Rapid Temperature Increase Research Articles

Deciphering Paleocene‐Eocene Thermal Maximum Climatic Dynamics: Insights From Oxygen and Hydrogen Isotopes in Clay Minerals of Paleosols From the Southern Pyrenees

AbstractThis study focuses on the Paleocene‐Eocene Thermal Maximum (PETM), a hyperthermal event characterized by a rapid increase in global temperature (5–8°C) over 20 ka, in the Southern Pyrenean Foreland Basin. Although there is evidence of increased flood discharge and erosion in the Southern Pyrenees, how paleoclimatic conditions and weathering evolved remains to be assessed. This study focuses on the catchment scale climatological changes recorded in the clay minerals of floodplain paleosols, giving insights into how rainfall affected the weathering regime during and after the hyperthermal event. The oxygen (δ18O) and hydrogen (δD) isotope compositions were analyzed in two clay fractions in paleosols of the Esplugafreda continental section. The clay minerals comprise a dominant smectite‐rich assemblage, which indicates a predominantly seasonal, semi‐arid climate throughout the section. Two positive excursions in the δ18O record during the Pre‐Onset Excursion (POE) and the Syn‐PETM support an increase in air near‐surface temperature. Using the δD and δ18O smectite fractionation factors, we estimate a Mean Annual Air Temperature (MAAT) of 24.2 ± 1.0°C for the POE and 27.0 ± 0.8°C for the Syn‐PETM. The δD values show a relatively stable composition during the climatic disturbance, which suggests that this mid‐latitude catchment was overall characterized by low yearly rainfall, with a peak in extreme events during the body of the PETM and a trend toward aridification during the recovery phase of the PETM, supported by the paleosol morphotype. These climatic conditions suggest a kinetically controlled weathering regime, where physical transport of the sediments played a primary role as a denudation mechanism.

Optimal duration of whole-body cryostimulation exposure to achieve target skin temperature: influence of body mass index—a randomized cross-over controlled trial

BackgroundThe efficacy of whole-body cryostimulation (WBC) may be influenced by individual characteristics. The aim of this study is to determine the optimal exposure time required to reach the analgesic threshold of 13.6 °C, which has been proposed to be a target temperature to be reached at skin level. Our objective is also to follow the skin temperature changes during and after WBC considering the participants body mass index (BMI).MethodsThirty healthy men were assigned into 2 groups based on their BMI [normal weight (n = 15; BMI = 21.53 ± 1.63 kg·m−2) and overweight (n = 15; BMI = 27.98 ± 1.16 kg·m−2)]. In a random order, each participant experienced a 4-min WBC exposure, as well as a control session with no cold exposure. Skin temperature was measured using a thermal imaging camera during and after cold exposure.ResultsNormal weight participants reached the threshold in 4 min, whereas overweight participants reached it in 3 min 30 s. Following WBC, a rapid mean skin temperature (MsT°) increase was observed for both groups, immediately after exposure. However, after 30 min, MsT° remained significantly lower than at baseline.ConclusionOur findings suggest that appropriate WBC dosage may differ according to BMI. Understanding the impact of such variable on cold exposure outcomes can help to optimize WBC treatments and maximize potential benefits.

Development of membrane distillation powered by engine exhaust for water desalination

To address water shortage in arid areas and make use of waste heat, an experimental investigation is presented for a novel system of air gap membrane distillation unit driven by an engine exhaust heat source for the development of an on-board car water desalination. The design of the gas-to-water heat exchanger is presented and optimized. The system’s performance, governed by the achieved feed water temperature and measured by the output vapor mass flux, is evaluated with time under varying operational parameters, including engine load, engine speed, and feed water flow rate, with the analysis of production cost for economic viability. Experimental results revealed that higher engine loads and speeds lead to rapid temperature increase of the feed water, enhancing the efficiency of the membrane distillation process and increasing the permeate flux. Notably, a maximum permeate flux of 45 kg/m2h was achieved after 40 min of operation. A minimum production cost of 3.2 $/m3 is estimated at an engine load of 35 N.m. With production costs ranging from 3.2 to 5.8 $/m3, the proposed system emerges as a highly competitive option when compared with other membrane distillation systems driven by waste heat in literature. This study underscores the potential of utilizing waste heat from car engines for cost-effective and sustainable water desalination, paving the way for further development and implementation of the system as a mobile desalination unit for different applications.

