Heavy Ion Research Articles

The charge balance function with HYDJET++ model in heavy ion collisions at LHC

The charge balance function with HYDJET++ model in heavy ion collisions at LHC

Microstructural Evaluation and Linkage to the Engineering Properties of Metal-Ion-Contaminated Clay

The rapid progress of urbanization and industrialization has led to the accumulation of large amounts of metal ions in the environment. These metal ions are adsorbed onto the negatively charged surfaces of clay particles, altering the total surface charge, double-layer thickness, and chemical bonds between the particles, which in turn affects the interactions between them. This causes changes in the microstructure, such as particle rearrangement and pore morphology adjustments, ultimately altering the mechanical behavior of the soil and reducing its stability. This study explores the effects of four common metal ions, including monovalent alkali metal ions (Na+, K+) and divalent heavy metal ions (Pb2+, Zn2+), with a focus on how ion valence and concentration impact the soil’s microstructure and mechanical properties. Microstructural tests show that metal ion incorporation reduces particle size, increases clay content, and transforms the structure from layered to honeycomb-like. Small pores decrease while large pores dominate, reducing the specific surface area and pore volume, while the average pore size increases. Although cation exchange capacity decreases, cation adsorption density per unit surface area increases. Monovalent ions primarily disperse the soil structure, while divalent ions induce coagulation. Macro-mechanical tests reveal that metal ion contamination reduces porosity under loading, with compressibility rises as the ion concentration increases. Soils contaminated with alkali metal ions shows higher compression coefficients at all loads, while heavy metal ions cause higher compression under lower loads. Shear strength, the internal friction angle, and cohesion in metal-ion-contaminated clay decrease compared to uncontaminated field-state clay, with greater declines at higher ion concentrations. The Micropore Morphology Index and hydro-pore structural parameter effectively characterize both micro- and macrostructural properties, establishing a quantitative relationship between HPSP and the engineering properties of metal-ion-contaminated clay.

Waste refractory brick material added chitosan/oxidized pullulan complex gel production and removal of heavy metals from waste water

Wastewater is a by-product of numerous industrial processes that have been demonstrated to have adverse effects on human and natural health due to the pollutants it contains. The pollutants in these substances are organic or inorganic molecules and heavy metal ions that significantly harm the environment and human health. A variety of techniques have been devised for the removal of heavy metal ions from wastewater. The adsorption process has attracted significant attention due to its straightforward implementation, cost-effectiveness, and the environmentally friendly production of adsorbent materials using biocompatible substances. In this study, the removal of Cu2+ ions from wastewater was conducted using chitosan pullulan, a biocompatible and biodegradable polymer. In addition to chitosan and pullulan, waste refractory materials from a furnace used in iron and steel production were added to these polymer materials to increase the adsorption capacity. The initial step involved grinding the waste refractory brick material. Subsequently, chitosan was dissolved in acetic acid. After that, the refractory material was suspended in this solution, facilitating the formation of hydrogel beads using a NaOH solution. The obtained hydrogels were coated with pullulan to produce polyelectrolyte gel. Pullulan was oxidized to 6-carboxypullulan by the TEMPO (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl) oxidation method and the negatively charged groups in its structure interacted with the positively charged groups in the chitosan structure to produce a complex gel. The chemical structure, morphological analysis, thermal analysis, and water release analysis of the produced waste refractory brick material added chitosan/oxidized pullulan complex gels were examined. The impact of the 6-carboxypullulan coating on the gels’ properties was elucidated. Furthermore, the adsorption of Cu2⁺ was conducted using solutions containing 100, 500, and 1000 ppm Cu2⁺ ions. It has been observed that the material can clean water with over 98% efficiency, even in solutions that exceed the standards set for wastewater. The material’s efficacy in cleaning solutions with concentrations above the standard for wastewater cleaning is evidence of its high performance. Furthermore, the kinetics and isotherm of the adsorption reaction were examined. The kinetics were determined to be consistent with the Pseudo Second Order (chemical reaction controlled) and aligned with the Langmuir and Freundlich Isotherm (mixed adsorption occurred on homogeneous and heterogeneous surfaces).

