Potential Wound Healing Applications Research Articles

Biologically Active Dibenzofurans from Pilidiostigma glabrum, an Endemic Australian Myrtaceae

In an effort to identify new anti-inflammatory and antibacterial agents with potential application in wound healing, five new dibenzofurans, 1,3,7,9-tetrahydroxy-2,8-dimethyl-4,6-di(2-methylbutanoyl)dibenzofuran (1), 1,3,7,9-tetrahydroxy-2,8-dimethyl-4-(2-methylbutanoyl)-6-(2-methylpropionyl)dibenzofuran (2), 1,3,7,9-tetrahydroxy-2,8-dimethyl-4,6-di(2-methylpropionyl)dibenzofuran (3), 1,3,7,9-tetrahydroxy-4,6-dimethyl-2-(2-methylbutanoyl)-8-(2-methylpropionyl)dibenzofuran (4), and 1,3,7,9-tetrahydroxy-4,6-dimethyl-2,8-di(2-methylpropionyl)dibenzofuran (5), were isolated from the leaves of Pilidiostigma glabrum together with one previously described dibenzofuran. Structure elucidation was achieved by way of spectroscopic measurements including 2D-NMR spectroscopy. Compounds with 2,8-acyl substitutions had potent antibacterial activity against several Gram-positive strains (MIC in the low micromolar range), while compounds with 4,6-acyl substitutions were less active. All compounds except 3 inhibited the synthesis of nitric oxide in RAW264 macrophages with IC(50) values in the low micromolar range. Compounds with 2,8-acyl substitutions also inhibited the synthesis of PGE(2) in 3T3 cells, whereas 4,6-acyl-substituted compounds were inactive. None of the compounds inhibited the synthesis of TNF-α in RAW264 cells. The compounds showed variable but modest antioxidant activity in the oxygen radical absorbance capacity assay. These findings highlight that much of the Australian flora remains unexplored and may yet yield many new compounds of interest. Initial clues are provided on structure/activity relationships for this class of bioactives, which may enable the design and synthesis of compounds with higher activity and/or selectivity.

ChemInform Abstract: Preactivation‐Based, One‐Pot Combinatorial Synthesis of Heparin‐Like Hexasaccharides for the Analysis of Heparin—Protein Interactions.

Heparin (HP) and heparan sulfate (HS) play important roles in many biological events. Increasing evidence has shown that the biological functions of HP and HS can be critically dependent upon their precise structures, including the position of the iduronic acids and sulfation patterns. However, unraveling the HP code has been extremely challenging due to the enormous structural variations. To overcome this hurdle, we investigated the possibility of assembling a library of HP/HS oligosaccharides using a preactivation-based, one-pot glycosylation method. A major challenge in HP/HS oligosaccharide synthesis is stereoselectivity in the formation of the cis-1,4-linkages between glucosamine and the uronic acid. Through screening, suitable protective groups were identified on the matching glycosyl donor and acceptor, leading to stereospecific formation of both the cis-1,4- and trans-1,4-linkages present in HP. The protective group chemistry designed was also very flexible. From two advanced thioglycosyl disaccharide intermediates, all of the required disaccharide modules for library preparation could be generated in a divergent manner, which greatly simplified building-block preparation. Furthermore, the reactivity-independent nature of the preactivation-based, one-pot approach enabled us to mix the building blocks. This allowed rapid assembly of twelve HP/HS hexasaccharides with systematically varied and precisely controlled backbone structures in a combinatorial fashion. The speed and the high yields achieved in glycoassembly without the need to use a large excess of building blocks highlighted the advantages of our approach, which can be of general use to facilitate the study of HP/HS biology. As a proof of principle, this panel of hexasaccharides was used to probe the effect of backbone sequence on binding with the fibroblast growth factor-2 (FGF-2). A trisaccharide sequence of 2-O-sulfated iduronic acid flanked by N-sulfated glucosamines was identified to be the minimum binding motif and N-sulfation was found to be critical. This provides useful information for further development of more potent compounds towards FGF-2 binding, which can have potential applications in wound healing and anticancer therapy.

Preactivation-based, one-pot combinatorial synthesis of heparin-like hexasaccharides for the analysis of heparin-protein interactions.