High-temperature furnace for in situ GISAXS studies

Abstract A high-temperature furnace was constructed to perform in situ Grazing-Incidence Small-Angle X-ray Scattering (GISAXS) experiments at high temperatures for isothermal studies. The furnace consists of two interconnected chambers: (i) a main chamber housing the heating elements, where the sample is inserted during GISAXS measurements, and (ii) a pre-chamber where the sample is maintained near room temperature until the temperature in the main chamber reaches the pre-selected value. The two-chamber design allows a rapid increase of the sample temperature and avoids the sample overheating, conditions desirable for studies of the formation and growth of nanoparticles under isothermal annealing. In a practical application, the furnace was used to investigate the kinetics of the formation of NiSi2 silicide nanocrystals endotaxially grown in Si(001) wafers. This experiment allowed us to gain insights into the growth process and evaluate the performance of the furnace for in situ GISAXS studies. The high-temperature furnace provides a robust tool for studying the effect of annealing temperature on the kinetics of the growth of nanoparticles in thermally activated processes with special advantages in studies in which isothermal conditions are required.

Shear Band Formation with Split Hopkinson Bar Experiments

The essence of dynamic failure is closely linked to dramatic shear deformations which often lead to the formation of adiabatic shear bands (ASB). Under high loading velocities and the subsequent rapid temperature increase, the localization of shear strain is crucial in view of safety issues of systems in mechanical and aircraft engineering, especially with respect to fast rotating components and diverse crash scenarios. In this research, we perform high speed impact tests at the split Hopkinson pressure bar (SHPB) setup and use particular hat-shaped specimen geometries that resemble the stresses and failure conditions at the component level.In the first step, we specify a notched specimen geometry using finite element (FE) simulations to ensure pure shear. Further, quasi-static compressive tests and a series of impact tests at high strain rates of 103−104s−1 are conducted on specimens manufactured from a fine-grain structural steel with the properties of S355. Optical microscopy and electron backscatter diffraction (EBSD) of the sheared zones unveil significant localization to maximal shear strains of about 0.9 accompanied by grain refinement by factors 5 to 14. The displacements across the surface of the specimens are captured with subset-based local digital image correlation (DIC) during the impact time, and serve as an objective to validate a viscoplastic constitutive relationship. More precisely, the deformation distribution is accurately reproduced by the widely recognized Johnson-Cook (JC) model, which features an enhanced description of damage evolution. Thus, combining experimental and characterization techniques, continuum mechanics and reasonable optimization strategies for the identification of model parameters provides an efficient approach for comprehensive insights into the strain localization behaviour and its impact on the mechanical performance of S355 under extreme strain rates and deformations.

Thermal Fault-Tolerant Asymmetric Dual-Winding Motors in Integrated Electric Braking System for Autonomous Vehicles

A conventional dual-winding (DW) motor has two internal windings consisting of a master part and a slave part, each connected to a different electronic control unit (ECU) to realize a redundant system. However, existing DW motors have a problem related to heat generation in both the healthy mode and the faulty mode of the motor operation. In the healthy mode, unexpected overloads can cause both windings to burn out simultaneously due to equal heat distribution. If the current sensor fails to measure correctly, the motor may exceed the designed current density of 4.7 [Arms/mm2] under air-cooling conditions, further increasing burnout risk. External factors such as excessive load cycles or extreme heat conditions can further exacerbate this issue. In the faulty mode, the motor requires double the current to generate maximum torque, leading to rapid temperature increases and a high risk of overheating. To address these challenges, this paper proposes the design of a thermal fault-tolerant asymmetric dual-winding (ADW) motor, which improves heat management in both healthy and faulty modes for autonomous vehicles. A lumped-parameter thermal network (LPTN) with a piecewise stator-housing model (PSMs) was employed to evaluate the coil temperature during faulty operation. An optimal design approach, incorporating kriging modeling, Design of Experiments (DOE), and a genetic algorithm (GA), was also utilized. The results confirm that the proposed ADW motor design effectively reduces the risk of simultaneous burnout in the healthy mode and overheating in the faulty mode, offering a robust solution for autonomous vehicle applications.

