Recombinant Spider Silk Proteins Research Articles

Efficient Biosynthetic Fabrication of Spidroins with High Spinning Performance.

The unique 3D structure of spider silk protein (spidroin) determines the excellent mechanical properties of spidroin fiber, but the difficulty of heterologous expression and poor spinning performance of recombinant spider silk protein limit its application. A high-yield low-molecular-weight biomimetic spidroin (Amy-6rep) is obtained by sequence modification, and its excellent spinning performance is verified by electrospinning it for use as a nanogenerator. Amy-6rep increases the highly fibrogenic microcrystalline region in the core repeat region of natural spidroin with limited sequence length and replaces the polyalanine sequence with an amyloid polypeptide through structural similarity. Due to sequence modification, the expression of Amy-6rep increased by ≈200%, and the self-assembly performance of Amy-6rep significantly increased. After electrospinning with Amy-6rep, the nanofibers exhibit good tribopower generation capacity. In this paper, a biomimetic spidroin sequence design with high yield and good spinning performance is reported, and a strategy for electrospinning to produce an artificial nanogenerator is explored.

Spiders Use Structural Conversion of Globular Amyloidogenic Domains to Make Strong Silk Fibers

AbstractSpider silk—an environmentally friendly protein‐based material—is widely recognized for its extraordinary mechanical properties. Biomimetic spider silk‐like fibers made from recombinant spider silk proteins (spidroins) currently falls short compared to natural silks in terms of mechanical performance. In this study, it is discovered that spiders use structural conversion of molecular enhancers—conserved globular 127‐residue spacer domains—to make strong silk fibers. This domain lacks poly‐Ala motifs but interestingly contains motifs that are similar to human amyloidogenic motifs, and that it self‐assembles into amyloid‐like fibrils through a non‐nucleation‐dependent pathway, likely to avoid the formation of cytotoxic intermediates. Incorporating this spacer domain into a recombinant chimeric spidroin facilitates self‐assembly into silk‐like fibers, increases fiber molecular homogeneity, and markedly enhances fiber mechanical strength. These findings highlight that spiders employ diverse strategies to produce silk with exceptional mechanical properties. The spacer domain offers a way to enhance the properties of recombinant spider silk‐like fibers and other functional materials.

Strategies for Making High‐Performance Artificial Spider Silk Fibers

AbstractArtificial spider silk is an attractive material for many technical applications since it is a biobased fiber that can be produced under ambient conditions but still outcompetes synthetic fibers (e.g., Kevlar) in terms of toughness. Industrial use of this material requires bulk‐scale production of recombinant spider silk proteins in heterologous host and replication of the pristine fiber's mechanical properties. High molecular weight spider silk proteins can be spun into fibers with impressive mechanical properties, but the production levels are too low to allow commercialization of the material. Small spider silk proteins, on the other hand, can be produced at yields that are compatible with industrial use, but the mechanical properties of such fibers need to be improved. Here, the literature on wet‐spinning of artificial spider silk fibers is summarized and analyzed with a focus on mechanical performance. Furthermore, several strategies for how to improve the properties of such fibers, including optimized protein composition, smarter spinning setups, innovative protein engineering, chemical and physical crosslinking as well as the incorporation of nanomaterials in composite fibers, are outlined and discussed.

Self-Assembly of RGD-Functionalized Recombinant Spider Silk Protein into Microspheres in Physiological Buffer and in the Presence of Hyaluronic Acid.

Biomaterials made of self-assembling protein building blocks are widely explored for biomedical applications, for example, as drug carriers, tissue engineering scaffolds, and functionalized coatings. It has previously been shown that a recombinant spider silk protein functionalized with a cell binding motif from fibronectin, FN-4RepCT (FN-silk), self-assembles into fibrillar structures at interfaces, i.e., membranes, fibers, or foams at liquid/air interfaces, and fibrillar coatings at liquid/solid interfaces. Recently, we observed that FN-silk also assembles into microspheres in the bulk of a physiological buffer (PBS) solution. Herein, we investigate the self-assembly process of FN-silk into microspheres in the bulk and how its progression is affected by the presence of hyaluronic acid (HA), both in solution and in a cross-linked HA hydrogel. Moreover, we characterize the size, morphology, mesostructure, and protein secondary structure of the FN-silk microspheres prepared in PBS and HA. Finally, we examine how the FN-silk microspheres can be used to mediate cell adhesion and spreading of human mesenchymal stem cells (hMSCs) during cell culture. These investigations contribute to our fundamental understanding of the self-assembly of silk protein into materials and demonstrate the use of silk microspheres as additives for cell culture applications.

