Quantum Light Sources Research Articles

QUICK3$^3$ ‐ Design of a Satellite‐Based Quantum Light Source for Quantum Communication and Extended Physical Theory Tests in Space

AbstractModern quantum technologies have matured such that they can now be used in space applications, e.g., long‐distance quantum communication. Here, the design of a compact true single photon source is presented that can enhance the secure data rates in satellite‐based quantum key distribution scenarios compared to conventional laser‐based light sources. The quantum light source is a fluorescent color center in hexagonal boron nitride. The emitter is off‐resonantly excited by a diode laser and directly coupled to an integrated photonic processor that routes the photons to different experiments performed directly on‐chip: i) the characterization of the single photon source and ii) testing a fundamental postulate of quantum mechanics, namely the relation of the probability density and the wave function (known as Born's rule). The described payload is currently being integrated into a 3U CubeSat and scheduled to launch in 2024 into low Earth orbit. Therefore the feasibility of true single photon sources and reconfigurable photonic circuits in space can be evaluated. This provides a promising route toward a high‐speed quantum network.

Enhanced Photocurrent and Electrically Pumped Quantum Dot Emission from Single Plasmonic Nanoantennas.

Integrating cavity-enhanced colloidal quantum dots (QDs) into photonic chip devices would be transformative for advancing room-temperature optoelectronic and quantum photonic technologies. However, issues with efficiency, stability, and cost remain formidable challenges to reach the single antenna limit. Here, we present a bottom-up approach that delivers single QD-plasmonic nanoantennas with electrical addressability. These QD nanojunctions exhibit robust photoresponse characteristics, with plasmonically enhanced photocurrent spectra matching the QD solution absorption. We demonstrate electroluminescence from individual plasmonic nanoantennas, extending the device lifetime beyond 40 min by utilizing a 3 nm electron-blocking polymer layer. In addition, we reveal a giant voltage-dependent redshift of up to 62 meV due to the quantum-confined Stark effect and determine the exciton polarizability of the CdSe QD monolayer to be 4 × 10-5 meV/(kV/cm)2. These developments provide a foundation for accessing scalable quantum light sources and high-speed, tunable optoelectronic systems operating under ambient conditions.

Sculpting ultrastrong light-matter coupling through spatial matter structuring.

The central theme of cavity quantum electrodynamics is the coupling of a single optical mode with a single matter excitation, leading to a doublet of cavity polaritons which govern the optical properties of the coupled structure. Especially in the ultrastrong coupling regime, where the ratio of the vacuum Rabi frequency and the quasi-resonant carrier frequency of light, ΩR/ω c, approaches unity, the polariton doublet bridges a large spectral bandwidth 2ΩR, and further interactions with off-resonant light and matter modes may occur. The resulting multi-mode coupling has recently attracted attention owing to the additional degrees of freedom for designing light-matter coupled resonances, despite added complexity. Here, we experimentally implement a novel strategy to sculpt ultrastrong multi-mode coupling by tailoring the spatial overlap of multiple modes of planar metallic THz resonators and the cyclotron resonances of Landau-quantized two-dimensional electrons, on subwavelength scales. We show that similarly to the selection rules of classical optics, this allows us to suppress or enhance certain coupling pathways and to control the number of light-matter coupled modes, their octave-spanning frequency spectra, and their response to magnetic tuning. This offers novel pathways for controlling dissipation, tailoring quantum light sources, nonlinearities, correlations as well as entanglement in quantum information processing.

Engineering the spectra of photon triplets generated from micro/nanofiber

Quantum light sources are the core resources for photonics-based quantum information processing. We investigate the spectral engineering of photon triplets generated by third-order spontaneous parametric down-conversion in micro/nanofiber. The phase mismatching at one–third pump frequency gives rise to non-degenerate photon triplets, the joint spectral intensity of which has an elliptical locus with a fixed eccentricity of 6/3 . Therefore, we propose a frequency-division scheme to separate non-degenerate photon triplets into three channels with high heralding efficiency for the first time. Choosing an appropriate pump wavelength can compensate for the fabrication errors of micro/nanofiber and also generate narrowband, non-degenerate photon triplet sources with a high signal-to-noise ratio. Furthermore, the long-period micro/nanofiber grating introduces a new controllable degree of freedom to tailor phase matching, resulting from the periodic oscillation of dispersion. In this scheme, the wavelength of photon triplets can be flexibly tuned using quasi-phase matching. We study the generation of photon triplets from this novel perspective of spectrum engineering, and we believe that this work will accelerate the practical implementation of photon triplets in quantum information processing.

