Absorption Ratio Research Articles

Tailoring Dynamic Chains of Cross‐Linked PDMS to Hinder Oil Penetration

AbstractPolydimethylsiloxane (PDMS) is the most studied organosilicon polymer, finding broad applications in soft lithography of microfluidic devices, wearable electronics insulation, medical tubing, shielding coatings, and sealant elements. However, their cross‐linked forms swell severely in nonpolar oils due to the comparable solubility parameters. Here, an oil‐stable cross‐linked PDMS discovered by grafting flexible PDMS chains onto its polymeric networks is reported, which enables surface‐exposed chains with high dynamics. It is found that the synergetic effect of mobile nanopore filling and quasi‐liquid lubrication of PDMS brushes endows the cross‐linked matrix with a reduced oil absorption ratio of up to 91.7% without altering its surface composition. Moreover, stretching polymeric networks can be re‐arranged with an adequate grafting of PDMS chains, further enhancing the antipenetration performance. This discovery of the oil‐stable surface configuration of cross‐linked PDMS breaks the constraint of siloxane elastomers not being applicable in nonpolar soluble liquid, opening a new era of research in organosilicon chemistry.

Horizontally stacked inverted U-shaped dual-band implantable antenna with circularly polarized for biotelemetry application

Abstract A horizontally stacked inverted U-shaped dual-band implantable antenna is proposed for RFID and health care monitoring implantable applications. The designed antenna operates at 0.952 GHz ultrahigh frequency band (UHF; 0.951–0.956 GHz) and 2.4 GHz industrial, scientific, and medical band (ISM; 2.4–2.4835 GHz) in a suitable feeding scheme. The shorting pin is used on the radiation patch to minimize the antenna structure. The final dimension of the designed antenna size is 9 × 9 × 0.635 mm 3 . The defected ground structure (DGS) helped to produce radiation with circular polarization (CP) at 2.4 GHz resonant frequency. The designed antenna achieves an axial ratio (AR) bandwidth of 20% at 2.4 GHz resonant frequency. The antenna is designed on Rogers RT Duroid 6010 substrate and fabricated. The same dielectric material was used as a superstrate. At both the UHF and ISM frequency bands, the experiment was conducted using skin-mimicking gel and minced pork. The horizontally stacked inverted U-shaped antenna has a high peak gain of −27.5 dBi at 0.952 GHz. The computed maximum specific absorption ratio is within allowable bounds and complies with IEEE safety criteria.

Study on the Thermal Control Performance of Mg-Li Alloy Micro-Arc Oxidation Coating in High-Temperature Environments

This paper reports on the successful preparation of a low absorption–emission thermal control coating on the surface of LAZ933 magnesium–lithium alloy using the micro-arc oxidation method. This study analyzed the microstructure, phase composition, and thermal control properties of the coating using Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), UV–visible near-infrared spectroscopy (UV-VIS-NIR) and infrared emissivity measurements. The results indicate that the hemispherical emissivity of the coating remains unaffected with an increase in temperature and holding time, while the solar absorption ratio gradually increases. The thermal control performance of the coating after a high-temperature experiment was found to be related to the diffusion of the Li metal element in the magnesium lithium alloy matrix, as determined by X-ray photoelectron spectroscopy (XPS), flame graphite furnace atomic absorption spectrometry (GFAAS) and Glow Discharge Optical Emission Spectroscopy (GD-OES). As the holding time is extended, the coating structure gradually loosens under thermal stress. The Li metal element in the substrate diffuses outward and reacts with O2, H2O and CO2 in the air, forming LiO2, LiOH, Li2CO3 and other products. This reaction affects the coating’s solar absorption ratio in the end.

