Formation Of Products Research Articles

Simultaneous Formate and Syngas Conversion Boosts Growth and Product Formation by Clostridium ragsdalei.

Electrocatalytic CO2 reduction to CO and formate can be coupled to gas fermentation with anaerobic microorganisms. In combination with a competing hydrogen evolution reaction in the cathode in aqueous medium, the in situ, electrocatalytic produced syngas components can be converted by an acetogenic bacterium, such as Clostridium ragsdalei, into acetate, ethanol, and 2,3-butanediol. In order to study the simultaneous conversion of CO, CO2, and formate together with H2 with C. ragsdalei, fed-batch processes were conducted with continuous gassing using a fully controlled stirred tank bioreactor. Formate was added continuously, and various initial CO partial pressures (pCO0) were applied. C. ragsdalei utilized CO as the favored substrate for growth and product formation, but below a partial pressure of 30 mbar CO in the bioreactor, a simultaneous CO2/H2 conversion was observed. Formate supplementation enabled 20-50% higher growth rates independent of the partial pressure of CO and improved the acetate and 2,3-butanediol production. Finally, the reaction conditions were identified, allowing the parallel CO, CO2, formate, and H2 consumption with C. ragsdalei at a limiting CO partial pressure below 30 mbar, pH 5.5, n = 1200 min-1, and T = 32 °C. Thus, improved carbon and electron conversion is possible to establish efficient and sustainable processes with acetogenic bacteria, as shown in the example of C. ragsdalei.

Heteroallene Insertions into Tin(II) Alkoxide Bonds.

A series of iso-carbamate complexes have been synthesized by the reaction of [SnII(OiPr)2] or [SnII(OtBu)2] with either aryl or alkyl isocyanates, ONC-R (R = 2,4,6-trimethylphenyl (Mes), 2,6-diisopropylphenyl (Dipp), isopropyl (iPr), cyclohexyl (Cy) and tert-butyl (tBu)). In the case of aryl isocyanates, mono-insertion occurs to form structurally characterized complexes [Sn{κ2-N,O-R-NC(OiPr)O}(μ-OiPr)]2 (1: R = Mes, 2: R = Dipp) and [Sn{κ2-N,O-R-NC(OtBu)O}(μ-OtBu)]2 (3: R = Mes, 4: R = Dipp). The complicated solution-state chemistry of these species has been explored using 1H DOSY experiments. In contrast, reactions of tin(II) alkoxides with alkyl isocyanates result in the formation of bis-insertion products [Sn{κ2-N,O-R-NC(OiPr)O}2] (5: R = iPr, and 6: R = Cy) and [Sn{κ2-N,O-R-NC(OtBu)O}2] (7: R = iPr, 8: R = Cy), of which complexes 6-8 have also been structurally characterized. 1H NMR studies show that the reaction of tBu-NCO with either [Sn(OiPr)2] or [Sn(OtBu)2] results in a reversible mono-insertion. Variable-temperature 2D 1H-1H exchange spectroscopy (VT-2D-EXSY) was used to determine the rate of exchange between free tBu-NCO and the coordinated tBu-iso-carbamate ligand for the {OiPr} alkoxide complex, as well as the activation energy (Ea = 92.2 ± 0.8 kJ mol-1), enthalpy (ΔH‡ = 89.4 ± 0.8 kJ mol-1), and entropy (ΔS‡ = 12.6 ± 2.9 J mol-1 K-1) for the process [Sn(OiPr)2] + tBu-NCO ↔ [Sn{κ2-N,O-tBu-NC(OiPr)O}(OiPr)]. Attempts to form Sn(II) alkyl carbonates by the insertion of CO2 into either [Sn(OiPr)2] or [Sn(OtBu)2] proved unsuccessful. However, 119Sn{1H} NMR spectroscopy of the reaction of excess CO2 with [Sn(OiPr)2] reveals the presence of a new Sn(II) species, i.e., [(iPrO)Sn(O2COiPr)], VT-2D-EXSY (1H) of which confirms the reversible alkyl carbonate formation (Ea = 70.3 ± 13.0 kJ mol-1; ΔH‡ = 68.0 ± 1.3 kJ mol-1 and ΔS‡ = -8.07 ± 2.8 J mol-1 K-1).