Research progress of integrated quantum light sources with orbital angular momentum

Quantum light sources are one of key devices for quantum information processing, and they are also the important foundation for applications such as in quantum computing, quantum communication, and quantum simulation. Improving the capacity of quantum information coding by using the quantum light source is a major challenge in the development of quantum information technology. Photons with a helical phase front can carry a discrete, unlimited but quantized amount of orbital angular momentum (OAM). The infinite number of states with different OAMs can greatly increase the capacity of optical communication and information processing in quantum regimes. To date photons carrying OAM have mainly been generated by using bulk crystals, which limits the efficiency and the scalability of the source. With the advancement of quantum photonic technology, many significant quantum photonic devices can now be realized on integrated chips. However, creating high-dimensional OAM quantum states at a micro-nano scale is still a challenge. And the research of harnessing high-dimensional OAM mode by using integrated quantum photonic technologies is still in its infancy. Here, the authors review the recent progress and discuss the integrated quantum light sources with OAM. The authors introduce the research progress of using OAM for both single photons and entangled photons and emphasize the exciting work on pushing boundaries in high-dimensional quantum states. This may pave the way for the research and practical applications of high-dimensional quantum light sources.

Progress on Chip-Based Spontaneous Four-Wave Mixing Quantum Light Sources

Quantum light generated through spontaneous four-wave mixing (SFWM) process in nonlinear materials, such as entangled photon pairs and single photons, is an important resource for various emerging quantum applications. Integrated quantum photonics has enabled the generation, manipulation, and detection of quantum states of light with steadily increasing scale and complexity levels. Importantly, the exploration of on-chip integration has accumulated substantial progresses in recent years toward the realization of low-cost, large-scale quantum photonic circuits. Here, we review the underlying mechanism and discuss state-of-the-art SFWM on-chip quantum light sources fabricated with various structures and materials on chip. Furthermore, we enumerate the most appealing applications of on-chip SFWM such as heralding single-photon source, entangled photon source, and system-level integration.

Anapole assisted self-hybridized exciton-polaritons in perovskite metasurfaces.

The exciton-polaritons in a lead halide perovskite not only have great significance for macroscopic quantum effects but also possess vital potential for applications in ultralow-threshold polariton lasers, integrated photonics, slow-light devices, and quantum light sources. In this study, we have successfully demonstrated strong coupling with huge Rabi splitting of 553 meV between perovskite excitons and anapole modes in the perovskite metasurface at room temperature. This outcome is achieved by introducing anapole modes to suppress radiative losses, thereby confining light to the perovskite metasurface and subsequently hybridizing it with excitons in the same material. Our results indicate the formation of self-hybridized exciton-polaritons within the perovskite metasurface, which may pave the way towards achieving high coupling strengths that could potentially bring exciting phenomena to fruition, such as Bose-Einstein condensation as well as enabling applications such as efficient light-emitting diodes and lasers.

Quantum engineering of the radiative properties of a nanoscale mesoscopic system.

Despite the recent advances in quantum technology, the problem of controlling the light emission properties of quantum emitters used in numerous applications remains: a large spectral width, low intensity, blinking, photodegradation, biocompatibility, etc. In this work, we present the theoretical and experimental investigation of quantum light sources - mesoscopic systems consisting of fluorescent molecules in a thin polydopamine layer coupled with metallic or dielectric nanoparticles. Polydopamines possess many attractive adhesive and optical properties that promise their use as host media for dye molecules. However, numerous attempts to incorporate fluorescent molecules into polydopamines have failed, as polydopamine has been shown to be a very efficient fluorescence quencher through Förster resonance energy transfer and/or photoinduced electron transfer. Using the system as an example, we demonstrate new insights into the interactions between molecules and electromagnetic fields by carefully shaping its energy levels through strong matter-wave coupling of molecules to metallic nanoparticles. We show that the strong coupling effectively suppresses the quenching of fluorescent molecules in polydopamine, opening new possibilities for imaging.

