Protective Layer Research Articles

Application of MgO/ZrO2 coating on 309 stainless steel to increase resistance to corrosion at high temperatures and oxidation by an electrochemical method

Abstract 309 stainless steel is one of the steels that have the highest resistance to corrosion and thermal oxidation compared to other steel grades, but it should not be used at temperatures higher than 980°C if there are temperature fluctuations. Additionally, 309 stainless steel is not designed for use in wet environments and has the least corrosion resistance. This study aims to cover 309 stainless steel with MgO/ZrO2 particles using a two-step electroplating deposition method and then sintering to increase its resistance to wet corrosion and oxidation in temperature fluctuations. The intermediate ZrO2 coating makes the outer MgO layer about two times thicker and reduces the corrosion current density. The morphology of the coatings was determined using scanning electron microscopy and X-ray diffraction, and oxidation resistance was determined using cyclic oxidation tests and the wet corrosion test of the corrosion solution. 3.5% NaCl was used. The results showed that the coated samples, due to the use of TiO2 middle layer and MgO protective layer in the electrochemical method, have a 2-fold increase in wet corrosion and an increase in hardness of about 77%, as well as an increase in oxidation resistance of 1.8% compared to the sample without coating. Also, the reason for using the electrochemical deposition method is for better surface smoothness and less porosity of the coating as well as its use on all metals compared to thermal spray methods.

Current status, challenges and prospects of antifouling materials for oncology applications

Targeted therapy has become crucial to modern translational science, offering a remedy to conventional drug delivery challenges. Conventional drug delivery systems encountered challenges related to solubility, prolonged release, and inadequate drug penetration at the target region, such as a tumor. Several formulations, such as liposomes, polymers, and dendrimers, have been successful in advancing to clinical trials with the goal of improving the drug’s pharmacokinetics and biodistribution. Various stealth coatings, including hydrophilic polymers such as PEG, chitosan, and polyacrylamides, can form a protective layer over nanoparticles, preventing aggregation, opsonization, and immune system detection. As a result, they are classified under the Generally Recognized as Safe (GRAS) category. Serum, a biological sample, has a complex composition. Non-specific adsorption of chemicals onto an electrode can lead to fouling, impacting the sensitivity and accuracy of focused diagnostics and therapies. Various anti-fouling materials and procedures have been developed to minimize the impact of fouling on specific diagnoses and therapies, leading to significant advancements in recent decades. This study provides a detailed analysis of current methodologies using surface modifications that leverage the antifouling properties of polymers, peptides, proteins, and cell membranes for advanced targeted diagnostics and therapy in cancer treatment. In conclusion, we examine the significant obstacles encountered by present technologies and the possible avenues for future study and development.

Milk fat globule membrane (MFGM) phospholipid - Whey protein interaction characterization and its effect on physicochemical, interfacial properties and evaluation of in vitro digestion of emulsions - Inspired by the MFGM

The interfacial composition of fat globules can change the interfacial structure and further affect the digestive characteristics. In this study, the interaction between whey protein (WP), which is the main protein added in infant formula (IF), and milk fat globule membrane phospholipid (MPL) was investigated from the perspective of simulated fat globule structure, we further characterized the physicochemical properties and the in vitro digestive performance of the emulsions. The results showed that the interaction between MPL and WP changed the secondary and tertiary structures of WP, and formed a dense protective layer at the interface of the fat globule with strong interaction, which improved the emulsification property and physical stability of the emulsion. When MPL: WP was 5:10, the emulsions showed smaller particle size, higher absolute value of zeta-potential and more uniform and stable emulsion state. In addition, during the simulated in vitro digestion of infants, the degree of lipolysis and free fatty acid release content were significantly increased, which improved the fat digestion.

