Primary Field Research Articles

Black flowers and real forms of higher spin symmetries

Using Chern-Simons formulation, we investigate higher spin (HS) black holes in AdS3 with soft Heisenberg hair and establish linkage with the real forms of the underlying complexified gauge symmetries taken here as SL(N, ℂ)L × SL(N, ℂ)R. We study the various conserved currents characterizing the HS black flowers (HS-BF) and show that they can be formed of layers indexed by the elements of the centre of the gauge symmetry. This feature follows from requiring the holonomy of the asymptotic gauge connection around the thermal cycle to sit in the centre ℤN of the symmetry group. With regard to the compact subgroups of the real forms of the complexified gauge symmetry, we calculate the entropies of the HS-BF and verify that, unless we are considering trivial holonomies, there are no continuous paths joining the HS-BF to the core spin 2 black holes. As explicit illustrations, we give quantum field realisations of the soft Heisenberg hair in terms of bosonic and fermionic primary conformal fields and compute the HS-BF entropy as a function of the number of fermions occupying the ground state of the Heisenberg soft hair.

Integrated experimental and thermodynamic modelling study of phase equilibria in the “CuO0.5”-PbO-CaO system in equilibrium with Cu/Pb metal

Phase equilibria studies were undertaken on the “CuO0.5”-PbO-CaO system in equilibrium with Cu/Pb metal as part of the integrated experimental and thermodynamic modelling study of phase equilibria in the Cu-Pb-Zn-Fe-Ca-Si-Al-Mg-O-S-(As, Sn, Sb, Bi, Ag, Au, Ni, Cr, Co and Na) gas/oxide liquid/matte/speiss/metal/solids system in support of the development and optimisation of pyrometallurgical processes. The equilibration and quenching technique followed by the electron probe X-ray microanalysis (EPMA) was used in the present study. The primary phase fields of massicot (PbO), copper plumbite (Cu2PbO2), cuprite (Cu2O) and lime (CaO) were experimentally characterised. The experimental data obtained in the present study, as well as available literature data on the phase equilibria and thermodynamics of the “CuO0.5”-PbO-CaO system in equilibrium with Cu/Pb were used for the optimisation of the model parameters of the discussed system in agreement with the Cu-Pb-Zn-Fe-Ca-Si-Al-Mg-O-S-(As, Sn, Sb, Bi, Ag, Au, Ni, Cr, Co and Na) gas/oxide liquid/matte/speiss/metal/solids system to obtain a self-consistent set of parameters of the thermodynamic model for all phases. The predicted liquidus surface of the “CuO0.5”-PbO-CaO system was presented for the first time in the complete range of temperatures and compositions.

Mathematical theory and CFD solutions for internal convective cooling of gas turbine blades highlighting the effects of rotation

A quasi-one-dimensional mathematical theory is developed for determining the effects of rotation on the fluid flow and heat transfer in a cooling channel within a rotating gas turbine blade. The three-dimensional intricacies in the solutions of the same problem are captured through accurate computational fluid dynamic simulations. The derived analytical closed-form solutions predict the amount by which the relative total temperature of the coolant changes as a result of rotation. It is shown that such changes due to rotation are significant proportion of the change of coolant temperature due to heat transfer. The computed spatial evolutions of the primary velocity field, secondary velocity field and the force fields are presented as the coolant progresses from the inlet to the outlet so that the complexities and subtleties are exposed to a high degree of visualizability. Detailed considerations to various components of the centrifugal, Coriolis and pressure forces are given. The flow field is shown to depend strongly on whether the coolant moves in the spanwise outward or inward direction. The three-dimensionality of the flow field is reflected in complex circumferential variations of the blade temperature and the internal heat transfer coefficient. When the effects of the x–component of the Coriolis force interacts non-linearly with the effects of the z–component of the centrifugal force and a drastic x-gradient in fluid density due to a thin thermal boundary layer, then the primary velocity profile may exhibit great complexity, including flow separation. The present paper thus captures the strong, non-linear, two-way coupling between the fluid dynamics and heat transfer in the internal convective cooling occurring in a channel within a rotating gas turbine blade. Based on about 100 three-dimensional computational fluid dynamics simulations, new heat transfer correlations are developed for average Nusselt number for a rotating channel that will be of practical use.