Wet spinning is employed to produce spider silk with high elasticity

Spider silk exhibits exceptional strength and elasticity in its natural form. Over the course of several decades, researchers have been working on artificially spinning recombinant spider silk proteins (spidroin) in order to replicate the remarkable mechanical properties of natural spider silk. In this study, we utilized the wet spinning method to investigate the relationship between the concentration of the coagulation bath and fiber performance. We discovered that the concentration of methanol plays a crucial role in determining the continuity, diameter, and mechanical properties of the fibers. Lower concentrations of methanol favor the production of continuous, thinner fibers with higher strain. Additionally, secondary stretching during the spinning process contributes to the production of silk fibers with stable mechanical properties and thermal stability. By employing different concentrations of methanol and applying additional stretching, we successfully produced silk fibers with a high strain of 2.1652 ± 0.3871 mm/mm. Furthermore, these wet-spun fibers demonstrated the ability to promote the growth of Schwann cells, indicating their potential application in the field of biomedical engineering. Hence, the exceptional mechanical properties and the ability to promote cellular growth make the obtained spider silk fibers highly promising for various biomedical applications.

Suitable electrospinning approaches for recombinant spider silk proteins

Among the versatile opportunities of processing recombinant spider silk proteins into coatings, hydrogels, particles, fibrils and foams, electrospinning provides a further highly important morphology: submicron- and nanofibers. These fibers display a high surface-to-volume ratio, which, in combination with the silk's biocompatibility, flexibility and functionality allows various applications including drug-delivery, tissue engineering, wound dressings as well as particle filtration from liquid or gas. Based on the chosen application, individual spider silk proteins can be spun out of a choice of solvents using different spinning techniques in order to achieve the desired properties of the fibers. In this perspective article so far used electrospinning solvents, techniques and collectors are displayed and brought into context with their possible application.

Global analysis of kinetics reveals the role of secondary nucleation in recombinant spider silk self-assembly.

Recombinant spider silk proteins can be prepared in scalable fermentation processes and have been proven as sources of biomaterials for biomedical and technical applications. Nanofibrils, formed through the self-assembly of these proteins, possess unique structural and mechanical properties, serving as fundamental building blocks for the fabrication of micro- and nanostructured scaffolds. Despite significant progress in utilizing nanofibrils-based morphologies of recombinant spider silk proteins, a comprehensive understanding of the molecular mechanisms of nanofibrils self-assembly remains a challenge. Here, a detailed kinetic study of nanofibril formation from a recombinant spider silk protein eADF4(C16) in dependence on the protein concentration, seeding and temperature is provided. For the global fitting of kinetic data obtained during the fibril formation, we utilized the online platform AmyloFit. Evaluation of the data revealed that the self-assembly mechanism of recombinant spider silk is dominated by secondary nucleation. Thermodynamic analyses show that both primary and secondary nucleations, as well as the elongation step of the eADF4(C16), are endothermic processes. This article is protected by copyright. All rights reserved.

Rheological and Biological Impact of Printable PCL-Fibers as Reinforcing Fillers in Cell-Laden Spider-Silk Bio-Inks.

The development of bio-inks capable of being 3D-printed into cell-containing bio-fabricates with sufficient shape fidelity is highly demanding. Structural integrity and favorable mechanical properties can be achieved by applying high polymer concentrations in hydrogels. Unfortunately, this often comes at the expense of cell performance since cells may become entrapped in the dense matrix. This drawback can be addressed by incorporating fibers as reinforcing fillers that strengthen the overall bio-ink structure and provide a second hierarchical micro-structure to which cells can adhere and align, resulting in enhanced cell activity. In this work, the potential impact of collagen-coated short polycaprolactone-fibers on cells after being printed in a hydrogel is systematically studied. The matrix is composed of eADF4(C16), a recombinant spider silk protein that is cytocompatible but non-adhesive for cells. Consequently, the impact of fibers could be exclusively examined, excluding secondary effects induced by the matrix. Applying this model system, a significant impact of such fillers on rheology and cell behavior is observed. Strikingly, it could be shown that fibers reduce cell viability upon printing but subsequently promote cell performance in the printed construct, emphasizing the need to distinguish between in-print and post-print impact of fillers in bio-inks.

