Pressure Resistance Research Articles

Is the persistence of Listeria monocytogenes in food processing facilities and its resistance to pathogen intervention linked to its phylogeny?

The foodborne pathogen Listeria monocytogenes is differentiated into four distinct lineages which differ in their virulence. It remains unknown, however, whether the four lineages also differ with respect to their ability to persist in food processing facilities, their resistance to high pressure, a preservation method that is used commercially for Listeria control on ready-to-eat meats, and their ability to form biofilms. This study aimed to determine differences in the pressure resistance and biofilm formation of 59 isolates of L. monocytogenes representing lineages I and II. Furthermore, the genetic similarity of 9 isolates of L. monocytogenes that were obtained from a meat processing facility over a period of 1 year and of 20 isolates of L. monocytogenes from food processing facilities was analyzed to assess whether the ability of the lineages of L. monocytogenes to persist in these facilities differs. Analysis of 386 genomes with respect to the source of isolation revealed that genomes of lineage II are over-represented in meat isolates when compared with clinical isolates. Of the 38 strains of Lm. monocytogenes that persisted in food processing facilities (this study or published studies), 31 were assigned to lineage II. Isolates of lineage I were more resistant to treatments at 400 to 600 MPa. The thickness of biofilms did not differ between lineages. In conclusion, strains of lineage II are more likely to persist in food processing facilities while strains of lineage I are more resistant to high pressure.IMPORTANCEListeria monocytogenes substantially contributes to the mortality of foodborne disease in developed countries. The virulence of strains of four lineages of L. monocytogenes differs, indicating that risks associated with the presence of L. monocytogenes are lineage specific. Our study extends the current knowledge by documentation that the lineage-level phylogeny of L. monocytogenes plays a role in the source of isolation, in the persistence in food processing facilities, and in the resistance to pathogen intervention technologies. In short, the control of risks associated with the presence of L. monocytogenes in food is also lineage specific. Understanding the route of contamination L. monocytogenes is an important factor to consider when designing improved control measures.

Abdominal Congestion as a Predictor of Worsening Renal Function in Patients With Acute Decompensated Heart Failure.

Worsening renal function is a frequent finding in patients with acute decompensated heart failure (ADHF) and is a powerful independent prognostic factor for adverse outcomes. The link between abdominal congestion and worsening renal function in such patients is not yet fully addressed. To evaluate the role of abdominal congestion in the early prediction of worsening renal function in hospitalized patients with acute decompensated heart failure. This was a prospective study that enrolled 100 patients with a diagnosis of ADHF and received intravenous diuretic therapy. Intra-abdominal pressure (IAP), splenic Doppler impedance indices and serum prouroguanylin were measured on admission, 24 h after admission and on discharge. Patients were then divided into 2 groups: those who developed WRF (WRF group), and those who did not (non-WRF group). Worsening renal function was defined as an increase in serum creatinine level ≥0.3 mg/dL above baseline admission value. Intrabdominal pressure was measured transvesically using standard Foley catheter. Splenic Doppler impedance indices (resistivity and pulsatility indices) were measured using splenic Doppler ultrasound. Among recruited patients (age: 54.73 ± 13.1 years, 72% are male), there was a significant decline in IAP (6.67 mmHg vs 8.36 mmHg, p = 0.001) and significant rise in splenic resistivity index (0.69 vs 0.67, p = 0.002) before discharge compared to admission values. The median level of serum prouroguanylin before discharge showed significant decline compared to admission level (29.2 vs 34.6 ng/l, p = 0.006). WRF developed in 37 (37%) patients. Independent predictors of WRF during hospitalization were high splenic arterial resistivity index 24 h after admission, high intra-abdominal pressure (≥8 mmHg) 24 h after admission, and low LVEF on admission. In ADHF patients receiving diuretic therapy, transvesical measurement of intra-abdominal pressure and splenic resistivity index by splenic Doppler early after admission can help to identify patients at increased risk of WRF near discharge.

