Pump Mechanics Research Articles

Mueller maneuver attenuates left atrial phasic volumes and myocardial strain in healthy younger adults.

The left atrium (LA) is a key, but incompletely understood, modulator of left ventricular (LV) filling. Inspiratory negative intrathoracic pressure swings alter cardiac loading conditions, which may impact LA function. We studied acute effects of static inspiratory efforts on LA chamber function, LA myocardial strain, and LV diastolic filling. We included healthy adults (10 males/9 females, 24 ± 4 yr) and used Mueller maneuvers to reduce intrathoracic pressure to -30 cmH2O for 15 s. Over six repeated trials, we used echocardiography to acquire LA- and LV-focused two-dimensional (2-D) images, and mitral Doppler inflow and annular tissue velocity spectra. Images were analyzed for LA and LV chamber volumes, tissue relaxation velocities, transmitral filling velocities, and speckle tracking-derived LA longitudinal strain. Repeated measures were made at baseline, early Mueller, late Mueller, then early release, and late release. In the late Mueller compared with baseline, LV stroke volume decreased by -10 ± 4 mL (P < 0.05) and then returned to baseline upon release; this occurred with a -11 ± 9 mL (P < 0.05) end-diastolic volume reduction. Early diastolic LV filling was attenuated, reflected by decreased tissue relaxation velocity (-2 ± 2 cm/s, P < 0.05), E-wave filling velocity (-13 ± 14 cm/s, P < 0.05), and LA passive emptying volume (-5 ± 5 mL, P < 0.05), each returning to baseline with release. LA maximal volume decreased (-5 ± 5 mL, P < 0.05) during the Mueller maneuver, but increased relative to baseline following release (+4 ± 5 mL, P < 0.05), whereas LA peak positive longitudinal strain decreased (-6 ± 6%, P < 0.05) and then returned to baseline. Attenuated LA and in turn, LV filling may contribute to acute stroke volume reductions experienced during forceful inspiratory efforts.NEW & NOTEWORTHY In healthy younger adults, the Mueller maneuver transiently reduces left atrial filling and passive emptying during the reservoir and conduit phases, respectively. Corresponding reductions are seen in left atrial reservoir and conduit phase longitudinal myocardial strain and strain rate. However, left atrial pump phase active function and mechanics are largely preserved compared with baseline. Rapid changes in LA chamber volumes and myocardial strain with recurrent forceful inspiratory efforts and relaxation may reflect acute LA stress.

Beban Lebih Elektro Motor Pompa Ejektor Pada Fresh Water Generator di Atas Kapal Motor Penumpang Mutiara Ferindo II

The ejector pump has two main components, namely the electro-motor part and the mechanical part. The electro motor plays a vital role in the activity of draining sea water to the fresh water generator. The electro motor acts as a rotary driver in pump mechanics which has the working principle of converting electrical energy into mechanical energy. Control system and electro protection. The purpose of this research is to determine the cause of overload on a mechanical motor pump. The research was conducted by observation, namely direct observation of the pump which functions as an auxiliary machine. The results show that because the bearings experience excessive heat due to the connection at the center of the motor with the pump not being centered. Gland packing experiencing high speed events so that the shaft is difficult to rotate.

A Lumped Two-Compartment Model for Simulation of Ventricular Pump and Tissue Mechanics in Ischemic Heart Disease.

Introduction: Computational modeling of cardiac mechanics and hemodynamics in ischemic heart disease (IHD) is important for a better understanding of the complex relations between ischemia-induced heterogeneity of myocardial tissue properties, regional tissue mechanics, and hemodynamic pump function. We validated and applied a lumped two-compartment modeling approach for IHD integrated into the CircAdapt model of the human heart and circulation. Methods: Ischemic contractile dysfunction was simulated by subdividing a left ventricular (LV) wall segment into a hypothetical contractile and noncontractile compartment, and dysfunction severity was determined by the noncontractile volume fraction (). Myocardial stiffness was determined by the zero-passive stress length ( and nonlinearity () of the passive stress-sarcomere length relation of the noncontractile compartment. Simulated end-systolic pressure volume relations (ESPVRs) for 20% acute ischemia were qualitatively compared between a two- and one-compartment simulation, and parameters of the two-compartment model were tuned to previously published canine data of regional myocardial deformation during acute and prolonged ischemia and reperfusion. In six patients with myocardial infarction (MI), the was automatically estimated using the echocardiographic LV strain and volume measurements obtained acutely and 6 months after MI. Estimated segmental values at the baseline and 6-month follow-up were compared with percentage late gadolinium enhancement (LGE) at 6-month follow-up. Results: Simulation of 20% of shifted the ESPVR rightward while moderately reducing the slope, while a one-compartment simulation caused a leftward shift with severe reduction in the slope. Through tuning of the , , and , it was found that manipulation of the alone reproduced the deformation during acute ischemia and reperfusion, while additional manipulations of and were required to reproduce deformation during prolonged ischemia and reperfusion. Out of all segments with LGE>25% at the follow-up, the majority (68%) had higher estimated at the baseline than at the follow-up. Furthermore, the baseline correlated better with percentage LGE than did at the follow-up. Conclusion: We successfully used a two-compartment model for simulation of the ventricular pump and tissue mechanics in IHD. Patient-specific optimizations using regional myocardial deformation estimated the in a small cohort of MI patients in the acute and chronic phase after MI, while estimated values closely approximated the extent of the myocardial scar at the follow-up. In future studies, this approach can facilitate deformation imaging–based estimation of myocardial tissue properties in patients with cardiovascular diseases.

