Primary Colors Research Articles

Single-layer waveguide with compound metasurfaces for highly efficient and chromatic-aberration-free augmented reality near-eye displays

Augmented reality (AR) near-eye displays seamlessly integrate virtual information with real world, in which the optical waveguide is the key component functioned as a coupler. Due to strong chromatic aberration, independent waveguides are always indispensable to separate the three primary colors that inevitably brings larger and thicker appearance. To address this, this paper proposes a new chromatic-aberration-free single-layer waveguide for AR displays by integrating a double-layer grating metasurface (MS) and the covered cylindrical MSs. The double-layer grating MS breaks through the limitations on a narrow wavelength band, enabling high diffraction efficiency for incident light deflection across the entire visible spectrum. Further, the cylindrical MSs provide accurate control over incident angles, not only overcoming the challenge of total reflection but also effectively eliminating chromatic aberration. Design results show that the proposed structure achieves an impressive diffraction efficiency of over 80 % for blue and green light and over 90 % for red light with an outstanding diffraction angular difference lower than 2.5 deg. Real-time ray tracing simulation demonstrates the capability of the designed AR engine to achieve high-resolution full-color imaging. The compound MSs enable precise light and color control for a single-layer waveguide coupler with exceptional diffraction efficiency and minimal chromatic aberration, which show great potential for cutting-edge AR applications.

Novel yellowish-green single-phased spinel Mg1-xBaxAl2O4:Mn2+ phosphor(s) for color rendering white-light-emitting diodes.

For white light-rendering research activities, interpretation by using colored emitting materials is an alternative approach. But there are issues in designing the white color emitting materials. Particularly, differences in thermal and decay properties of discrete red, green, and blue emitting materials led to the quest for the search of a single-phased material, able to emit primary colors for white light generation. The current study is an effort to design a simple, single-phase, and cost-effective material with the tunable emission of primary colors by a series of Mg1-xBaxAl2O4:Mn2+ nanopowders. Doping of manganese ion (Mn2+) in the presence of the larger barium cation (Ba2+) at tetrahedral-sites of the spinel magnesium aluminate (MgAl2O4) structure led to the creation of antisite defects. Doped samples were found to have lower bandgaps compared with MgAl2O4, and hybridization of 3d-orbitals of Mn2+ with O(2p), Mg(2s)/Al(2s3p) was found to be responsible for narrowing the bandgap. The distribution of cations at various sites at random results in a variety of electronic transitions between the valance band and oxygen vacancies as well as electron traps produced the antisite defects. The suggested compositions might be used in white light applications since they have three emission bands with centers at 516 nm (green), 464 nm (blue) and 622 nm (red) at an excitation wavelength of 380 nm. A detailed discussion to analyze the effects of the larger cationic radius of Ba2+ on the lattice strain, unit cell parameters, and cell volumes using X-ray diffraction analysis is presented.

Consumer Preferences for Food Logos

Consumer preference for food logos is a major area of research in the field of marketing psychology. In this study, we further explore consumer preferences for food logos across four elements--color red vs. green, complementary vs. analogous, words vs. no words, and circular vs. angular edges. Participants were given a survey of 30 questions to evaluate eight sets of logos. The results of this study suggest that logos with red as their primary color are preferred over logos where green is predominant, while logos with brand names are preferred over logos without.

Full-Color "Off-On" Thermochromic Fluorescent Fibers for Customizable Smart Wearable Displays in Personal Health Monitoring.

Responsive thermochromic fiber materials capable of miniaturization and integrating comfortably and compliantly onto the soft and dynamically deforming human body are promising materials for visualized personal health monitoring. However, their development is hindered by monotonous colors, low-contrast color changes, and poor reversibility. Herein, full-color "off-on" thermochromic fluorescent fibers are prepared based on self-crystallinity phase change and Förster resonance energy transfer for long-term and passive body-temperature monitoring, especially for various personalized customization purposes. The off-on switching luminescence characteristic is derived from the reversible conversion of the dispersion state and fluorescent emission by fluorophores and quencher molecules, which are embedded in the matrix of a phase-change material, during the crystallizing/melting processes. The achievement of full-color fluorescence is attributed to the large modulation range of fluorescence colors according to primary color additive theory. These thermochromic fluorescent fibers exhibit good mechanical properties, fluorescent emission contrast, and reversibility, showing their great potential in flexible smart display devices. Moreover, the response temperature of the thermochromic fibers is controllable by adjusting the phase-change material, enabling body-temperature-triggered luminescence; this property highlights their potential for human body-temperature monitoring and personalized customization. This work presents a new strategy for designing and exploring flexible sensors with higher comprehensive performances.

