Quartz Crystal Microbalance Measurements Research Articles

A combined experimental and DFT study on the zero valent iron/reduced graphene oxide doped QCM sensor for determination of trace concentrations of As using a Flow-batch system

A sensor based on a gold Quartz Crystal Microbalance (QCM) modified with nanoscale zero-valent iron nanoparticles (nZVI) anchored to reduced graphene oxide (rGO) was developed. An automated measurement microsystem was employed using QCM (modified and unmodified) as an arsine detector device. The QCM measurements of frequency changes are associated with total As concentration (III/V) in the samples. The gold surface QCM modification with nZVI/rGO improved the sensitivity in total As determination. The limit of detection (LOD) was 0.0062 ng mL−1 for QCM-Au/nZVI/rGO, 100 times higher than the unmodified QCM-Au sensor. Moreover, studies of adsorption energy and electron density of As with QCM-Au/nZVI/rGO and QCM-Au systems were performed. For this purpose, Density Functional Theory (DFT) methodology was used employing arsine adsorption on magnetite nanoparticles supported on graphene, and also on Au as models. This theoretical-experimental research allows us to acquire knowledge of the interaction of Au/nZVI/rGO with As and confirms the experimental results.

The Mg Electrode Cycling Mechanism in Simple Salt Glyme Electrolytes

The lithium-ion battery (LIB) has been at the forefront of innovations in energy storage since its commercialisation over 30 years ago. As we reach the practical specific capacity limit of current state-of-the-art materials, novel and innovative battery technologies are required to satiate the requirements of energy intensive applications such as electric vehicles. 1 The use of a lithium metal negative electrode has been proposed to increase the energy density, however the high reactivity causes poor cycling performance due to electrolyte degradation, dendrite formation and safety issues. 2 The magnesium electrode offers a solution that has double the theoretical volumetric capacity of the lithium electrode while simultaneously mitigating dendritic growth, reducing raw material costs and greatly increasing sustainability. 3,4 Previous work has shown that traditional LIB electrolytes are not compatible with magnesium metal, and the plating and stripping mechanism that underpins how magnesium electrodes cycle is poorly understood. 5 Here we explored the mechanism of magnesium plating and stripping in glyme-based electrolytes with a range of additional additives. We show that in the pure electrolyte solution, interphase formation is critical to stable cycling but that this is accompanied by significant degradation and accumulation of inactive Mg.6 We establish the three-dimensional chemical composition of Mg deposits in the different electrolyte formulations using a combination of focused ion beam-scanning electron microscopy (FIB-SEM), energy dispersive x-ray spectroscopy (EDX) and transmission electron microscopy (TEM). We use these findings to develop a mechanistic understanding that explains the electrochemical cycling performance of magnesium metal negative electrodes. In situ electrochemical quartz crystal microbalance (EQCM) measurements are used to evaluate the plating and stripping efficiency of the electrodes and to identify non-electrochemical degradation reactions between Mg and the electrolyte solutions.

Role of Ionic Liquids As Modifiers of Ru-Based Catalysts for Water Electrolysis

The generation of hydrogen through electrocatalytic water splitting has attracted tremendous attention in the past years [1,2]. Although water electrolysis has been already established in industrial settings, a large amount of research is still being carried out to further improve the catalytic efficiency and stability to exploit the full potential of this technology. One approach in this endeavor is the utilization of ionic liquids (ILs) as modifiers of electrocatalysts and electrode surfaces [3, 4]. The special physicochemical properties of the IL can affect and ideally improve the characteristics of the electrocatalyst, e.g., in terms of mass and electron transport [3]. Furthermore, the hydrophilic nature of certain ILs can in addition influence gas bubbles removal on the working electrode and improve the stability of the catalysts (e.g., Ru) by acting as a monomer-like binder [4].In this study, we compared the effect of four different ILs that are based on the same cation chain (1-butyl-3-(4-methylphenethyl)-1H-imidazol-3-ium) but different anions (-OAc, -NTf2, -Br, and -MeSO3) on Ru nanoparticles as catalysts for hydrogen and oxygen evolution reactions (HER and OER). To this end, carbon nanotubes were functionalized using different ILs and subsequently decorated with 1-2 nm Ru nanoparticles (Ru NPs) following an established organometallic approach [5]. We analyze how the catalytic activity/stability for HER, as well as OER, is influenced by the metal-ILs combination by established electrochemical methods utilizing a rotational disc electrode setup, with a particular focus on the different hydrophilic natures (depending on the anion) of the four ILs. To obtain a more comprehensive picture of how the different ILs affect Ru dissolution during the reaction, the IL/catalyst systems are additionally investigated by inductively coupled plasma-optical emission spectroscopy (ICP-OES) in a flow cell setup, as well as by electrochemical quartz crystal microbalance (EQCM) measurements.In this work, we discuss the use of ILs as modifiers for catalyst/electrode systems in water-splitting reactions, highlighting the importance of careful IL selection as well as the necessity for more future research in this field to fully explore the potential of IL/NPs-systems in electrochemistry.

