Purification Of Monoclonal Antibodies Research Articles

Buffer system improves the removal of host cell protein impurities in monoclonal antibody purification.

Polysorbates (PS) are commonly used as stabilizers of biopharmaceuticals such as monoclonal antibodies (mAbs). However, they are prone to chemical and enzymatic degradation. The latter can be caused by residual host cell proteins (HCPs) in the drug substance. Degradation affects the functionality of the PS surfactant which can lead to formation of particles. An increasing number of publications describe enzymatic PS degradation. Significant efforts have been made to characterize HCP removal during Downstream Processing (DSP) of mAbs and to develop mitigation strategies. Here we describe the use of glycine buffer for acidic elution in Protein A affinity chromatography compared to acetate buffer, which is more commonly used in the biopharmaceutical industry. Increased turbidity was observed during pH re-adjustment after low pH virus inactivation when using glycine buffer. Analytical data suggests that this turbidity is caused by the formation of precipitates which include HCP and DNA impurities. Additionally, as a zwitterion, glycine does not contribute to conductivity; this further enhances HCP removal during anion-exchange flow-through chromatography. Although glycine is well known as a possible elution buffer for Protein A affinity chromatography, its positive impact on HCP removal and PS stability have not yet been described in literature.

Development of charged membranes for the ultrafiltration of siRNA

RNA interference (RNAi) is an exciting new therapeutic approach, using small interfering RNA (siRNA) to silence specific genes for treating various diseases. Ultrafiltration has been widely used for the concentration and purification of monoclonal antibodies and other biotherapeutics; however, its application in the downstream processing of double-stranded oligonucleotides remains underexplored. This study investigates the use of ultrafiltration in the final formulation for concentrating a siRNA drug substance. Initial experiments were conducted with Ultracel™ composite regenerated cellulose membranes over a range of molecular weight cutoffs (MWCO) at different siRNA feed concentrations. Results demonstrated significant effects of both fouling and concentration polarization, with the maximum achievable concentration falling well below the target required for subcutaneous injection. Novel surface-modified ultrafiltration membranes were made by reaction of the cellulose with bromopropanesulfonic acid. These negatively charged membranes showed improved siRNA retention, reduced fouling, and a large increase in the maximum achievable siRNA concentration (from 52 to >180 mg/mL). These findings offer critical insights into novel approaches for developing high performance ultrafiltration processes for siRNA concentration.

Impact of ligand structure and base bead pore size on host cell protein removal during monoclonal antibody purification using multimodal chromatography resin

Despite advancements in therapeutic monoclonal antibodies (mAbs) and cell line engineering, separating host cell proteins (HCPs) from mAbs during downstream purification remains challenging. Therefore, in this study, we developed a novel multimodal chromatography (MMC) resin to enhance HCP removal during mAb polishing processes. We evaluated the impact of both ligand structure and pore size of the MMC resin by purifying a post-protein A chromatography solution in flow-through mode. We observed that the efficiency of HCP clearance depended on the hydrophobic moiety structure of the ligand and predicted the mAb purification capability of MMC through linear salt-gradient elution experiments involving a mixture of transferrin, bovine serum albumin (BSA), and pepsin. Our findings revealed that the prototype immobilized 1,12-dodecanediamine via the formyl group exhibited the best performance attributed to its long alkyl chain. Furthermore, an investigation of effects of base bead pore size on HCP capacity using cellulose base beads of five different pore sizes showed that larger pore resin base beads had the highest HCP removal capacity. Specifically, MMC resins with a pore diameter exceeding 440 nm reduced the HCP level by three orders of magnitude under high mAb loading conditions (> 1000 mg/mL-resin). The MMC resin developed in this study, along with the insights gained into ligand structure and pore size, not only enhances mAb polishing efficiency but also contributes to improving downstream processes in mAb biopharmaceutical production.

