Variation Of Properties Research Articles

Tolerance to waterlogging determines the effectiveness of biodrainage in mitigating runoff in hillslope-scale simulations

Reversal of land degradation in agricultural systems through a wide range of natural resources management tailored to the specific climate, soil, and topography is crucial. This is especially critical for subsistence farming systems such as the Ethiopian Highlands, subject to some of the highest soil erosion rates in the world. Although biodrainage is widely and successfully used for waterlogging and erosion control in arid regions, it is not widely applied in sub-humid places like the Ethiopian Highlands. Beginning with field observations of the complex vertical soil profiles and variations in lithology and soil hydraulic properties along a hillslope ridge-channel transect in the Debre Mawi watershed of the Abay (Upper Blue Nile) Basin in the Ethiopian Highlands, we construct a synthetic model hillslope in HYRDUS-2D. For the growing season coinciding with the rainy season, known as Kiremt, we calibrated the hillslope water storage using observations of water table elevation. The synthetic hillslope is then used to test the feasibility of biodrainage to mitigate saturation, a major driver of gullying and soil loss in the area, and to identify plant traits to which such mitigation is sensitive. The simulation results using bare soil, eucalyptus and maize land covers revealed that in spite of low potential evapotranspiration during the Kiremt season, biodrainage with Eucalyptus can reduce the occurrence and duration of saturation of the top 0.6 m surface soil profile of the hillslope. Of the different plant traits explored, the maximum soil water potential at which the crop can transpire at potential rates, and the LAI, which controls potential evaporation rates via the crop coefficient, provide the most important controls on the effectiveness of biodrainage in desaturating the hillslope. We conclude that biodrainage strategies to mitigate soil erosion in sub humid locales merits further investigation through empirical trials. However, implementation of biodrainage strategies should be subject to thoughtful consideration of the implications for socio-economic outcomes and the local environment.

Effects of gamma radiation on cyclic olefin copolymers with varied norbornene content: Impacts on structure and properties at sterilization doses

Cyclic olefin copolymer (COC) is a transparent amorphous plastic known for its chemically inertness, biocompatibility, low density, and easy processability. These qualities have led to its widespread adoption in various cutting-edge applications, including the medical, packaging, optical and microelectronics. Radiation sterilization, utilizing high-energy irradiation, is a method for achieving highly effective sterilization of medical products. However, this process can induce changes in the color and properties of the COC materials. In order to comprehend the effects of ionizing radiation on COC, it is crucial to investigate the underlying reaction mechanisms. In this work, the effects of γ-ray irradiation on COC with different norbornene contents were examined. The finding revealed that tertiary alkyl radical content and the degree of oxidative degradation increased with an increase in norbornene content. Furthermore, the macroscopic properties experienced notable shifts, including decreased thermal stability, lower glass transition temperature and the change in color from colorless and transparent to yellow-green. Analysis of the melt index indicated a dominance of cross-linking phenomena with increased absorbed dose for COC with a norbornene content of 35%, while the melt flow rate steadily accelerated with the increase of absorbed dose for COC with norbornene content of 46%, 52% and 57%, leading to a predominant cracking behavior. The variation in tensile properties of the four COCs before and after irradiation were minimal, not exceeding 3%. Overall, this investigation sheds light on the intricate effects of ionizing radiation on COC and highlights the importance of understanding these mechanisms for practical applications.

A Methodology to Assess Directional and Spatial Variations of Tensile and Fracture Properties in Fabricated Nuclear Components

