Reaction Of Alkyl Halides Research Articles

Efficient phosphine-mediated formal C(sp3)-C(sp3) coupling reactions of alkyl halides in batch and flow.

The construction of C(sp3)-C(sp3) bond is an essential chemical transformation in synthetic chemistry due to its abundance in organic scaffolds. Here we demonstrate a valuable adaptation of the Wittig-type chemical procedure to efficiently facilitate C(sp3)-C(sp3) bond formation utilizing a range of alkyl building blocks. Additionally the method is amenable with flow synthesis to afford coupled products in good to excellent yields without laborious purification process.

Reaction of Alkyl Halides with Rongalite: One-Pot and Telescoped Syntheses of Aliphatic Sulfonamides, Sulfonyl Fluorides, and Unsymmetrical Sulfones.

An efficient methodology has been developed for the one-pot or telescoped synthesis of aliphatic sulfonamides, sulfonyl fluorides, and unsymmetrical sulfones on the basis of interrupted alkylation of sodium hydroxymethylsulfinate (rongalite) with alkyl halides. The protocols are conducted under mild conditions, use inexpensive and shelf-stable reagents, and are not sensitive to air/moisture. These conditions can be applied in rapid parallel chemical synthesis, which was demonstrated by the preparation of a small sulfonamide library based on the core structure of the anticoagulant drug Tirofiban.

Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.

Preparation and characterization of functionalized graphene oxide Cu (I) complex: A facile and reusable nanocatalyst for microwave assisted heterocyclization of alkyl halides with alkynes and sodium azide

In this research, preparation of functionalized graphene oxide copper (I) complex first involves a reaction of carboxylic groups on graphene oxide with the amino groups on 1,7-heptandiamine and isotoic anhydride, and subsequently treatment with copper iodide. The formed complex was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), energy dispersive X- ray (EDX) and field emission scanning electron microscopy (FE-SEM) techniques. 1,2,3-triazoles were synthesized from reaction of alkyl halides, alkynes and sodium azide catalyzed by functionalized graphene oxide copper (I) complex under microwave irradiation in excellent yields. This procedure eliminates the need to handle organic azides.

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu2O/Casein@Fe3O4NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.

Reactivity II: A Second Foundation-Level Course in Integrated Organic, Inorganic, and Biochemistry

A foundation-level course is described that integrates material related to reactivity in organic, inorganic, and biochemistry. Designed for second-year students, the course serves majors in chemistry, biochemistry, and biology, as well as prehealth-professions students. Building on an earlier course that developed concepts of nucleophiles and electrophiles in organic carbonyl chemistry and coordination compounds, Reactivity II explores the concept of mechanistic alternatives in substitution reactions of alkyl halides and transition metal complexes. Kinetics is introduced as a diagnostic tool for understanding mechanisms, and is extended to the study of enzyme-catalyzed reactions. An introduction to the reactivity of alkenes and aromatics rounds out students’ understanding of reactions involving electrophiles and nucleophiles.

Ultrasound promoted facile one pot synthesis of triazole derivatives catalyzed by functionalized graphene oxide Cu(I) complex under mild conditions

A facile one pot three component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide copper (I) complex under ultrasonic irradiation at room temperature. In this protocol, the 1,4-disubstituted 1,2,3-triazoles were afforded as target pure products in excellent yields and short reaction times. The prepared catalyst has been characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), Energy Dispersive X-ray (EDX) and field emission scanning electron microscopy (FE-SEM) techniques. Also, the catalyst is chemoselective and stable and can be reused several times without any appreciable loss of its catalytic activity.

Cyclic ammonium salts of dithiocarbamic acid: stable alternative reagents for the synthesis of S-alkyl carbodithioates from organyl thiocyanates in water

ABSTRACTCarbodithioate esters are important functional organosulfur compounds widely used in diverse fields such as pharmaceuticals, agrochemicals and material sciences. Common preparative methods include reaction of alkyl halides, carbon disulfide and bases under both metal-free and metal-catalyzed conditions. However, organyl thiocyanates have not been previously explored, possibly because of their conversion to organyl disulfides under basic conditions. Here, we report an efficient and practical method for the preparation of libraries of carbodithioate esters from organyl thiocyanates by reacting with cyclic amine-based dithiocarbamic acid salts in water. The protocol is found to be applicable in general to various thiocyanates such as benzyl/aroyl methyl/cinnamyl and so on. Other notable features include no by-products such as disulfides, metal- and alkali-free, aqueous conditions, and finally easy and near-quantitative formation of cyclic amine-based dithiocarbamic acid salt as a stable alternative reagent.