Revealing the origin of enhanced structural stability for nickel-rich LiNi0.83Co0.11Mn0.06O2 cathodes in situ modified with multifunctional polysiloxane

Multifunctional polysiloxane (MPS) layer is elaborately constructed on the surface of LiNi0.83Co0.11Mn0.06O2 (NCM83) particles via in situ hydrolysis-polycondensation of tetraethyl orthosilicate. Impressively, optimal NCM83 (NCM83-2) electrode covered with average 7 nm-thickness of fresh MPS layer delivers improved capacity retention ratio of 81.8 % after 150 cycles at 25 °C and retains the value of 78.7 % after 200 cycles at 60 °C and 1.0 C. Moreover, NCM83-2 electrode presents lower polarization degree with sluggish growth of the capacity platform. The significant advantages of NCM83-2 can be interpreted by the fact that the MPS layer effectively mitigates microcracks generation by inhibiting phase transition and lattice oxygen loss. Moreover, the MPS protective layer suppresses the thickening of cathode electrolyte interphase film and boosts the structural stability of NCM83 electrode to optimize electrochemical properties. Therefore, this strategy may provide promising enlightenments for preserving structural integrity and improving interfacial stability of nickel-rich cathodes for lithium-ion batteries.

A Virus-Inspired Inhalable Liponanogel Induces Potent Antitumor Immunity and Regression in Metastatic Lung Tumors.

Pulmonary delivery of immunostimulatory agents such as poly(I:C) to activate double-stranded RNA sensors MDA5 and RIG-I within lung-resident antigen-presenting cells is a potential strategy to enhance antitumor immunity by promoting type I interferon secretion. However, following pulmonary delivery, poly(I:C) suffers from rapid degradation and poor endosomal escape, thus limiting its potency. Inspired by the structure of a virus that utilizes internal viral proteins to tune the loading and cytosolic delivery of viral nucleic acids, we developed a liponanogel (LNG)-based platform to overcome the delivery challenges of poly(I:C). The LNG consisted of an anionic polymer hyaluronic acid-based nanogel core coated by a lipid shell, which served as a protective layer to stabilize the nanogel core in the lungs. The nanogel core was protonated within acidic endosomes to enhance the endosomal membrane permeability and cytosolic delivery of poly(I:C). After pulmonary delivery, LNG-poly(I:C) induced 13.7-fold more IFNβ than poly(I:C) alone and 2-fold more than poly(I:C) loaded in the state-of-art lipid nanoparticles (LNP-poly(I:C)). Moreover, LNG-poly(I:C) induced more potent CD8+ T cell immunity and stronger therapeutic effects than LNP-poly(I:C). The combination of LNG-poly(I:C) and PD-L1 targeting led to regression of established lung metastases. Due to the ease of manufacturing and the high biocompatibility of LNG, pulmonary delivery of LNG may be broadly applicable to the treatment of different lung tumors and may spur the development of innovative strategies for cancer immunotherapy.

An Improved Synchrosqueezing S-Transform and Its Application in a GPR Detection Task

The S-transform is a fundamental time–frequency (T-F) domain analysis method in ground penetrating radar (GPR) data processing and can be used for identifying targets, denoising, extracting thin layers, and high-resolution imaging. However, the S-transform spectrum experiences energy leakage near the instantaneous frequency. This phenomenon causes frequency components to erroneously spread over a wider range, impacting the accuracy and precision of GPR data processing. Synchrosqueezing is an effective method to prevent spectrum leakage. In this work, we introduce the synchrosqueezing generalized phase-shifting S-transform (SS-GPST). Initially, it resolves the compatibility issue between the S-transform and the synchrosqueezing strategy through phase-shifting. Subsequently, the SS-GPST accomplishes spectral energy focusing and resolution enhancement via a generalized parameter and synchrosqueezing. A synthetic signal test shows that the SS-GPST excels over other methods at focusing degree, spectral resolution, and signal reconstruction accuracy and speed. In actual GPR tunnel detection data processing, we assess the adaptability of the SS-GPST from three aspects: spectral energy distribution, thin layer identification, and data denoising. The results indicate: (1) compared to other methods, the SS-GPST accurately expresses spectral components with a strong focusing degree and fewer interference components; (2) high-frequency slices of the SS-GPST accurately detect the top and bottom interfaces of a 3.0–3.5 cm reinforcement protection layer; and (3) due to fewer interference components in the SS-GPST spectrum, reconstructing GPR profiles through the SS-GPST inverse transform is an efficient denoising technique. The SS-GPST demonstrates adaptability to different data processing purposes, offers high-resolution T-F spectra, and shows potential to supersede the S-transform.

