Drug Release Behavior Research Articles

Impact of Hot-Melt Extrusion on Glibenclamide's Physical and Chemical States and Dissolution Behavior: Case Studies with Three Polymer Blend Matrices.

This research work dives into the complexity of hot-melt extrusion (HME) and its influence on drug stability, focusing on solid dispersions containing 30% of glibenclamide and three 50:50 polymer blends. The polymers used in the study are Ethocel Standard 10 Premium, Kollidon SR and Affinisol HPMC HME 4M. Glibenclamide solid dispersions are characterized using thermal analyses (thermogravimetric analysis (TGA) and differential scanning calorimetry), X-ray diffraction and scanning electron microscopy. This study reveals the transformation of glibenclamide into impurity A during the HME process using mass spectrometry and TGA. Thus, it enables the quantification of the extent of degradation. Furthermore, this work shows how polymer-polymer blend matrices exert an impact on process parameters, the active pharmaceutical ingredient's physical state, and drug release behavior. In vitro dissolution studies show that the polymeric matrices investigated provide extended drug release (over 24 h), mainly dictated by the polymer's chemical nature. This paper highlights how glibenclamide is degraded during HME and how polymer selection crucially affects the sustained release dynamics.

Anti‐Inflammatory Drugs‐Modified Poly(2‐Hydroxyethyl Methacrylate) Particles as Anticancer Drug Carriers

AbstractIn this work, 2‐hydroxyethyl methacrylate (HEMA) is modified by ibuprofen and diclofenac as anti‐inflammatory drugs to synthesize ibuprofen‐HEMA and diclofenac‐HEMA monomers. Then, poly(ibuprofen‐HEMA‐co‐HEMA) (PIHH), poly(diclofenac‐HEMA‐co‐HEMA) (PDHH), and poly(2‐hydroxyethyl methacrylate) (PHEMA) particles are prepared by distillation precipitation polymerization. The morphology and size of the particles are investigated by dynamic light scattering (DLS) and field emission scanning electron microscopy (FE‐SEM). It is observed that all particles are spherical and with sizes of 298.3 nm for PHEMA, 178.8 nm for PDHH, and 85.2 nm for PIHH, respectively. Doxorubicin drug is loaded into the prepared particles and the drug release behavior is investigated for all the particles at two different pH values of 7.4 and 5.3. The release of the drug in acidic pH is higher due to the better solubility of DOX in acidic environment and the faster release of DOX molecules from nanocarriers. The toxicity of particles is also investigated and it is observed that by loading the drug into the PHEMA particles, the release of the drug causes fewer toxic effects than in the free state (drug without any nanocarrier), and the presence of ibuprofen and diclofenac in the particles, that is, PIHH and PDHH, led to a significant reduction in the cytotoxicity.

Preparation of bacterial cellulose/acrylic acid-based pH-responsive smart dressings by graft copolymerization method

Conventional wound dressings used in trauma treatment have a single function and insufficient adaptability to the wound environment, making it difficult to meet the complex demands of the healing process. Stimuli-responsive hydrogels can respond specifically to the particular environment of the wound area and realize on-demand responsive release by loading active substances, which can effectively promote wound healing. In this paper, BC/PAA-pH responsive hydrogels (BPPRHs) were prepared by graft copolymerization of acrylic acid (AA) to the end of the molecular chain of bacterial cellulose (BC) network structure. Antibacterial pH-responsive ‘smart’ dressings were prepared by loading curcumin (Cur) onto the hydrogels. Surface morphology, chemical groups, crystallinity, rheological, and mechanical properties of BPPRHs were analyzed by different characterization methods. The drug release behavior under different physiological conditions and bacteriostatic properties of BPPRH-Cur dressings were also investigated. The results of structural characterization and performance studies show that the hydrogel has a three-dimensional mesh structure and can respond to wound pH in a ‘smart’ drug release capacity. The drug release behavior of the BPPRH-Cur dressings under different environmental conditions conformed to the logistic and Weibull kinetic models. BPPRH-Cur displayed good antimicrobial activity against common pathogens of wound infections such as E. coli, S. aureus, and P. aeruginosa by destroying the cell membrane and lysing the bacterial cells. This study lays the foundation for the development of new pharmaceutical dressings with positive health, economic and social benefits.

