Quality Assurance Tests Research Articles

Custom integration of a magnetic-field monitoring system into a 32-channel MRI head coil.

Customizing a Siemens 32-channel coil for use in a Philips 3T MRI system with incorporated magnetic field probes for collecting high-quality MRI and magnetic-field monitoring data concurrently. The development process of the custom coil involved several (iterative) phases. Standard temporal SNR and B1 + data were collected with the 32-channel Siemens and for reference the 32-channel/8-channel Philips head coils before and afterthe custom coil was made compatible with the 3T Philips Achieva system, and magnetic field probes were installed into it along with ancillary electronics around it. Quality assurance tests were conducted in each of the build phases to ensure that the modifications did not affect MRI or field-monitoring data negatively. To test the finished custom coil, we collected high angular resolution diffusion imaging (HARDI) datasets on a spherical silicon oil phantom both with and without concurrent field monitoring and a 32-channel Philips coil without concurrent field monitoring, where the latter two served as reference scans to assess the improved performance of the custom coil with field monitoring. Similar HARDI-MRI data were also collected in vivo with the finished custom coil together with field monitoring data. The custom coil provided excellent temporal SNR especially at the edges where cortical gray matter is expected. When using concurrent field monitoring in HARDI acquisitions, the custom coil alleviated ghosting artifacts in phantom data and provided in vivo images with 1.4-mm isotropic resolution. The custom MRI coil with integrated magnetic-field monitoring probes provided improved imaging performance.

Non-destructive compaction evaluation and comparison of different asphalt centerline longitudinal joints

Longitudinal joint quality is critical to the service life of asphalt pavements. Maintaining failed joints of asphalt pavements is a challenge for many highway agencies. Long-term performance issues of flexible pavements may result from a poorly constructed joint; the low-density joint can prematurely deteriorate an otherwise sound pavement. The longitudinal joint is built using different geometries, rolling patterns, and construction techniques, all involving risk in achieving a well-compacted joint. Conventional quality control (QC) and quality assurance (QA) testing (using cores or density gauges) provide limited coverage due to their spot-test nature. Using conventional QC/QA methods involves the risk of accepting a poorly constructed longitudinal joint at the time of construction. This study used continuous data from the non-destructive dielectric profiling system (DPS) to identify compaction ability differences between the various joint types and construction techniques. The analysis suggests avoiding constructing an unconfined joint when possible. Percent within limits (PWL) analysis shows that any joint geometry could produce minimal compaction differences between the joint and the mat. However, if an unconfined joint needs to be constructed, a portion of the unconfined joint should be cut back before paving the adjacent lane. Such a cutback technique can result in better unconfined joint compaction. Further, PWL results showed that using a smaller subsection/sublot can isolate local compaction issues; a 100 ft sublot length is preferable for PWL analysis when utilizing DPS for compaction evaluation.

Evaluation of the detector linearity response of the DR system in different x-ray bean filters

In the recent past, at Brazilian radiology services, direct digital radiography (DR) systems are replacing Computed Radiography (CR). This situation provides several significant advantages such as improving digital image quality, patient effective dose reduction, and improved speed of examinations performed. To evaluate DR systems, various organizations have published protocols with guidelines concerning quality assurance and acceptance tests for DRs. In these protocols, there are methodologies for evaluating several parameters, such as the detector linearity response (DLR). To test the DLR, different methodologies are proposed by the organizations, such as the application of different additional filters on the X-ray beams spectrum to promote the X-ray doses suitable to produce the latent image in the DR. The objective of this work was to evaluate the results of different protocol methodologies for carrying out the DLR test of a DR flat panel. An analogic radiology equipment, a primary ionization chamber, a DR system and images unprocessed were used in this study. As indicated by the protocols, the spectra of the X-rays were modified by additional filters of copper (Cu) with aluminum (Al); Al; Cu; and polymethylmethacrylate (PMMA). The spectra of the X-rays were modified to achieve the exposure range of 0.1 to 7 mR. The results showed that the DLR curves adjustment were R²>0.99, for a logarithmic equation, type y=a.ln(x)+b. For the filters of 0.5 mmCu with 1.0 mmAl; 11.5 mmAl; 1.0 mmCu; 21 mmAl the mean pixel values showed 0.9% of the coefficient of variation (COV), while for 10 cm PMMA filters, the COV increased to 2.7%. The study showed that methodologies using Al, Cu and Al with Cu filters DLR have similar responses while using PMMA, the response was slightly different.