Multifunctional 1–octadecanol/expanded graphite/Fe3O4 composite phase change materials with effective solar–to–thermal and magnetic–to–thermal conversion and storage

Composite phase change materials (CPCMs) with multifunctional thermal conversion and storage abilities have demonstrated exceptional properties for diverse energy storage applications recently; however, these composite materials often encounter limitations of low heat storage capacity and high cost. In this study, novel 1–octadecanol (OD)/expanded graphite (EG)/Fe3O4 CPCMs were facilely prepared and characterized for multifunctional thermal conversion and storage properties. The composites showed excellent thermal energy storage capacities, reaching 185.5 J/g at 80 % OD accompanied by high crystallization fractions of above 95 %. In addition, they exhibited great thermal conductivities, excellent leakage resistance, thermal stability, and reliability. Under simulated solar irradiation, the prepared OD/EG/Fe3O4 CPCMs exhibited a rapid temperature increase from 34 to 70 °C, achieving solar–to–thermal conversion efficiency of 80.2–90.5 %. This behavior can be attributed to its ability to capture and convert photons into thermal energy, facilitated by the synergistic effects of the conjugated double–bond system of EG and localized surface plasmon resonance of Fe3O4 nanoparticles. Furthermore, the prepared OD/EG/Fe3O4 CPCMs exhibited superparamagnetic properties, accelerating their temperatures from 32 °C to 88 °C within 11–23 s when subjected to an alternating magnetic field. This demonstrates magnetic–to–thermal conversion and storage ability. These findings highlight the potential of OD/EG/Fe3O4 CPCMs as promising and cost–effective materials for various practical thermal storage applications.

Laser-Assisted Photo-Thermal Reaction for Ultrafast Synthesis of Single-Walled Carbon Nanotube/Copper Nanoparticles Hybrid Films as Flexible Electrodes.

The hybridization of single-walled carbon nanotubes (SWCNTs) and Cu nanoparticles offers a promising strategy for creating highly conductive and mechanically stable fillers for flexible printed electronics. In this study, we report the ultrafast synthesis of SWCNT/Cu hybrid nanostructures and the fabrication of flexible electrodes under ambient conditions through a laser-induced photo-thermal reaction. Thermal energy generated from the nonradiative relaxation of the π-plasmon resonance of SWCNTs was utilized to reduce the Cu-complex (known as a metal-organic decomposition ink) into Cu nanoparticles. We systematically investigated the effects of SWCNT concentration and output laser power on the structural and electrical properties of the SWCNT/Cu hybrid electrodes. The SWCNT/Cu electrodes achieved a minimum electrical resistivity of 46 μohm·cm, comparable to that of the metal-based printed electrodes. Mechanical bending tests demonstrated that the SWCNT/Cu electrodes were highly stable and durable, with no significant deformation observed even after 1000 bending cycles. Additionally, the electrodes showed rapid temperature increases and stable Joule heating performance, reaching temperatures of nearly 80 °C at an applied voltage of less than 3.5 V.