Geophysical and physicochemical assessment of groundwater and the implication on the public health in rural and semi-urban areas of Northern Nigeria

Groundwater resource plays a central role in every sector of life globally. Unfortunately, the roles of groundwater are often unappreciated in many parts of the world, especially in developing nations. The paper applied a combined geo-electrical method and hydrochemical analysis alongside physical surveys to investigate aquifer promising zones, the quality and the source of water supply in the selected regions. The geo-electric resistivity data were used to select the most aquifer-promising zone for groundwater development with a key interest in groundwater potential and aquifer overburden protective capacity overlying the water-bearing unit. Seventeen (17) vertical electrical sounding (VES) acquired in four regions reveals that the regional weathered/fractured unit which constitutes the aquifer unity extends from 13.4 m to 41.3 m in depth with the subsurface resistivity value varying between 53 Ωm–1013 Ωm in terms of resistivity values. The overburdened thickness (protective soil layers) stretches from 2.5 m to 13 m with a resistive layer of resistivity values ranging from 111 Ωm to 2877 Ωm, which could provide high aquifer protective cover for the regional groundwater systems. The computed aquifer transmissivity and hydraulic conductivity range from 0.54 m2/h\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${m}^{2}/h$$\\end{document}–15.85 m2/h\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${m}^{2}/h$$\\end{document}, and 0.95 m/day–9.19 m/day, respectively. The estimated average longitudinal conductance (0.2 moh) reveals that the regional groundwater systems are moderately protective against surface contaminants. In addition, the physicochemical water analysis was examined, which exposes the level of heavy metals (HMs) compositions in the regional groundwater systems and the possible public health risks compared to WHO permissible drinking water limits. The sample water from the Rivers had the highest concentration of HMs (0.089 mg/I–2.012 mg/l), followed by the hand-dug wells (HWDs) (0.033 mg/l–1.555 mg/l) and the lowest in the borehole (0.011 mg/l–0.511 mg/l). In contrast, the borehole water sample shows a moderation where the HMs presence falls within the WHO standard for drinking water. The outcomes of the study show that 63% of the investigated region consumed water with a high concentration of HMs above the WHO permissible standard allowance for drinking water, while only 37% took water that falls within the WHO permissible standard. In conclusion, the study showed significant impacts of anthropogenic activities on the regional water quality, which provides vital information about the regional groundwater systems and the quality of water supply for adequate groundwater development and sustainability.

Analisis Of Upgrading Low-Crested Structures As An Adaptation Measure To Climate Change For Coastal Protection: A Hybrid Approach