Coverage Effects in Quartz Crystal Microbalance Measurements with Suspended and Adsorbed Nanoparticles.

Quartz crystal microbalance (QCM) biosensors often deal with nanoparticles suspended in the solvent at tens of nanometers above the resonator while being linked to some molecular receptor (DNA, antibody, etc.). This work presents a numerical analysis based on the immersed boundary method for the flow and QCM impedance created by an ensemble of spherical particles of radius R at varying surface coverage Θ and particle-surface gap distance Δ. The trends for the frequency Δf and dissipation ΔD shifts against Θ and Δ are shown to be determined by modifications in the structure of the perturbative flow created by the analytes. Simulations are in good agreement with a relatively large experimental database collected from the literature. Qualitative differences between the adsorbed (Δ ≈ 0) and suspended states (Δ > 0) are highlighted. In the case of adsorbed particles, deviations from the linear scaling Δf ∝ Θ are observed above Θ > 0.05 and largely depend on the specific analyte-substrate combination. Moreover, in general, ΔD(Θ) is not monotonous and usually presents a maximum around Θ ∼ 0.2. In the case of suspended analytes, the agreement with the numerical results is quantitative, indicating that the predicted scalings are universal and determined by hydrodynamics. Up to high coverage, the suspended particles present Δf ∼ Θ and ΔD ∼ Θβ, where β ≈ 0.85 is not largely dependent on R. The present findings should help forecast molecular configurations from QCM signals and have implications on QCM analyses, e.g., in the case of suspended ligands (Δf ∝ Θ), it is safe to use Δf to build Langmuir isotherms and estimate equilibrium constants. Open questions on the transition from the suspended-to-adsorbed state are discussed.

Degradation kinetics of medium chain length Polyhydroxyalkanoate degrading enzyme: a quartz crystal microbalance study.

This study investigates the enzymatic degradation processes of different classes of polyhydroxyalkanoates (PHAs), a group of biopolymers naturally synthesized by various microorganisms. Medium chain length PHAs (mcl-PHAs) are distinguished biopolymers due to their biodegradability and diverse material properties. Using quartz crystal microbalance measurements as a valuable tool for accurate real-time monitoring of the enzymatic degradation process, the research provides detailed kinetic data, describing the interaction between enzymes and substrates during the enzymatic degradation process. Thin films of poly-3-hydroxybutyrate (PHB) and polyhydroxyoctanoate copolymer (PHO), containing molar fractions of about 84% 3-hydroxyoctanoate and 16% 3-hydroxyhexanoate, were exposed to scl-depolymerases from Pseudomonas lemoignei LMG 2207 and recombinant mcl-depolymerase produced in Escherichia coli DH5α harboring the plasmid pMAD8, respectively. Analyses based on a heterogeneous kinetic model for the polymer degradation indicated a six-fold stronger adsorption equilibrium constant of mcl-depolymerase to PHO. Conversely, the degradation rate constant was approximately twice as high for scl-depolymerases acting on PHB. Finally, the study highlights the differences in enzyme-substrate interactions and degradation mechanisms between the investigated scl- and mcl-PHAs.

INFUENCE OF ADSORPTION LAYERS OF POLYELECTROLYTES ON THE WETTING AND MODIFICATION OF THE POLYSTYRENE SURFACE

The adsorption of cationic and anionic polyelectrolytes from aqueous solutions on the polystyrene surface was studied by quartz crystal microbalance and contact angle measurements. It is shown that, despite the multilayer nature of adsorption, only a monolayer of polyelectrolyte macromolecules is rmly retained on the polymer surface, and the polystyrene surface is hydrophilized. It is shown that with complete monolayer lling of the surface, the degree of modi cation of the polystyrene surface does not depend on the nature of the studied polyelectrolytes, and the modifying monolayers provide the value of the polystyrene/water interfacial energy, which indicates the potential biocompatibility of the material based on the modi ed polystyrene.