Development and validation of 3D printed anthropomorphic head phantom with eccentric holes for medical LINAC quality assurance testing in stereotactic radiosurgery

Stereotactic Radiosurgery (SRS) for brain tumors using Medical Linear Accelerator (LINAC) demands high precision and accuracy. A specific Quality Assurance (QA) is essential for every patient undergoing SRS to protect nearby non-cancerous cells by ensuring that the X-ray beams are targeted according to tumor position. In this work, a water-filled generic anthropomorphic head phantom consisting of two removable parts with eccentric holes was developed using Additive Manufacturing (AM) process for performing QA in SRS. In the patient specific QA, the planned radiation dose using Treatment Planning System (TPS) was compared with the dose measured in the phantom. Also, the energy consistency of radiation beams was tested at 200 MU for different energy beams at the central and eccentric holes of the phantom using an ionization chamber. Experimentally examined results show that planned doses in TPS are reaching the target within a 5% deviation. The ratio of the dose delivered in the eccentric hole to the dose delivered to the central hole shows variations of less than 2% for the energy consistency test. The designed, low-cost water-filled anthropomorphic phantom is observed to improve positioning verification and accurate dosimetry of patient-specific QA in SRS treatment.

COMPRESSIVE STRENGTH PREDICTION FOR SELF-COMPACTING CONCRETE USING ARTIFICIAL NEURAL NETWORKS

This study investigates the relationship between concrete constituent materials, slump values, density, strain and compressive strength. The database was set in the laboratory by performing a quality assurance test on the constituent materials to ascertain their suitability for concrete work. For material procurement and selection, the British Standard Department of Environment DOE technique of concrete trial mix designs was used. In this study, twelve concrete mixes were utilized. Two simplified models were developed using the feedback network Artificial Neural Networks architecture (ANNs) with R version 4.0.5 and R studio version 1.2.5033. In the two models, an independent layer comprising six nodes and a dependent layer comprising two nodes were taken. Having carried out the sensitivity analysis, the capacity of the developed equation was evaluated in terms of error metrics MSE and RMSE. The grading envelope for river sand showed that the graph fell perfectly into grading envelope zone 2 while other constituent materials tested were all confirmed suitable for concrete works. The results of compressive strength were obtained from varied water-cement ratios used for the concrete trial mix design which ranges between 0.45 to 0.6. The compressive strength results showed that the results increased consistently for each design mix. It is worthy of note that the strength of the mix fell between grades 15, 20, 25 and 35 respectively for both the 7-day and 28-day strength accordingly. Conversely, the ANN models predicted both 7-day and 28-day strength close to the laboratory value. It is concluded that this research has demonstrated economic viability which would enhance overall construction planning efficiency for future researchers, consultants and contractors in the building industries.

Multi-Organizational Insights Into Radiological Safety Standards in High-Dose Rate Brachytherapy.

The review provides an extensive study of regulations and recommendations set forth by organizations worldwide in the domain of high-dose rate (HDR) brachytherapy for the prevention and mitigation of radiation hazards. The relevant reports and publications by the International Commission on Radiological Protection (ICRP), International Atomic Energy Agency (IAEA), American Association of Physicists in Medicine (AAPM), United States (US) Nuclear Regulatory Commission (NRC), and Atomic Energy Regulatory Board (AERB) were accessed, and necessary information was compiled to clarify and understand concepts, similarities, and differences in safety standards concerning to the topic. The regulations and guidance are categorized under three major components of safety, namely layout, equipment, and source. Layout category accesses structure, design, layout, and survey. The equipment category summarizes the requirements of equipment, installation, commissioning, quality assurance (QA) and performance, safety precautions and preparedness, safety procedures, and instructions. The source category includes requirements for sealed source possession and use, calibration, categorization, certification, licensing, QA tests, and security. IAEA gives inclusive guidance on radiation protection and regulatory requirements, forming the basis of reference for other organizations worldwide. AERB regulates the radiation facilities in India; therefore, most set-ups follow their safety standards and instructions.

The LHCb VELO Upgrade module construction

The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 μm thick, n-on-p silicon sensors bump-bonded to 130 nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO2 cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 μm, more than 99.5% of all pixels are fully functional, and a thermal figure of merit of 3 Kcm2W-1 was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.

