Rat Calvarial Defect Research Articles

Dual scaffold delivery of miR-210 mimic and miR-16 inhibitor enhances angiogenesis and osteogenesis to accelerate bone healing

Angiogenesis is critical for successful bone repair, and interestingly, miR-210 and miR-16 possess counter-active targets involved in both angiogenesis and osteogenesis: miR-210 acts as an activator by silencing EFNA3 & AcvR1b, while miR-16 inhibits both pathways by silencing VEGF & Smad5. It was thus hypothesized that dual delivery of both a miR-210 mimic and a miR-16 inhibitor from a collagen-nanohydroxyapatite scaffold system may hold significant potential for bone repair. Therefore, this systems potential to rapidly accelerate bone repair by directing enhanced angiogenic-osteogenic coupling in host cells in a rat calvarial defect model at a very early 4 week timepoint was assessed. In vitro, the treatment significantly enhanced angiogenic-osteogenic coupling of human mesenchymal stem cells, with enhanced calcium deposition after just 10 days in 2D and 14 days on scaffolds. In vivo, these dual-miRNA loaded scaffolds showed more than double bone volume and vessel recruitment increased 2.3 fold over the miRNA-free scaffolds. Overall, this study demonstrates the successful development of a dual-miRNA mimic/inhibitor scaffold for enhanced in vivo bone repair for the first time, and the possibility of extending this ‘off-the-shelf’ platform system to applications beyond bone offers immense potential to impact a myriad of other tissue engineering areas. Statement of significancemiRNAs have potential as a new class of bone healing therapeutics as they can enhance the regenerative capacity of bone-forming cells. However, angiogenic-osteogenic coupling is critical for successful bone repair. Therefore, this study harnesses the delivery of miR-210, known to be an activator of both angiogenesis and osteogenesis, and miR-16 inhibitor, as miR-16 is known to inhibit both pathways, from a collagen-nanohydroxyapatite scaffold system to rapidly enhance osteogenesis in vitro and bone repair in vivo in a rat calvarial defect model. Overall, it describes the successful development of the first dual-miRNA mimic/inhibitor scaffold for enhanced in vivo bone repair. This ‘off-the-shelf’ platform system offers immense potential to extend beyond bone applications and impact a myriad of other tissue engineering areas.

Glycoprotein Injectable Hydrogels Promote Accelerated Bone Regeneration through Angiogenesis and Innervation.

Glycoproteins are gaining prominence as multifunctional biomaterials. The study reports development of glycoprotein mucin as biomaterial promoting bone regeneration. Mucin 1 deletion has resulted in stiffer femoral bones with scarce presence of osteoblasts in trabecular linings and its role has been established in determining bone mass and mineralization. Limited information about its structure limits its processability, exploration as biomaterial, which is discussed in this study. The role of mucin in ECM (extracellular cellular matrix) formation validated by RNA sequencing analysis of human bone marrow derived mesenchymal stem cells is reported. The structure and stability of mucins is dependent on the presence of glycans in its structure. A thermosensitive hydrogel acquired from thermosensitive Poly (N-isopropyl acrylamide)-(PNIPAM) modified mucin and collagen is developed. The hydrogel demonstrates porous structure and mechanical strength. Newly formed bone tissue is observed at 8 weeks post-implantation in the hydrogel treated groups. The formation of blood vessels, nerves, and bone is observed with upregulation of angiopoietin (ANG), neurofilament heavy chain (NF-H), and osteoadherin (OSAD) or osteocalcin (OCN) respectively in rat calvarial defects. The outcome demonstrates that the thermosensitive injectable hydrogel accelerates repair and healing in calvarial bone defects making it a promising biodegradable biomaterial capable of regenerating bone by promoting angiogenesis and innervation.

Apoptotic vesicles derived from human red blood cells promote bone regeneration via carbonic anhydrase 1.