A Closed-Loop Modeling Framework for Cardiac-to-Coronary Coupling.

The mechanisms by which cardiac mechanics effect coronary perfusion (cardiac-to-coronary coupling) remain incompletely understood. Several coronary models have been proposed to deepen our understanding of coronary hemodynamics, but possibilities for in-depth studies on cardiac-to-coronary coupling are limited as mechanical properties like myocardial stress and strain are most often neglected. To overcome this limitation, a mathematical model of coronary mechanics and hemodynamics was implemented in the previously published multi-scale CircAdapt model of the closed-loop cardiovascular system. The coronary model consisted of a relatively simple one-dimensional network of the major conduit arteries and veins as well as a lumped parameter model with three transmural layers for the microcirculation. Intramyocardial pressure was assumed to arise from transmission of ventricular cavity pressure into the myocardial wall as well as myocardial stiffness, based on global pump mechanics and local myofiber mechanics. Model-predicted waveforms of global epicardial flow velocity, as well as of intramyocardial flow and diameter were qualitatively and quantitatively compared with reported data. Versatility of the model was demonstrated in a case study of aortic valve stenosis. The reference simulation correctly described the phasic pattern of coronary flow velocity, arterial flow impediment, and intramyocardial differences in coronary flow and diameter. Predicted retrograde flow during early systole in aortic valve stenosis was in agreement with measurements obtained in patients. In conclusion, we presented a powerful multi-scale modeling framework that enables realistic simulation of coronary mechanics and hemodynamics. This modeling framework can be used as a research platform for in-depth studies of cardiac-to-coronary coupling, enabling study of the effect of abnormal myocardial tissue properties on coronary hemodynamics.

Invited Commentary

Left ventricular assist devices (LVADs) continue to be an important therapy for patients with end-stage heart failure. While survival with a LVAD is superior to medical therapy alone, device-related complications are unfortunately common. Nonsurgical bleeding is a particularly serious challenge, as it negatively affects a large percentage of patients receiving LVAD therapy. This phenomenon is thought, in part, to result from the mechanical interface of the device with patient blood. Supraphysiologic shear stress is notable in the newer generation of nonpulsatile LVADs and can induce degradation of important clotting factors, including von Willebrand Factor (vWF). In this article, the authors [1Bartoli C.R. Kang J. Zhang D. et al.Left ventricular assist device design reduces von Willebrand factor degradation: a comparative study between the HeartMate II and the EVAHEART left ventricular assist system.Ann Thorac Surg. 2017; 103: 1239-1245Abstract Full Text Full Text PDF PubMed Scopus (36) Google Scholar] use a mock circulatory loop to compare two devices: the axial flow HeartMate II and the centrifugal pump EVAHEART LVAS. Whole blood was run through each of the mock loops, and levels of vWF and its degradation products were measured at 6-hour intervals. This study found a significant increase in the breakdown of vWF with the axial flow device compared with the centrifugal pump. While they acknowledge that other design features might affect their results, the authors attribute less breakdown of vWF with the centrifugal pump to the relatively larger blood gaps and lower revolutions per minute associated with the device. This study is an important demonstration of how pump mechanics can dramatically affect the components of circulating blood. The bench model does not account for endothelial function or other physiologic parameters found in vivo. However, the purity of design enables researchers to examine directly how a change in pump properties can help to minimize blood trauma. Ultimately, more patients are now living longer with mechanical circulatory support. To minimize device-related complications, such as nonsurgical bleeding, it is important to understand the effects of design features. Studies such as these will help to inform the next generation of devices. Left Ventricular Assist Device Design Reduces von Willebrand Factor Degradation: A Comparative Study Between the HeartMate II and the EVAHEART Left Ventricular Assist SystemThe Annals of Thoracic SurgeryVol. 103Issue 4PreviewSupraphysiologic shear stress from continuous-flow left ventricular assist devices (LVADs) accelerates von Willebrand factor (vWF) degradation and predisposes patients to nonsurgical bleeding. It is unknown whether unique design characteristics of LVADs differentially affect vWF degradation. We tested the hypothesis that the centrifugal-flow EVAHEART (Evaheart, Houston, TX) left ventricular assist system (LVAS), which was designed to minimize shear stress (low operational revolutions per minute [rpm], larger flow gaps, low shear stress, flat H-Q curve), reduced vWF degradation versus the axial-flow HeartMate II (Thoratec, Pleasanton, CA) LVAD. Full-Text PDF