AbstractIn the present study, directional and spatial variations in the mechanical properties are calculated in two nuclear-grade materials. In practice, multiple ASTM standard specimens are tested to measure mechanical properties of any material. The variations obtained in the properties during the tests are generally neglected assuming such variations are due to experimental uncertainties. However, such variations may indicate some degree of anisotropy and spatial inhomogeneity in the material due to component fabrication. In the present study, multiple miniaturized tensile specimens are tested. These specimen materials are taken across the thickness and at different geometrical locations in the two manufactured nuclear-grade components. The experimental load versus displacement data of all the specimens are then used to evaluate stress-strain data and cohesive zone parameters. These parameters are determined for each tested specimen separately to gather variations over the geometries of the components. Subsequently, TPB specimens are analyzed employing these parameters to calculate variations in fracture initiation toughness over the geometry. The key findings of the present work include higher strengths in circumferential direction in comparison to the longitudinal direction for SA333 Gr6 steel. A new equation is developed to correlate the material toughness with the fracture toughness with a proportionality constant of 2.7778 for low-alloy carbon steels. The study showed that directional and spatial variations in Jini are less pronounced in 20MnMoNi55 compared to SA333Gr6 materials. This finding is crucial for safety analyses in nuclear components and indicates that this methodology can be applied more widely across different materials.

Effects of Aging on Rheological Properties and Microstructural Evolution of SBS Modified Asphalt and Crumb Rubber Modified Asphalt Binders

Focusing on the comparison of aging resistance between styrene-butadiene-styrene (SBS) modified asphalt (SBSMA) and crumb rubber modified asphalt binders (CRMA), the influences of aging on rheological properties and microstructural characteristics of different modified asphalts were investigated in this work. Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR) tests were carried out, and the variations in rheological properties for different modified asphalts after the rotating thin film oven test (RTFOT) were analyzed with the rutting factor aging index (RAI) and creep rate aging index (CAI). By using Fluorescence microscopy (FM) and Fourier transform infrared (FTIR) spectroscopy, the evolutions of microstructure and chemical composition for two modified asphalts were analyzed with carbonyl index growth rate (CIR) and sulfoxide index growth rate (SIR). Then, The relationships between CIR/SIR and RAI/CAI were established to show the correlation between the deterioration of macroscopic performance and the evolution of micro-structure. The results indicated that the aging degree of asphalt increases with elevated temperatures, leading to decreasing low-temperature performance while improving high-temperature performance. Nevertheless, SBSMA exhibited strong sensitivity to aging temperature. Under thermo-oxidative aging, the RAI and CAI of SBSMA were lower than those of CRMA, whereas the regularities of CIR and SIR were opposite, indicating that CRMA was superior to SBSMA in terms of anti-aging properties due to the rupture of the cross-linked network structure of SBSMA. However, CRMA experienced aging accompanied by full swelling, and thus, relatively minor performance declined. The CIR and SIR exhibited a better correlation with the RAI and CAI, illustrating that both CIR and SIR could characterize the aging degree of modified asphalts well.

Influence of Cyclic Heat Treatment Temperature on Microstructure and Mechanical Properties of 18Ni(C250) Maraging Steel.

Cyclic heat treatment is an effective approach for enhancing the mechanical properties of 18Ni(C250) maraging steel, and the selection of cyclic heat treatment temperature is a key factor. In this study, a cyclic heat treatment process with a two-step solution treatment is employed to investigate the influence of cyclic heat treatment temperature, specifically the first solution treatment temperature (920 °C, 950 °C, and 980 °C), on the microstructure and mechanical properties of 18Ni(C250) maraging steel. The results indicate that with an increase in the cyclic heat treatment temperature, the average grain size of the 18Ni(C250) maraging steel decreases initially and then increases. When the cyclic heat treatment temperature reaches 950 °C, the grain size is at its minimum, exhibiting optimal grain uniformity. Additionally, the increase in cyclic heat treatment temperature results in a reduction in the size of martensitic lath with the same orientation inside the grains, along with an increase in the relative quantity of low-angle grain boundaries. Furthermore, the volume fraction and size of retained austenite show a monotonous increase with the rise in the temperature of the cyclic heat treatment, and the rate of increase becomes notably larger when the temperature is raised from 950 °C to 980 °C. Based on the observed microstructural changes, the variation in the mechanical properties of the 18Ni(C250) maraging steel was analyzed. Specifically, as the cyclic heat treatment temperature increases, the tensile strength of the 18Ni(C250) maraging steel initially increases and then stabilizes, while the elongation and fracture toughness exhibit a monotonic increase.

