Raman Microspectroscopic Research Articles

Quantification of Polystyrene Uptake by Different Cell Lines Using Fluorescence Microscopy and Label-Free Visualization of Intracellular Polystyrene Particles by Raman Microspectroscopic Imaging.

Environmental pollution caused by plastic is a present problem. Polystyrene is a widely used packaging material (e.g., Styrofoam) that can be broken down into microplastics through abrasion. Once the plastic is released into the environment, it is dispersed by wind and atmospheric dust. In this study, we investigated the uptake of polystyrene particles into human cells using A549 cells as a model of the alveolar epithelial barrier, CaCo-2 cells as a model of the intestinal epithelial barrier, and THP-1 cells as a model of immune cells to simulate a possible uptake of microplastics by inhalation, oral uptake, and interaction with the cellular immune system, respectively. The uptake of fluorescence-labeled beads by the different cell types was investigated by confocal laser scanning microscopy in a semi-quantitative, concentration-dependent manner. Additionally, we used Raman spectroscopy as a complementary method for label-free qualitative detection and the visualization of polystyrene within cells. The uptake of polystyrene beads by all investigated cell types was detected, while the uptake behavior of professional phagocytes (THP-1) differed from that of adherent epithelial cells.

The landscape of micron-scale particles including microplastics in human enclosed body fluids.

Exogenous microparticles including microplastics are novel pollutants that could persist in the environment with potential health effects, while crucial data on their exposure in humans are still lacking. To understand the panorama of microparticles including microplastics exposure and distribution characteristics in different kinds of body fluids. A non-targeted microparticle internal exposure landscape analysis was done in thirteen kinds of human enclosed body fluids covering eight body systems. Totally 104 patients aged 24-96 years with an average age of 56 years were included in this study. After sample digestion, non-soluble microparticles were detected and identified with one Raman Microspectroscope under a strict quality control-particle detection system. Totally 702 microparticles with size ranging from 2.15 to 103.27µm were detected in samples. Microparticles were identified into 84 substances or 66 molecules, most of which were firstly reported inside human body. Nine kinds of microplastics were originally reported in human body fluids with their size ranging from 19.66 to 103.27µm. Microparticles exposure was unexpectedly high inside the human body despite the protection of biological barriers and membranes, raising awareness of the impact of particle pollution on sustainable development.

Raman Microspectroscopic Investigation and Classification of Breast Cancer Pathological Characteristics.

Breast cancer is one of the major cancers of women in the world. Despite significant progress in its treatment, an early diagnosis can effectively reduce its incidence rate and mortality. To improve the reliability of Raman-based tumor detection and analysis methods, we conducted an ex vivo study to unveil the compositional features of healthy control (HC), solid papillary carcinoma (SPC), mucinous carcinoma (MC), ductal carcinoma in situ (DCIS), and invasive ductal carcinoma (IDC) tissue samples. Following the identification of biological variations occurring as a result of cancer invasion, principal component analysis followed by linear discriminate analysis (PCA-LDA) algorithm were adopted to distinguish spectral variations among different breast tissue groups. The achieved results confirmed that after training, the constructed classification model combined with the leave-one-out cross-validation (LOOCV) method was able to distinguish the different breast tissue types with 100% overall accuracy. The present study demonstrates that Raman spectroscopy combined with multivariate analysis technology has considerable potential for improving the efficiency and performance of breast cancer diagnosis.

In vitro Label Free Raman Microspectroscopic Analysis to Monitor the Uptake, Fate and Impacts of Nanoparticle Based Materials.

