Pretreatment Conditions Research Articles

Energy Integration of Thermal Pretreatment in Anaerobic Digestion of Wheat Straw

Cereal straw stands out as one of the most abundant and globally distributed agricultural residues. Traditional applications cope with a limited amount of production, leaving the remainder in the field for natural decomposition. Managing cereal straw through controlled biological transformation under anaerobic conditions holds the potential to generate added value in the form of bioenergy. However, the lignocellulosic composition of these substrates poses challenges for organic degradation, often requiring energy-intensive pretreatments. A detailed study with a comprehensive calculation of the overall energy balance of the integrated process is proposed, aiming to provide real added value and replicability. Three scenarios for wheat straw transformation were investigated, incorporating two preliminary pre-treatment stages—mechanical milling and physicochemical steam explosion. Three conditions of pretreatment were essayed, varying the time exposure of the steam explosion. The subsequent energy integration analysis revealed that the process was optimized by up to 15% in the final energy balance when the steam explosion was set to 10 min. The macromolecular composition determination revealed that the thermal pretreatment reduced the lag phase of the hydrolysis step through hemicellulose breakdown.

Enhanced adsorption of dye wastewater by low-temperature combined NaOH/urea pretreated hydrochar: Fabrication, performance, and mechanism.

The highly stable biomass structure formed by cellulose, hemicellulose, and lignin results in incomplete conversion and carbonization under hydrothermal conditions. In this study, pretreated corn straw hydrochar (PCS-HC) was prepared using a low-temperature alkali/urea combination pretreatment method. The Massloss rateof cellulose, hemicellulose, and lignin from pretreated biomass, as well as the effects of the pretreatment method on the physicochemical properties of PCS-HC and the adsorption performance of PCS-HC for alkaline dyes (rhodamine B and methylene blue), were investigated. The results showed that the low-temperature NaOH/urea pretreatment effectively disrupted the stable structure formed by cellulose, hemicellulose, and lignin. NaOH played a dominant role in solubilizing cellulose and the combination of low temperature and urea enhanced the ability of NaOH to remove cellulose, hemicellulose, and lignin. Compared to the untreated hydrochar, PCS-HC exhibited a rougher surface, a more abundant pore structure, and a larger specific surface area. The unpretreated hydrochar exhibited an adsorption capacity of 64.8% for rhodamine B and 66.32% for methylene blue. However, the removal of rhodamine B and methylene blue by PCS-BC increased to 89.12% and 90.71%, respectively, under the optimal pretreatment conditions. The PCS-HC exhibited a favorable adsorption capacity within the pH range of 6-9. However, the presence of co-existing anions such as Cl-, SO42-, CO32-, and NO3- hindered the adsorption capacity of PCS-HC. Among these anions, CO32- exhibited the highest level of inhibition. Chemisorption, including complexation, electrostatic attraction, and hydrogen bonding, were the primary mechanism for dye adsorption by PCS-HC. This study provides an efficient method for utilizing agricultural waste and treating dye wastewater.

An efficient and mild fractionation of corn stover via 2-phenoxyethanol and silicotungstic acid biphasic pretreatment for biomass valorization

Developing an efficient and facile pretreatment is of great importance to comprehensive utilization of lignocellulosic biomass. Herein, a biphasic system of 2-phenoxylethanol (EPH) and silicotungstic acid (STA) was employed for fractionation of corn stover. The EPH/STA biphasic system demonstrated remarkable fractionation efficiency to remove 90.23 % of xylan and 88.54 % of lignin, while retaining 85.60 % of cellulose under the mild pretreatment conditions of 130 °C for 90 min with 7/3 of EPH/STA and 40 mM of STA. The xylose of 52.93 % and lignin of 88.01 % were recovered in aqueous phase and organic phase by EPH/STA biphasic pretreatment, respectively. In the further process, 94.27 % of saccharification was achieved by enzymatic hydrolysis of cellulose-rich solid residue, and 106.17 mg/g of xylonic acid was obtained by oxidation of xylose in aqueous phase. Additionally, the recovered lignin in organic phase could be fabricated to lignin-based films with good mechanical properties. Notably, acid solvent in biphasic system had an important role in fractionation efficiency of corn stover. The STA had the best effect among the different acid solvents. This work provided a promising route to full components utilization of corn stover for biomass valorization.