Achieving Visible-Light-Excitable Blue TADF-Type Afterglow via Delicate Control of Excited States in Difluoroboron β-Diketonate Systems.

Blue afterglow constitutes of one of the primary afterglow colors and can convert into other afterglow colors through energy transfer. The reported studies show the fabrication of blue afterglow emitters, but most of them are formed by room-temperature phosphorescence mechanism and require UVB lights as excitation source (these high-energy lights may damage organic systems). Here we report visible-light-excitable blue thermally activated delayed fluorescence type (TADF-type) afterglow materials via delicate control of excited states in difluoroboron β-diketonate (BF2bdk) systems. Tiny change of the substituents in BF2bdk system has been found to pose significant influence on excited state energy levels and consequently narrow the singlet-triplet splitting energy of the system. As a result, both forward and reverse intersystem crossing have been accelerated, leading to the emergence of BF2bdk's TADF-type organic afterglow in rigid crystalline matrices. The resultant TADF-type afterglow materials exhibit emission lifetimes of several hundred milliseconds, photoluminescence quantum yield (PLQY) of 24.7 % and display temperature responsive property.

The Role of Anions in Rare-earth Activated Inorganic Host Materials for its Luminescence Characteristics.

This work is inspired from the comprehensive work done by our research team aimed at improving the efficiency of white light emitting diodes (LEDs) through improvements in the colour rendering index of the red light (CRI), one of the primary colours of white light. Such work is triggered through the incorporation of anions (BO33-, PO43-, SO42-), either individually or as an integral part of dopant activated inorganic phosphor host materials. Numerous host materials such as ZnO, Y2O3, Ca3(PO4)2, CaMoO4, ABPO4, ABSO4 (where A represents alkali metals and B alkaline earth metals) have been considered ideal hosts materials for studying luminescence properties of materials(including other phosphors). In addition, red emitting dopants such as Sm3+, Eu3+ and Ce3+ have been incorporated into these host materials to achieve a higher CRI of red colour, an essential component of white light. The role anions in various materials is multifaceted; firstly, it acts as sensitizer whereby it absorbs excitation energy and transfers it non-radiatively to the dopants, secondly, it acts as a charge compensator to dopants with a charge of + 3, thirdly, it creates crystal fields that affects the electronic transitions of the dopants and fourthly, it creates a stable crystal structure that allows for dopant embedding. By understanding the exact role of these anions and their interactions with the host lattice and dopant ions, we could further optimize the luminescent properties of these activated host materials, which leads to higher efficiencies and performances in white light-emitting diodes and other lighting technologies. This work is a comprehensive review of the work undertaken by our research team aimed at enhancing the luminescent properties of WLEDs.

Chameleon-inspired supramolecular materials based on cucurbit[7]uril and viologens exhibiting full-color tunable photochromic behavior

Inspired by Chameleons' skin color tuning in response to environmental changes, we design and prepare three inclusion complexes based on the cucurbit[7]uril (Q[7]) host and three viologen guests. Upon light irradiation, the colors of these inclusion complexes in the solid state turn from light colors to vivid three primary colors, i.e., red, green, and blue, respectively. Ultraviolet–visible (UV–vis) diffuse reflectance and electron spin resonance (ESR) spectra reveal that the photochromism can be attributed to the generation of viologen radicals, originating from the photoinduced electron transfer. The results of quantum chemical calculation indicate that Q[7] in the inclusion complexes acts as the electron donor in the photoinduced electron transfer process. Using a color mixing approach and finely manipulating the proportions of the three inclusion complexes, a series of composite photochromic materials (CPMs) can be manufactured, covering a full-color gamut in visible light. On the other hand, due to the ignorable size and shape change of CPMs during the photochromatic processes, the CPMs-based reversible photochromic “printing” and photofading “erase” properties were also used for quick response (QR) code. Therefore, these prominent intelligent features of CPMs open new avenues to explore optical regulated nano-platforms for multiple anti-counterfeiting, biomimetics, and military camouflage applications.

