Electromagnetic Shielding Research Articles

Composite Janus film based on the synergistic interactions of π-π stacking and dynamic covalent bond toward direction recognition sensing

Although flexible strain sensors have made important advancements recently, most of them are unable to recognize the direction of motion, which greatly limits their application in fields such as human-machine interaction. This paper presents the fabrication of a bilayer asymmetric composite film that exhibits Janus dual-sided characteristics and interfacial properties. Specifically, the two sides possess different chemical compositions and surface features. The strong π-π stacking interaction between carbon nanotubes (CNTs) and pyrene enables a tight coating on the surface of poly(glycidyl propyl urethane) (PGPU), resulting in excellent sensing capabilities and electromagnetic shielding properties for the composite material. This composite film can effectively monitor the amplitude and direction of motion. Firstly, pyrene-grafted polyurethane (PGPU) was synthesized including on dynamic covalent bonds. The tensile strength of different samples can reach up to 19.69 MPa, and the strain at break is up to 501.95 %. Furthermore, PGPU/CNTs conductive composite films were fabricated by spray-coating carbon nanotubes (CNTs) onto PGPU, and the pyrene units in PGPU can effectively interact with CNTs via π-π stacking, ensuring that stable adhesion of CNTs layer during long-term usage. Due to the dynamic covalent bonds and hydrogen bonds inside PGPU, PGPU and PGPU/CNTs both exhibit well-performed self-healing capability. Notably, the Janus structure of PGPU/CNTs can adjust the positive and negative values of relative resistance based on stretchable and compressive status of CNTs layer. Thus, PGPU/CNTs are directionally sensitive and self-healing flexible wearable sensor, which might apply in human-machine interaction field.

Enhancing electromagnetic interference mitigation: A comprehensive study on the synthesis and shielding capabilities of polypyrrole/cobalt ferrite nanocomposites

In a society increasingly infiltrated by digital and networking technologies, designing electromagnetic interference (EMI) shielding materials is critical for safeguarding sensitive electronic equipment and ensuring the smooth functioning of essential communication networks. This study focuses on the optimization of the properties of cobalt ferrite (CoFe2O4)/polypyrrole (PPy) nanocomposites made by in-situ polymerization used for electromagnetic (EM) shielding based on their magnetic and dielectric losses. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and vector network analyzer (VNA) were employed to study the materials' physical and chemical characteristics. The findings demonstrate that the magnetic and electric properties of the materials composed of CoFe2O4 and PPy are substantially altered by the integration of CoFe2O4 and PPy. Adding PPy to CoFe2O4 reduces the real and imaginary parts of magnetic permeability, and the conductivity, dielectric constant, and dielectric loss are increased. These effects are advantageous for EM shielding applications. The high electromagnetic shielding performance mainly results from the enhanced interfacial polarization induced by interface region among CoFe2O4 and PPy molecules. The influence of the PPy matrix in altering the dielectric and magnetic loss factors (tanδE and tanδM) of the embedded ferrite particles is pronounced. Although CoFe2O4 shows excellent attenuation characteristics, it cannot optimally match impedance with free space, particularly at higher frequencies. In addition, material thickness and shielding efficiency adjust the reflection loss (RL) performance. The prepared composites can attenuate more than 95 % of the incident electromagnetic waves. This study emphasizes the benefits of employing composite materials in EMI shielding designs and the combined advantages of conductive and magnetic materials.

Ultrabroadband and >93% Microwave Absorption Enabled by "Doped" Water Meta-Atom Lattice with Subwavelength Thickness.

Perfect microwave absorbers, which absorb electromagnetic waves completely, play pivotal roles in electromagnetic shielding, and stealth technologies. Existing microwave absorber technologies rely on either electromagnetic properties of absorptive materials, the resonance behavior of meta-atoms, or a combination of both. So far, achieving simultaneous broadband absorption, high efficiency, and compact sizes remains a great challenge. Inspired by atomic doping techniques employed in conventional optical materials to broaden spectral bandwidths, a single-layer microfluidic metasurface microwave absorber is proposed with the assembly of two distinct types of water meta-atoms. By manipulating electromagnetic resonances of these water meta-atoms, the metasurface maintains impedance matching over a broad working range. A microwave absorber design with a thickness equivalent to 0.2 times the central wavelength is showcased, measuring over 93% absorption across both K and Ka bands (17.5-40.0GHz). The results highlight unprecedented superiorities of microwave absorbers based on a 2D doped water meta-atom lattice when compared to previously reported metasurface absorbers utilizing identical meta-atoms. This absorber has advantages including small thickness, broad bandwidth, and cost-effectiveness, making it promising for applications in electromagnetic shielding, camouflage, and multi-spectral stealth.

