Pyridine Units Research Articles

A pyridine-capped quaterthiophene as an alternative to PEDOT:PSS, processable from organic solvents and without acidity, for more stable electronic devices.

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a material that has become ubiquitous in the field of organic electronics. It is most commonly used as a hole transport layer (HTL) in optoelectronic devices and can be purchased commercially in various formulations with different properties. Whilst it is a most convenient material to work with, there are stability issues associated with PEDOT:PSS that are detrimental to device stability and these are due to the acidic nature of the PSS component. In this paper, we present a molecular, non-acidic alternative to PEDOT:PSS. The parent structure is composed of a quater(3,4-ethylenedioxythiophene) unit capped either side of the short chain with two pyridine units. This compound, termed (BEDOTPy)2, can be prepared chemically and electrochemically to give doped materials with a choice of counteranions. Further functionalisation via quaternisation at the nitrogen atoms allows for modification of solubility and film-forming properties. The conductivity of the doped samples can reach up to 3.75 S cm-1. The materials are non-acidic and are therefore attractive alternatives to PEDOT:PSS for device applications. We demonstrate an OLED device using the compound (BEDOTPy-EtOH-I)2PF6 as an HTL, and compare the device performance to one made with PEDOT:PSS. Due to the non-acidic nature of the molecular material, the corresponding OLED device does not show a drop in luminance over time, whereas a loss of performance is observed for the device containing PEDOT:PSS over a short period. These results are presented to introduce the parent compound (BEDOTPy)2 as an attractive alternative to PEDOT:PSS, which can be easily modified chemically to provide a plethora of potential compounds with tunable properties.

One-step synthesis of a pH switched pyrene-based fluorescent probe for ratiometric detection of HS- in real water samples.

Only a few probes are suited for highly acidic environments and sensitive to pH values below 4. Thus, finding a solution for detecting strong acidic (pH value below 2) conditions is still challenging. Herein, we constructed and created a pH-switched fluorescent probe based on pyrene and a heteroatom containing pyridine unit. When exposed to acidic environments (pH 2.0), the probe's fluorescence redshifted with distinct colour and fluorescence changes owing to protonation on the nitrogen atom containing pyridine moiety, which could be deprotonated by HS- selectively compared to other competing analytes. Pyr can detect HS- with a rapid response within 5 s and showed very good quantum yield under acidic environments. The sensing mechanism was confirmed by Density Functional Theory (DFT) studies using the B3LYP and 6-31G+ (d) basis sets. Furthermore, the probe was utilized to monitor HS- in actual water samples and identify H2S gas by a simple paper strip test.

Electro- and photochemical H2 generation by Co(ii) polypyridyl-based catalysts bearing ortho-substituted pyridines.

Cobalt(ii) complexes featuring hexadentate amino-pyridyl ligands have been recently discovered as highly active catalysts for the Hydrogen Evolution Reaction (HER), whose high performance arises from the possibility of assisting proton transfer processes via intramolecular routes involving detached pyridine units. With the aim of gaining insights into such catalytic routes, three new proton reduction catalysts based on amino-polypyridyl ligands are reported, focusing on substitution of the pyridine ortho-position. Specifically, a carboxylate (C2) and two hydroxyl substituted pyridyl moieties (C3, C4) are introduced with the aim of promoting intramolecular proton transfer which possibly enhances the efficiency of the catalysts. Foot-of-the-wave and catalytic Tafel plot analyses have been utilized to benchmark the catalytic performances under electrochemical conditions in acetonitrile using trifluoroacetic acid as the proton source. In this respect, the cobalt complex C3 turns out to be the fastest catalyst in the series, with a maximum turnover frequency (TOF) of 1.6 (±0.5) × 105 s-1, but at the expense of large overpotentials. Mechanistic investigations by means of Density Functional Theory (DFT) suggest a typical ECEC mechanism (i.e. a sequence of reduction - E - and protonation - C - events) for all the catalysts, as previously envisioned for the parent unsubstituted complex C1. Interestingly, in the case of complex C2, the catalytic route is triggered by initial protonation of the carboxylate group resulting in a less common (C)ECEC mechanism. The pivotal role of the hexadentate chelating ligand in providing internal proton relays to assist hydrogen elimination is further confirmed within this novel class of molecular catalysts, thus highlighting the relevance of a flexible polypyridine ligand in the design of efficient cobalt complexes for the HER. Photochemical studies in aqueous solution using [Ru(bpy)3]2+ (where bpy = 2,2'-bipyridine) as the sensitizer and ascorbate as the sacrificial electron donor support the superior performance of C3.