UiO-66-NH2/hydrothermal carbon nanocomposite assembled mesh membrane with photocatalytic self-cleaning and antibacterial properties for on-demand oily wastewater separation

The poor wettability, limited permeation flux and unsatisfactory anti-fouling property of oil/water separation membranes significantly hinder their practical application. This study developed a novel UiO-66-NH2/hydrothermal carbon@stainless steel mesh (UiO/HC@SSM) membrane, fabricated through a straightforward dip-coating strategy that offers membrane thickness control. The resulting membrane exhibited superhydrophilic/underwater superoleophobic property and high porosity, enabling gravity-driven separation of emulsified and stratified oil/water mixtures on-demand with high separation efficiency and superior flux. Specifically, UiO/HC@SSM-5 (dip-coating five times) showed ultrahigh permeate fluxes of 51428–56425 L m−2 h−1 for stratified oil/water mixtures separation, and UiO/HC@SSM-10 exhibited interface demulsification and gravity separation ability for emulsified oil/water mixtures with high fluxes of 4050–4504 L m−2 h−1. Notably, UiO/HC nanocomposite endowed the membrane with exceptional photocatalytic self-cleaning and antibacterial activities, effectively addressing both oil and microbial fouling. High-viscosity crude oil fouling can be light-induced decontaminated from the composite membrane surface with superior flux recovery ratio (FRR) up to 97 %. The as-prepared UiO/HC@SSM also exhibited near-complete bacterial inactivation activity after 10 min of visible light irradiation. Encouragingly, UiO/HC@SSM demonstrated superior separation and photocatalytic capabilities compared to UiO@SSM, attributed to the dual promoting role of cost-effective hydrothermal carbon in hydrophilicity and photoelectric properties. Moreover, UiO/HC modified SSM membrane displayed robust chemical and mechanical stability, coupled with superior harsh environments and oil pressure resistances. This membrane, boasting desirable wettability, high permeability, exceptional photocatalytic activity, and excellent stability, offers a reliable solution for treating complex oily wastewater. Additionally, the demulsification and photocatalysis mechanisms of UiO/HC@SSM membrane were examined in depth. This study holds significant potential in advancing the development of novel SSM membranes functionalized with MOF/carbon material, thereby enhancing their practical applications in purifying oily wastewater.

Numerical simulation of the influence of nasal cycle on nasal airflow

To study the characteristics of nasal airflow in the presence of nasal cycle by computational fluid dynamics. CT scan data of a healthy Chinese individual was used to construct a three-dimensional model of the nasal cavity to be used as simulation domain. A sinusoidal airflow velocity is set at the nasal cavity entrance to reproduce the breathing pattern of a healthy human. There was a significant difference in the cross-sectional area between the two sides of the nasal cavity. Particularly, the decongested side is characterized by a larger cross-section area, and consequently, by a larger volume with respect to the congested side. The airflow velocity, pressure, and nasal resistance were higher on the congested narrow side. The temperature regulation ability on the congested narrow side was stronger than that on the decongested wider side. During the nasal cycle, there are differences in the nasal cavity function between the congested and decongested sides. Therefore, when evaluating the impact of various factors on nasal cavity function, the nasal cycle should be considered.

Pressure resistance characterisation of vascular networks embedded in carbon composites for high energy physics applications

In state-of-the-art tracking detectors, lightweight carbon composite structures support the pixel or micro-strip sensors and provide the main thermal path between the silicon and a network of metallic or plastic pipes containing a cooling fluid. Despite the good results obtained with this design approach, the challenges associated with future high energy physics (HEP) experiments demand even lighter and more efficient technologies. In this regard, replacing the existing piping with a network of channels directly embedded in the composite laminates represents a promising solution to improve the thermal coupling, which also offers additional gains in terms of mass and thermo-elastic stability.While some research has been devoted to assessing the mechanical and thermal performance of such laminates, limited information about their resistance to internal pressure is currently available in the literature. This lack of data constitutes an important obstacle for the use of vascular networks in future HEP applications, which the present paper aims to address.Experimental methods were used to investigate the pressure resistance of channels embedded in carbon composite laminates. Modified poly (lactic) acid (PLA) preforms were embedded in carbon-fibre epoxy laminates. A post-cure vaporization technique removed the PLA, thus producing plates with longitudinal channels. Destructive tests were conducted to determine the burst pressure of the plates depending on the lay-up and the cross-section geometry of the channels. Both circular and oblong channels were evaluated, and various reinforcement techniques were explored to enhance the pressure resistance of the laminates. Micro-graphic examinations and X-ray micro-computed tomography were employed to gain a better understanding of the microstructure and the failure mechanisms of the plates.Plates with circular channels measuring 1.75 mm in diameter, embedded in [0/90/0]S laminates and reinforced with 2 mm lay length fuzzy carbon fibre over-braids, achieved burst pressures exceeding 45 MPa. This result, which is approximately an order of magnitude greater than that obtained for the equivalent non-reinforced laminates, demonstrates the enormous potential of this technology for future particle detectors.