Purification of secretory IgA monoclonal antibodies enriched fraction directly from cell culture medium using aqueous two-phase systems

Secretory immunoglobulin A [sIgA] is a promising candidate for enteric therapeutics applications, and several sIgA-based constructs are currently being developed by groups utilizing clarified Chinese hamster ovary [CHO] cell culture supernatants. To the monoclonal antibody downstream processing typically entails chromatography-based purification processes beginning with Protein A chromatography. In this paper, aqueous two-phase systems [ATPS] were employed for the preliminary purification of secretory immunoglobulin A [sIgA] monoclonal antibody [mAb] from clarified CHO-cell culture supernatants. A 24 full factorial design was utilized. The influence of various process parameters such as pH, PEG molecular weight [MPEG], PEG concentration [CPEG], and phosphate salt concentration [CPHO], on the sIgA partition coefficient [K sIgA] and the recovery index [Y] in the PEG phase were evaluated. The Elisa assay revealed that, in the ATPS conditions tested, sIgA mAb was mostly detected in PEG upper phase. Run 14 with the highest sIgA activity exhibited the following conditions: MPEG 8.000 g/mol, CPEG 12,5 %, pH 7,0 and CPHO 10 %, and a sIgA K of 94.50 and a recovery index [Y] of 33.52 %. The proposed platform provides straightforward implementation, yields comparable results, and offers significantly improved economics for manufacturing sIgA mAb biotherapeutics.

Integrated micro-scale protein a chromatography and Low pH viral inactivation unit operations on an automated platform.

High throughput process development (HTPD) is established for time- and resource- efficient chromatographic process development. However, integration with non-chromatographic operations within a monoclonal antibody (mAb) purification train is less developed. An area of importance is the development of low pH viral inactivation (VI) that follows protein A chromatography. However, the lack of pH measurement devices at the micro-scale represents a barrier to implementation, which prevents integration with the surrounding unit operations, limiting overall process knowledge. This study is based upon the design and testing of a HTPD platform for integration of the protein A and low pH VI operations. This was achieved by using a design and simulation software before execution on an automated liquid handler. The operations were successfully translated to the micro-scale, as assessed by analysis of recoveries and molecular weight content. The integrated platform was then used as a tool to assess the effect of pH on HMWC during low pH hold. The laboratory-scale and micro-scale elution pools showed comparable HMWC across the pH range 3.2-3.7. The investigative power of the platform is highlighted by evaluating the resources required to conduct a hypothetical experiment. This results in lower resource demands and increased labor efficiency relative to the laboratory-scale. For example, the experiment can be conducted in 7 h, compared to 105 h, translating to labor hours, 3 h and 28 h for the micro-scale and laboratory-scale, respectively. This presents the opportunity for further integration beyond chromatographic operations within the purification sequence, to establish a fit-to-platform assessment tool for mAb process development.

An Affinity Chromatography Technique for the Purification of Monoclonal Antibodies

An Affinity Chromatography Technique for the Purification of Monoclonal Antibodies

An Affinity Chromatography Technique for the Purification of Monoclonal Antibodies

An Affinity Chromatography Technique for the Purification of Monoclonal Antibodies

Chromatography affinity resin with photosynthetically-sourced protein A ligand

Green, photosynthesizing plants can be proficiently used as cost-effective, single-use, fully biodegradable bioreactors for environmentally-friendly production of a variety of valuable recombinant proteins. Being near-infinitely scalable and most energy-efficient in generating biomass, plants represent profoundly valid alternatives to conventionally used stationary fermenters. To validate this, we produced a plastome-engineered tobacco bioreactor line expressing a recombinant variant of the protein A from Staphylococcus aureus, an affinity ligand widely useful in antibody purification processes, reaching accumulation levels up to ~ 250 mg per 1 kg of fresh leaf biomass. Chromatography resin manufactured from photosynthetically-sourced recombinant protein A ligand conjugated to agarose beads demonstrated the innate pH-driven ability to bind and elute IgG-type antibodies and allowed one-step efficient purification of functional monoclonal antibodies from the supernatants of the producing hybridomas. The results of this study emphasize the versatility of plant-based recombinant protein production and illustrate its vast potential in reducing the cost of diverse biotechnological applications, particularly the downstream processing and purification of monoclonal antibodies.