Structurally Regulated Carbazole-Pyridine Derivatives Based on Space-Crowded Theory for Efficient Narrowband Ultraviolet Nondoped Organic Light-Emitting Diodes from the High-Lying Reverse Intersystem Crossing Process.

Achieving ultraviolet and narrowband emission simultaneously in nondoped organic light-emitting diodes (OLEDs) remains a tremendous challenge. Here, a "space-crowded donor-acceptor-donor" molecular design strategy is proposed for developing ultraviolet pure organic fluorophores by the nearby substituted positions at the phenyl linker between carbazole and pyridine units. Benefitting from the large steric hindrance effect, multiple intramolecular interactions, and low-frequency vibronic coupling dominated excited state property, all the emitters exhibit excellent fluorescence efficiencies at the solid state as well as the narrow full width at half maximums (FWHMs). Moreover, the effect of different substitution positions of pyridine on the structure-property relationship is also revealed. Consequently, the nondoped OLEDs exhibit an electroluminescence emission peak of 397 nm with FWHMs of 17 and 22 nm. Due to the high-lying reverse intersystem crossing process, external quantum and exciton utilization efficiencies of 3.6 and 54.55%, respectively, have been achieved based on the emitter with para-linkage. These findings may pave an avenue for the development of high-performance narrowband ultraviolet materials and OLEDs.

Pyridinium-derived polycationic covalent organic polymers for aromatic C–H bond photocatalytic oxidation

Using oxygen in the air as the sole oxidant to oxidize hydrocarbons into high value-added compounds is a highly promising synthesis strategy with economic advantages. However, the oxidation of hydrocarbons with molecular oxygen under mild conditions is challenging due to the large C–H bond energy in hydrocarbons. Herein, a metal-free two-dimensional covalent organic polymers (COP) functionalized by photoactive pyridinium units has been developed for heterogeneous photocatalytic oxidation of hydrocarbons. This is the first kind of COPs material that can achieve photocatalytic oxidation of hydrocarbons without any additives or stoichiometric oxidants except for the oxygen in the air.

Expeditious fluorimetric detection of bilirubin by simple imidazole derived luminophore and it's pragmatic applicability in spiked biological fluids

Bilirubin is an indispensable biomarker for liver diseases. Utilizing organic molecules as sensor platform for effective detection of bilirubin are little. In addition, the reported fluorophores required longer incubation time for detection. Hence, herein we have attempted to design an imidazole derivative 4-(3H-imidazo[4,5-b]pyridin-2-yl)-N,N-diphenylaniline (IMI) from triphenylamine and pyridine units which could detect bilirubin swiftly without any incubation period. IMI manifested an instant quenching of emission in presence of bilirubin with limit of detection (LOD) 11.74 × 10−6 mol L−1. The mechanistic aspect of detection involves coexistence of both static and dynamic quenching which was suitably justified. Finally, the pragmatic application of IMI was performed in bio-fluids.