Continuous Monitoring of Advanced Hemodynamic Parameters during Hemodialysis Demonstrated Early Variations in Patients Experiencing Intradialytic Hypotension.

Intradialytic hypotension (IDH) is a severe complication of hemodialysis (HD) with a significant impact on morbidity and mortality. In this study, we used a wearable device for the continuous monitoring of hemodynamic vitals to detect hemodynamic changes during HD and attempted to identify IDH. End-stage kidney disease patients were continuously monitored 15 min before starting the session and until 15 min after completion of the session, measuring heart rate (HR), noninvasive cuffless systolic and diastolic blood pressure (SBP and DBP), stroke volume (SV), cardiac output (CO), and systemic vascular resistance (SVR). Data were analyzed retrospectively and included comparing BP measured by the wearable devices (recorded continuously every 5 s) and the cuff-based devices. A total of 98 dialysis sessions were included in the final analysis, and IDH was identified in 22 sessions (22.5%). Both SBP and DBP were highly correlated (r > 0.62, p < 0.001 for all) between the wearable device and the cuff-based measurements. Based on the continuous monitoring, patients with IDH had earlier and more profound reductions in SBP and DBP during the HD treatment. In addition, nearly all of the advanced vitals differed between groups. Further studies should be conducted in order to fully understand the potential of noninvasive advanced continuous monitoring in the prediction and prevention of IDH events.

Factors associated with renal oxygen extraction in mechanically ventilated children after the Norwood operation: insights from high fidelity haemodynamic data.

Maintaining the adequacy of systemic oxygen delivery is of utmost importance, particularly in critically ill children. Renal oxygen extraction can be utilised as metric of the balance between systemic oxygen delivery and oxygen consumption. The primary aim of this study was to determine what clinical factors are associated with renal oxygen extraction in children after Norwood procedure. Mechanically ventilated children who underwent Norwood procedure from 1 September, 2022 to 1 March, 2023 were identified as these patients had data collected and stored with high fidelity by the T3 software. Data regarding haemodynamic values, fluid balance, and airway pressure were collected and analysed using Bayesian regression to determine the association of the individual metrics with renal oxygen extraction. A total of 27,270 datapoints were included in the final analyses. The resulting top two models explained had nearly 80% probability of being true and explained over 90% of the variance in renal oxygen extraction. The coefficients for each variable retained in the best were -1.70 for milrinone, -19.05 for epinephrine, 0.129 for mean airway pressure, -0.063 for mean arterial pressure, 0.111 for central venous pressure, 0.093 for arterial saturation, 0.006 for heart rate, -0.025 for respiratory rate, 0.366 for systemic vascular resistance, and -0.032 for systemic blood flow. Increased milrinone, epinephrine, mean arterial pressure, and systemic blood flow were associated with decreased (improved) renal oxygen extraction, while increased mean airway pressure, central venous pressure, arterial saturation, and systemic vascular resistance were associated with increased (worsened) renal oxygen extraction.

#2539 Effects of relative blood volume and ultrafiltration volume on pulse wave characteristics during hemodialysis