Tuneable Recombinant Spider Silk Protein Hydrogels for Drug Release and 3D Cell Culture

AbstractHydrogels are useful drug release systems and tissue engineering scaffolds. However, synthetic hydrogels often require harsh gelation conditions and can contain toxic by‐products while naturally derived hydrogels can transmit pathogens and in general have poor mechanical properties. Thus, there is a need for a hydrogel that forms under ambient conditions, is non‐toxic, xeno‐free, and has good mechanical properties. A recombinant spider silk protein‐derived hydrogel that rapidly forms at 37 °C is recently developed. The temperature and gelation times are well‐suited for an injectable in situ polymerising hydrogel, as well as a 3D cell culture scaffold. Here, it is shown that the diffusion rate and the mechanical properties can be tuned by changing the protein concentration and that human fetal mesenchymal stem cells encapsulated in the hydrogels show high survival and viability. Furthermore, mixtures of recombinant spider silk proteins and green fluorescent protein (GFP) form gels from which functional GFP is gradually released, indicating that bioactive molecules are easily included in the gels, maintain activity and can diffuse through the gel. Interestingly, encapsulated ARPE‐19 cells are viable and continuously produce the growth factor progranulin, which is detected in the cell culture medium over the study period of 31 days.

In vitro Blood–Brain barrier model based on recombinant spider silk protein nanomembranes for evaluation of transcytosis capability of biomolecules

The blood–brain barrier (BBB) limits the uptake of central nervous system (CNS)-targeting drugs into the brain. Engineering molecular shuttles for active transportation across the barrier has thus potential for improving the efficacy of such drugs. In vitro assessment of potential transcytosis capability for engineered shuttle proteins facilitates ranking and the selection of promising candidates during development. Herein, the development of an assay based on brain endothelial cells cultured on permeable recombinant silk nanomembranes for screening of transcytosis capability of biomolecules is described. The silk nanomembranes supported growth of brain endothelial cells to form confluent monolayers with relevant cell morphology, and induced expression of tight-junction proteins. Evaluation of the assay using an established BBB shuttle antibody showed transcytosis over the membranes with an apparent permeability that significantly differed from the isotype control antibody.

Design of Recombinant Spider Silk Proteins for Cell Type Specific Binding (Adv. Healthcare Mater. 9/2023)

Cell-Selective Spider Silk Proteins In article number 2202660, Vanessa Tanja Trossmann and Thomas Scheibel design recombinant spider silk proteins to guide cell-specific materials interactions. The fusion of spider silk proteins with short peptides from extracellular matrix proteins such as KGD yield cell type selective binding, which enables the development of hierarchically organized tissues.

Silk Assembly against Hydrophobic Surfaces─Modeling and Imaging of Formation of Nanofibrils.

A detailed insight about the molecular organization behind spider silk assembly is valuable for the decoding of the unique properties of silk. The recombinant partial spider silk protein 4RepCT contains four poly-alanine/glycine-rich repeats followed by an amphiphilic C-terminal domain and has shown the capacity to self-assemble into fibrils on hydrophobic surfaces. We herein use molecular dynamic simulations to address the structure of 4RepCT and its different parts on hydrophobic versus hydrophilic surfaces. When 4RepCT is placed in a wing arrangement model and periodically repeated on a hydrophobic surface, β-sheet structures of the poly-alanine repeats are preserved, while the CT part is settled on top, presenting a fibril with a height of ∼7 nm and a width of ∼11 nm. Both atomic force microscopy and cryo-electron microscopy imaging support this model as a possible fibril formation on hydrophobic surfaces. These results contribute to the understanding of silk assembly and alignment mechanism onto hydrophobic surfaces.

Tyrosine's Unique Role in the Hierarchical Assembly of Recombinant Spider Silk Proteins: From Spinning Dope to Fibers.