Heparin (HP) and heparan sulfate (HS) play important roles in many biological events. Increasing evidence has shown that the biological functions of HP and HS can be critically dependent upon their precise structures, including the position of the iduronic acids and sulfation patterns. However, unraveling the HP code has been extremely challenging due to the enormous structural variations. To overcome this hurdle, we investigated the possibility of assembling a library of HP/HS oligosaccharides using a preactivation-based, one-pot glycosylation method. A major challenge in HP/HS oligosaccharide synthesis is stereoselectivity in the formation of the cis-1,4-linkages between glucosamine and the uronic acid. Through screening, suitable protective groups were identified on the matching glycosyl donor and acceptor, leading to stereospecific formation of both the cis-1,4- and trans-1,4-linkages present in HP. The protective group chemistry designed was also very flexible. From two advanced thioglycosyl disaccharide intermediates, all of the required disaccharide modules for library preparation could be generated in a divergent manner, which greatly simplified building-block preparation. Furthermore, the reactivity-independent nature of the preactivation-based, one-pot approach enabled us to mix the building blocks. This allowed rapid assembly of twelve HP/HS hexasaccharides with systematically varied and precisely controlled backbone structures in a combinatorial fashion. The speed and the high yields achieved in glycoassembly without the need to use a large excess of building blocks highlighted the advantages of our approach, which can be of general use to facilitate the study of HP/HS biology. As a proof of principle, this panel of hexasaccharides was used to probe the effect of backbone sequence on binding with the fibroblast growth factor-2 (FGF-2). A trisaccharide sequence of 2-O-sulfated iduronic acid flanked by N-sulfated glucosamines was identified to be the minimum binding motif and N-sulfation was found to be critical. This provides useful information for further development of more potent compounds towards FGF-2 binding, which can have potential applications in wound healing and anticancer therapy.

Tissue scaffolds for skin wound healing and dermal reconstruction

One of the major applications of tissue-engineered skin substitutes for wound healing is to promote the healing of cutaneous wounds. In this respect, many important clinical milestones have been reached in the past decades. However, currently available skin substitutes for wound healing often suffer from a range of problems including wound contraction, scar formation, and poor integration with host tissue. Engineering skin substitutes by tissue engineering approach has relied upon the creation of three-dimensional scaffolds as extracellular matrix (ECM) analog to guide cell adhesion, growth, and differentiation to form skin-functional and structural tissue. The three-dimensional scaffolds can not only cover wound and give a physical barrier against external infection as wound dressing, but also can provide support both for dermal fibroblasts and the overlying keratinocytes for skin tissue engineering. A successful tissue scaffold should exhibit appropriate physical and mechanical characteristics and provide an appropriate surface chemistry and nano and microstructures to facilitate cellular attachment, proliferation, and differentiation. A variety of scaffolds have been fabricated based on materials ranging from naturally occurring ones to those manufactured synthetically. This review discusses a variety of commercial or laboratory-engineered skin substitutes for wound healing. Central to the discussion are the scaffolds/materials, fabrication techniques, and their characteristics associated with wound healing. One specifically highlighted emerging fabrication technique is electrospinning that allows the design and fabrication of biomimetic scaffolds that offer tremendous potential applications in wound healing of skin.

Physical, antibacterial and antioxidant properties of chitosan films incorporated with thyme oil for potential wound healing applications

Chitosan films incorporated with thyme oil for potential applications of wound dressing were successfully prepared by solvent casting method. The water vapor permeability, oxygen transmission rate, and mechanical properties of the films were determined. Surface and cross-section morphologies and the film thicknesses were determined by Scanning Electron Microscopy (SEM). Fourier transform infrared (FT-IR) spectroscopy was conducted to determine functional group interactions between the chitosan and thyme oil. Thermal behaviors of the films were analyzed by Thermal Gravimetry (TGA) and Differential Scanning Calorimetry (DSC). In addition, the antimicrobial and the antioxidant activities of the films were investigated. The antimicrobial test was carried by agar diffusion method and the growth inhibition effects of the films including different amount of thyme oil were tested on the gram negative microorganisms of Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa and a gram positive microorganism of Staphylococcus aureus. The minimum thyme oil concentration in chitosan films showing the antimicrobial activity on all microorganisms used in the study was found as 1.2 % (v/v). In addition, this concentration showed the highest antioxidant activity due to mainly the carvacrol in thyme oil. Water vapor permeability and oxygen transmission rate of the films slightly increased, however, mechanical properties decreased with thyme oil incorporation. The results revealed that the thyme oil has a good potential to be incorporated into chitosan to make antibacterial and permeable films for wound healing applications.