ChemInform Abstract: Copper‐Catalyzed Thioetherification Reactions of Alkyl Halides, Triphenyltin Chloride, and Arylboronic Acids with Nitroarenes in the Presence of Sulfur Sources.

AbstractA wide range of structurally diverse alkyl/benzyl aryl and unsymmetrical diaryl thioethers are obtained by three efficient methodologies using green solvents, inexpensive catalysts, and user‐friendly starting materials.

Computational studies on the reactivity of alkyl halides over (Al2O3)n nanoclusters: an approach towards room temperature dehydrohalogenation.

The role of alumina nanoclusters as a catalyst on the reactivity of alkyl halides has been explored. The thermochemical data obtained from Density Functional Theory (DFT) calculations and the analyses of the transition structures reveal that, between the two competing reactions, elimination (via E2) versus dissociative addition (via SN2), elimination is the kinetically controlled one and thus at room temperature, olefin is the major product. The results are in excellent agreement with the recent experimental observation where more than 97% of ethylene is formed at room temperature with the reaction of ethyl fluoride over an alumina surface, although the dissociative addition product is being thermodynamically more stable. We have tried to rationalize the fact by using alumina clusters of different sizes as well as different alkyl halides having β-H for elimination. It has been shown that, during the elimination (E2) pathway, the transition structure is oriented in such a way that the eliminating halogen and the β-H are in the interacting position with the three-centered Al and two-centered O atoms, respectively, where the Lewis acid/base interaction is the main guiding factor. We have also shown a possible pathway for regenerating the catalyst. Finally, the possibility of the reactions has been tested in the presence of H2O to mimic the same on the hydrated alumina surface.

SN1 reactions in supercritical carbon dioxide in the presence of alcohols: the role of preferential solvation.

Ethanol () inhibits SN1 reactions of alkyl halides in supercritical carbon dioxide (scCO2) and gives no ethers as products. The unexpected behaviour of alcohols in the reaction of alkyl halides with 1,3-dimethoxybenzene () in scCO2 under different conditions is rationalised in terms of Brønsted and Lewis acid-base equilibria of reagents, intermediates, additives and products in a singular solvent characterised by: (i) the strong quadrupole and Lewis acid character of carbon dioxide, which hinders SN2 paths by strongly solvating basic solutes; (ii) the weak Lewis base character of carbon dioxide, which prevents it from behaving as a proton sink; (iii) the compressible nature of scCO2, which enhances the impact of preferential solvation on carbon dioxide availability for the solvent-demanding rate determining step.

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.

Copper-Catalyzed Thioetherification Reactions of Alkyl Halides, Triphenyltin Chloride, and Arylboronic Acids with Nitroarenes in the Presence of Sulfur Sources.

In this article, we report three odorless methods for the thioarylation and thioalkylation of different nitroarenes using alkyl halides (Br, Cl), triphenyltin chloride, and arylboronic acids as the coupling partners. Triphenyltin chloride is capable of delivering all of its phenyl groups to the product. Depending on the reaction, sodium thiosulfate pentahydrate (Na2S2O3·5H2O), S8/KF, and S8/NaOH systems are found to be effective sources of sulfur in the presence of copper salts. The use of green solvents, inexpensive catalysts, and user-friendly starting materials has made these methods interesting from a green chemistry standpoint.

Uranyl Schiff base complexes as new heterogeneous catalysts for halogen exchange reactions between alkyl halides and elemental halogens

Mild and effective procedure for the halogen exchange reaction of alkyl halides with elemental iodine and bromine catalyzed with uranyl Schiff base complexes in various aprotic solvents was developed. Corresponding alkyl bromides and iodides were obtained with high yields within 20—70 min. The structures of the target products were confirmed by physical and spectroscopic data.

Stereospecific Intramolecular Reductive Cross-Electrophile Coupling Reactions for Cyclopropane Synthesis.

The stereospecific reductive cross-electrophile coupling reaction of 2-aryl-4-chlorotetrahydropyrans to afford disubstituted cyclopropanes is reported. This ring contraction presents surprises with respect to the stereochemical outcome of reaction of the alkyl halide moiety. While cross-coupling and reductive cross-electrophile coupling reactions of alkyl halides are typically stereoablative, using a chiral catalyst to set the stereocenter, this transformation proceeds with high stereochemical fidelity at the alkyl halide and ether bearing stereogenic centers. This approach provides straightforward access to highly substituted cyclopropanes in two steps from commercially available aldehydes.