The continued emergence of nanoscale materials for nanoparticle-based therapy, sensing and imaging, as well as their more general adoption in a broad range of industrial applications, has placed increasing demands on the ability to assess their interactions and impacts at a cellular and subcellular level, both in terms of potentially beneficial and detrimental effects. Notably, however, many such materials have been shown to interfere with conventional in vitro cellular assays that record only a single colorimetric end-point, challenging the ability to rapidly screen cytological responses. As an alternative, Raman microspectroscopy can spatially profile the biochemical content of cells, and any changes to it as a result of exogenous agents, such as toxicants or therapeutic agents, in a label free manner. In the confocal mode, analysis can be performed at a subcellular level. The technique has been employed to confirm the cellular uptake and subcellular localization of polystyrene nanoparticles (PSNPs), graphene and molybdenum disulfide micro/nano plates (MoS2), based on their respective characteristic spectroscopic signatures. In the case of PSNPs it was further employed to identify their local subcellular environment in endosomes, lysosomes and endoplasmic reticulum, while for MoS2 particles, it was employed to monitor subcellular degradation as a function of time. For amine functionalized PSNPs, the potential of Raman microspectroscopy to quantitatively characterize the dose and time dependent toxic responses has been explored, in a number of cell lines. Comparing the responses to those of poly (amidoamine) nanoscale polymeric dendrimers, differentiation of apoptotic and necrotic pathways based on the cellular spectroscopic responses was demonstrated. Drawing in particular from the experience of the authors, this paper details the progress to date in the development of applications of Raman microspectroscopy for in vitro, label free analysis of the uptake, fate and impacts of nanoparticle based materials, in vitro, and the prospects for the development of a routine, label free high content spectroscopic analysis technique.

Microanalysis of Single Poly(N-isopropylacrylamide) Droplet Produced by an Optical Tweezer in Water: Isotacticity Dependence of Growth and Chemical Structure of the Droplet.

Thermoresponsive phase separation mechanisms of aqueous poly(N-isopropylacrylamide) (PNIPAM) solutions were investigated using an optical tweezer combined with a Raman microspectroscope. A near-infrared laser beam (λ = 1064 nm) was focused into the solution to produce and trap a single polymer microdroplet under an optical microscope. The laser beam played two important roles: The first role is to locally heat the solution to induce phase separation in which numerous polymer microdroplets are generated around the focus, while the second one is to collect these microdroplets. Eventually, a single polymer droplet was stably produced and trapped at the focus. Our method enabled us to perform two types of microanalysis for the droplet. Analysis I is real-time monitoring the growth of the polymer droplets by which we can determine the growth rate of droplets. Analysis II is Raman microspectroscopy to reveal chemical components of the droplets. By means of these two analyses, we revealed important phase separation mechanisms in terms of stereoregularity (isotacticity) dependence. From analysis I, we show that droplet growth is governed by the Ostwald ripening mechanism and the growth is accelerated by increasing the isotacticity. From analysis II, we show that the gelation is promoted in the droplet (physical gel formation) with increasing isotacticity. Our technique should be a versatile tool to explore liquid-liquid phase separation mechanisms for various binary solution systems.

A Novel Two-Step Method for the Detection of Organic Gunshot Residue for Forensic Purposes: Fast Fluorescence Imaging Followed by Raman Microspectroscopic Identification.

Gunshot residue (GSR) is potentially key evidence during a criminal investigation of a shooting accident. Current standardized forensic science methods target the detection of inorganic GSR (IGSR). In this proof-of-concept study, a new two-step method for the detection and identification of organic GSR (OGSR) is proposed. This method utilizes highly sensitive fluorescence hyperspectral imaging of a sample area to detect potential GSR particles, followed by confirmatory identification of the detected particles using Raman microspectroscopy. In this study, two different GSR samples on adhesive tape substrates were created. One sample was made by manually placing a known amount of OGSR particles onto an adhesive tape substrate. The second sample mimicked a real crime scene situation and had an unknown number of GSR particles mounted onto an adhesive tape substrate using a most common tape-lifting procedure for the recovery of GSR from the skin of a suspect and other surfaces. These two samples were subjected to the developed two-step analysis method. It was found that this method was accurately able to detect and identify all OGSR particles. Representative spectra of OGSR particles showed characteristic Raman peaks at 850 cm-1, 1287 cm-1, and 2970 cm-1. This methodology offers a promising means to meet current needs within the framework of GSR analysis by providing a way to accurately detect and identify OGSR.