Straw additive enhances manure compost quality by promoting diverse aerobic bacteria and unitary thermophilic fungi

Shortening the initial activation time and extending the duration of the thermophilic phase are key to improving compost product quality in cold-climate regions. This study set up three treatments that cattle manure (CM), manure with rice straw (MR), and manure with maize straw (MM) in the field with ambient temperature ranging from –6 to 7 ℃. Compared with traditional manure composting, composting with straw performed more effectively, and the effect of the addition of maize straw surpassed that of the addition of rice straw. Straw additives markedly increased the compost pile temperature and extended the thermophilic phase duration. In addition, straw addition improved compost product maturity, as indicated by the humic-like substance content, absorbance ratio, and germination index. To further illustrate this result, the microbial community structure during the composting process was studied. During the thermophilic phase, straw additives, especially maize straw, improved the formation of a diverse aerobic bacterial community and a unitary thermophilic fungal community, and promoted a stronger relationship between the bacterial and fungal communities, as revealed by co-inertia analysis. The abundance of functional genes indicated that straw addition increased the activities of organic carbon degradation and transformation. This study demonstrated the necessity of enhancing the interaction between thermophilic–aerobic bacteria and thermophilic fungi to improve compost product quality.

A RAPIDLY COLORIMETRIC DETECTION OF ARSENIC AND MERCURY IONS BASED ON SURFACE PLASMON RESONANCE ABSORBANCES OF FUNCTIONALIZED AuNPs IN COSMETICS

In this study, a novel colorimetric method is developed for the detection of arsenic and mercury ions, utilizing the surface plasmon resonance (SPR) properties of AuNPs ([Formula: see text] nanoparticles) functionalized with APT ([Formula: see text]-(3-aminophenyl) tetrazole). Theoretical calculations confirm the findings from UV–Visible spectroscopy and transmission electron microscopy analyses, indicating that APT is electrostatically bound to the surfaces of the AuNPs. The introduction of [Formula: see text] and [Formula: see text] ions triggers a coordination reaction with APT, resulting in a reduced interparticle distance among the AuNPs. This change leads to a visible color shift of the solution from wine red to bluish-gray. The detection limits for [Formula: see text] and [Formula: see text] are determined to be 0.6 and 0.24 [Formula: see text] g⋅[Formula: see text], respectively, distinguishable to the naked eye. A robust linear correlation is observed between the absorbance ratios and the ion concentrations, with correlation coefficients ([Formula: see text]) of 0.990 for [Formula: see text] and 0.998 for [Formula: see text]. These findings demonstrate that AuNPs functionalized with APT are effective for the quantitative analysis of arsenic and mercury ions. The sensor exhibits high selectivity and excellent resistance to interference, indicating its potential applicability for monitoring [Formula: see text] and [Formula: see text] in tap water and cosmetic products.

Improved heterogeneity handling in the collapsed cone dose engine for brachytherapy.

Model-based dose calculation algorithms (MBDCA), such as the Advanced Collapsed cone Engine (ACE) in Oncentra Brachy® can be used to overcome the limitations of the TG-43 formalism. ACE is a point kernel superposition algorithm that calculates the total dose separated into primary, first-scatter, and multiple-scatter dose. Albeit ACE yields accurate results under most circumstances, several studies have reported underestimations of the dose to cortical bone. These underestimations are likely caused by approximations in the handling of multiple-scatter dose for non-water media. Such would result in noticeable deviations where the multiple-scatter is a considerable fraction of the total dose, that is, at greater distances from the source. To improve and test the accuracy of the multiple-scatter dose component in the ACE algorithm to remedy its inaccuracy for non-water geometries. A careful analysis of the transport and absorption of the multiple-scatter energy fluence revealed an inconsistency in the scaling of energy absorption ratios for non-water media of the multiple-scatter kernel. We implemented an updated algorithm version, ACEcorr, and tested it for three different geometries. All had a single 192Ir-source at the center of a cubic water phantom with a box-shaped heterogeneity of either cortical bone or air, positioned at different distances from the source. Dose distributions for the three cases were calculated with ACE and ACEcorr and compared to Monte Carlo simulations, using the percentage dose difference ratio as figure-of-merit. All dose calculation methods scored separately the dose deposited by primary, first-scattered, and multiple-scattered photons. The accuracy of the updated algorithm ACEcorr was superior to ACE. In the cortical bone heterogeneity, the mean percentage dose difference ratio for the total dose improved from to (in the worst case) by our update. Less impact was seen in the air heterogeneity, where both ACE and ACEcorr deviated less than 2% from the Monte Carlo results. The algorithm update mainly concerns the multiple-scattered dose component, but an accompanying data processing update also had a small effect ( 0.5% difference) on the primary and first-scattered dose. The calculation times were not affected. The updates to ACE improved the accuracy of multiple-scatter dose calculation for non-water media, without increasing calculation times.