Abstract Background and Aims Measures of non-invasive pulse wave (PW) analysis can help to assess the status of the central cardiovascular system and to predict clinical outcomes, including morbidity and mortality. During hemodialysis (HD), fluid is extracted from blood. The resulting reduction in relative blood volume (RBV) and collected ultrafiltration volume (UFV) were hypothesized to substantially influence PW characteristics during HD. Volume overload (VO) is common in HD patients and may affect the chance of improving the cardiovascular status of patients during HD. The present study aimed to explore associations between RBV, UFV, VO and a wide range of PW parameters. Method In a single center in Vienna, Austria, 24 patients on maintenance HD underwent four HD sessions each, with whole-body bioimpedance spectroscopy (BIS) before, and automated, cuff-based PW measurements every 15 minutes, RBV- and UFV-monitoring throughout each session. Associations between RBV or UFV as independent variable and 26 different PW characteristics as dependent variables (52 separate models) were tested using confounder-adjusted generalized estimating equations with sandwich estimator and multilevel nested working covariance structure, reporting standardized effect estimates and drop-in-R² to assess variable importance. Sensitivity models including both RBV and UFV as predictors (26 models) were used to assess effects adjusted for confounding and mediation, respectively. The intra-patient correlation between BIS-derived VO and PW parameters at the start of sessions and PW parameter change by end of sessions was assessed using repeated measures correlation analysis. Results Data from 990 PW measurements were available for analysis from an 88% male cohort with median age of 66 years. In half of the PW parameters analyzed, each percent RBV was significantly associated with in summary about 4.3 to 5.7% (95% confidence intervals [CI] 0.9 to 10.46) of the PW parameter's respective standard deviation (SD), negatively so only in heart rate and R-Peak. UFV was negatively associated with a third of PW parameters (effects ranging from −2.5 to −5.47% SD [95% CIs −0.9 to −10.0]), mostly in classical peripheral and central pressures and peripheral resistance. In models including both predictors, RBV overall exhibited greater effect size and variance capture than UFV, except for peripheral resistance. On within-patient level, VO was positively correlated with initial medians of pressure excess (r=0.34, p=0.034), augmentation-index (0.34, p=0.031) and augmentation-pressure (0.32, p=0.042), increase in heart rate (0.32, p=0.04) and decreases in peripheral resistance (0.31, p=0.05), peripheral (systolic: 0.34, p=0.032; diastolic: 0.45, p=0.004; mean: 0.41, p=0.008) and central (diastolic: 0.46, p=0.003) blood pressures during HD. Conclusion The observed PW characteristics were associated with RBV and UFV during HD and may represent modifiable targets for intervention studies. Pressure excess, S-Peak, R-Peak, cardiac and preload parameters were more closely associated with RBV, while classic (especially diastolic) blood pressure parameters, ejection duration and S/D-Ratio were more associated with UFV, in models using both predictors. On average, blood pressure and peripheral resistance tended to decrease less when a patient began HD in a volume-expanded state, which may affect day-to-day feasibility of more classical pressure targets, but perhaps not of other PW parameters. Multiple PW characteristics have previously been shown to be associated with mortality and morbidity and are potential target parameters for future intervention trials. Utilizing RBV modification as an intervention may offer superior precision compared to UFV goals, requiring further studies. PW technology could also be adopted by HD-machine manufacturers at low cost, enabling more precise and individualized treatment options.

Early Alteration of Right Ventricle-Pulmonary Artery Coupling in Experimental Heart Failure With Preserved Ejection Fraction.

Pulmonary hypertension and right ventricular (RV) dysfunction are major prognostic determinants in patients with heart failure with preserved ejection fraction (HFpEF). The underlying pathomechanisms remain unknown. In this context, we sought to study the pathogenesis of pulmonary hypertension and RV dysfunction in a rat model of obesity-associated HFpEF. HFpEF was induced in obesity-prone rats fed a high-fat diet (n=13) and compared with obesity-resistant rats fed with standard chow (n=9). After 12 months, the animals underwent echocardiographic and hemodynamic evaluation followed by tissue sampling for pathobiological assessment. HFpEF rats presented mild RV pressure overload (with increased RV systolic pressure and pulmonary vascular resistance). No changes in pulmonary artery medial thickness and exvivo vasoreactivity (to acetylcholine and endothelin-1) were observed and RNA sequencing analysis failed to identify gene clustering in HFpEF lungs. However, released nitric oxide levels were decreased in HFpEF pulmonary artery, while lung expression of preproendothelin-1 was increased. In HFpEF rats, RV structure and function were altered, with RV enlargement, decreased RV fractional area change and free wall longitudinal fractional shortening, together with altered right ventricle-pulmonary artery coupling (estimated by tricuspid annular plane systolic excursion/systolic pulmonary artery pressure). Hypertrophy and apoptosis (evaluated by transferase biotin- dUTP nick-end labeling staining) were increased in right and left ventricles of HFpEF rats. There was an inverse correlation between tricuspid annular plane systolic excursion/systolic pulmonary artery pressure and RV apoptotic rate. Plasma levels of soluble suppression of tumorigenicity-2, interleukin-1β, -6 and -17A were increased in HFpEF rats. Obesity-associated HFpEF in rats spontaneously evolves to pulmonary hypertension-HFpEF associated with impaired right ventricle-pulmonary artery coupling that appears disproportionate to a slight increase in RV afterload.