X-ray reflectivity study of the heat shock protein Hsp70 interaction with an artificial cell membrane model

Membrane-bound heat shock protein 70 (Hsp70) apart from its intracellular localization was shown to be specifically expressed on the plasma membrane surface of tumor but not normal cells. Although the association of Hsp70 with lipid membranes is well documented the exact mechanisms for chaperone membrane anchoring have not been fully elucidated. Herein, we addressed the question of how Hsp70 interacts with negatively charged phospholipids in artificial lipid compositions employing the X-ray reflectivity (XRR) studies. In a first step, the interactions between dioleoylphosphatidylcholine (DOPC) in the presence or absence of dioleoylphosphatidylserine (DOPS) and Hsp70 had been assessed using Quartz crystal microbalance measurements, suggesting that Hsp70 adsorbs to the surface of DOPC/DOPS bilayer. Atomic force microscopy (AFM) imaging demonstrated that the presence of DOPS is required for stabilization of the lipid bilayer. The interaction of Hsp70 with DOPC/DOPS lipid compositions was further quantitatively determined by high energy X-ray reflectivity. A systematic characterization of the chaperone-lipid membrane interactions by various techniques revealed that artificial membranes can be stabilized by the electrostatic interaction of anionic DOPS lipids with Hsp70.

Efficient formation of poly(ethylene glycol) polymer brushes on gold electrodes via surface-initiated electrochemically mediated ATRP (SI-eATRP)

Electrochemically mediated surface-initiated atom transfer radical polymerization (SI-eATRP) is an interesting grafting from technique used to grow, in a controlled way, polymeric films from a wide range of surfaces, including metal substrates. Aqueous SI-eATRP offers an appealing strategy for the preparation of polymers by using water-soluble monomers, employing an oxidatively stable catalyst complex. The goal of this work is to tailor compact poly-(oligo(ethylene glycol)methacrylate) (p-OEGMA) brushes on gold electrodes by combining the formation of self-assembled monolayers (SAMs) containing a suitable ATRP initiator molecule, and the SI-eATRP polymerization approach. We have investigated the effects of the SAM-initiator nature, the applied potential, and the duration of the polymerization process on the properties of the grafted p-OEGMA-brushes. In addition, we employed electrochemical quartz crystal microbalance measurements to evidence the living character of the polymerization. The final properties of the tailored p-OEGMA-brush were studied by cyclic voltammetry and electrochemical impedance spectroscopy, obtaining information on the electronic and ionic blocking behaviour of these films, under different experimental conditions. Further information on structural conformation, composition, and organization was obtained from different characterization techniques: IRRAS and XPS spectroscopies, contact angle measurements, and SEM and AFM microscopies. These techniques confirmed that an efficient formation of p-OEGMA-brushes via SI-eATRP was achieved. Thus, the designed SI-eATRP system offers an interesting option to functionalize a wide variety of substrates with water-soluble and biocompatible monomers. Such coatings present potential applications in various fields, including biomedical applications.

Facile Synthesis of Catechol-Containing Polyacrylamide Copolymers: Synergistic Effects of Amine, Amide and Catechol Residues in Mussel-Inspired Adhesives.

The straightforward synthesis of polyamide-derived statistical copolymers with catechol, amine, amide and hydroxy residues via free radical polymerization is presented. In particular, catechol, amine and amide residues are present in natural mussel foot proteins, enabling strong underwater adhesion due to synergistic effects where cationic residues displace hydration and ion layers, followed by strong short-rang hydrogen bonding between the catechol or primary amides and SiO2 surfaces. The present study is aimed at investigating whether such synergistic effects also exist for statistical copolymer systems that lack the sequence-defined positioning of functional groups in mussel foot proteins. A series of copolymers is established and the adsorption in saline solutions on SiO2 is determined by quartz crystal microbalance measurements and ellipsometry. These studies confirm a synergy between cationic amine groups with catechol units and primary amide groups via an increased adsorptivity and increased polymer layer thicknesses. Therefore, the free radical polymerization of catechol, amine and amide monomers as shown here may lead to simplified mussel-inspired adhesives that can be prepared with the readily scalable methods required for large-scale applications.

Proton is Essential or Not: A Fresh Look on Pseudocapacitive Energy Storage of PANI Composites.