Harnessing tobacco stem biomass for eco-friendly xylo-oligomers production via hydrothermal treatment and succinic acid via fermentation

The integration of processes offers promising avenues for valorization of the tobacco waste, enabling the production of commercially significant compounds beyond traditional tobacco leaves designation. This research delves into the feasibility of extracting xylo-oligosaccharides (XOS) from tobacco stems via hydrothermal pretreatment. Emphasis was laid on XOS release kinetics from high solid loads (20% w/v) during pretreatment. The optimal conditions, which facilitated maximum oligomer recovery with minimal degradation compounds and reducing sugar solubilization, were then scaled up. The resultant solid fraction underwent enzymatic hydrolysis at varied solid loads (5%, 10%, and 15% w/v). Subsequent to this, succinic acid production was targeted, propelling the optimal enzymatic hydrolysate towards fermentation using the bacterium Actinobacillus succinogenes. Key findings revealed that a temperature of 190 °C during 8-min emerged as the most effective pretreatment conditions, yielding XOS at 49.54% with a concentration of 11.11 g.L−1. Enzymatic hydrolysis remained relatively uninfluenced by variations in solid loads, thereby permitting the use of high solid loads (15% w/v) to obtain concentrated hydrolysates at 49.37 g.L−1 with a conversion yield of 62.90%. Markedly, this study pioneered the demonstration of tobacco waste as a viable precursor for biosuccinic acid synthesis. Succinic acid concentration stood at 16.88 g.L−1, achieving a yield of 42%. A comprehensive mass balance evaluation spotlighted the potential to derive 56 kg of XOS and 78 kg of succinic acid per 1000 kg of tobacco raw biomass by the process developed herein.

Chosen Biochemical and Physical Properties of Beetroot Treated with Ultrasound and Dried with Infrared–Hot Air Method

Beetroots are sources of bioactive compounds and valued pigments such as betalains. The purpose of this study was to determine the influence of ultrasound pretreatment on the beetroot infrared–hot air drying process and the functional properties of the obtained product. In this study, there were two used frequencies—21 and 35 kHz—and three different periods of time—10, 20, and 30 min. Since beetroots are usually subjected to thermal treatment, another aim was to examine the influence of blanching and soaking on the beetroot tissue properties in order to compare traditional and ultrasound-treated methods. As a result of this study, it was found that ultrasound pretreatment changed the dry matter content, water activity, thickness of the tissue, total color difference, and contents of betanin pigments in the beetroot. It was revealed that the drying process is shorter after ultrasound pretreatment using a 21 kHz frequency. Drying tissue exposed to ultrasounds showed a significant increase in the L* parameter; however, the decrease in the a* parameter was caused by a reduced content of betalain pigments. Taking into consideration parameters important from a technological point of view, it was found that the best condition for beetroot pretreatment is 20 min treatment, regardless of the frequency used.

High-efficient separation of deoxyribonucleic acid from pathogenic bacteria by hedgehog-inspired magnetic nanoparticles microextraction

Efficient separation of deoxyribonucleic acid (DNA) through magnetic nanoparticles (MN) is a widely used biotechnology. Hedgehog-inspired MNs (HMN) possess a high-surface-area due to the distinct burr-like structure of hedgehog, but there is no report about the usage of HMN for DNA extraction. Herein, to improve the selection of MN and illustrate the performance of HMN for DNA separation, HMN and silica-coated Fe3O4 nanoparticles (Fe3O4@SiO2) were fabricated and compared for the high-efficient separation of pathogenic bacteria of DNA. Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) are typical Gram-negative and Gram-positive bacteria and are selected as model pathogenic bacteria. To enhance the extraction efficiency of two kinds of MNs, various parameters, including pretreatment, lysis, binding and elution conditions, have been optimized in detail. In most separation experiments, the DNA yield of HMN was higher than that of Fe3O4@SiO2. Therefore, a HMN-based magnetic solid-phase microextraction (MSPE) and quantitative real-time PCR (qPCR) were integrated and used to detect pathogenic bacteria in real samples. Interestingly, the HMN-based MSPE combined qPCR strategy exhibited high sensitivity with a limit of detection of 2.0 × 101 CFU mL−1 for E. coli and 4.0 × 101 CFU mL−1 for S. aureus in orange juice, and 2.8 × 102 CFU mL−1 for E. coli and 1.1 × 102 CFU mL−1 for S. aureus in milk, respectively. The performance of the proposed strategy was significantly better than that of commercial kit. This work could prove that the novel HMN could be applicable for the efficient separation of DNA from complex biological samples.