Evaluation of Sentinel-5P TROPOMI Methane Observations at Northern High Latitudes

The Arctic and boreal regions are experiencing a rapid increase in temperature, resulting in a changing cryosphere, increasing human activity, and potentially increasing high-latitude methane emissions. Satellite observations from Sentinel-5P TROPOMI provide an unprecedented coverage of a column-averaged dry-air mole fraction of methane (XCH4) in the Arctic, compared to previous missions or in situ measurements. The purpose of this study is to support and enhance the data used for high-latitude research through presenting a systematic evaluation of TROPOMI methane products derived from two different processing algorithms: the operational product (OPER) and the scientific product (WFMD), including the comparison of recent version changes of the products (OPER, OPER rpro, WFMD v1.2, and WFMD v1.8). One finding is that OPER rpro yields lower XCH4 than WFMD v1.8, the difference increasing towards the highest latitudes. TROPOMI product differences were evaluated with respect to ground-based high-latitude references, including four Fourier Transform Spectrometer in the Total Carbon Column Observing Network (TCCON) and five EM27/SUN instruments in the Collaborative Carbon Column Observing Network (COCCON). The mean TROPOMI–TCCON GGG2020 daily median XCH4 difference was site-dependent and varied for OPER rpro from −0.47 ppb to 22.4 ppb, and for WFMD v1.8 from 1.2 ppb to 19.4 ppb with standard deviations between 13.0 and 20.4 ppb and 12.5–15.0 ppb, respectively. The TROPOMI–COCCON daily median XCH4 difference varied from −26.5 ppb to 5.6 ppb for OPER rpro, with a standard deviation of 14.0–28.7 ppb, and from −5.0 ppb to 17.2 ppb for WFMD v1.8, with a standard deviation of 11.5–13.0 ppb. Although the accuracy and precision of both TROPOMI products are, on average, good compared to the TCCON and COCCON, a persistent seasonal bias in TROPOMI XCH4 (high values in spring; low values in autumn) is found for OPER rpro and is reflected in the higher standard deviation values. A systematic decrease of about 7 ppb was found between TCCON GGG2014 and GGG2020 product update highlighting the importance of also ensuring the reliability of ground-based retrievals. Comparisons to atmospheric profile measurements with AirCore carried out in Sodankylä, Northern Finland, resulted in XCH4 differences comparable to or smaller than those from ground-based remote sensing.

Temperature Is a Key Factor Governing the Toxic Impact of Ultra-Violet Radiation-Emitting Nail Dryers When Used on Human Skin Cells.

The skin is the largest organ in the body and the only one to come into contact with solar UV radiation (UVR). UVA (320-400nm) is a significant contributor to UV-related skin damage. The UVA spectrum makes up over 95% of solar-UV energy reaching the earth's surface causing the majority of the visible signs of skin photoaging. Many consumer products also emit UVA, including nail dryers. There have been sporadic reports suggesting that these units may be contributing to skin cancer incidence. This notion was recently bolstered by a finding that nail dryer-irradiated mammalian skin cells develop a mutational signature consistent with UVA exposure. This report was surprising considering the comparatively low level of UVA to which the skin is exposed during nail treatments. In this research, we investigated how UVA-emitting devices caused cytotoxic/genotoxic impact after only low levels of UVA exposure. Our data showed that levels of UVA in the unit are highly variable and location dependent. We confirm previous reports that using prolonged exposure protocols could induce significant levels of DNA damage. It was also determined that UV-induced DNA damage only partially correlated with the level of UVA fluency. On investigation, we found that the unit had a rapid increase in internal temperature when in use. Exposing human cells to these elevated temperatures acted synergistically with UVA to magnify the cytotoxic and genotoxic impact of UV irradiation.