Protonation has been considered essential for the pseudocapacitive energy storage of polyaniline (PANI) for years, as proton doping in PANI chains not only activates electron transport pathways, but also promotes the proceeding of redox reactions. Rarely has the ability for PANI of storing energy without protonation been investigated, and it remains uncertain whether PANI has pseudocapacitive charge storage properties in an alkaline electrolyte. Here, this work first demonstrates the pseudocapacitive energy storage for PANI without protonation using a PANI/graphene composite as a model material in an alkaline electrolyte. Using in situ Raman spectroscopy coupled with electrochemical quartz crystal microbalance (EQCM) measurements, this work determines the formation of -N= group over potential on a PANI chain and demonstrates the direct contribution of OH- in the nonprotonation type of oxidation reactions. This work finds that the PANI/graphene composite in an alkaline electrolyte has excellent cycling stability with a wider operation voltage of 1V as well as a slightly higher specific capacitance than that in an acidic electrolyte. The findings provide a new perspective on pseudocapacitive energy storage of PANI-based composites, which will influence the selection of electrolytes for PANI materials and expand their application in energy storage fields.

Analysis of HepG2 cell response to a wide concentration range of mitomycin C using a multichannel quartz crystal microbalance system with a microscope

The morphological response of HepG2 cells to mitomycin C was analyzed using a multichannel quartz crystal microbalance system equipped with a home-built movable microscope that enables the simultaneous acquisition of cell images and measurements of eight-channel quartz crystal microbalance. After 24 h of cell seeding, mitomycin C was injected into the culture medium. During the attachment process, the resonant frequency decreased, and the curves fitted well with the first-order lag response. Analysis of the response to mitomycin C revealed that the resonant frequency response curves varied with mitomycin C concentration. When the mitomycin C concentration was <10 μmol L−1, the delay time was observed before the increase in resonant frequency. When the mitomycin C concentration was extremely low, an additional decrease in resonant frequency was observed in the middle of the delay time that fitted well with the cumulative log-normal distribution curve. The resonant frequency response curves after the delay time fitted well with the cumulative log-normal distribution curves. The delay time and mean cumulative log-normal distribution time for the increase in resonant frequency correlated with the mitomycin C concentration; however, the mean time for the additional decrease in the resonant frequency did not show a statistically significant difference as a function of mitomycin C concentration. For mitomycin C concentrations of >20 μmol L−1, the response to the change in resonant frequency was rapid, and the response curves fitted well with the first-order lag response. The first-order lag response indicates that the response occurred simultaneously for all cells. The results showed that the time constant was independent of the tested mitomycin C concentration between 20 and 100 μmol L−1. These results suggested that different cell death processes occurred by mitomycin C. The findings of this study suggest that the system can be used to investigate cell death in adherent cells.

Electrically Controlled Adsorptive Membranes with Tunable Affinity for Selective Chromium (VI) Separation from Water.

Ionic contaminants such as Cr(VI) pose a challenge for water purification using membrane-based processes. However, existing membranes have low permeability and selectivity for Cr(VI). Therefore, in this study, we prepared an electrically controlled adsorptive membrane (ECAM-L) by coating a loose Cl--doped polypyrrole layer on a carbon nanotube substrate, and we evaluated the performance of ECAM-L for Cr(VI) separation from water. We also used electrochemical quartz crystal microbalance measurements and molecular dynamics and density functional theory calculations to investigate the separation mechanisms. The adsorption and desorption of Cr(VI) could be modulated by varying the electrostatic interactions between ECAM-L and Cr(VI) via potential control, enabling the cyclic use of the ECAM-L without additional additives. Consequently, the oxidized ECAM-L showed high Cr(VI) removal performance (<50 μg/L) and treatment capacity (>3500 L/m2) at a high water flux (283 L/m2/h), as well as reusability after the application of a potential. Our study demonstrates an efficient membrane design for water decontamination that can selectively separate Cr(VI) through a short electric stimulus.

Antiadhesive Copolymers at Solid/Liquid Interfaces: Complementary Characterization of Polymer Adsorption and Protein Fouling by Sum Frequency Generation Vibrational Spectroscopy and Quartz-Crystal Microbalance Measurements with Dissipation Monitoring.

