Positive Ion Spectra Research Articles

Surface molecular characterisation of different epoxy resin composites subjected to UV accelerated degradation using XPS and ToF-SIMS

Epoxy resin composites reinforced with E-glass (E), 3D glass (3D) and carbon fibre (CF) were subjected to an intense UV and high temperature accelerated degradation environment. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used to provide a molecular characterisation of the surface of the degraded composites. The response at the surface of the epoxy resin composites to oxidative degradation is influenced by the composite reinforcement type and characteristics. XPS results indicate that 3D resin composites exhibit more surface oxidation as a result of the accelerated degradation in comparison with E and CF composites. Principal components analysis (PCA) of the ToF-SIMS positive ion spectra showed that E and 3D resin composites suffered chain scission while CF composites suffered chain scission and cross-linking reactions as a result of the intense UV exposure. The extent of the surface oxidation, cross-linking/condensation reaction and loss of low molecular weight (lower than C 4H x ) aliphatic hydrocarbons may be indicated using PCA of both the ToF-SIMS positive and negative ion spectra. PCA also provides insight for proposing epoxy resin chain scission and oxidation reaction mechanisms.

Conversion of multiple analyte cation types to a single analyte anion type via ion/ion charge inversion

Charge inversion ion/ion reactions can convert several cation types associated with a single analyte molecule to a single anion type for subsequent mass analysis. Specifically, analyte ions present with one of a variety of cationizing agents, such as an excess proton, excess sodium ion, or excess potassium ion, can all be converted to the deprotonated molecule, provided that a stable anion can be generated for the analyte. Multiply deprotonated species that are capable of exchanging a proton for a metal ion serve as the reagent anions for the reaction. This process is demonstrated here for warfarin and for a glutathione conjugate. Examples for several other glutathione conjugates are provided as supplementary material to demonstrate the generality of the reaction. In the case of glutathione conjugates, multiple metal ions can be associated with the singly-charged analyte due to the presence of two carboxylate groups. The charge inversion reaction involves the removal of the excess cationizing agent, as well as any metal ions associated with anionic groups to yield a singly deprotonated analyte molecule. The ability to convert multiple cation types to a single anion type is analytically desirable in cases in which the analyte signal is distributed among several cation types, as is common in the electrospray ionization of solutions with relatively high salt contents. For analyte species that undergo efficient charge inversion, such as glutathione conjugates, there is the additional potential advantage for significantly improved signal-to-noise ratios when species that give rise to 'chemical noise' in the positive ion spectrum do not undergo efficient charge inversion.

Positive ion polymerization in hydrogen diluted silane plasmas

Mass spectra of positive ions (cations) and neutrals have been measured in hydrogen diluted silane plasmas at gas pressures of 0.1–10 Torr. The mass spectrum of ions changes with the pressure, while that of neutrals maintains a similar shape. The dominant ion species varies from a hydrogen ion group at ≲0.5 Torr to a monosilicon hydride ion group at ≈0.5–1 Torr and polysilicon hydride ion groups at ≳1 Torr, which is determined from ionization channels and consecutive ion-molecule reactions. The ion bombardment is suppressed with the pressure, from several tens of eV at ≲1 Torr to a few eV at ≳7 Torr.

MALDI-TOF “fingerprint” phospholipid mass spectra allow the differentiation between ruminantia and feloideae spermatozoa

The detailed comparative analysis of sperm lipids could essentially contribute to a better understanding of membrane function in the context of fertilization and, moreover, of sperm preservation. The application of sensitive analytical methods is particularly necessary for endangered species as the available amount of spermatozoa (and, accordingly, extractable lipids) is strongly limited. It will be shown that matrix-assisted laser desorption and ionization time-of-flight (MALDI-TOF) mass spectrometry (MS) is a fast, simple and sensitive method for the determination of the phospholipid composition of spermatozoa from several ruminantia (cattle, roe deer, Klipspringer) and feloideae species (domestic cat, Siberian tiger, fosa). Characteristic “fingerprints” are obtained from the positive ion spectra that allow the differentiation between both animal groups. In contrast to the lipid extracts of ruminantia spermatozoa which predominantly contain ether lipids including essential amounts of plasmalogens, the more complex phospholipid composition of feloideae spermatozoa is clearly dominated by diacyl phospholipids and contains only marginal amounts of plasmalogens. It will also be shown that the lipid compositions of ejaculated, electroejaculated and cauda epididymal spermatozoa of the same species are very similar and give comparable data. Therefore, the analysis of ejaculated spermatozoa is not an absolute must.