Human lactoferrin stimulates skin keratinocyte function and wound re-epithelialization

Human lactoferrin (hLF), a member of the transferrin family, is known for its antimicrobial and anti-inflammatory effects. Recent studies on various nonskin cell lines indicate that hLF may have a stimulatory effect on cell proliferation. To study the potential role of hLF in wound re-epithelialization. The effects of hLF on cell growth, migration, attachment and survival were assessed, with a rice-derived recombinant hLF (holo-rhLF), using proliferation analysis, scratch migration assay, calcein-AM/propidium iodide staining and terminal deoxynucleotidyl transferase-mediated dUTP nick-end labelling (TUNEL) method, respectively. The mechanisms of hLF on cell proliferation and migration were explored using specific pathway inhibitors. The involvement of lactoferrin receptor low-density lipoprotein receptor-related protein 1 (LRP1) was examined with RNA interference technique. An in vivo swine second-degree burn wound model was also used to assess wound re-epithelialization. Studies revealed that holo-rhLF significantly stimulated keratinocyte proliferation which could be blocked by mitogen-activated protein kinase (MAPK) kinase 1 inhibitor. Holo-rhLF also showed strong promoting effects on keratinocyte migration, which could be blocked by either inhibition of the MAPK, Src and Rho/ROCK pathways, or downregulation of the LRP1 receptor. With cells under starving or 12-O-tetradecanoylphorbol-13-acetate exposure, the addition of holo-rhLF was found greatly to increase cell viability and inhibit cell apoptosis. Additionally, holo-rhLF significantly increased the rate of wound re-epithelialization in swine second-degree burn wounds. Our studies demonstrate the direct effects of holo-rhLF on wound re-epithelialization including the enhancement of keratinocyte proliferation and migration as well as the protection of cells from apoptosis. The data strongly indicate its potential therapeutic applications in wound healing.

Rheological and thermal characteristics of a two phase hydrogel system for potential wound healing applications

Hydrogels fabricated from single polymers have been extensively investigated for wound healing applications. However, in many cases a single polymer cannot meet divergent demands in terms of both properties and performance. In this work, a two phase hydrogel was prepared by physically imbedding a xerogel in the core of a freeze thawed hydrogel. The outer hydrogel was prepared by freeze thawing poly (vinyl alcohol) (PVA) and poly (acrylic acid) (PAA) while the xerogels were prepared by UV polymerisation of 1-vinyl-2-pyrrolidinone (NVP). The rheological results indicated that the two phase hydrogels over a period of 2 weeks formed a strong interface and demonstrated greater physical strength. This suggested that the inner gel containing PVP diffused into the PVA/PAA hydrogel, which in turn increased hydrogen bonding, resulting in the overall increase in the stiffness of the gel. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) confirmed hydrogen bonding had occurred between the constituents of the two phase hydrogels. Thermal analysis suggested that T g of each of the samples was above 80 °C, which indicated no impact on the behaviour of the gel at body temperature, but did however, give an indication of the stiffness of the dry polymer.

A physiologically active polysaccharide hydrogel promotes wound healing

When the skin is injured, the subcutaneous tissues and organs are threatened by pathogens and excessive water loss. Wound dressings are, therefore, needed to protect the wound site from infection and improve the wound closure. Natural polysaccharides have been applied for various biomaterials including wound dressings, which show their advantages in biocompatibility, low toxicity, and pharmaceutical biomedical activity. In this study, a natural polysaccharide Bletilla striata polysaccharide (BSP) hydrogel is prepared by an oxidation and crosslinking methods. This BSP hydrogel represents preferable swelling ability and appropriate water vapor transmission rate. Using a full-thickness trauma mouse model, the hydrogel is applied on the in vivo cutaneous wound healing. Compared with the control groups, the BSP hydrogel achieves the much better healing results. The quantification of the infiltrating inflammatory cells and the level of tumor necrosis factor alpha (TNF-alpha) in the BSP group are attenuated, whereas the secretion of the epidermal growth factor (EGF) is highly elevated. On the 11th day after surgery, the wound area in the BSP hydrogel group is only 1/5-1/3 of those in the control groups. This new BSP hydrogel is proved to control the inflammatory responses and accelerate the wound closure and has potential application in wound healing. (c) 2010 Wiley Periodicals, Inc. J Biomed Mater Res, 2010.