Coordination-Controlled Electrodeposition of Palladium/Copper Thin Films onto a Pyridine-Terminated Self-Assembled Monolayer

A scheme for the electrodeposition of ultrathin bimetallic layers on top of a self-assembled monolayer (SAM) is investigated which combines the deposition of one metal (Pd) coordinated to a functionalized SAM (3-(4-pyridine-4-yl-phenyl)-propane-1-thiol, PyP3) on Au/mica with another metal (Cu) from the bulk electrolyte. The coordination-controlled electrodeposition (CCED) is a four-phase process comprising (i) Pd2+ coordination to the terminal pyridine units of the SAM, (ii) reduction of Pd and nanoparticle formation, (iii) formation of an intermixed shell of Pd and Cu, and (iv) deposition of bulk Cu. Chronoamperometry reveals a fast nucleation phase where Pd nanoparticles form within a few milliseconds and seed the Cu deposition. The Pd-Cu core-shell nature of deposited nanoparticles is confirmed by transmission electron microscopy (TEM). Harnessing the selective coordination of Pd2+ to PyP3, a one-pot procedure is further developed using electrolytes containing both Pd2+ and Cu2+ ions. Thus simplifying complexation and reduction, continuous Pd/Cu films are obtained in a multistep process as verified by scanning tunneling microscopy (STM). With a percolation threshold below 3 nm, CCED, as a SAM-controlled deposition strategy, offers an avenue for generation of ultrathin films.

Bright V-Shaped bis-Imidazo[1,2-a]pyridine Fluorophores with Near-UV to Deep-Blue Emission.

Ten novel small-molecule fluorophores containing two electron-accepting imidazo[1,2-a]pyridine (ImPy) units are presented. Each ImPy core is functionalized at its C6 position with groups featuring either electron accepting (A) or donating (D) properties, thus providing emitters with general structure X-ImPy-Y-ImPy-X (X=either A or D; Y=phenyl or pyridine). The molecules bear either a phenyl (series 4) or a pyridine (series 5) π bridge that connects the two ImPys via meta (phenyl) or 2,6- (pyridine) positions, yielding an overall V-shaped architecture. The final compounds are synthetized straightforwardly by condensation between substituted 2-aminopyridines and α-halocarbonyl derivatives. All the compounds display intense photoluminescence with quantum yield (PLQY) in the range of 0.17-0.51. Remarkably, substituent effect enables tuning the emission from near-UV to (deep-)blue region while keeping Commission Internationale de l'Éclairage (CIE) y coordinate ≤0.07. The emitting excited state is characterized by a few nanoseconds lifetime and high radiative rate constant, and its nature is modulated from pure π-π* to intramolecular charge transfer (ICT) by the electronic properties of the peripheral X substituent. This is further corroborated by the nature of the frontier orbitals and vertical electronic excitations computed at (time-dependent) density functional level of theory (TD-)DFT. Finally, this study enlarges the palette of bright deep-blue emitters based on the interesting ImPy scaffolds in view of their potential application as photo-functional materials in optoelectronics.

13.2% EQE near-infrared TADF OLED with emission peak at 761 nm

Near infrared (NIR) emitters have attracted much attention due to their advanced application in biomedical sensing/imaging, and telecommunications. However, the development of efficient NIR thermally activated delayed fluorescence (TADF) emitters with the emission over 750 nm is still a challenge. Herein two Y-shaped NIR TADF molecules (Py-TPA and Py-CN-TPA) were introduced. The inclusion of pyridine unit in these two emitters not only extended the conjugated system but also increased the molecular aspect ratios, thereby leading to their high horizontal ratio of emitting dipole orientation (Θ//). In addition, the NIR emitter showed a low Huang-Rhys (HR) factor in thin film relative to that in solution, indicating a low non-radiative transition rate and a high photoluminescent quantum yield (PLQY). Consequently, TADF OLED based on Py-TPA demonstrated a record-high external quantum efficiency (EQE) of 22.2% at 726 nm, 16.3% at 747 nm, and 13.2% at 761 nm.