Contribution of individual phonon to the band gap renormalization in semiconductors

Understanding the origin of temperature-dependent bandgap in semiconductors is essential for their applications in photovoltaics, optoelectronic and space applications. In this regard the electron–phonon coupling is known to play a crucial role in the temperature dependence of the bandgap of semiconductors. Several models have also been proposed in this regard which are also found experimentally compatible; however, these models need to account for more information about the contribution of individual modes in band gap renormalization. The present report is an analytical attempt to do so by utilizing the Bose–Einstein oscillator model, thereby discussing a method for finding the individual renormalization term contributed by respective phonon modes to the overall bandgap. This study contributes to the fundamental understanding of the temperature variation of optical properties of semiconductors that correlates with the role of electron–phonon interaction.

Diagnostics of premature damage to surface-hardened industrial concrete floors

The article presents the diagnostic results on surface-hardened industrial concrete floors. Selected examples of floors showcased premature damage to surface layers, characterized by intense dusting, delamination, and local spalling, while the structural system remained unaffected. Quantitative petrographic analysis of concrete was applied to core specimens from the floors, involving the examination of digital images from a polarizing optical microscope and a scanning electron microscope. The hardening compound and powdered specimens of the cement matrix were characterized using differential thermal analysis and X-ray diffraction. A multiple microindentation method was employed to assess local variations in mechanical properties. Concrete cross-section analysis revealed areas with a non-uniform distribution of air voids, identified regions exhibiting increased porosity, highlighted areas of cracking in the concrete, indicated local variability in the phase composition of cement hydration products, and pointed out the presence of carbonated areas. The causes of the damage were discussed based on these findings,. The crucial role of quantitative petrographic analysis in diagnosing premature surface damage to industrial floors was demonstrated.

High-throughput 16S rRNA gene-based amplicon sequencing reveals the functional divergence of halophilic bacterial communities in the Suaeda salsa root compartments on the eastern coast of China

The rhizosphere environment of plants, which harbors halophilic bacterial communities, faces significant challenges in coping with environmental stressors, particularly saline soil properties. This study utilizes a high-throughput 16S rRNA gene-based amplicon sequencing to investigate the variations in bacterial community dynamics in rhizosphere soil (RH), root surface soil (RS), root endophytic bacteria (PE) compartments of Suaeda salsa roots, and adjoining soils (CK) across six locations along the eastern coast of China: Nantong (NT), Yancheng (YC), Dalian (DL), Tianjin (TJ), Dongying (DY), and Qingdao (QD), all characterized by chloride-type saline soil. Variations in the physicochemical properties of the RH compartment were also evaluated. The results revealed significant changes in pH, electrical conductivity, total salt content, and ion concentrations in RH samples from different locations. Notably, the NT location exhibited the highest alkalinity and nitrogen availability. The pH variations were linked to HCO3− accumulation in S. salsa roots, while salinity stress influenced soil pH through H+ discharge. Despite salinity stress, enzymatic activities such as catalase and urease were higher in soils from various locations. The diversity and richness of bacterial communities were higher in specific locations, with Proteobacteria dominating PE samples from the DL location. Additionally, Vibrio and Marinobacter were prevalent in RH samples. Significant correlations were found between soil pH, salinity, nutrient content, and the abundance and diversity of bacterial taxa in RH samples. Bioinformatics analysis revealed the prevalence of halophilic bacteria, such as Bacillus, Halomonas, and Streptomyces, with diverse metabolic functions, including amino acid and carbohydrate metabolisms. Essential genes, such as auxin response factor (ARF) and GTPase-encoding genes, were abundant in RH samples, suggesting adaptive strategies for harsh environments. Likewise, proline/betaine transport protein genes were enriched, indicating potential bioremediation mechanisms against high salt stress. These findings provide insight into the metabolic adaptations facilitating resilience in saline ecosystems and contribute to understanding the complex interplay between soil conditions, bacterial communities, and plant adaptation.