Collagen-based wound dressing for doxycycline delivery: in-vivo evaluation in an infected excisional wound model in rats

Abstract Objectives A novel collagen-based dressing consisting of 2,3-dihydroxybenzoic-acid-modified gelatin microspheres loaded with doxycycline has previously been reported to address both infection and matrix degradation. In the present study the potential benefits of the dressing were investigated in an excisional wound model in rats challenged with Pseudomonas aeruginosa. Methods A full-thick excisional wound (1.5 times 1.5 cm) was created on the dorsum of the rats and infection induced by injecting 105 colony-forming units (CFU) of P. aeruginosa. The healing pattern was assessed from wound reduction, matrix metalloprotease (MMP) levels, CFU reduction and histological and biochemical analysis. Key findings The treated group exhibited complete healing by day 15, compared with day 24 in the control group. Early subsidence of infection (99.9% by day 9) resulted in faster epidermal resurfacing and fibroplasias, whereas the microbial load exceeded 103 CFU even on day 15 in the control group and caused severe inflammation. Biochemical analysis showed that the expression of both collagen and hexosamine was significantly increased in the treated group. Gelatin zymography revealed prolonged expression of MMPs 2, 8 and 9 in the control group compared with the treated group. Conclusions The study indicates that the developed dressing attenuated both infection and metalloprotease levels, and may therefore have potential application in wound healing.

A versatile pH sensitive chondroitin sulfate–PEG tissue adhesive and hydrogel

We developed a chondroitin sulfate–polyethylene glycol (CS–PEG) adhesive hydrogel with numerous potential biomedical applications. The carboxyl groups on chondroitin sulfate (CS) chains were functionalized with N-hydroxysuccinimide (NHS) to yield chondroitin sulfate succinimidyl succinate (CS–NHS). Following purification, the CS–NHS molecule can react with primary amines to form amide bonds. Hence, using six arm polyethylene glycol amine PEG–(NH 2) 6 as a crosslinker we formed a hydrogel which was covalently bound to proteins in tissue via amide bonds. By varying the initial pH of the precursor solutions, the hydrogel stiffness, swelling properties, and kinetics of gelation could be controlled. The sealing/adhesive strength could also be modified by varying the damping and storage modulus properties of the material. The adhesive strength of the material with cartilage tissue was shown to be ten times higher than that of fibrin glue. Cells encapsulated or in direct contact with the material remained viable and metabolically active. Furthermore, CS–PEG material produced minimal inflammatory response when implanted subcutaneously in a rat model and enzymatic degradation was demonstrated in vitro. This work establishes an adhesive hydrogel derived from biological and synthetic components with potential application in wound healing and regenerative medicine.

Collagen-based wound dressing for doxycycline delivery: in-vivo evaluation in an infected excisional wound model in rats

A novel collagen-based dressing consisting of 2,3-dihydroxybenzoic-acid-modified gelatin microspheres loaded with doxycycline has previously been reported to address both infection and matrix degradation. In the present study the potential benefits of the dressing were investigated in an excisional wound model in rats challenged with Pseudomonas aeruginosa. A full-thick excisional wound (1.5 x 1.5 cm) was created on the dorsum of the rats and infection induced by injecting 10(5) colony-forming units (CFU) of P. aeruginosa. The healing pattern was assessed from wound reduction, matrix metalloprotease (MMP) levels, CFU reduction and histological and biochemical analysis. The treated group exhibited complete healing by day 15, compared with day 24 in the control group. Early subsidence of infection (99.9% by day 9) resulted in faster epidermal resurfacing and fibroplasias, whereas the microbial load exceeded 10(3) CFU even on day 15 in the control group and caused severe inflammation. Biochemical analysis showed that the expression of both collagen and hexosamine was significantly increased in the treated group. Gelatin zymography revealed prolonged expression of MMPs 2, 8 and 9 in the control group compared with the treated group. The study indicates that the developed dressing attenuated both infection and metalloprotease levels, and may therefore have potential application in wound healing.