Turning Points in Vegetation Phenology Trends and Their Relationship to Climate in Arid Central Asia

AbstractGrassland phenology is highly sensitive to climate change. Here, we investigate the spatiotemporal patterns of start (start of season (SOS)) and end (end of season (EOS)) dates of the growing season and quantify changes in their climatic controls over the arid Central Asian grassland ecosystems during 1982–2015, which may improve the model performance by considering shifts in primary drivers under ongoing climate change. Our results suggest that temperature played a positive role in advancing the SOS date, with the control of temperature on SOS getting stronger as preseason conditions become warmer but not drier. For autumn phenology, rapid increase in temperature after 1999 in combination with reductions in precipitation jointly contributed to a shift from delayed to advanced EOS. The areas that EOS regulated by either temperature or precipitation have changed between the two subperiods. Our findings suggest that the dynamic controls of temperature and precipitation on grassland phenology and the difference between spring and autumn phenology should be built into phenological models more accurately.

Compact lab-on-printed circuit board (PCB) for free-surfactant silver nanomaterial synthesis

This study introduces a compact Lab-on-Printed Circuit Board (PCB) device featuring thermal integrated microfluidic channels designed for nanoparticle synthesis. Commonly, complex heating chambers are employed to expedite reactions and enhance nanomaterial productivity, yet they pose challenges in temperature control and mixing rates within the reaction chamber. To address these issues, we propose a compact device composed of PDMS microfluidic channels and a PCB platform. The PCB heater, constructed to precisely regulate temperature within the microfluidic channels, utilizes copper lines as heating resistors, while an Arduino kit is employed for temperature measurement and control. Leveraging a Proportional–integral–derivative (PID) controller through programming, the device achieves rapid temperature increase and stable control within the microfluidic channels. Experimental validation demonstrates the operational principles and capabilities of this device, showcasing observable changes in nanoparticle size and morphology. Discussions on these observed results are included in this work.

Machine learning-based analysis and prediction of meteorological factors and urban heatstroke diseases.

Heatstroke is a serious clinical condition caused by exposure to high temperature and high humidity environment, which leads to a rapid increase of the core temperature of the body to more than 40°C, accompanied by skin burning, consciousness disorders and other organ system damage. This study aims to analyze the effect of meteorological factors on the incidence of heatstroke using machine learning, and to construct a heatstroke forecasting model to provide reference for heatstroke prevention. The data of heatstroke incidence and meteorological factors in a city in South China from May to September 2014-2019 were analyzed in this study. The lagged effect of meteorological factors on heatstroke incidence was analyzed based on the distributed lag non-linear model, and the prediction model was constructed by using regression decision tree, random forest, gradient boosting trees, linear SVRs, LSTMs, and ARIMA algorithm. The cumulative lagged effect found that heat index, dew-point temperature, daily maximum temperature and relative humidity had the greatest influence on heatstroke. When the heat index, dew-point temperature, and daily maximum temperature exceeded certain thresholds, the risk of heatstroke was significantly increased on the same day and within the following 5 days. The lagged effect of relative humidity on the occurrence of heatstroke was different with the change of relative humidity, and both excessively high and low environmental humidity levels exhibited a longer lagged effect on the occurrence of heatstroke. With regard to the prediction model, random forest model had the best performance of 5.28 on RMSE and dropped to 3.77 after being adjusted. The incidence of heatstroke in this city is significantly correlated with heat index, heatwave, dew-point temperature, air temperature and zhongfu, among which the heat index and dew-point temperature have a significant lagged effect on heatstroke incidence. Relevant departments need to closely monitor the data of the correlated factors, and adopt heat prevention measures before the temperature peaks, calling on citizens to reduce outdoor activities.

Experimental system and method of aerobic thermal environment simulation based on laser heating

Considering the superior luminous intensity characteristics of lasers, a thermal simulation platform employing laser-induced heating in an aerobic environment was developed. Achieving a uniformly distributed flat-topped square laser beam output was facilitated through optical fibre bundling techniques, while precise control over laser power output was attained through current modulation. Utilising the aforementioned system, thermal shock simulation experiments were conducted in an aerobic environment, subjecting two types of high-temperature-resistant composites, namely C/C and C/SiC, to temperatures up to 1800 °C. These composites were lightweight, heat-resistant materials designed for hypersonic vehicle applications. The results show that the system and method can be used to simulate high temperatures, rapid temperature increases, and thermal shocks on C/C composite materials, with minimal variation in the coupling coefficient under aerobic conditions. The system and method can also provide key technology support for thermal-force-oxygen coupling testing of high temperature resistant materials.