Raman Microspectroscopic Imaging of Binder Remnants in Historical Mortars Reveals Processing Conditions

Binder remnants in historical mortars represent a record of the connection between the raw materials that enter the kiln, the process parameters, and the end product of the calcination. Raman microspectroscopy combines high structural sensitivity with micrometre to sub-micrometre spatial resolution and compatibility with conventional thin-sectional samples in an almost unique fashion, making it an interesting complementary extension of the existing methodological arsenal for mortar analysis. Raman spectra are vibrational fingerprints of crystalline and amorphous compounds, and contain marker bands that are specific for minerals and their polymorphic forms. Relative intensities of bands that are related to the same crystalline species change according to crystal orientations, and band shifts can be caused by the incorporation of foreign ions into crystal lattices, as well as stoichiometric changes within solid solution series. Finally, variations in crystallinity affect band widths. These effects are demonstrated based on the analysis of three historical mortar samples: micrometric distribution maps of phases and polymorphs, crystal orientations, and compositional variations of solid solution series of unreacted clinker grains in the Portland cement mortars of two 19th century castings, and the crystallinities of thermal anhydrite clusters in a high-fired medieval gypsum mortar as a measure for the applied burning temperature were successfully acquired.

Raman Microspectroscopic Studies on Thermo-Responsive Polymer Rich Domains Formed by Optical Tweezers

Raman Microspectroscopic Studies on Thermo-Responsive Polymer Rich Domains Formed by Optical Tweezers

Raman Microspectroscopic Evidence for the Metabolism of a Tyrosine Kinase Inhibitor, Neratinib, in Cancer Cells.

Tyrosine kinase receptors are one of the main targets in cancer therapy. They play an essential role in the modulation of growth factor signaling and thereby inducing cell proliferation and growth. Tyrosine kinase inhibitors such as neratinib bind to EGFR and HER2 receptors and exhibit antitumor activity. However, little is known about their detailed cellular uptake and metabolism. Here, we report for the first time the intracellular spatial distribution and metabolism of neratinib in different cancer cells using label‐free Raman imaging. Two new neratinib metabolites were detected and fluorescence imaging of the same cells indicate that neratinib accumulates in lysosomes. The results also suggest that both EGFR and HER2 follow the classical endosome lysosomal pathway for degradation. A combination of Raman microscopy, DFT calculations, and LC‐MS was used to identify the chemical structure of neratinib metabolites. These results show the potential of Raman microscopy to study drug pharmacokinetics.

Raman Microspectroscopic Mapping with Multivariate Curve Resolution–Alternating Least Squares (MCR-ALS) Applied to the High-Pressure Polymorph of Titanium Dioxide, TiO2-II

The high-pressure, α-PbO2-structured polymorph of titanium dioxide (TiO2-II) was recently identified in micrometer-sized grains recovered from four Neoarchean spherule layers deposited between ∼2.65 and ∼2.54 billion years ago. Several lines of evidence support the interpretation that these layers represent distal impact ejecta layers. The presence of shock-induced TiO2-II provides physical evidence to further support an impact origin for these spherule layers. Detailed characterization of the distribution of TiO2-II in these grains may be useful for correlating the layers, estimating the paleodistances of the layers from their source craters, and providing insight into the formation of the TiO2-II. Here we report the investigation of TiO2-II-bearing grains from these four spherule layers using multivariate curve resolution-alternating least squares (MCR-ALS) applied to Raman microspectroscopic mapping. Raman spectra provide evidence of grains consisting primarily of rutile (TiO2) and TiO2-II, as shown by Raman bands at 174 cm-1 (TiO2-II), 426 cm-1 (TiO2-II), 443 cm-1 (rutile), and 610 cm-1 (rutile). Principal component analysis (PCA) yielded a predominantly three-phase system comprised of rutile, TiO2-II, and substrate-adhesive epoxy. Scanning electron microscopy (SEM) suggests heterogeneous grains containing polydispersed micrometer- and submicrometer-sized particles. Multivariate curve resolution-alternating least squares applied to the Raman microspectroscopic mapping yielded up to five distinct chemical components: three phases of TiO2 (rutile, TiO2-II, and anatase), quartz (SiO2), and substrate-adhesive epoxy. Spectral profiles and spatially resolved chemical maps of the pure chemical components were generated using MCR-ALS applied to the Raman microspectroscopic maps. The spatial resolution of the Raman microspectroscopic maps was enhanced in comparable, cost-effective analysis times by limiting spectral resolution and optimizing spectral acquisition parameters. Using the resolved spectra of TiO2-II generated from MCR-ALS analysis, a Raman spectrum for pure TiO2-II was estimated to further facilitate its identification.