Research on Efficient Electromagnetic Shielding Performance and Modulation Mechanism of Aero/Organo/Hydrogels with Gravity-Induced Asymmetric Gradient Structure.

To eliminate electromagnetic pollution, it is a challenging task to develop highly efficient electromagnetic shielding materials that integrate microwave absorption (MA) performance with high shielding capability and achieve tunability in shielding performance. Asymmetrically structured aero/organo/hydrogels with a progressively changing concentration gradient of liquid metal nanoparticles (LMNPs), induced by gravity, are prepared by integrating the conductive fillers Ti3C2Tx MXene and LMNPs into a dual-network structure composed of polyvinyl alcohol and cellulose nanofibers. Benefiting from the unique structure, which facilitates the absorption-reflection-reabsorption process of electromagnetic waves along with conductive fillers and the porous structure, three types of gels demonstrate efficient shielding performance. HPCML achieves a total shielding effectiveness (SET) of up to 86.9dB and a reflection shielding effectiveness (SER) of as low as 2.85dB. Especially, APCML, with an ultra-low reflection coefficient (R) of 6.4%, achieves compatibility between shielding performance and MA properties. The relationship between dispersing media (air, water, and glycerol/water) and the shielding performance of aero/organo/hydrogels is explored, thereby achieving modulation of the shielding performance of the gel system. The work has paved a clear path for integrating absorption and shielding capabilities into a composite material, thereby providing a prototype of a highly efficient shielding material with MA performance.

Preparing efficient self-healing polyimide coating for enhancing stability of electromagnetic interference shielding film

Electromagnetic interference (EMI) shielding films were widely utilized in various electronic devices, but they were prone to damage and performance degradation in harsh environments. Therefore, it was urgent to maintain stable performance of EMI shielding films. In this work, we adopt the reactions between aldehyde-modified diamine monomers and dianhydride monomers with dynamic imine bond to successfully prepare a self-healing PI (SHPI) film. Benefit from dynamic imine and imide bond, the SHPI film possessed excellent thermal stability (T5 %=527.7°C), tensile strength (72 MPa) and self-healing efficiency (94.4 %). As protecting coating layer, the SHPI film was able to maintain the commercial aluminized polyimide (PI/Al) film with good EMI shielding performance in acid environment. The electromagnetic shielding film with self-healing coating still had average EMI shielding effectiveness value of 44.5 dB after exposed to 10 % concentration nitric acid solution for 30 min. It is noteworthy that when damaged by external forces, the electromagnetic shielding film with self-healing coating could achieve rapid healing, while the tensile strength was up to 87 MPa and the self-healing efficiency reached 92.5 %. This work provided an effective self-healing protective layer for EMI shielding material against corrosion in acidic environments and damage from external pressures.

Zr4+ and Al3+ coordinated cross-linked conductive collagen fibers/solvent-free polyurethane foam with ultra-low reflective electromagnetic shielding properties

In recent years, electromagnetic shielding materials with low reflectance have developed rapidly. However, high material cost, poor bonding fastness, weak mechanical properties and other problems seriously limit its effect in practical use. In this work, flexible conductive collagen fibers (CLF-Zr4+/Al3+-CNTs) were prepared using chromium tanned waste leather as ingredient, carbon nanotubes (CNTs) as conductive filler and transition metal ions as coordination crosslinking agents, and their molecular dynamics were investigated by quantum chemical simulation software. On this basis, a flexible conductive foam with the double layer and double core-clad structure containing carbon nanotubes was constructed using the solvent-free polyurethane (SFPU) chemical foaming technology, and their electromagnetic shielding properties and reflectance were studied. The experiment results showed that when the ratio of CLF-Zr4+/Al3+-CNTs to SFPU polyol is 1:9 and the impregnation times of CNTs are 2, the loading capacity of CNTs in conductive foam is 0.14 mg/cm3, the electrical conductivity is 57.8 S/m, and the thermal conductivity is 0.061 W/(m·K). Meanwhile, when the thickness is 3 cm, the electromagnetic shielding performance is 42.09 dB, and the reflection efficiency is 0.66 %, the lowest reflection efficiency reaches 0.16 % in the experiment. The mechanism of electromagnetic shielding in conductive foams with the double layer and double core-clad structure has been further explored. The experiment results proved that the flexible conductive foam has excellent mechanical properties, stability, heat insulation and flame retardant properties, and has excellent electromagnetic shielding and low reflection characteristics due to its abundant holes, functional group, interface and hierarchical structure.