Foreign experience of software testing engineers training: analysis of educational standards and programs of American universities

The article aims to explore the U.S. educational system's approach to training software testing specialists, highlighting specific features and methodologies. The study involves analyzing key standards for IT engineer training in the USA, such as the ACM/IEEE Computer Science Curricula, ABET Accreditation Criteria, ISTE Standards for Educators, and CSTA K-12 Computer Science Standards, their overall context and targeting, as well as the inclusion of both fundamental and IT-specific disciplines into their content. In the study of each standard, particular emphasis was placed on defining the place and teaching methods of theory and practice of software testing in the university curriculum guidelines. As it was revealed in the analysis, despite the extremely similar interpretation of basic concepts and practices in the context of software testing, opinions about the methodology of their teaching and the need to study as a separate discipline, differ in a set of reviewed standards. Additionally, the research examines training programs at leading American universities, including MIT, Stanford, and Carnegie Mellon University, to identify how software testing and quality assurance are reflected in their curricula, covering full-time training programs for students in computer science, software engineering and similar related fields. The analysis examined programs in both general and basic disciplines in the context of information technology, and specific to a certain technological or organizational area, such as mobile device development or IT project management. The content of the subjects, the list of modules and lectures, as well as tasks for extracurricular work, available in open sources, was also analyzed and searched for topics related to quality assurance or software testing. As revealed in the study, in most technical universities testing is not covered within a separate discipline, but is taught as a part of ones related to development practices. However, some training programs, in particular the Master's level, still have disciplines, devoted exclusively to quality control, testing management and automation

Feasibility of a Single-Fraction Stereotactic Dose of 30 Gy to Solitary Lung Lesions on Halcyon.

Purpose We sought to explore the feasibility of using the current co-planar Halcyon ring delivery system (RDS) with a novel multileaf collimator (MLC) aperture shape controller in delivering a single high dose of 30 Gy to solitary lung lesions via stereotactic body radiotherapy (SBRT). Materials and methods Thirteen non-small-cell lung cancer (NSCLC) patients previously treated with a single dose of 30 Gy to lung lesions via SBRT on the TrueBeam (6MV-FFF) using non-coplanar volumetric modulated arc therapy (VMAT) arcs were anonymized and replanned onto the Halcyon RDS (6MV-FFF) following RTOG-0915 single-fraction criteria. The Halcyon plans utilized a novel dynamic conformal arc (DCA)-based MLC-fitting approach before VMAT optimization with a user-defined aperture shape controller option. The clinical TrueBeam and Halcyon plans were compared via their protocol compliance, target conformity, gradient index, and dose to organs-at-risk (OAR). Treatment delivery efficacy and accuracy were assessed through end-to-end quality assurance (QA) tests on Halcyon and independent dose verification via in-house Monte Carlo (MC) second-check validation. Results All Halcyon lung SBRT plans met RTOG-0915 protocol's requirements for target coverage, conformity, and gradient indices, and maximum dose 2 cm away from the target (D2cm) while being statistically insignificant (p > 0.05) when compared to clinical TrueBeam plans. Additionally, Halcyon provided a similar dose to OAR except for the ribs, where Halcyon demonstrated a lower maximum dose (15.22 Gy vs 17.01 Gy, p < 0.001). However, Halcyon plans required a higher total monitor unit (8892 MU vs 7413 MU, p < 0.001), resulting in a higher beam modulation factor (2.96 MU/cGy vs 2.47 MU/cGy, p < 0.001) and an increase in beam-on time by a factor of 2.1 (11.11 min vs 5.3 min, p < 0.005). End-to-end QA measurements demonstrate that Halcyon plans were clinically acceptable with an average gamma passing rate of 99.8% for 2%/2mm criteria and independent MC 2nd checks within ±2.86%. Conclusion Our end-to-end testing and validation study demonstrates that by utilizing a DCA-based MLC aperture shape controller before VMAT optimization, Halcyon can be used for delivering a single dose of lung SBRT treatment. However, future improvements of Halcyon RDS are recommended to allow higher output rates, rotational couch corrections, and an integrated intrafraction motion management system that will further enhance Halcyon's capability for site-specific single dosage of SBRT.

Automated Test for Monthly Quality Assurance of Optical Surface Imaging Dynamic Localization Accuracy.

