RF MEMS Research Articles

Design and Development of a Low Insertion Loss RF MEMS Shunt Ohmic Switch

Design and Development of a Low Insertion Loss RF MEMS Shunt Ohmic Switch

The Seven-State RF MEMS Miniaturized Broadband Reconfigurable Step Attenuator.

This paper presents a three-channel reconfigurable step attenuator based on radio frequency (RF) microelectromechanical system (MEMS) switches, in response to the current issues of high insertion loss and low attenuation accuracy of attenuators. The coplanar waveguide (CPW), cross-shaped power dividers, RF MEMS switches, and π-type attenuation resistor networks are designed as a basic unit of the attenuator. The attenuator implemented attenuation of 0~30 dB at 5 dB intervals in the frequency range of 1~25 GHz through two basic units. The results show that the insertion loss is less than 1.41 dB, the attenuation accuracy is better than 2.48 dB, and the geometric size is 2.4 mm × 4.0 mm × 0.7 mm. The attenuator can be applied to numerous fields such as radar, satellites, aerospace, electronic communication, and so on.

Temperature Effects in Packaged RF MEMS Switches with Optimized Gold Electroplating Process.

Due to its excellent electrical performance, mechanical reliability, and thermal stability, electroplated gold is still the most commonly used material for movable beams in RF MEMS switches. This paper investigates the influence of process conditions on the quality and growth rate of gold electroplating, and the optimized process parameters for the gold electroplating process are obtained. The characterization of the optimized electroplated gold layer shows that it has small surface roughness and excellent thermal stability. With this optimized gold electroplating process, the RF MEMS switches are fabricated and hermetic packaged. In order to obtain the temperature environment adaptability of the packaged switch, the influence of working temperature is studied. The temperature effects on mechanical performance (includes pull-in voltage and lifetime) and RF performance (includes insertion loss and isolation) are revealed.

Stress Suppression Design for Radiofrequency Microelectromechanical System Switch Based on a Flexible Substrate.

A novel stress suppression design for flexible RF MEMS switches has been presented and demonstrated through theoretical and experimental research to isolate the stress caused by substrate bending. An RF MEMS switch with an S-shaped microspring structure was fabricated by the two-step etching process as a developmental step toward miniaturization and high reliability. The RF MEMS switches with an S-shaped microspring exhibited superior microwave performance and stable driving voltage under different substrate curvatures compared to the conventional non-microspring switches, demonstrating that the bending stress is successfully suppressed by the S-shaped microspring and the island structure. Furthermore, this innovative design could be easily extended to other flexible devices.

The Design, Simulation, and Parametric Optimization of an RF MEMS Variable Capacitor with an S-Shaped Beam

This study presents the design and simulation of an RF MEMS variable capacitor with a high tuning ratio and high linearity factor of capacitance–voltage response. An electrostatic torsion actuator with planar and non-planar structures is presented to obtain the high tuning ratio by avoiding the occurrence of pull-in point. In the proposed design, the capacitor plate is connected to the electrostatic actuators by using the s-shaped beam. The proposed design shows a 138% tuning ratio with the planar structure of the actuator and 167% tuning ratio by implementing the non-planar structure. A linearity factor of 99% is attained by adjusting the rates at which the capacitor plate rises as the actuation voltage increases and the rate at which the capacitance decreases as the plate rises. Parametric optimization of the design is performed by utilizing the finite element method (FEM) analysis and high-frequency structural simulator (HFSS) analysis to obtain an optimized high-tuning ratio RF MEMS varactor at low actuation voltage. S-parameters of the design are presented on HFSS, with a 50 ohm coplanar waveguide (CPW) serving as the transmission line. The proposed RF MEMS varactor can be utilized in tunable RF devices.

RF MEMS switch optimization using ANN and design of antenna with frequency reconfigurability

RF MEMS switch optimization using ANN and design of antenna with frequency reconfigurability

A mechanically coupled MEMS filter with high-Q width extensional mode resonators

This work presents a novel radio frequency (RF) narrowband Si micro-electro-mechanical systems (MEMS) filter based on capacitively transduced slotted width extensional mode (WEM) resonators. The flexibility of the plate leads to multiple modes near the target frequency. The high Q-factor resonators of around 100 000 enable narrow bandwidth filters with small size and simplified design. The 1-wavelength and 2-wavelength WEMs were first developed as a pair of coupled modes to form a passband. To reduce bandwidth, two plates are coupled with a λ-length coupling beam. The 79.69 MHz coupled plate filter (CPF) achieved a narrow bandwidth of 8.8 kHz, corresponding to a tiny 0.011%. The CPF exhibits an impressive 34.84 dB stopband rejection and 7.82 dB insertion loss with near-zero passband ripple. In summary, the RF MEMS filter presented in this work shows promising potential for application in RF transceiver front-ends.