Amphiphilic copolymers comprising hydrophilic segments of poly(ethylene glycol) and hydrophobic domains that are able to adhere to solid/liquid interfaces have proven to be versatile ingredients in formulated products for various types of applications. Recently, we have reported the successful synthesis of a copolymer designed for modifying the surface properties of polyesters as mimics for synthetic textiles. Using sum frequency generation (SFG) spectroscopy, it was shown that the newly developed copolymer adsorbs effectively on the targeted substrates even in the presence of surfactants as supplied by common detergents. In the present work, these studies were extended to evaluate the ability of the formed copolymer adlayers to passivate polyester surfaces against undesired deposition of bio(macro)molecules, as represented by fibrinogen as model protein foulants. In addition, SFG spectroscopy was used to elucidate the structure of fibrinogen at the interface between polyester and water. To complement the obtained data with an independent technique, analogous experiments were performed using quartz-crystal microbalance with dissipation monitoring for the detection of the relevant interfacial processes. Both methods give consistent results and deliver a holistic picture of brush copolymer adsorption on polyester surfaces and subsequent antiadhesive effects against proteins under different conditions representing the targeted application in home care products.

Growth of SrMoO3 thin films by suboxide molecular beam epitaxy

Among ABO3 perovskites, SrMoO3 possesses the lowest electrical resistivity in addition to having high optical transparency in the visible spectrum. This unusual combination of material properties allows it to be a potential replacement for indium tin oxide as a transparent electrode. Thus far, its thin film synthesis has been challenging and limited primarily to pulsed laser deposition and sputtering. Here, we report the growth of SrMoO3 thin films by suboxide molecular beam epitaxy. We demonstrate that optically transparent and conductive SrMoO3 films can be grown by supplying elemental strontium via a conventional effusion cell and thermally evaporating MoO3 pellets as a molybdenum source. The direct supply of a molecular oxygen flux to the MoO3 charge was utilized to prevent reduction to lower oxidation states of the charge to ensure congruent evaporation and, thus, a stable MoO3 molecular flux. The optimal growth conditions were found by varying the Sr to MoO3 flux ratio determined from quartz crystal microbalance measurements and monitoring the growth by reflection high-energy electron diffraction. SrMoO3 thin films with 21 nm thickness were confirmed to be optically transparent with transmission between 75 and 91% throughout the visible spectral range and electrically conducting with a room temperature resistivity of 5.0 × 10−5 Ω cm. This realization of this thin film growth method can be further expanded to the growth of other transition metal perovskites in which cations have extremely low vapor pressure and cannot be evaporated in elemental forms.

Aqueous Polyelectrolyte Electrodeposition: The Effects of Alkyl Substitution and Varying Supporting Electrolyte Concentrations on the Deposition Efficiency

AbstractThe controlled growth of surface‐modifying polymer films by electrodeposition often fails because of the lack of redox activity of these compounds. Here, electroactive complexants help to electrodeposit non‐electroactive polymers. Hence, we investigate the counterion‐induced electrodeposition of polyelectrolytes: three quaternized poly(N,N‐dialkylaminoethyl methacrylate)s (qPDAAEMA), in particular their methyl, ethyl, and isopropyl derivatives (i. e. qPDMAEMA, qPDEAEMA, and qPDPAEMA), provide transparent solutions in the presence of hexacyanoferrate(II) (ferrocyanide) at specific concentration windows of the KCl supporting electrolyte. Below a certain KCl concentration, insolubility dominates irrespective of the hexacyanoferrate valency, whilst above an upper threshold, full solubility is observed. Between these limits, oxidation reversibly electrodeposits polymer/hexacyanoferrate(III) (ferricyanide) complexes. Hydrodynamic voltammetry (and data analysis using in‐house software) provides access to the deposition efficiency (DE). qPDEAEMA with ethyl substituents shows highest DEs; larger or smaller substituents fall short because of a balance between “hydrophobicity” and charge separation, shifting the window toward smaller salt concentrations with increasing alkyl size. We always observe a DE maximum close to the minimum salt concentration, whilst electrochemical quartz crystal microbalance (EQCM) measurements indicate a change in film water content close to the maximum. These effects, being also discussed in terms of polymer conformation, can direct the future engineering of electroassisted coatings.

Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance

The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.

Feasibility study of amperometric and electrochemical quartz crystal microbalance measurements for in situ state of charge monitoring in vanadium flow batteries

For an efficient flow battery operation, knowledge of the state of charge of the battery is essential. Monitoring the state of charge of both half cells is advantageous concerning a timely detection of crossover processes. We present the first results for amperometric and electrochemical quartz crystal microbalance measurements in a vanadium flow battery test setup. By validating with half cell potential measurements as well as ex situ titration we investigate the applicability of both electrochemical methods for an in situ half cell state of charge monitoring.