Gel‐forming properties of Bambara groundnut globulin and protein subfractions: structural and rheological characterisation

SummaryThe gel‐forming ability of the pulse proteins influences the formation of food products with desirable texture, structure, and stability. In this study, Bambara globulin was fractionated into legumin and vicilin for structural and physicochemical analyses, and heat‐induced gel rheological characterisation. Bambara globulin showed major vicilin (7S, Mw: 120 kDa) and minor legumin (11S, Mw: 410 kDa) components by size exclusion chromatography and gel electrophoresis analyses. Legumin had the lowest amount of all the charged amino acids. One basic subunit (22 kDa) was identified in the legumin fraction with predominant helical structures. The sol–gel transition temperatures increased in the order of globulin (40 °C) < legumin (50 °C) < vicilin (80 °C). The G′ and G″ of globulin showed relatively low dependency on heating time beyond the gel point compared to legumin and vicilin subfractions, suggesting a more rapid establishment of its gel network during gelation. Vicilin gel consisted of a microporous structure with a small lath sheet‐like structure compared to others. Bambara vicilin could be a prospective ingredient in the development of new products with defined textural characteristics.

Hydrothermal liquefaction of composite household waste to biocrude: the effect of liquefaction solvents on product yield and quality.

The hydrothermal liquefaction (HTL) of composite household waste (CHW) was investigated at different temperatures in the range of 240-360 °C, residence times in the range of 30-90 min, and co-solvent ratios of 2-8 ml/g, by utilising ethanol, glycerol, and produced aqueous phase as liquefaction solvents. Maximum biocrude yield of 46.19% was obtained at 340 °C and 75 min, with aqueous phase recirculation ratio (RR) of 5 ml/g. The chemical solvents such as glycerol and ethanol yielded a biocrude percentage of 45.18% and 42.16% at a ratio of 6 ml/g and 8 ml/g, respectively, for 340 °C and 75 min. The usage of co-solvents as hydrothermal medium increased the biocrude yield by 35.30% and decreased the formation of solid residue and gaseous products by 19.82% and 18.74% respectively. Also, the solid residue and biocrude obtained from co-solvent HTL possessed higher carbon and hydrogen content, thus having a H/C ratio and HHV that is 1.01 and 1.23 times higher than that of water as hydrothermal medium. Among the co-solvents, HTL with aqueous phase recirculation resulted in higher carbon and energy recovery percentages of 9.36% and 9.78% for solid residue and 52.09% and 56.75% for biocrude respectively. Further qualitatively, co-solvent HTL in the presence of obtained aqueous phase yielded 33.43% higher fraction of hydrocarbons than the pure water HTL and 7.70-17.01% higher hydrocarbons when compared with ethanol and glycerol HTL respectively. Nitrogen containing compounds, such as phenols and furfurals, for biocrudes obtained from all HTL processes, were found to be present in the range of 8.30-14.40%.

Organo‐Soluble Colloidal MoS2 Quantum Dots (QDs) as an Efficient Photocatalyst for α‐Amino Phosphonate Synthesis

Abstractα‐Amino phosphonates are bio‐isosteres of amino acids and have numerous biochemical activities. While they are generally prepared via carbon–phosphorus bond formation using a plethora of methods but using recyclable photo‐catalysts and readily accessible amine and phosphites are not commonly used in synthesis. Herein, we used organo‐soluble MoS2 Quantum Dots (QDs) as an exceptionally efficient nano‐photocatalyst for the synthesis of α‐amino phosphonates. Our approach emphasizes on photocatalysis within organic media, providing a facile and effective method for conducting these intricate organic conversions under mild conditions. This straightforward process harnesses the power of molecular oxygen (O2) as an oxidizing agent. To elaborate, our method is intricately guided by the inherent capability of MoS2 QDs to enter an excited state upon absorption of blue light. This excited state bears appropriate potential energy to initiate the formation of reactive iminium ion species from N‐phenyl benzylamine, thus driving the desired product formation. Mechanistic analysis has also unveiled the pivotal role of MoS2 QDs in generating reactive superoxide radicals from O2 through single electron transfer (SET), underscoring their significance in the process. Remarkably, this photocatalytic transformation furnishes a diverse array of functionalized products, expanding its applicability and potential implications in various contexts.