An analysis of regional variations in the physicochemical properties of Cocos nucifera L. var. nana across Sri Lanka

An analysis of regional variations in the physicochemical properties of Cocos nucifera L. var. nana across Sri Lanka

Explanation based on thermodynamic parameters regarding effect of sensing film thickness and amount of graphene oxide on sensor performance in aniline, N-phenylglycine and graphene oxide based electrochemical heavy metal ion sensor

Background: To construct a heavy metal ion sensor, selectivity and sensitivity are the key important parameters to be taken care of. In our earlier work, film thickness and amount of graphene oxide (GO) content in a novel composite ANGO, synthesized from aniline, N-phenylglycine and GO was varied and sensing parameters including sensitivity, limit of detection (LOD), thermodynamic parameter which includes -∆Gad and charge transport parameter including barrier width (BW), d, of charge transfer based on Simmon’s model were evaluated and compared and an LOD of 800 ppt for Cd2+ was achieved using square wave voltammetry (SWV) withstanding interference from several ions. Methods: In this work, thermodynamic factors such as -∆Gad, ∆H, reorganization energy, partition coefficient and solvated ionic radius were used to explain the sensor performance with respect to film thickness and amount of GO. All the parameters were analyzed for different film thicknesses and amount of GO and a correlation was achieved. Finally, effect of electrochemical surface area of different polyaniline-based material on thermodynamic properties of detection process of Cd2+ was studied. Results: The variation of the thermodynamic properties for Cd2+ sensing with respect to film thickness and amount of GO were examined. Similarly, variation of thermodynamic properties for polyaniline based different sensing materials were examined. Correlation coefficients were developed from the thermodynamic parameters and the d values to explain the underlying mechanism behind improved sensor performance. Conclusions: This study can provide information on the thermodynamic properties which can be predicted from BW technique. The correlation coefficients would help in designing polyaniline based novel sensing film material with the need of lesser number of experiments.

Study of wellbore instability in shale formation considering the effect of hydration on strength weakening

Shale formations often contain a high proportion of clay minerals, which, upon contact with drilling fluid, undergo hydration expansion. This leads to wellbore instability, a problem that poses significant challenges globally. This study aims to investigate the variation of mechanical properties of shale with respect to hydration time. We employ an empirical model that relates shale strength parameters to the time of drilling through geological formations. Additionally, we consider both shear failure along the wellbore boundary and shear sliding along bedding planes in the analysis. We establish a predictive model for wellbore instability in shale formations. The model quantitatively analyzes the variation of wellbore collapse pressure with drilling time. The research findings indicate that, when the influence of bedding is considered, both the wellbore collapse pressure and the optimal well trajectory undergo significant changes, in addition, for some wellbore trajectories, the collapse pressure can increase by more than 30%. Therefore, it is essential to account for the influence of bedding in wellbore stability analysis in shale formations. As the bedding dip angle changes, both the numerical values and distribution range of wellbore collapse pressure and the optimal well trajectory change noticeably. Changes in bedding dip direction, however, do not affect the numerical values of collapse pressure but do influence the distribution region of the optimal well trajectory. Thus, in wellbore trajectory design within shale formations, it is crucial to determine the orientation of bedding and adjust the well trajectory accordingly to enhance wellbore stability. Furthermore, shale hydration does not impact the optimal well trajectory for a block, but with prolonged hydration, the minimum drilling fluid density required to maintain wellbore stability gradually increases. This suggests that hydration intensifies the weakening effect on bedding plane strength. The research results are helpful to understand the effect of hydration on shale wellbore stability and ensure shale wellbore stability during drilling cycle.