Preparation of D-NCCDs and its application in fluorescent/colorimetric dual-mode discrimination of glutamine enantiomers.

Anew type of carbon dots (D-NCCDs) was synthesized by 3, 5-diaminobenzoic acid, N,N-dimethyl-o-phenylenediamine, and D-cysteine. The morphology and structure of D-NCCDs were investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and FT-IR spectra, and the chirality was characterized by circular dichroism. In the presence of hydrogen peroxide, the fluorescence of D-NCCDs at 487nm (λex = 410nm) showed great discrimination ability towards glutamine enantiomers. The ratio of fluorescence intensity (F/F0) to the concentration of D-Gln showed good linearity in the range 0.5-10mM, with a detection limits of 0.11mM. Meanwhile, the color of the solution gradually changed from light yellow to yellow-brown. The UV-Vis absorption ratio (A/A0) at 410nm showed good linearity with the concentration of D-Gln in the range 0.5 to 20mM; the detection limit is 7.7μM. But the fluorescence and absorbance of D-NCCDs showed no significant change after the addition of L-glutamine. Thus, fluorescence and colorimetry dual-mode discrimination of glutamine enantiomers was achieved. The fluorescence enantioselectivity of Gln (FL-Gln/FD-Gln) is 1.62, and the colorimetric enantioselectivity of Gln (AD-Gln/AL-Gln) is 2.14. The chiral discrimination mechanism of D-NCCDs to Gln enantiomers was also investigated systematically. This work not only can discriminate glutamine enantiomers with high sensitivity and convenience, but also offers a new strategy for preparing new dual mode chiral nanoprobes.

The Effect of Doping Zinc Oxide Thin Films With (0.5 wt. %) Carbon Nanotubes by Vacuum Evaporation

The study included the production of nano-thin films made of zinc oxide doped with carbon nanotubes (ZnO:CNTs) at a doping ratio of 0.5 wt%. The materials are applied onto glass substrates using the vacuum evaporation process. The structural characteristics of the thin films of undiluted and doped ZnO were assessed using X-ray diffraction (XRD). Additionally, the surface properties of the films were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The optical characteristics of the thin films were analyzed and described using UV-Vis spectroscopy. The ZnO thin films exhibited crystalline formations. The thin films exhibited significant orientations along the (100), (002), and (101) crystallographic planes, indicating their hexagonal phase structures. The crystal size of ZnO thin films exhibited a range of 30.87 nm to 19.96 nm after the process of doping. The study findings demonstrate that the addition of carbon nanotubes leads to an increase in the absorption ratio. Zinc-doped carbon nanotube thin films has features that make them suitable for many applications, such as gas detectors and UV detectors.

The Chilean COVID-19 Genomics Network Biorepository: A Resource for Multi-Omics Studies of COVID-19 and Long COVID in a Latin American Population

Although a lack of diversity in genetic studies is an acknowledged obstacle for personalized medicine and precision public health, Latin American populations remain particularly understudied despite their heterogeneity and mixed ancestry. This gap extends to COVID-19 despite its variability in susceptibility and clinical course, where ethnic background appears to influence disease severity, with non-Europeans facing higher hospitalization rates. In addition, access to high-quality samples and data is a critical issue for personalized and precision medicine, and it has become clear that the solution lies in biobanks. The creation of the Chilean COVID-19 Biorepository reported here addresses these gaps, representing the first nationwide multicentric Chilean initiative. It operates under rigorous biobanking standards and serves as one of South America’s largest COVID cohorts. A centralized harmonization strategy was chosen and included unified standard operating procedures, a sampling coding system, and biobanking staff training. Adults with confirmed SARS-CoV-2 infection provided broad informed consent. Samples were collected to preserve blood, plasma, buffy coat, and DNA. Quality controls included adherence to the standard preanalytical code, incident reporting, and DNA concentration and absorbance ratio 260/280 assessments. Detailed sociodemographic, health, medication, and preexisting condition data were gathered. In five months, 2262 participants were enrolled, pseudonymized, and sorted by disease severity. The average Amerindian ancestry considering all participant was 44.0% [SD 15.5%], and this value increased to 61.2% [SD 19.5%] among those who self-identified as Native South Americans. Notably, 279 participants self-identified with one of 12 ethnic groups. High compliance (>90%) in all assessed quality controls was achieved. Looking ahead, our team founded the COVID-19 Genomics Network (C19-GenoNet) focused on identifying genetic factors influencing SARS-CoV-2 outcomes. In conclusion, this bottom-up collaborative effort aims to promote the integration of Latin American populations into global genetic research and welcomes collaborations supporting this endeavor. Interested parties are invited to explore collaboration opportunities through our catalog, accessible online.