Raman Microspectroscopic Mapping: A Tool for Identification of Fused Materials in Fire Debris.

Examination of fire debris can provide information about the types of materials which were present at the time of the fire to give insights for fire scene reconstruction and understanding compartment fire dynamics. This paper demonstrates the ability of Raman spectroscopy for material identification postfire in complex situations, such as the production of fused masses during fire dropdown. A validated Raman spectral library is combined with Raman mapping in three fire case studies, to determine the individual materials in the fused masses formed. The case studies accessed material combinations of several common polymers. Raman mapping was carried out on a 10 μm × 10 μm square of the masses. Material identification using this technique ranged from a high of 85% match to a low of 40% match. This work demonstrated that complex masses found in the fire debris can be resolved into the individual material components for identification and spatial distribution.

A method for an approximate determination of a polymer-rich-domain concentration in phase-separated poly(N-isopropylacrylamide) aqueous solution by means of confocal Raman microspectroscopy combined with optical tweezers

The paper demonstrates that a confocal Raman microspectroscope combined with optical tweezers is a promising technique to estimate polymer concentration in polymer-rich domain in phase-separated-aqueous polymer solution. The sample polymer is poly-(N-isopropylacrylamide) (PNIPAM) that is well-known as a representative thermo-responsive polymer. Optical tweezers can selectively trap the polymer-rich domain at the focal point in non-contact and non-intrusive modes. Such situation allows us to determine polymer concentration in the domain, which has been unclear due to a lack of appropriate analytical technique. It is applicable for a variety of other thermo-responsive polymers.

Raman Microspectroscopic study of Iberian pottery from the La Vispesa archaeological site, Spain

AbstractRaman microspectroscopy has been employed for the characterization of 16 samples of ancient Iberian pottery. These sherds of vessels were found in the archaeological site of La Vispesa in Tamarite de Litera (Huesca, Spain) and correspond to the Iberian time. The composition of certain mineral phases such as non‐plastic inclusions has been particularly considered with a view to obtaining information on the source materials and their provenance, as well as the technological conditions of ceramic production. Typical minerals such as calcite and quartz were found in most of the samples. The presence of anatase in a group of the samples suggested the use of different clays in the production of the vessels. Furthermore, the absence of rutile in these samples, together with the identification of calcite, is indicative of a mild firing temperature. Hematite was identified in all samples, both in the ceramic body and in the decoration. Differences in the position of the bands and relative intensities characterized hematite in terms of crystallinity and origin. An attempt to assign the samples to different production centers was made according to their chemical composition and morphology. Copyright © 2011 John Wiley & Sons, Ltd.

Imaging the cell wall of living single yeast cells using surface-enhanced Raman spectroscopy

The surface of a living yeast cell (Saccharomyces cerevisiae strain W303-1A) has been labeled with silver (Ag) nanoparticles that can form nanoaggregates which have been shown to have surface-enhanced Raman scattering (SERS) activity. The cell wall of a single living yeast cell has been imaged by use of a Raman microspectroscope. The SERS spectra measured from different Ag nanoaggregates were found to be different. This can be explained on the basis of detailed spectral interpretation. The SERS spectral response originates from mannoproteins which cover the outermost regions of the yeast cell wall. Analysis of SERS spectra from the cell wall and the extracted mannoproteins from the yeast has been performed for the clarification of variation in SERS spectra.

