Post-synthetic Treatment Research Articles

Surface Plasmon Modulation in Cu3-xP Nanocrystals.

We demonstrate modulation of the surface plasmon resonance in nonstoichiometric copper phosphide nanocrystals using spectroelectrochemical methods. Application of an anodic potential resulted in a blue-shift of the surface plasmon resonance and an incremental increase in its extinction coefficient. Conversely, upon application of a cathodic potential, the surface plasmon band red-shifted and reduced in intensity. These changes were found to be reversible over multiple cycles of anodic and cathodic potential steps. We also discuss how the postsynthetic ligand treatment impacts the surface plasmon peak and the structure of Cu3-xP nanocrystals. For example, the addition of alkylthiols resulted in the chemical decomposition of the nanocrystals. This work demonstrates how the surface plasmon peak in Cu3-xP can be used to probe changes in the structure and carrier density in these nanocrystals.

FTIR traced modification of defect-engineered UiO-66 for enhanced accessibility of zirconium sites

This research focuses on identifying the accessibility of active sites within the defect-engineered UiO-66 framework. The task is particularly challenging due to reversible changes in the framework during dehydroxylation: the loss of μ3-OH groups with simultaneous reduction of the Zr coordination number and the possible creation of Zr4+ Lewis acid sites in defect MOFs. We used in-situ FTIR and XANES analyses, as well as interaction with probe molecules, to monitor the changes in Zr coordination and the host-guest interaction. The defects were introduced using benzoic acid as a modulator, which coordinated to Zr4+ in defective pores. Our results showed that the UiO-66 sample synthesized with benzoic acid contained defects, but these were concealed under benzoate residues and thus inaccessible. Standard washing and heating did not remove benzoate anions. Dehydroxylation of the sample leads to the development of “hidden” Lewis acidity: some Zr4+ sites were not able to form complexes with the weak base CO, but they interact with the stronger bases acetonitrile. Additionally, in-situ XANES analysis revealed that the effect of acetonitrile adsorption is similar to that of water rehydration. Treatment of the sample with HCl and DMF led to the replacement of benzoates with formate ions, exposing the bare Zr4+ sites within the defective pores. These cationic sites acted as true Lewis acids and were able to coordinate both CO and acetonitrile. Our findings emphasize that the active sites in UiO-66 highly depend on synthesis conditions and post-synthetic treatments. Comprehensive site-specific methods are crucial for accurately predicting and identifying these active sites.

Selective dealumination of large pore Zeolite Beta for effective Brønsted acid site utilization

Tuning of Al sites through spatial and geometric distribution is a novel pursuit for deterministic catalytic performance. To design an efficient Zeolite Beta for phenol alkylation with optimal physicochemical attributes, we conducted a systematic study with a series of dicarboxylic acids to selectively extract the framework and/or non-framework Aluminium. Herein, the post-synthetic treatment resulted in dealuminated catalysts of silicon-to-aluminum ratio ∼15–53. Extensive Al and Si NMR studies glean the selective extraction of aluminum from the zeolitic framework along with recomposition in T sites. The potency study alludes to the convoluted role of pH, chelating ability, and/or site accessibility for complexation. The differentiated Al extraction results in the emergence of unique super-strong acid sites. The novelty of our approach was established using phenol alkylation with cyclohexanol wherein we observed the highest conversion and desired CC alkylated product formation for the malonic acid-treated Zeolite Beta.

In Situ Defect Engineering of Fe-MIL for Self-Enhanced Peroxidase-Like Activity.