Patterns of Mechanical Inefficiency in Pediatric Dilated Cardiomyopathy and Their Relation to Left Ventricular Function and Clinical Outcomes

Pediatric dilated cardiomyopathy (DCM) is associated with death or transplantation and is typically considered a homogeneous process affecting global left ventricular (LV) function. However, assessment of regional abnormalities that contribute to pumping inefficiencies is lacking. The aim of this study was to define regional strain patterns of mechanical inefficiency in the broader context of LV discoordination (dysfunction and timing abnormalities) and to evaluate their associations with LV function and clinical outcomes. Multiplanar apical LV echocardiographic images from patients with pediatric DCM (n=56) and control subjects (n=20) were analyzed by two-dimensional longitudinal speckle-tracking strain analysis to identify segmental strain patterns and global contraction groups. Clinical outcome (death or transplantation vs transplantation-free survival) and echocardiographic data were evaluated. Outcome groups were compared using the Fisher exact test, the χ(2) test, or analysis of variance (with P values≤.05 considered to indicate statistical significance). Of 56 patients with DCM, 29 (52%) progressed to death or transplantation. Five segmental strain patterns were observed that were used to define seven contraction groups by regional contractility and/or timing discoordination. The group(s) with the most discoordination had the most LV dysfunction (P=.0004) and a trend toward the highest frequency of death or transplantation (P=.069). Interreader reproducibility of segmental strain patterns agreed in 165 or 180 (92%) segments tested (κ=0.90). Control subjects had normal strain patterns. A heterogeneous mixture of abnormalities in the regional wall mechanics that lead to inefficient pump mechanics through functional and timing abnormalities were seen in this cohort and were categorized into natural subgroups. More severe LV discoordination was associated with increased LV dysfunction and a trend toward death or transplantation.

Quantifying saphenous reflux.

Quantification of reflux is desirable in advanced chronic venous disease as clinical features are based on its adverse impact on ambulatory venous pressure (AMVP). Prior clinical observation suggests that reflux in a saphenous vein > 5 mm is likely significant. On the basis of normal calf pump mechanics, we hypothesized that a reflux volume ≥ 30 mL was necessary to upset pump equilibrium. Venous laboratory data in 119 limbs with isolated saphenous reflux were analyzed. Reflux volume was calculated by duplex ultrasound (area × velocity × duration). The relationship of reflux volume to saphenous size, calf pump function (air plethysmography, AMVP), flow resistance (Poiseuille equation), and clinical severity were examined. Saphenous size had a bimodal relationship to reflux volume. Reflux volume of ≥ 30 mL occurred mostly (97% of limbs) with saphenous size of ≥ 5.5 mm, but 51% of saphenous veins >5.5 mm had reflux volumes <30 mL. This is because saphenous veins invariably carried less than their maximum reflux potential indicated by their size (Poiseuille equation). Variable additional focal resistance across refluxive valve cusps and narrower re-entry perforators is not taken into account when only saphenous truncal size is used for resistance calculation. Furthermore, the association of AMVP with reflux was found not to be based on a set (≥ 30 mL) threshold but was variable, depending on existing calf pump mechanics, compensatory in some (12% of limbs) and aggravating reflux effects in others (26%). Calf pump abnormalities were found in 70% of refluxive limbs and in 44% (n = 16) of contralateral limbs without any reflux. Reflux volume was significantly higher overall in limbs with ulcer (C6), but the range overlapped with lesser clinical classes. Seven of 14 limbs with active ulcers had reflux volume >30 mL; six of seven limbs with active ulcers and reflux volume of <30 mL had calf pump abnormalities that would be poorly tolerant of reflux even at these smaller volumes. Saphenous size alone cannot be used as an indicator of significant reflux. More than two thirds of the limbs with isolated saphenous reflux have calf pump abnormalities, which also occurred without reflux in the opposite limb--a novel finding. This means that in addition to quantification of reflux volume, calf pump assessment such as with air plethysmography and AMVP is desirable in clinical classes 3 and higher for proper assessment.