Review of Underwater Anechoic Coating Technology Under Hydrostatic Pressure

AbstractThe underwater anechoic coating technology, which considers pressure resistance and low-frequency broadband sound absorption, has become a research hotspot in underwater acoustics and has received wide attention to address the increasingly advanced low-frequency sonar detection technology and adapt to the working environment of underwater vehicles in deep submergence. One the one hand, controlling low-frequency sound waves in water is more challenging than in air. On the other hand, in addition to initiating structural deformation, hydrostatic pressure also changes material parameters, both of which have a major effect on the sound absorption performance of the anechoic coating. Therefore, resolving the pressure resistance and acoustic performance of underwater acoustic coatings is difficult. Particularly, a bottleneck problem that must be addressed in this field is the acoustic structure design with low-frequency broadband sound absorption under high hydrostatic pressure. Based on the influence of hydrostatic pressure on underwater anechoic coatings, the research status of underwater acoustic structures under hydrostatic pressure from the aspects of sound absorption mechanisms, analysis methods, and structural designs is reviewed in this paper. Finally, the challenges and research trends encountered by underwater anechoic coating technology under hydrostatic pressure are summarized, providing a reference for the design and research of low-frequency broadband anechoic coating.

Visualization of dynamic micro-migration of shale oil and investigation of shale oil movability by NMRI combined oil charging/water flooding experiments: A novel approach

Investigating the micro-migration processes of hydrocarbons within interbedded shale reservoirs, and quantitatively characterizing the movability of shale oil, are highly important for the exploration and development of continental shale oil. However, due to complex pore-fracture structures, the characterization of the micro-migration and movability of shale oil presents significant difficulties, and the lack of suitable technology restricts the understanding of shale oil accumulation mechanisms and the evaluation of movability. This study employs nuclear magnetic resonance imaging (NMRI) technology in conjunction with oil charging and water flooding experiments, to innovatively visualize and quantitatively characterize the dynamic micro-migration features and movability of hydrocarbons within the pore-fracture structures of shale. The results indicate a significant increase in oil saturation within the interbedded shale oil reservoir during the oil charging process, with the oil phase primarily accumulating in larger pores (T2 = 1–100 ms). The micro-migration and accumulation process of interbedded shale oil can be divided into three stages: the initial stage dominated by water phases in the pore spaces due to insufficient oil filling pressure, the intermediate stage marked by a rapid increase in hydrocarbons in the pore spaces, and the final stage where oil fills the entire pore system resulting in high oil saturation. The movability of different types of shale oil during water flooding varies significantly and is mainly influenced by pore-fracture structures. Interbedded shale oil reservoirs with larger pores exhibits a higher movable oil saturation (approximately 36.94%), while matrix-type shale oil reservoirs shows greater heterogeneity and lower fluid movability (approximately 14%). However, the shale oil movability of matrix-type shale oil reservoir with developed microfractures can reach 40%. More specifically, the fluid movability in smaller pore-microfracture structures (T2 < 0.5 ms) is as high as 56.88%, surpassing that in larger pores (T2 > 0.5 ms) (32.78%). Larger pores and microfractures substantially enhance the movability of hydrocarbons in the shale matrix, thus improving shale oil recoverability. In contrast, due to the higher capillary pressure (Pc) and flow resistance (Pv), smaller pores contribute less to the movability of shale oil. Overall, the outcomes of this study not only advance our understanding of the micro-migration and accumulation patterns of interbedded shale oil but also offer new insights for geological and engineering integration research on shale oil.

Racial differences in baroreflex function: Implications for the cardiovascular conundrum