Design of Broadband High-Frequency Multi-Throw RF-MEMS Switches.

This paper introduces a broadband triple-pole triple-throw (3P3T) RF MEMS switch with a frequency range from DC to 380 GHz. The switch achieves precise signal control and efficient modulation through its six-port design. It achieves an insertion loss of -0.66 dB across its frequency range, with isolation and return loss metrics of -32 dB and -15 dB, respectively. With its low actuation voltage of 6.8 V and rapid response time of 2.28 μs, the switch exemplifies power-efficient and prompt switching performance. The compact design is ideal for integration into space-conscious systems. This switch is pivotal for 6G research and has potential applications in satellite communications, military radar systems, and next-generation radio applications that require multi-antenna access.

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

Comprehensive Review of RF MEMS Switches in Satellite Communications.

The miniaturization and low power consumption characteristics of RF MEMS (Radio Frequency Microelectromechanical System) switches provide new possibilities for the development of microsatellites and nanosatellites, which will play an increasingly important role in future space missions. This paper provides a comprehensive review of RF MEMS switches in satellite communication, detailing their working mechanisms, performance optimization strategies, and applications in reconfigurable antennas. It explores various driving mechanisms (electrostatic, piezoelectric, electromagnetic, thermoelectric) and contact mechanisms (capacitive, ohmic), highlighting their advantages, challenges, and advancements. The paper emphasizes strategies to enhance switch reliability and RF performance, including minimizing the impact of shocks, reducing driving voltage, improving contacts, and appropriate packaging. Finally, it discusses the enormous potential of RF MEMS switches in future satellite communications, addressing their technical advantages, challenges, and the necessity for further research to optimize design and manufacturing for broader applications and increased efficiency in space missions. The research findings of this review can serve as a reference for further design and improvement of RF MEMS switches, which are expected to play a more important role in future aerospace communication systems.

Design and simulation of a novel RF MEMS switch anchored by springs three-levelly

Design and simulation of a novel RF MEMS switch anchored by springs three-levelly

Study on SR-Crossbar RF MEMS Switch Matrix Port Configuration Scheme with Optimized Consistency.

The performance consistency of an RF MEMS switch matrix is a crucial metric that directly impacts its operational lifespan. An improved crossbar-based RF MEMS switch matrix topology, SR-Crossbar, was investigated in this article. An optimized port configuration scheme was proposed for the RF MEMS switch matrix. Both the utilization probability of individual switch nodes and the path lengths in the switch matrix achieve their best consistency simultaneously under the proposed port configuration scheme. One significant advantage of this scheme lies in that it only adjusts the positions of the input and output ports, with the topology and individual switch nodes kept unchanged. This grants it a high level of generality and feasibility and also introduces an additional degree of freedom for optimizations. In this article, a universal utilization probability function of single nodes was constructed and an optimization objective function for the SR-Crossbar RF MEMS switch matrix was formulated, which provide a convenient approach to directly solving the optimized port configuration scheme for practical applications. Simulations to demonstrate the optimized dynamic and static consistencies were conducted. For an 8 × 8 SR-Crossbar switch matrix, the standard deviations of contact resistances of 128 units and losses of all 64 paths decreased from 1.00 and 0.42 to 0.51 and 0.23, respectively. These results aligned closely with theoretical calculations derived from the proposed model.

Characterizing MEMS Switch Reliability for Cryogenic Applications such as Quantum Computing

Micro Electromechanical Systems (MEMS) switches offer many advantages over conventional larger switches. One potential application we are exploring is the use of commercial radio frequency (RF) MEMS switches for quantum computing applications. However, it is well-documented that cryogenic temperatures can cause mechanical reliability issues for MEMS. Furthermore, commercial RF MEMS switches are designed for room temperature operation, thus their reliability at cryogenic temperatures is unknown. Commercial MEMS switches are also packaged inside sealed housings, which prevent the use of optical methods for characterization and inspection. We are therefore developing test methods to evaluate the reliability of commercial RF MEMS switches at cryogenic temperatures. We describe our test methods and preliminary reliability test data from room temperature down to 55 K.