A Mn-based metal-organic framework Mn-CPP for combined chemodynamic therapy and chemotherapy

A Mn-based metal-organic framework Mn-CPP was synthesized and showed excellent chemodynamic therapy (CDT) effect. DOX was selected and loaded into Mn-CPP obtaining DOX@Mn-CPP to improve the therapeutic properties. DOX@Mn-CPP exhibited better drug release behaviors in the tumor environment than that in normal environment. Besides, the material displayed good biocompatibility to L929 cells and significant effect of lethality on 4T1 cells and Hela cells. The successful fabrication of DOX@Mn-CPP provided the potential application for the combination therapy of chemodynamic therapy and chemotherapy.

Hydrogel coating containing heparin and cyclodextrin/paclitaxel inclusion complex for retrievable vena cava filter towards high biocompatibility and easy removal

Aiming to improve the retrieval rate of retrievable vena cava filters (RVCF) and extend its dwelling time in vivo, a novel hydrogel coating loaded with 10 mg/mL heparin and 30 mg/mL cyclodextrin/paclitaxel (PTX) inclusion complex (IC) was prepared. The drug-release behavior in the phosphate buffer solution demonstrated both heparin and PTX could be sustainably released over approximately two weeks. Furthermore, it was shown that the hydrogel-coated RVCF (HRVCF) with 10 mg/mL heparin and 30 mg/mL PTX IC effectively extended the blood clotting time to above the detection limit and inhibited EA.hy926 and CCC-SMC-1 cells' proliferation in vitro compared to the commercially available bare RVCF. Both the HRVCF and the bare RVCF were implanted into the vena cava of sheep and retrieved at at 2nd and 4th week after implantation, revealing that the HRVCF had a significantly higher retrieval rate of 67 % than the bare RVCF (0 %) at 4th week. Comprehensive analyses, including histological, immunohistological, and immunofluorescent assessments of the explanted veins demonstrated the HRVCF exhibited anti-hyperplasia and anticoagulation properties in vivo, attributable to the hydrogel coating, thereby improving the retrieval rate in sheep. Consequently, the as-prepared HRVCF shows promising potential for clinical application to enhance the retrieval rates of RVCFs.

Synthesis, Optimization and Molecular Self-Assembly Behavior of Alginate-g-Oleylamine Derivatives Based on Ugi Reaction for Hydrophobic Drug Delivery.

To achieve the optimal alginate-based oral formulation for delivery of hydrophobic drugs, on the basis of previous research, we further optimized the synthesis process parameters of alginate-g-oleylamine derivatives (Ugi-FOlT) and explored the effects of different degrees of substitution (DSs) on the molecular self-assembly properties of Ugi-FOlT, as well as the in vitro cytotoxicity and drug release behavior of Ugi-FOlT. The resultant Ugi-FOlT exhibited good amphiphilic properties with the critical micelle concentration (CMC) ranging from 0.043 mg/mL to 0.091 mg/mL, which decreased with the increase in the DS of Ugi-FOlT. Furthermore, Ugi-FOlT was able to self-assemble into spherical micellar aggregates in aqueous solution, whose sizes and zeta potentials with various DSs measured by dynamic light scattering (DLS) were in the range of 653 ± 25~710 ± 40 nm and -58.2 ± 1.92~-48.9 ± 2.86 mV, respectively. In addition, RAW 264.7 macrophages were used for MTT assay to evaluate the in vitro cytotoxicity of Ugi-FOlT in the range of 100~500 μg/mL, and the results indicated good cytocompatibility for Ugi-FOlT. Ugi-FOlT micellar aggregates with favorable stability also showed a certain sustained and pH-responsive release behavior for the hydrophobic drug ibuprofen (IBU). Meanwhile, it is feasible to control the drug release rate by regulating the DS of Ugi-FOlT. The influence of different DSs on the properties of Ugi-FOlT is helpful to fully understand the relationship between the micromolecular structure of Ugi-FOlT and its macroscopic properties.