A 70-year perspective on water-mass transformation in the Greenland Sea: From thermobaric to thermal convection

The hydrography of the central Greenland Sea was reconstructed from observations including bottle measurements, Conductivity/ Temperature/ Depth (CTD) measurements, and Argo floats for the period 1950 to 2020. Greenland Sea Deep Water was renewed during bottom-reaching convection prior to the mid-1980s, facilitated by the thermobaric effect. During a period of shallow convection in the late 1980s and early 1990s, a stratification maximum formed and isolated the deep from the intermediate Greenland Sea. As a consequence, convection was limited to depths shallower than 2000m during the past decades and a new class of intermediate water formed instead of deep water. The initial cause for the formation of the stratification maximum was a near-surface freshwater anomaly. A subsequent, rapid temperature and salinity increase in the upper 2000m resulted in an overall density reduction of the intermediate water which strengthened the stratification maximum. Along with the transition from formation of deep water to formation of intermediate water, the Greenland Sea became temperature-stratified at intermediate depths. This regime-shift in stratification can be traced to increased temperature and salinity in the inflowing Atlantic-origin Water. Below the stratification maximum, the Greenland Sea Deep Water became warmer and more saline, predominantly caused by lateral mixing with deep water masses from adjacent basins. The hydrographic changes in the Greenland Sea were investigated in the context of a reduction of the sea-ice extent and associated changes in winter heat loss. While interannual variability of convection depth may depend on atmospheric forcing, we found that the decadal variability of water-mass transformation in the Greenland Sea was largely determined by the hydrographic structure of the water column.

Enhancing equipment qualification testing facility for nuclear power plants: Achieving rapid temperature and pressure increase during design basis events

The present study focuses on the development of an equipment qualification (EQ) testing facility for Class 1E equipment in nuclear power plants (NPPs), emphasizing the need to ensure safety functions under design basis events (DBEs). The Republic of Korea (ROK) has implemented international safety standards to support large NPP projects, necessitating the development of domestic EQ testing facilities to reduce the dependence on foreign facilities. To address this need, herein, a specialized facility capable of simulating harsh DBE conditions that may occur in NPPs in ROK was constructed. Through exhaustive research, target temperature and pressure profiles were developed for pressurized water reactors, and a superheated steam injection technique was devised for rapid temperature and pressure changes. The present study contributes to the advancement of domestic EQ testing capabilities, achieving up to 230 °C and 700 kPa within 30 s.

Aptamer-Modified Nb2C Multifunctional Nanomedicine for Targeted Photothermal/Chemotherapy Combined Therapy of Tumor.

The poor delivery efficiency of nanotherapeutic drugs and their potential off-target toxicity significantly limit their effectiveness and extensive application. An active targeting system with high efficiency and few side effects is a promising strategy for tumor therapy. Herein, a multifunctional nanomedicine Nb2C-PAA-DOX@Apt-M (NDA-M) was constructed for targeted photothermal/chemotherapy (PTT/CHT) combined tumor therapy. The specific targeting ability of aptamer could effectively enhance the absorption of nanomedicine by the MCF-7 cell. By employing Apt-M, the NDA-M nanosheets demonstrated targeted delivery to MCF-7 cells, resulting in enhanced intracellular drug concentration. Under 1060 nm laser irradiation, a rapid temperature increase of the NDA-M was observed within the tumor region to achieve PTT. Meanwhile, CHT was triggered when DOX release was induced by photothermal/acid stimulation. The experimental results demonstrated that aptamer-mediated targeting achieved enhanced PTT/CHT efficacy both in vitro and in vivo. Notably, NDA-M induced complete ablation of solid tumors without any adverse side effects in mice. This study demonstrated new and promising tactics for the development of nanomaterials for targeted tumor therapy.