CHROMATIC CHRONICLES: EXPLORING THE SYMBOLISM AND SIGNIFICANCE OF COLOR IN ANURAG KASHYAP'S FILMS

Filmmaker Anurag Kashyap is known for his unique and gritty approach to storytelling, which often explores the inner lives of individuals while also presenting the harsh realities of the world outside. Most notable aspects of Kashyap's cinematic approach are his dexterous use of color as a narrative instrument, visually assisting storytelling and conveying deeper meanings. This research paper investigates the significance of color in the films of Anurag Kashyap, concentrating on the analysis of five selected films: "Black Friday" (2004), "Dev. D" (2009), "Gulaal" (2009), "That Girl in Yellow Boots" (2010), and "Bombay Velvet" (2015). The purpose of this research is to investigate the color signature and symbolisms used in Kashyap's films, as well as analyze the significant use of primary colors in various scenes. By analyzing the specific color palettes and combinations utilized, the researcher will try to understand how Kashyap effectively employs colors to emphasize key moments and themes of his films. To justify the study’s objectives, qualitative content analysis methodology is employed, involving a systematic viewing and analysis of each film. Color occurrences will be recognized, coded, and categorized to reveal their symbolic meanings. A comparative analysis will be conducted to identify similarities and differences in the films' use of color. The results of this study will illuminate the aesthetic and narrative significance of color in Kashyap's filmmaking, explaining how color choices enrich the depiction of emotions, themes, and character dynamics. This research is significant because it reveals Kashyap's distinctive aesthetic philosophy via an examination of the symbolism embedded in his use of color. This study enriches our appreciation and interpretation of Anurag Kashyap's films by clarifying the symbolic representations and visual storytelling strategies he employs in them.

Enhancement of light emission of a low-resistivity silicon nanocrystal thin film: A simulational and experimental study

A silicon nanocrystal (Si NC) white light-emitting (λ = ∼400–900 nm) thin film with a relatively low resistivity of 1.6 × 104 Ω m has been prepared as an active medium for electrically driven Si light sources. The average size of Si NC is 2.4 ± 0.4 nm. To enhance the light emission efficiency of this low-resistivity Si NC thin film, approach of hydrogen passivation suitable for the traditional high-resistivity (1.2 × 107 Ω m in this work for example) red light-emitting Si NC thin film has been tried and found unavailable unfortunately. Our first principles simulation shows that Si NCs bonded to −O, −NH2, −OH, and −H ligands are responsible for red, green, and blue (RGB) primary color emissions in this white light-emitting sample, respectively. Passivation of the sample in NH3 and H2O atmosphere is then conducted, aiming to increase the number of the RGB light emitters. The light emission is significantly enhanced, with photoluminescence intensity, photoluminescence quantum yield, electroluminescence intensity, and net optical gains increased by factors of 4.6, 4.2, 4.0, and ∼3.0, respectively, after 10-day passivation. Further enhancements are expected for longer passivation.

Comparison of Visual Functions and Ocular Health in Children with Autism Spectrum Disorder versus Typically Developing Peers

PURPOSE: To compare the visual functions and ocular health between children with Autism Spectrum Disorder and Typically Developing Peers. METHOD: A comparative cross-sectional study was conducted in different autistic centers to evaluate the visual functions and ocular health of 80 individuals in which 40 were diagnosed with ASD and 40 were typically developing. Different tests were carried out to assess visual functions in which visual acuity was tested by Snellen chart, contrast sensitivity on Pelli-Robson, color vision by primary colors detection and visual field by handheld peripheral field perimeter. Ocular health was checked by ocular examination of individuals. RESULTS: Out of 40 children with ASD, 15(37.5%) had VA≤ 0.5. 19(23.75%) had reduced contrast sensitivity. 3(3.75%) had some color vision defect. Out of 40 TD peers, 17(42.5%) had VA≤ 0.5. 17(21.25%) had reduced contrast sensitivity. All TD peers had normal color vision. Both groups had 2(2.50%) individuals with reduced field. While checking ocular health of ASD group, only 20 had some ocular health problems in which 7(8.75%) had strabismus, 3(3.75%) had eye movement disorders, 2(2.50%) had hypertelorism and ptosis respectively and 1(1.25%) had nystagmus. Similarly, in TD group, 16 had ocular problems in which 6(7.50%) had strabismus, 2(2.50%) had hypertelorism, 1(1.25%) had ptosis and eye movement disorders respectively. The statistical test was performed by using Mann Whitney test and Chi-square test (p value ≤ 0.05). CONCLUSION: There was no significant difference in visual functions and ocular health of children who had ASD and TD Peers.

