Properties Of Scaffolds Research Articles

Electrophysiological features of cortical 3D networks are deeply modulated by scaffold properties.

Three-dimensionality (3D) was proven essential for developing reliable models for different anatomical compartments and many diseases. However, the neuronal compartment still poses a great challenge as we still do not understand precisely how the brain computes information and how the complex chain of neuronal events can generate conscious behavior. Therefore, a comprehensive model of neuronal tissue has not yet been found. The present work was conceived in this framework: we aimed to contribute to what must be a collective effort by filling in some information on possible 3D strategies to pursue. We compared directly different kinds of scaffolds (i.e., PDMS sponges, thermally crosslinked hydrogels, and glass microbeads) in their effect on neuronal network activity recorded using micro-electrode arrays. While the overall rate of spiking activity remained consistent, the type of scaffold had a notable impact on bursting dynamics. The frequency, density of bursts, and occurrence of random spikes were all affected. The examination of inter-burst intervals revealed distinct burst generation patterns unique to different scaffold types. Network burst propagation unveiled divergent trends among configurations. Notably, it showed the most differences, underlying that functional variations may arise from a different 3D spatial organization. This evidence suggests that not all 3D neuronal constructs can sustain the same level of richness of activity. Furthermore, we commented on the reproducibility, efficacy, and scalability of the methods, where the beads still offer superior performances. By comparing different 3D scaffolds, our results move toward understanding the best strategies to develop functional 3D neuronal units for reliable pre-clinical studies.

Biomechanical evaluation of a sheep tracheal scaffold.

Tissue engineering is a set of techniques for producing or reconstructing tissue that primarily aims to restore or improve the function of tissues in the human body. The aim of the present study was to evaluate the mechanical and histological characteristics of decellularized tracheal scaffolds prepared in comparison with fresh trachea for use in tracheal repair. In order to prepare the scaffold, sheep's trachea was prepared and after cleaning the waste tissues, they were decellularized. Then decellularized scaffolds were evaluated histologically and laboratory and numerical study of the nonlinear mechanical behavior of tracheal tissue and scaffold and their comparison. Examining the results of histological evaluations showed that the decellularization of the scaffolds was completely done. These results were confirmed by hematoxylin-eosin staining. Also, the exact hyperelastic properties of tracheal tissue and scaffold were used in biomechanical models, and according to the presented results, the five-term Mooney-Rivlin strain energy density function became a suitable behavioral model for modeling the hyperelastic behavior of trachea and scaffold. In total, the results of this research showed that the scaffolds obtained from decellularization by preserving the main compositions of the desired tissue can be a suitable platform for investigating cell behaviors.

Multimaterial additive manufacturing of poly-L-lactic acid– hydroxylapatite/graphene oxide scaffold fabricated via vat photopolymerization: experimental investigation, analysis and cell study

PurposeThis study aims to design and implement a multimaterial system for printing multifunctional specimens suitable for various sectors, with a particular focus on biomedical applications such as addressing mandibular bone loss.Design/methodology/approachTo enhance both the mechanical and biological properties of scaffolds, an automatic multimaterial setup using vat photopolymerization was developed. This setup features a linear system with two resin vats and one ultrasonic cleaning tank, facilitating the integration of diverse materials and structures to optimize scaffold composition. Such versatility allows for the simultaneous achievement of various characteristics in scaffold design.FindingsThe printed multimaterial scaffolds, featuring 20 Wt.% hydroxylapatite (HA) on the interior and poly-L-lactic acid (PLLA) with 1 Wt.% graphene oxide (GO) on the exterior, exhibited favorable mechanical and biological properties at the optimum postcuring and heat-treatment time. Using an edited triply periodic minimal surface (TPMS) lattice structure further enhanced these properties. Various multimaterial specimens were successfully printed and evaluated, showcasing the capability of the setup to ensure functionality, cleanliness and adequate interface bonding. Additionally, a novel Gyroid TPMS scaffold with a nominal porosity of 50% was developed and experimentally validated.Originality/valueThis study demonstrates the successful fabrication of multimaterial components with minimal contaminations and suitable mechanical and biological properties. By combining PLLA-HA and PLLA-GO, this innovative technique holds significant promise for enhancing the effectiveness of regenerative procedures, particularly in the realm of dentistry.

Polycaprolactone in Bone Tissue Engineering: A Comprehensive Review of Innovations in Scaffold Fabrication and Surface Modifications.