Optimization of the DNA isolation procedure for assessing the genetic diversity of essential oil roses (Rosa L.)

Background. High content of organic compounds that worsen nucleic acid purification in aromatic plants, as well as the use of such toxic substances as phenol and mercaptoethanol in many protocols for plant DNA isolation, make it advisable to take the above disadvantages into account when optimizing the DNA extraction technique for the work with essential oil rose plants. Material and methods. Rose accessions from the Crimean Federal University’s Botanical Garden, and those from the collection held by the Research Institute of Agriculture of Crimea were included in the study. DNA extraction was done according to a modified CTAB protocol. Effectiveness of the technique was assessed using spectrophotometry, horizontal electrophoresis, and ISSR-PCR. Results. DNA preparations extracted with the modified technique were well visualized on the electropherogram and demonstrated high spectrophotometric values. DNA content was twice as high in preparations isolated with an extraction buffer with PVP, compared to a PVP-free buffer. The concentration was also higher in DNA extracts from stems than that from leaves. Purity parameters expressed by the absorption ratios at wavelengths A260/280 and A260/230 were again higher for DNA extracts from stems isolated with an enriched buffer, the A260/230 ratio falling within the normal range only in DNA extracted from stems in the presence of PVP. Besides, DNA extracts were effectively purified from proteins without phenol or mercaptoethanol, due to double rinsing with a chloroform/isoamyl alcohol (24 : 1) mixture. Conclusion. Using rose stem tissues as the research material, adding 2% PVP to the extraction buffer, and twofold rinsing with a chloroform/isoamyl alcohol mixture made it possible to obtain DNA extracts with high concentrations and purity indices within normal ranges suitable for the ISSR analysis of essential oil rose genetic diversity.

Contrasting Alleles of OsNRT1.1b Fostering Potential in Improving Nitrogen Use Efficiency in Rice.

Nitrogen use efficiency (NUE) is important for the growth and development of rice and is significant in reducing the costs of rice production. OsNRT1.1b is involved in nitrate assimilation, and the alleles at position 21,759,092 on chromosome 10 clearly separate indica (Pathum Thani 1 (PTT1) and Homcholasit (HCS)) and japonica (Azucena and Leum Pua (LP)) rice varieties. Rice morphological and physiological traits were collected at three nitrogen levels (N0 = 0 kg ha-1, N7 = 43.75 kg ha-1, and N14 = 87.5 kg ha-1). Leaf and tiller numbers in PTT1 and HCS at N7 and N14 were two to three times higher than those at N0. At harvest, the biomass yield in PTT1 was the highest, while the total grain number in HCS was the maximum. The leaf widths and total chlorophyll contents (SPAD units) of Azucena and LP increased with nitrogen application as well as photosynthetic pigment parameters; for example, plant senescence reflectance indices (PSRIs), structure-insensitive pigment indices (SIPIs), and modified chlorophyll absorption ratio indices (MCARIs) were highly related in the japonica varieties. PTT1 and HCS, both carrying the A allele at OsNRT1.1b, had better NUE than Azucena and LP with the G allele. HCS, overall, had better NUE than PTT1. The translation to grain yield of assimilates was remarkable in PTT1 and HCS compared with Azucena and LP. In addition, HCS converted biomass for a 75% higher yield than PTT1. The ability of HCS to produce high yields was achieved even at N7 nitrogen fertilization, manifesting efficient use of nitrogen.