An Electrochromic Displays Comprising The Three Primary Cyan Magenta and Yellow Colors Under Juxtaposed and Stacked Architectures

AbstractColor reproduction through subtractive synthesis is achieved by combining the three primary colors cyan, magenta, and yellow (CMY). Three CMY electroactive polymers are selected, synthesized, and first, integrated into monochromatic electrochromic devices (pixels) similar to electrochemical cells. In order to develop innovative trichromatic devices, new pixel architectures are proposed and compared. In particular, the stacking of the three monochromatic CMY electrochromic devices in a single system is declined in the form of three different electrochemical cells, which differ in the nature and positioning of the counter‐electrode. Overall performances are finally evaluated in terms of range and ease of assembly. The architecture with common counter‐electrode is clearly the one that offers the best potential for the development of electrochromic devices to reproduce a wide range of colors.

Intermediate Color Emission via Nanographenes with Organic Fluorophores

AbstractPhotoluminescence (PL) color can be tuned by mixing fluorophores emitting the three primary colors in an appropriate ratio. When color tuning is achieved on a single substrate, we can simplify device structures. We demonstrated that nanographenes (NGs), which are graphene fragments with a size of tens of nanometers, could be utilized as carriers of fluorophores. The addition of red‐ and blue‐light‐emitting fluorophores on the edge successfully reproduced the purple light. The relative PL intensities of the fluorophores could be regulated by the excitation wavelength, enabling multicolor emission between blue and red light. Owing to the triphenylamine units of the fluorophores, the NGs showed PL enhancement due to aggregation. This characteristic was valuable for the fabrication of solid polymer materials. Specifically, the functionalized NGs can be dispersed into polyvinylidene difluoride. The resultant polymer films emitted red, blue, and purple color. Our study demonstrated the potential applicability of NGs for fluorophore carriers capable of reproducing intermediate colors of light.

Intermediate Color Emission via Nanographenes with Organic Fluorophores.

Photoluminescence (PL) color can be tuned by mixing fluorophores emitting the three primary colors in an appropriate ratio. When color tuning is achieved on a single substrate, we can simplify device structures. We demonstrated that nanographenes (NGs), which are graphene fragments with a size of tens of nanometers, could be utilized as carriers of fluorophores. The addition of red- and blue-light-emitting fluorophores on the edge successfully reproduced the purple light. The relative PL intensities of the fluorophores could be regulated by the excitation wavelength, enabling multicolor emission between blue and red light. Owing to the triphenylamine units of the fluorophores, the NGs showed PL enhancement due to aggregation. This characteristic was valuable for the fabrication of solid polymer materials. Specifically, the functionalized NGs can be dispersed into polyvinylidene difluoride. The resultant polymer films emitted red, blue, and purple color. Our study demonstrated the potential applicability of NGs for fluorophore carriers capable of reproducing intermediate colors of light.

Machine learning-assisted image label-free smartphone platform for rapid segmentation and robust multi-urinalysis.

This study presents a groundbreaking approach for the early detection of chronic kidney disease (CKD) and other urological disorders through an image-label-free, multi-dipstick identification method, eliminating the need for complex machinery, label libraries, or preset coordinates. Our research successfully identified reaction pads on 187 multi-dipsticks, each with 11 pads, leveraging machine learning algorithms trained on human urine data. This technique aims to surpass traditional colourimetric methods and concentration-colour curve fitting, offering more robust and precise community screening and home monitoring capabilities. The developed algorithms enhance the generalizability of machine learning models by extracting primary colours and correcting urine colours on each reaction pad. This method's cost-effectiveness and portability are significant, as it requires no additional equipment beyond a standard smartphone. The system's performance rivals professional medical equipment without auxiliary lighting or flash under regular indoor light conditions, effectively managing false positives and negatives across various categories with remarkable accuracy. In a controlled experimental setting, we found that random forest algorithms, based on a Bagging strategy and applied in the HSV colour space, showed optimal results in smartphone-assisted urinalysis. This study also introduces a novel urine colour correction method, significantly improving machine learning model performance. Additionally, ISO parameters were identified as crucial factors influencing the accuracy of smartphone-based urinalysis in the absence of additional lighting or optical configurations, highlighting the potential of this technology in low-resource settings.