Purification of monoclonal antibodies using novel 3D printed ordered stationary phases

3D printing offers the unprecedented ability to fabricate chromatography stationary phases with bespoke 3D morphology as opposed to traditional packed beds of spherical beads. The restricted range of printable materials compatible with chromatography is considered a setback for its industrial implementation. Recently, we proposed a novel ink that exhibits favourable printing performance (printing time ∼100 mL/h, resolution ∼200 µm) and broadens the possibilities for a range of chromatography applications thanks to its customisable surface chemistry. In this work, this ink was used to fabricate 3D printed ordered columns with 300 µm channels for the capture and polishing of therapeutic monoclonal antibodies. The columns were initially assessed for leachables and extractables, revealing no material propensity for leaching. Columns were then functionalised with protein A and SO3 ligands to obtain affinity and strong cation exchangers, respectively. 3D printed protein A columns showed >85 % IgG recovery from harvested cell culture fluid with purities above 98 %. Column reusability was evaluated over 20 cycles showing unaffected performance. Eluate samples were analysed for co-eluted protein A fragments, host cell protein and aggregates. Results demonstrate excellent HCP clearance (logarithmic reduction value of > 2.5) and protein A leakage in the range of commercial affinity resins (<100 ng/mg). SO3 functionalised columns employed for polishing achieved removal of leaked Protein A (down to 10 ng/mg) to meet regulatory expectations of product purity. This work is the first implementation of 3D printed columns for mAb purification and provides strong evidence for their potential in industrial bioseparations.

Modeling scalability of impurity precipitation in downstream biomanufacturing.

Precipitation during the viral inactivation, neutralization and depth filtration step of a monoclonal antibody (mAb) purification process can provide quantifiable and potentially significant impurity reduction. However, robust commercial implementation of this unit operation is limited due to the lack of a representative scale-down model to characterize the removal of impurities. The objective of this work is to compare isoelectric impurity precipitation behavior for a monoclonal antibody product across scales, from benchtop to pilot manufacturing. Scaling parameters such as agitation and vessel geometry were investigated, with the precipitate amount and particle size distribution (PSD) characterized via turbidity and flow imaging microscopy. Qualitative analysis of the data shows that maintaining a consistent energy dissipation rate (EDR) could be used for approximate scaling of vessel geometry and agitator speeds in the absence of more detailed simulation. For a more rigorous approach, however, agitation was simulated via computational fluid dynamics (CFD) and these results were applied alongside a population balance model to simulate the trajectory of the size distribution of precipitate. CFD results were analyzed within a framework of a two-compartment mixing model comprising regions of high- and low-energy agitation, with material exchange between the two. Rate terms accounting for particle formation, growth and breakage within each region were defined, accounting for dependence on turbulence. This bifurcated model was successful in capturing the variability in particle sizes over time across scales. Such an approach enhances the mechanistic understanding of impurity precipitation and provides additional tools for model-assisted prediction for process scaling.

A Novel 3D-Printed and Miniaturized Periodic Counter Current Chromatography System for Continuous Purification of Monoclonal Antibodies.

Continuous chromatography has emerged as one of the most attractive methods for protein purification. Establishing such systems involves installing several chromatographic units in series to enable continuous separation processes and reduce the cost of the production of expensive proteins and biopharmaceuticals (such as monoclonal antibodies). However, most of the established systems are bulky and plagued by high dead volume, which requires further optimization for improved separation procedures. In this article, we present a miniaturized periodic counter-current chromatography (PCCC) system, which is characterized by substantially reduced dead volume when compared to traditional chromatography setups. The PCCC device was fabricated by 3D printing, allowing for flexible design adjustments and rapid prototyping, and has great potential to be used for the screening of optimized chromatography conditions and protocols. The functionality of the 3D-printed device was demonstrated with respect to the capture and polishing steps during a monoclonal antibody purification process. Furthermore, this novel miniaturized system was successfully used for two different chromatography techniques (affinity and ion-exchange chromatography) and two different types of chromatographic units (columns and membrane adsorbers). This demonstrated versability underscores the flexibility of this kind of system and its potential for utilization in various chromatography applications, such as direct product capture from perfusion cell cultures.