Interfacial Molecular Compatibility for Programming Organic-Metal Oxide Superlattices.

Artificially programming a sequence of organic-metal oxide multilayers (superlattices) by using atomic layer deposition (ALD) is a fascinating and challenging issue in material chemistry. However, the complex chemical reactions between ALD precursors and organic layer surfaces have limited their applications for various material combinations. Here, we demonstrate the impact of interfacial molecular compatibility on the formation of organic-metal oxide superlattices using ALD. The effects of both organic and inorganic compositions on the metal oxide layer formation processes onto self-assembled monolayers (SAM) were examined by using scanning transmission electron microscopy, in situ quartz crystal microbalance measurements, and Fourier-transformed infrared spectroscopy. These series of experiments reveal that the terminal group of organic SAM molecules must satisfy two conflicting requirements, the first of which is to promptly react with ALD precursors and the second is not to bind strongly to the bottom metal oxide layers to avoid undesired SAM conformations. OH-terminated phosphate aliphatic molecules, which we have synthesized, were identified as one of the best candidates for such a purpose. Molecular compatibility between metal oxide precursors and the -OHs must be properly considered to form superlattices. In addition, it is also important to form densely packed and all-trans-like SAMs to maximize the surface density of reactive -OHs on the SAMs. Based on these design strategies for organic-metal oxide superlattices, we have successfully fabricated various superlattices composed of metal oxides (Al-, Hf-, Mg-, Sn-, Ti-, and Zr oxides) and their multilayered structures.

Thin film preparation of polyphenol oxidase enzyme (PPO) and investigation of its organic vapor interaction mechanism

This study investigated spin coated thin films of polyphenol oxidase (PPO) enzyme as vapor sensor to detect chloroform, acetone, ethyl acetate, isopropyl alcohol and toluene. Thin film of enzyme was produced onto a bio-composite (gelatine chitosan) first layer via 5000 rpm spin speed. The density and the viscosity of the enzyme were 1.2 g ml−1 and 68 mPa.s respectively. UV–visible spectroscopy and quartz crystal microbalance (QCM) measurements were carried out to analyze the reproducibility of PPO spun film. It was found that the PPO enzyme can be transferred onto a solid substrate as a solid state thin film form. The sensor films of PPO enzyme were exposed to various volatile organic compounds (VOCs) (chloroform, acetone, ethyl acetate, isopropyl alcohol and toluene) with different fixed concentrations. The sensing responses of PPO thin films versus five vapors were investigated using QCM as the time dependence frequency recording method. The PPO sensor films exhibited high sensitivity and fast responses against all VOCs. But the response rate and magnitude were changed depending on the chemical structure and the molecular size of the analyte vapor. Recorded frequency changes as monitored by QCM technique have been integrated with the Fick’s second law of diffusion to determine the diffusion coefficients of analyte vapors. The results showed that the interaction characteristics between PPO and the analytes can be considered in terms of two main processes which are surface interaction and diffusion. And it was concluded that the formation of these two processes during the interaction depend on the molecular size and functional group of the analytes. These results showed that enzymes can be integrated into vapor sensor system as active layer and are promising for further sensor studies.

A Quartz Crystal Microbalance (QCM) Study on the Formation of Aqueous κ-Carrageenan-Chitosan Composite Bilayers with NaCl and Graphene Oxide

Biomaterials and thin biofilms play a fundamental role in the medical, food and pharmaceutical industries. The Quartz crystal microbalance (QCM) measurement technique is one of the attractive techniques which have been used for monitoring the thin-film formation process. In the current work described here, κ-carrageenan and chitosan solutions were used for the layer-by-layer (LBL) deposition of polyelectrolyte multilayers (PEMs) on the gold surface of a 5 MHz AT-cut (thickness-shear mode) quartz crystal in a flow module. A sensitive QCM system was designed to detect 0.1 Hz differences in the resonance frequency (Δf) and 10−7 changes in the energy dissipation (ΔD) values, which are the measures of the deposited mass and the film rigidity, respectively. Negatively charged carrageenan and positively charged chitosan biomolecules in the solutions were used to build up sequential and very thin bilayers on the modified gold surface. The effects of NaCl and graphene oxide (GO) addition on the mass of the deposited films were also investigated. Intermolecular interactions between the biopolymer chains, Na+ cations and GO sheets were explained by interactions between molecules, such as electrostatic forces and hydrogen bondings.