Producing recombinant spider silk fibers that exhibit mechanical properties approaching native spider silk is highly dependent on the constitution of the spinning dope. Previously published work has shown that recombinant spider silk fibers spun from dopes with phosphate-induced pre-assembly (biomimetic dopes) display a toughness approaching native spider silks far exceeding the mechanical properties of fibers spun from dopes without pre-assembly (classical dopes). Dynamic light scattering experiments comparing the two dopes reveal that biomimetic dope displays a systematic increase in assembly size over time, while light microscopy indicates liquid-liquid-phase separation (LLPS) as evidenced by the formation of micron-scale liquid droplets. Solution nuclear magnetic resonance (NMR) shows that the structural state in classical and biomimetic dopes displays a general random coil conformation in both cases; however, some subtle but distinct differences are observed, including a more ordered state for the biomimetic dope and small chemical shift perturbations indicating differences in hydrogen bonding of the protein in the different dopes with notable changes occurring for Tyr residues. Solid-state NMR demonstrates that the final wet-spun fibers from the two dopes display no structural differences of the poly(Ala) stretches, but biomimetic fibers display a significant difference in Tyr ring packing in non-β-sheet, disordered helical domains that can be traced back to differences in dope preparations. It is concluded that phosphate pre-orders the recombinant silk protein in biomimetic dopes resulting in LLPS and fibers that exhibit vastly improved toughness that could be due to aromatic ring packing differences in non-β-sheet domains that contain Tyr.

Design of Recombinant Spider Silk Proteins for Cell Type Specific Binding.

Cytophilic (cell-adhesive) materials are very important for tissue engineering and regenerative medicine. However, for engineering hierarchically organized tissue structures comprising different cell types, cell-specific attachment and guidance are decisive. In this context, materials made of recombinant spider silk proteins are promising scaffolds, since they exhibit high biocompatibility, biodegradability, and the underlying proteins can be genetically functionalized. Here, previously established spider silk variants based on the engineered Araneus diadematus fibroin 4 (eADF4(C16)) are genetically modified with cell adhesive peptide sequences from extracellular matrix proteins, including IKVAV, YIGSR,QHREDGS, and KGD. Interestingly, eADF4(C16)-KGD as one of 18tested variants is cell-selective for C2C12mouse myoblasts, one out of 11 tested cell lines. Co-culturing with B50rat neuronal cells confirms the cell-specificity of eADF4(C16)-KGD material surfaces for C2C12mouse myoblast adhesion.

β-Sheet Structure Formation within Binary Blends of Two Spider Silk Related Peptides.

Intrinsically disordered proteins (IDPs) play an important role in molecular biology and medicine because their induced folding can lead to so-called conformational diseases, where β-amyloids play an important role. Still, the molecular folding process into the different substructures, such as parallel/antiparallel or extended β-sheet/crossed β-sheet is not fully understood. The recombinant spider silk protein eADF4(Cx) consisting of repeating modules C, which are composed of a crystalline (pep-c) and an amorphous peptide sequence (pep-a), can be used as a model system for IDP since it can assemble into similar structures. In this work, blend films of the pep-c and pep-a sequences were investigated to modulate the β-sheet formation by varying the molar fraction of pep-c and pep-a. Dichroic Fourier-transform infrared spectroscopy (FTIR), circular dichroism, spectroscopic ellipsometry, atomic force microscopy, and IR nanospectroscopy were used to examine the secondary structure, the formation of parallel and antiparallel β-sheets, their orientation, and the microscopic roughness and phase formation within peptide blend films upon methanol post-treatment. New insights into the formation of filament-like structures in these silk blend films were obtained. Filament-like structures could be locally assigned to β-sheet-rich structures. Further, the antiparallel or parallel character and the orientation of the formed β-sheets could be clearly determined. Finally, the ideal ratio of pep-a and pep-c sequences found in the fibroin 4 of the major ampullate silk of spiders could also be rationalized by comparing the blend and spider silk protein systems.

The Properties and Application of Natural Spider Silk: a Literature Review

Drag silk, which is produced by the main ampullate silk gland, is a kind of natural insect silk which outperforms some other kinds of silk. Given its exceptional mechanical characteristics and excellent biocompatibility, drag silk, a kind of spider silk, does have the potential to be utilized by humans. The excellent properties of natural spider silk make it useful in many fields. But due to the cannibalistic nature of spiders, spiders cannot be reared on a large scale to meet the huge demand for spider silk. The development of recombinant spider silk protein and artificial spider silk through research and development is vital for the commercialization of spider silk and its applications. This research outlines the possible applications of natural spider silk by examining its physical, biological, and characteristic features. Due to its extraordinary physical and biological properties, drag silk and its corresponding silk proteins have been found to have the potential for the applications in the aerospace industry and biomedical treatments.