J- and H-aggregates of heavy-atom-free Aza-BODIPY dyes with high 1O2 generation efficiency and photodynamic therapy potential

Aggregation of molecules offers a facile way to tune the optical properties of dyes, thus providing a design platform for organic nano-photosensitizers (PSs) with the potential in photodynamic therapy (PDT). However, it is still a great challenge to control the molecular organization of dye monomers to form a specific aggregation to maximize the efficiency of PDT. Herein, we present a novel supramolecular strategy to build nano-PSs from metastable aggregation of heavy-atom-free Aza-BODIPY dyes (BDP-1 and BDP-2) bearing pyridine units, which represented high singlet oxygen (1O2) generation efficiency (up to 0.85–0.89) to overcome the several intrinsic drawbacks of traditional heavy-atom Aza-BODIPY PSs. X-ray crystallographic analysis and theoretical calculations revealed that multiple intermolecular electrostatic interactions triggered the formation of J- and H-aggregates, which transformed excited state properties of the chromophores and promoted the intersystem crossing (ISC) process by reducing singlet-triplet energy gaps (ΔEST) and radiative decay. This study provides insights for clarifying the relationship between molecular structure and aggregates properties by ingenious molecular design and engineering, which should open up new opportunities to construct functional aggregates for PDT.

Composition‐Conditioning Agent for Doped Spiro‐OMeTAD to Realize Highly Efficient and Stable Perovskite Solar Cells

AbstractThe doped Spiro‐OMeTAD hole transport layer (HTL) formed using the lithium bis(trifluoromethane) sulfonimide salt and 4‐tert‐butylpyridine with phenethylammonium iodide surface treatment on a perovskite film has continuously dominated the record power conversion efficiencies (PCEs) of perovskite solar cells (pero‐SCs). However, unstable HTL compositions and iodide salts can cause severe device degradation. In this study, an HTL composition‐conditioning agent (CCA), Spiro‐BD‐2OEG, is designed, which contains a Spiro‐OMeTAD‐like backbone, functional pyridine units, and oligo (ethylene glycol) chains. This finely designed CCA presents good miscibility with Spiro‐OMeTAD and its dopants and acts as a conditioning agent through weak bond interactions. As a result, the CCA‐regulated HTL shows a pinhole‐free and smooth morphology with enhanced Spiro‐OMeTAD ordering and improves dopant stability. In addition, the gradient‐distributed CCA in the HTL can narrow the energy level offset with the valence band of the perovskite. The resultant pero‐SCs exhibit an excellent PCE of 24.19% without any interface treatment and weak size dependence. A remarkable PCE of 22.63% is obtained even for a 1.004‐cm2 device. Importantly, the strategy shows good universality and significantly promotes the long‐term stability of the pero‐SCs based on the classical doped Spiro‐OMeTAD.

Alkoxy-Substituted Quadrupolar Fluorescent Dyes.

Polar and polarizable π-conjugated organic molecules containing push-pull chromophores have been investigated extensively in the past. Identifying unique backbones and building blocks for fluorescent dyes is a timely exercise. Here, we report the synthesis and characterization of a series of fluorescent dyes containing quadrupolar A-D-A constitutions (where A = acceptor and D = donor), which exhibit fluorescence emission at a variety of different wavelengths. We have investigated the effects of different electron-withdrawing groups, located at both termini of a para-terphenylene backbone, by steady-state UV/vis and fluorescence spectroscopy. Pyridine and substituted pyridinium units are also introduced during the construction of the quadrupolar backbones. Depending on the quadrupolarity, fluorescence emission wavelengths cover from 380 to 557 nm. Time-resolved absorption and emission spectroscopy reveal that the photophysical properties of those quadrupolar dyes result from intramolecular charge transfer. One of the dyes we have investigated is a symmetrical box-like tetracationic cyclophane. Its water-soluble tetrachloride, which is non-cytotoxic to cells up to a loading concentration of 1 μM, has been employed in live-cell imaging. When taken up by cells, the tetrachloride emits a green fluorescence emission without any hint of photobleaching or disruption of normal cell behavior. We envision that our design strategy of modifying molecules through the functionalization of the quadrupolar building blocks as chromophores will lead to future generations of fluorescent dyes in which these A-D-A constitutional fragments are incorporated into more complex molecules and polymers for broader photophysical and biological applications.