Rapid identification of triterpenoid saponins in the roots of Codonopsis lanceolata by liquid chromatography–mass spectrometry

Liquid chromatography coupled with sequential mass spectrometry (LC-MS(n)) has been used to identify 3,28-bidesmosidic triterpenoid saponins, lancemaside A (1), foetidissimoside A (2), aster saponin Hb (3), lancemaside E (4), lancemaside B (5), lancemaside F (6), lancemaside G (7), lancemaside C (8), and lancemaside D (9) in the roots of Codonopsis lanceolata. Structural information about both the aglycone and the sugar moiety at the C-3 position of saponins was obtained in the negative-ion mode. On the other hand, positive-ion spectra mainly provide structural information about the sugar chains of saponins, especially the oligosaccharide moiety at the C-28 position. During subsequent fragmentation of the product ions derived from the oligosaccharide moiety at the C-28 position, fragments produced by sequential loss of a monosaccharide unit were observed. Furthermore, the structural features of two unknown saponins in the roots of C. lanceolata were assigned on the basis of the fragmentation patterns of the known saponins. These studies demonstrate that LC-MS(n) analysis has great potential for the identification and characterization of triterpenoid saponins in plant extracts.

Time‐of‐flight secondary ion mass spectrometric analysis of the interface between bone and titanium implants

Implant healing into bone tissue is a process where the mature bone grows towards and eventually fuses with the implant. In this study we investigated implant healing during 4 weeks with focus on the implant-tissue interface. Our main interest was to study the mineralization process around the implant. Titanium discs were implanted in rat tibia for 2 and 4 weeks. After implantation cross sections of bone and implant were made using a low-speed saw equipped with a diamond wafering blade. One section from each sample was stained with basic fuchsin and micrographed by light microscopy (LM). The other section was analyzed with imaging time-of-flight secondary ion mass spectrometry (TOF-SIMS) using a Bi(3)(+) cluster ion source. This ion source has recently been shown to enable identification of high-mass hydroxyapatite (HA) fragment ions (m/z 291-653) in bone samples. The LM images were used to identify areas suitable for TOF-SIMS analysis. Three areas were selected for mass spectral analysis, corresponding to interface region, bone and soft tissue, from which positive ion spectra were recorded. In the areas identified as bone, high-mass HA fragments ions were found after both 2 and 4 weeks. In the soft tissue area, no high-mass ions were found after 4 weeks. However, after 2 weeks HA-related ions were identified in mineralized spots in areas defined as soft tissue. After 4 but not after 2 weeks, high-mass HA fragment ions were found in the interface region. In conclusion, differences were observed regarding mineralization between 2 and 4 weeks of implantation and between different regions surrounding the implants. Imaging TOF-SIMS analysis using a Bi(3)(+) cluster as ion source enables identification of high-mass HA fragment ions at implant-tissue interfaces in bone. This technique might therefore be useful for biocompatibility assessment and for studying the mineralization process at implant surfaces.

LC–high-resolution multiple stage spectrometric analysis of diuretic compounds: Unusual mass fragmentation pathways

The analysis of diuretic compounds has become of great concern because of their extensive use both in therapy and in illicit treatments (such as masking agents in sport doping and drug abuse). The variety of chemical structures of this class of drugs encouraged the development of new methods and techniques of analysis, especially as regards to acidic compounds. LC/MS has so grown to be the reference technique for this kind of analysis in forensic and anti-doping confirmation purposes. Multiple stage MS permits identification of single drugs with high selectivity, but some unexpected pathways could weaken the entire process. In this work we aim to explain some unusual fragmentation steps using high-resolution MS n . For example, in the case of amiloride an intense product ion in MS 3 analysis generates an apparent loss of 10 Da. Water adduct formation and successive carbon monoxide elimination can explain this uncommon behavior, which was studied using different ion traps. Bendroflumethiazide MS n spectra show instead three successive HF losses, in spite of the presence of a radical site in the parent structure. Homolytic cleavages with radical ion production occur also in the case of protonated positive ion of ethacrynic acid (loss of chlorine radical) showing that such fragmentation behavior is not so rare as generally reported. Different ionization modes were studied and a tentative correlation with acidic-base properties was done. Multiple stage high-resolution mass spectra of positive and negative ions were discussed.