Apoptotic vesicles (apoVs) are nanoscale vesicles derived from billions of apoptotic cells involved in the maintenance of the human body's homeostasis. Previous researches have shown that some apoVs, such as those derived from mesenchymal stem cells, contribute to bone formation. However, those apoVs cannot be extracted from patients in large quantities, and cell expansion is needed before apoV isolation, which limits their clinical translation. Mature RBCs, which have no nuclei or genetic material, are easy to obtain, showing high biological safety as a source of extracellular vesicles (EVs). Previous studies have demonstrated that RBC-derived EVs have multiple biological functions, but it is unknown whether RBCs produce apoVs and what effect these apoVs have on bone regeneration. In this study, we isolated and characterized RBC-derived apoVs (RBC-apoVs) from human venous blood and investigated their role in the osteogenesis of human bone mesenchymal stem cells (hBMSCs). We showed that RBCs could produce RBC-apoVs that expressed both general apoVs markers and RBC markers. RBC-apoVs significantly promoted osteogenesis of hBMSCs and enhanced bone regeneration in rat calvarial defects. Mechanistically, RBC-apoVs regulated osteogenesis by transferring carbonic anhydrase 1 (CA1) into hBMSCs and activating the P38 MAPK pathway. Our results indicated that RBC-apoVs could deliver functional molecules from RBCs to hBMSCs and promote bone regeneration, pointing to possible therapeutic use in bone tissue engineering.

Alveolar mucosal cell spheroids promote extraction socket healing and osseous defect regeneration.

Alveolar mucosa could be a promising source of mesenchymal stem cells (MSCs) for regeneration therapeutics because it exhibits faster healing potential and can be easily collected with minimal periodontal disturbance. This study aimed to evaluate the potential of alveolar mucosal cell (AMC) spheroids for promoting extraction socket healing and calvarial osseous defect regeneration. AMCs were isolated from Sprague-Dawley rats. Antigenic and MSC surface marker expressions and trilineage differentiation capability were assessed. AMCs were then osteogenically stimulated (OAs) or unstimulated (UAs), self-aggregated to form spheroids, and encapsulated in gelatin hydrogel to fill rat extraction sockets or combined with freeze-dried bone graft (FDBG) to fill rat calvarial osseous defects. The outcome was assessed by gross observation, micro-CT imaging, and immunohistochemistry. AMCs highly expressed MSC surface markers, showed weak antigenicity, and were capable of trilineage differentiation at Passage 3. In the extraction sockets, wound closure, socket fill, keratinization, and proliferative activities were accelerated in those with AMC spheroids treatment. Socket fill and maturation were further promoted by OA spheroids. In the calvarial osseous defects, the mineralized tissue ratio was promoted with AMC spheroids/FDBG treatment, and bone sialoprotein expression and cell proliferation were more evident with OA spheroids/FDBG treatment. AMCs exhibited MSC properties with weak antigenicity. AMC spheroids promoted extraction socket healing, AMC spheroids/FDBG promoted calvarial osseous defect regeneration, and the outcomes were further enhanced by osteogenically stimulation of AMCs.

The osteogenic and angiogenic potential of microRNA-26a delivered via a non-viral delivery peptide for bone repair

Bone-related injuries and diseases are among the most common causes of morbidity worldwide. Current bone-regenerative strategies such as auto- and allografts are invasive by nature, with adverse effects such as pain, infection and donor site morbidity. MicroRNA (miRNA) gene therapy has emerged as a promising area of research, with miRNAs capable of regulating multiple gene pathways simultaneously through the repression of post-transcriptional mRNAs. miR-26a is a key regulator of osteogenesis and has been found to be upregulated following bone injury, where it induces osteodifferentiation of mesenchymal stem cells (MSCs) and facilitates bone formation. This study demonstrates, for the first time, that the amphipathic, cell-penetrating peptide RALA can efficiently deliver miR-26a to MSCs in vitro to regulate osteogenic signalling. Transfection with miR-26a significantly increased expression of osteogenic and angiogenic markers at both gene and protein level. Using a rat calvarial defect model with a critical size defect, RALA/miR-26a NPs were delivered via an injectable, thermo-responsive Cs-g-PNIPAAm hydrogel to assess the impact on both rate and quality of bone healing. Critical defects treated with the RALA/miR-26a nanoparticles (NPs) had significantly increased bone volume and bone mineral density at 8 weeks, with increased blood vessel formation and mechanical properties. This study highlights the utility of RALA to deliver miR-26a for the purpose of bone healing within an injectable biomaterial, warranting further investigation of dose-related efficacy of the therapeutic across a range of in vivo models.