Total Synthesis of the Tetracyclic Pyridinium Alkaloid epi-Tetradehydrohalicyclamine B.

The first total synthesis of a tetracyclic marine pyridinium alkaloid hinged on recent advances in chemoselectivity management: While many classical methods failed to afford the perceptively simple pyridine-containing core of the target, nickel/iridium photoredox dual catalysis allowed the critical C-C bond to be formed in good yield. Likewise, ring closing alkyne metathesis (RCAM) worked well in the presence of the unhindered pyridine despite the innately Lewis acidic Mo(+6) center of the alkylidyne catalyst. Finally, an iridium catalyzed hydrosilylation was uniquely effective in reducing a tertiary amide without compromising an adjacent pyridine and the lateral double bonds; this transformation is largely without precedent. The second strained macrocycle enveloping the core was closed by intramolecular N-alkylation with formation of the pyridinium unit; the reaction proceeded site- and chemoselectively in the presence of an a priori more basic tertiary amine.

Total Synthesis of the Tetracyclic Pyridinium Alkaloid epi‐Tetradehydrohalicyclamine B

AbstractThe first total synthesis of a tetracyclic marine pyridinium alkaloid hinged on recent advances in chemoselectivity management: While many classical methods failed to afford the perceptively simple pyridine‐containing core of the target, nickel/iridium photoredox dual catalysis allowed the critical C−C bond to be formed in good yield. Likewise, ring closing alkyne metathesis (RCAM) worked well in the presence of the unhindered pyridine despite the innately Lewis acidic Mo(+6) center of the alkylidyne catalyst. Finally, an iridium catalyzed hydrosilylation was uniquely effective in reducing a tertiary amide without compromising an adjacent pyridine and the lateral double bonds; this transformation is largely without precedent. The second strained macrocycle enveloping the core was closed by intramolecular N‐alkylation with formation of the pyridinium unit; the reaction proceeded site‐ and chemoselectively in the presence of an a priori more basic tertiary amine.

Effect of Nitrogen Atom Introduction on the Photocatalytic Hydrogen Evolution Activity of Covalent Triazine Frameworks: Experimental and Theoretical Study.

The construction of high-performance photocatalyst has always been explored. Covalent organic frameworks (COFs), especially keto-amine-linked COFs, have many advantages, such as adjustable bandgaps, π-π stacking structure, excellent response ability to visible light, high specific surface area, high mobility of carrier carriers, good physical and chemical stability, and so on, showing strong potential applications in photocatalytic solar energy conversion and hydrogen production. Two analogous covalent triazine frameworks (CTFs), T3H-CTF and T3N-CTF, have been synthesized via Schiff-base condensation reactions between 2,4,6-trihydroxybenzene-1,3,5-tricarbalehyde (MOP) and the corresponding triazine-based aromatic amines under solvothermal condition. For T3N-CTF, the peripheral aromatic linker to the central triazine unit was the pyridine unit, instead of the benzene unit in the T3H-CTF unit. T3N-CTF had a hydrogen production rate (HPR) of 6485.05 μmol g-1 h-1 , much higher than that of T3H-CTF (2028.06 μmol g-1 h-1 ). Accordingly, T3N-CTF had a much higher apparent quantum yield (AQY) of 12.2 % than that of T3H-CTF (4.12 %) at 405 nm. The experimental and theoretical results showed that the extended light absorption range, enlarged surface area, and enhanced separation and transportation efficiencies of charge carriers of T3N-CTF compared with T3H-CTF were uniformly induced by the introduction of peripheral nitrogen atoms into the skeleton of former CTF, which eventually boosted the visible-light induced hydrogen evolution reaction (HER). The work suggests a new method for enhancing the intrinsic HER activity by modulating the electronic features of the conjugated COFs by the introduction of pyridinic N atoms.