Patients' subjective well-being: Determinants and its usage as a metric of healthcare service quality.

It is commonly suggested that patients' subjective well-being (SWB) can be affected by pre-treatment conditions and treatment experiences, and hence SWB can be used to measure and improve healthcare quality. With data collected in a hospital in the UK (N = 446), we investigated the determinants of patients' SWB and evaluated its use in healthcare research. Our findings showed strong relationships between pre-treatment conditions and patients' SWB: anxiety and depression negatively predicted SWB across all three domains, mobility positively predicted the life satisfaction and happiness domains, while the ability to self care and pain and discomfort also predicted SWB in some domains. In contrast, patients' satisfaction with the treatment only played minor roles in determining SWB, much less so the characteristics of their nurses. The general lack of associations between treatment experiences and patient's SWB highlighted the challenges of using SWB to measure healthcare quality and inform policy making.

Efficient bio-hydrogen production by dark co-fermentation of food-rich municipal solid waste and urban pruning wastes of pine, cypress, and berry

Bio-hydrogen (bio-H2) production from dark co-fermentation of pruning wastes, from pine, cypress, and berry trees, and food-rich municipal solid waste (FMSW) was evaluated as a promising way to combine waste management and renewable energy production. The inoculum was initially optimized by heat-shock pretreatment at 65, 75, 85, and 95 ℃ for 15, 30, and 45 min to maximize bio-H2 yields. The optimum pretreatment conditions (75 °C for 45 min) were applied for dark co-fermentation analyses. The highest bio-H2 production yield of 84 ± 6 mL/g VS was obtained by dark co-fermentation of 20 g/L pruning wastes and FMSW under initially neutral conditions. The fermentation of individual substrates led to 40.9, 0.2, 0.1, and 0.2 mL/g VS from FMSW, pine, berry, and cypress, respectively, 85% lower than that obtained through dark co-fermentation. Therefore, co-processing of a “stiff substrate”, lignocellulose, with a “loose part”, starchy FMSW, leads to a higher bio-H2 yield. Dark co-fermentation led to the bio-conversion of more than 76% of starch, 31% of glucan, and 41% of hemicellulose, besides 41% lignin removal. The modified Gompertz model (MGM) and Logistic model (MLM) were well-fitted on kinetic data (with R2 values ≥0.98), and the kinetic parameters were calculated.

Optimization of ultrasonic conditions for improving the characteristics of corn starch-glycyrrhiza polysaccharide composite to prepare enhanced quality lycopene inclusion complex

In this study, based on response surface optimization of ultrasound pre-treatment conditions for encapsulating lycopene, the corn starch-glycyrrhiza polysaccharide composite (US-CS-GP) was used to prepare a novel lycopene inclusion complex (US-CS-GP-Lyc). Ultrasound treatment (575 W, 25 kHz) at 35 °C for 25 min significantly enhanced the rheological and starch properties of US-CS-GP, facilitating the preparation of US-CS-GP-Lyc with an encapsulation efficiency of 76.12 ± 1.76 %. In addition, the crystalline structure, thermal properties, and microstructure of the obtained lycopene inclusion complex were significantly improved and showed excellent antioxidant activity and storage stability. The US-CS-GP-Lyc exhibited a V-type crystal structure, enhanced lycopene loading capacity, and reduced crystalline regions due to increased amorphous regions, as well as superior thermal properties, including a lower maximum thermal decomposition rate and a higher maximum decomposition temperature. Furthermore, its smooth surface with dense pores provides enhanced space and protection for lycopene loading. Moreover, the US-CS-GP-Lyc displayed the highest DPPH scavenging rate (92.20 %) and enhanced stability under light and prolonged storage. These findings indicate that ultrasonic pretreatment can boost electrostatic forces and hydrogen bonding between corn starch and glycyrrhiza polysaccharide, enhance composite properties, and improve lycopene encapsulation, which may provide a scientific basis for the application of ultrasound technology in the refined processing of starch-polysaccharides composite products.