Bone tissue engineering has seen significant advancements with innovative scaffold fabrication techniques such as 3D printing. This review focuses on enhancing polycaprolactone (PCL) scaffold properties through structural modifications, including surface treatments, pore architecture adjustments, and the incorporation of biomaterials like hydroxyapatite (HA). These modifications aim to improve scaffold conformation, cellular behavior, and mechanical performance, with particular emphasis on the role of mesenchymal stem cells (MSCs) in bone regeneration. The review also explores the potential of integrating nanomaterials and graphene oxide (GO) to further enhance the mechanical and biological properties of PCL scaffolds. Future directions involve optimizing scaffold structures and compositions for improved bone tissue regeneration outcomes.

Mechanical and Permeability Properties of Radial-Gradient Bone Scaffolds Developed by Voronoi Tessellation for Bone Tissue Engineering

Mechanical and Permeability Properties of Radial-Gradient Bone Scaffolds Developed by Voronoi Tessellation for Bone Tissue Engineering

Fabrication and Characterization of Polycaprolactone-Baghdadite Nanofibers by Electrospinning Method for Tissue Engineering Applications.

This work investigates the essential constituents, production methods, and properties of polycaprolactone (PCL) and Baghdadite fibrous scaffolds. In this research, electrospinning was used to produce fiber ropes. In this study, the Baghdadite powder was synthesized using the sol-gel method and incorporated into PCL's polymeric matrix in formic acid and acetic acid solvents. The present work examined PCL-Baghdadite fibrous scaffolds at 1%, 3%, and 5 wt% for morphology, fiber diameter size, hydrophilicity, porosity, mechanical properties, degradability, and bioactivity. The introduction of Baghdadite nanopowder into pure PCL scaffolds reduced fiber diameter. The wetting angle decreased when Baghdadite nanopowder was added to fibrous scaffolds. Pure PCL reduced the wetting angle from 93.20° to 70.53°. Fibrous PCL scaffolds with Baghdadite nanopowder have better mechanical characteristics. The tensile strength of pure PCL fibers was determined at 2.08 ± 0.2 MPa, which was enhanced by up to 3 wt% by adding Baghdadite nanopowder. Fiber elasticity increased with tensile strength. Baghdadite at a 5% weight percentage reduced failure strain percentage. Fibers with more Baghdadite nanopowder biodegrade faster. Adding Baghdadite ceramic nanoparticles resulted in increased bioactivity and caused scaffolds to generate hydroxyapatite. The results show that Baghdadite PCL-3 wt% fibers have promising shape, diameter, and mechanical qualities. After 24 h, L-929 fibroblast cell viability was greater in the scaffold with 3% Baghdadite weight compared to the pure PCL. PCL-3 wt% Baghdadite fibers generated hydroxyapatite on the surface and degraded well. Based on the above findings, PCL fibers having 3 wt% of Baghdadite are the best sample for tissue engineering applications that heal flaws.

Cell-Material Interactions in Covalent Adaptable Thioester Hydrogels.

Covalent adaptable networks (CANs) are polymeric networks with cross-links that can break and reform in response to external stimuli, including pH, shear, and temperature, making them potential materials for use as injectable cell delivery vehicles. In the native niche, cells rearrange the extracellular matrix (ECM) to undergo basic functions including migration, spreading, and proliferation. Bond rearrangement enables these hydrogels to mimic viscoelastic properties of the native ECM which promote migration and delivery from the material to the native tissue. In this work, we characterize thioester CANs to inform their design as effective cell delivery vehicles. Using bulk rheology, we characterize the rearrangement of these networks when they are subjected to strain, which mimics the strain applied by a syringe, and using multiple particle tracking microrheology (MPT) we measure cell-mediated remodeling of the pericellular region. Thioester networks are formed by photopolymerizing 8-arm poly(ethylene glycol) (PEG)-thiol and PEG-thioester norbornene. Bulk rheology measures scaffold properties during low and high strain and demonstrates that thioester scaffolds can recover rheological properties after high strain is applied. We then 3D encapsulated human mesenchymal stem cells (hMSCs) in thioester scaffolds. Using MPT, we characterize degradation in the pericellular region. Encapsulated hMSCs degrade these scaffolds within ≈4 days post-encapsulation. We hypothesize that this degradation is mainly due to cytoskeletal tension that cells apply to the matrix, causing adaptable thioester bonds to rearrange, leading to degradation. To verify this, we inhibited cytoskeletal tension using blebbistatin, a myosin-II inhibitor. Blebbistatin-treated cells can degrade these networks only by secreting enzymes including esterases. Esterases hydrolyze thioester bonds, which generate free thiols, leading to bond exchange. Around treated cells, we measure a decrease in the extent of pericellular degradation. We also compare cell area, eccentricity, and speed of untreated and treated cells. Inhibiting cytoskeletal tension results in significantly smaller cell area, more rounded cells, and lower cell speeds when compared to untreated cells. Overall, this work shows that cytoskeletal tension plays a major role in hMSC-mediated degradation of thioester networks. Cytoskeletal tension is also important for the spreading and motility of hMSCs in these networks. This work informs the design of thioester scaffolds for tissue regeneration and cell delivery.