A new intracellularly regulated release pattern controlled by coordinated carrier cracking and drug release

To further develop intracellular delivery systems of macromolecular drugs, understanding the cracking mechanisms and drug release behaviors of environment-responsive carriers, as well as their intrinsic linkages, is essential for achieving personalized or diversified delivery of macromolecular drugs. Herein, we designed a class of degradable dendritic mesoporous nanoparticles (DDMSNs), utilizing very large cavities and tetrasulfide bonds in the skeleton to achieve high drug loading and release within tumor cells. To comprehensively understand and develop intracellular drug delivery systems, this study delved deeper into the delivery of tetrasulfide-bonded DDMSNs, including chemical reactions, cracking kinetics, and release kinetics. First, the drug release of the DDMSNs within the cytoplasm was closely related to the chemical reaction of tetrasulfide bonds. Thus, based on experiments, the oxidation–reduction mechanism of tetrasulfide-bonded DDMSNs was explained, and the relationship was elaborated between cracking and drug release of the DDMSNs with different sulfur contents. To further explore this relationship, the cracking behavior, drug-loading capacity and release capacity of the DDMSNs was investigated with the different sulfur contents in different simulated environments, and in MDA-MB-231 cancer cells. Inspired by the reaction kinetic calculations, we analyzed the cracking and drug release behavior of the DDMSNs, and ultimately achieved dual cracking secondary drug release of the carriers by controlling the content of sulfur elements. Here, we report improved biomedical materials for advanced, customized, and intentional intracellular delivery of therapeutic macromolecules, in which theoretical calculations and experimental components were combined to study the mechanism of drug release influenced by carrier cracking, providing essential guidance for designing advanced drug delivery systems through a chemical engineering method.

Biological Fate Tracking of Nitric Oxide-Propelled Microneedle Delivery System Using an Aggregation-Caused Quenching Probe.

Nanoparticle-loaded dissolving microneedles (DMNs) have attracted increasing attention due to their ability to provide high drug loading, adjustable drug release behavior, and enhanced therapeutic efficiency. However, such delivery systems still face unsatisfied drug delivery efficiency due to insufficient driving force to promote nanoparticle penetration and the lack of in vivo fate studies to guide formulation design. Herein, an aggregation-caused quenching (ACQ) probe (P4) was encapsulated in l-arginine (l-Arg)-based nanomicelles, which was further formulated into nitric oxide (NO)-propelled nanomicelle-integrated DMNs (P4/l-Arg NMs@DMNs) to investigate their biological fate. The P4 probe could emit intense fluorescence signals in intact nanomicelles, while quenching with the dissociation of nanomicelles, providing a "distinguishable" method for tracking the fate of nanomicelles at a different status. l-Arg was demonstrated to self-generate NO under the tumor microenvironment with excessive reactive oxygen species (ROS), providing a pneumatic force to promote the penetration of nanomicelles in both three-dimensional (3D)-cultured tumor cells and melanoma-bearing mice. Compared with passive microneedles (P4 NMs@DMNs) without a NO propellant, the P4/l-Arg NMs@DMNs possessed a good NO production performance and higher nanoparticle penetration capacity. In conclusion, this study offered an ACQ probe-based biological fate tracking approach to demonstrate the potential of NO-propelled nanoparticle-loaded DMNs in penetration enhancement for topical tumor therapy.

PH-responsive IPN beads of carboxymethyl konjac glucomannan and sodium carboxymethyl cellulose as a controlled release carrier for ibuprofen