Study objectiveAfrican Americans (AAs) show early signs of vascular dysfunction paired with elevated blood pressure (BP) and total peripheral resistance (TPR), which is thought to underlie their increased rates of cardiovascular health complications relative to European Americans (EAs). AAs paradoxically have higher cardiac vagal tone, indexed by heart rate variability (HRV), which is cardio-protective. This paradox has been termed the Cardiovascular Conundrum. The physiological mechanism underlying this phenomenon is not well understood. We examined race differences in baroreflex function, which might be an important mechanism underlying the Cardiovascular Conundrum. DesignParticipants completed a 5-minute baseline period where resting cardiac metrics were assessed. SettingLaboratory. Participants130 college-aged individuals (54 women, 57 AAs). Main outcome measuresBaroreflex function was indexed as baroreflex sensitivity (BRS; the magnitude of changes in cardiovascular activity in accordance with BP changes) and effectiveness (BEI; the ratio of BP changes that elicit changes in cardiovascular activity) in the cardiac, vascular, and myocardial limbs. Results and conclusionsResults showed AAs to have higher HRV and cardiac BRS in comparison to EAs, suggesting the baroreflex is more sensitive to correcting the heart period for changes in BP among AAs compared to EAs. However, AAs showed lower vascular BEI relative to EAs, suggesting less effective control of TPR. In sum, lower BEI in the vascular branch might be an important mechanism underlying the Cardiovascular Conundrum (i.e., higher HRV and BP) and by extension, health disparities in cardiovascular diseases between AAs and EAs.

Optimization and predictive modeling of membrane based produced water treatment using machine learning models

Membrane technology has become a crucial solution for treating produced water, playing a vital role in resource recovery and environmental preservation. The use of advanced Artificial Intelligence (AI) technique such as Machine Learning (ML) has introduced an innovative approach to define and model these treatment procedures such as trans-membrane pressure (TMP) and total membrane resistance. The research focuses specifically on the utilization of Artificial Neural Network (ANN) and Extreme Gradient Boosting (XGBoost) model to improve the precision and effectiveness of produced water treatment using membrane technology. Also, the study presented explores how the Artificial Neural Network (ANN) framework excels in predictive insights and process modeling, optimizing operational parameters in membrane-based treatment setups. Furthermore, integrating the Extreme Gradient Boosting (XGBoost) model highlights its ability to enhance system performance, providing accurate predictions and better control in complex treatment processes. It presents comprehensive research of combining Artificial Neural Network (ANN) and Extreme Gradient Boosting (XGBoost) model with membrane technology for produced water treatment, emphasizing their potential to improve optimization techniques and modeling approaches, ultimately enhancing water treatment efficiency and sustainability. Both the Artificial Neural Network (ANN) and Extreme Gradient Boosting (XGBoost) models achieved an impressive R-squared (R2) scores of 0.754, and 0.97 for Transmembrane Pressure (TMP), and 0.95 and 0.81 for Total Resistance prediction respectively.

Comparison of ePTFE membranes with fluorine-free alternatives considering durability of laminated fabrics using hydrostatic pressure testing

Pleasant wearing comfort is achieved using laminated fabrics containing a waterproof and breathable membrane. The most used membrane type is expanded polytetrafluoroethylene. Due to the negative impact of perfluoroalkyl and polyfluoroalkyl substances on the environment, fluorine-free alternative materials are necessary. In this work, alternative membrane materials, polyurethane and polyethylene terephthalate, were compared with expanded polytetrafluoroethylene. First, the mass per unit area, thickness, tensile properties, water vapor resistance, and hydrostatic pressure of corresponding laminates were determined. Furthermore, their durability, which is an essential aspect of sustainability, was investigated. Therefore, they were hydrolyzed, weathered, washed, and incorrectly treated (e.g. washed with fabric softener) and then investigated for hydrostatic pressure resistance, by scanning electron microscopy, infrared spectroscopy, and digital microscopy. It was shown that polyethylene terephthalate and expanded polytetrafluoroethylene are comparable with respect to breathability, waterproofness (&gt;20 bar), and durability. However, the hydrostatic pressure resistance (approximately 11 bar) and the water vapor resistance values (&gt;23 m2 · Pa · W−1) of microporous polyurethane membranes are poorer, but they still provide suitable alternatives. In addition, a beginning degradation of polyurethane could be proved after hydrolysis and weathering. Furthermore, the deposition of calcium salts on all membranes was observed after washing with tap water, fabric softener, and washing agents.