Green and Mild Fabrication of Magnetic Poly(trithiocyanuric acid) Polymers for Rapid and Selective Separation of Mercury(II) Ions in Aqueous Samples

The removal and detection of highly toxic mercury(II) ions (Hg2+) in water used daily is essential for human health and monitoring environmental pollution. Efficient porous organic polymers (POPs) can provide a strong adsorption capacity toward heavy metal ions, although the complex synthetic process and inconvenient phase separation steps limit their application. Hence, a combination of POPs and magnetic nanomaterials was proposed and a new magnetic porous organic polymer adsorbent was fabricated by a green and mild redox reaction in the aqueous phase with trithiocyanuric acid (TA) and its sodium salts acting as reductive monomers and iodine acting as an oxidant. In the preparation steps, no additional harmful organic solvent is required and the byproducts of sodium iodine are generally considered to be non-toxic. The resulting magnetic poly(trithiocyanuric acid) polymers (MPTAPs) are highly porous, have large surface areas, are rich in sulfhydryl groups and show easy magnetic separation ability. The experimental results show that MPTAPs exhibit good adsorption affinity toward Hg2+ with high selectivity, rapid adsorption kinetics (10 min), a large adsorption capacity (211 mg g−1) and wide adsorption applicability under various pH environments (pH 2~8). Additionally, MPTAPs can be reused for up to 10 cycles, and the magnetic separation step of MPTAPs is fast and convenient, reducing energy consumption compared to centrifugation and filtration steps required for non-magnetic adsorbents. These results demonstrate the promising capability of MPTAPs as superior adsorbents for effective adsorption and separation of Hg2+. Based on this, the prepared MPTAPs were adopted as magnetic solid-phase extraction (MSPE) materials for isolation of trace Hg2+ from aqueous samples. Under optimized conditions, the extraction and quantification of trace Hg2+ in water samples were accomplished using inductively coupled plasma mass spectrometry (ICP-MS) detection after MSPE procedures. The proposed MPTAPs-based MSPE-ICP-MS method is efficient, rapid, sensitive and selective for the determination of trace Hg2+, and was successfully employed for the accurate analysis of trace Hg2+ in tap water, wastewater, lake water and river water samples.

Poly (acrylic acid-co-2-hydroxyethyl methacrylate)-grafted gum ghatti hydrogel for capturing heavy metal ions

In this work, a facile route is explored for the synthesis of a novel polymer composite-based hydrogel (PC-hydrogel). The ratio of 2-(Hydroxyethyl) methacrylate (HEMA) and acrylic acid (AA) is optimized first based on Fourier transform infra-red spectroscopy, swelling ratio (SR%) and surface negative charge (PZC). Results indicate that PC-hydrogel composed of copolymer of HEMA: AA in 1:4 ratio is optimized, for grafting on Gum ghatti (Gg) during free-radical graft copolymerization process. Among all other possible combination of HEMA: AA, 1:4 ratio grafted Gg is termed as PC-hydrogel [Poly (AA-co-HEMA)-g-Gg]. PC-hydrogel exhibited negative surface charge over a wide range of pH owing to increase in AA. The swelling (g/g) and water retention ratio (%) of the prepared hydrogel have been found to be 342.6, 385 & 412.6 g/g and 74.83, 65.30 & 57.86 % in grey, tap and distilled water respectively. Furthermore, PC-hydrogel is applied for capturing Cu2+ and Co2+ ions in aqueous phases. Experimental results showed that adsorption process was pH-dependent, and the maximum capturing of Cu2+ and Co2+ was observed at neutral pH 7. Among different adsorption isotherms models like Langmuir, Freundlich, and Temkin models, experimental data fitted closely with the Langmuir adsorption model showing a maximum adsorption capacity of 381.67 and 328.94 mg/g for Cu2+ and Co2+ respectively. The capturing of metal ion followed pseudo-second-order rate model [rate constant k = 1.7 x 10−4 for Cu2+ and 1.5 x 10−4 for Co2+ g/(mg.min)]. The PC-hydrogel property retained its uptake capacity of metal ions up to the three successive adsorption−desorption cycles, and exhibited higher selectivity towards Cu2+ and Co2+ and other (NaCl, MgCl2, CaCl2) coexisting ions.