Pilot Study: Use of Stem Cell Therapy and Diced Cartilage in Secondary Rhinoplasty Cases Clinical Outcomes: The Golden Turkish Delight.

Although many techniques in the secondary rhinoplasty field have been developed in recent years, there are debates regarding achieving results with a high satisfaction rate. We aimed to share the surgical use technique in secondary rhinoplasty patients by enriching the Turkish delight technique with mesenchymal stem cells, which we described as the golden Turkish delight (GTD) technique, and the long-term patient satisfaction results. The study was planned as prospective research, and 30 secondary rhinoplasty patients who presented to our service for rhinoplasty were included. The GTD technique was applied to these patients. The patient's satisfaction with the surgical procedure was evaluated at least 9-12 months after the surgery, and the Global Aesthetic Improvement Scale (GAIS) was used as a measurement tool. Of the participants, the satisfaction levels of 30 patients were evaluated with a 1-year follow-up on average, and the rate of those who improved was found to be 80% using the GAIS score. The rate of those with high GAIS scores and those with high satisfaction levels was approximately 56%. Twenty percent of the patients were not satisfied with the result. When we evaluate the postoperative 1-year results of our patients in terms of satisfaction and complications, we may state that the absorption that may occur in the Turkish delight technique over time could give better results with the GTD technique. In addition to GTD and fat graft support, regenerative medicine products such as stromal vascular fraction are very effective in obtaining favorable results.

Geospatial Analysis of Tsunami Hazards and Mitigation Strategies

Abstract Indonesia has experienced its deadliest disasters named tsunamis, particularly since the devastating earthquakes in Aceh and Yogyakarta. The Sunda Strait region and its surrounding areas, located in the Megathrust zone of western Java, are especially vulnerable to tsunami events. Geospatial technology’s advancement offers disaster mitigation strategies with potential for loss reduction. This research aims to analyze tsunami hazards and its mitigation using geospatial approach. We focused on Pagelaran Sub-District in Pandeglang Regency, Banten, Indonesia. Secondary sources and field checks provide research data on hazards and tsunami evacuation routes. We used several data such as slope, coastlines, elevation, river and road networks, as well as land use. Analysis was carried out employing weighting, scoring, overlay, and network techniques. Tsunami hazard is categorized in three categories ie. low, medium, and high. In Tegalpapak, Margagiri, and Margasana villages, a total residential area of 34.93 hectares places these villages in a high vulnerability category. The fastest evacuation route covers 1 km in 2.41 minutes (Margagiri Village). Efforts to mitigate tsunami risk include identifying and mapping potential threats, community outreach, enhanced spatial planning, and placement of evacuation signs.

Independence and synergy of spatial attention in the two visual systems of jumping spiders.

By selectively focusing on a specific portion of the environment, animals can solve the problem of information overload, toning down irrelevant inputs and concentrating only on the relevant ones. This may be of particular relevance for animals such as the jumping spider, which possess a wide visual field of almost 360° and thus could benefit from a low-cost system for sharpening attention. Jumping spiders have a modular visual system composed of four pairs of eyes, of which only the two frontal eyes (i.e., AMEs) are motile, whereas the other secondary pairs remain immobile. We hypothesized that jumping spiders can exploit both principal and secondary eyes for stimulus detection and attentional shift, with the two systems working synergistically. In Experiment 1 we investigated AMEs' attentional responses following a spatial cue presented to the secondary eyes. In Experiment 2, we tested for enhanced attention in the secondary eyes' visual field congruent with the direction of the AMEs' focus. In both experiments, we observed that animals were faster and more accurate in detecting a target when it appeared in a direction opposite to that of the initial cue. In contrast with our initial hypothesis, these results would suggest that attention is segregated across eyes, with each system working on compensating the other by attending to different spatial locations.

Anesthesiological Preoperative Interview with a Palliative Care Patient: A Simulation-Based Experiment Using Standardized Patients.