Defect engineering is an effective strategy to enhance the enzyme-like activity of nanozymes. However, previous efforts have primarily focused on introducing defects via de novo synthesis and post-synthetic treatment, overlooking the dynamic evolution of defects during the catalytic process involving highly reactive oxygen species. Herein, a defect-engineered metal-organic framework (MOF) nanozyme with mixed linkers is reported. Over twofold peroxidase (POD)-like activity enhancement compared with unmodified nanozyme highlights the critical role of in situ defect formation in enhancing the catalytic performance of nanozyme. Experimental results reveal that highly active hydroxyl radical (•OH) generated in the catalytic process etches the 2,5-dihydroxyterephthalic acid ligands, contributing to electronic structure modulation of metal sites and enlarged pore sizes in the framework. The self-enhanced POD-like activity induced by in situ defect engineering promotes the generation of •OH, holding promise in colorimetric sensing for detecting dichlorvos. Utilizing smartphone photography for RGB value extraction, the resultant sensing platform achieves the detection for dichlorvos ranging from 5 to 300ngmL-1 with a low detection limit of 2.06ngmL-1. This pioneering work in creating in situ defects in MOFs to improve catalytic activity offers a novel perspective on traditional defect engineering.

Optimizing post-treatment strategies for enhanced oxygen reduction/evolution activity in Co–N–C electrocatalyst

Uncovering the origin of bifunctional oxygen reduction/evolution reaction (ORR/OER) activity of M-N-C type electrocatalysts is essential for their extensive usage in fuel cells and metal-air batteries. The electrochemical properties of heterogeneous M-N-C catalysts depend on the surface structure, which can be modified via different synthetic methods. Herein, we investigate the effect of structure on the activity of Co–N–C electrocatalyst material derived from an amorphous metal-organic framework TAL-2. Specifically, TAL-2 served as the sole precursor for the synthesis of a range of Co–N–C catalysts via various carbonization and acid-leaching modes. Co–N–C catalysts were prepared by carbonizing TAL-2 at different temperatures (700, 800, 900, and 1000 °C) and subsequent acid-leaching using different acids, namely HCl, H2SO4, and HNO3, either individually or in various combinations. This resulted in the generation of 36 distinct catalyst samples, each exhibiting unique morphological characteristics. By systematically varying these parameters, we aimed to unravel the intricate relationship between post-synthetic treatment and the resulting electrocatalytic properties, shedding light on the rational design of Co–N–C catalysts for enhanced ORR/OER.

Unraveling the NH3-SCR-DeNOx Mechanism of Cu-SSZ-13 Variants by Spectroscopic and Transient Techniques.

Commercial SSZ-13 zeolite with different n(Si)/n(Al) ratios and from different suppliers were subjected to a post-synthetic treatment in order to create mesopores of up to 15 nm. Furthermore, the materials were modified with copper ions and thoroughly physico-chemically characterized. The modified textural properties varied the nature of copper species, and thus, activity in the selective catalytic reduction of NOx with ammonia (NH3-SCR-DeNOx). Pulsed-field gradient nuclear magnetic resonance (PFG-NMR) studies with hexane as probe liquid revealed improved intracrystalline diffusion for some Cu-containing SSZ-13 materials. The NH3-SCR-DeNOx pathways are verified via in situ DR UV-Vis, in situ FT-IR and EPR, temperature-programmed studies as well as SSITKA studies that provide a mechanistic understanding of the reaction. Kinetic modelling results demonstrate the highest NH3-SCR-DeNOx reaction rates and up to 20 % lower energy barriers with n(Si)/n(Al) ratio of 6.5 for all modified forms (i. e., (NH4)Cu-SSZ-13_6.5 and Cu-SSZ-13_6.5_NaOH/0.1) and cause only negligible parasitic ammonia oxidation. The modelling of the stop-flow experiments further demonstrates that the SCR pathway via the HONO surface intermediate is present but barely contributes to the overall NO conversion compared to the dominant path between adsorbed NH3 and NO from the gas phase.

STUDY OF THE COMBINED EFFECT OF POST-SYNTHETIC ALKALINE TREATMENT AND NICKEL MODIFICATION OF MFI ZEOLITE ON THE DYNAMICS OF ITS DEACTIVATION IN THE PROCESS OF REFINING STRAIGHT-RUN GASOLINE