A Facile Synthesis of RGO-Ag2MoO4 Nanocomposites for Efficient Lead Removal from Aqueous Solution

Efficiently treating wastewater, particularly the elimination of heavy metal ions from water systems, continues to be one of the most pressing and complex challenges in modern environmental management. In this work, reduced graphene oxide coupled silver molybdate binary nanocomposites (RGO-Ag2MoO4 NCs) have been prepared via hydrothermal method. The crystalline nature and surface properties of the developed RGO-Ag2MoO4 NCs were proved by XRD, FTIR, SEM, and EDS techniques. Adsorption experiments demonstrated that the nanocomposites (NCs) effectively removed Pb(II) ions within 120 min, achieving a maximum removal efficiency ranging from 94.96% to 86.37% for Pb(II) concentrations between 20 and 100 mg/L at pH 6. Kinetic studies showed that the adsorption process followed a pseudo-second order model. Isotherm analysis presented that the Langmuir model provided the greatest fit for the equilibrium data, with a monolayer adsorption capacity of 128.94 mg/g. Thermodynamic analysis revealed that the adsorption process was spontaneous and endothermic. The results of this study highlight RGO-Ag2MoO4 NCs as a highly promising and eco-friendly material for the effective elimination of Pb(II) ions from wastewater. Their strong adsorption capacity, coupled with sustainable properties, makes them an efficient solution for addressing lead contamination, offering significant potential for practical applications in water treatment systems.

Relativistic diffusion model for hadron production in p -Pb collisions at energies available at the CERN Large Hadron Collider

We investigate charged-hadron production in relativistic heavy-ion collisions of asymmetric systems within a nonequilibrium-statistical framework. Calculated centrality-dependent pseudorapidity distributions for p-Pb collisions at sNN=5.02 and 8.16 TeV are compared with data from the Large Hadron Collider. Our approach combines a relativistic diffusion model with formulations based on quantum chromodynamics while utilizing numerical solutions of a Fokker-Planck equation to account for the shift and broadening of the fragmentation sources for particle-production with respect to the stopping (net-baryon) rapidity distributions. To represent the centrality dependence of charged-hadron production in asymmetric systems over a broad region of pseudorapidities, the consideration and precise modeling of the fragmentation sources, along with the central gluon-gluon source, is found to be essential. Specifically, this results in an inversion of the particle-production amplitude from backward to forward dominance when transitioning from central to peripheral collisions, in agreement with recent ATLAS and ALICE p-Pb data at sNN=5.02TeV. Published by the American Physical Society 2024

Heavy Ion Escape at Mars during the Disappearing Solar Wind Event in 2022 December

A unique event known as the disappearing solar wind (DSW), characterized by an extremely low-density solar wind stream, occurred at Mars on 2022 December 26–27. As this stream flowed past Mars, several properties of the Mars–solar wind interaction changed in response to the density drop. We utilize in situ plasma measurements from the Mars Atmosphere and Volatile EvolutioN spacecraft to examine heavy ion escape during this event. We find that escaping ions with energies above and below 30 eV responded differently to the reduction in solar wind density. High-energy ions experienced a decrease in flux, whereas low-energy ions experienced an increase, regardless of whether they were escaping through the plume or tailward channel. Furthermore, we observe a net reduction in the flux of plume escaping ions during the DSW period, primarily due to a considerable reduction in the high-energy component, which typically dominates plume escape. In contrast, the overall flux of tailward escaping ions increased during this period. These variations in heavy ion escape are mainly attributed to substantial reductions in solar wind dynamic pressure and momentum density. This paper provides new insights into the dynamics of heavy ion escape under an exceptional state of the Mars–solar wind interaction.