Assessing suitability of surface water from Oued El Gourzi for irrigation east of Alger

The study was conducted to determine the suitability of surface water from Oued El Gourzi for irrigation in the Fesdis area, Algeria, during irrigation season of July 2022. The suitability was assessed by analysing eight water samples collected from various sites along the Oued. A range of physicochemical parameters were examined, including EC, pH, Mg2+, Na+, Ca2+, K+, HCO3– and Cl–, alongside other indices such as sodium absorption ratio (SAR), soluble sodium percentage (SSP), residual sodium carbonate (RSC), permeability index (PI) and magnesium adsorption ratio (MAR) using standard procedures. The Richards classification shows that these waters are characterised by high salinity and low alkalinity hazard (C3–S1). According to the Wilcox classification, the majority of these waters are of doubtful quality, with only 25% exhibiting good quality for irrigation. Based on the RSC and MAR, all water samples are deemed safe and suitable for irrigation. However, PI values suggest that all sampling sites are of marginal quality for irrigation (class II). In terms of sodium and chloride concentration, all water samples were deemed unsuitable for irrigation. Based on these results, the waters pose risks for irrigation, particularly due to salinity, necessitating the implementation of special management practices and the selection of salt-tolerant crops.

An 8Tx/32Rx head-neck coil at 7T by combining 2Tx/32Rx Nova coil with 6Tx shielded coaxial cable elements.

Standard head coils used at 7T MRI suffer from high signal loss at lower brain regions and neck. This study aimed to increase the field of view (FOV) of a birdcage coil to image the lower brain regions and neck with a straightforward approach of using add-on transmit shielded coaxial cable coil (SCC) elements. A new head-neck coil was modeled as a combination of the 2Tx/32Rx Nova head coil and 6Tx SCC elements. The add-on transmit SCC elements have been produced. The full wave electromagnetic simulations were performed to analyze the coil geometry and estimate the local specific absorption ratio (SAR). The field maps and structural images were acquired in a phantom and in vivo on a 7T scanner. The computed SAR histogram revealed a peak of 4.08 W/kg. The simulated and measured maps are in good agreement. The manufactured coil's S-parameters are below 10 dB. The field measurements on a subject presented the increase in the FOV. The T1-weighted structural images of three subjects acquired with the head-neck coil showed increased coverage compared to the head coil only. Combining the 2Tx/32Rx Nova head coil and 6Tx SCC elements allowed imaging of the whole brain with an increased FOV down to the C4 spine. The coil stayed fully functional when different subjects were scanned. We conclude that the SCC transmit-only coils are a robust adjunct to conventional coil designs and can meaningfully enhance and expand their field of view.

Photo‐cationic polymerizable ceramic slurry for the fabrication of ceramic structures in three‐dimensional printing

AbstractCycloaliphatic epoxides exhibit post‐light irradiation heat‐induced polymerization, creating warp‐resistant green bodies during sintering. However, their use in light polymerization three‐dimensional (3D) printing is limited by slow photo‐curing speeds. In this study, a photo‐cationic polymerizable ceramic slurry was developed for 3D printing by mixing oxetane with cyclo‐aliphatic epoxide. This mixture improved photo‐curing speed, reduced resin viscosity, and enhanced the ceramic slurry's solid content. Additionally, we optimized the slurry by considering the specific and content ratio of photosensitizers and light absorbers. The optimized slurry polymerized unreacted functional groups in the polymer, improving the fracture strength of the green bodies through enhanced crosslinking density and uniformity in each layer. Ultimately, a sintered body without warpage was produced by the improved green bodies. This approach provides a solution related to controlling the photocuring speed and expands the potential applications of 3D printing in areas where the precision and stability of the printing material are required.

Electrocoagulation of landfill leachate: Transforming a hazardous residue into a source of irrigation water

Electrocoagulation of landfill leachate has been widely investigated, however, only few reports include the reuse of the treated water. In this work, treated leachate is evaluated as irrigation water. The main obstacle is the high Sodium Absorption Ratio (SAR=Na+/(Ca2++Mg2+)/2. Reducing this indicator involves decreasing Na+ and increasing Mg2+ or Ca2+. Sodium concentration reduction is difficult by electrochemical methods (E0 = −2.71 V); Ca2+ increasing is not feasible as it precipitates. Hence, the use of different Al-Mg anodes was tested tending to increase Mg2+ concentration in the treated water The alloy 88%wtAl-12%wtMg was able to remove 52.9% of COD, 98.1% of turbidity, 97.9% of color, obtaining a SAR of 8.2 meq·L−1, total hardness (TH) of 64.2 meq·L−1 and a soluble sodium percentage (SSP) of 75.8 meq·L−1. This was achieved by working at a current density of 15 mA cm−2, a treatment time of 15 min and a pH 5.0. The phytotoxicity of the treated leachate was evaluated by the germination index using Lactuca Sativa L., reaching a value of 83.2%, which is considered excellent for irrigation water. During growth, 3–4 primary leaves were observed in seedings after 21 days, similar to when potable water was used. The results demonstrate that electrocoagulation is an adequate treatment technique for the reuse of landfill leachate if appropriated materials are used as anodes working in well selected operational variables.