Liquid metal electromagnetic wave shielding and absorbing film for solving electromagnetic interference in flexible sensors

Liquid metal electromagnetic wave shielding and absorbing film for solving electromagnetic interference in flexible sensors

Synthesis of perylene‐PEO hyperdispersants for aqueous graphene dispersion

AbstractGraphene, with excellent thermal conductivity, electrical and corrosion shielding performance has great application potential in the fields of heat dissipation coating, conductive agent and anticorrosion composite coatings. However, due to its large specific surface area, resulting strong aggregation behavior limits its application. Herein, the hyperdispersants with perylene anchoring groups are synthesized through the amidation coupling reaction between diacid anhydride and polyetheramine. The branching degree and length of hydrophilic chains on hyperdispersant are revealed to be the very important factors to affect the dispersion stability of aqueous graphene dispersion. The hyperdispersant with a single hydrophilic chain and the molecular weight 2000 of polyetheramine has the excellent dispersal activity discovered by Rheology, particle size distribution and Raman measurements. The possible mechanism is the strongest anchoring effect of perylene on graphene surface and thus achieving in best effective spatial exclusion stabilization effect of hydrophilic chains.

Polarization-selective dual-band infrared metamaterial perfect absorber

Abstract Metamaterial absorbers have significant effects and great potential for applications in a variety of important sciences and technologies, including infrared imaging, thermal emitters, electromagnetic shielding, and photodetectors. However, conventional absorbers with a single function are difficult to meet the growing demand of devices, especially for the situations where the absorption and polarization are simultaneously required in infrared detection. If the polarization absorption function is realized by integrating absorption and polarization elements, it will lead to a large overall system size and slow response time. To solve this problem, we propose a dual-band polarization-selective metamaterial perfect absorber, whose maximum absorptions at resonant wavelengths of λ1=2.824μm and λ2=7.622μm are 99.99% and 99.88%, respectively. The absorber exhibits strong polarization sensitivity, absorbing TM-polarized incident light and reflecting TE-polarized incident light at the two resonant wavelengths. The extinction ratios of the absorber at the two referred resonant wavelengths are 90.9 and 142.7, respectively. The proposed absorber would be beneficial for infrared polarization detection and imaging.

Hybrid rib fabric electromagnetic shielding measurement in X-band

This study involves measurement and evaluation of the electromagnetic shielding effectiveness (EMSE) in the X-band frequency range of rib-knitted fabrics formed from hybrid conductors. Hybrid conductive fabrics were made by knitting copper, silver, and stainless steel conductors together with cotton yarn. The basic theory of EMSE is introduced, and the waveguide measurement setup described. The through-reflect-line calibration setup was used to obtain accurate results. After calibration of the established waveguide measurement setup, hybrid conductive fabrics were tested. The measurements were analyzed and the fabrics compared. The aim is to produce a hybrid fabric that is suitable for general use, has a good EMSE, is easy to produce, and offers low-cost high-frequency solutions. An easy-to-produce and low-cost EMSE material is required, especially in new-generation wearable flexible electronic devices and military applications.

Asymmetric sandwich poly(lactic acid) composite films fabricated by one-step phase separation approach towards absorption-dominant electromagnetic interference shielding and hydrophobicity

The absorption-dominant electromagnetic interference (EMI) shielding polymer composites with excellent hydrophobicity and environmental friendliness are highly demanded to alleviate secondary electromagnetic radiation in high-humidity surroundings. Herein, cobalt–nickel@carbon nanotubes-polylactic acid-silver nanowires (CoNi@CNTs-PLA-AgNWs) films with asymmetrical sandwich architectures were successfully fabricated via a one-step magnetic field-assisted non-solvent-induced phase separation methodology. AgNWs are mainly spread on the rough top layer, but CoNi@CNTs are primarily distributed in the porous bottom layer of CoNi@CNTs-PLA-AgNWs composite films. Owing to the unique asymmetrical magnetic-electric dual networks, 150CoNi@CNTs-PLA-7AgNWs film displays the fantastic averaged EMI SET of 53.7 dB and optimal A of 0.61, illuminating the dominance of absorption in EMI shielding and efficiently alleviating the secondary electromagnetic pollution. In order to enhance the stability of EMI shielding in damp environment, CoNi@CNTs-PLA-AgNWs composite films are dip-coated in 1H,1H,2H,2H-perfluorodecyltrimethoxysilane (FDTS) solution for hydrophobic modification. The excellent water repellency is achieved on both top and bottom surface of CoNi@CNTs-PLA-AgNWs films with WCA > 150° and > 120°, respectively, while maintaining the superior EMI shielding performance. Such facile one-step asymmetrical sandwich structure design strategy provides valuable insight into preparing and controlling hydrophobic absorption-dominant EMI shielding composites, which is anticipated to have numerous implications for smart and portable electronic devices in high-humidity environment.