Efficacy of positive space acquiring membrane and antimicrobial membrane combined with granular bone substitute implantation in guiding oral bone regeneration.

Augmentation of the alveolar bone is important before oral implantation. For large bone defects, it becomes necessary to apply guided bone regeneration (GBR) materials, accompanied by filling defect sites with autologous or allogeneic bone, or bone substitutes such as acellular bone powder. In this study, we tested a granular bone substitute and GBR membrane combination therapy in treating MC3T3-E1 and L929 cells in vitro and rat calvarial and alveolar defects in vivo. The recovery conditions of bone defects were monitored by micro-CT, and 3D reconstruction of the CT images was applied to evaluate the bone augmentation semi-quantitatively. Test GBR materials could support the proliferation of MC3T3-E1 cells, poly (p-dioxanone-co-L-phenylalanine) (PDPA)-based membrane could induce apoptosis of L929 cells. Among GBR membranes applied groups, the regeneration condition of defected calvarial defects of PDPA based membrane applied group was the best and this may be caused by its excellent positive space acquiring effect. However, in a complex bacteriogenic environment, the oral bone regeneration-guided efficacy of the PDPA membrane decreased in the post-repair stage with the aggravation of infections. By contrast, the antimicrobial membrane combined with the PDPA membrane exhibited continually increasing GBR efficacy at the later stage of repair owing to its multifunctional properties, which are infection-inhibiting and positive space acquiring. Therefore, multifunctional GBR membranes are preferable for GBR in complex oral environments, and further research should be conducted to determine their efficacy in other models.

Effects of Ag Nanoparticles Impregnated Over Chitosan-Agarose Modified Magnetic Nanocomposite as an Efficient Reusable Nano Catalyst on Bone Regeneration in a Rat Calvarial Defect Model and Screening System

The development of multifunctional biomaterials with precise design and synthesis is desired for various fields of medicine and biology. Nanomaterials and nanotechnology have a huge potential to be applied and develop multifunctional and sophisticated nano- and biomaterials. In this study, we synthesized silver nanoparticles (AgNPs) and applied them into Chitosan-Agarosemodified magnetic nanocomposite to develop an efficient reusable Nano catalyst. The fabricated AgNPs were characterized using Transmission electron microscopy and results showed that AgNPs were partially spherical with uniform morphology and a size of 22±6 nm. Measuring the zeta potential showed that AgNPs possess a negative surface potential of around −27.7 mV which is desired for the stability of AgNPs. The AgNPs were incorporated into a Chitosan-Agarose modified magnetic nanocomposite and TEM and EDX analysis confirmed homogenous dispersion of AgNPs into the nanocomposite. The cell culture (in vitro) studies conducted using the MTT assay kit confirmed the biocompatibility of the fabricated nanocomposite. The animal study (the implantation of the nanocomposite in rat calvarial defect model) showed that the nanocomposite induced bone regeneration and filed the induced defect. These resultant findings suggested that the developed AgNPs-bearing nanocomposite can be applied as an efficient reusable Nano catalyst for bone regeneration.

A Comparative Study of HA/DBM Compounds Derived from Bovine and Porcine for Bone Regeneration.