Ursodeoxycholic and chenodeoxycholic bile acids attenuate systemic and liver inflammation induced by lipopolysaccharide in rats.

Bacterial lipopolysaccharide (LPS) induces general inflammation, by activating pathways involving cytokine production, blood coagulation, complement system activation, and acute phase protein release. The key cellular players are leukocytes and endothelial cells, that lead to tissue injury and organ failure. The aim of this study was to explore the anti-inflammatory, antioxidant, and cytoprotective properties of two bile acids, ursodeoxycholic acid (UDCA) and chenodeoxycholic acid (CDCA) in LPS-induced endotoxemia in rats. The experiment involved six distinct groups of Wistar rats, each subjected to different pretreatment conditions: control and LPS groups were pretreated with propylene glycol, as a bile acid solvent, while the other groups were pretreated with UDCA or CDCA for 10 days followed by an LPS injection on day 10. The results showed that both UDCA and CDCA reduced the production of pro-inflammatory cytokines: TNF-α, GM-CSF, IL-2, IFNγ, IL-6, and IL-1β and expression of nuclear factor-κB (NF-κB) induced by LPS. In addition, pretreatment with these bile acids showed a positive impact on lipid profiles, a decrease in ICAM levels, an increase in antioxidant activity (SOD, |CAT, GSH), and a decrease in prooxidant markers (H2O2 and O2-). Furthermore, both bile acids alleviated LPS-induced liver injury. While UDCA and CDCA pretreatment attenuated homocysteine levels in LPS-treated rats, only UDCA pretreatment showed reductions in other serum biochemical markers, including creatine kinase, lactate dehydrogenase, and high-sensitivity troponin I. It can be concluded that both, UDCA and CDCA, although exerted slightly different effects, can prevent the inflammatory responses induced by LPS, improve oxidative stress status, and attenuate LPS-induced liver injury.

Feedstock/pretreatment screening for bioconversion of sugar and lignin streams via deacetylated disc-refining

Recent publications have shown the benefits of deacetylation disc-refining (DDR) as a pretreatment process to deconstruct biomass into sugars and lignin residues. Major advantages of DDR pretreatment over steam and dilute acid pretreatment are the removal of acetyl and lignin during deacetylation. DDR does not generate hydroxymethylfurfural (HMF) and furfural which are commonly produced from steam and dilute acid pretreatments. Acetate, lignin, HMF, and furfural are known inhibitors during enzymatic hydrolysis and fermentation. Another advantage of deacetylation is the production of lignin-rich black liquor, which can be upgraded to other bioproducts. Furthermore, due to the lack of sugar degradation during deacetylation, DDR has significantly less sugar loss than other pretreatment methods. Previous studies for DDR have primarily focused on corn stover, but lacked the investigative studies of other feedstocks. This study was designed to screen various DDR process conditions at pilot scale using three different feedstocks, including corn stover, poplar, and switchgrass. The impact of the pretreatment conditions was evaluated by testing hydrolysates for bioconversion to 2,3-butanediol. Pretreatment of biomass by DDR showed high-conversion-yields and 2,3-BDO fermentation production yields. Techno-economic analysis (TEA) of the pretreatment for biomass to sugar was also developed based on NREL’s Aspen Model. This study shows that the cellulose and hemicellulose in poplar was more recalcitrant than herbaceous feedstocks which ultimately drove up the sugar cost. Switchgrass was also more recalcitrant than corn stover but less than poplar.

Optimizing alkali-pretreatment dosage for waste-activated sludge disintegration and enhanced biogas production yield