Raman Microspectroscopic Analysis of Size-Resolved Atmospheric Aerosol Particle Samples Collected with an ELPI: Soot, Humic-Like Substances, and Inorganic Compounds

Raman microspectroscopy and mapping have been applied for the analysis of soot, humic-like substances (HULIS) and inorganic compounds in size resolved samples of air particulate matter collected with an electrical low pressure impactor (ELPI). Using several reference materials, we found that spectral parameters determined by curve fitting with five bands (G, D1-D4) enable a discrimination of soot and HULIS and provide information about the relative abundance and structural order of graphite-like carbon. In particular, the D1 band width exhibited a near-linear negative correlation with the ratio of apparent elemental carbon to total carbon in different types of soot. The ELPI samples of sub-micrometer atmospheric particles exhibited essentially the same Raman spectra and parameters as standard diesel soot. In winter samples this was also the case for larger particles with aerodynamic diameters up to 4 μm. Spring and autumn samples, however, exhibited increased D1 band widths and D3 band intensities, indicating a high prevalence of HULIS in the size range of 2–4 μm. In addition, various nitrates and sulfates (mostly NaNO3 and (NH4)2SO4; some NH4NO3, Ca(NO3)2, Na2SO4, and CaSO4) and small amounts of CaCO3 were detected. Different single- and multi-component spectra indicated the presence of externally and internally mixed particles. The relative abundance of different chemical components in different particle size ranges was quantified in mapping experiments (0–55% NaNO3, 1–15% (NH4)2SO4, 10–45% soot/HULIS, 30–60% highly fluorescent organics). Overall, the results of this study demonstrate that Raman microspectroscopy and mapping can provide qualitative and quantitative information about the composition of ELPI aerosol samples.

Raman Microspectroscopic Analysis of Changes in the Chemical Structure and Reactivity of Soot in a Diesel Exhaust Aftertreatment Model System

Raman microspectroscopy has been applied to follow structural changes in spark discharge (GfG) soot and light-duty diesel vehicle (LDV) soot upon oxidation and gasification by nitrogen oxides and oxygen in a diesel exhaust aftertreatment model system at 523 and 573 K. Raman spectra have been recorded before and during the oxidation process, and spectral parameters have been determined by curve fitting with five bands (G, D1-D4). For GfG soot, a steep initial decrease of the relative intensity of the D3 band suggested rapid preferential oxidation of a highly reactive amorphous carbon fraction, while a less steep but also substantial decrease of band widths (in particular, the D1 band) indicated a slower overall increase of chemical homogeneity and structural order in the partially oxidized material. The spectroscopic changes are in agreementwith a strong decrease of chemical reactivity at increasing mass conversion of GfG soot. In contrast, the spectral parameters and reactivity of partially oxidized LDV soot remained largely unchanged throughout the oxidation process. Overall, the spectroscopic and kinetic findings suggest that Raman spectroscopic parameters provide information about the relative abundance and structural order of graphitelike and amorphous carbon and can be used as proxies for the chemical reactivity of soot undergoing oxidation and gasification. Thus, Raman spectroscopy promisesto become an efficient tool forfurther investigation and optimization of diesel exhaust aftertreatment in continuously regenerating traps and particle filters.

Studies on Stress-Induced Changes at the Subcellular Level by Raman Microspectroscopic Mapping

Raman microspectroscopic mapping enables one to study the chemical composition and molecular structure of subcellular components in individual cells without the need for labeling. Lung fibroblast cells were prepared under normal conditions and under stress, which was induced by 24 h of exposure to glyoxal. Raman microspectroscopic maps were recorded from fixed cells with 785-nm excitation and with 1-microm step width. Cluster analysis was applied to generate pseudocolor images of the cell morphology. Raman maps revealed that the cell nucleus shrinks in stressed cells, called pyknosis, which refers to an early stage of apoptosis. The intensity of nucleic acid bands decreased in cluster-averaged Raman spectra of the nucleus and cytoplasm, which is consistent with degradation and conformational changes of DNA and RNA. During a later stage of apoptosis, Raman maps indicate a rounding of cells, a further intensity decrease of nucleic acids bands, fragmentation of the nucleus, disappearance of lipid bodies, and formation of blisters at the cell surface. Whereas the peripheral membrane of the undisturbed cell is composed of lipids and cholesterol, the blisters have a higher protein content with nucleic acids incorporated. The results demonstrate that Raman spectroscopic mapping might become a powerful tool in cell biology for single cell analysis.