This comparative study investigated the tissue regeneration and inflammatory response induced by xenografts comprised of hydroxyapatite (HA) and demineralized bone matrix (DBM) extracted from porcine (P) and bovine (B) sources. First, extraction of HA and DBM was independently conducted, followed by chemical and morphological characterization. Second, mixtures of HA/DBM were prepared in 50/50 and 60/40 concentrations, and the chemical, morphological, and mechanical properties were evaluated. A rat calvarial defect model was used to evaluate the tissue regeneration and inflammatory responses at 3 and 6 months. The commercial allograft DBM Puros® was used as a clinical reference. Different variables related to tissue regeneration were evaluated, including tissue thickness regeneration (%), amount of regenerated bone area (%), and amount of regenerated collagen area (%). The inflammatory response was evaluated by quantifying the blood vessel area. Overall, tissue regeneration from porcine grafts was superior to bovine. After 3 months of implantation, the tissue thickness regeneration in the 50/50P compound and the commercial DBM was significantly higher (~99%) than in the bovine materials (~23%). The 50/50P and DBM produced higher tissue regeneration than the naturally healed controls. Similar trends were observed for the regenerated bone and collagen areas. The blood vessel area was correlated with tissue regeneration in the first 3 months of evaluation. After 6 months of implantation, HA/DBM compounds showed less regenerated collagen than the DBM-only xenografts. In addition, all animal-derived xenografts improved tissue regeneration compared with the naturally healed defects. No clinical complications associated with any implanted compound were noted.

Effect of Mesenchymal Stem Cells Overexpressing BMP-9 Primed with Hypoxia on BMP Targets, Osteoblast Differentiation and Bone Repair.

Bone formation is driven by many signaling molecules including bone morphogenetic protein 9 (BMP-9) and hypoxia-inducible factor 1-alpha (HIF-1α). We demonstrated that cell therapy using mesenchymal stem cells (MSCs) overexpressing BMP-9 (MSCs+BMP-9) enhances bone formation in calvarial defects. Here, the effect of hypoxia on BMP components and targets of MSCs+BMP-9 and of these hypoxia-primed cells on osteoblast differentiation and bone repair was evaluated. Hypoxia was induced with cobalt chloride (CoCl2) in MSCs+BMP-9, and the expression of BMP components and targets was evaluated. The paracrine effects of hypoxia-primed MSCs+BMP-9 on cell viability and migration and osteoblast differentiation were evaluated using conditioned medium. The bone formation induced by hypoxia-primed MSCs+BMP-9 directly injected into rat calvarial defects was also evaluated. The results demonstrated that hypoxia regulated BMP components and targets without affecting BMP-9 amount and that the conditioned medium generated under hypoxia favored cell migration and osteoblast differentiation. Hypoxia-primed MSCs+BMP-9 did not increase bone repair compared with control MSCs+BMP-9. Thus, despite the lack of effect of hypoxia on bone formation, the enhancement of cell migration and osteoblast differentiation opens windows for further investigations on approaches to modulate the BMP-9-HIF-1α circuit in the context of cell-based therapies to induce bone regeneration.

Nacre-mimetic cerium-doped nano-hydroxyapatite/chitosan layered composite scaffolds regulate bone regeneration via OPG/RANKL signaling pathway

Autogenous bone grafting has long been considered the gold standard for treating critical bone defects. However, its use is plagued by numerous drawbacks, such as limited supply, donor site morbidity, and restricted use for giant-sized defects. For this reason, there is an increasing need for effective bone substitutes to treat these defects. Mollusk nacre is a natural structure with outstanding mechanical property due to its notable “brick-and-mortar” architecture. Inspired by the nacre architecture, our team designed and fabricated a nacre-mimetic cerium-doped layered nano-hydroxyapatite/chitosan layered composite scaffold (CeHA/CS). Hydroxyapatite can provide a certain strength to the material like a brick. And as a polymer material, chitosan can slow down the force when the material is impacted, like an adhesive. As seen in natural nacre, the combination of these inorganic and organic components results in remarkable tensile strength and fracture toughness. Cerium ions have been demonstrated exceptional anti-osteoclastogenesis capabilities. Our scaffold featured a distinct layered HA/CS composite structure with intervals ranging from 50 to 200 μm, which provided a conducive environment for human bone marrow mesenchymal stem cell (hBMSC) adhesion and proliferation, allowing for in situ growth of newly formed bone tissue. In vitro, Western-blot and qPCR analyses showed that the CeHA/CS layered composite scaffolds significantly promoted the osteogenic process by upregulating the expressions of osteogenic-related genes such as RUNX2, OCN, and COL1, while inhibiting osteoclast differentiation, as indicated by reduced TRAP-positive osteoclasts and decreased bone resorption. In vivo, calvarial defects in rats demonstrated that the layered CeHA/CS scaffolds significantly accelerated bone regeneration at the defect site, and immunofluorescence indicated a lowered RANKL/OPG ratio. Overall, our results demonstrate that CeHA/CS scaffolds offer a promising platform for bone regeneration in critical defect management, as they promote osteogenesis and inhibit osteoclast activation.