HFIP‐Mediated Cyclodesulfurization Approach for the Synthesis of 2‐Aminobenzoxazole and 2‐Aminobenzothiazole Derivatives

A straightforward strategy for the synthesis of pharmaceutically active 2‐aminobenzoxazoles and 2‐aminobenzothiazoles is described by using 2‐aminophenols, 2‐aminothiophenols, and functionalized phenylisothiocyanates as the model substrates. The developed method proceeds through the HFIP‐promoted cyclodesulfurization process which allows for the efficient synthesis of these scaffolds at 60 °C of reaction temperature without the addition of a transition metal‐catalyst or hazardous solvents with excellent yields (up to 92%) of product formation. This process involves HFIP‐mediated hydrogen bonding interactions with the hydroxyl and thiol moieties, leading to bond breaking and formation during the reaction, resulting in the compounds of interest and the in situ release of H2S gas.

Electrospray ionization tandem mass spectrometry of 4-aryl-3,4-dihydrocoumarins.

We have investigated the gas-phase fragmentation reactions of 11 synthetic 4-aryl-3,4-dihydrocoumarins by electrospray ionization tandem mass spectrometry (ESI-MS/MS) on a quadrupole-time-of flight (Q-TOF) hybrid mass spectrometer. We have also estimated thermochemical data for the protonated coumarins (precursor ion A) and product ion structures by computational chemistry at a B3LYP level of theory to establish the ion structures and to rationalize the fragmentation pathways. The most abundant ions in the product ion spectra of coumarins 1-11 resulted from C8H8O2, CO2, C4H4O3, C8H10O3, C8H8O2, and CH3OH eliminations through retro-Diels-Alder (RDA) reactions, remote hydrogen rearrangements (β-eliminations), and β-lactone ring contraction. Although the investigated coumarins shared most of the fragmentation pathways, formation of a benzylic product ion and its corresponding tropylium ion was diagnostic of the substituents at ring C. The thermochemical data revealed that the nature and position of the substituents at ring C played a key role in the formation of this product ion and determined its relative intensity in the product ion spectrum. The results of this study contribute to knowledge of the gas-phase ion chemistry of this important class of organic compounds.

Fenfuro®-mediated arrest in the formation of protein-methyl glyoxal adducts: a new dimension in the anti-hyperglycemic potential of a novel fenugreek seed extract

The fenugreek plant (Trigonella foenum-graecum) is traditionally known for its anti-diabetic properties owing to its high content of furostanolic saponins, which can synergistically treat many human ailments. Non-enzymatic protein glycation leading to the formation of Advanced Glycation End products (AGE) is a common pathophysiology observed in diabetic or prediabetic individuals, which can initiate the development of neurodegenerative disorders. A potent cellular source of glycation is Methyl Glyoxal, a highly reactive dicarbonyl formed as a glycolytic byproduct. We demonstrate the in vitro glycation arresting potential of Fenfuro®, a novel patented formulation of Fenugreek seed extract with clinically proven anti-diabetic properties, in Methyl-Glyoxal (MGO) adducts of three abundant amyloidogenic cellular proteins, alpha-synuclein, Serum albumin, and Lysozyme. A 0.25% w/v Fenfuro® was able to effectively arrest glycation by more than 50% in all three proteins, as evidenced by AGE fluorescence. Glycation-induced amyloid formation was also arrested by more than 36%, 14% and 15% for BSA, Alpha-synuclein and Lysozyme respectively. An increase in MW by attachment of MGO was also partially prevented by Fenfuro® as confirmed by SDS-PAGE analysis. Glycation resulted in enhanced aggregation of the three proteins as revealed by Native PAGE and Dynamic Light Scattering. However, in the presence of Fenfuro®, aggregation was arrested substantially, and the normal size distribution was restored. The results cumulatively indicated the lesser explored potential of direct inhibition of glycation by fenugreek seed in addition to its proven role in alleviating insulin resistance. Fenfuro® boosts its therapeutic potential as an effective phytotherapeutic to arrest Type 2 diabetes.

Oxidative hydrolysis of aliphatic bromoalkenes: scope study and reactivity insights.

We have developed an operationally simple method for the synthesis of dialkyl α-bromoketones from bromoalkenes by utilizing a hypervalent iodine-catalyzed oxidative hydrolysis reaction. This catalytic process provides both symmetrical and unsymmetrical dialkyl bromoketones with moderate yields across a broad range of bromoalkene substrates. Our studies also reveal the formation of Ritter-type side products by an alternative reaction pathway.