Automated assessment of hydrostatic pressure resistance in woven fabrics using the enhanced YOLOv8 network

Hydrostatic pressure resistance serves as a crucial metric in the assessment of water resistance in woven fabrics. The expeditious, precise, and efficient conduct of hydrostatic pressure tests holds paramount importance in advancing the progress and production of high-performance textiles. Addressing the challenges posed by intricate printed patterns on woven fabrics, and the presence of small, widely scattered water droplets, the study leverages the enhanced YOLOv8 model to develop a machine vision-based automated detection technique for assessing water resistance in woven fabric. The proposed method incorporates convolutional block attention module attention mechanisms into the backbone and neck network, replaces the path aggregation network structure of YOLOv8 with the bidirectional feature pyramid network structure, and introduces a dedicated detection head for small targets. These enhancements facilitate accurate identification of water outlet points on the woven fabric and precise recording of frame positions, enabling the precise measurement of hydrostatic pressure. Validation of the proposed model is conducted through a series of comparative experiments utilizing a self-collected dataset. The experimental results underscore the exemplary performance of the proposed model, evidenced by an AP0.5 score of 92.18%, showcasing superior overall efficacy in comparison with alternative models. Notably, the target localization time error is found to be less than 2 s when contrasted with manual detection. This method substantially enhances the accuracy of water droplet detection and localization in hydrostatic pressure resistance testing of woven fabric, characterized by complex surface patterns, thereby contributing to refinement of hydrostatic pressure testing methodologies in woven fabric analysis.

RIGHT VENTRICULAR DYSFUNCTION AND TRICUSPID VALVE SURGICAL CORRECTION: ROOM FOR STRESS ECHOCARDIOGRAPHY?

Abstract We report the case of a 50–years–old young woman with multi–operated rheumatic valvular heart disease; aortic, mitral, and tricuspid commissurotomy (1994); aortic valve replacement with bioprosthesis for endocarditis (1998); mitro–aortic replacement with mechanical prosthesis and tricuspid valve plastic repair (1999); mitral valve replacement and re–do of tricuspid plastic repair (2003). Concomitant conduction pathway disease (BAV II type 1 and RBB). The patient was admitted in June 2023 for wet &amp; warm NYHA IV right heart failure with severe peripheral congestion and ascites. On echocardiography: LV with systo–diastolic compression, EF 51%; normo–functioning aortic prosthesis; dilated (TDA 24 cm2), hypokinetic (TAPSE 9mm,S‘ 4 cm/s,FAC 25%) right ventricole (RV), with poor load adaptation (load adaptation index 16, RVCPI 108 mm*mmHg, ePAPI 1.1); torrential IT, caval plethora with systolization of hepatic venous flow. Medical therapy was initiated with intravenous bolus diuretics, nitroglycerin and inotropic support (dobutamine 2.5 y). In order to define the best therapeutic strategy in the persistence of torrential IT and RV dysfunction we performed: trans–oesophageal echocardiography, showed massive IT from ring dilatation and wide flail of the septal flap not suitable for edge–to–edge correction, total–body angioTC, with no relevant findings, right cardiac catheterization, which documented pulmonary pressure and arteriolar resistances within limits (wedge 12 mmHg,PAP25/15/18 mmHg,RAP 11 mmHg,PAPI 0. 9,RVSWI 4.8) with reduced cardiac index (2.14 l/min/cm2) and stress–echocardiography with dobutamine that showed presence of RV contractile reserve (FAC 28%&amp;gt;39%). In consideration of the functional properties of the tricuspid valve, absence of pulmonary hypertension and given the presence of RV contractile reserve, patient underwent tricuspid valve replacement surgery with a bioprosthesis (SJ Epic 27 mm) in mini–thoracotomy with smooth postoperative course. At 3 months follow–up showed functional recovery (NYHA II), with good prosthetic function and partial reverse remodeling of the RV (TDA 14 cm2, FAC of 30%). In conclusion, by documenting right ventricular contractile reserve, stress echocardiography proved to be an important aid in predicting absence of RV failure in the immediate post–surgical period, presenting attractive prospects in the assessment of RV functional reserve in patients undergoing to corrective tricuspidal surgery.

Enhancement of bursting pressure resistance of braid-reinforced polyether sulfone hollow fiber composites

Enhancement of bursting pressure resistance of braid-reinforced polyether sulfone hollow fiber composites

Transient heat stress protects from severe endothelial damage and dysfunction during prolonged experimental ex-vivo lung perfusion.