Mechanical properties of polycaprolactone bone scaffolds reinforced with carbon nanotube-modified tricalcium phosphate

Mechanical properties of polycaprolactone bone scaffolds reinforced with carbon nanotube-modified tricalcium phosphate

Comparative Study of Autogenic and Allogenic Chondrocyte Transplants on Polyethersulfone Scaffolds for Cartilage Regeneration.

The aim of this study was to evaluate the chondrogenic potential of chondrocyte transplants cultured in vitro on polyethersulfone (PES) membranes. Forty-eight rabbits (96 knee joints) were used in the project. The synthetic, macro-porous PES membranes were used as scaffolds. Fragments of articular cartilage were harvested from non-weight-bearing areas of the joints of the animals. Chondrocytes were isolated and then cultivated on PES scaffolds for 3 weeks. The animals were divided into four groups. All the lesions in the articular cartilage were full thickness defects. In Group I, autogenic chondrocytes on PES membranes were transplanted into the defect area; in Group II, allogenic chondrocytes on PES membranes were transplanted into the defect area; in Group III, pure PES membranes were transplanted into the defect area; and in Group IV, lesions were left untreated. Half of the animals from each group were terminated after 8 weeks, and the remaining half were terminated 12 weeks postoperatively. The samples underwent macroscopic evaluation using the Brittberg scale and microscopic evaluation using the O'Driscoll scale. The best regeneration was observed in Groups II and I. In Group I, the results were achieved with two surgeries, while in Group II, only one operation was needed. This indicates that allogenic chondrocytes do not require two surgeries, highlighting the importance of further in vivo studies to better understand this advantage. The success of the study and the desired properties of PES scaffolds are attributed mainly to the presence of sulfonic groups in the structure of the material. These groups, similar to chondroitin sulfate, which naturally occurs in hyaline cartilage, likely enable mutual affinity between the scaffold and cells and promote scaffold colonization by the cells.

Controlling Mechanical Properties of Medical-Grade Scaffolds through Electrospinning Parameter Selection.

Electrospinning (ES) is a versatile process mode for creating fibrous materials with various structures that have broad applications ranging from regenerative medicine to tissue engineering and surgical mesh implants. The recent commercialization of this technology for implant use has driven the use of resorbable electrospun products. Resorbable electrospun meshes offer great promise as temporary implants that can utilize the layer upon layer method of additive manufacturing to incorporate porosity as a function of process parameters into a scaffold structure. The interconnected porosity and feature size known to ES have previously been observed to hold great potential for simulating the natural cellular environment of soft tissue. This microstructure, proper degradation kinetics, and mechanical properties combine to provide the design basis for artificial tissue structures that could aid in not only wound healing but also true tissue engineering and regenerative medicine. While current advancement in the field is understood to be limited by material properties, the importance of optimizing mechanical properties with currently available materials should not be overlooked. This work investigated the process parameter effects and interactions that control the structure-property relationship for a range of medical-grade aliphatic polyester materials with a range of intrinsic properties. An ε-caprolactone homopolymer (PCL), l-lactide homopolymer (PLLA), and Lactoflex, a copolymer with intermediate properties relative to the homopolymers, were characterized before, during, and after the additive manufacturing process. The interacting effects of process parameters, distance to collector, and dispensing rate were shown to produce variable-density, nonwoven scaffold structures. The resorbable mesh scaffolds of PLLA, PCL, and Lactoflex demonstrated a broad range of mechanical properties (approximately 1-10 MPa ultimate tensile strength and 5-390 MPa tensile modulus). Postprocessing of scaffolds demonstrated removal of solvents and preservation of micrometer-sized features. Resorbable polymers and electrospinning can produce scaffold materials with excellent features and offer tremendous potential in the field of implantable resorbable devices.

Preparation and properties of biomimetic bone repair hydrogel with sandwich structure.

