, detailed the meniscal insertion of the MPML and defined a patellar insertion of the MPTL and the MPML as a single attachment. The data allow for reproducible landmarks to be established from previously known bony and soft tissue structures. Clinical Relevance: The findings of this study provide the anatomic foundation needed for an improved understanding of the role of medial-sided patellar restraints. This will help to further refine injury patterns and/or soft tissue deficiencies that result in lateral patellar instability, which can then be addressed with an anatomic-based reconstruction or repair technique and potentially lead to improved outcomes.

Commentary: Cone-Beam Computed Tomography: An Essential Technology for Management of Complex Periodontal and Implant Cases.

Commentary: Cone-Beam Computed Tomography: An Essential Technology for Management of Complex Periodontal and Implant Cases.

A Comprehensive Reanalysis of the Distal Iliotibial Band: Quantitative Anatomy, Radiographic Markers, and Biomechanical Properties

Background: The qualitative anatomy of the distal iliotibial band (ITB) has previously been described. However, a comprehensive characterization of the quantitative anatomic, radiographic, and biomechanical properties of the Kaplan fibers of the deep distal ITB has not yet been established. It is paramount to delineate these characteristics to fully understand the distal ITB’s contribution to rotational knee stability. Purpose/Hypothesis: There were 2 distinct purposes for this study: (1) to perform a quantitative anatomic and radiographic evaluation of the distal ITB’s attachment sites and their relationships to pertinent osseous and soft tissue landmarks, and (2) to quantify the biomechanical properties of the deep (Kaplan) fibers of the distal ITB. It was hypothesized that the distal ITB has definable parameters concerning its anatomic attachments and consistent relationships to surgically pertinent landmarks with correlating plain radiographic findings. In addition, it was hypothesized that the biomechanical properties of the Kaplan fibers would support their role as important restraints against internal rotation. Study Design: Descriptive laboratory study. Methods: Ten nonpaired, fresh-frozen human cadaveric knees (mean age, 61.1 years; range, 54-65 years) were dissected for anatomic and radiographic purposes. A coordinate measuring device quantified the attachment areas of the distal ITB to the distal femur, patella, and proximal tibia and their relationships to pertinent bony landmarks. A radiographic analysis was performed by inserting pins into the attachment sites of relevant anatomic structures to assess their location relative to pertinent bony landmarks with fluoroscopic guidance. A further biomechanical assessment of 10 cadaveric knees quantified the load to failure and stiffness of the Kaplan fibers’ insertion on the distal femur after a preconditioning protocol. Results: Two separate deep (Kaplan) fiber bundles were identified with attachments to 2 newly identified femoral bony prominences (ridges). The proximal and distal bundles inserted on the distal femur 53.6 mm (95% CI, 50.7-56.6 mm) and 31.4 mm (95% CI, 27.3-35.5 mm) proximal to the lateral epicondyle, respectively. The centers of the bundle insertions were 22.5 mm (95% CI, 19.1-25.9 mm) apart. The total insertion area of the distal ITB on the proximal tibia was 429.1 mm2 (95% CI, 349.2-509.1 mm2). A distinct capsulo-osseous layer of the distal ITB was also identified that was intimately related to the lateral knee capsule. Its origin was in close proximity to the lateral gastrocnemius tubercle, and it inserted on the proximal tibia at the lateral tibial tubercle between the fibular head and the Gerdy tubercle. Radiographic analysis supported the quantitative anatomic findings. The mean maximum load during pull-to-failure testing was 71.3 N (95% CI, 41.2-101.4 N) and 170.2 N (95% CI, 123.6-216.8 N) for the proximal and distal Kaplan bundles, respectively. Conclusion: The most important finding of this study was that 2 distinct deep bundles (Kaplan fibers) of the distal ITB were identified. Each bundle of the deep layer of the ITB was associated with a newly identified distinct bony ridge. Radiographic analysis confirmed the measurements previously recorded and established reproducible landmarks for the newly described structures. Biomechanical testing revealed that the Kaplan fibers had a strong attachment to the distal femur, thereby supporting a role in rotational knee stability. Clinical Relevance: The identification of 2 distinct deep fiber (Kaplan) attachments clarifies the function of the ITB more definitively. The results also support the role of the ITB in rotatory knee stability because of the fibers’ vectors and their identified maximum loads. These findings provide the anatomic and biomechanical foundation needed for the development of reconstruction or repair techniques to anatomically address these deficiencies in knee ligament injuries.