Generation of entangled photon pairs from a silicon bichromatic photonic crystal cavity

Integrated quantum photonics leverages the on-chip generation of nonclassical states of light to realize key functionalities of quantum devices. Typically, the generation of such nonclassical states relies on whispering gallery mode resonators, such as integrated optical micro-rings, which enhance the efficiency of the underlying spontaneous nonlinear processes. While these kinds of resonators excel in maximizing either the temporal confinement or the spatial overlap between different resonant modes, they are usually associated with large mode volumes, imposing an intrinsic limitation on the efficiency and footprint of the device. Here, we engineer a source of time-energy entangled photon pairs based on a silicon photonic crystal cavity, implemented in a fully CMOS-compatible platform. In this device, resonantly enhanced spontaneous four-wave mixing converts pump photon pairs into signal/idler photon pairs under the energy-conserving condition in the telecommunication C-band. The design of the resonator is based on an effective bichromatic confinement potential, allowing it to achieve up to nine close-to-equally spaced modes in frequency, while preserving small mode volumes, and the whole chip, including grating couplers and access waveguides, is fabricated in a single run on a silicon-on-insulator platform. Besides demonstrating efficient photon pair generation, we also implement a Franson-type interference experiment, demonstrating entanglement between signal and idler photons with a Bell inequality violation exceeding five standard deviations. The high generation efficiency combined with the small device footprint in a CMOS-compatible integrated structure opens a pathway toward the implementation of compact quantum light sources in all-silicon photonic platforms.

Multiwavelength Quantum Correlated Photon Pair Generation for Quantum Entanglement Key Distribution

With the rapid advancement of quantum information technology, fully connected multi-user quantum entanglement distribution networks have garnered increasing attention. Among these, multi-wavelength quantum light sources are key devices for establishing connections between multiple users. Despite recent impressive advances, it remains challenging to increase the wavelength number of photon pairs due to limitations in the design and fabrication of nonlinear optical devices. This work explores the potential of silicon nitride (Si<sub>3</sub>N<sub>4</sub>) microring resonators (MRRs) as scalable platforms for multi-wavelength quantum light sources.<br>In this work, we conduct a comprehensive analysis of the key design parameters of the Si<sub>3</sub>N<sub>4</sub> MRRs, including waveguide dimension, resonator dispersion, and coupling condition, to optimize photon-pair generation. Based on these parameters, a Si<sub>3</sub>N<sub>4</sub> MRR with a free spectral range of 20 GHz and an average quality factor of 1.6 million is designed and fabricated. This small free spectral range enables the generation of more channels of correlated photon pairs using the same wavelength resources. The high-quality of the resonator facilitates the high photon pair generation rate, which are critical for quantum entanglement distribution. With a continuous-wave pump laser, correlated photon pairs across a wide spectral range are generated through the spontaneous four-wave mixing (SFWM). The coincidence-to-accidental ratio (CAR) measurements verify the strong quantum correlation between photon pairs, highlighting the reliability of the system for entanglement distribution. Furthermore, the generation and output characteristics of quantum-correlated photon pairs are experimentally investigated with a tunable bandpass filter. The results demonstrate that the successful generation of 71 wavelength-correlated photon pairs within a 25.6 nm spectral range is achieved as shown in the Figure A. Our results pave the way for the development of multi-wavelength quantum light sources with Si<sub>3</sub>N<sub>4</sub> platform, thereby advancing the multi-user quantum networks.

Research Progress of Deterministic Quantum Light Source Based on Hexagonal Boron Nitride

Research Progress of Deterministic Quantum Light Source Based on Hexagonal Boron Nitride

Beamlike Quantum Light Source Based on Lithium Niobate Crystal at 3.2 μm Wavelength Band (Invited)

Beamlike Quantum Light Source Based on Lithium Niobate Crystal at 3.2 μm Wavelength Band (Invited)

Quantum to Classical Cavity Chemistry Electrodynamics.