To determine the combined effect of post-synthetic treatments on the catalytic properties of MFI type zeolite (other names ZSM-5 or pentasil) during the upgrading of straight-run gasoline fraction of oil, MFI zeolite was synthesized and on its basis a sample was obtained, treated with an alkaline solution, as well as a nickel-containing sample after alkaline treatment of the zeolite. Modification of zeolite powder treated with an alkaline solution with nanosized nickel powder was carried out by dry mechanical mixing of the original powders in a vibrating mill. The activity and dynamics of deactivation of the obtained zeolite catalysts during the upgrading of straight-run gasoline fraction of oil were studied. Along with determining the characteristics of the target reaction products - high-octane gasoline, an analysis of the resulting gaseous hydrocarbons was carried out and the amount of carbon compaction products was determined. It has been shown that post-synthetic treatments of zeolite have a positive effect on the qualitative composition and yield of catalysates and reduce the rate of deactivation of zeolite catalysts. Post-synthetic alkaline treatment of MFI zeolite significantly reduces its aromatizing and cracking activity, resulting in an increased yield of high-octane gasoline with improved environmental characteristics. The introduction of nickel nanopowder into alkali-treated zeolite further enhances this tendency. Carrying out post-synthetic treatments of zeolite increases the time of stable operation of the resulting zeolite systems in the process of upgrading straight-run gasoline and reduces the amount of carbon compaction products formed. The state, location and dimensions of the zeolite carrier, nickel particles and carbon compaction products were determined using the transmission electron microscopy method. It has been shown that oxidative regeneration of a carbonized catalyst makes it possible to almost completely remove the resulting carbon deposits from the surface of both the active component and the zeolite support. For citation: Velichkina L.M., Gerasimov E.Yu., Vosmerikov A.V. Study of the combined effect of post-synthetic alkaline treatment and nickel modification of MFI zeolite on the dynamics of its deactivation in the process of refining straight-run gasoline. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 8. P. 103-112. DOI: 10.6060/ivkkt.20246708.10t.

Revival of Degraded CsPbI3 Nanocrystals by Diselenide Ligand and Nanocrystal Self-Assembly on Nanofibrilar Ligand Template.

Among the lead halide perovskite (LHP) family, CsPbI3 is known to be significantly vulnerable to moisture, which hinders its use in real device applications. It is reported that chalcogen-based ligands can better stabilize CsPbI3 and revive nanocrystals (NCs). Here, diphenyl diselenide (DPhDSe) ligand is used to revive the degraded CsPbI3 NCs through a post-synthetic treatment of adding a small amount of DPhDSe in the degraded NC dispersion. DPhDSe in the dispersion formed nanofibrillar crystals at a low temperature through the π-π stacking of the phenyl ring. The nanofibrils played as a template on which the NCs self-assembled and they are attached side-by-side to form microfibers. The microfiber powder containing the NCs is optically stable at ambient conditions and morphologically self-healable by mild thermal annealing due to the dynamic Se─Se bond. The mechanism of the structural changes, optical transitions, and chemical changes has been systematically characterized through electron microscopy, diffraction, spectroscopy, and elemental analysis.

Post-Synthetically Treated ERI and SSZ-13 Zeolites Modified with Copper as Catalysts for NH3-SCR-DeNOx

ERI and SSZ-13 were subjected to post-synthetic treatments (depending on the zeolite topology) to create micro-/mesoporous materials. The results in terms of NH3-SCR-DeNOx show that the applied treatments improved the catalytic activity of the Cu-containing ERI-based materials; however, the NO conversion did not vary for the different materials treated with NaOH or NaOH/HNO3. For the micro-/mesoporous Cu-containing SSZ-13, a lower NO conversion in NH3-SCR-DeNOx was observed. Thus, our findings challenge the current paradigm of enhanced activity of micro-/mesoporous catalysts in NH3-SCR-DeNOx. The modification of the supports results in the presence of different amounts and kinds of copper species (especially isolated Cu2+ and aggregated Cu species) in the case of ERI- and SSZ-13-based samples. The present copper species further differentiate the formation of reactive reaction intermediates. Our studies show that besides the μ-η2,η2-peroxo dicopper(II) complexes (verified by in situ DR UV-Vis spectroscopy), copper nitrates (evidenced by in situ FT-IR spectroscopy) also act as reactive intermediates in these catalytic systems.