Accelerated reconstruction of rat calvaria bone defect using 3D-printed scaffolds coated with hydroxyapatite/bioglass

Self-healing and autologous bone graft of calvaraial defects can be challenging. Therefore, the fabrication of scaffolds for its rapid and effective repair is a promising field of research. This paper provided a comparative study on the ability of Three-dimensional (3D) printed polycaprolactone (PCL) scaffolds and PCL-modified with the hydroxyapatite (HA) and bioglasses (BG) bioceramics scaffolds in newly bone formed in calvaria defect area. The studied 3D-printed PCL scaffolds were fabricated by fused deposition layer-by-layer modeling. After the evaluation of cell adhesion on the surface of the scaffolds, they were implanted into a rat calvarial defect model. The rats were divided into four groups with scaffold graft including PCL, PCL/HA, PCL/BG, and PCL/HA/BG and a non-explant control group. The capacity of the 3D-printed scaffolds in calvarial bone regeneration was investigated using micro computed tomography scan, histological and immunohistochemistry analyses. Lastly, the expression levels of several bone related genes as well as the expression of miR-20a and miR-17-5p as positive regulators and miR-125a as a negative regulator in osteogenesis pathways were also investigated. The results of this comparative study have showed that PCL scaffolds with HA and BG bioceramics have a great range of potential applications in the field of calvaria defect treatment.

Conditioned Media from Human Pulp Stem Cell Cultures Improve Bone Regeneration in Rat Calvarial Critical-Size Defects.

The aim of this study was to test whether lyophilized conditioned media from human dental pulp mesenchymal stem cell cultures promote the healing of critical-size defects created in the calvaria of rats. Prior to the surgical procedure, the medium in which dental pulp stem cells were cultured was frozen and lyophilized. After general anesthesia, an 8 mm diameter bone defect was created in the calvaria of twenty-four rats. The defects were filled with the following materials: xenograft alone (G1) or xenograft associated with lyophilized conditioned medium (G2). After 14 or 42 days, the animals were euthanized, and the specimens processed for histologic and immunohistochemical analysis. Bone formation at the center of the defect was observed only in the G2 at 42 days. At both timepoints, increased staining for VEGF, a marker for angiogenesis, was observed in G2. Consistent with this, at 14 days, G2 also had a higher number of blood vessels detected by immunostaining with an anti-CD34 antibody. In conclusion, conditioned media from human dental pulp mesenchymal stem cell cultures had a positive effect on the regenerative process in rat critical-size bone defects. Both the formation of bone and enhancement of vascularization were stimulated by the conditioned media.

Role of individual and combined impact of simvastatin and α-TCP in rat calvarial bone defect: An experimental study