Highly Stretchable Supercapacitor‐Type Multifunctional Self‐Powered Porous Electronic Skins

AbstractThe development of highly stretchable self‐powered electronic skins with a broad detection range is urgently needed but remains a great challenge. Herein, unprecedented highly stretchable, broad‐range‐response, supercapacitor‐type, one‐body, and self‐powered electronic skins are developed by assembling porous polyurethane/polypyrrole electrode, polyacrylic acid/polyacrylamide ionic gel electrolyte, and porous polyurethane/MXene electrode. The folded porous structure of the electrodes significantly enhances the stretchability, while the modulus‐gradient multilayer structure of the device effectively broadens the pressure detection range. The electronic skins combine self‐powered dynamic/static pressure sensing, ultrabroad detection range (20 Pa–3.5 MPa), ultrahigh stretchability up to 387%, excellent compression stability (5000 cycles under 195 kPa), and good stretching stability (500 cycles under 200% tensile strain). They have the capability of monitoring human body motions, physiological signals, and high pressures from motorcycle tires, as well as tactile sensing of robotic grippers. In addition, they can be applied for highly stretchable thermal management and electromagnetic shielding devices. This work provides a new strategy for the development of highly stretchable, broad‐range‐response, and multifunctional self‐powered wearable electronics and sensors.

Biobased recyclable epoxy composites reinforced with carbon nanotubes for electromagnetic interference shielding and Joule heating

AbstractCurrent epoxy thermosets are facing various challenges such as resource scarcity, environmental concern, and limited functionalities. Here, we present a novel solvent free approach to fabricate multifunctional carbon nanotubes (CNTs) reinforced biobased and recyclable epoxy thermoset composites through precuring in an internal mixer followed by curing in an oven. The epoxy matrix, a covalent adaptable network (CAN) based on dynamic imine bonds, was synthesized from entirely biobased feedstocks, including glycerol triglycidyl ether, vanillin, and 1,10‐diaminodecane. The shear force during precuring facilitated dispersion of CNTs in CAN matrix, allowing for high CNTs loading (up to 20 wt%). The well‐dispersed CNTs not only reinforced mechanical properties of CAN but also introduced new functionalities like electrical conductivity, electromagnetic interference (EMI) shielding capacity, and Joule heating performance. The composite with 20% CNTs exhibited a tensile strength and Young's modulus of 78.1 MPa and 3.07 GPa, respectively, marking a 34.2% and 63.6% improvement over pristine CAN. It also demonstrated a high electrical conductivity of 35.3 S/m, resulting in a remarkable EMI shielding effectiveness (22.8 dB) and excellent Joule heating performance (reaching 131.7°C at 27 V input). Furthermore, these composites are thermally and chemically recyclable due to dynamic imine bonds, promoting sustainability and circular economy.

Nanocomposites of Thermosetting Polymers and Graphene Quantum Dots—Physical Attributes and Ongoing Progressions