Coastal zones have consistently been among the most appealing settlement areas due to their proximity to the sea, rich natural resources, and the high quality of life they offer (Lamberti et al., 2005). However, these regions are affected by climate change impacts, such as sea-level rise, storm surges, and an increased intensity of extreme weather events (Burcharth et al., 2014). Traditional low-crested rubble mound breakwaters are commonly used to protect coastal areas from wave damage. However, it is expected that the variability of climate conditions will induce a loss of functionality and structural integrity in the coming decades. Coastal communities and coastal managers, within the framework of sustainable development, are demanding new approaches that include not only the preservation of the hydraulic performance of the breakwaters, but also other factors, including social and environmental impacts. These requests significantly affect the traditional way to conceive those structures to be integrated into the coastal landscape. To cope with the variation of climate drivers, existing low-crested breakwaters must be adapted to accommodate social demands and environmental issues. Therefore, upgrading and maintaining the existing rubble-mound breakwater is a hot topic in coastal engineering, and deserves special attention due to the possible intensification of external loads resulting from the impacts of climate change (Stagnitti et al., 2023). Upgrading can be done by modifying the structure profile and/or adding structure elements (Burcharth et al., 2014). In 2011, Cappietti provided curves for the functional design of submerged breakwaters to be used in place of preexisting emergent breakwaters. Burcharth et al. (2014) explained that the best way to improve the structure is to put an additional layer of protection on the front slope, as long as the foreshore has a mild slope of around 1:100. But if the foreshore becomes steeper because of erosion, then a front berm will also be needed. Stagnitti et al. (2022) introduced a novel methodology based on the calculation of the failure probability during a lifetime due to independent failure modes. Their method was employed to evaluate the performance of upgraded breakwaters in response to climate change. Estimating the wave overtopping of both existing and upgraded breakwaters is essential for designing upgrade options that can ensure the safety of port operations. Stagnitti et al. (2023) applied the numerical model IH2VOF, which was calibrated using experimental data, to study the wave overtopping of damaged and upgraded rubble-mound breakwaters. The present work examines the feasibility of converting emerged rubble-mound breakwaters into submerged breakwaters to minimize their detrimental environmental effects. To achieve this goal, an investigation was conducted to evaluate the hydraulic performance of submerged breakwaters that are created by lowering the crest of existing emerged breakwaters. Additionally, two-dimensional numerical simulations were performed using IH2VOF to investigate wave interactions with the structures.

Using Silica Aerogel Layers for the Stabilization of Zn Metal Anodes in Zn‐Ion Batteries

AbstractAqueous zinc ion batteries have the advantages of low cost, high safety, high theoretical specific capacity. However, the charging and discharging process is usually accompanied by side reactions such as dendrite growth, hydrogenolysis, corrosion of electrodes, passivation, etc., which limits the development and application. In this work, the zinc anode is modified by constructing a silica aerogel layer with ultra‐high specific surface area and abundant polar functional groups (−OH, −COOH, −CH3), which not only provides abundant active sites for the uniform deposition of zinc ions, but also construct an artificial protective layer that acting as a desolvation layer and a zinc ion flux regulator. Consequently, the altered zinc anode exhibits an extremely durable zincophilic characteristic and a declining interfacial impedance. The constructed artificial layer can prevent side reactions and promote uniform zinc ion deposition to prevent the generation of zinc dendrites during the charge/discharge process. Results show that the symmetric cells composed of modified Zn anodes can be stably cycled for more than 1100 h at 0.5 mA cm−2 and 0.5 mAh cm−2, which is much higher than that of bare Zn. In addition, the life and capacity retention of the Zn/MnO2 full cells were also significantly improved.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long‐lasting Zinc Metal Batteries

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL‐regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long‐lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N‐dimethyl‐1H‐imidazole‐1‐sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O‐induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de‐solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8·1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high‐performance zinc metal batteries.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-lasting Zinc Metal Batteries.

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8·1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

Robust ZTO-reinforced Ag nanowire hybrid transparent conductive thin films with absorption-enhanced electromagnetic interference shielding property

Technological advances have accelerated the pursuit of transparent conducting thin films (TCFs) with superior mechanical properties, durability, efficient optoelectrical performance and substrate compatibility as a pivotal focus in the realm of flexible transparent electronics. Against this background, this work investigates the fabrication of multilayer silver nanowire (AgNW) thin films reinforced by zinc tin oxide (ZTO) thin film encapsulation on polycarbonate substrates by a combination of sputtering and spin-coating techniques. An investigation of the influence of AgNW percolation networks on the optoelectrical properties of ZTO/AgNW/ZTO hybrid thin films was carried out. The impact of ZTO protective layers on the enhancement of electrical properties, adhesivity, flexibility and environmental stability of the multilayer TCF was elucidated. Additionally, to explore the compatibility of the fabricated TCF in integrated device and stealth applications, its electromagnetic interference shielding properties were investigated. The hybrid TCF showed 99.47% EMI shielding efficiency with an absorption-dominant EMI shielding effectiveness of 22.7 dB in the x-band region.