Background and Objectives: Anesthesiologists come into contact with patients under palliative care in different clinical settings. They also routinely encounter these patients in their primary field of work, the operating room. Patients receiving palliative care who are scheduled for surgery will pose unique challenges in perioperative management, often presenting with advanced disease and with different psychosocial and ethical issues. This study aims to evaluate whether anesthesiologists without specialty training in palliative medicine will spot perioperative challenges presented by patients under palliative care and address them adequately. Materials and Methods: In this study, we simulated a preoperative anesthesiological interview using standardized patients and anesthesiologists (specialists as well as trainees). The standardized patients were asked to represent a patient under palliative care in need of surgery because of a mechanical ileus. We conducted 32 interviews, dividing the anesthesiologists into two groups. In one group, the standardized patients were instructed to address four problems, i.e., use of a port catheter for anesthesia, nausea and vomiting, pain medication, and an advance directive including a limitation of treatment (DNR-order). In the other group, these problems were also present, but were not actively addressed by the standardized patients if not asked for. The interviews were recorded, transcribed, and then analyzed. Results: In most cases, the medical problems were spontaneously identified and discussed. In only a few cases, however, was a therapy recommendation made for improved symptom control. The advance directive was spontaneously discussed by only 3 of the 32 (9%) anesthesiologists. In another 16 cases, the advance directive was discussed at the request of the standardized patients. The limitation of treatment stayed in place in all cases, and the discussion of the advance directives remained short, with an average duration of just over 5 min. Conclusions: In this study, the complex problems of patients under palliative care are not sufficiently taken into account in a preoperative anesthesiological interview. To improve treatment of the medical problems, therapists who have palliative medicine expertise, should be involved in the perioperative medical care, ideally as a multi-professional team. The discussion about perioperative limitations of treatment should be held beforehand, for example, as part of a structured advanced care planning discussion.

Bonner sphere measurements of high-energy neutron spectra from a 1 GeV/u 56Fe ion beam on an aluminum target and comparison to spectra obtained by Monte Carlo simulations

The goal of this work is to characterize the secondary neutron spectra produced by 1 GeV/u56Fe beam colliding with a thick cylindric aluminum target and to perform a quantitative comparison with simulated results obtained with Monte Carlo codes. The measurements were performed using extended-range Bonner sphere spectrometers at two positions (15° and 40°) with respect to the beam direction. The secondary radiation field was simulated using four Monte Carlo codes (FLUKA, MCNP6, Geant4 and PHITS) and several physical models of nuclei transport and interaction. Neutron and proton energy distributions were simulated for the experimental measurement positions. The simulated neutron spectra, together with data measured with Bonner sphere spectrometers, after carrying out the correction of the contributions induced by the secondary protons, were used as input for the MAXED spectrum unfolding code to obtain the measured neutron spectra. Unfolded neutron spectra were compared with simulated ones to carry out a quantitative analysis of the performance of the chosen Monte Carlo codes and their corresponding physical models. This comparison showed that, because of experimental uncertainties and physical models, there are no unique solutions for each measurement location, but a range of solutions where the true experimental neutron spectra probably lie. The results showed deviations between 4.23% and 8.42% for some simulated spectra. Regarding the total integral values of neutron fluence and ambient equivalent dose, the unfolded neutron spectra showed deviations lower than 2%.

Deep Reinforcement Learning for Fluid Mechanics: Control, Optimization, and Automation

A comprehensive review of recent advancements in applying deep reinforcement learning (DRL) to fluid dynamics problems is presented. Applications in flow control and shape optimization, the primary fields where DRL is currently utilized, are thoroughly examined. Moreover, the review introduces emerging research trends in automation within computational fluid dynamics, a promising field for enhancing the efficiency and reliability of numerical analysis. Emphasis is placed on strategies developed to overcome challenges in applying DRL to complex, real-world engineering problems, such as data efficiency, turbulence, and partial observability. Specifically, the implementations of transfer learning, multi-agent reinforcement learning, and the partially observable Markov decision process are discussed, illustrating how these techniques can provide solutions to such issues. Finally, future research directions that could further advance the integration of DRL in fluid dynamics research are highlighted.