The American Association of Physicists in Medicine (AAPM) recently published the report of Task Group (TG) 302, which provides recommendations on acceptance, commissioning, and ongoing routine quality assurance (QA) for surface-guided radiation therapy (SGRT) systems. One of the recommended monthly QA tests is a dynamic localization accuracy test. This work aimed to develop an automated procedure for monthly SGRT dynamic localization QA. An anthropomorphic head phantom was rigidly attached to the 6-dof couch of a TrueBeam linac. TrueBeam Developer Mode was used to take an MV image of the phantom at the starting position, then automatically drive the couch through a series of translations and rotations, taking an MV image after each translation. The Identify SGRT system monitored the motion of the phantom surface from the starting position. Translations assessed on MV images were compared to translations reported in trajectory log files and Identify log files. Rotations were compared between trajectory log files and Identify log files. Three experiments were conducted. None of the translations or rotations from any experiment exceeded the tolerance values for stereotactic ablative body radiation therapy (SABR) recommended by AAPM TG-142. Maximum deviations from the expected translation values from MV imaging, trajectory log files, and Identify log files were -0.94mm, -0.11mm, and -0.78mm, respectively. Maximum deviations from the expected rotation values from trajectory log files and Identify log files were 0.01 and -0.2 degrees, respectively. The proposed method is a simple automated way to complete monthly dynamic localization QA of SGRT systems.

Artificial intelligence in medicine: mitigating risks and maximizing benefits via quality assurance, quality control, and acceptance testing.

The adoption of artificial intelligence (AI) tools in medicine poses challenges to existing clinical workflows. This commentary discusses the necessity of context-specific quality assurance (QA), emphasizing the need for robust QA measures with quality control (QC) procedures that encompass (1) acceptance testing (AT) before clinical use, (2) continuous QC monitoring, and (3) adequate user training. The discussion also covers essential components of AT and QA, illustrated with real-world examples. We also highlight what we see as the shared responsibility of manufacturers or vendors, regulators, healthcare systems, medical physicists, and clinicians to enact appropriate testing and oversight to ensure a safe and equitable transformation of medicine through AI.

External proficiency testing for histocompatibility and immunogenetics in today and future.

The Histocompatibility and Immunogenetics laboratories provide disease association and pharmacogenetic analyses as well as the tests required for transplantation immunology and transfusion medicine. They perform Human Leukocyte Antigen (HLA) genotyping in patients/recipients and potential donor candidates for solid organ and stem cell transplants using various molecular methods, and determine mismatches. In addition, they also perform HLA antibody tests to detect anti-HLA antibodies in patients and flow cross-matches to evaluate donor-recipient compatibility. Evidence-based clinical guidelines have emphasized the importance of laboratory tests in clinical practices for a long time. Understanding the principles of Quality Control and External Quality Assurance is a fundamental requirement for the effective management of Tissue Typing laboratories. When these processes are effectively implemented, errors in routine assays for transplantation are reduced and quality is improved. In this review, the importance of Quality Assurance, Quality control and proficiency testing in Histocompatibility and Immunogenetic testing, the necessity of external proficiency testing (EPT) for accreditation, and existing and potential EPT programmes will be reviewed and evaluated in the light of the literature.

Construction Methods and Lessons Learned for a Non-Proprietary Ultra-High Performance Concrete Overlay

The work presented in this paper includes the construction methods and lessons learned from the placement of a non-proprietary ultra-high performance concrete (UHPC) overlay through the rehabilitation of a concrete bridge deck located in Socorro, New Mexico, USA. The selected bridge is a multi-cell, box girder bridge with four spans and a total length of 91.4 m and a width of 16.5 m with two traffic lanes. Rehabilitation of the bridge involved removing the top surface of the existing deck (deteriorated concrete), installing a high-performance deck (HPD) leveling course, and placing a 25 mm UHPC overlay. Sensors were installed in the bridge superstructure (multi-cell box girders, HPD, and overlay) for long-term monitoring. Overlay assessment included physical testing to evaluate the condition of the overlay–substrate bond by chain dragging and direct tension pull-off testing. Conclusions and lessons learned from this investigation serve as a fundamental list of best practices and recommendations for field construction of a non-proprietary UHPC overlay. Recommendations for preparatory tasks including material selection, substrate surface preparation, placement preparation, handling of materials, and UHPC mixing are provided. The recommendations also list best practices concerning the placement of the overlay, curing procedures, and quality assurance testing. Lastly, suggestions are presented for contracts pertaining to UHPC overlay projects.