Beam Dynamics in the Heavy Ion Injector LU2 for the Synchrotron Research Complex (SRC)

The project of the complex for studying ionizing radiation exposure from outer space based on the synchrotron accelerator of protons and various types of ions up to 209Bi is being developed at the Russian Federal Nuclear Center - All-Russian Research Institute ofExperimental Physics (FSUE RFNC - VNIIEF). The accelerator includes two injection complexes (one of which is the source of protons and light ions, the second - heavy ions), the booster accelerator and the main synchrotron. The pulsed type heavy ions linac is being developed at the NRC “Kurchatov Institute” - KCTEF (Kurchatov Complex for Theoretical and Experimental Physics). The ions with mass-to-charge ratio 4÷8 with current of 10 mA will be accelerated up to 4 MeV/u. The linac is proposed, including the RFQ and two DTL sections operating at multiple frequencies. Each DTL section is modular and consists of individually phased H-type resonators (IH-DTLs). Quadrupole lenses located between the resonators for the beam focusing. This DTL structure ensures the accelerator compactness and allows section-by-section configuration and sequential commissioning. 6D beam matching between all sections of the linac is carried out. The results ofbeam dynamics simulation in linear accelerator are presented.

NMR Relaxometry to Monitor InSitu the Loading of Amberlite IR120 and Dowex Marathon MSC Resins With Ni2+ and Cu2+ During a Column Experiment.

The removal of heavy metal ions from wastewater often necessitates the use of ion exchange resins. Current methods for assessing ion exchange efficiency are indirect and destructive. Some heavy metal ions, such as Cu2+ and Ni2+, are paramagnetic and influence the NMR relaxation times of water protons. NMR relaxometry can therefore be utilized to track the removal of these ions by ion exchange resins. In this study, we use relaxometry to monitor insitu the loading with Ni2+ and Cu2+ of Amberlite IR120 and Dowex Marathon MSC resins, with the resin column inserted into a low-field NMR device. The multiexponential transverse relaxation curves were fitted using a biexponential model. Before and during the loading of the resin, the water with the slowest relaxation corresponds to treated water (free of Ni2+ or Cu2+) flowing between the resin beads. After saturation, the slowest fraction corresponds to the untreated solution (containing Ni2+ or Cu2+) flowing between the resin beads saturated with paramagnetic ions. The evolution with time of the transverse relaxation rate and the amplitude of the slowly relaxing water fraction shows a clear transition, occurring later at the bottom of the resin bed compared with the middle and top. This is interpreted as an indication of the saturation of the studied zone with paramagnetic ions, confirmed by the quantification of Ni2+ or Cu2+ in the effluent using AES spectroscopy. This proof-of-concept study demonstrates that NMR relaxometry can be used insitu to monitor the loading of a resin bed with paramagnetic ions.

Extraction of nickel ions using nanoporous adsorbent material from waste glass

This study aims to create a porous glass adsorbent from waste glass to extraction nickel ions from its aqueous solution. The process involves converting waste glass to porous glass using 1:1:1:1 lime, sodium chloride, and sodium bicarbonate, followed by reacting with waste glass at 800 ˚C. The porous glass surface morphology, elemental composition, and functional groups, were analyzed using SEM, EDS, and FT-IR techniques.The outcome parameters used in this study are adsorbent dosage (10 g), contact time (150 min), heavy metal ion concentration (100 mg/l), and pH of 6. The adsorption capacity resulting from these parameters is 9.28 mg/g using the porous extract adsorbent for the extraction of nickel ions from its solutions. According to the findings. The proportion of Ni (II) ions extracted increased, coupled with a rise in the adsorbent dosage, heavy metal ion concentration, contact time, and pH. In addition, the Langmuir isotherm (R2 = 0.98,KL=0.072) has shown better performance than the Freundlich adsorption isotherm (R2 = 0.93,N=1.598) for the adsorption of the Ni(II) in this study.