One of the critical factors that determines the biological properties of scaffolds is their structure. Due to the mechanical and structural discrepancies between the target bone and implants, the poor internal architecture design and difficulty in degradation of conventional bone implants may cause several adverse outcomes. To date, many scaffolds, such as 3-D printed sandwich structures, have been successfully developed for the repair of bone defects; however, the steps of these methods are complex and costly. Hydrogels have emerged as a unique scaffold material for repairing bone defects because of their good biocompatibility and excellent physicochemical properties. However, studies exploring bioinspired hydrogel scaffolds with hierarchical structures are scarce. More efforts are needed to incorporate bioinspired structures into hydrogel scaffolds to achieve optimal osteogenic properties. In this study, we developed a low-cost and easily available hydrogel matrix that mimicked the natural structure of the bone's porous sandwich to promote new bone growth and tissue integration. A comprehensive evaluation was conducted on the microstructure, swelling rate, and mechanical properties of this hydrogel. Furthermore, a 3D finite element analysis was employed to model the structure-property relationship. The results indicate that the sandwich-structured hydrogel is a promising scaffold material for bone injury repair, exhibiting enhanced compressive stress, elastic modulus, energy storage modulus, and superior force transmission.

Enhancing mechanical performance of solvent-cast 3D printed PCL composites: A comprehensive optimization approach

This study aims to enhance the mechanical properties of 3D-printed scaffolds by optimizing a composite of Poly-ε-caprolactone (PCL), poly-hydroxybutyrate (PHB), and synthetic fluorapatite (FHAp) using Response Surface Methodology (RSM). The research targets the intricate relationships between PCL, PHB, and FHAp concentrations, crucial for achieving optimal tensile, compressive, and flexural strengths. The solvent-cast process successfully yielded FHAp-reinforced PCL composites, confirmed by XRD and FTIR spectra. The findings indicate that an optimal PHB content of over 15 % wt/v and PCL under 10 % wt/v significantly enhance tensile strength, achieving values up to 48 MPa. Compressive strength peaked at PHB concentrations of 13–16 % wt/v and PCL concentrations of 9–13 % wt/v, showcasing effective stress transmission, with the highest recorded value being 90 MPa. Flexural strength exceeded 100 MPa with lower concentrations of PCL and PHB, emphasizing the need for a balance of rigidity and flexibility. The study identifies the optimum composition for these mechanical properties at PCL 9.432 % wt/v, PHB 16.568 % wt/v, and FHAp 24.933 % wt/v, crucial for advanced biomedical implant applications.

Optimization of Ethoxzolamide Analogs with Improved Pharmacokinetic Properties for In Vivo Efficacy against Neisseria gonorrhoeae.

Drug-resistant gonorrhea is caused by the bacterial pathogen Neisseria gonorrhoeae, for which there is no recommended oral treatment. We have demonstrated that the FDA-approved human carbonic anhydrase inhibitor ethoxzolamide potently inhibits N. gonorrhoeae; however, is not effective at reducing N. gonorrhoeae bioburden in a mouse model. Thus, we sought to optimize the pharmacokinetic properties of the ethoxzolamide scaffold. These efforts resulted in analogs with improved activity against N. gonorrhoeae, increased metabolic stability in mouse liver microsomes, and improved Caco-2 permeability compared to ethoxzolamide. Improvement in these properties resulted in increased plasma exposure in vivo after oral dosing. Top compounds were investigated for in vivo efficacy in a vaginal mouse model of gonococcal genital tract infection, and they significantly decreased the gonococcal burden compared to vehicle and ethoxzolamide controls. Altogether, results from this study provide evidence that ethoxzolamide-based compounds have the potential to be effective oral therapeutics against gonococcal infection.

Optimizing silicon doping levels for enhanced osteogenic and angiogenic properties of 3D-printed biphasic calcium phosphate scaffolds: An in vitro screening and in vivo validation study