BackgroundBone substitutes have been used by doctors for a long time to treat osseous abnormalities. Recently, scientists have been searching for suitable materials to replace bone. Autogenous bone grafts are considered the gold standard for osseous regeneration. However, the limited availability of intraoral sources for grafting material often requires the use of secondary donor sites. AimThis study aims to compare a control group of standard critical bone defect models treated without any bone transplants to critical size calvarial bony defects treated with various bone replacements, including simvastatin and α-tricalcium phosphate, while analyzing the healing patterns. Materials and MethodsIn this investigation, 24 Wistar Albino rats weighing 200–250 g were utilized. The study included four groups, each consisting of six rats. Group I utilized deproteinized bovine xenograft, Group II used Simvastatin (0.1 mg), Group III used Simvastatin (0.1 mg) plus TCP, and Group IV served as the untreated calvarial defects group. After eight weeks of testing, the rats were euthanized, and the calvaria were extracted, decalcified in 20% formic acid, and prepared for histological analysis. ResultsThe newly produced osseous tissue consisted of woven and lamellar bone, which was observed in all deformities. The mean widths of new bone development in the SIMV with α-TCP (Group III) group after XENO (Group I) and the control group with no graft implantation were 160.33 ± 16.2 µm, 110.59 ± 11.5 µm, and 50.83 ± 5.5 µm, respectively. However, these differences did not show statistical significance (p > 0.05). ConclusionsThe quantity and quality of newly produced osseous tissue were comparable in α-TCP with SIMV and XENO. However, inflammatory infiltration was 8more pronounced in regions where SIMV was present alone compared to the combination group.

In vivo evaluation of bone regeneration using ZIF8-modified polypropylene membrane in rat calvarium defects.

The profound potential of zeolitic imidazolate framework 8 (ZIF8) thin film for inducing osteogenesis has been previously established under in vitro conditions. As the next step towards the clinical application of ZIF8-modified substrates in periodontology, this in vivo study aimed to evaluate the ability of the ZIF8 crystalline layer to induce bone regeneration in an animal model defect. Following the mechanical characterization of the membranes and analysing the in vitro degradation of the ZIF8 layer, in vivo bone regeneration was evaluated in a critical-sized (5-mm) rat calvarial bone defect model. For each animal, one defect was randomly covered with either a polypropylene (PP) or a ZIF8-modified membrane (n = 7 per group), while the other defect was left untreated as a control. Eight weeks post surgery, bone formation was assessed by microcomputed tomography scanning, haematoxylin and eosin staining and immunohistochemical analysis. The ZIF8-modified membrane outperformed the PP membrane in terms of mechanical properties and revealed a trace Zn+2 release. Results of in vivo evaluation verified the superior barrier function of the ZIF8-coated membrane compared with pristine PP membrane. Compared with the limited marginal bone formation in the control and PP groups, the defect area was almost filled with mature bone in the ZIF8-coated membrane group. Our results support the effectiveness of the ZIF8-coated membrane as a promising material for improving clinical outcomes of guided bone regeneration procedures, without using biological components.

Poly (acrylic acid)/tricalcium phosphate nanoparticles scaffold enriched with exosomes for cell-free therapy in bone tissue engineering: An in vivo evaluation

Introduction: This study aimed to assess the potential of poly (acrylic acid)/tricalcium phosphate nanoparticles (PAA/triCaPNPs) scaffold in terms of biocompatibility and osteoconductivity properties the in-vivo evaluation as well as to investigate the performance of PAA/triCaPNPs scaffold (with or without exosomes derived from UC-MSCs) for bone regeneration of rat critical-sized defect. Methods: PAA/triCaPNPs scaffold was made from acrylic acid (AA) monomer, N,N’-methylenebisacrylamide (MBAA), sodium bicarbonate (SBC), and ammonium persulfate (APS) through freeze-drying method. For in vivo evaluation, we randomly divided 24 rats into three groups. The rat calvarial bone defects were treated as follows: (1) Control group: defects without any treatment, (2) scaffold group: defects treated with scaffold only, (3) scaffold+exo group: defects treated with scaffold enriched with exosomes (1 μg/μl ,150 μg/per rat). Eight- and 12-weeks post-surgery, half of the animals were sacrificed and bone regeneration was examined through micro-computerized tomography (µ-CT), histological staining, and immunohistochemistry (IHC). Results: Quantitative analysis based on µ-CT scan images at 8 and 12 weeks post-implantation clearly indicated that healing rate for defects that were filled with scaffold enriched with exosome was significantly higher than defects filled with scaffold without exosome. The H&E and Masson staining results revealed that more new bone-like form developed in the scaffold+exo group than that in control and scaffold groups. Further, IHC staining for osteocalcin and CD31 confirmed that more bone healing in the scaffold+exo group at 12 weeks could be associated with osteogenesis and angiogenesis concurrently. Conclusion: In the present study, we aimed to investigate the therapeutic potential of PAA/triCaPNPs scaffold as a carrier of human UC-MSC-derived exosome to achieve the exosome-controlled release on calvarial bone defect. The in vivo results indicated that the exosome-enriched scaffold could effectively minify the defect area and improve the bone healing in rat model, and as such it could be an option for exosome-based therapy.