Polaritonic chemistry has ushered in new avenues for controlling molecular dynamics. However, two key questions remain: (i) Can classical light sources elicit the same effects as certain quantum light sources on molecular systems? (ii) Can semiclassical treatments of light-matter interactions capture nontrivial quantum effects observed in molecular dynamics? This work presents a quantum-classical approach addressing issues of realizing cavity chemistry effects without actual cavities. It also highlights the limitations of the standard semiclassical light-matter interaction. It is demonstrated that classical light sources can mimic quantum effects up to the second order of light-matter interaction provided that the mean-field contribution, the symmetrized two-time correlation function, and the linear response function are the same in both situations. Numerical simulations show that the quantum-classical method aligns more closely with exact quantum molecular-only dynamics for quantum light states such as Fock states, superpositions of Fock states, and vacuum squeezed states than does the conventional semiclassical approach.

‘Sawfish’ Photonic Crystal Cavity for Near‐Unity Emitter‐to‐Fiber Interfacing in Quantum Network Applications

AbstractPhoton loss is one of the key challenges to overcome in complex photonic quantum applications. Photon collection efficiencies directly impact the amount of resources required for measurement‐based quantum computation and communication networks. Promising resources include solid‐state quantum light sources. However, efficiently coupling light from a single quantum emitter to a guided mode remains demanding. In this work, photon losses are eliminated by maximizing coupling efficiencies in an emitter‐to‐fiber interface. A waveguide‐integrated ‘Sawfish’ photonic crystal cavity is developed and finite element (FEM) simulations are employed to demonstrate that such an emitter‐to‐fiber interface transfers, with 97.4 % efficiency, the zero‐phonon line (ZPL) emission of a negatively‐charged tin vacancy center in diamond (SnV−) adiabatically to a single‐mode fiber. A surrogate model trained by machine learning provides quantitative estimates of sensitivities to fabrication tolerances. The corrugation‐based Sawfish design proves robust under state‐of‐the‐art nanofabrication parameters, maintaining an emitter‐to‐fiber coupling efficiency of 88.6 %. Applying the Sawfish cavity to a recent one‐way quantum repeater protocol substantiates its potential in reducing resource requirements in quantum communication.

Frequency-bin photonic quantum information

Discrete frequency modes, or bins, present a blend of opportunities and challenges for photonic quantum information processing. Frequency-bin-encoded photons are readily generated by integrated quantum light sources, naturally high-dimensional, stable in optical fiber, and massively parallelizable in a single spatial mode. Yet quantum operations on frequency-bin states require coherent and controllable multifrequency interference, making them significantly more challenging to manipulate than more traditional spatial degrees of freedom. In this mini-review, we describe recent developments that have transformed these challenges and propelled frequency bins forward. Focusing on sources, manipulation schemes, and detection approaches, we introduce the basics of frequency-bin encoding, summarize the state of the art, and speculate on the field’s next phases. Given the combined progress in integrated photonics, high-fidelity quantum gates, and proof-of-principle demonstrations, frequency-bin quantum information is poised to emerge from the lab and leave its mark on practical quantum information processing—particularly in networking where frequency bins offer unique tools for multiplexing, interconnects, and high-dimensional communications.

Optical activation of praseodymium ions implanted in gallium nitride after ultra-high pressure annealing

Lanthanide (Ln)-implanted gallium nitride (GaN) semiconductors have a variety of potential applications as light-emitting devices and quantum light sources, but their optical properties are not well understood. In this study, we investigate the room temperature optical properties of praseodymium (Pr) ion implanted single-crystal GaN and their changes upon ultrahigh pressure annealing (UHPA) up to 1480 °C. Photoluminescence (PL) spectra, luminescence transition lifetime, and excitation cross section of the implanted Pr ions are analyzed. In addition, the recovery of implantation-induced damage and the thermal diffusion of implanted Pr ions by UHPA are investigated by X-ray diffraction, Raman spectroscopy, and secondary ion mass spectrometry. The results show that the implantation damage is recovered by annealing at temperatures above 1200 °C, but Pr ions thermally diffuse to the surface as the annealing temperature increases. The annealing temperature at which a maximum PL intensity is obtained increases with increasing the implantation dose. However, the PL intensity decreases in all cases after annealing at 1480 °C, indicating that a quenching factor is dominant in this temperature range.

Telecom-band quantum dot technologies for long-distance quantum networks.