Biphasic calcium phosphate (BCP) ceramics are valued for their osteoconductive properties but have limited osteogenic and angiogenic activities, which restricts their clinical utility in bone defect repair. Silicon doping has emerged as an effective strategy to enhance these biological functions of BCP. However, the biological impact of BCP is influenced by the level of silicon doping, necessitating determination of the optimal concentration to maximize efficacy in bone repair. This study investigated the effects of silicon doping on both the physicochemical and biological properties of BCP, with a specific focus on osteogenic and angiogenic potentials. Results indicated that silicon doping exceeding 4 mol.% led to the formation of α-TCP, accelerating BCP degradation, enhancing silicon ion release, and promoting mineralization product formation. Simultaneously, silicon doping increased the porosity of BCP scaffolds, which typically reduces their compressive strength. Nevertheless, scaffolds doped with ≤4 mol.% silicon maintained compressive strengths exceeding 2 MPa. In vitro biological experiments indicated that higher levels of silicon doping (≥6 mol.%) partially inhibited the successful differentiation of stem cells and the vascularization of endothelial cells. Optimal conditions for promoting osteogenic differentiation and angiogenesis were identified between 2 and 4 mol.% silicon doping, with an optimal level of approximately 4 mol.%. Subsequent in vivo experiments confirmed that BCP scaffolds doped with 4 mol.% silicon effectively promoted vascularization and new bone formation, highlighting their potential for clinical bone defect repair.

Lyophilized Polyvinyl Alcohol and Chitosan Scaffolds Pre-Loaded with Silicon Dioxide Nanoparticles for Tissue Regeneration.

Materials with a soft tissue regenerative capacity can be produced using biopolymer scaffolds and nanomaterials, which allow injured tissue to recover without any side effects or limitations. Four formulations were prepared using polyvinyl alcohol (PVA) and chitosan (CS), with silicon dioxide nanoparticles (NPs-SiO2) incorporated using the freeze-drying method at a temperature of -50 °C. TGA and DSC showed no change in thermal degradation, with glass transition temperatures around 74 °C and 77 °C. The interactions between the hydroxyl groups of PVA and CS remained stable. Scanning electron microscopy (SEM) indicated that the incorporation of NPs-SiO2 complemented the freeze-drying process, enabling the dispersion of the components on the polymeric matrix and obtaining structures with a small pore size (between 30 and 60 μm) and large pores (between 100 and 160 μm). The antimicrobial capacity analysis of Gram-positive and Gram-negative bacteria revealed that the scaffolds inhibited around 99% of K. pneumoniae, E. cloacae, and S. aureus ATCC 55804. The subdermal implantation analysis demonstrated tissue growth and proliferation, with good biocompatibility, promoting the healing process for tissue restoration through the simultaneous degradation and formation of type I collagen fibers. All the results presented expand the boundaries in tissue engineering and regenerative medicine by highlighting the crucial role of nanoparticles in optimizing scaffold properties.

Dimolybdenum (II,II) paddlewheel complexes bearing non-steroidal anti-inflammatory drug ligands: Insights into the chemico-physical profile and first biological assessment

Multinuclear complexes are metal compounds featured by adjacent bound metal centers that can lead to unconventional reactivity. Some M2L4-type paddlewheel dinuclear complexes with monoanionic bridging ligands feature promising properties, including therapeutic ones. Molybdenum has been studied for the formation of multiple-bonded M2+ compounds due to their unique scaffold, redox, and spectroscopic properties as well as for applications in several fields including catalysis and biology. These latter are much less explored and only sporadic studies have been carried out. Here, a series of four dimolybdenum (II,II) carboxylate paddlewheel complexes were synthesized using different Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) as ligands. The reaction of (NH4)5[Mo2Cl9]·H2O with the selected NSAIDs in methanol produced the complexes Mo2(μ-O2CR)4 where RCO2 is ibuprofen (1), naproxen (2), aspirin (3) and indomethacin (4). The products were obtained in good yields and extensively characterized with integrated techniques. Stability and solution behaviour were studied using a mixed experimental and computational approach. Finally, the biological activity of 1 and 3 (i.e. the most reactive and the most stable compounds of the series, respectively) was preliminarily assessed confirming the disassembling of the molecules in the biological milieu. Overall, some very interesting results emerged for these unconventional compounds from a mechanistic point of view.

Boron-Doped Carbon Scaffold Hosts for Li Metal Batteries

Lithium metal anodes offer the promise of higher energy density batteries. However, the formation of lithium dendrites due to non-uniform plating and stripping of the lithium metal has proven to be a major hurdle for this technology, decreasing the lifetime of the device and causing safety hazards. Utilizing a carbon scaffold host for the lithium metal anode can limit dendrite formation by providing a more uniform electric field and numerous lithium nucleation sites to encourage uniform plating and stripping. In this poster, we present our work developing carbon scaffold hosts for lithium metal anodes. We synthesized scaffolds with various architectures and microstructures using different carbon materials. Our atomistic simulations demonstrated that the addition of boron to the carbon results in stronger binding of lithium to the carbon surface, further improving the lithiophilicity. Therefore, we also prepared boron-doped carbon scaffolds to test this experimentally. Boron was introduced using boric acid and incorporated into the carbon structure during carbonization under nitrogen, and these samples were characterized by XPS, SEM, and BET to try and correlate scaffold properties with performance. In addition, we are investigating other dopants (such as nitrogen), which have also been reported to increase the lithiophilicity of carbon materials. Utilizing these doped carbon scaffolds can help increase the lifetime of lithium metal batteries by improving the cycling uniformity.This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344