Influence of the barrier layer on the electrical properties of the V/Al-based Ohmic contact on n-type high-Al-fraction AlGaN

Influence of the barrier layer on the electrical properties of V/Al-based Ohmic contact is investigated by comparing the surface morphology and alloying results of V/Al/Ni/Au (with barrier Ni) and V/Al/Cr/Au (with barrier Cr) contacts on n-AlGaN (Al molar fraction>60%) after 850 °C annealing. Due to the clustering of Ni during annealing, a thin Al layer (AlOx) and a number of Al-Au alloy clusters are formed at the contact interface of n-AlGaN, which increases the contact resistance of the V/Al/Ni/Au Ohmic contacts. In contrast, the annealed V/Al/Cr/Au electrodes cover the surface uniformly, which not only contributes to the increased contact area, but also suppresses the formation of high resistance products. Thanks to the Cr barrier layer, the specific contact resistivity of V/Al-based Ohmic contact is reduced by 26%.

Mechanistic Insights into Oxidation of Benzaldehyde by Co-Peroxo Complexes.

Transition metal-peroxide complexes play a crucial role as intermediates in oxidation reactions. To unravel the mechanism of benzaldehyde oxidation by the Co-peroxo complex, we conducted density functional theory (DFT) calculations. The identified competing mechanisms include nucleophilic attack and hydrogen atom transfer (HAT). The nucleophilic attack pathway involves Co-O cleavage and nucleophilic attack, leading to the formation of the benzoate product. And the HAT pathway comprises O-O cleavage and HAT, ultimately resulting in the benzoate product. DFT calculations revealed that the formation of the end-on Co-superoxo complex 2 through Co-O cleavage, starting from the side-on Co-peroxo complex 1, is much more favorable than the formation of the two-terminal oxyl-radical intermediate 3 through O-O cleavage. Compared with the nucleophilic attack of benzaldehyde by 2, the abstraction of a hydrogen atom from benzaldehyde by 3 requires higher energy. The nature of the nucleophilicity of 2 and 3 accounts for the reactivity of the reaction.

Optimizing the Flow Electrooxidation of Glycerol Using Statistical Design of Experiments

Many studies have investigated the conversion of biomass derivatives to value-added products. However, the influence of different factors on the reaction outcomes of these often-complex systems is not well understood. Herein, a statistical design of experiments—specifically, response surface methodology—is applied to the glycerol electrooxidation reaction in a flow electrolyzer. Four operational variables (glycerol concentration, NaOH concentration, flow rate, and catalyst loading) were investigated for their effects on measurable responses of the electrochemical reaction: current density and Faradaic efficiency to a given product. Independent optimizations of current density and Faradaic efficiency, as well as simultaneous optimization of both, were investigated. Each optimization was evaluated using response surface coefficients to analyze sensitivity and simulated runs to visualize the parameter space. These evaluations revealed contradictions in operating conditions required to simultaneously maximize current density and Faradaic efficiency to C3 products glycerate and lactate, leading to low current densities and Faradaic efficiencies. However, simultaneously maximizing current density and Faradaic efficiency to C1 product formate led to high current densities and Faradaic efficiencies. These insights guide tuning GEOR production to maximize overall reactor performance. Furthermore, this study outlines a framework for experimental evaluation and optimization of other electrolysis chemistries.

Au-Cu dual-single-atom sites on Bi2WO6 with oxygen vacancy for CO2 photoreduction towards multicarbon products

CO2 photoreduction into high-value-added C2+ products struggles with energetic challenges in forming critical intermediates and multiple C−C bonds. Herein, an effectively synthesized photocatalyst, Bi2WO6 nanosheets with oxygen vacancies anchoring Au and Cu dual single atoms on the surface, can convert CO2 and H2O vapour into C3H6 and C2H4. The high product selectivity of 18.2 % for C3H6 and 65.4 % for total C2+ hydrocarbons are achieved under concentrated light irradiation (2.4 W·cm−2). Au-Cu dual-single-atom sites and defect engineering strategies exhibit synergistic effects on optimizing the reaction thermodynamics and charge kinetics for CO2 conversion. Theoretical calculations provide reference values for reaction pathways of C3H6 and C2H4 formation, with the C−C couplings being potential determining steps of multicarbon product formation. Our work offers a promising strategy with a combination of concentrated light irradiation technology and catalyst modification to achieve high selectivity of C2+ products.