The rapid transition towards modernization and industrialization led to an increase in urban population, resulting in paramount challenge to municipal sewage sludge management. Anaerobic digestion (AD) serves as a promising venue for energy recovery from waste-activated sludge (WAS). Addressing the challenge of breaking down floc structures and microbial cells is crucial for releasing extracellular polymeric substances and cytoplasmic macromolecules to facilitate hydrolysis and fermentation process. The present study aims to introduce a combined process of alkaline/acid pre-treatments and AD to enhance sludge digestion and biogas production. The study investigates the influence of alkali pretreatment at ambient temperature using four alkali reagents (NaOH, Ca(OH)2, Mg(OH)2, and KOH). The primary goal is to provide insights into the intricate interplay of alkali dosages (0.04–0.12 g/gTS) on key physic-chemical parameters crucial for optimizing the pre-treatment dosage. Under the optimized alkaline/acid pre-treatment condition, the TSS reduction of 18%–30% was achieved. An increase in sCOD concentration (24%–50%) signifies the enhanced hydrolysis and solubilization rate of organic substrate in WAS. Finally, the biomethane potential test (BMPT) was performed for pre-treated WAS samples. The maximum methane (CH4) yield was observed in combination A1 (244 mL/g) and D1 (253 mL/g), demonstrating the pivotal role of alkali optimization in enhancing AD efficiency. This study serves as a valuable resource to policymakers, researchers, and technocrats in addressing challenges associated to sludge management.

Machine learning insights into catalyst composition and structural effects on CH4 selectivity in iron-based fischer tropsch synthesis

Fe-based Fischer-Tropsch Synthesis (FTS) enables the selective conversion of syngas into long-chain hydrocarbons, which can be further refined to produce highly demanded liquid fuels and high-value chemical products. However, developing novel heterogeneous catalysts for FTS with desirable performance characteristics is a challenging task, as their performance depends on various factors such as precursor, support material, promoters, pretreatment conditions and the catalyst structures. Thus, it remains difficult to understand the structure-performance relationship of FTS and to optimize the catalyst formulations and operating conditions rationally. By integrating traditional chemistry with machine learning, we herein establish intrinsic correlations among reduction, reaction conditions, phase information and the methane selectivity of Fe-based FTS, using high quality experimental data. The content of the iron phases in the post-reaction phase, particularly χ-Fe5C2, significantly influences the methane selectivity of the catalyst. Four types of additives K, Cu, SiO2, and Ca could effectively suppress the methane selectivity, most likely by promoting or stabilizing the iron carbide phases, indicated by their strong correlation. The machine learned structure-performance relationships offers new insights into the design of Fe-based FTS catalysts, and could guide the further optimization of the preprocessing conditions and various parameter factors to minimize the methane selectivity of FTS.

Grade identification of rice eating quality via a novel flow-injection voltammetric electronic tongue combined with SFFS-BO-SVM

Given the importance and complexity of grade identification for rice eating quality, this study aimed to use a self-established flow-injection voltammetric electronic tongue (FIE-tongue) combined with SFFS-BO-SVM to replace human sensory evaluation. A novel FIE-tongue was firstly designed and established in this work, and the optimal rice pretreatment conditions were determined by fractional factorial design (FFD) which used for FIE-tongue detection. Based on optimized detection data, the optimized features and hyperparameters of 16 samples in three eating quality grades for SVM model were obtained by Sequential Floating Forward Selection (SFFS) algorithm and Bayesian Optimization (BO) algorithm, respectively. Compared to the original SVM model established by all features, the accuracy of SFFS-BO-SVM model for different grades were all higher than 92%, and have the increasement of 5.5%, 18.8%, and 11.4%, respectively. Therefore, the FIE-tongue combined with SFFS-BO-SVM method should be promising for rice eating quality grading and other food quality control.

Treadmill exercise pretreatment ameliorated structural synaptic plasticity impairments of medial prefrontal cortex in vascular dementia rat and improved recognition memory