Hydrogeochemical evaluation and characterization of water quality in the Phewa Lake, Pokhara, Nepal.

The study was carried out in the Phewa Lake of Pokhara Metropolitan City, Gandaki Province, Nepal, for geochemical assessment and characterization of the lake water quality. A total of 28 water samples were collected in each season from the different zones of the lake in March 2022 (pre-monsoon) and November 2022 (post-monsoon). The lake exhibitedelevated levels of PO43-, NO3-, and NH3, indicating that anthropogenic activities are interfering the lake water. The significant differences in many monitored physicochemical parameters between the pre- and post-monsoon visualize dilution effect in the lake during post-monsoon. Piper diagram illustrates that the majority of water samples in the lake are of Ca-HCO3 type. Additionally, Piper diagram, Gibbs diagram, and Mixing plot illustrate that carbonate weathering is dominant in both seasons. Principal component analysis (PCA) reveals significant correlations among NO3-, SO42-, Na+, and Cl-, demonstrating that pollution in the lake water is attributed to agricultural activities and domestic effluents. In the majority of samples,water quality index (WQI) depicts that the lake water quality is very poor to poor in the pre-monsoon and poor to good in the post-monsoon. Sodium absorption ratio (SAR), % Na (percent sodium), electrical conductivity (EC), cation ratio of soil structural stability (CROSS), and United States Salinity Laboratory (USSL) diagram illustrate that the lake water is suitable for irrigation.

Atmospheric escape in hot Jupiters under sub-Alfvénic interactions

ABSTRACT Hot Jupiters might reside inside the Alfvén surface of their host star wind, where the stellar wind is dominated by magnetic energy. The implications of such a sub-Alfvénic environment for atmospheric escape are not fully understood. Here, we employ 3D radiation-magnetohydrodynamic simulations and Ly-$\alpha$ transit calculations to investigate atmospheric escape properties of magnetized hot Jupiters. By varying the planetary magnetic field strength ($B_\mathrm{p}$) and obliquity, we find that the structure of the outflowing atmosphere transitions from a magnetically unconfined regime, where a tail of material streams from the nightside of the planet, to a magnetically confined regime, where material escapes through the polar regions. Notably, we find an increase in the planet escape rate with $B_\mathrm{p}$ in both regimes, with a local decrease when the planet transitions from the unconfined to the confined regime. Contrary to super-Alfvénic interactions, which predicted two polar outflows from the planet, our sub-Alfvénic models show only one significant polar outflow. In the opposing pole, the planetary field lines connect to the star. Finally, our synthetic Ly-$\alpha$ transits show that both the red-wing and blue-wing absorptions increase with $B_\mathrm{p}$. Furthermore, there is a degeneracy between $B_\mathrm{p}$ and the stellar wind mass-loss rate when considering absorption of individual Ly-$\alpha$ wings. This degeneracy can be broken by considering the ratio between the blue-wing and the red-wing absorptions, as stronger stellar winds result in higher blue-to-red absorption ratios. We show that, by using the absorption ratios, Ly-$\alpha$ transits can probe stellar wind properties and exoplanetary magnetic fields.