The convergence of polymer and pharmaceutical sciences has advanced drug delivery systems significantly. Carbohydrate polymers, especially carboxymethylated ones, offer versatile benefits for pharmaceuticals. Interpenetrating polymer networks (IPNs) combine synthetic and natural polymers to enhance drug delivery. The study aims to develop IPN beads using sodium carboxymethyl cellulose (SCMC) and carboxymethyl konjac glucomannan (CMKGM) for controlled release of ibuprofen (IB) after oral administration. Objectives include formulation optimization, characterization of physicochemical properties, evaluation of pH-dependent swelling and drug release behaviors to advance biocompatible and efficient oral drug delivery systems. The beads were analyzed using SEM, FTIR, DSC, and XRD techniques. Different ratio of polymers (CMKGM:SCMS) and crosslinker concentrations (2&4 %w/v) were used, significantly impacting bead size, swelling, drug encapsulation, and release characteristics. DSC results indicated higher thermal stability in IPN beads compared to native polymers. XRD revealed IB dispersion within the polymer matrix. IPN beads size ranged from 580 ± 0.56 to 324 ± 0.27 μm, with a nearly spherical shape. IPN beads exhibited continuous release in alkaline conditions (pH 7.4) and minimal release in acidic media (pH 1.2). These findings suggest that the formulated IPN beads can modulate drug release in both acidic and alkaline environments, potentially mitigating the gastric adverse effects often associated with oral administration of IB.

99mTc-labeled, tofacitinib citrate encapsulated chitosan microspheres loaded in situ gel formulations for intra-articular treatment of rheumatoid arthritis.

Inflammatory diseases including rheumatoid arthritis are major health problems. Although different techniques and drugs are clinically available for the diagnosis and therapy of the disease, novel approaches regarding radiolabeled drug delivery systems are researched. Hence, in the present study, it was aimed to design, prepare, and characterize 99mTc-radiolabeled and tofacitinib citrate-encapsulated microsphere loaded poloxamer in situ gel formulations for the intra-articular treatment. Among nine different microsphere formulations, MS/TOFA-9 was chosen as the most proper one due to particle size, high encapsulation efficiency, and in vitro drug release behavior. Poloxamer 338 at a concentration of 15% was used to prepare in situ gel formulations. For intra-articular administration, microspheres were dispersed in an in situ gel containing 15% Poloxamer 338 and characterized in terms of gelation temperature, viscosity, rheological, mechanical, and spreadability properties. After the determination of the safe dose for MS/TOFA-9 and PLX-MS/TOFA-9 as 40 µL/mL in the cell culture study performed on healthy cells, the high anti-inflammatory effects were due to significant cellular inhibition of fibroblasts. In the radiolabeling studies with 99mTc, the optimum radiolabeling condition was determined as 200 ppm SnCl2 and 0.5 mg ascorbic acid, and both 99mTc-MS/TOFA-9 and 99mTc-PLX-MS/TOFA-9 exhibited high cellular binding capacity. In conclusion, although further in vivo experiments are required, PLX-MS/TOFA-9 was found to be a promising agent for intra-articular injection in rheumatoid arthritis.

Emulsion-Based Multi-Phase Integrated Microbeads with Inner Multi-Interface Structure Enable Dual-Modal Imaging for Precision Endovascular Embolization.

Microsphere-based embolic agents have gained prominence in transarterial embolization (TAE) treatment, a critical minimally invasive therapy widely applied for a variety of diseases such as hypervascular tumors and acute bleeding. However, the development of microspheres with long-term, real-time, and repeated X-ray imaging as well as ultrasound imaging remains challenging. In this study, emulsion-based dual-modal imaging microbeads with a unique internal multi-interface structure is developed for TAE treatment. The embolic microbeads are fabricated from a solidified oil-in-water (O/W) emulsion composed of crosslinked CaAlg-based aqueous matrix and dispersed radiopaque iodinated oil (IO) droplets through a droplet-based microfluidic fabrication method. The CaAlg-IO microbeads exhibit superior X-ray imaging visibility due to the incorporation of exceptionally high iodine level up to 221 mgImL-1, excellent ultrasound imaging capability attributed to the multi-interface structure of the O/W emulsion, great microcatheter deliverability thanks to their appropriate biomechanical properties and optimal microbead density, and extended drug release behavior owing to the biodegradation nature of the embolics. Such an embolic agent presents a promising emulsion-based platform to utilize multi-phased structures for improving endovascular embolization performance and assessment capabilities.

Dynamic Covalent Boronic-Acid-Functionalized Alginate/PVA Hydrogels for pH and Shear-Responsive Drug Delivery.