Development and Validation of Micro-Lecture Videos as Learning Support Material for Grade 7 Science Competencies

As students opted for modular distance learning during the pandemic, they were forced to self-regulated learning with little assistance from teachers. Video lectures are materials commonly designed for active learning methods in distance learning. However, studies found that the length of videos has a strong influence on students’ control over their learning. Longer videos have issues sustaining students’ focused attention to content. This study aimed to develop, validate and evaluate the quality and effectiveness of micro-lecture videos in Physics. Using the developmental research design anchored on the ADDIE model, 7 videos were developed. Videos were quality assured and administered to grade 7 students for evaluation, and feedbacking. Using a developed instrument, an LRMDS standard evaluation tool from the Department of Education, and thematic analysis, quality assurance results, test scores, and interview transcripts were gathered and analyzed statistically and thematically. Results show that despite limited engagement, video lectures are vital so students are guided to self–regulate their learning at their own pace. They also brought positive outcomes, particularly on ownership of learning where students manage and control the pace of their video view, allowing them to replay anytime. On the quality of materials, micro-lecture videos have relevant, logically arranged information, with appropriate content and language that are free of bias. They also have a well-defined purpose, are content-friendly, and can engage viewers for a better understanding of concepts. Moreover, end-users responded that the material was easy to use, can be viewed in messenger, and can be downloaded anytime since it has a smaller file size.

Evaluating the Efficacy of Machine Performance Checks as an Alternative to Winston-Lutz Quality Assurance Testing in the TrueBeam Linear Accelerator with HyperArc.

HyperArc is a preferred technique for treating brain metastases, employing a single isocenter for multiple lesions. Geometrical isocentricity in the TrueBeam linear accelerator with HyperArc is crucial. We evaluated machine performance checks (MPCs) as an alternative to the Winston-Lutz (WL) test to verify the treatment isocenter. Between January and July 2023, we assessed 53 data points using MPC and Winston-Lutz tests. The isocenter size obtained from the MPC and its sum, including the rotation-induced couch shift, were compared with the maximum total delta value from the Winston-Lutz test. The maximum total delta was 0.68 ± 0.10 mm, while the isocenter size was 0.28 ± 0.02 mm. The sum of the isocenter size and rotation-induced couch shift measured by MPC was 0.61 ± 0.03 mm. During the Winston-Lutz test (without couch rotation), the maximum total delta value was 0.56 ± 0.13 mm. A t-test analysis revealed a significant difference in the isocenter size averages between the Winston-Lutz and MPC outcomes, whereas the Pearson's correlation coefficient yielded no correlation. Our study highlights the necessity for separate MPC and Winston-Lutz tests for isocenter verification. Therefore, the Winston-Lutz test should precede stereotactic radiosurgery for isocenter verification.

Intraoperative radiation therapy with 50kV x-rays: A multi-institutional review.

This report covers clinical implementation of a low kV intraoperative radiation therapy (IORT) program with the INTRABEAM® System (Carl Zeiss Meditec AG, Jena, Germany). Based on collective user experience from eight institutions, we discuss best methods of INTRABEAM quality assurance (QA) tests, commissioning measurements, clinical workflow, treatment planning, and potential avenues for research. The guide provides pertinent background information and clinical justification for IORT. It describes the INTRABEAM system and commissioning measurements along with a TG100 risk management analysis to ensure safety and accuracy of the IORT program. Following safety checks, dosimetry measurements are performed for verification of field flatness and symmetry, x-ray output, and depth dose. Also discussed are dose linearity checks, beam isotropy, ion chamber measurements, calibration protocols, and in-vivo dosimetry with optically stimulated luminescence dosimeters OSLDs, and radiochromic film. Emphasis is placed on the importance of routine QA procedures (daily, monthly, and annual) performed at regular intervals for a successful IORT program. For safe and accurate dose delivery, tests of important components of IORT clinical workflow are emphasized, such as, dose prescription, pre-treatment QA, treatment setup, safety checks, radiation surveys, and independent checks of delivered dose. Challenges associated with in-vivo dose measurements are discussed, along with special treatment procedures and shielding requirements. The importance of treatment planning in IORT is reviewed with reference to a Monte Carlo-based commercial treatment planning system highlighting its main features and limitations. The report concludes with suggested topics for research including CT-based image-guided treatment planning and improved prescription dose accuracy. We hope that this multi-institutional report will serve as a guidance document on the clinical implementation and use of INTRABEAM IORT.