Facile and scalable growth of bimetallic 3D Ag/MIL125-NH2 on cotton fabric for multifaceted anti-wetting and self-healing characteristics

Multifunctional cotton fabric holds great promise across domestic and healthcare sectors. However, the challenge lies in developing a simple, sustainable method to create versatile, multifunctional cotton fabric. Herein, we designed novel 3D bimetallic organic frameworks (Ag/MIL125-NH2) for the first time and fabricated BM125@COT, a superhydrophobic cotton fabric adorned with porous hierarchical grooves. This was achieved by spraying Ag/MIL125-NH2 onto the cotton fabric's surface, followed by post-synthetic treatment with non-fluorinated myristic acid, resulting in superhydrophobic BM125@COT. The coated fabric showed a water contact angle (WCA) of 162.2° and a water sliding angle (WSA) of 4° ± 1. Surface morphology, size, structural and chemical composition, and anti-wetting properties of synthesized MOFs and BM125@COT were evaluated by SEM, EDS, TEM, XRD, XPS, UV/Vis, ATR, DSC, and Optical Tensiometer. Durability tests, including splash tests, abrasion resistance, tape peeling, washing, pH effects, and ultrasonication cycles, underscored the fabric's robust mechanical stability and chemical resistance. Moreover, superhydrophobic BM125@COT demonstrated UV-blocking efficiency, impressive self-cleaning capabilities, and enhanced antibacterial activity. This low-cost, scalable, and sustainable fabric, fabricated through a straightforward one-step spray coating technique, holds immense potential for versatile applications.

Impact of NH4OH treatment on the ion exchange and pore characteristics of a metakaolin-based geopolymer.

We investigated the viability and influence of NH4OH post-synthetic treatment on the pore characteristics of geopolymers. Geopolymers are a class of materials with amorphous aluminosilicate three-dimensional frameworks, regarded as amorphous analogues of zeolites. Similar to zeolites, when geopolymers are used in catalysis or adsorption applications, post-synthetic treatments such as ion exchange with NH4 + salts (e.g., NH4Cl and NH4NO3) and desilication (using strong bases such as NaOH) are necessary to introduce active sites and modify their pore structure, respectively. Recently, it has been shown that treatment with NH4OH combines these two steps, in which acidic sites are introduced and the pore structures of zeolites are modified simultaneously. Considering the increasing interest in geopolymers in catalysis and adsorption applications, understanding the impact of such treatment on the structure of geopolymers is needed. Our diffuse reflectance infrared Fourier-transform spectra show that NH4 + exchanges Na+ in the geopolymer, and laser diffraction with scanning electron microscopy images show that the particle size of the powdered geopolymer decreases after NH4OH treatment. N2 sorption isotherms and 129Xe and 1H NMR measurements revealed information about the changes in pore structures: micropores were larger than mesopores and inborn mesopores increased in diameter, thereby reducing the surface area to volume ratio. However, pore accessibility and pore connectivity were not altered by NH4OH treatment. Since solid-state NMR and X-ray fluorescence revealed desilication, these changes in particle size and pore characteristics are considered to be due to desilication caused by NH4OH treatment.

Simultaneous Control of Aluminum Atoms and Defects in the MOR Zeolite Framework by Postsynthetic Treatments

Simultaneous Control of Aluminum Atoms and Defects in the MOR Zeolite Framework by Postsynthetic Treatments

Aluminum Carboxylate Modification Enabled Efficient and Stable Perovskite-Polystyrene Thin Films for Light-Emitting Applications.

Lead halide perovskite nanocrystals (PNCs) have demonstrated great potential in emerging display technologies. However, the practical application of PNCs is hindered by the inherent instability of their ionic surface. Here, we proposed a surface modification approach to enhance the stability of CsPbBr3 PNCs by postsynthetic treatment with aluminum phenylbutyrate (Al(PA)3). Our study reveals that Al(PA)3 displaces ammonium ligands and binds tightly on surface halide, providing excellent air and moisture resistance while preserving a high quantum efficiency of 81.6%. The modified PNCs maintain a constant photoluminescence intensity under continuous UV light illumination for 500 h. Additionally, the Al(PA)3 ligand is compatible with styrene, enabling homogeneous dispersion of PNCs in polystyrene matrices to form bright and uniform PNC-PS thin films. We demonstrated the application of the composite films for display backlighting, which exhibits a wide color gamut of 125% NTSC. The result highlights the potential of AlPA-modified PNCs in light-emitting and other optoelectronic devices.