Mechanical behaviors of tantalum scaffolds with node optimization fabricated by laser powder bed fusion

Tantalum scaffolds fabricated by laser powder bed fusion are promising load-bearing orthopedic implant materials because of their superior corrosion resistance and biocompatibility. Nevertheless, the stress concentration harms the mechanical performance and service life of the biomaterials. To alleviate this deficiency, dodecahedron porous tantalum scaffolds with various optimized radii were designed and fabricated. The influence of node optimization on the compressive mechanical property of porous tantalum scaffolds was investigated by compression testing, scanning electron microscopy (SEM), and finite element analysis (FEA). The as-built tantalum scaffolds were tightly connected and arranged neatly without apparently macroscopic defects. Due to the introduction of node optimization, the scaffolds with optimized radius at the node demonstrated enhanced mechanical properties and compressive capacity. The compressive yield strength and elastic modulus increased from 6.23 ± 0.83 MPa to 12.94 ± 0.94 MPa and from 0.25 ± 0.05 GPa to 0.39 ± 0.07 GPa, respectively, as the optimum radius grew from 0 to 200 μm. It was shown that the scaffolds displayed a progressive layer-by-layer collapse behavior combined with buckling and bending deformation. The results of the FEA were consistent with the compression tests and showed that adding an appropriate node optimization would relieve the stress concentration and increase the load-bearing capacity of porous tantalum scaffolds.

Biofabrication of aminated nanocellulose reinforced polyvinyl alcohol/chitosan nanofibrous scaffold for sustained release of diltiazem hydrochloride

In the modern environment conscious era, there has been a huge demand for the effective green method to fabricate biomaterials for sustained transdermal release of diltiazem hydrochloride to treat hypertension and cardiac failure. In this vein, the present study explores the amination of waste jute sourced nanocellulose (ANC) and its effect as a reinforcing filler to design electrospun polyvinyl alcohol (PVA)/chitosan based polymeric nanofibrous scaffold for drug delivery. The characterization results of FTIR (Fourier Transform Infrared Spectroscopy) confirm the successful chemical modification of nanocellulose (NCC). SEM (Scanning Electron Microscopy) results indicate the morphological modifications in ANC due to grafting. ANC enhances the mechanical properties of scaffold and sustains the release of the loaded drug to 67.89±3.39% as compared to the pure PVA/chitosan scaffold of 92.63±4.63% over a period of 72 h as shown by the results of in-vitro drug release study. Moreover, the incorporation of 0.5 % ANC improves the anti-bacterial activity against both gram-positive (97.4±4.87%, reduction in viable cells count) and gram-negative bacteria (98.5±4.93%, reduction in viable cells count). Further, the skin irritation and MTT assay authenticate the biocompatibility of the developed scaffold. The overall findings hence prove the efficacy of the engineered scaffold as a potential transdermal patch for sustained drug delivery applications.

3D Printed PLA Porous Scaffolds with Engineered Cell Size and Porosity Promote the Effectiveness of the Kelvin Model for Bone Tissue Engineering

AbstractIn this study, the aim is to investigate the effect of engineering the cell size and porosity of 3D‐printed poly lactic acid (PLA) porous scaffolds from the Kelvin model for bone tissue engineering applications. The Kelvin model is used as a bone tissue scaffold with different cell sizes and porosities. PLA, as a biodegradable and biocompatible polymer, is used to fabricate these scaffolds using the FDM technique. A compression test is used to evaluate the mechanical properties of scaffolds. The MTT assay has been used to investigate cell viability. For osteogenic differentiation studies, ALP activity and ARS assays are used. Increasing the porosity reduces the mechanical properties of the scaffold. While increasing the cell size at constant porosity increases the Young's modulus and yield stress in the samples, it is also observed that, in high porosities, the increase in cell size weakens the mechanical properties. Also, Kelvin model scaffolds help the proliferation and osteogenic differentiation of cells and have no toxic effect. It is demonstrated that this approach promotes the effectiveness of the Kelvin architecture for bone tissue engineering. As a result, designing the most suitable model based on cell size and porosity for the treatment process in the targeted area could be promising.