Mild and Regioselective N-Alkylation of 2-Pyridones in Water

A mild and regioselective N-alkylation reaction of 2-pyridones in water has been developed. Tween 20 (2% w/w) was added to create a micellar system for improved solubility of starting materials, which leads to enhanced reaction rates. The protocol demonstrated a wide substrate scope with good isolated yields (40–94%) for all of the 24 examples evaluated. High regioselectivity favoring N-alkylation over O-alkylation was observed for benzyl halides (>5:1), primary alkyl halides (>6:1), and bulky and less reactive secondary alkyl halides (>2.4:1).

Direct synthesis of disulfides from alkyl halides using thiourea and CCl4 in glycerol

Dialkyl disulfides were obtained on the basis of the reaction of alkyl halides and thiourea in the presence of CCl4 and Et3N. This procedure enables the odorless and one-pot synthesis of disulfides by employing cheap, easy-to-handle and readily available reagents and substrates in wet glycerol.

Synthesis and biological evaluation of a new series of 4-alkoxy-2-arylquinoline derivatives as potential antituberculosis agents

Three new series of 33 quinolone compounds, 2-(2-, 3-, and 4-fluorophenyl)-4-O-alkyl(C$_{5-15})$quinolines (7a-k, 8a-k, and 9a-k), were synthesized from 2-(2-, 3-, and 4-fluorophenyl)-2,3-dihydroquinolin-4(1H)-one (4, 5, and 6) by the reaction of alkyl halides under basic conditions in DMF. The new compounds 7a-k, 8a-k, and 9a-k were synthesized from flavonones 4-6, which can be considered new precursors for quinoline synthesis through a one-step reaction. All the target compounds (7a-k, 8a-k, and 9a-k) were evaluated for their in vitro antimicrobial activity against nine test microorganisms. They showed the most activity against Mycobacterium smegmatis with minimum inhibitory concentrations (MIC) of 62.5-500 $\mu $g/mL, indicating their potential uses as antituberculosis agents. Among them 8a-k (m-fluoride) were the most active compounds against M. smegmatis (MIC, 62.5-125 $\mu $g/mL). The newly synthesized title compounds were also evaluated for their in vitro antioxidant activities using DPPH• radical scavenging and FRAP tests. They showed at a low concentration (mg/mL) a range of SC$_{50}$ values of 0.03-12.48 mg/mL (DPPH•) and 0-722 $\mu $M (FRAP), respectively. The antioxidant results of compounds 7a-k, 8a-k, and 9a-k revealed that the length of the alkyl chain was negatively correlated with antioxidant capacity.

Iron Pincer Complexes as Catalysts and Intermediates in Alkyl–Aryl Kumada Coupling Reactions

Iron-catalyzed alkyl–aryl Kumada coupling has developed into an efficient synthetic method, yet its mechanism remains vague. Here, we apply a bis(oxazolinylphenyl)amido pincer ligand (Bopa) to stabilize the catalytically active Fe center, resulting in isolation and characterization of well-defined iron complexes whose catalytic roles have been probed and confirmed. Reactivity studies of the iron complexes identify an Fe(II) “ate” complex, [Fe(Bopa-Ph)(Ph)2]−, as the active species for the oxidative addition of alkyl halide. Experiments using radical-probe substrates and DFT computations reveal a bimetallic and radical mechanism for the oxidative addition. The kinetics of the coupling of an alkyl iodide with PhMgCl suggests that formation of the “ate” complex, rather than oxidative addition, is the turnover-determining step. This work provides insights into iron-catalyzed cross-coupling reactions of alkyl halides.

Acceleration of CuI-catalyzed coupling reaction of alkyl halides with aryl Grignard reagents using lithium chloride

In the presence of LiCl, CuI-catalyzed coupling reaction of R(alkyl)-X with Ar(aryl)MgBr at rt was completed within 2h. Effective leaving groups X in R-X were Br, I, OTs, but not Cl. Grignard reagents ArMgBr with both standard and bulky Ar such as 2-MeC6H4, 2-MeOC6H4, and 2,6-(Me)2C6H3 afforded the desired products in good yields. Ester and cyano groups in R-X were tolerated. Coupling reaction with R(alkyl)-MgBr proceeded as well.