Quasi-optical SIS Mixers Research Articles

Submillimeter superconducting integrated receivers: Fabrication and yield

Fabrication procedure and yield analysis of superconducting integrated receivers is reported. These chip receivers, apart from the quasi-optical SIS mixers, contain internal local oscillators and associated rf and dc interfaces. Due to both complexity and design requirements of the integrated circuit, certain restrictions are applied to the standard Nb/Al/Al/sub x/O/sub y//Nb SNEAP process. To obtain accurate area for micron-size SIS junctions and thickness for multi-layer SiO/sub 2/ insulation, a few solutions and modifications were developed. The possibility of transferring this fabrication process worldwide has been proven experimentally.

Superconducting chip receivers for imaging application

Experimental details of a unique superconducting imaging array receiver are discussed. Each pixel contains an internally pumped receiver chip mounted on the back of the elliptical microwave lens. Each chip comprises a quasi-optical SIS mixer integrated with a superconducting flux-flow oscillator (FFO) both fabricated from the same Nb/AlO/sub x//Nb trilayer on a silicon substrate. Properties of the integrated lens antenna were studied using an externally pumped reference SIS mixer which showed antenna sidelobes below /spl sim/17 dB and a receiver double side band noise temperature, T/sub RX/(DSB), below 100 K within the frequency range 460-500 GHz that is close to the quantum noise. For the imaging array T/sub RX/(DSB)=150 K has been measured at 500 GHz using the internal flux-flow oscillator as a local oscillator (LO). A balanced SIS mixer was tested showing T/sub RX/(DSB)<100 K within the range of 480-510 GHz using the internal LO. A computer system was developed to control simultaneously the dc bias of the SIS mixer and the frequency and power provided by FFO. The system also performs automatic optimization of the receiver noise temperature.

Quasi-optical SIS mixers with normal metal tuning structures

We recently reported (1996) a quasi-optical SIS mixer which used Nb/Al-oxide/Nb tunnel junctions and a normal-metal (Al) tuning circuit to achieve an uncorrected receiver noise temperature of 840 K (DSB) at 1042 GHz. Here we present results on several different device designs, which together cover the 300-1200 GHz frequency range. The mixers utilize an antireflection-coated silicon hyper-hemispherical lens, a twin-slot antenna, and a two-junction tuning circuit. The broad-band frequency response was measured using Fourier transform spectrometry (FTS), and is in good agreement with model calculations. Heterodyne tests were carried out from 400 GHz up to 1040 GHz, and these measurements agree well with the FTS results and with calculations based on Tucker's theory (1985).

Characterization of low-noise quasi-optical SIS mixers for the submillimeter band

We report on the development of low-noise quasi-optical SIS mixers for the frequency range 400-850 GHz. The mixers utilize twin-slot antennas, two-junction tuning circuits, and Nb-trilayer junctions. Fourier-transform spectrometry has been used to verify that the frequency response of the devices is well predicted by computer simulations. The 400-850 GHz frequency band can be covered with four separate fixed-tuned mixers. We measure uncorrected double-sideband receiver noise temperatures around 5h/spl nu//k/sub B/ to 700 GHz, and better than 540 K at 808 GHz. These results are among the best reported to date for broadband heterodyne receivers.

Quasi-optical log-periodic antenna SIS mixers for the 100 GHz band

We designed and tested a quasi-optical SIS mixer that incorporates a substrate lens for the 100 GHz band. The mixer uses a planar self-complementary log-periodic antenna with an integrated tuning circuit. The antenna has a frequency independent impedance of around over several octaves. The tuning circuit consists of two SIS junctions connected in parallel through a superconducting stripline inductor for tuning out the junction capacitances and a impedance transformer for matching the junction resistance to the antenna impedance. The SIS junctions are and have an area of and a current density of . The IF output from the mixer is brought out in a balanced way at each edge of the antenna, and is coupled to a cooled low-noise amplifier through a balun transformer by using a hybrid coupler. A double-sideband receiver noise temperature less than 130 K was measured from 85 to 110 GHz. The best noise temperature was 90 K at 101 GHz, which is the same as for waveguide receivers.