Appearance of the hindrance to complete fusion in heavy-ion collisions

Appearance of the hindrance to complete fusion in heavy-ion collisions

Hydrodynamization and resummed viscous hydrodynamics

In this paper, I review our current understanding of the applicability of hydrodynamics to modeling the quark–gluon plasma (QGP), focusing on the question of hydrodynamization/thermalization of the QGP and the anisotropic hydrodynamics (aHydro) far-from-equilibrium hydrodynamic framework. I discuss the existence of far-from-equilibrium hydrodynamic attractors and methods for determining attractors within different hydrodynamical frameworks. I also discuss the determination of attractors from exact solutions to the Boltzmann equation in relaxation time approximation and effective kinetic field theory applied to quantum chromodynamics. I then present comparisons of the kinetic attractors with the attractors obtained in standard second-viscous hydrodynamics frameworks and aHydro. I demonstrate that, due to the resummation of terms to all orders in the inverse Reynolds number, the aHydro framework can describe both the weak- and strong-interaction limits. I then review the phenomenological application of aHydro to relativistic heavy-ion collisions using both quasiparticle aHydro and second-order viscous aHydro. The phenomenological results indicate that aHydro provides a controlled extension of dissipative relativistic hydrodynamics to the early-time far-from-equilibrium stage of heavy-ion collisions. This allows one to better describe the data and to extract the temperature dependence of transport coefficients at much higher temperatures than linearized second-order viscous hydrodynamics.

Integration of Metal‐Organic Frameworks into Hydrogels: Optimizing Their Properties and Applications

In recent years, MOFs hydrogels have attracted extensive attention due to their unique structure and excellent performance. MOF‐based hydrogels combine the highly ordered pore structure and tunability of MOF with the biocompatibility and flexibility of hydrogels, and are widely used in environmental governance, sensors, and biomedicine. In this review, we mainly summarize the synthesis methods, structural characteristics and mechanical properties of MOF‐based hydrogels, and the specific applications of MOF‐based hydrogels in different fields including adsorption of heavy metal ions and pollutant gases stress strain sensor and drug delivery. Finally, we analyze the existing problems, and provide suggestions for the development direction of MOF‐based hydrogels in the future. This paper aims to help readers quickly understand the current development of MOF‐based hydrogels.

A low-cost bio-based cellulose composite hydrogel with cross-linked structures for efficient capture of heavy metal ions

A low-cost bio-based cellulose composite hydrogel with cross-linked structures for efficient capture of heavy metal ions

Holographic Gubser flow. A combined analytic and numerical study

Gubser flow is an evolution with cylindrical and boost symmetries, which can be best studied by mapping the future wedge of Minkowski space (R3,1) to dS3 × ℝ in a conformal relativistic theory. Here, we sharpen our previous analytic results and validate them via the first numerical exploration of the Gubser flow in a holographic conformal field theory.Remarkably, the leading generic behavior at large de Sitter time is free-streaming in transverse directions and the sub-leading behavior is that of a color glass condensate. We also show that Gubser flow can be smoothly glued to the vacuum outside the future Minkowski wedge generically given that the energy density vanishes faster than any power when extrapolated to early proper time or to large distances from the central axis. We find that at intermediate times the ratio of both the transverse and longitudinal pressures to the energy density converge approximately to a fixed point which is hydrodynamic only for large initial energy densities. We argue that our results suggest that the Gubser flow is better applied to collective behavior in jets rather than the full medium in the phenomenology of heavy ion collisions and can reveal new clues to the mechanism of confinement.