Herein, we investigated hydrogels composed of boronic-acid-functionalized alginate and blended with polyvinyl alcohol (PVA) of different molecular weights to control the release of metoclopramide hydrochloride as a function of pH and shear stress. The functionalization of alginate introduced dynamic covalent bonding and pH-responsive properties that can modulate network connectivity. The study investigated the viscoelastic properties of the hydrogels, their drug release profiles, and their responsiveness to changes in pH and shear forces. The results showed that a higher PVA molecular weight and alkaline pH conditions increased hydrogel viscosity and stiffness due to a more stable and interconnected network structure than acidic pH. Metoclopramide release revealed that the hydrogels exhibited pH-responsive drug release behavior. The drug was more readily released under acidic conditions due to the instability of sp2-hybridized boronate ester bonds. The influence of shear forces on the release of metoclopramide was also investigated at shear rates of 1, 10, and 100 s-1, revealing their effect on matrix stiffening. Research shows that AlgBA/PVA hydrogels have unique properties, such as dynamic covalent bonding, that make them sensitive to external mechanical forces. This sensitivity makes them ideal for applications where physiological conditions trigger drug release.

A pH and near-infrared light dual-responsive drug delivery system based on TiO2 nanotube arrays modified with polydopamine and Fe3+

This paper reports a novel drug delivery system based on TiO2 nanotube arrays (TNTs) modified with polydopamine (PDA) and Fe3+, which can load and release alendronate (NaAL), a drug for osteoporosis treatment, in a pH-responsive and near-infrared light-triggered manner. The samples were characterized by electron scanning microscopy(SEM/EDS), Fourier Transform infrared spectroscopy(FTIR), X-ray diffraction(XRD), X-ray Photoelectron Spectroscopy(XPS) and Thermogravimetry(TG). The drug release behavior of the samples was investigated under different pH and light conditions. The results showed that the TNTs-PDA-Fe3+ had improved drug loading capacity compared with the TNTs and TNTs-PDA. The drug release was pH-responsive and near-infrared light-triggered, the drug release from the sample with a pH of 4.6 was much greater than the pH of 11 and 7.4, and the photothermal conversion effificiency of TNTs-PDA-Fe3+-NaAL was 32.9 %. The drug release mechanism was attributed to the coordination bond between Fe3+ and NaAL, and the photothermal effect of the PDA. The cytotoxicity and biocompatibility of the samples were evaluated by MTT assay using mouse embryonic osteoblasts cells. The results indicated that the samples had no obvious cytotoxicity and could promote the cell proliferation and differentiation. The paper concludes that the TNTs-PDA-Fe3+-NaAL system is a potential implantable drug delivery platform for bone-related diseases.

Reduction-Responsive Polyprodrug Nanoplatform Based on Curcumin for Tumor-Targeted Therapy.

Polymer prodrug nanoparticles have become an emerging drug delivery system in cancer therapy due to their high drug loading. However, their poor drug release and lack of tumor cell targeting limit their clinical application. This study aimed to prepare targeted and reduction-reactive polyprodrug nanocarriers based on curcumin (CUR) for co-delivery of doxorubicin (DOX), labeled as DOX/HAPCS NPs, and to investigate their anticancer activity. The polymer was synthesized and characterized by chemical method. The drug loading and drug release behavior of DOX and CUR in polymer nanoparticles were determined. Moreover, the antitumor effects of polymer nanoparticles were evaluated using an MTT experiment and tumor inhibition experiment, and the synergistic effect of co-delivered DOX and CUR was explored. The particle size of DOX/HAPCS NPs was 152.5nm, and the potential was about -26.74 mV. The drug-carrying capacity of DOX and CUR was about 7.56% and 34.75%, respectively, indicating high drug-carrying capacity and good stability. DOX and CUR released over 90% within 24 hours in the tumor environment. Compared with free DOX, DOX/HAPCS NPs demonstrated significantly enhanced cell and tumor inhibitory effects (P< 0.05) in vivo and in vitro and changed drug distribution to avoid toxic side effects on normal tissues. The combined index showed that DOX and CUR showed synergistic anticancer effects at a set ratio. The prepared reduction-responsive targeted polymer nanomedical DOX/HAPCS NPs exhibited a synergistic anti-cancer effect, with high drug loading capacity and the ability to release drugs in proportion, making it a promising polymer nanoparticle drug delivery system.