Acetyl-CoA Carboxylase1 Influences ECERIFERUM2 Activity to Mediate the Synthesis of Very-Long-Chain Fatty Acid Past C28.

Cuticular wax is a protective layer on the aerial surfaces of land plants. In Arabidopsis (Arabidopsis thaliana), cuticular wax is mainly constituted of compounds derived from very-long-chain fatty acids (VLCFAs) with chain lengths longer than C28. CER2-LIKE (ECERIFERUM2-LIKE) proteins interact with CER6/KCS6 (ECERIFERUM6/β-Ketoacyl-CoA Synthase6), the key enzyme of the fatty acid elongase complex, to modify its substrate specificity for VLCFA elongation past C28. However, the molecular regulatory mechanism of CER2-LIKE proteins remains unclear. Arabidopsis eceriferum19 (cer19) mutants display wax-deficient stems caused by loss of waxes longer than C28, indicating that CER19 may participate in the CER2-LIKE-mediated VLCFA elongation past C28. Using positional cloning and genetic complementation, we showed that CER19 encodes Acetyl-CoA Carboxylase1 (ACC1), which catalyzes the synthesis of malonyl-CoA, the essential substrate for the CER6/KCS6-mediated condensation reaction in VLCFA synthesis. We demonstrated that ACC1 physically interacts with CER2-LIKE proteins via split-ubiquitin yeast two-hybrid (SUY2H) and firefly luciferase complementation imaging (LCI) analysis. Additionally, heterologous expression in yeast and genetic analysis in Arabidopsis revealed that ACC1 affects CER2 activity to influence VLCFA elongation past C28. These findings imply that CER2-LIKE proteins might function as a link between ACC1 and CER6/KCS6 and subsequently enhance CER6/KCS6 binding to malonyl-CoA for further utilization in VLCFA elongation past C28. This information deepens our understanding of the complex mechanism of cuticular wax biosynthesis.

Multi‐Wavelength Metasurface Empowered Cryptography for Heightened Security and Improved Fidelity

AbstractInformation security holds paramount importance in the contemporary information society. Here, a novel cryptography method is proposed based on the multi‐wavelength complex‐amplitude metasurface, which can achieve a high security level by generating a frequency‐selective key as an additional layer of protection. Moreover, the quality of the decrypted holographic images can be significantly improved by employing the complex‐amplitude encoding method and the modified visual secret sharing scheme, which adopts a new superposition operator to prevent fidelity loss. As a proof‐of‐concept demonstration, a prototype metasurface sample is designed, fabricated, and characterized, where the measured results agree very well with the numerical ones and the design goals. The proposed method can reinforce security level and improve fidelity of the decrypted message, rendering it appealing for applications in communication and anti‐counterfeiting.

Composition-driven superior CMAS corrosion resistance of high-entropy rare-earth disilicates

Achieving superior calcium-magnesium-aluminosilicate (CMAS) corrosion resistance in high-entropy rare-earth disilicates (HEREDs) is crucial to their applications as environmental barrier coatings in aerospace. Stimulated by the vast compositional field of HEREDs, we achieve exceptional CMAS corrosion resistance in HEREDs at elevated temperatures via a composition-driven strategy for the first time. Specifically, the equimolar 3- to 8-cation high-entropy rare-earth disilicate (3–8HERED) samples are first successfully designed and fabricated using a high-throughput pressure-less sintering technique and then their CMAS corrosion resistance up to 1773 K is evaluated. Among all the as-fabricated samples, the as-fabricated 7HERED samples are found to exhibit the best CMAS corrosion resistance. The outstanding CMAS corrosion resistance of the as-fabricated 7HERED samples is primarily attributed to pronounced sluggish diffusion induced by configurational entropy, with the synergistic effect of their chemical activity, which facilitates the formation of dense apatite protective layers. Our work provides valuable ways to design remarkable anti-CMAS corrosion high-entropy ceramics.