Comparative Anatomy of the Ovine and Female Pelvis

Background: Pelvic organ prolapse affects half of vaginally parous women. Several animal models are used to study its pathophysiology and treatment. Sheep are interesting because they develop spontaneously prolapse with similar risk factors as women and can be used for vaginal surgery. This study describes ovine pelvis anatomy and compares it to women's pelvis to provide anatomical tools for translational researchers. Methods: MRI, pelvic dissections, and histology were used for detailed macro- and microscopic analysis of relevant anatomical structures in 6 nulliparous ewes. Results: Although sheep are quadrupeds, the gross and microscopic anatomies are similar to the female pelvis. Principal differences are the shape and its orientation, the absence of the sacrospinous ligament and the internal obturator. The levator ani (except for the puborectalis) and the coccygeus muscle are present, yet the latter is more developed - coinciding with the tail. The dimensions and morphology of the ovine vagina is comparable. The retropubic and the rectovaginal space are accessible transvaginally. There is a wide expression of estrogen receptors with low or absent immunoreactivity in the urethral epithelium, bladder, anus and internal anal sphincter. Conclusion: The ovine pelvic floor has many anatomical and ultrastructural similarities to the female pelvic floor.

Multi-Parameter Ensemble Learning for Automated Vertebral Body Segmentation in Heterogeneously Acquired Clinical MR Images.

The development of quantitative imaging biomarkers in medicine requires automatic delineation of relevant anatomical structures using available imaging data. However, this task is complicated in clinical medicine due to the variation in scanning parameters and protocols, even within a single medical center. Existing literature on automatic image segmentation using MR data is based on the analysis of highly homogenous images obtained using a fixed set of pulse sequence parameters (TR/TE). Unfortunately, algorithms that operate on fixed scanning parameters do not avail themselves to real-world daily clinical use due to the existing variation in scanning parameters and protocols. Thus, it is necessary to develop algorithmic techniques that can address the challenge of MR image segmentation using real clinical data. Toward this goal, we developed a multi-parametric ensemble learning technique to automatically detect and segment lumbar vertebral bodies using MR images of the spine. We use spine imaging data to illustrate our techniques since low back pain is an extremely common condition and a typical spine clinic evaluates patients that have been referred with a wide range of scanning parameters. This method was designed with special emphasis on robustness so that it can perform well despite the inherent variation in scanning protocols. Specifically, we show how a single multi-parameter ensemble model trained with manually labeled T2 scans can autonomously segment vertebral bodies on scans with echo times varying between 24 and 147 ms and relaxation times varying between 1500 and 7810 ms. Furthermore, even though the model was trained using T2-MR imaging data, it can accurately segment vertebral bodies on T1-MR and CT, further demonstrating the robustness and versatility of our methodology. We believe that robust segmentation techniques, such as the one presented here, are necessary for translating computer assisted diagnosis into everyday clinical practice.

3D-Printed Simulation Device for Orbital Surgery

Orbital surgery is a challenging procedure because of its complex anatomy. Training could especially benefit from dedicated study models. The currently available devices lack sufficient anatomical representation and realistic soft tissue properties. Hence, we developed a 3D-printed simulation device for orbital surgery with tactual (haptic) correct simulation of all relevant anatomical structures. Based on computed tomography scans collected from patients treated in a third referral center, the hard and soft tissue were segmented and virtually processed to generate a 3D-model of the orbit. Hard tissue was then physically realized by 3D-printing. The soft tissue was manufactured by a composite silicone model of the nucleus and the surrounding tissue over a negative mold model also generated by 3D-printing. The final model was evaluated by a group of 5 trainees in oral and maxillofacial surgery (1) and a group of 5 consultants (2). All participants were asked to reconstruct an isolated orbital floor defect with a titanium implant. A stereotactic navigation system was available to all participants. Their experience was evaluated for haptic realism, correct representation of surgical approach, general handling of model, insertion of implant into the orbit, placement and fixation of implant, and usability of navigated control. The items were evaluated via nonparametric statistics (1 [poor]-5 [good]). Group 1 gave an average mark of 4.0 (±0.9) versus 4.6 (±0.6) by group 2. The haptics were rated as 3.6 (±1.1) [1] and 4.2 (±0.8) [2]. The surgical approach was graded 3.7 (±1.2) [1] and 4.0 (±1.0) [2]. Handling of the models was rated 3.5 (±1.1) [1] and 4 (±0.7) [2]. The insertion of the implants was marked as 3.7 (±0.8) [1] and 4.2 (±0.8) [2]. Fixation of the implants was also perceived to be realistic with 3.6 (±0.9) [1] and 4.2 (±0.45) [2]. Lastly, surgical navigation was rated 3.8 (±0.8) [1] and 4.6 (±0.56) [2]. In this project, all relevant hard and soft tissue characteristics of orbital anatomy could be realized. Moreover, it was possible to demonstrate that the entire workflow of an orbital procedure may be simulated. Hence, using this model training expenses may be reduced and patient security could be enhanced.