Axial and centrifugal continuous-flow rotary pumps: A translation from pump mechanics to clinical practice

The recent success of continuous-flow circulatory support devices has led to the growing acceptance of these devices as a viable therapeutic option for end-stage heart failure patients who are not responsive to current pharmacologic and electrophysiologic therapies. This article defines and clarifies the major classification of these pumps as axial or centrifugal continuous-flow devices by discussing the difference in their inherent mechanics and describing how these features translate clinically to pump selection and patient management issues. Axial vs centrifugal pump and bearing design, theory of operation, hydrodynamic performance, and current vs flow relationships are discussed. A review of axial vs centrifugal physiology, pre-load and after-load sensitivity, flow pulsatility, and issues related to automatic physiologic control and suction prevention algorithms is offered. Reliability and biocompatibility of the two types of pumps are reviewed from the perspectives of mechanical wear, implant life, hemolysis, and pump deposition. Finally, a glimpse into the future of continuous-flow technologies is presented.

District hand pump mechanics associations in Uganda for improved operation and maintenance of rural water-supply systems

In Uganda, functionality is still a challenge, with 19 per cent of water points not working. Though trained by local government and NGOs, hand pump mechanics (HPMs) are not recognized as local private sector players and are mostly segregated individuals, yet they are a key stakeholder in operation and maintenance (O&M) of rural water supply. HPMs find it hard to access spare parts and cannot benefit from economies of scale; nor are they involved in decision making in water source development and rehabilitation and cannot receive any formal government contracts for rehabilitation. This situation has resulted in a lack of adequate information around operation and maintenance such as costs, functionality, and consumer feedback loops. At community level, there are reported cases of difficulties to access reliable repairs with uniform prices. This evidence-based paper explores how mechanics have contributed to sustaining the flow of water through district-based HPMs associations in five districts in Uganda.

Is intrathoracic pressure regulation at the threshold of new resuscitation science?*

Is intrathoracic pressure regulation at the threshold of new resuscitation science?*

Right ventricular free wall pacing improves cardiac pump function in severe pulmonary arterial hypertension: a computer simulation analysis

In pulmonary arterial hypertension (PAH), duration of myofiber shortening is prolonged in the right ventricular (RV) free wall (RVfw) compared with that in the interventricular septum and left ventricular free wall. This interventricular mechanical asynchrony eventually leads to right heart failure. We investigated by computer simulation whether, in PAH, early RVfw pacing may improve interventricular mechanical synchrony and, hence, cardiac pump function. A mathematical model of the human heart and circulation was used to simulate left ventricular and RV pump mechanics and myofiber mechanics. First, we simulated cardiovascular mechanics of a healthy adult at rest. Size and mass of heart and blood vessels were adapted so that mechanical tissue load was normalized. Second, compensated PAH was simulated by increasing mean pulmonary artery pressure to 32 mmHg while applying load adaptation. Third, decompensated PAH was simulated by increasing mean pulmonary artery pressure further to 79 mmHg without further adaptation. Finally, early RVfw pacing was simulated in severely decompensated PAH. Time courses of circumferential strain in the ventricular walls as simulated were similar to the ones measured in healthy subjects (uniform strain patterns) and in PAH patients (prolonged RVfw shortening). When simulating pacing in decompensated PAH, RV pump function was best upon 40-ms RVfw preexcitation, as evidenced by maximal decrease of RV end-diastolic volume, reduced RVfw myofiber work, and most homogeneous distribution of workload over the ventricular walls. Thus our simulations indicate that, in decompensated PAH, RVfw pacing may improve RV pump function and may homogenize workload over the ventricular walls.