This study aimed to investigate structural synaptic plasticity in the medial prefrontal cortex of rats under treadmill exercise pretreatment or naive conditions in a vascular dementia model, followed by recognition memory performance in a novel object recognition task. In this study, 24 Sprague–Dawley rats were obtained and randomly assigned into 4 groups as follows: control group (Con group, n = 6), vascular dementia (VD group, n = 6), exercise and vascular dementia group (Exe + VD group, n = 6), and exercise group (Exe group, n = 6). Initially, 4 weeks of treadmill exercise intervention was administered to the rats in the Exe + VD and Exe groups. Then, to establish the vascular dementia model, the rats both in the VD and Exe + VD groups were subjected to bilateral common carotids arteries surgery. One week later, open-field task and novel recognition memory task were adopted to evaluate anxiety-like behavior and recognition memory in each group. Then, immunofluorescence and Golgi staining were used to evaluate neuronal number and spine density in the rat medial prefrontal cortex. Transmission electron microscopy was used to observe the synaptic ultrastructure. Finally, microdialysis coupled with high-performance liquid chromatography was used to assess the levels of 5-HT and dopamine in the medial prefrontal cortex. The behavior results showed that 4 weeks of treadmill exercise pretreatment significantly alleviated recognition memory impairment and anxiety-like behavior in VD rats (P < 0.01), while the rats in VD group exhibited impaired recognition memory and anxiety-like behavior when compared with the Con group (P < 0.001). Additionally, NeuN immunostaining results revealed a significant decrease of NeuN-marked neuron in the VD group compared to Con group (P < 0.01), but a significantly increase in this molecular marker was found in the Exe + VD group compared to the Con group (P < 0.01). Golgi staining results showed that the medial prefrontal cortex neurons in the VD group displayed fewer dendritic spines than those in the Con group (P < 0.01), and there were more spines on the dendrites of medial prefrontal cortex cells in Exe + VD rats than in VD rats (P < 0.01). Transmission electron microscopy further revealed that there was a significant reduction of synapses intensity in the medial prefrontal cortex of rats in the VD group when compared with the Con group(P < 0.01), but physical exercise was found to significantly increased synapses intensity in the VD model (P < 0.01). Lastly, the levels of dopamine and 5-HT in the medial prefrontal cortex of rats in the VD group was significantly lower compared to the Con group (P < 0.01), and treadmill exercise was shown to significantly increased the levels of dopamine and 5-HT in the VD rats (P < 0.05). Treadmill exercise pretreatment ameliorated structural synaptic plasticity impairments of medial prefrontal cortex in VD rat and improved recognition memory.

Magnetic Solid-Phase Extraction (MSPE) Coupled With Gas Chromatography-Barrier Discharge Ionization Detection (GC-BID) for the Simultaneous Determination of 16 Phthalates in Baijiu

Prolonged exposure to phthalates (PAEs) can adversely affect the human endocrine system. This study proposes a method for quantitatively determining the PAE content in Baijiu using magnetic solid-phase extraction (MSPE) coupled with gas chromatography-barrier discharge ionization detection (GC-BID). A hydrophobic reversed-phase (C18) magnetic adsorbent was used to extract and enrich the PAEs in Baijiu, and GC-BID was used for their separation and detection. The pretreatment and detection conditions were investigated and optimized to improve the recovery of the PAEs. Under the optimized conditions, the method performed effectively in the linear range (20.0–3000.0 ng/mL), with limits of detection ranging from 0.04 to 0.62 ng/mL, relative standard deviations from 1.5 to 8.7% and enrichment factors from 26.6 to 50.0. The MSPE-GC-BID method successfully detected PAEs in the Baijiu samples. The recovery of the 16 PAEs in the spiked Baijiu ranged from 42.3 to 143.9%, with a relative standard deviation of less than 7.2%. This method shows good repeatability and precision, making it suitable for the determination of phthalates in Baijiu.

Hot-air drying vs. lyophilization of sugar beet flakes for efficient pectin recovery and influence of extraction conditions on pectin physicochemical properties

This study assessed the influence of drying pretreatment and extraction conditions (type of acid and particle size of plant material) on the yield and physicochemical properties of pectin from sugar beet flakes resulted as by-product of sugar beet processing in the sugar industry. The results indicated that the drying conditions (hot-air drying and lyophilization) affected the extraction yield, the chemical composition of pectin, its color, degree of methylation and acetylation, molecular weight, and its rheological and emulsifying properties. The best results for pectin yield (16.20%), galacturonic acid content (91.19 g/100 g), degree of methylation and acetylation (66.93 and 23.87%), and molecular weight (3.89 × 105 g/mol) were obtained when sugar beet flakes were pretreated by hot-air drying, and the extraction was made with citric acid using plant material with particle sizes of 125–200 μm. This pectin also had high emulsion activity (51.42%) and emulsion stability (88.03%). The FT-IR spectra were similar, while pectin thermal behavior was affected by the drying pretreatment and extraction conditions. The results of this study showed that from this by-product of the sugar industry it can be extracted high quality pectin with rheological and emulsifying properties that are superior to commercial citrus and apple pectin.