An Au(111)-dominant polycrystalline gold/gold nanoparticles/1,8-naphthyridine/glassy carbon electrode for anodic stripping voltammetry determination of As(III)

We report the fabrication of a 1,8-naphthyridine (Naph), gold nanoparticles and then Au(111)-dominant polycrystalline gold (Au(111)dpg) modified glassy carbon electrode (GCE) for linear sweep anodic stripping voltammetry (LSASV) determination of As(III). An ultrathin film of Naph was chemically bonded on a GCE by electroreduction of Naph in acidic solution. The bipyridine group of Naph on the Naph/GCE can capture gold nanoparticles (AuNPs) by coordination adsorption and can then direct an Au(111) oriented crystalline growth during gold staining in HAuCl4–NH2OH solution, due to the different affinities of Au(110), Au(100) and Au(111) facets to the pyridine unit in Naph. The prepared Au(111)dpg/AuNPs/Naph/GCE and the control electrodes were characterized by electrochemical methods, X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microcopy. LSASV determination of As(III) was performed on the Au(111)dpg/AuNPs/Naph/GCE with high performance. Sensitivity values of 11.6 µA ppb–1 (2.3∼75 ppb) and 3.1 µA ppb–1 (2.3∼75 ppb), as well as limit of detection values of 0.15 ppb and 0.52 ppb (S/N = 3) were obtained on the basis of the LSASV oxidation signals of As(0)→As(III) and As(III)→As(V), respectively. The Au(111)dpg/AuNPs/Naph/GCE was applied for As(III) determination in river water samples with satisfied results.

A New Paradigm in Pincer Iridium Chemistry: PCN Complexes for (De)Hydrogenation Catalysis and Beyond.

The discovery and development of organometallic catalysts is of paramount importance in modern organic synthesis, among which the ligand scaffolds play a crucial role in controlling the activity and selectivity. Over the past several decades, d8 transition-metal complexes of pincer ligands have been developed extensively thanks to their easy structural modification, versatile reactivities, and high stability. One paradigm is the bis(phosphine)-based pincer iridium complexes PCP-Ir, which are highly active for alkane dehydrogenation, partly due to their high thermostability. However, except for alkane dehydrogenation and related transformations, few applications of pincer iridium catalysis have been seen in organic synthesis. This mainly arises from the low functional-group compatibility and poor substrate scope and the limited catalytic chemistry that invariably involves Ir(I/III) redox processes initiated by oxidative addition of substrates to 14-electron (PCP)Ir fragments (the proposed catalytically active intermediates). In this Account, we describe our endeavor on the development of a new family of PCN-Ir complexes with initial intention on creating more efficient alkane dehydrogenation catalysts. The replacement of a soft, σ-donor phosphine arm in the PCP ligands by a harder, π-acceptor N-heteroarene (pyridine or oxazoline) not only provides an additional platform to modify the structural properties but also offers new modes of bond activation and novel reactivities and catalysis. One uniqueness of the PCN-Ir system lies in the formation, via ortho-C(sp2)-H cyclometalation of the pyridine unit in the PCNPy ligand, of the neutral monohydride (PCC)IrIIIHL (L = neutral ligand), which catalyzes positional and stereoselective 1-alkene-to-(E)-2-alkene isomerization. Moreover, the PCN-Ir catalysts effect ethanol dehydrogenation without decarbonylation, allowing for transfer hydrogenation of unactivated alkenes and trans-selective semihydrogenation of internal alkynes with user-friendly ethanol as the H-donor. Another feature originates from the ability of the pentacoordinate hydrido chloride complex (PCN)IrIIIHCl to undergo reversible solvent-coordination-induced-ionization (SCII), furnishing a cationic monohydride [(PCN)IrIIIH(Sol)]+Cl- bearing an uncoordinated Cl anion that effects selective hydrometalation of internal alkynes over the corresponding (Z)-alkenes; the resulting (PCN)IrIII(vinyl)Cl complex undergoes amine-assisted formal alcoholysis involving the protonation of the Cl anion by the activated IrIII-bound EtOH, again via the SCII pathway. Together these elementary reactions lay the foundation for cis-selective semihydrogenation of alkynes with EtOH. Further, the design of the oxazoline-containing chiral complexes (PCNOxa)IrIIIHCl enables asymmetric transfer hydrogenation of alkenes/ketones with ethanol. The efficient catalytic α-alkylation of unactivated esters/amides with alcohols is another case showing the benefit that the PCN-Ir catalyst can offer. These examples illustrate the profound impact of the pincer ligands on the reactivities and catalysis. We hope this Account will provide an in-depth view into the fundamentals of pincer iridium chemistry and ultimately broaden its applications in organic synthesis.