Unravelling poly(1-vinyl-1,2,4-triazole) hydrogels behaviors and enhancing 5-Fluorouracil delivery systems by utilizing a fuzzy modelling approach

In recent years, fuzzy-hybrid systems have been reported in biomedical applications due to their ability to handle uncertainties, provide flexibility, identify optimal production processes, and integrate experimental data sources to create reliable decision support mechanisms. This study focuses on introducing a fuzzy-hybrid methodology to model the swelling behavior of poly(1-vinyl-1,2,4-triazole) (PVTAz) hydrogels and the drug release profile of PVTAz hydrogels loaded with 5-Fluorouracil. The proposed fuzzy-hybrid approach was utilized in modelling swelling behavior of the PVTAz hydrogels as a fuzzy function of time, temperature, pH, and the drug release behavior as a fuzzy function of time only. All the obtained models were illustrated with respect to the experimental data, showing their effectiveness and applicability. Performance metrics (ARE, RMSE, R2) were calculated for the fuzzy-hybrid supported swelling behavior and drug release models: (ARE = 6.9492, RMSE = 150.59, R2 = 0.9529) and (ARE = 4.2956, RMSE = 2.2889, R2 = 0.9879), respectively. This study significantly advances our understanding of hydrogel behaviors in drug delivery systems, highlighting interdisciplinary synergy that enhances research outcomes.

Biodegradable Magnetic Vesicles for Magnetic Hyperthermia Stimulated Drug Release

AbstractMagnetic nanomaterials have emerged as an effective drug‐delivery platform for targeted imaging and therapy. However, it remains challenging to fabricate biodegradable magnetic nanoparticles with controllable drug release behaviors and strong magnetic responsiveness. Here an asiaticoside‐loaded biodegradable magnetic vesicle is developed based on the self‐assembly of amphiphilic block copolymer tethered superparamagnetic iron oxide nanoparticles. Thanks to the collective properties, the magnetic vesicles show stronger magnetic responsiveness than individual nanoparticles. Additionally, the magnetic vesicles are dissociated within weeks owing to the biodegradable polymer backbone, which can significantly improve the long‐term biocompatibility of the nanomaterials. The asiaticoside‐loaded magnetic vesicles can readily release the payloads in an alternating magnetic field, likely due to the rising local temperature over the phase transition temperature of the polymers attached on nanoparticles. This work provides new insights into the design and construction of biodegradable magnetic nanomedicines for targeted drug delivery.

Cross-linker engineered poly(hydroxyethyl methacrylate) hydrogel allows photodynamic and photothermal therapies and controlled drug release

Here, we disclose the synthesis of poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels incorporating a squaraine dye (Sq) as a chemical crosslinker, viz. Sq@PHEMA. Photothermal and photodynamic features of Sq@PHEMA hydrogels are evaluated in detail. It is noteworthy that Sq@PHEMA induces hyperthermia upon irradiation with an 808 nm laser. Furthermore, Sq@PHEMA enables the generation of reactive oxygen species (ROS) upon irradiation with red light. To our delight, Sq@PHEMA hydrogels can be used as efficient dual photosensitizers pertinent to both PDT and PTT simultaneously. Finally, the hydrogels are loaded with methotrexate (MTX) to investigate controlled drug release behavior. It is noted that Sq@PHEMA hydrogels are promising candidates as drug delivery systems since on-demand MTX release is feasible upon irradiation. In summary, we effectively demonstrate that hydrogel cross-linker engineering allows for synergistic photodynamic and photothermal therapy. Furthermore, drug delivery is also feasible with the Sq@PHEMA core.