Enzymatic hydrolysis of soybean hulls to produce a potential carbon source for cultivation of exopolysaccharide-producing diazotrophic bacteria

Lignocellulosic biomass, such as soybean hulls, constitutes a promising alternative substrate for application in biotechnological processes, as it is abundant, inexpensive, and renewable. However, its use is limited by the inability of bacteria and yeasts to assimilate it. To solve this problem, pretreatment and enzymatic hydrolysis conditions of soybean hulls were studied to produce a substrate capable of assimilating by exopolysaccharide-producing diazotrophic bacteria. Pretreatments by microwave (power of 1.4 kW during 30 s, 60 s, or 120 s) or autoclave (1.1 atm and 121 °C during 15 min, 30 min, or 60 min) were tested to favor the enzymatic action. Celluclast 1.5L® was used as a biocatalyst. The best results for pretreatment were obtained in an autoclave (121 °C for 15 min), with an increase of 6.7 times in the concentration of reducing sugars (40.4 g/L) in relation to hydrolysis without any previous pretreatment (6.0 g/L). The best hydrolysis conditions were established as a temperature of 50 °C, pH 5.3, and enzyme/substrate ratio of 20 FPU/g, reaching 40.4 g/L of reducing sugars. The hydrolysate was composed mainly of cellobiose, followed of glucose, xylose, and arabinose. It was used for the cultivation of Mesorhizobium sp. Semia 816, producing 1.26 g/L biomass and 3.93 g/L exopolysaccharides (EPS). An increase in viscosity with a pH decrease was observed, as well as a high degradation temperature. These results proved that soybean hull hydrolysate can be assimilated by Mesorhizobium sp. Semia 816 to produce EPS with potential industrial applications.

Clinical efficacy of cyclosporin and natamycin for fungal keratitis.

To investigate the clinical efficacy of cyclosporin (CYSP) and natamycin (NAT) as a combination therapy in patients with fungal keratitis. This is a retrospective study. A total of 64 patients (64 eyes) with fungal keratitis treated by Baoding No.1 Central Hospital between December 2018 and May 2022 according to their treatment methods were divided into a monotherapy (MT) group receiving NAT eye drops solely and a combination therapy (CT) group given CYSP eye drops in addition to the exact treatment provided for the MT group. The clinical responses, visual acuity changes, severity of eye symptoms, and adverse reactions were compared between the two groups. At two and four weeks post-treatment, the CT group had an overall response rate (ORR) significantly higher than that of the MT group (P< 0.05, respectively); both groups showed improved visual acuity and eye symptoms compared with the pre-treatment condition, and these improvements were more pronounced in the CT group (P < 0.05, respectively). Compared with the MT group, the CT group experienced a significantly shorter duration of eye symptoms (P < 0.05). The adverse reaction rate(ARR) was 9.38% in the CT group and 6.25% in the MT group, and the difference was not significant (P > 0.05). Using CYSP and NAT as a combination therapy for fungal keratitis can substantially heighten the therapeutic effects, promote visual acuity recovery, and induce rapid remission of eye symptoms without increasing the risk of adverse reactions.

A tailored deep eutectic solvent for high-yield conversion of poplar residues to bio-based building blocks at mild conditions

The generation of condensed compounds in a deep eutectic solvent (DES) pretreatment has become a paramount factor that inhibits the further conversion of pretreated cellulose-rich substrate. This study proposed a novel three-constituent DES system for the value-added utilization of poplar residues by efficiently suppressing hemicellulose derived condensation reactions. The results showed that adding ethanol into the DES system could effectively deconstruct the recalcitrant structure of poplar residues, simultaneously hindering the condensed composition formation. Under optimum ethanol addition (30%), the maximum xylan and lignin removal of 87.94% and 90.99% could be achieved, with more than 90.47% of glucan being preserved. With this, the glucan enzymatic hydrolysis efficiency was remarkably improved to 100% under the pretreatment conditions of 100 °C for 60 min, which was 84.69 times higher than the regular DES-pretreated poplar residues (1.17%). The working mechanism of relieving condensation reactions was characterized by Py-GC–MS, NMR, SEM, FTIR, and others. The results demonstrated that the addition of ethanol could regulate the degradation/conversion pathway of hemicellulose and lignin precipitation, thus inhibit the formation of condensed compounds during the pretreatment.