The dependence of the magnetism of a near-limb sunspot on height

Context. The physical parameters of the sunspot are not fully understood, especially the height dependence of the magnetic field. So far, it is also an open question as to which heights the He I 10 830 Å spectral line is formed at. Aims. Our aim is to investigate the magnetic and dynamical properties in the atmosphere above a sunspot, from the photosphere to the chromosphere. We analyzed the photospheric and chromospheric magnetic field properties of a stable sunspot in AR 12553 on June 20, 2016 using spectropolarimetric observations obtained with the GREGOR Infrared Spectrograph (GRIS) at the 1.5-meter GREGOR telescope. Methods. A spectral-line inversion technique was used to infer the magnetic field vector and Doppler velocities from the full Stokes profiles. In total, three spectral lines were inverted and the variation of the magnetic properties was qualified using the average values of the radial circles. The sunspot is located close to the solar limb, and thus this allows us to make a geometrical determination of the height of the spectral line He I 10 830 Å. Results. We find the height of helium spectral line to be 970 km above the photospheric spectral lines directly from observation at a stable sunspot. The total magnetic field strength decreases with height over the sunspot; the rates are −0.34 G km−1 for the umbra and −0.28 G km−1 for the penumbra. The inclination increases with increasing height in the umbra, but decreases in the penumbra. In the umbra, the vertical component (Bz) decreases with height, while the horizontal component (Bhor) remains almost constant. In the penumbra this is reversed, as Bz remains nearly constant over height, while Bhor decreases. We also observe fast velocities with 30 km s−1 in small chromospheric patches on the central side of the spot. Conclusions. The key parameters depending on height in the sunspot are the Bz component of the magnetic field for the umbra and the Bhor component of the magnetic field for the penumbra. The observation revealed supersonic downward velocities in and near the outer penumbra.

Study on irradiation effect and damage mechanism in cascode GaN HEMT irradiated by 10 MeV electron

This study investigated the irradiation effect of cascode-structure GaN HEMT (High Electron Mobility Transistor) devices, employing high-energy electrons with an energy of 10 MeV and irradiation doses ranging from 5 to 80 Mrad(Si). The variation of electrical properties of the device under annealing condition was analyzed. Geant4 and TCAD simulations were used to analyze the irradiation effect and damage mechanisms. The results show that the threshold voltage has obvious negative drift and the drain current increases after irradiation. The threshold voltage deviation amplitude of the device increases with the increase of irradiation dose, and the maximum deviation is 1.41V. Annealing at high temperatures (80 °C, 120 °C and 145 °C) partially restores the electrical properties, with a 0.49 V restoration in threshold voltage at 145 °C. Geant4 simulations reveal that enhanced Si MOSFET is more susceptible to total dose effects. TCAD simulations of enhanced Si MOSFET devices demonstrate an increase in electric field intensity, trapped electron concentration, and hole concentration in Si and SiO2 layers with the increase of irradiation dose. These findings can provide support for the space application and irradiation hardening of cascode GaN HEMT devices.

Beyond stiffness: Multiscale viscoelastic features as biomechanical markers for assessing cell types and states

Cell mechanics are pivotal in regulating cellular activities, diseases progression, and cancer development. However, the understanding of how cellular viscoelastic properties vary in physiological and pathological stimuli remains scarce. Here, we develop a hybrid self-similar hierarchical theory-microrheology approach to accurately and efficiently characterize cellular viscoelasticity. Focusing on two key cell types associated with livers fibrosis—the capillarized liver sinusoidal endothelial cells and activated hepatic stellate cells—we uncover a universal two-stage power-law rheology characterized by two distinct exponents, αshort and αlong. The mechanical profiles derived from both exponents exhibit significant potential for discriminating among diverse cells. This finding suggests a potential common dynamic creep characteristic across biological systems, extending our earlier observations in soft tissues. Using a tailored hierarchical model for cellular mechanical structures, we discern significant variations in the viscoelastic properties and their distribution profiles across different cell types and states from the cytoplasm (elastic stiffness E1 and viscosity η), to a single cytoskeleton fiber (elastic stiffness E2), and then to the cell level (transverse expansion stiffness E3). Importantly, we construct a logistic-regression-based machine-learning model using the dynamic parameters that outperforms conventional cell-stiffness-based classifiers in assessing cell states, achieving an area under the curve of 97% vs. 78%. Our findings not only advance a robust framework for monitoring intricate cell dynamics but also highlight the crucial role of cellular viscoelasticity in discerning cell states across a spectrum of liver diseases and prognosis, offering new avenues for developing diagnostic and therapeutic strategies based on cellular viscoelasticity.