Silane modified Cr2O3/polyimide nanocomposite films with excellent surface insulation performance for space applications

The exploration of deep space significantly increases the probability of spacecraft failures due to surface electrostatic discharge, which imposes higher vacuum insulation protection requirements on polyimide (PI), the external insulation material of spacecrafts. To address this challenge, this study proposes using silane coupling agent KH550 for organic grafting treatment of Cr2O3nanoparticles, which are then used to dope and modify PI to enhance the vacuum surface insulation of PI films. The KH550 grafting improves the interface strength between the fillers and the matrix, allowing the fillers to be uniformly dispersed in the matrix. Compared to pure PI films, the prepared PI-Cr2O3@KH550 composite films exhibit significantly enhanced vacuum surface flashover voltage, improved surface/volume resistivity, and dielectric properties. The results demonstrate that PI composite films with 0.8% by mass of Cr2O3@KH550 show the most notable performance improvement, with the DC flashover voltage and impulse flashover voltage in vacuum increasing by 20.7% and 27.8%, respectively. The doping of chromium oxide nanoparticles introduces more deep traps into the PI films and reduce the surface resistivity. The higher deep trap density inhibits charge migration, thereby alleviating secondary electron emission and surface electric field distortion. Simultaneously, the lower surface resistivity facilitates dissipating surface charges and improves the surface insulation. These findings are of significant reference value for promoting the enhancement of aerospace insulation performance.

Efficient numerical simulation method for nonlinear guided wave in frequency domain

Abstract Nonlinear ultrasonic guided wave has attracted increasing attention for its ultra-sensitive to detect the incipient damages in service material by analyzing the amplitude of second harmonic wave. However, the mainstream method of simulating the second harmonic generation (SHG) in nonlinear material is using finite element method with time-domain solver, which is extremely time-consuming and can hardly simulate the huge and complex structures. In this paper, we propose a flexible finite element method based on frequency solver to simulate the SHG. The primary wave field, the second harmonic wave field and the static component field are separately set. This method is realized in Comsol Multiphysics software, the case of the SHG in plate indicates that the calculation efficiency has been significantly improved in compare with the time domain solver, whereas the results of time-domain solver and frequency domain solver have good agreement with each other. This method can be easily applied in the SHG analysis in huge and complex structures. Moreover, the primary wave field, the second harmonic wave field and the static component field can be respectively presented in the post-processing to help provide more information about physical insight of SHG.

Islam Nusantara vs Progressive Islam: Dynamics and Transformation in the Modern Context of Indonesia

This journal explores the comparative dynamics and transformative processes of Islam Nusantara and Progressive Islam within the modern Indonesian context. Islam Nusantara, rooted in local traditions and cultural syncretism, emphasizes moderation, tolerance, and integration with indigenous practices. In contrast, Progressive Islam focuses on rationalism, reform, and socio-political activism, drawing from contemporary interpretations of Islamic teachings. This study examines the historical evolution, theological foundations, and socio-political implications of both movements, highlighting their respective responses to global challenges and local contexts. By analyzing primary sources, field studies, and interviews with key figures, this research elucidates the complexities and intersections between these two paradigms. The findings reveal how Islam Nusantara and Progressive Islam shape Indonesian Muslim identity, influence public discourse, and contribute to the broader narrative of Islamic thought in the 21st century. This study provides a nuanced understanding of the ongoing negotiation between tradition and modernity in Indonesian Islam, offering insights into the future trajectories of these influential movements.

Direct measurement of forces in air-based acoustic levitation systems.

Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces). Current experimental techniques for obtaining these force fields are not well-suited for mapping the primary force field at high spatial resolution and cannot directly measure the secondary scattering force. Here, we introduce a method that can measure both acoustic forces in situ, including secondary forces in the near-field limit between arbitrarily shaped, closely spaced objects. Operating similarly to an atomic force microscope, the method inserts into the acoustic cavity a suitably shaped probe tip at the end of a long, flexible cantilever and optically detects its deflection. This makes it possible to measure forces with a resolution better than 50 nN and also to apply stress or strain in a controlled manner to manipulate levitated objects. We demonstrate this by extracting the acoustic potential present in a levitation cavity, directly measuring the acoustic scattering force between two objects, and applying tension to a levitated granular raft of acoustically bound particles in order to obtain the force-displacement curve for its deformation.