Nanosilicate-functionalized nanofibrous membrane facilitated periodontal regeneration potential by harnessing periodontal ligament cell-mediated osteogenesis and immunomodulation

Although various new biomaterials have enriched the methods for periodontal regeneration, their efficacy is still controversial, and the regeneration of damaged support tissue in the periodontium remains challenging. Laponite (LAP) nanosilicate is a layered two-dimensional nanoscale, ultrathin nanomaterial with a unique structure and brilliant biocompatibility and bioactivity. This study aimed to investigate the effects of nanosilicate-incorporated PCL (PCL/LAP) nanofibrous membranes on periodontal ligament cells (PDLCs) in vitro and periodontal regeneration in vivo. A PCL/LAP nanofibrous membrane was fabricated by an electrospinning method. The characterization of PCL/LAP nanofibrous membrane were determined by scanning electron microscopy (SEM), energy dispersive spectrum of X-ray (EDS), inductively coupled plasma mass spectrometry (ICP-MS) and tensile test. The proliferation and osteogenic differentiation of PDLCs on the PCL/LAP nanofibrous membrane were evaluated. A PDLCs and macrophage coculture system was used to explore the immunomodulatory effects of the PCL/LAP nanofibrous membrane. PCL/LAP nanofibrous membrane was implanted into rat calvarial and periodontal defects, and the regenerative potential was evaluated by microcomputed topography (micro-CT) and histological analysis. The PCL/LAP nanofibrous membrane showed good biocompatibility and bioactivity. It enhanced the proliferation and osteogenic differentiation of PDLCs. The PCL/LAP nanofibrous membrane also stimulated anti-inflammatory and pro-remodeling N2 neutrophil formation, regulated inflammatory responses and induced M2 macrophage polarization by orchestrating the immunomodulatory effects of PDLCs. The PCL/LAP nanofibrous membrane promoted rat calvarial defect repair and periodontal regeneration in vivo. LAP nanosilicate-incorporated PCL membrane is capable of mediating osteogenesis and immunomodulation of PDLCs in vitro and accelerating periodontal regeneration in vivo. It could be a promising biomaterial for periodontal regeneration therapy.

Copper Ion-Modified Germanium Phosphorus Nanosheets Integrated with an Electroactive and Biodegradable Hydrogel for Neuro-Vascularized Bone Regeneration.

Severe bone defects accompanied by vascular and peripheral nerve injuries represent a huge orthopedic challenge and are often accompanied by the risk of infection. Thus, biomaterials with antibacterial and neurovascular regeneration properties are highly desirable. Here, a newly designed biohybrid biodegradable hydrogel (GelMA) containing copper ion-modified germanium-phosphorus (GeP) nanosheets, which act as neuro-vascular regeneration and antibacterial agents, is designed. The copper ion modification process serves to improve the stability of the GeP nanosheets and offers a platform for the sustained release of bioactive ions. Study findings show that GelMA/GeP@Cu has effective antibacterial properties. The integrated hydrogel can significantly boost the osteogenic differentiation of bone marrow mesenchymal stem cells, facilitate angiogenesis in human umbilical vein endothelial cells, and up-regulate neural differentiation-related proteins in neural stem cells in vitro. In vivo, in the rat calvarial bone defect mode, the GelMA/GeP@Cu hydrogel is found to enhance angiogenesis and neurogenesis, eventually contributing to bone regeneration. These findings indicate that in the field of bone tissue engineering, GelMA/GeP@Cu can serve as a valuable biomaterial for neuro-vascularized bone regeneration and infection prevention.

A biomimetic piezoelectric scaffold with sustained Mg2+ release promotes neurogenic and angiogenic differentiation for enhanced bone regeneration.