The pulmonary endothelium is the primary target of lung ischemia-reperfusion injury leading to primary graft dysfunction after lung transplantation. We hypothesized that treating damaged rat lungs by a transient heat stress during ex-vivo lung perfusion (EVLP) to elicit a pulmonary heat shock response could protect the endothelium from severe reperfusion injury. Rat lungs damaged by 1h warm ischemia were reperfused on an EVLP platform for up to 6h at a constant temperature (T°) of 37°C (EVLP37°C group), or following a transient heat stress (HS) at 41.5°C from 1 to 1.5h of EVLP (EVLPHS group). A group of lungs exposed to 1h EVLP only (pre-heating conditions) was added as control (Baseline group). In a first protocol, we measured lung heat sock protein expression (HSP70, HSP27 and Hsc70) at selected time-points (n=5/group at each time). In a second protocol, we determined (n=5/group) lung weight gain (edema), pulmonary compliance, oxygenation capacity, pulmonary artery pressure (PAP) and vascular resistance (PVR), the expression of PECAM-1 (CD31) and phosphorylation status of Src-kinase and VE-cadherin in lung tissue, as well as the release in perfusate of cytokines (TNFα, IL-1β) and endothelial biomarkers (sPECAM, von Willebrand Factor -vWF-, sE-selectin and sICAM-1). Histological and immunofluorescent studies assessed perivascular edema and formation of 3-nitrotyrosine (a marker of peroxinitrite) in CD31 lung endothelium. HS induced an early (3h) and persisting expression of HSP70 and HSP27, without influencing Hsc70. Lungs from the EVLP37°C group developed massive edema, low compliance and oxygenation, elevated PAP and PVR, substantial release of TNFα, IL-1β, s-PECAM, vWF, E-selectin and s-ICAM, as well as significant Src-kinase activation, VE-cadherin phosphorylation, endothelial 3-NT formation and reduced CD31 expression. In marked contrast, all these alterations were either abrogated or significantly attenuated by HS treatment. The therapeutic application of a transient heat stress during EVLP of damaged rat lungs reduces endothelial permeability, attenuates pulmonary vasoconstriction, prevents src-kinase activation and VE-cadherin phosphorylation, while reducing endothelial peroxinitrite generation and the release of cytokines and endothelial biomarkers. Collectively, these data demonstrate that therapeutic heat stress may represent a promising strategy to protect the lung endothelium from severe reperfusion injury.

Relative Fundamental Frequency: Only for Hyperfunctional Voices? A Pilot Study.

(1) Background: Assessing phonatory disorders due to laryngeal biomechanical alterations requires aerodynamic analysis, assessing subglottic pressure, transglottic flow, and laryngeal resistance. This study explores whether the acoustic parameter, the relative fundamental frequency (RFF), can be studied using the current acoustic analysis protocol at the University of Navarra's voice laboratory and its association with pathologies linked to laryngeal biomechanical alterations. (2) Methods: A retrospective cohort study included patients diagnosed with muscular tension dysphonia, organic lesions of the vocal fold, and vocal fold paralysis (VFP) at the Clínica Universidad de Navarra from 2019 to 2021. Each patient underwent endoscopic laryngeal exploration, followed by acoustic study, RFF calculation, and an aerodynamic study. Additionally, a control group was recruited. (3) Results: 79 patients and 22 controls were studied. Two-way ANOVA showed significant effects for groups and cycles in offset and onset cycles. Statistically significant differences were observed in cycle 1 onset among all groups and in cycles 1 and 2 between the control group and non-healthy groups. (4) Conclusions: RFF is a valuable indicator of phonatory biomechanics, distinguishing healthy and pathological voices and different disorders. RFF in onset cycles offers a cost-effective, accurate method for assessing biomechanical disorders without complex aerodynamic analyses. This study describes RFF values in VFP for the first time, revealing differences regardless of aerodynamic patterns.

Theoretical analyses and experimental study on the factors influencing the pressure resistance of the magnetorheological grease seal with pinch mode pole piece

This paper mainly focuses on experimental research and theoretical analysis on the pressure resistance capability of magnetorheological grease rotary shaft sealing with pinch mode pole piece structure. Combining magnetorheological grease and pinch mode pole piece structure, the using of permanent magnet as magnetic source is aiming to reduce the lag of yield stress establishment and release. Herein, the micro-nano composite magnetorheological grease was prepared. Right after the synthesis process, its magnetization properties and rheological properties were scientifically and systematically characterized. The influence of different gaps and tooth widths on the magnetic induction intensity is analyzed by finite element method. Based on the theoretical method, the pressure resistance capacity induced by magnetic force is calculated. By comparing the theoretical calculation and experimental results of the pressure resistance, the cause of error and failure is analyzed.