Theoretical Study on Photo‐induced Copper Autoredox Construction of Chiral Amines

Density functional theory (DFT) calculations were conducted to investigate the photo‐induced copper‐catalyzed C‐N coupling reaction for the synthesis of chiral tertiary amines. The ligands' effects on the metal center and the factors determining regioselectivity in chiral tertiary amine formation were examined. The computational results revealed that the oxidative quenching process involved in the photocatalytic redox cycle via Cu I‐Cu I*‐Cu II‐Cu III transitions. Throughout the reaction, four key processes occurred: C‐Br bond activation, ligand exchange, amide ion/Br ion exchange, and C‐N coupling. Among these steps, alkyl radical generation through single electron transfer was identified as the rate‐determining step with an energy barrier of 13.9 kcal/mol. The chelating diphosphine ligand improved copper's reducibility and its capacity to activate the C‐Br bond by charge transfer when exposed to visible light (CT). Copper's own redox process was facilitated by interactions between diphosphine and diamine ligands. Finally, when combined with oxygen, this catalyst system formed a chiral plane Cu II‐O 1‐N 1‐N 2‐N 3 essential for enantioselective product formation.

Conformational rigidity of cytochrome c'-α from a thermophile is associated with slow NO binding

Cytochromes c′-α are nitric oxide (NO)-binding heme proteins derived from bacteria that can thrive in a wide range of temperature environments. Studies of mesophilic Alcaligenes xylosoxidans cytochrome c′-α (AxCP-α) have revealed an unusual NO-binding mechanism involving both heme faces, in which NO first binds to form a distal hexa-coordinate Fe(II)-NO (6cNO) intermediate and then displaces the proximal His to form a proximal penta-coordinate Fe(II)-NO (5cNO) final product. Here, we characterize a thermally stable cytochrome c′-α from thermophilic Hydrogenophilus thermoluteolus (PhCP-α) to understand how protein thermal stability affects NO binding. Electron paramagnetic and resonance Raman spectroscopies reveal the formation of a PhCP-α 5cNO product, with time-resolved (stopped-flow) UV-vis absorbance indicating the involvement of a 6cNO intermediate. Relative to AxCP-α, the rates of 6cNO and 5cNO formation in PhCP-α are ∼11- and ∼13-fold lower, respectively. Notably, x-ray crystal structures of PhCP-α in the presence and absence of NO suggest that the sluggish formation of the proximal 5cNO product results from conformational rigidity: the Arg-132 residue (adjacent to the proximal His ligand) is held in place by a salt bridge between Arg-75 and Glu-135 (an interaction not present in AxCP-α or a psychrophilic counterpart). Overall, our data provide fresh insights into structural factors controlling NO binding in heme proteins, including 5cNO complexes relevant to eukaryotic NO sensors.

Geopolymer composites for marine application: Structural properties and durability

In marine environments, traditional ordinary Portland cement (OPC) and reinforced concrete structures are prone to corrosion, reducing their durability and service life dramatically. Geopolymers, with exceptional corrosion resistance, have great value and application potential in marine engineering. This paper presents a comprehensive overview of the research advances on geopolymer cements and concretes in marine environments in terms of mechanical properties, durability, and structural properties. The research so far has demonstrated that geopolymers exhibit superior mechanical properties and durability due to their denser interface and lower porosity compared to OPC. However, geopolymers have significant brittleness defects, and their performance in marine environments, especially in splash and tidal zones with alternating wet and dry conditions, is severely affected. This is due to the influence of chloride ions, divalent cations, pH, and sulfate in seawater, which promote or inhibit the formation and transformation of reaction products and microstructures, thereby affecting their mechanical properties and stability. Nevertheless, the use of composite technologies such as modified precursors, fibers, and nanomaterials has a positive effect on enhancing their structural properties and durability. This provides guidance and solutions for the application of high-durability, low-carbon emission, and more sustainable building materials in maritime engineering.