Standardized and quality-assured predictive PD-L1 testing in the upper gastrointestinal tract. German version

As aresult of the high approval dynamics and the growing number of immuno-oncological therapy concepts, the complexity of therapy decisions and control in the area of carcinomas of the esophagus, gastroesophageal junction and stomach is constantly increasing. Since the treatment indication for PD‑1 inhibitors that are currently approved in the European Union is often linked to the expression of PD-L1 (programmed cell death-ligand1), the evaluation of tissue-based predictive markers by the pathologist is of crucial importance for treatment stratification. Even though the immunohistochemical analysis of the PD-L1 expression status is one of the best studied, therapy-relevant biomarkers for an immuno-oncological treatment, due to the high heterogeneity of carcinomas of the upper gastrointestinal tract, there are challenges in daily clinical diagnostic work with regard to implementation, standardization and interpretation of testing. An interdisciplinary group of experts from Germany has taken aposition on relevant questions from daily pathological and clinical practice, which concern the starting material, quality-assured testing and the interpretation of pathological findings, and has developed recommendations for structured reporting.

Evaluating the performance of automated external contouring tool on dose calculation of treatment planning system

Abstract Introduction The main goal of radiation therapy is to eradicate all cancer cells and minimize the damage to healthy tissues around the tumour. Treatment planning systems are used to predict the outcome of the treatment in terms of dose distribution prior to the treatment. One of the most reliable dose calculation algorithms is Monte Carlo. The aim of this study is to evaluate the performance of automated external contouring tool on dose calculation using Monte Carlo algorithm. Materials and methods The external contour of thorax phantom was created by automated tools of Monaco treatment planning system, and then, the IAEA-TECDOC-1583 quality assurance tests were created. Then, the treatment plans were delivered to the phantom, and the dose was measured by the Farmer ionization chamber at specific points. The external contour was corrected according to the source surface distances (SSD) which are mentioned in TECDOC-1583, and the dose was re-calculated. Finally, a comparison was made between the results. Results Dosimetric tests of TECDOC-1583 showed the errors ranged from −2·8% to +2·5%. In case of editing external contour and omitting fluctuations, the errors were decreased. The comparisons indicated that the most significant variation occurred in test 4 and the least changes were related to the tests 1 and 3. Conclusions The results of the study showed that the fluctuations of the external contour affect the calculated volume of the phantom and thus the dose. In order to obtain correct results, automated external contouring tools should be used with the correct instructions and re-checked before treatment planning.

Midwifery educators' perceptions of common achievement tests for students' quality assurance

Midwifery educators' perceptions of common achievement tests for students' quality assurance

Calibration assessment of the PSI proton therapy Gantry 2 scanning system after 10 years of operation

Sub-millimetre precision is a crucial criterion for beam delivery in Pencil Beam Scanning (PBS) proton therapy. Nowadays, most of the therapy systems use PBS technique where single beams with a regulated number of protons are delivered sequentially to different locations within the target. Beam energy defines the depth of the beam in the target and scanner magnets deflect the beam to the desired lateral position.The PSI Gantry 2 was among the first gantries to use the PBS technique. Available clinical proton beam energies ranging from 70 MeV to 230 MeV are achieved by de-grading a 250 MeV beam, initially provided by a super-conducting cyclotron. Beam scanning is performed just before the last bending magnet producing a nearly parallel beam at iso-centre with a well-focused beam over the full scan area of 20×12 cm2. We developed a calibration algorithm for the scanner magnets in order to achieve the desirable precision of the beam in the target. Measuring the beam position with a strip ion chamber in the gantry nozzle, we parametrized the propagation of the beam to the target calculating the beam angle at different scan positions as well as all gantry angles. During 10 years of operation we performed regular Quality Assurance (QA) tests to validate parameters obtained during the system commissioning. The QA data proved a stable system operation and no parametrization update was required so far. In this contribution, we describe the calibration pro-cess of scanning magnets with respect to beam position at the isocentre and show the stability of this implementation over the time.