A Novel Real-Time Self-Monitoring RF MEMS Power Sensor for 0.1–30 GHz Applications

A Novel Real-Time Self-Monitoring RF MEMS Power Sensor for 0.1–30 GHz Applications

Aluminium Scandium Nitride Thin Film BAW Resonators (FBAR) for 5G Applications

With the growing impact of 5G communication system, Radio-Frequency Micro-Electro-Mechanical-Systems (RF MEMS) technologies are becoming increasingly important in our daily lives. Development of filters in the 5G frequency range is being carried out tremendously. The rapid rise in smartphone usage, heightened data demands, congestion in the frequency spectrum, and advancements in technology have posed numerous challenges for the development of RF filters. The ultimate goal is to simplify the RF Front End Module used in smart phones, thereby achieving better selectivity. In this paper, a high frequency - high Q thin film bulk acoustic wave resonator of piezoelectric material Aluminium scandium nitride (AlScN)based FBAR is designed for 5G Application. Finite element analysis conducted using the COMSOL Multiphysics software assess the characteristics of the constructed FBAR. The outcomes indicate that the device resonates effectively at 5 GHz, exhibiting commendable return loss and a Q-factor of 1490. A high-resonance-frequency FBAR device offers advantages for 5G mobile technology.

Discussion and Demonstration of RF-MEMS Attenuators Design Concepts and Modules for Advanced Beamforming in the Beyond-5G and 6G Scenario-Part 1.

This paper describes different variants of broadband and simple attenuator modules for beamforming applications, based on radio frequency micro electro-mechanical systems (RF-MEMS), framed within coplanar waveguide (CPW) structures. The modules proposed in the first part of this work differ in their actuation voltage, topology, and desired attenuation level. Fabricated samples of basic 1-bit attenuation modules, characterized by a moderate footprint of 690 × 1350 µm2 and aiming at attenuation levels of -2, -3, and -5 dB in the 24.25-27.5 GHz range, are presented in their variants featuring both low actuation voltages (5-9 V) as well as higher values (~45 V), the latter ones ensuring larger mechanical restoring force (and robustness against stiction). Beyond the fabrication non-idealities that affected the described samples, the substantial agreement between simulations and measurement outcomes proved that the proposed designs could provide precise attenuation levels up to 40 GHz, ranging up to nearly -3 dB and -5 dB for the series and shunt variants, respectively. Moreover, they could be effective building blocks for future wideband and reconfigurable RF-MEMS attenuators. In fact, in the second part of this work, combinations of the discussed cells and other configurations meant for larger attenuation levels are investigated.

Tunable RF MEMS Inductors for Two-Frequency Bands

This paper presents the design and simulation of two-variable MEMS inductors for high-frequency applications. In two cases, the inductors' cores are enclosed between two tunable metal plates. The medium permeability changes in response to iron plate movement, ensuring a high-tuning range above 250%. The first inductor is designed for the 10 GHz range, and the inductance value is comprised of Lmin = 3.37 nH and increases to Lmax = 11.8 nH. Similar inductance values are obtained for the second inductor, but it is designed to work at 20 GHz. Furthermore, the maximum value of the quality factor of the second inductor is slightly higher than the first one and reaches Qmax = 17.5.

High speed universal NAND gate based on weakly coupled RF MEMS resonators

High speed universal NAND gate based on weakly coupled RF MEMS resonators

Harnessing a Vibroacoustic Mode for Enabling Smart Functions on Surface Acoustic Wave Devices ‐ Application to Icing Monitoring and Deicing

AbstractMicroacoustic wave devices are essential components in the radio frequency (RF) electronics and microelectromechanical systems (MEMS) industry with increasing impact in various sensing and actuation applications. Reliable and smart operation of acoustic wave devices at low costs will cause a crucial advancement. Herein, this study presents the enablement of temperature and mechanical sensing capabilities in a Rayleigh‐mode standing surface acoustic wave (sSAW) chip device by harnessing an acoustic shear‐thickness dominant wave (SD) using the same set of electrodes. Most importantly, this mode is excited by switching the polarity of the sSAW transducer electrodes by simple electronics, allowing for direct and inexpensive compatibility with an existing setup. The method in the emergent topic of surface de‐icing is validated by continuously monitoring temperature and liquid–solid water phase changes using the SD mode, and on‐demand Rayleigh‐wave deicing with a negligible energy cost. The flexibility for adapting the system to different scenarios, and loads and the potential for scalability opens the path to impact in lab‐on‐a‐chip, internet of things (IoT) technology, and sectors requiring autonomous acoustic wave actuators.

Vibration analysis of the radio frequency microelectromechanical system microbeam reinforced with copper nanoparticles

Vibration analysis of the radio frequency microelectromechanical system microbeam reinforced with copper nanoparticles