Near-Unity Photoluminescence Quantum Yield of Core-Only InP Quantum Dots via a Simple Postsynthetic InF3 Treatment.

Indium phosphide (InP) quantum dots (QDs) are considered the most promising alternative for Cd and Pb-based QDs for lighting and display applications. However, while core-only QDs of CdSe and CdTe have been prepared with near-unity photoluminescence quantum yield (PLQY), this is not yet achieved for InP QDs. Treatments with HF have been used to boost the PLQY of InP core-only QDs up to 85%. However, HF etches the QDs, causing loss of material and broadening of the optical features. Here, we present a simple postsynthesis HF-free treatment that is based on passivating the surface of the InP QDs with InF3. For optimized conditions, this results in a PLQY as high as 93% and nearly monoexponential photoluminescence decay. Etching of the particle surface is entirely avoided if the treatment is performed under stringent acid-free conditions. We show that this treatment is applicable to InP QDs with various sizes and InP QDs obtained via different synthesis routes. The optical properties of the resulting core-only InP QDs are on par with InP/ZnSe/ZnS core-shell QDs, with significantly higher absorption coefficients in the blue, and with potential for faster charge transport. These are important advantages when considering InP QDs for use in micro-LEDs or photodetectors.

Toward the microporous zeolite family with tunable large-medium cage and pore opening

Modulation of zeolite porosity, including the size and type of channel and cage, is essential for catalysis and separation. Although zeolites with a variety of porous systems have been synthesized by hydrothermal or post-synthetic routes, there is still a lack of rational control of zeolite porosity in the range of large to medium pore/cage. Herein, based on the rational structure building, the structure similarity between IWV topology with large-pore opening and supercage and NES topology with medium-pore opening and medium cage is discovered. Based on the guidance of structure building, two IWV-derived daughter zeolites with different framework compositions, (Si,Ge)-ECNU-31 and (Si,Ge,Al)-ECNU-31, are hydrothermally prepared with built-in structural weakness due to the presence of a large amount of framework Ge atoms, which are utilized to prepare ECNU-32 zeolite with NES topology through subsequent post-synthetic treatment under controlled condition. It is demonstrated that the parent IWV zeolite with only Ge and Si as framework atoms is benefit in post-treatment to obtain a highly crystalline NES zeolite. In contrast, the co-existence of framework Al atoms in (Si,Ge,Al)-ECNU-31 zeolite enhances its hydrothermal stability in water. However, the treatment with acid and amine solutions causes the partial collapse of zeolite structure. Our results demonstrate that rational selection of the framework composition and post-synthetic parameters are crucial for the transformation of large-pore zeolite to medium-pore zeolite.

Radical-Driven Crystal-Amorphous-Crystal Transition of a Metal-Organic Framework.

Self-assembly-based structural transition has been explored for various applications, including molecular machines, sensors, and drug delivery. In this study, we developed new redox-active metal-organic frameworks (MOFs) called DGIST-10 series that comprise π-acidic 1,4,5,8-naphthalenediimide (NDI)-based ligands and Ni2+ ions, aiming to boost ligand-self-assembly-driven structural transition and study the involved mechanism. Notably, during the synthesis of the MOFs, a single-crystal-amorphous-single-crystal structural transition occurred within the MOFs upon radical formation, which was ascribed to the fact that radicals prefer spin-pairing or through-space electron delocalization by π-orbital overlap. The radical-formation-induced structural transitions were further confirmed by the postsynthetic solvothermal treatment of isolated nonradical MOF crystals. Notably, the transient amorphous phase without morphological disintegration was clearly observed, contributing to the seminal structural change of the MOF. We believe that this unprecedented structural transition triggered by the ligand self-assembly magnifies the structural flexibility and diversity of MOFs, which is one of the pivotal aspects of MOFs.