Quantifying cellulose content in plastic-cellulose material mixtures

This study investigates the capabilities of various measurement techniques for quantifying the cellulose content in reject material from a carton recycling center, which consists of polyethylene, cellulose, and aluminum, along with impurities. Different measurement techniques, including Fourier Transform Infrared Spectroscopy combined with Attenuated Total Reflectance (FTIR-ATR), cellulose dissolution using cupri-ethylenediamine (CED) from plastic followed by gravimetric analysis, acid hydrolysis combined with chromatography, and Thermal Gravimetric Analysis TGA, are employed in this study. Acid hydrolysis combined with chromatography and TGA shows comparable results when compared to different techniques for analyzing pulper reject. Dissolution with CED showed also comparable results but shows higher variation than TGA or chromatography. FTIR absorbance ratio of 1025/2917 correlates with cellulose content, but it shows high variation and lacks sensitivity below 5% cellulose content in polyethylene. This limitation is attributed to factors such as the limited measurement area (1.8 mm) and the large particle size of the cellulose and LDPE mixtures, possibly caused by inadequate grinding of LDPE. In conclusion, TGA and acid hydrolysis combined with chromatography are the most reliable for quantifying cellulose content in recycling reject, providing more consistent and accurate results than FTIR-ATR or CED dissolution methods.

Assessment of groundwater quality for irrigation purpose in aquifers of the Upper Brahmaputra floodplains of Assam, India.

Groundwater is an essential natural resource for mankind. Due to various geogenic and anthropogenic causes, groundwater quality has raised serious concern over the years. In this study, groundwater quality was evaluated for its suitability for irrigation in the Jorhat and Golaghat Districts of Assam, India. A total of 100 groundwater samples were collected from shallow aquifers (< 35m) from different locations during the pre-monsoon season (March-April 2022). Groundwater in the study area is slightly alkaline in nature (mean pH value of 7.44). The average cations and anions chemistry are in the order of Na+ > Ca2+ > Mg2+ > K+ and HCO3- > Cl- > SO42- > CO32-, respectively. Ca-Mg-HCO3 followed by Na-Ca-HCO3-Cl are the primary water types in the study area. Pearson's correlation matrix showed a positive correlation between TDS and EC (r = 0.78) and sodium showed a positive correlation with TDS and bicarbonate (r = 0.62 and r = 0.65), respectively. Gibbs plot indicated that rock-water interaction is the dominant factor that controls the chemistry of the groundwater of the area. Irrigation parameters like Sodium Absorption Ratio (SAR), Permeability Index (PI), Magnesium Absorption Ratio (MAR), Kelly's Ratio (KR), and Irrigation Water Quality Index (IWQI) indicated that groundwater is overall suitable for irrigation. USSL diagram illustrated that most of the samples fell into the C2 (medium salinity) and S1 (low sodium hazard) categories. Wilcox plot showed the samples fell in excellent to good categories indicating fitness of groundwater for irrigation in the area.

Evaluating Groundwater Quality for Drinking and Irrigation Purposes and Health Risk Assessment in West Midnapore District of West Bengal, India

Groundwater quality in the West Midnapore district of West Bengal, India is affected by anthropogenic activities as well as by water quality of Subarnarekha and Kangsabati rivers. This study aims to assess quality of groundwater and river water for drinking and irrigation usage, and assess the health risks of the people consuming the water across the rivers. The study also explores the groundwater-river water interaction. The river water and groundwater samples were collected three times during monsoon season from 14 sites across the rivers. The samples were analyzed for 11 water quality parameters, i.e., pH, total dissolved solids (TDS), total hardness (TH), major anions and cations, and iron (Fe). The groundwater was found slightly acidic (mean pH ~ 6.71) and correlated with nitrate concentrations. Most of the water quality parameters were found within their permissible limits of drinking water. However, elevated concentrations of potassium (K), ammonium (NH4), magnesium (Mg), phosphate (PO4), sodium (Na), and Fe were detected at some places, which were likely due to use of fertilizers. Water quality index (WQI), sodium absorption ratio (SAR), and percentage Na values were computed to evaluate the groundwater quality. The mean WQI value of 37.07 showed that the majority of groundwater samples met drinking water standards. Groundwater was also found suitable for irrigation (SAR ~ 0.26 to 1.62 meq L-1 and percentage Na ~ 13.10% to 78.12%). Health risk assessments suggested minimal immediate risks, though high Na levels in certain areas raised concerns. Piper plot showed that increased calcium concentrations in groundwater were mainly due to interactions between river water and groundwater. Overall, groundwater quality did not present any harmful health hazards to the community. The findings of this study can be instrumental for groundwater managers in identifying potential areas for treating groundwater quality.