Characterization and impact of oxygenates in post-consumer plastic waste-derived pyrolysis oils on steam cracking process efficiency

Mechanical recycling of mixed packaging waste has limitations due to challenging separation into pure polyolefin streams which often leads to low quality recyclates. A solution to improve overall recycling rates of polyolefins is chemical recycling. One promising approach is conversion into a liquid product via pyrolysis and subsequent steam cracking of the pyrolysis oil towards light olefins. In this study, distilled fractions of pyrolysis oils from PE and PP-rich waste were characterized via GC × GC including normal and reversed-phase column configurations with a special focus on oxygenated components. Distilled pyrolysis oils were subsequently steam cracked in 20/80 weight‐based blends with conventional naphtha. All pyrolysis oil samples contained substantial amounts of oxygenates (1–10 wt%) which poses a huge challenge for steam cracker feedstocks and it was found that ketones are the most prevailing oxygenate group. Steam cracking experiments showed slightly increased ethylene yields of the blends compared to pure fossil naphtha, with the PE-derived samples outperforming the PP-derived samples. Furthermore, diesel-range distillation cuts led to higher formation of heavy products compared to the naphtha-range cuts. Increased formation of CO was observed as a consequence of the substantial oxygen contamination which can be a deal-breaker in industrial steam crackers. This work shows that distilled pyrolysis oils with conventional naphtha are promising steam cracking feedstocks if intermediate processing steps are performed to remove the oxygenates and other impurities using, for instance, hydrotreatment. With the findings of this work, such upgrading processes can be designed in a more effective way.

Decorated and sculpted zeolitic imidazolate frameworks for electrocatalytic carbon dioxide reduction to formate

The production of value-added chemicals using electrocatalytic CO2 reduction (ECR) is an effective strategy to achieve “carbon neutrality”. However, highly formate-selective production with zinc-based catalysts in ECR systems remains a challenge. In this work, a macroporous hollow nanocage structure was successfully created through the etching of zeolitic imidazolate frameworks (ZIFs) using phytic acid (PA). The surface of the hollow nanocage was then adorned, leading to the formation of a hybrid superstructure product (ZIF-P5/In) with a substantial surface area, enabling effective ECR to formate. The Faraday efficiency of ZIF-P5/In for formate is 80.2 % at −1.26 VRHE. This feasible strategy is expected to provide new insights into the preparation of highly efficient ZIF-derived electrocatalysts.

Segmentation and Classification of Fission as Pores in Reactor Iirradiated Annular U[sbnd]10Zr Metallic Fuel Using Machine Learning Models

Metallic fuels, particularly U10Zr, are promising candidates for next-generation sodium-cooled fast reactors. Irradiation of nuclear fuels in reactors can lead to the formation of solid and gas fission product which subsequently forms microstructural pores, deteriorating fuel performance. Due to the massive amount of pores and complex phases formed, a quantitative description of fission gas pores is not yet available, preventing the development of microstructure-informed fuel performance modeling for fuel qualification. This paper applied a pre-trained deep learning model to ∼10,260 high magnification scanning electron microscopy images. This method increased the accuracy of fission gas pore segmentation and allows statistical features to be extracted which cannot be achieved manually. A pre-trained decision tree model worked on the segemenation resutls and further classified the pores into different categories to produce a correlation between the pores, movement of lanthanides, and temperature gradient during irradiation. This paper emphasizes the potentials of machine learning models to accelerate fuel research, development, and qualification for advanced reactors.

Revealing the structural evolution of CuAg composites during electrochemical carbon monoxide reduction

Comprehending the catalyst structural evolution during the electrocatalytic process is crucial for establishing robust structure/performance correlations for future catalysts design. Herein, we interrogate the structural evolution of a promising Cu-Ag oxide catalyst precursor during electrochemical carbon monoxide reduction. By using extensive in situ and ex situ characterization techniques, we reveal that the homogenous oxide precursors undergo a transformation to a bimetallic composite consisting of small Ag nanoparticles enveloped by thin layers of amorphous Cu. We believe that the amorphous Cu layer with undercoordinated nature is responsible for the enhanced catalytic performance of the current catalyst composite. By tuning the Cu/Ag ratio in the oxide precursor, we find that increasing the Ag concentration greatly promotes liquid products formation while suppressing the byproduct hydrogen. CO2/CO co-feeding electrolysis and isotopic labelling experiments suggest that high CO concentrations in the feed favor the formation of multi-carbon products. Overall, we anticipate the insights obtained for Cu-Ag bimetallic systems for CO electroreduction in this study may guide future catalyst design with improved performance.