Greening of Svalbard

Svalbard, located between 76°30′N and 80°50′N, is among the regions in the world with the most rapid temperature increase. We processed a cloud-free time-series of MODIS-NDVI for Svalbard. The dataset is interpolated to daily data during the 2000–2022 period with 232 m pixel resolution. The onset of growth, with a clear phenological definition, has been mapped each year. Then the integrated NDVI from the onset (O) of growth each year to the time of average (2000–2022) peak (P) of growth (OP NDVI) have been calculated. OP NDVI has previously shown high correlation with field-based tundra productivity. Daily mean temperature data from 11 meteorological stations are compared with the NDVI data. The OP NDVI values show very high and significant correlation with growing degree days computed from onset to time of peak of growth for all the meteorological stations used. On average for the entire Svalbard, the year 2016 first had the highest greening (OP NDVI values) recorded since the year 2000, then the greening in 2018 surpassed 2016, then 2020 surpassed 2018, and finally 2022 was the year with the overall highest greening by far for the whole 2000–2022 period. This shows a rapid recent greening of Svalbard very strongly linked to temperature increase, although there are regional differences: the eastern parts of Svalbard show the largest variability between years, most likely due to variability in the timing of sea-ice break-up in adjacent areas. Finally, we find that areas dominated by manured moss-tundra in the polar desert zone require new methodologies, as moss does not share the seasonal NDVI dynamics of tundra communities.

Biochar-Poultry Manure Compost Alters Temperature and Nitrogen Dynamics during Composting and Improves Potato Growth Following Field Application

Composting is an aerobic process that transforms organic wastes into valuable agricultural product, but the composting process frequently results in losses of nitrogen (N) through NH3 volatilization. We evaluated the potential for high-temperature, wood-based biochar to reduce N loss when included as a compost feedstock. Biochar was composted with wood shavings and poultry manure (4:1 v/v) at rates of 0, 20 and 40% (v/v) in replicated, actively aerated 1.43 m3 in-vessel compost piles. Biochar addition caused more rapid temperature increase and truncated thermophilic phase. N loss from the entire compost mass was reduced with 40% and 20% biochar addition compared to the control (29.9, 32.3, and 35.6% N loss, respectively; P value = 0.027). However, assuming no N was lost from the added biochar, difference in N loss was less significant (P value = 0.100). With 40% biochar addition, finished compost had greater NO3 --N concentration, lower electrical conductivity, greater carbon to nitrogen ratio, and greater total carbon content. Compost products were amended to soil at rates of 7 or 15 Mg C ha−1 in potato production. Relative to an unamended control, the high application rates tended to decrease bulk density and increase total N in soil, but no differences were detected between the compost or composted biochar treatments. Tuber weights were increased 40% with application of composted biochar (biochar 40% v/v). Biochar is a promising bulking agent for composting which may reduce N loss and increase nitrification. Future studies should examine how specific biochar products affect the compost process, nutrient retention, and crop production.

Shock-ignition effect in indirect-drive inertial confinement fusion approach.

Shock-ignition effect in indirect-drive thermonuclear target is demonstrated on the base of numerical simulations. Thermonuclear gain (in relation to laser pulse energy) of a shock-ignited indirect-drive thermonuclear capsule is obtained, which is 22.5 times higher than that at a traditional spark ignition of the capsule with the same DT-fuel mass, wherein the shock-ignition laser pulse energy is 1.5 times less than the energy of a laser pulse at traditional spark ignition. To implement the shock-ignition effect in indirect-drive target, a rapid increase in radiation temperature is required over several hundred picoseconds at the final stage of thermonuclear capsule implosion. The ability of such a rapid response of radiation temperature to variation in the intensity of an x-ray-producing laser pulse is the main factor in the uncertainty of the degree of manifestation of the shock-ignition effect in an indirect-drive target. This circumstance, first of all, requires experimental study.