Exploring the Effect of Specimen Size on Elastic Properties of Fused-Filament-Fabrication-Printed Polycarbonate and Thermoplastic Polyurethane.

Additive manufacturing (AM) is often used to create designs inspired by topology optimization and biological structures, yielding unique cross-sectional geometries spanning across scales. However, manufacturing defects intrinsic to AM can affect material properties, limiting the applicability of a uniform material model across diverse cross-sections. To examine this phenomenon, this paper explores the influence of specimen size and layer height on the compressive modulus of polycarbonate (PC) and thermoplastic polyurethane (TPU) specimens fabricated using fused filament fabrication (FFF). Micro-computed tomography imaging and compression testing were conducted on the printed samples. The results indicate that while variations in the modulus were statistically significant due to both layer height and size of the specimen in TPU, variations in PC were only statistically significant due to layer height. The highest elastic modulus was observed at a 0.2 mm layer height for both materials across different sizes. These findings offer valuable insights into design components for FFF, emphasizing the importance of considering mechanical property variations due to feature size, especially in TPU. Furthermore, locations with a higher probability of failure are recommended to be printed closer to the print bed, especially for TPU, because of the lower void volume fraction observed near the heated print bed.

P‐109: Investigation of Low Residual Stress Anti Reflection Coating with High Hardness for Display Applications

Anti reflection coating with high hardness on the OLED display surface was studied to improve the wear resistance and visibility of OLED. However, the high residual stress inside the multilayer thin film configuration of anti reflection coating has been a problem and the improvement is necessary. In this study, the residual stress and optical properties variation on various deposition conditions on the thin film were investigated. In addition, we suggested new coating structure using nanocomposites to overcome the residual stress of films.

Valley edge states with opposite chirality in temperature dependent acoustic media

The valley degree of freedom in phononic crystals and metamaterials holds immense promise for manipulating acoustic and elastic waves. However, the impact of acoustic medium properties on valley edge state frequencies and their robustness to one-way propagation in valley topological phononic crystals remains unexplored. While significant attention has been devoted to scatterer design embedded in honeycomb lattices within acoustic and elastic media to achieve valley edge states and topologically protected nontrivial bandgaps, the influence of variations in acoustic medium properties, such as wave velocity and density affected by environmental temperature, has been overlooked. In this study, we investigate the effect of valley edge states and topological phases exhibited by topological phononic lattices in a temperature-dependent acoustic medium. We observe that a decrease in wave velocity and density, influenced by changing environmental temperature, shifts the topological valley edge states to lower frequencies. Therefore, alongside phononic lattice design, it is crucial to consider the impact of acoustic medium properties on the practical application of acoustic topological insulators. This issue becomes particularly significant when a topological phononic crystal is placed in a wave medium that transitions from incompressible to compressible, where wave velocity and density are no longer constant. Our findings offer a novel perspective on investigating topological insulators in variable acoustic media affected by changing thermodynamic and fluid properties.

Growth couples temporal and spatial fluctuations of tissue properties during morphogenesis

Living tissues display fluctuations-random spatial and temporal variations of tissue properties around their reference values-at multiple scales. It is believed that such fluctuations may enable tissues to sense their state or their size. Recent theoretical studies developed specific models of fluctuations in growing tissues and predicted that fluctuations of growth show long-range correlations. Here, we elaborated upon these predictions and we tested them using experimental data. We first introduced a minimal model for the fluctuations of any quantity that has some level of temporal persistence or memory, such as concentration of a molecule, local growth rate, or mechanical property. We found that long-range correlations are generic, applying to any such quantity, and that growth couples temporal and spatial fluctuations, through a mechanism that we call "fluctuation stretching"-growth enlarges the length scale of variation of this quantity. We then analyzed growth data from sepals of the model plant Arabidopsis and we quantified spatial and temporal fluctuations of cell growth using the previously developed cellular Fourier transform. Growth appears to have long-range correlations. We compared different genotypes and growth conditions: mutants with lower or higher response to mechanical stress have lower temporal correlations and longer-range spatial correlations than wild-type plants. Finally, we used theoretical predictions to merge experimental data from all conditions and developmental stages into a unifying curve, validating the notion that temporal and spatial fluctuations are coupled by growth. Altogether, our work reveals kinematic constraints on spatiotemporal fluctuations that have an impact on the robustness of morphogenesis.