Recombinant Spider Silk Fiber with High Dimensional Stability in Water and Its NMR Characterization

Spider dragline silk has unique characteristics of strength and extensibility, including supercontraction. When we use it as a biomaterial or material for textiles, it is important to suppress the effect of water on the fiber by as much as possible in order to maintain dimensional stability. In order to produce spider silk with a highly hydrophobic character, based on the sequence of ADF-3 silk, we produced recombinant silk (RSSP(VLI)) where all QQ sequences were replaced by VL, while single Q was replaced by I. The artificial RSSP(VLI) fiber was prepared using formic acid as the spinning solvent and methanol as the coagulant solvent. The dimensional stability and water absorption experiments of the fiber were performed for eight kinds of silk fiber. RSSP(VLI) fiber showed high dimensional stability, which is suitable for textiles. A remarkable decrease in the motion of the fiber in water was made evident by 13C solid-state NMR. This study using 13C solid-state NMR is the first trial to put spider silk to practical use and provide information regarding the molecular design of new recombinant spider silk materials with high dimensional stability in water, allowing recombinant spider silk proteins to be used in next-generation biomaterials and materials for textiles.

Preparation and Characterization of Nanofibrous Membranes Electro-Spun from Blended Poly(l-lactide-co-ε-caprolactone) and Recombinant Spider Silk Protein as Potential Skin Regeneration Scaffold.

Biomaterial scaffolding serves as an important strategy in skin tissue engineering. In this research, recombinant spider silk protein (RSSP) and poly(L-lactide-co-ε-caprolactone) (PLCL) were blended in different ratios to fabricate nanofibrous membranes as potential skin regeneration scaffolds with an electro-spinning process. Scanning electron microscopy (SEM), water contact angles measurement, Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), tensile mechanical tests and thermo-gravimetric analysis (TGA) were carried out to characterize the nanofibrous membranes. The results showed that the blending of RSSP greatly decreased the nanofibers' average diameter, enhanced the hydrophilicity, changed the microstructure and thermal properties, and could enable tailored mechanical properties of the nanofibrous membranes. Among the blended membranes, the PLCL/RSSP (75/25) membrane was chosen for further investigation on biocompatibility. The results of hemolysis assays and for proliferation of human foreskin fibroblast cells (hFFCs) confirmed the membranes potential use as skin-regeneration scaffolds. Subsequent culture of mouse embryonic fibroblast cells (NIH-3T3) demonstrated the feasibility of the blended membranes as a human epidermal growth factor (hEGF) delivery matrix. The PLCL/RSSP (75/25) membrane possessed good properties comparable to those of human skin with high biocompatibility and the ability of hEGF delivery. Further studies can be carried out on such membranes with chemical or genetic modifications to make better scaffolds for skin regeneration.

Impact of physio-chemical spinning conditions on the mechanical properties of biomimetic spider silk fibers

Artificial spider silk has emerged as a biobased fiber that could replace some petroleum-based materials that are on the market today. Recent progress made it possible to produce the recombinant spider silk protein NT2RepCT at levels that would make the commercialization of fibers spun from this protein economically feasible. However, for most applications, the mechanical properties of the artificial silk fibers need to be improved. This could potentially be achieved by redesigning the spidroin, and/or by changing spinning conditions. Here, we show that several spinning parameters have a significant impact on the fibers’ mechanical properties by tensile testing more than 1000 fibers produced under 92 different conditions. The most important factors that contribute to increasing the tensile strength are fast reeling speeds and/or employing post-spin stretching. Stretching in combination with optimized spinning conditions results in fibers with a strength of >250 MPa, which is the highest reported value for fibers spun using natively folded recombinant spidroins that polymerize in response to shear forces and lowered pH.

Dual Patterning of Self‐Assembling Spider Silk Protein Nanofibrillar Networks

AbstractSelf‐assembly of a recombinant spider silk protein into nanofibrillar networks in combination with photolithography is used to produce diversely functionalized micropattern. Amino‐modified substrates coated with a positive tone photoresist are processed into 1 µm deep arbitrarily shaped microwells, at the bottom of which spider silk proteins are covalently coupled to the deprotected aminated surface. The protein layer serves to seed the self‐assembly of nanofibrils from the same protein in the microwells, forming immobilized few nanometers thin networks after the stripping of the photoresist. The nanofibrous micropattern can be functionalized by employing fluorescently modified spider silk variants during the self‐assembly or by later covalent modification with nucleic acids. By repeating the photolithography and fibril assembly procedures, two functionally different and spatially defined pattern are created.