Deep Ultraviolet Raman Microspectroscopic Characterization of Polishing-Induced Surface Damage in SiC Crystals

We have investigated polishing-induced surface damage in nitrogen-doped {0001} 4H-SiC crystals with silicon and carbon faces through deep ultraviolet Raman microspectroscopy. The structural and electrical properties of the damaged layers were characterized as a function of the abrasive particle size, using pure phonon modes and a longitudinal-optical-phonon plasmon coupled mode as monitor bands. The degree of damage decreased with the size. Although abrasive polishing with finer particles enables the long-range order of the lattice to almost fully recover, the carrier density remains partly reduced in the polished surface layers. The number of defects that induces a reduction in the free carrier density differs between the Si and C faces of 4H-SiC crystals.

Raman Microspectroscopic Characterization of Amorphous Silica Plastic Behavior

Raman microspectroscopy was used to characterize amorphous silica plastic behavior. Using a correlation between Raman spectrum and density, a map of the local residual indentation‐induced densification was obtained. The existence of a densification‐induced hardening was also evidenced through a diamond–anvil cell experiment. Such observations are not accounted for by the previously proposed hardening‐free pressure‐dependent yield criterion based on indentation curves. These results open the way toward a more accurate description of a constitutive law for amorphous silica.

Raman Microspectroscopic Study on Polymerization and Degradation Processes of a Diacetylene Derivative at Surface Enhanced Raman Scattering Active Substrates. 1. Reaction Kinetics

Raman microspectroscopy was applied to study the polymerization kinetics of the Langmuir-Blodgett (LB) films of 10,12-pentacosadiynoic acid (DA) adsorbed on surface enhanced Raman scattering (SERS) active Ag island films. A two-dimensional (2D) Raman microscopic image measured at 1520 cm(-1) exhibits bright and dim spots with the diameter of several hundred nanometers. Raman microscopic spectra, measured by defocusing the excitation laser light (532 nm, diameter of ca. 10 mum) on the samples at room temperature, proved the occurrence of the surface processes consisting of the formation of polydiacetylene (PDA) in the blue phase, its conversion to the red phase, and subsequent bleaching. These reactions were negligible under the same condition for the DA-LB films prepared on a smooth (i.e., SERS-inactive) Ag film, indicating that the 532-nm-induced polymerization and the bleaching process are enhanced by the SERS-active substrates. At low temperatures below -50 degrees C, the Raman microscopic measurements proved the formation of the blue phase and its conversion to the red phase with much lower reaction rates compared to the corresponding rates at room temperature. The bleaching, however, was much suppressed at the low temperatures. The kinetic analyses of the formation of the blue phase and its conversion to the red phase were performed by using the intensity changes of the Raman bands due to the blue (1477 cm(-1)) and red (1517 cm(-1)) phases as a function of the irradiation time. The results strongly suggested the existence of at least two processes taking place simultaneously on the SERS-active substrates; that is, one of the processes is a sequential reaction, DA-monomers --> PDA in the blue phase --> PDA in the red phase, and the other is another sequential reaction, DA-monomers --> PDA in the red phase --> degradation species (probably amorphous carbon). Thus, even at the low temperatures, there occurs the surface reaction consisting of the formation of PDA and its degradation. The reaction can be ascribed to a process taking place at the highly SERS-active site, which gives the bright spot (so-called "hot spot") on the 2D Raman image, as proved by the confocal Raman microscopic measurement in the following paper.