Active control of noise radiated from a long cylinder: Can the Nyquist limitation be broken?

In the present paper, we consider active control of noise propagating from a long cylinder. For that purpose control sources are distributed on the external surface of the cylinder. They provide a secondary sound field which enables them to compensate for the noise field propagating outside. To implement active noise control, we apply an approach based on the Calderón potentials that have the projection property. Numerical simulations to attenuate broadband noise with different numbers of control sources per wavelength are carried out. The effect of the cylinder on the Green's function and consequent noise attenuation is studied. There are two key findings in this paper. First, the results demonstrate that the level of relative noise attenuation remarkably increases along with the growth of the distance. Second, it is shown that even less than two control sources per wavelength can provide essential noise cancelation. At first glance, this result contradicts the well-known Nyquist-Shannon sampling theorem. A theoretical explanation of this result is provided.

Design and modeling of indirectly driven magnetized implosions on the NIF

The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion, where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requirements to achieve this state. The design of recent NIF magnetized hohlraum experiments is presented. These are close to earlier shots in the three-shock, high-adiabat (BigFoot) campaign, subject to the constraints that magnetized NIF targets must be fielded at room-temperature, and use ≲1 MJ of laser energy to avoid the risk of optics damage from stimulated Brillouin scattering. We present results from the original magnetized hohlraum platform, as well as a later variant that gives a higher hotspot temperature. In both platforms, imposed fields (at the capsule center) of up to 28 T increase the fusion yield and hotspot temperature. Integrated radiation-magneto-hydrodynamic modeling with the Lasnex code of these shots is shown, where laser power multipliers and a saturation clamp on cross-beam energy transfer are developed to match the time of peak capsule emission and the P2 Legendre moment of the hotspot x-ray image. The resulting fusion yield and ion temperature agree decently with the measured relative effects of the field, although the absolute simulated yields are higher than the data by 2.0−2.7×. The tuned parameters and yield discrepancy are comparable for experiments with and without an imposed field, indicating the model adequately captures the field effects. Self-generated and imposed fields are added sequentially to simulations of one BigFoot NIF shot to understand how they alter target dynamics.

Enhancing capture efficiency of drug-carrier particles in the carotid sinus by utilizing a combination of magnetic fields: A numerical approach

Magnetic drug targeting is a relatively new method to treat vascular occlusion in different body parts. However, the effectiveness of this method can be affected due to the severity and location of the occlusion. This can lead to the injection of high dosages of drugs, which can cause serious side effects due to the deposition of drugs in unwanted parts. To mitigate these effects, this study investigates the potential of a guiding magnetic field in enhancing drug absorption for vascular occlusion treatment. The method relies on guiding magnetic nanoparticles (NPs) loaded with drugs toward the occlusion site using two external magnetic fields. Blood flow was modeled as non-Newtonian, considering shear-rate-dependent viscosity and unsteady at the inlet. To test this idea, a computational fluid dynamic (CFD) coupled with a discrete phase model (DPM) approach has been employed to simulate drug delivery in three-vessel structures with varying degrees of occlusion (45 %, 60 %, and 90 %). To avoid the escape of drug carriers, a secondary magnetic field was applied at the bifurcation point to direct the NPs to the site of blockage where the primary magnetic field acts. Then, the states with or without a guiding source at the bifurcation site are compared based on the capture efficiency of each structure. The simulation demonstrated a significant increase in NP capture at the target site, ranging from 2 % to 15 %, depending on the NP size. However, the severity of occlusion substantially impacted the secondary magnetic field's effectiveness. In the 90 % occlusion scenario, the method's efficiency decreased significantly from 26 % to 16 % for NP sizes exceeding 1.5μm. This study highlights the potential of guiding magnetic fields in improving drug delivery to target sites in vascular occlusion.