Combination of carboxymethylcellulose and wood hemicelluloses to enhance encapsulation efficiency and microcapsule wall thickness

Wood hemicelluloses have been used as a wall material for spray-dried microencapsulation of polyphenols. Nevertheless, their incomplete water solubility could negatively impact their encapsulation efficiency (EE) and the formation of a complete protective layer, which might be alleviated synergistically by combining them with carboxymethylcellulose (CMC). Here, we explored the effects of CMC addition (0.5–3.0 %, w/w of WM) on the capacity of galactoglucomannans (GGM) and glucuronoxylans (GX) to retain bioactive compounds of bilberry during spray drying; and its contribution to the formation of wall thickness. The results revealed that EE of GGM and GX increased by 4–8 % with the CMC addition at 0.5 %, but significantly declined at higher CMC concentrations. Adding CMC improved the microcapsules' antioxidant activities, surface smoothness, and solubility, but had no effect on their particle size, thermal properties, amorphous structure, or moisture content. The majority of the GGM and GX microcapsules had a hollow internal structure surrounded by continuous wall matrix with a thickness of about 2.3–2.6 μm, which increased to 3.1–3.5 μm with the addition of 0.5 % CMC. Therefore, using CMC at an optimized proportion as a co-encapsulant improved wood hemicelluloses' ability to protect bioactive compounds during spray drying and enhanced microcapsule wall formation.

Enhanced performance in lithium metal batteries: A dual-layer solid electrolyte interphase strategy via perfluoropolyether derivative additive

The utilization of metallic lithium at the negative electrode is regarded as the most promising approach to enhance the energy density of current lithium battery systems. However, uncontrolled lithium dendrite growth leading to instability and low coulombic efficiency (CE) hinders the practical application of metallic lithium as the negative electrode. This study unveils the synthesis of a perfluoropolyether (PFPE) derivative electrolyte additive, denoted as PPP, through reversible addition-fragmentation chain transfer (RAFT) polymerization involving 2-butylsulfanyl-thiocarbonylsulfanyl-propionic acid (PABTC), PFPE and polydioxolane acrylate (PDXLA) as precursors. This additive incorporates fluorinated segments to enhance lithium ion transport efficiency, along with organic segments to improve battery stability. It facilitates the formation of a distinctive dual-layered solid electrolyte interphase (SEI) in 1,3-dioxolane (DOL) based lithium metal batteries. The upper organic protective layer mitigates volume deformation and suppresses lithium dendrite growth, while the lower dense LiF layer enhances lithium ion transport rates, thus improving battery performance. The resulting dual-layer SEI structured LFP | DOL-PPP | Li cell exhibits a capacity retention of 94.1 % after 150 cycles. Moreover, the Li | DOL-PPP | Li cell demonstrates stable cycling performance exceeding 1800 h at 0.2 mA cm-2. This work underscores the significant potential of PFPE derivatives as electrolyte additives in the design and optimization of lithium batteries.

Empowering the Potassium-Sulfur Battery with Commendable Reaction Kinetics and Capacity Output by Localized High-Concentration Electrolytes.