In vitro evaluation of novel chitosan derivatives sheet and paste cytocompatibility on human dermal fibroblasts

The cytocompatibility of novel chitosan derivative sheets and pastes were evaluated in vitro for possible utilization in wound dressing applications for wound healing. In this study, the cytotoxicity of oligo-chitosan (O-C), N, O-carboxymethyl-chitosan (NO-CMC) and N- carboxymethyl-chitosan (N-CMC) derivatives in sheet like and paste forms were evaluated using primary normal human dermal fibroblast cultures and hypertrophic scars; a fibrotic conditions representing a model of altered wound healing with overproduction of extracellular matrix and fibroblast hyperproliferative activity. Cytotoxicities of these chitosan derivatives were assessed using 3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl tetrazolium bromide (MTT) assay. The results indicate that both chitosan derivative sheets and pastes have appropriate cytocompatibility and appear promising as safe biomaterials with potential wound healing applications. The SH120 (NO-CMC) derivatives sheet exhibited highest cytocompatibility property and may be regulated by MMP-13 in controlling the cell growth and its expression level.

Development of a novel porous cryo-foam for potential wound healing applications

This body of work describes the development of a porous hydrogel for wound healing applications. In the present study poly (vinyl alcohol) (PVA) and poly (acrylic acid) (PAA) based hydrogels were prepared, and their properties were examined. Varying concentrations of the polymers and distilled water were used to prepare the hydrogels. The use of a high shear mixer, for foaming the PVA and PVA/PAA gels, and how this physical change can affect the structure and porosity of the hydrogel in question, represents a key feature of this work. The mechanical and thermal properties were determined by parallel plate rheometry and modulated differential scanning calorimetry (MDSC) respectively. The results indicated that the hydrogels containing low concentration of PVA and high volume of H(2)O are significantly weaker than those synthesised with higher concentrations of PVA. The thermal analysis shows distinct endotherms and provides evidence of crystallisation. The chemical structure of the hydrogels was confirmed by means of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR).

The rheological and thermal characteristics of freeze-thawed hydrogels containing hydrogen peroxide for potential wound healing applications

The current study involves the development of a hydrogel carrier for a H 2O 2 delivery system. In this work poly (vinyl alcohol) (PVA) and poly (acrylic acid) (PAA) based hydrogels were prepared, and their mechanical and physical properties examined. The novel aspect of this research is the differing functionality created by varying the concentration of H 2O 2. The mechanical and thermal properties were determined by parallel plate rheometry and modulated differential scanning calorimetry (MDSC) respectively. The results indicated that the hydrogels containing H 2O 2 are significantly weaker than those synthesised using water alone at test temperatures of 30 and 45 ∘C. MDSC analysis suggested that thermal transitions occur at temperatures that may make these hydrogels useful as temperature sensitive drug delivery systems. The chemical structure of the hydrogels was confirmed by means of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), while swelling experiments in distilled water indicate that the swelling of the gels is temperature dependent.

Engineered collagen–PEO nanofibers and fabrics

Type I collagen-PEO fibers and non-woven fiber networks were produced by the electrospinning of a weak acid solution of purified collagen at ambient temperature and pressure. As determined by high-resolution SEM and TEM, fiber morphology was influenced by solution viscosity, conductivity, and flow rate. Uniform fibers with a diameter range of 100-150 nm were produced from a 2-wt% solution of collagen-PEO at a flow rate of 100 μl min-1. Ultimate tensile strength and elastic modulus of the resulting non-woven fabrics was dependent upon the chosen weight ratio of the collagen-PEO blend. 1H NMR dipolar magnetization transfer analysis suggested that the superior mechanical properties, observed for collagen-PEO blends of weight ratio 1 : 1, were due to the maximization of intermolecular interactions between the PEO and collagen components. The process outlined herein provides a convenient, non-toxic, non-denaturing approach for the generation collagen-containing nanofibers and non-woven fabrics that have potential application in wound healing, tissue engineering, and as hemostatic agents.

An Improved Matrix-Type Controlled Release System for Basic Fibroblast Growth Factor

Basic fibroblast growth factor is an angiogenic polypeptide with potential application in wound healing and surgery. However, its use in these situations has been hampered by its instability in vivo. Controlled release systems have been developed to overcome this, but as yet high yields of basic fibroblast growth factor from a permanent matrix-type device have been elusive. In the present study we describe a device, based on ethylene vinyl acetate copolymer, capable of releasing active basic fibroblast growth factor for at least three weeks. The yield and duration of release of active growth factor from this device is significantly higher than previously reported for devices of this type. This improved yield is made possible by a variation in the production method used for matrix-type devices.