Affinity Resins for the Isolation of Immunoglobulins G Obtained Using Biocatalytic Technology.

Affinity chromatography resins that are obtained by conjugation of matrices with proteins of bacterial origin, like protein A, are frequently used for the purification of numerous therapeutic monoclonal antibodies. This article presents the development of a biocatalytic method for the production of novel affinity resins with an immobilized mutant form of protein A via sortase A mediated reaction. The conditions for activation of the agarose Seplife 6FF matrix, selection of different types of linkers with free amino groups and conditions for immobilization of recombinant protein A on the surface of the activated matrix were studied. Finally, the basic operational properties, like dynamic binding capacity (DBC), temperature dependance of DBC and stability during the cleaning-in-place process of the affinity resin with the Gly-Gly-EDA-Gly-Gly linker, were assessed using recombinant hyperchimeric monoclonal antibodies. The main characteristics show comparable results with the widely used commercial samples.

Enhancing affinity purification of monoclonal antibodies from human serum for subsequent CZE-MS analysis

Due to the separation technique employed, capillary electrophoresis coupled to mass spectrometry (CE-MS) analysis performances are significantly influenced by the chemical composition and the complexity of the sample. In various applications, that impact has prevented the use of CE-MS for the characterization and quantification of proteins in biological samples. Here we present the development and evaluation and a sample preparation procedure, based on affinity purification, for the specific extraction of the monoclonal antibody (mAbs) infliximab from human serum in order to perform subsequent proteolytic digestion and CE-MS/MS analysis. Three distinctive sample preparation strategies were envisaged. In each case, the different steps composing the protocol were thoroughly optimized and evaluated in order to provide a sample preparation addressing the important complexity of serums samples while providing an optimal compatibility with CE-MS/MS analysis. The different sample preparation strategies were assessed concerning the possibility to achieve an appropriate absolute quantification of the mAbs using CE-MS/MS for samples mimicking patient serum samples. Also, the possibility to perform the characterization of several types of post-translational modifications (PTMs) was evaluated. The sample preparation protocols allowed the quantification of the mAbs in serums samples for concentration as low as 0.2 µg·mL−1 (2.03 nM) using CE-MS/MS analysis, also the possibility to characterize and estimate the modification level of PTMs hotspots in a consistent manner. Results allowed to attribute the effect on the electrophoretic separation of the different steps composing sample preparation. Finally, they demonstrated that sample preparation for CE-MS/MS analysis could benefit greatly for the extended applicability of this type of analysis for complex biological matrices.

Development of continuous processing platform utilizing aqueous two-phase extraction for purification of monoclonal antibodies

Monoclonal antibody downstream processing typically entails chromatography-based purification processes beginning with Protein A chromatography, accounting for 50% of the total manufacturing expense. Alternatives to protein A chromatography have been explored by several researchers. In this paper, aqueous two-phase extraction (ATPE) has been proposed for continuous processing of monoclonal antibodies (mAbs) as an alternative to the traditional protein A chromatography. The PEG-sulphate system has been employed for phase formation in ATPE, and the mAb is separated in the salt phase, while impurities like high molecular weight (HMW) and host cell proteins (HCPs) are separated in the PEG phase. Following ATPE of clarified cell culture harvest, yield of ≥ 80 % and purity of ≥ 97% were achieved in the salt phase. Considerable (28 %) reduction in consumable cost has been estimated when comparing the proposed platform to the traditional protein A based platform. The outcomes demonstrate that ATPE can be a potentially effective substitute for the traditional Protein A chromatography for purification of mAbs. The proposed platform offers easy implementation, delivers comparative results, and offers significantly better economics for manufacturing mAb-based biotherapeutics.

Effect of pH, NaCl concentration, and mAb concentration of feed solution on the filterability of Planova™ 20N and Planova™ BioEX.