PH and temperature dual-responsive magnetic yolk-shell mesoporous silica nanoparticles for controlled drug delivery

New magnetic yolk-shell mesoporous silica nanoparticles (Fe3O4@V-mSiO2-PNVCL) were prepared by grafting temperature-sensitive amino-terminated poly (N-vinylcaprolactam) (PNVCL-NH2) on the surface of aldehyde-functionalized magnetic mesoporous silica nanoparticles (Fe3O4@V-mSiO2-CHO) through a Schiff base reaction. Various characterizations were used to confirm the structures, and the drug loading and release behaviors were studied. The drug loading was achieved as PNVCL stretched at room temperature and the drug loading content was up to 54.7% due to the large cavities. The encapsulation of drug from leakage in the blood environment was realized as PNVCL collapsed at physiological temperature. The fracture of pH-liable imine bonds in a slightly acidic tumor environment triggered the burst release of cargo. The Fe3O4@V-mSiO2-PNVCL showed super paramagnetic behavior (21.01 emu∙g−1) which could achieve magnetic targeting. The MTT assay confirmed that the nanoparticles exhibited low cytotoxicity. Furthermore, the cellular uptake experiments indicated that DOX-loaded nanoparticles were successfully internalized into cancer cells. Therefore, the composite nanoparticles are ideal choices for drug carriers.

A lignocellulose nanofibril-poly(vinyl alcohol) hydrogel with controlled drug delivery for wound healing

Employing lignocellulosic nanofibers (LCNF) with natural, high specific mechanical performance and abundant functional groups to design a hydrogel as a drug-sustained release carrier, which conforms to the concept of green and sustainable development. Herein, we facilely extracted carboxylated lignocellulose nanofibrils (CLCNF) from bagasse via a deep eutectic solvent (DES) and mechanical defibrillation-based strategy. The CLCNF was crosslinked with poly(vinyl alcohol) (PVA) to obtain a nanocomposite hydrogel (PVA/CLCNF/B) whereupon the mechanical strength and drug release behavior were improved in the process. Consequently, the lignocellulose nanocomposite hydrogel presented a high compression modulus (3.92 MPa) and significant sustained-release effect with a release rate of 80.73 % after 336 h. The delivery behavior of the PVA/CLCNF/B composite hydrogel could be controlled by acidic pH conditions. The TH release kinetics of PVA/CLCNF/B hydrogel in different phosphate buffer saline (PBS) followed the Korsmeyer-Peppas model better, and the release of TH occurred through the Fickian diffusion mechanism. Importantly, in vivo experiments and histopathological studies showed that TH-loaded PVA/CLCNF/B hydrogel had a superior pro-healing rate. Overall, the incorporation of CLCNF into a hydrogel may have considerable potential as a drug delivery carrier for drug release and therapy. SynopsisAdding the CLCNF from bagasse into PVA dispersions obtained a hydrogel for pH-responsive drug delivery can accelerate wound healing.

Targeted redox-responsive peptide for arterial chemoembolization therapy of orthotropic hepatocellular carcinoma

ObjectiveTranscatheter Arterial Chemoembolization (TACE) is the first choice for the treatment of advanced-stage hepatocellular carcinoma (HCC). However, TACE suffers from a lack of specificity and rapid drug release. Herein, a targeted redox-responsive peptide (TRRP) was synthesized and used as a carrier of doxorubicin (DOX) to enhance the efficacy of TACE through tumor cells targeting and controlled drug release.MethodsTRRP has a high loading capacity of DOX and a sensitive drug release behavior at high glutathione (GSH) concentration. Moreover, TRRP could bind to the transferrin receptor on the surface of tumor cells, which enhanced the efficacy of TACE and reduced side effects of TACE. TACE with TRRP@DOX dispersed in lipiodol shows an enhanced therapeutic outcome compared to the treatment with DOX + lipiodol emulsion in orthotopic rat HCC models.ResultsTRRP has a high loading capacity of DOX and a sensitive drug release behavior at GSH concentration. Moreover, TRRP could bind to the transferrin receptor on the surface of tumor cells, which enhanced the efficacy of TACE and reduced side effects of TACE. TACE with TRRP@DOX dispersed in lipiodol shows an enhanced therapeutic outcome compared to the treatment with DOX + lipiodol emulsion in orthotopic rat HCC models.ConclusionsThis study demonstrated that TRRP was a promising therapeutic agent for enhancing TACE therapy for HCC treatment.Graphical abstract