A future quantum internet is expected to generate, distribute, store and process quantum bits (qubits) over the world by linking different quantum nodes via quantum states of light. To facilitate long-haul operations, quantum repeaters must operate at telecom wavelengths to take advantage of both the low-loss optical fibre network and the established technologies of modern optical communications. Semiconductor quantum dots have thus far shown exceptional performance as key elements for quantum repeaters, such as quantum light sources and spin-photon interfaces, but only in the near-infrared regime. Therefore, the development of high-performance telecom-band quantum dot devices is highly desirable for a future solid-state quantum internet based on fibre networks. In this Review, we present the physics and technological developments towards epitaxial quantum dot devices emitting in the telecom O- and C-bands for quantum networks, considering both advanced epitaxial growth for direct telecom emission and quantum frequency conversion for telecom-band down-conversion of near-infrared quantum dot devices. We also discuss the challenges and opportunities for future realization of telecom quantum dot devices with improved performance and expanded functionality through hybrid integration.

High‐Performance Telecom‐Wavelength Biphoton Source from a Hot Atomic Vapor Cell

AbstractTelecom‐band quantum light sources are critical to the development of long‐distance quantum communication technologies. A high‐performance telecom‐wavelength biphoton source from a hot 87Rb atomic vapor cell is reported. Time‐correlated biphotons are generated from the cascade‐type 5S1/2–5P3/2–4D5/2 transition of 87Rb via a spontaneous four‐wave mixing process. The maximum value of biphoton cross‐correlation to be 44(3) is achieved, under the condition of a high optical depth of 112(3), including two‐photon absorption, with a spectral width of approximately 300 MHz. The coincidence count rate of biphoton is estimated to be of the order of 38 000 cps mW−1. It is believed that the telecom‐wavelength biphoton source from an atomic vapor cell can be applied in long‐distance quantum networks and practical quantum repeaters based on atom–photon interactions.

Advances in nonlinear metasurfaces for imaging, quantum, and sensing applications

Abstract Metasurfaces, composed of artificial meta-atoms of subwavelength size, can support strong light–matter interaction based on multipolar resonances and plasmonics, hence offering the great capability of empowering nonlinear generation. Recently, owing to their ability to manipulate the amplitude and phase of the nonlinear emission in the subwavelength scale, metasurfaces have been recognized as ultra-compact, flat optical components for a vast range of applications, including nonlinear imaging, quantum light sources, and ultrasensitive sensing. This review focuses on the recent progress on nonlinear metasurfaces for those applications. The principles and advances of metasurfaces-based techniques for image generation, including image encoding, holography, and metalens, are investigated and presented. Additionally, the overview and development of spontaneous photon pair generation from metasurfaces are demonstrated and discussed, focusing on the aspects of photon pair generation rate and entanglement of photon pairs. The recent blossoming of the nonlinear metasurfaces field has triggered growing interest to explore its ability to efficiently up-convert infrared images of arbitrary objects to visible images and achieve spontaneous parametric down-conversion. This recently emerged direction holds promising potential for the next-generation technology in night-vision, quantum computing, and biosensing fields.

Linear and nonlinear optical absorption of 2D monolayer NbOCl2

The in-layer crystal structure of a two-dimensional material is stable, but the interaction force between the atomic layers is much weaker. Niobium oxide dichloride (NbOCl2) not only has high second-order nonlinear coefficients unique to common monolayer two-dimensional materials but also weak electronic coupling between layers. These characteristics make NbOCl2 very suitable as a quantum light source in quantum optical systems. This article mainly studies the linear and nonlinear optical absorption of two-dimensional monolayer NbOCl2. The characterization means include a surface distance projection map and three views, total density of states, photoelectron spectrum, charge density difference, transition dipole moment density, one-photon absorption spectrum, and two-photon absorption spectrum. There is a size effect on the total density of states, photoelectronic energy spectrum, and one-photon absorption spectrum, that is, as the size increases, the total density of states is red-shift, the photoelectronic energy spectrum is blue-shift, and the absorption spectrum has a significant red-shift. The charge density difference indicates that there is charge transfer around the Nb atom of NbOCl2. The transition dipole moment density changes periodically. The study of the two-photon absorption spectrum shows that it is dominated by a one-step transition. In summary, our work provides an in-depth understanding of its optical properties and is of great significance for the miniaturization of quantum light sources.