Virus filtration is one of the most important steps in ensuring viral safety during the purification of monoclonal antibodies (mAbs) and other biotherapeutics derived from mammalian cell cultures. Regarding the various virus retentive filters, including Planova filters, a great deal of data has been reported on the virus retention capability and its mechanism. Along with the virus retention capability, filterability is a key performance indicator for designing a robust and high-throughput virus filtration step. In order to obtain higher filterability, optimization of the feed solution conditions, and filter selection is essential; however, limited data are available regarding the filtration characteristics of Planova filters. Furthermore, for Planova 20N and Planova BioEX, the virus retention characteristics were reported to differ due to their respective membrane materials and layer structures. Whether these filters differ in their filtration characteristics is an interesting question, but no comparative evaluations have been reported. In this study, the filterability of the two filters was investigated and compared using 15 feed mAb solutions of a single mAb selected by design of experiments with different combinations of pH, NaCl concentration, and mAb concentration. The filterability of Planova 20N was affected not only by the feed solution viscosity, but also by the mAb aggregate content of the feed mAb solution and mAb-membrane electrostatic interactions. In contrast, the filterability of Planova BioEX decreased under some buffer conditions. These findings and the established design spaces of these filters provide valuable insights into the process optimization of virus filtration.

High throughput screening for rapid and reliable prediction of monovalent antibody binding behavior in flowthrough mode.

Flowthrough (FT) anion exchange (AEX) chromatography is a widely used polishing step for the purification of monoclonal antibody (mAb) formats. To accelerate downstream process development, high throughput screening (HTS) tools have proven useful. In this study, the binding behavior of six monovalent mAbs (mvAbs) was investigated by HTS in batch binding mode on different AEX and mixed-mode resins at process-relevant pH and NaCl concentrations. The HTS entailed the evaluation of mvAb partition coefficients (Kp) and visualization of results in surface-response models. Interestingly, the HTS data grouped the mvAbs into either a strong-binding group or a weak-binding/FT group independent of theoretical Isoelectric point. Mapping the charged and hydrophobic patches by in silico protein surface property analyses revealed that the distribution of patches play a major role in predicting FT behavior. Importantly, the conditions identified by HTS were successfully verified by 1 mL on-column experiments. Finally, employing the optimal FT conditions (7-9 mS/cm and pH 7.0) at a mini-pilot scale (CV = 259 mL) resulted in 99% yield and a 21-23-fold reduction of host cell protein to <100 ppm, depending on the varying host cell protein (HCP) levels in the load. This work opens the possibility of using HTS in FT mode to accelerate downstream process development for mvAb candidates in early research.

A risk-aware assessment for buffer recycling across unit operations for monoclonal antibody purification and its potential

Water for injection (WFI) for biopharmaceuticals is coming into focus considering the sustainability goals of society. WFI production consumes excessive amounts of water and energy. Strategies to reduce WFI energy cost include cold WFI production or reduction of buffer volumes used in the process. A suggested alternative with proposed saving of up to 90 % was the recycling of buffers, potentially across multiple unit operations. In this work a risk-based assessment of the idea is made to quantify the potential savings. All streams of an antibody purification were classified according to their potential risk. This analysis showed that the process does not produce sufficient recyclable outlet streams to cover all replaceable inlet streams. From a potentially replaceable 42 % of inlet buffers only a total of 23 % can be replaced, even if cross-batch recycling is allowed. If this is not allowed, the savings drop down to 14 %. While this saves some water and energy, it shows that making full use of the theoretical potential is impossible, and 90 % reduction is never achievable when risk-aware design of recycling across unit operations is used. A universal risk-based assessment is important and can build the rationale to convince regulatory authorities in case of implementation of such a strategy.

Evaluating the viral clearance ability of continuous monoclonal antibody purification steps, in order to inactivate and/or remove four model viruses.