Analytical seismic model for a tunnel with segmental liner buried in the half-space soil

In this paper, by using the wave function expansion (WFE) and the expansion of the cylindrical wave into plane wave (ECPW) methods, an analytical method for the dynamic response of a circular tunnel with segmental liner buried in the half-space soil to harmonic elastic waves is developed. The liner of the tunnel is supposed to consist of several segments and joints. Both the segments and joints are treated as open cylindrical shells, and the segment and joint shells together thus form an equivalent continuous shell (ECS) liner, and the thin shell theory is utilized to describe its vibration. The scattered wave field due to the presence of the tunnel and boundary of the half-space soil is divided into two parts, namely, the direct scattered wave field and secondary scattered wave field. The expressions for the direct scattered cylindrical waves in the soil is determined via the WFE method, while the secondary scattered waves form the boundary of the half-space soil are obtained by the ECPW method together with the application of the boundary condition along the soil surface. Applying the cylindrical shell theory on the ECS liner and using the Fourier series expansions for the variables and parameters of the ECS liner along the azimuthal direction together with introducing the Fourier component constitutive relation for the ECS liner, a system of equations for the Fourier component ECS displacements are derived with the differential equations for the ECS liner displacements. By using the system of equations, the expressions for the free and scattered wave fields and the continuity conditions at the interface between the liner and soil, the system of equations for the ECS liner coupled with the soil are derived. By using the developed analytical method for the tunnel, some results of the ECS tunnel under different incident waves are given.

Calibration method for AC electromagnetic positioning systems distorted by eddy currents

Electromagnetic positioning technologies are frequently-used in surgical navigation systems to achieve precise position of surgical instruments in bodies. Still, in operating rooms with complex environments, they would be disturbed by eddy currents of metals. This paper explores a calibration method to mitigate eddy current interference. Initially, The study examined the generation mechanisms of eddy currents and established the expression of secondary magnetic fields they produced, which exhibited a 90-degree phase difference with the AC excitation field. Subsequently, an integral calibration method was proposed, leveraging fields’ distinct phases for separating. Through simulation, various metal materials were modeled to study their impact on magnetic fields. The effectiveness of the calibration method was evaluated by comparing positioning accuracy before and after calibration. Results demonstrated over 80 % average calibration efficiency, effectively mitigating errors induced by metals and enhancing the system’s reliability. This calibration method is crucial for the broader application of electromagnetic positioning systems.

Effect of process parameters on the mechanical properties of wires produced from A356 aluminum alloy chips by Continuous Friction Stir Extrusion: Experiments and numerical simulation

Recycling of metals is becoming crucial from an economic and environmental point of view. The solid-state recycling process Continuous Friction Stir Extrusion was used to produce wires out of A356-T6 chips. The mechanical properties of the produced wires were explored by varying the main process parameters. Characterization involved Vickers hardness tests, tensile tests, grain size measurements, and fracture surface analysis. It has been found that it is possible to achieve 77 % of the Ultimate Tensile Strength (UTS) and 92 % of Vickers hardness with respect to the as-fabricated A356 alloy. The average grain size increases with the tool rotational with values ranging from about 9 µm to about 11 µm. A 3D dedicated numerical model was used to predict the distributions and histories of primary field variables, and to calculate the Piwnik-Plata parameter, fostering a more in-depth understanding of the process mechanics. This allows for the precise prediction of unacceptable product quality of the bonding when the Plata and Piwnik parameters are low. Predicted temperature close to the rotating tool should reach 400 °C while the cochlea temperature should be below 100 °C for sound wires production thus avoiding early chip bonding and process failure.

Wave solutions in nonlocal integral beams

Wave propagation in slender beams is addressed in the framework of nonlocal continuum mechanics. The elastodynamic problem is formulated exploiting consistent methodologies of pure integral, mixture and nonlocal strain gradient elasticity. Relevant wave solutions are analytically provided, with peculiar attention to reflection and near field phenomena occurring in presence of boundaries. Notably, the solution field is got as superimposition of incident, reflected, primary near field and secondary near field waves. The latter contribution represents a further effect due to the size dependent mechanical behaviour. Limit responses for vanishing nonlocal parameter are analytically evaluated, consistently showing a zero amplitude of the secondary near field wave. Parametric analyses are carried out to show how length scale parameter, amplitude of incident wave and geometric and elastic properties of the beam affect the amplitudes of reflected, primary near field and secondary near field waves. The results obtained exploiting different nonlocal integral elasticity approaches are compared and discussed.