Low-noise 1 THz niobium superconducting tunnel junction mixer with a normal metal tuning circuit

We describe a 1 THz quasioptical SIS mixer which uses a twin-slot antenna, an antireflection-coated silicon hyperhemispherical lens, Nb/Al-oxide/Nb tunnel junctions, and an aluminum normal-metal tuning circuit in a two-junction configuration. Since the mixer operates substantially above the gap frequency of niobium (ν≳2Δ/h∼700 GHz), a normal metal is used in the tuning circuit in place of niobium to reduce the Ohmic loss. The frequency response of the device was measured using a Fourier transform spectrometer and agrees reasonably well with the theoretical prediction. At 1042 GHz, the uncorrected double-sideband receiver noise temperature is 840 K when the physical temperature of the mixer is 2.5 K. This is the first SIS mixer which outperforms GaAs Schottky diode mixers by a large margin at 1 THz.

Low-noise slot antenna SIS mixers

We describe quasi-optical SIS mixers operating in the submillimeter band (500-750 GHz) which have very low noise, around 5 h/spl nu//k/sub B/ for the double-sideband receiver noise temperature. The mixers use a twin-slot antenna, Nb/Al-Oxide/Nb tunnel junctions fabricated with optical lithography, a two-junction tuning circuit, and a silicon hyperhemispherical lens with a novel antireflection coating to optimize the optical efficiency. We have flown a submillimeter receiver using these mixers on the Kuiper Airborne Observatory, and have detected a transition of H/sub 2//sup 18/O at 745 GHz. This directly confirms that SIS junctions are capable of low-noise mixing above the gap frequency. >

Broadband quasi-optical SIS mixers with large area junctions

A broadband quasi-optical superconducting tunnel junction (SIS) mixer with integrated tuning elements was designed and tested. We are able to achieve very low noise performance using commercially available niobium integrated circuit (IC) technology. The low critical current density (980 A/cm/sup 2/) and large area (12 /spl mu/m/sup 2/) of the commercial SIS's is compensated by the ability to fabricate accurate integrated tuning structures in the mature niobium IC process available from Hypres, Inc. Noise measurements were made in the frequency range from 70 to 105 GHz. The best uncorrected double sideband receiver noise is 38 K at 77 GHz, with receiver noise temperatures less than 100 K from 75 to 102 GHz.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Quasioptical SIS mixer with broadband integrated tuning elements

The authors have designed and tested a quasioptical superconducting tunnel junction (superconductor-insulator-superconductor, or SIS) mixer with integrated tuning elements. The designs consists of a self-complementary log-periodic antenna, the SIS tunnel junction, and the broadband superconducting tuning circuit. The tuning circuit is placed between the SIS junction and the center of the antenna. Tuning circuits are designed for 98 GHz and 492 GHz. Self-induced resonant steps are observed in I-V curves. Results of noise temperature measurements performed between 89 GHz and 104.4 GHz are reported. Results from the Touchstone simulation program, when run with the actual fabrication process parameters, show agreement with the experiment. Three types of measurements are presented: DC I-V curve measurement, heterodyne detection measurement, and direct detection measurement. All measurements show consistent results and they all agree with the theoretical predictions.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Josephson effect gain and noise in SIS mixers

The authors report measurements of gain and noise in SIS mixers at 230 and 492 GHz. Measurements were made of relatively high gain and noise associated with Josephson currents that have not been previously reported. These measurements show that Josephson currents are increasingly important as operating frequencies are raised. The techniques used to make these measurements are discussed. Measurements made with hot and cold black-bodies are shown to be inaccurate at high frequencies. The problem is that SIS mixers do not always respond linearly to the signal power incident on them. This is particularly important when (1) very broad band mixers are used and (2) Josephson effect currents are important. Both of these circumstances are present in the quasioptical SIS mixers favored for 500 GHz and higher. Monochromatic signals were used to measure gain and noise to get around these problems. >

Quasi-optical slot antenna SIS mixers

A quasi-optical SIS mixer designed for efficient radiation coupling is described. The mixer uses a twin-slot antenna which has the advantages of a good beam pattern and a low impedance. The radiation and impedance characteristics of the antenna were obtained from a moment-matched calculation. Tapered superconducting microstrip transmission lines are used to carry the radiation from the slot antennas to the tunnel junction. The effective impedance seen by the tunnel junction is quite low, about 4 Omega , which allows micron-size junctions to be used at 500 GHz. The mixers have been fabricated using Nb/Al-oxide/Nb tunnel junctions and a receiver noise temperature of 420 K (DSB) was measured at 490 GHz, which is the best yet obtained for a quasi-optical mixer at this frequency. The comparatively large junction area increases the mixer saturation power and allows strong suppression of noise from the Josephson effect by the application of a magnetic field of modest strength. >