Viral clearance studies are an essential part of a manufacturer's plan to ensure the safety of an injectable biologic product. In this way, viral safety is a critical quality attribute for biologics such as monoclonal antibodies (Mabs). Evaluation of virus purification by downstream processes is a key component of risk mitigation. In this study, the capability of continuous monoclonal antibody purification steps was evaluated in the process of instant monoclonal antibody purification in different stages of purification, and the amount of reduction or inactivation of each step was determined. Four enveloped and non-enveloped viral models VSV, Reovirus, EMCV, and HSV1 were used for spiking in selected samples in the designated tests, to have a comprehensive examination of the ability to clear the virus such as the type of genetic material, chemical resistance, and particle size. A TCID50 and qPCR methods were used to measure viral reduction. Two cell lines, Vero (African green monkey kidney) and L929 (Mouse fibroblast) were used for 4 model viruses propagation. The steps that were evaluated included 4 steps monoclonal antibody purification; cation exchange chromatography, acidic pH treatment, affinity chromatography, and nanofiltration. The nano-filter stage showed the highest viral reduction and cation exchange chromatography showed the lowest reduction. The cumulative decrease using TCID50 is equal to 19.27 [log10] for all steps and for the qPCR method is equal to 12.47 [log10] in three steps of nano-filter, affinity chromatography, and ion exchange chromatography. The overall average reduction coefficient for all four model viruses is significantly high, which indicates the high capacity of the monoclonal antibody production process in inactivating and removing viruses leads to reducing the load of all four model viruses.

Optimization and application of caprylic acid precipitation in the purification of monoclonal antibody

In response to the market demand for therapeutic antibodies, the upstream cell culture scale and expression titer of antibodies have been significantly improved, while the production efficiency of downstream purification process is relatively fall behind, and the downstream processing capacity has become a bottleneck limiting antibody production throughput. Using monoclonal antibody mab-X as experimental material, we optimized the caprylic acid (CA) precipitation process conditions of cell culture fluid and low pH virus inactivation pool, and studied two applications of using CA treatment to remove aggregates and to inactivate virus. Based on the lab scale study, we carried out a 500 L scale-up study, where CA was added to the low pH virus inactivation pool for precipitation, and the product quality and yield before and after precipitation were detected and compared. We found that CA precipitation significantly reduced HCP residuals and aggregates both before and after protein A affinity chromatography. In the aggregate spike study, CA precipitation removed about 15% of the aggregates. A virus reduction study showed complete clearance of a model retrovirus during CA precipitation of protein A purified antibody. In the scale-up study, the depth filtration harvesting, affinity chromatography, low pH virus inactivation, CA precipitation and depth filtration, and cation exchange chromatography successively carried out. The mixing time and stirring speed in the CA precipitation process significantly affected the CA precipitation effect. After CA precipitation, the HCP residue in the low pH virus inactivation solution decreased 895 times. After precipitation, the product purity and HCP residual meet the quality criteria of monoclonal antibodies. CA precipitation can reduce the chromatography step in the conventional purification process. In conclusion, CA precipitation in the downstream process can simplify the conventional purification process, fully meet the purification quality criterion of mab-X, and improve production efficiency and reduce production costs. The results of this study may promote the application of CA precipitation in the purification of monoclonal antibodies, and provide a reference for solving the bottleneck of the current purification process.

A workflow for the development of template-assisted membrane crystallization downstream processing for monoclonal antibody purification.

Monoclonal antibodies (mAbs) are commonly used biologic drugs for the treatment of diseases such as rheumatoid arthritis, multiple sclerosis, COVID-19 and various cancers. They are produced in Chinese hamster ovary cell lines and are purified via a number of complex and expensive chromatography-based steps, operated in batch mode, that rely heavily on protein A resin. The major drawback of conventional procedures is the high cost of the adsorption media and the extensive use of chemicals for the regeneration of the chromatographic columns, with an environmental cost. We have shown that conventional protein A chromatography can be replaced with a single crystallization step and gram-scale production can be achieved in continuous flow using the template-assisted membrane crystallization process. The templates are embedded in a membrane (e.g., porous polyvinylidene fluoride with a layer of polymerized polyvinyl alcohol) and serve as nucleants for crystallization. mAbs are flexible proteins that are difficult to crystallize, so it can be challenging to determine the optimal conditions for crystallization. The objective of this protocol is to establish a systematic and flexible approach for the design of a robust, economic and sustainable mAb purification platform to replace at least the protein A affinity stage in traditional chromatography-based purification platforms. The procedure provides details on how to establish the optimal parameters for separation (crystallization conditions, choice of templates, choice of membrane) and advice on analytical and characterization methods.