Natural bone is a composite tissue made of organic and inorganic components, showing piezoelectricity. Whitlockite (WH), which is a natural magnesium-containing calcium phosphate, has attracted great attention in bone formation recently due to its unique piezoelectric property after sintering treatment and sustained release of magnesium ion (Mg2+). Herein, a composite scaffold (denoted as PWH scaffold) composed of piezoelectric WH (PWH) and poly(ε-caprolactone) (PCL) was 3D printed to meet the physiological demands for the regeneration of neuro-vascularized bone tissue, namely, providing endogenous electric field at the defect site. The sustained release of Mg2+ from the PWH scaffold, displaying multiple biological activities, and thus exhibits a strong synergistic effect with the piezoelectricity on inhibiting osteoclast activation, promoting the neurogenic, angiogenic, and osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSCs) in vitro. In a rat calvarial defect model, this PWH scaffold is remarkably conducive to efficient neo-bone formation with rich neurogenic and angiogenic expressions. Overall, this study presents the first example of biomimetic piezoelectric scaffold with sustained Mg2+ release for promoting the regeneration of neuro-vascularized bone tissue in vivo, which offers new insights for regenerative medicine.

Nanoscale β-TCP-Laden GelMA/PCL Composite Membrane for Guided Bone Regeneration.

Major advances in the field of periodontal tissue engineering have favored the fabrication of biodegradable membranes with tunable physical and biological properties for guided bone regeneration (GBR). Herein, we engineered innovative nanoscale beta-tricalcium phosphate (β-TCP)-laden gelatin methacryloyl/polycaprolactone (GelMA/PCL-TCP) photocrosslinkable composite fibrous membranes via electrospinning. Chemo-morphological findings showed that the composite microfibers had a uniform porous network and β-TCP particles successfully integrated within the fibers. Compared with pure PCL and GelMA/PCL, GelMA/PCL-TCP membranes led to increased cell attachment, proliferation, mineralization, and osteogenic gene expression in alveolar bone-derived mesenchymal stem cells (aBMSCs). Moreover, our GelMA/PCL-TCP membrane was able to promote robust bone regeneration in rat calvarial critical-size defects, showing remarkable osteogenesis compared to PCL and GelMA/PCL groups. Altogether, the GelMA/PCL-TCP composite fibrous membrane promoted osteogenic differentiation of aBMSCs in vitro and pronounced bone formation in vivo. Our data confirmed that the electrospun GelMA/PCL-TCP composite has a strong potential as a promising membrane for guided bone regeneration.

Mesenchymal Stem Cells Combined with a P(VDF-TrFE)/BaTiO3 Scaffold and Photobiomodulation Therapy Enhance Bone Repair in Rat Calvarial Defects.

Tissue engineering and cell therapy have been the focus of investigations on how to treat challenging bone defects. This study aimed to produce and characterize a P(VDF-TrFE)/BaTiO3 scaffold and evaluate the effect of mesenchymal stem cells (MSCs) combined with this scaffold and photobiomodulation (PBM) on bone repair. P(VDF-TrFE)/BaTiO3 was synthesized using an electrospinning technique and presented physical and chemical properties suitable for bone tissue engineering. This scaffold was implanted in rat calvarial defects (unilateral, 5 mm in diameter) and, 2 weeks post-implantation, MSCs were locally injected into these defects (n = 12/group). Photobiomodulation was then applied immediately, and again 48 and 96 h post-injection. The μCT and histological analyses showed an increment in bone formation, which exhibited a positive correlation with the treatments combined with the scaffold, with MSCs and PBM inducing more bone repair, followed by the scaffold combined with PBM, the scaffold combined with MSCs, and finally the scaffold alone (ANOVA, p ≤ 0.05). The P(VDF-TrFE)/BaTiO3 scaffold acted synergistically with MSCs and PBM to induce bone repair in rat calvarial defects. These findings emphasize the need to combine a range of techniques to regenerate large bone defects and provide avenues for further investigations on innovative tissue engineering approaches.