Three-Wall Segment (TriSeg) Model Describing Mechanics and Hemodynamics of Ventricular Interaction

A mathematical model (TriSeg model) of ventricular mechanics incorporating mechanical interaction of the left and right ventricular free walls and the interventricular septum is presented. Global left and right ventricular pump mechanics were related to representative myofiber mechanics in the three ventricular walls, satisfying the principle of conservation of energy. The walls were mechanically coupled satisfying tensile force equilibrium in the junction. Wall sizes and masses were rendered by adaptation to normalize mechanical myofiber load to physiological standard levels. The TriSeg model was implemented in the previously published lumped closed-loop CircAdapt model of heart and circulation. Simulation results of cardiac mechanics and hemodynamics during normal ventricular loading, acute pulmonary hypertension, and chronic pulmonary hypertension (including load adaptation) agreed with clinical data as obtained in healthy volunteers and pulmonary hypertension patients. In chronic pulmonary hypertension, the model predicted right ventricular free wall hypertrophy, increased systolic pulmonary flow acceleration, and increased right ventricular isovolumic contraction and relaxation times. Furthermore, septal curvature decreased linearly with its transmural pressure difference. In conclusion, the TriSeg model enables realistic simulation of ventricular mechanics including interaction between left and right ventricular pump mechanics, dynamics of septal geometry, and myofiber mechanics in the three ventricular walls.

On the resonance of a pliant tube as a mechanism for valveless pumping

Valveless pumping can be achieved through the periodic compression of a pliant tube asymmetrically from its interfaces to different tubing or reservoirs. A mismatch of characteristic impedance between the flow channels is necessary for creating wave reflection sites. Previous experimental studies of the behaviour of such a pump were continued in order to demonstrate the wave mechanics necessary for the build-up of pressure and net flow. Specific measurements of the transient and resonant properties were used to relate the bulk responses to the pump mechanics. Ultrasound imaging through the tube wall allowed visualization of the wall motion concurrently with pressure and flow measurements. For analysis, a one-dimensional wave model was constructed which predicted many of the characteristics exhibited by the experiments.

Lymph pump mechanics in the rabbit hind leg.

The mechanisms that govern fluid uptake by the initial lymphatics and adjustment of lymph flow rates remain to a large degree uncertain. The aim of this study was to examine how passive tissue movement contributes to lymph flow rates. Lymph fluid was collected via a cannula inserted into one of the popliteal prenodal lymphatics in the rabbit hind leg. Lymph flow rates were measured during periodic whole leg rotation and controlled oscillatory massage of the dorsal skin of the foot. Without whole leg rotation, lymph flow remained at low values (< 0.01 ml/h). Introduction of whole leg passive rotation caused a frequency-dependent increase in lymph flow rates, which were increased linearly with the log of frequency between 0.03 and 1.0 Hz. Local skin massage in the region of the initial lymphatics also led to a similar increase of lymph flow rates dependent on frequency as well as amplitude of skin displacement. Lymph flow rates during local skin massage reached a comparable order of magnitude regardless of whether the animal was alive or the heart had been arrested, suggesting that local lymph flow rates can be adjusted by periodic tissue motion independently of capillary fluid filtration pressures. The results indicate that periodic expansion and compression of initial lymphatics provide a mechanism for lymph pumping.

Gasoline pump mechanics had increased frequencies and sizes of micronuclei in lymphocytes stimulated by pokeweed mitogen

Fifteen gasoline pump mechanics and 15 controls were investigated with the lymphocyte micronucleus assay and also with differential count of leukocytes in the peripheral blood. The lymphocytes were stimulated with phytohemagglutinin and pokeweed mitogen in parallel cultures. The pump mechanics had increased frequencies and sizes of micronuclei in the pokeweed mitogen-stimulated cultures but not in those stimulated with phytohemagglutinin. The difference in effect between the 2 mitogens is probably due to an increased sensitivity of the B-lymphocytes to mutagens. The leukocyte count was significantly higher in the gasoline-exposed group. The effect of the occupational exposure was probably caused by the benzene content of the gasoline. The time-weighted average for 8 h was around 1 mg/m 3 of benzene, but there were peak levels of 20 mg/m 3.

Analysis of in situ heart mechanics.

Analysis of the in situ heart performance has been guided by the concepts of pump and muscle mechanics derived from studies on isolated heart and papillary muscle, respectively. It is occasionally beneficial to evaluate the cardiac performance separately on heart as a pump or as a muscle. Cardiac output is determined by the interaction among preload, afterload and contractility. Thus, it is sometimes difficult to estimate the contractile state of the diseased heart simply from hemodynamic measurements. Therefore, it is necessary to compare hemodynamics between rest and stress states or to apply concepts of "afterload mismatch and preload reserve" as well as end-systolic pressure volume relations in quantitative evaluation of the cardiac performance. Regional wall motion measurements are also useful to detect regional myocardial ischemia.