Thermosets, before hardening, consist of independent macromolecules similar to thermoplastics, however, chemical curing of these macromolecules via heat or radiations may form irreversibly crosslinked macromolecular networks between their main chains. Graphene quantum dots are inimitable spherical nano-entities having the advantages of extremely small sizes, of 5-10 nm, very high surface area, surface/edge effects, quantum confinements and a range of physical characteristics including semiconductivity, fluorescence and magnetic properties. Similar to other nanocarbons (like graphene, fullerene or nanodiamonds), graphene quantum dots have been examined as noteworthy nanofillers to enhance the essential physical features of various macromolecular matrices, such as thermosets, thermoplastics and rubbers. Consequently, this review article was intended to systematically discuss the existing scientific state of graphene quantum dots reinforced thermosetting macromolecular matrices for the formation of high performance nanomaterials. According to the literature reports, the type, amount and molecular weight of these macromolecules seemed to affect the epoxy-quantum dots interactions and physical properties, like strength and heat stability of the resulting nanomaterials. Moreover, including graphene quantum dots in thermosetting matrices, like epoxies, hyperbranched polyesters and hyperbranched polyurethanes, has positively influenced the engineering aspects (mainly mechanical and thermal attributes) of the resulting nanocomposites owing to their interactions, compatibility and interfacial tendencies toward these matrices. Principally, epoxy/graphene quantum dots nanocomposites have been fabricated and investigated for the effects of graphene quantum nano-entities on the physical property enhancements of these irreversibly crosslinked macromolecules due to their mutual matrix-nanofiller interfaces. As per our analysis, the literature hitherto on the graphene quantum dots reinforced thermosetting matrix nanocomposites has disclosed significant property improvements of these macromolecules and their promising technological applications for high performance anticorrosion coatings, electromagnetic interference shields and biomedical fields.

Transforming industrial byproduct to eco-friendly functional material: Ground-granulated blast furnace slag reinforced paper for renewable energy storage

This study pioneered an eco-friendly approach for reutilizing Ground-granulated blast furnace slag (GGBFS) in paper production. This investigation is the first study focusing on the usage of paper production that presents both a new usage area of GGBFS and also a new sight. So, it can contribute to save the trees. Also, GGBFS gains economical value in paper production. 15–25 % integrated slag led to markedly enhanced brightness, density and smoothness accompanied by only minor mechanical strength decreases versus pure pulp. Significantly, the electrical analysis revealed a higher conductivity at higher frequency region reaching almost S value near to 1 which might be a good choice for electromagnetic shielding, thus; higher conductivity with increasing slag contents from pure paper's 10−11 S/cm up to 10−6 S/cm for 25 % addition which confirms the modified paper's usefulness as conductive slag agent. Although the higher addition of GGBFS has led to rising in relaxation time basically from 1.77e−4 to 2.95e−3 and based on Debye relaxation, the rising time in relaxation which was observed after the addition of GGBFS reveals better polarizability values 0.29–0.35 compared to control sample 0.26 by which both longer relaxation time and higher polarizability contribute to the ability of energy storage of modified papers. The conductive characteristics and improved qualities demonstrate these recyclable slag-modified papers present unique opportunities for emerging flexible, eco-friendly electronics, capacitors, electromagnetic shielding, and renewable energy storage applications. Overall, novel integration and characterization of slag waste for enhanced sustainable paper products pioneers an unexplored territory.

Hierarchically Structured Cellulose Acetate@Silk Protein Membrane with Enhanced Mechanical and Electromagnetic Interference Shielding Performances.

Compared to conventional fibers, electrospun porous nanofibers with hierarchical structures often involve additional active sites, interfaces, and internal spaces which boost the performances of functional materials. Here in this study, coaxial composite cellulose acetate@silk fibroin (CA@SF) fibrous membranes are constructed through an electrostatic spinning technique combining solvent-induced phase separation. Hierarchical core-shell structures on the fibers are achieved, which significantly increases the surface area and benefits the mechanical property, flux, as well as the electroless deposition of Ag nanoparticles. The total electromagnetic shielding efficiency of the sandwiched hierarchical CA@SF@Ag composite membrane with a thickness of only 100 μm reaches up to 100 dB, surpassing around 82% beyond nonhierarchical ones. To be noticed, when post-treated by ethanol, the membrane enables an enhanced tensile strength of up to 10 MPa with a thickness of only 50 μm. Our findings pave the way to the application of electrospun fiber membranes in the field of ultrathin electromagnetic shielding films.