Design and Development of Energy Particle Detector on China’s Chang’e-7

Particle radiation on the Moon is influenced by a combination of galactic cosmic rays, high-energy solar particles, and secondary particles interacting on the lunar surface. When China’s Chang’e-7 lander lands at the Moon’s South Pole, it will encounter this complex radiation environment. Therefore, a payload detection technology was developed to comprehensively measure the energy spectrum, direction, and radiation effects of medium- and high-energy charged particles on the lunar surface. During the ground development phase, the payload performance was tested against the design specifications. The verification results indicate that the energy measurement ranges are 30 keV to 300 MeV for protons, 30 keV to 12 MeV for electrons, and 8 to 400 MeV/n for heavy ions. The energy resolution is 10.81% for 200 keV electrons of the system facing the lunar surface; the dose rate measurement sensitivity is 7.48 µrad(Si)/h; and the LET spectrum measurement range extends from 0.001 to 37.014 MeV/(mg/cm2). These comprehensive measurements are instrumental in establishing a lunar surface particle radiation model, enhancing the understanding of the lunar radiation environment, and supporting human lunar activities.

Shattering Reality: Monsters from the Multiverse

Kaijū media frequently features dangerous scientific experiments as a central theme, invented by scientists who are falsely convinced that they both completely understand and control their advanced technology. In the past few decades, this has included the introduction of high-energy physics (HEP) experiments—especially mammoth particle accelerators—that, among other destructive results, allow for the entrance of equally large and dangerous creatures into our world from parallel dimensions. Public concerns voiced about the safety of the creation of two groundbreaking energy accelerators—the Relativistic Heavy Ion Collider (RHIC) in New York and the Large Hadron Collider (LHC) in Europe—in the early 21st century are tied to related science fiction media that capitalize on such fears (including Godzilla vs. Megaguirus [2000], Pacific Rim [2013], The Cloverfield Paradox [2018], The Kaiju Preservation Society [2022]). Particular attention is paid to the Netflix original series Stranger Things (2016–) as a detailed case study. This study concludes with an analysis of scientists’ attempts to embrace the popularity of Stranger Things in their communication with the general public, and suggests that ongoing issues with conspiracy theories have been fueled in part by such attempts, coupled with long-standing issues with the HEP community and their peculiar scientific naming conventions.

The State of Solar Wind Heavy Ions in Interplanetary Coronal Mass Ejection–Driven Geomagnetic Storms

During geomagnetic storms, which are the primary periods for heavy ions from the solar wind to enter Earth’s magnetospheric space, the charge state of solar wind heavy ions during these storms has significant implications for studying the distribution and effects of heavy ions in the magnetosphere. We analyzed the states and variations of heavy ions during 158 interplanetary coronal mass ejection (ICME)–driven geomagnetic storm events using data from the Advanced Composition Explorer satellite and examined four of these events in detail. We found that the increase in the average charge state of heavy ions such as O, Mg, Si, and Fe is positively correlated with the intensity of the geomagnetic storm. Regarding the abundance ratio of heavy ions such as Ne, Mg, Si, and Fe relative to oxygen ions, the rate and magnitude of increase in abundance ratios during extreme geomagnetic storms (Kp = 9) triggered by ICME events are significantly higher than those during other levels of geomagnetic storms. Additionally, we observed that although the average charge states of heavy ions such as O and Fe are correlated with the geomagnetic storm intensity induced by ICMEs, there are significant individual differences in the charge state variations of heavy ions.

SMASH as an event generator for heavy-ion collisions

In this article we present an overview of the SMASH hadronic transport approach that is applied for non-equilibrium dynamics of hadrons in heavy-ion collisions. We will give an overview about the ingredients of the approach and the applications for the dynamical description of heavy-ion collisions and for calculations of fundamental properties of the hadron gas. The main emphasis of the article will be the infrastructure for sustainable software development that we have developed over the last 10 years including extensive unit tests and continuous integration. We will also provide one section about the performance of the code and how it can be analyzed and improved in the future.