Potassium-sulfur (K-S) batteries are one of the promising high-energy-density candidates beyond current lithium-ion batteries. Nevertheless, in practice, the utilization of K-S batteries is largely hindered due to the dissolution and shuttle effect of the cathode redox intermediates and the scarcity of an effective anode protection layer in conventional electrolytes. Herein, electrolyte engineering is applied to formulate an ether-based localized high-concentration electrolyte (LHCE) for the first time in a K-S cell with the mitigated parasitic effect of polysulfide dissolution and shuttle and the tuned anode-electrolyte interface property. A nonsolvating and polysulfide-stable fluoroether is sieved as a cosolvent in such an LHCE, which possesses the ultralow polysulfides solubility due to less roaming solvents and thus alleviates the polysulfides shuttle effect. The anion-derived solid electrolyte interphase enriched in inorganic components is constructed due to the strengthened cation-anion interplay in the primary solvation sheath and highlighted with accelerated interfacial kinetics in a K-S cell. It is validated that the proposed LHCE unlocks the theoretical capacity of the K-S cell based on the conversion between S and K2S3. It is further revealed that the lifespan is limited to the anode corrosion with severe cosolvent degradation caused by limited solvating solvent compatibility with metallic K, and the inevitable byproduct accumulation at the S cathode. The K-S cell based on the designed LHCE could achieve a prolonged lifespan with a reversible capacity of 448 mA h/gs after 80 cycles with an elaborate cathode design. This work shines a light on the electrolyte design perspective for full utilization and an in-depth mechanistic understanding of high-energy-density K-S batteries.

Influence of metal ions on cysteine as a corrosion inhibitor for low carbon steel in sulfuric acid: Polarization, EIS, XPS, and DFT analysis

This study examines the effectiveness of cysteine as an eco-friendly in inhibiting the corrosion of low-carbon steel in a sulfuric acid solution and the impact of adding various metal ions (Cu2+, Ni2+, and Co2+) to the media. All solutions were prepared using distilled water. The results show that 5 mM cysteine inhibits corrosion (IE = 65%), increasing to 93.5% in the presence of 4×10-5 M Cu2+ ions, but decreasing with the addition of Co2+ or Ni2+ ions. The inhibitive action of cysteine-Cu is the best one and that may be attributed to the formation of a protective coating on the metal surface, which prevents chemical reactions in an aggressive environment. Moreover, the DFT calculation found that the adsorption energy increased from −17.2 to −97.7 and −104.6 kcal/mol in the case of cysteine, Cysteine-Cu SAM, and Cysteine-Cu(II) Salt and the closest atom to the surface reduced from 2.576 to 2.128 and 2.146 Å which indicates Cysteine-Cu better adhere to the surface. SEM, XRD, and XPS were used to analyze the formation of the protective layer. This has the potential to develop new and more effective corrosion inhibitors for industrial applications.

The Effects of Irradiation on the Improvement in Oxidation Behavior of MX-ODS Steel in Liquid Pb.

Lead-cooled fast reactors exhibit strong inherent safety performance and good economic features, while material degradation due to corrosion and irradiation is still challenging. Oxide dispersion-strengthened steels are one of the promising candidates for fuel cladding materials. The effects of both irradiation and corrosion on ODS steel need to be further studied. In this work, MX-ODS steel was irradiated by Fe ions at 500 °C up to 46 dpa. Later, the as-received specimen and the irradiated specimen were used to conduct corrosion tests in oxygen-saturated Pb at 550 °C for 1 h. In the as-received specimen, discontinuous oxides penetrated by Pb and Pb in contact with steel matrix were observed, demonstrating unsatisfactory corrosion resistance of the material. However, in the irradiated specimen after corrosion experiment, a protective oxide layer formed and prevented Pb attack. The oxidation behavior differences between the two specimens can be attributed to the defects produced by irradiation and the structural discrepancy in oxides caused by the formation process. A possible mechanism of irradiation on the corrosion is discussed. In the as-received specimen, Fe atoms loss led to voids in the oxides, and lead penetrated the oxides through these voids. In the irradiated specimen, defects left by previous irradiation helped to form a more uniform oxide layer. The adhesive outer magnetite oxide and the Fe ions generated from where grain boundary oxidation developed retarded the presence of voids and made the oxide layer protective.