Shuttling Active Elements in and out of Ultrathin Nanowires: Toward Rational Design of Multicomponent Catalysts.

One-dimensional nanostructures, with a high ratio of surface-bulk atoms, find applications as active catalysts. Here, we report tunability in ultrathin single-crystalline AuPdPt nanowires by modifying synthesis conditions and postsynthetic treatment in a controlled ambient atmosphere. The surface microstructure modification of these nanostructures has been analyzed by integrating the results of three crucial techniques including Z-contrast HAADF-STEM imaging, X-ray photoelectron spectroscopy, and electrochemically active surface area from cyclic voltammograms.

Utilizing Data Mining for the Synthesis of Functionalized Tungsten Oxide with Enhanced Oxygen Vacancies for Highly Sensitive Detection of Triethylamine.

The optimal combination of metal ions and ligands for sensing materials was estimated by using a data-driven model developed in this research. This model utilized advanced computational algorithms and a data set of 100,000 literature pieces. The semiconductor metal oxide (SMO) that is most suitable for detecting triethylamine (TEA) with the highest probability was identified by using the Word2vec model, which employed the maximum likelihood method. The loss function of the probability distribution was minimized in this process. Based on the analysis, a novel hierarchical nanostructured tungsten-based coordination with 2,5-dihydroxyterephthalic acid (W-DHTA) was synthesized. This synthesis involved a postsynthetic hydrothermal treatment (psHT) and the self-assembly of tungsten oxide nanorods. The tungsten oxide nanorods had a significant number of oxygen vacancies. Various techniques were used to characterize the synthesized material, and its sensing performance toward volatile organic compound (VOC) gases was evaluated. The results showed that the functionalized tungsten oxide exhibited an exceptionally high sensitivity and selectivity toward TEA gas. Even in a highly disturbed environment, the detection limit for TEA gas was as low as 40 parts per billion (ppb). Furthermore, our findings suggest that the control of oxygen vacancies in sensing materials plays a crucial role in enhancing the sensitivity and selectivity of gas sensors. This approach was supported by the utilization of density functional theory (DFT) computation and machine learning algorithms to assess and analyze the performance of sensor devices, providing a highly efficient and universally applicable research methodology for the development and design of next-generation functional materials.

Probing oxygen exchange between UiO-66(Zr) MOF and water using 17 O solid-state NMR.

The Zr-based Metal Organic Framework (MOF) UiO-66(Zr) is widely employed owing to its good thermal and chemical stabilities. Although the long-range structure of this MOF is preserved in the presence of water during several days, little is known about the formation of defects, which cannot be detected using diffraction techniques. We apply here 17 O solid-state NMR spectroscopy at 18.8 T to investigate the reactivity of UiO-66, through the exchange of oxygen atoms between the different sites of the MOF and water. For that purpose, we have selectively enriched in 17 O isotope the carboxylate groups of UiO-66(Zr) by using it with 17 O-labeled terephthalic acid prepared using mechanochemistry. In the presence of water at 50 °C and a following dehydration at 150 °C, we observe an overall exchange of O atoms between COO- and μ3 -O2- sites. Furthermore, we demonstrate that the three distinct oxygen sites, μ3 -OH, μ3 -O2- and COO- , of UiO-66(Zr) MOF can be enriched in 17 O isotope by post-synthetic hydrothermal treatment in the presence of 17 O-enriched water. These results demonstrate the lability of Zr-O bonds and the reactivity of UiO-66(Zr) with water.

Simultaneously improved photoluminescence, stability, and carrier transport of perovskite nanocrystals by post-synthetic perfluorobutanesulfonic acid treatment.

We report a post-synthetic treatment method based on perfluorobutanesulfonic acid (PFBA) to ameliorate the photophysical performance of perovskite nanocrystals. By virtue of the PFBA treatment, both the photoluminescence efficiency and stability of perovskite quantum dot-based colloidal solutions and the electrical conductivity of their close-packed films are simultaneously improved.