9-bit spin- and wavelength-encoded hologram using a hybrid metasurface.

Metasurface holographic encryption, with high resolution and strong concealment, is promising for information security. However, traditional metasurface holographic encryption is limited by spin-polarization channels and monochromaticity, restricting the level of security and information capacity. In this Letter, we propose a 9-bit spin- and wavelength-encoded hologram achieved by encoding phase and amplitude information into full spin polarization and primary color channels using a hybrid metasurface. Our hybrid metasurface structure can break the limitations of traditional metasurfaces, significantly increasing the number of encoded channels by an order of magnitude. We believe that this strategy can provide a new, to the best of our knowledge, approach to high-capacity information encoding and encryption.

Silk‐Based Functional Inks with Color‐Tunable Light Upconversion for Printing on Arbitrary Surfaces

AbstractA biocompatible and versatile silk‐based functional ink with hydrophilic upconversion nanoparticles (UCNPs) that can be printed or painted on arbitrary substrates, including biological surfaces is demonstrated. Hydrophilic UCNPs, ready to be dispersed in aqueous silk fibroin solution, are synthesized in large quantities via facile hydrothermal synthesis using citric acid. Based on a systematic study of dopant control to achieve robust red emission from citrate‐capped UCNPs, three primary colors are obtained, which serve as the basis for the expansion of the color palette. The synthesized UCNPs are homogeneously dispersed in regenerated silk fibroin solutions derived from Bombyx mori cocoons to produce water‐based functional inks. Cyan, magenta, and yellow (CMY) inks are created by combining red, green, and blue (RGB) inks. Demonstrator devices, where a variety of colorful patterns and codes are revealed only under near‐infrared irradiation, are realized through stencil printing or brush painting on flexible polymer films, fruit, leaves, silkworm cocoons, and pig skin. The patterns and codes are highly heat resistant (≈230 °C) and can be easily washed off with water after use. The printable/paintable inks and functions proposed here will provide new opportunities for applications where sustainability, biocompatibility, and intentional luminescence are simultaneously required.

Verification of uncertainty estimates of autonomous field measurements of marine reflectance using simultaneous observations

The primary ocean color product is the spectrum of remote sensing reflectance RRS that allows the quantification of in-water optically significant constituents and all ocean color applications. The determination of its uncertainties is thus key to the creation of comprehensive uncertainty budgets for all derived ocean color products. The assessment of satellite RRS uncertainties has largely relied on corresponding field measurements but this process is solid only if these field measurements are in turn fully characterized. Uncertainty budgets have therefore been defined and reported for the radiometric measurements collected in the framework of the Ocean Color component of the Aerosol Robotic Network (AERONET-OC). The contemporaneous deployment of two autonomous systems for 5.5 years on the Acqua Alta Oceanographic Tower (AAOT) located in the northern Adriatic Sea led to the collection of 4,449 pairs of coincident observations (collected with a time difference lower than 10 min) distributed over 659 days of data acquisitions that can be used to verify reported uncertainty values. The comparison of matched pairs showed a good agreement for RRS (with differences of typically 2%–3% between 412 and 560 nm), as well as for the aerosol optical thickness τa (3%–6%). Differences between data from the two systems appear generally consistent with their stated uncertainties, indicating that they are metrologically compatible and that uncertainties reported for AERONET-OC data are usually trustworthy (with possible exceptions depending on the level of error correlation between measurements from the two systems). Using uncertainty cone diagrams, this result holds across the range of uncertainty values with few exceptions. Independent uncertainty estimates associated with non-systematic error contributions were obtained using a collocation framework allowing for error correlation between measurements from the two systems. The resulting uncertainties appeared comparable with the reported values for τa and RRS. The related mathematical development also showed that the centered root-mean-square difference between data collected by two systems is a conservative estimate of the uncertainty associated with these data (excluding systematic contributions) if these data show a good agreement (expressed by a slope of method II regression close to 1) and if their uncertainties can be assumed similar with errors moderately correlated (typically lower than 0.5).

MiR156b-targeted VvSBP8/13 functions downstream of the abscisic acid signal to regulate anthocyanins biosynthesis in grapevine fruit under drought.