Analyzing the Reinforcement of Multiwalled Carbon Nanotubes in Vulcanized Natural Rubber Nanocomposites Using the Lorenz–Park Method

In this study, multiwalled carbon nanotubes (MWCNTs) were incorporated into vulcanized natural rubber (VNR) matrixes to create nanocomposites with improved mechanical, thermal, and electrical properties. The interfacial interaction of the MWCNTs with the VNR matrix was quantitatively evaluated based on the crosslink density value calculated using the Flory–Rehner methodology. Various rheometric parameters were influenced by the addition of the MWCNTs, including minimum torque (ML), maximum torque (MH), and scorch time (tS1). The MWCNTs significantly enhanced the vulcanization of the composites based on the VNR matrix. This study highlights the impact of MWCNTs on crosslink density, improving mechanical properties and reducing swelling in the VNR matrix. We discovered that the MWCNTs and the VNR matrix interact strongly, which improved the mechanical properties of the matrix. The MWCNTs improved the hardness, tensile strength, and abrasion resistance of the VNR/MWCNT nanocomposites. Based on dynamic mechanical analysis, MWCNT incorporation improved stiffness as indicated by a change in storage modulus and glass transition temperatures. The addition of MWCNTs to the VNR/MWCNT nanocomposites significantly improved their electrical properties, reaching a percolation threshold where conductive pathways were formed, enhancing their overall conductivity. Overall, this study demonstrates the versatility and functionality of VNR/MWCNT nanocomposites for a variety of applications, including sensors, electromagnetic shielding, and antistatic blankets.

Construction site noise management

In recent years, the number of noise nuisance complaints has increased dramatically. Prominent among these are complaints about noise nuisance from construction sites. Most construction sites are the source of high, repetitive and annoying noise levels. The need for acoustic comfort, on the part of those who live or work in buildings near a construction site, requires that all strategies be implemented within the construction site to ensure that the noise generated is as low as possible. The article describes the approach followed by a recent Italian standard regarding the actions to be taken, by both the client and the contractor, to ensure that the construction site of the work commissioned by the client and realised by the contractor is as quiet as possible. The standard requires that the design of the construction site must include the use of both electrical machines and shielding of proven effectiveness for these applications. The best results can only be seen with a preventive approach. It can be achieved if the Contractor not only understands that the site where he is working requires him to take special care to reduce noise, but also if he demonstrates how he will put everything into good practice.

Electromagnetic interference shielding, mechanical, and flame retardant behaviors of Ti3C2Tx-MXene/glass fabric epoxy hybrid composites

This study investigates the manufacturability and electromagnetic shielding effectiveness (EMI-SE) of Ti3C2Tx/MXene-coated glass fabric laminated composites for aerospace applications. MXene-coated fabrics were produced using a dip-coating method. The effects of varying dipping counts (5 and 10) and different configurations of fabric arrangements on the EMI-SE of the composites in the X-band range (8.2–12.4 GHz) were investigated. Glass fabrics with 5 and 10 dips showed average surface resistances of 38.56 Ω/sq and 23.17 Ω/sq, respectively. In both the 5- and 10-dip composite sets, the total EMI-SE increased with the number of MXene-coated glass fabric layers in the composite. The 5MXC5 and 10MXC5 specimens, with conductive fabric in all layers, had average total shielding effectiveness (SET) of −18.75 dB and −23.21 dB, respectively. These values are 147.05 % and 205.80 % higher than the neat glass fiber-epoxy composite (C1). Flammability, bending, ILSS, and hardness tests were conducted on these composites. Increasing the MXene content reduced the burning rate, with 10MXC5 exhibiting a 26.31 % lower burning rate compared to C1. However, higher MXene content slightly decreased bending and ILSS values. Optical microscope examination of the fracture surfaces revealed that this decrease was due to delamination damage.

Nickel-plated cyanate Ester/melamine shape memory composites for stable electromagnetic shielding switch, infrared stealth, and flame retardancy

Military equipment must receive signals but is prone to malfunction due to electromagnetic interference. Moreover, operational temperature variations can be detected by infrared sensors, leading to potential exposure. Therefore, developing materials that integrate electromagnetic shielding switches with infrared stealth capabilities is crucial for enhancing target security. This study investigates a novel composite material that combines shape memory polymer (SMP) and conductive layers for integrated functionality. Utilizing melamine sponge as the substrate, a cyanate ester (CE)-nitrile rubber (NR) SMP coating is applied via dip-coating, allowing the sponge to self-fixate after deformation. The SMP demonstrates stable shape recovery. Subsequently, a conductive nickel layer is added through keratin modification and chemical plating, providing electromagnetic shielding effectiveness exceeding 30 dB and reducing infrared emissivity to 0.6. The composite material is capable of achieving controllable electromagnetic shielding switches of 35 dB and 15 dB. It maintains excellent electromagnetic shielding and infrared stealth capabilities even under acid rain conditions and extreme temperature variations. This innovative approach holds significant promise for applications requiring simultaneous electromagnetic and infrared protection.