Benzo[1,2-b:4,3-b’]dithiophene-pyridine isomers: Synthesis, self-assembly, photophysical and acidochromic properties

Two benzo[1,2-b:4,3-b’]dithiophene-pyridine-based bent shaped isomers (3BDTPy12 and 4BDTPy12) have been synthesized via Suzuki coupling reactions as key steps. They differ themselves in the position of N-atom on the pyridine unit which has generated significant effect on their self-assembly behavior and photophysical properties. 4BDTPy12 with N in the para position in the pyridine ring can self-assemble into a columnar liquid crystalline phase while its isomer 3BDTPy12 with N in the meta position in the pyridine ring is only a crystal. Both compounds can form gels in different organic solvents but with different morphologies. The influence of the solvent polarities and doping agents including chiral L-phenylalanine (L-Phe), trifluoroacetic acid as well as L-tartaric acid on their gel morphologies were also studied. The gel of 4BDTPy12 doped with L-tartaric acid could produce enhanced yellow emission which can be used to generate WLED, and such compounds can be used as chemosensors towards volatile acid-base vapors with good reversibility.

The New Di-Gold Metallotweezer Based on an Alkynylpyridine System.

We developed a simple method to prepare one gold-based metallotweezer with two planar Au-pyrene-NHC arms bound by a 2,6-bis(3-ethynyl-5-tert-butylphenyl)pyridine unit. This metallotweezer is able to bind a series of polycyclic aromatic hydrocarbons through the π-stacking interactions between the polyaromatic guests and the pyrene moieties of the NHC ligands. The metallotweezer was also used as a host for the encapsulation of planar metal complexes, such as the Au(III) complex [Au(C^N^C)(C≡CC6H4-OCH3-p)], for which there is a large binding constant of 946 M−1.

Dielectric, electro-optical and viscoelastic properties of nematic phase driven by hydrogen-bonding between cyano group and fluoroalkoxybenzoic acid

ABSTRACT Hydrogen-bonded liquid crystals (HBLC) formed by mixing 4-alcyloxy-2-fluorobenzoic acid (nOBAF) and the 4-pentyl-4-biphenylcarbonitrile (5CB) at (1:1), (1:3) and (3:1) (mol/mol) ratios have been investigated. Four HBLC series are prepared by changing the carbon chain length from 7 to 10 designated 5CB/nOBAF. The fluorobenzoic acids (nOBAF) are the proton donors while the pyridine unit (5CB) is the proton acceptors. Thermal behaviour and phase diagrams of the individual series have been established using differential scanning Calorimetry (DSC) and polarising optical microscopy (POM). It was found that all complexes exhibit nematic (N) and smectic G (SmG) phases. For the nematic phase, the dielectric anisotropy was increased while the thresholds voltage was decreased. This can be explained by the strong longitudinal dipole moment of the nematic phase compared to the nOBAF compounds. Furthermore, as the alkoxy chain length increases, the birefringence, response time, rotational viscosity, and splay elastic constant all decrease by the way of the reduction of the order parameter for the longer chains. In addition, hydrogen-bonded proton transfer between cyano and carboxylic acid groups have been explored by Fourier transform infrared spectroscopy (FTIR) for the first time.