Anthocyanins are the primary color components of grapevine berries and wines. In cultivation practices, a moderate water deficit can promote anthocyanin accumulation in red grape skins. Our previous study showed that abscisic acid (ABA) plays a key role in this process. Herein, we identified a microRNA, vv-miR156b, that is generated in grapevine berries in response to drought stress, along with increasing anthocyanin content and biosynthetic structural gene transcripts. In contrast, vv-miR156b short tandem target mimic (STTM) function-loss callus exhibits the opposite phenotype. Results from in vivo and in vitro experiments revealed that the ABA-signaling-regulated transcription factor VvAREB2 binds directly to the ABA-responsive element (ABRE) of the MIR156b promoter and activates miR156b expression. Furthermore, two miR156b downstream targets, VvSBP8 and VvSBP13, exhibited reduced grape anthocyanin content in their overexpressors but there was a contrary result in their CRISPR-edited lines, the decrease in anthocyanin content was rescued in miR156b and SBP8/13 double overexpressors. We further demonstrated that both VvSBP8 and VvSBP13, encoding transcriptional repressors, displayed sufficient ability to interact with VvMYC1 and VvMYBA1, thereby interfering with MYB-bHLH-WD (MBW) repeat transcriptional complex formation, resulting in the repression of anthocyanin biosynthesis. Our findings demonstrate a direct functional relationship between ABA signaling and the miR156-SBP-MBW complex regulatory module in driving drought-induced anthocyanin accumulation in grape berries.

ПИРОТЕХНИЧЕСКИЕ СОСТАВЫ КРАСНО-СИНЕЙ ЦВЕТОВОЙ ГАММЫ

In civil pyrotechnics, great priority in the development of pyrotechnic compositions is given to fireworks compositions. Along with the main subjective characteristics of any fireworks display - colorfulness and entertainment, the variety of colors is important. Classically, the primary colors used in such pyrotechnic products are red, yellow, green and blue. However, the color palette of fireworks compositions is much wider and new color solutions are required to increase the entertainment value of firework displays. Of particular interest is the development of pyrotechnic compositions in the field of transitional colors. The most spectacular, and therefore the most popular and expensive, are fireworks of purple and violet shades, representing the red-blue color scheme: lilac, purple, violet. Currently, more than forty formulations of pyrotechnic compositions are known, which, when burned, formed flames of these shades. All these compositions are developed on the basis of the composition of red fire with the introduction of an additive that colors the flame blue. Using the example of the composition of lilac fire, the work shows the possibility of obtaining pyrotechnic tribes of transitional colors by mixing pyrotechnic compositions having different emission spectra. A new technology for these compositions has been proposed by rolling followed by molding by continuous pressing. It has been shown that the main color characteristics of compositions prepared using the new technology are not inferior to compositions processed using traditional powder technology. It has been established that the color characteristics of the flame obey the basic laws of mixing monochromatic radiation. The presented results of research into pyrotechnic compositions of red and blue colors based on cellulose nitrates, a copolymer of polyvinyl chloride with vinylacetate, as well as ammonium perchlorate, produced by blind and through pressing methods, can contribute to a significant expansion of the color range of pyrotechnic compositions, unification of technologies and reduction in the cost of fireworks.

Construction and Efficacy Verification of Color Theory Optimization Model in AI Painting Assistant

Abstract The application of artificial intelligence in the field of painting has been greatly developed, which is a new way of thinking in the digital era, bringing innovation and infinite possibilities to the art of painting. The article first researches the art and expression of AI painting, mainly taking various network models as the main form of expression. Then, color theory and color space are introduced to provide a theoretical basis for the proposal of a color optimization model. Considering that the ACE algorithm has problems of high complexity and image enlargement, the acceleration algorithm LLLUT is used to improve data processing. The AI imitation painting works “Monet’s Garden” and “Neon” are taken as case studies. In terms of color preference, AI painting prefers to use three primary colors: black, white, and red. For example, AI’s imitation painting work Han Xizai Night Banquet has three peak points higher than the average peak, respectively 0.04, 0.09, 0.15, and 0.99. The corresponding colors used are red, black, and yellow. The main colors used in the composition are red and yellow. In the application evaluation of the color model, the comparative analysis concludes that the color mixing efficiency is higher using the research method in this paper, and in the practical application, both painting professionals and amateurs have a stable effectiveness in generating color preference schemes after using the AI painting assistant based on the ACE color model optimized by LLLUT.