Spatial-temporal variability in nitrogen use efficiency: Insights from a long-term experiment and crop simulation modeling to support site specific nitrogen management

Within-field soil heterogeneity can lead to large variation in nitrogen use efficiency (NUE). Crop simulation models provide a multi-faceted approach to management considering both soil and plant interactions. However, research using crop models for investigating within field variation in NUE is limited, in part because of challenges quantifying spatially variable soil model parameters. Here soil apparent electrical conductivity (ECa) and measured soil properties were used to map spatial variations in soil characteristics across a Long-Term Experiment in Norfolk, England. The relationship between plot ECa across the 3 ha experiment and agronomic data across three different nitrogen rates (0, 110, and 220 kg N ha-1) over five wheat years (2010–2020) was quantified. The Sirius crop model was parameterized for two soils representing the extremes of ECa. Sirius was validated using recorded plot data. Site-specific optimal nitrogen and associated leaching risks were simulated across 29 years of weather data. Variation in soil properties had significant impact on measured NUE. At 220 kg N ha-1 mean observed yields across 5 years ranged from 9.0 to 10.7 t ha-1 and grain protein from 11.6% to 11% on the low EC and high EC plots, respectively. On average fertiliser grain N recovery was 19.7 kg N ha-1 lower on the low ECa plots. Sirius simulated the variation in yield, grain protein and grain N recovery to a good level of accuracy with RRMSE of 19.5%, 15.4% and 19.5%, respectively. Simulated optimal nitrogen on the low EC soils was on average 12 kg N ha-1 lower, with >1 in 4 years with optimal nitrogen <200 kg N ha-1. Our work demonstrated that using a combination of proximal soil EC scans and targeted soil sampling we can optimize the data requirements for model parameterisation to support site-specific N management.

Ecological Characteristics of Culturable Myxobacteria in the Rhizosphere Soil of Saline-Tolerant Plants in the Ebinur Saline Wetlands

T his study investigated the ecological distribution of myxobacteria in the saline environment of the Ebinur Lake Wetland, in China, which provides a unique microecological environment for their survival. Culturable myxobacteria were isolated using traditional methods including Escherichia coli DH5α, rabbit feces, and filter paper flakes as food sources. Molecular identification along with physiological, biochemical assays and morphological characterization was carried out for the classification and identification of myxobacteria. Associations between soil environmental factors and myxobacterial diversity were analyzed using redundancy analysis. This study involved collecting rhizosphere soil from 15 species of salt-tolerant plants, ultimately yielding 15 strains of myxobacteria from eight of these species. Fifteen strains of myxobacteria were taxonomically placed by analyzing 16S rRNA homology, seven strains were closely related to Myxococcus virescens, six strains were closely related to Myxococcus fulvus and two strains were closely related to Myxococcus xanthus. Myxococcus virescens, the dominant cultivable species of myxobacteria in the Ebinur Lake Wetland, was isolated from various sampling sites using traditional methods. Analysis of antibiotic resistance revealed that myxobacterial strains M2, M6, M9, M13, and M15 are resistant to gentamicin. Furthermore, predation assays demonstrated that myxobacterial strain M14 exhibits the broadest spectrum of predation against both bacterial and fungal prey. The limited culturable myxobacterial diversity observed in the Ebinur Lake Wetland could potentially result from variations in soil physicochemical properties, vegetation type, and employed isolation methods. These findings enhance our comprehension of the myxobacterial resources within this specific salt desert ecosystem.