Formation of High-Mass Cluster Ions from Compound Semiconductors Using Time-of-Flight Secondary Ion Mass Spectrometry with Cluster Primary Ions

The detection of high-mass, nonstoichiometric, GaxAsy and InxPy secondary ion clusters using time-of-flight secondary ion mass spectrometry is reported for the first time. The GaxAsy and InxPy clusters are detected in both positive and negative ion spectra and extend to masses of at least 6000 dalton (Da). Consecutive clusters differ by the addition of one gallium (indium) atom. This leads to nonstoichiometric clusters at high mass (i.e., Ga15As3 at 1270 Da) which are metastable above a critical mass. The relative secondary ion yields of high-mass GaxAsy clusters detected using several primary ion sources (Cs+, Bi+, Bi3+, Bi32+, Bi52+, C60+, and C602+) are compared. The relative secondary ion yield of high-mass GaxAsy clusters is significantly enhanced by the use of cluster primary ions and the best relative secondary ion yield is obtained using Bi3+ primary ions. An application of the high-mass GaxAsy clusters is presented, in which these clusters are utilized to distinguish between contaminant levels of Ga and bulk GaAs structure in a depth profile of a MnAs/GaAs heterojunction. These results illustrate improved analysis of inorganic materials using cluster primary ions and break the paradigm of stoichiometric secondary cluster ion formation for SIMS of inorganic compounds.

Ionic Liquid Matrixes Optimized for MALDI-MS of Sulfated/Sialylated/Neutral Oligosaccharides and Glycopeptides

1,1,3,3-tetramethylguanidium (TMG) salt of alpha-cyano-4-hydroxycinnamic acid (CHCA) (G(2)CHCA) was reported by Tatiana et al. as a useful ionic liquid matrix (ILM) for sulfated oligosaccharides to suppress the loss of sulfate groups. However, the report mainly referred to positive ion spectra only and amounts of 10 pmol or more of the analyte were used. Herein, we demonstrated highly sensitive detection of sulfated/sialylated/neutral oligosaccharides and preferential ionization of glycopeptides by optimizing a newly synthesized ILM: TMG salt of p-coumaric acid (G(3)CA) and the existing G(2)CHCA in both positive and negative ion extraction modes. Sulfated oligosaccharides were detected with high sensitivity (e.g., 1 fmol) in both ion extraction modes, and the dissociation of sulfate groups was suppressed especially using G(3)CA. Sialylated and neutral oligosaccharides were also detected with high sensitivity (e.g., 1 fmol) with positive ion extraction while the dissociation of sialic acids was suppressed especially using G(3)CA. Additionally, glycopeptide ions were detected preferentially using the ILMs among the digest of a glycoprotein, ribonuclease B, in both ion extraction modes but particularly in the negative ion mode. As a result, the use of optimized ILMs provides an effective method for carbohydrate analysis due to the highly sensitive soft-ionization achieved in both ion extraction modes as well as the homogeneity of analyte-matrix mixtures.

Structural and quantitative analysis of N-linked glycans by matrix-assisted laser desorption ionization and negative ion nanospray mass spectrometry

Negative ion electrospray (ESI) fragmentation spectra derived from anion-adducted glycans were evaluated for structural determination of N-linked glycans and found to be among the most useful mass spectrometric techniques yet developed for this purpose. In contrast to the more commonly used positive ion spectra that contain isobaric ions formed by losses from different regions of the molecules and often lead to ambiguous deductions, the negative ion spectra contain ions that directly reflect structural features such as the branching pattern, location of fucose, and the presence of bisecting GlcNAc. These structural features are sometimes difficult to determine by traditional methods. Furthermore, the spectra give structural information from mixtures of isomers and from single compounds. The method was evaluated with well-characterized glycans from IgG and used to explore structures of N-linked glycans released from serum glycoproteins with the aim of identifying biomarkers for cancer. Quantities of glycans were measured by ESI and by matrix-assisted laser desorption ionization mass spectrometry; each technique produced virtually identical results for the neutral desialylated glycans.

ToF‐SIMS study of 1‐dodecanethiol adsorption on Au, Ag, Cu and Pt surfaces

AbstractTime‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) has been used to perform a chemical analysis of long‐chain thiol (CH3(CH2)11SH)‐treated gold, silver, copper and platinum surfaces. All the mass peaks from positive and negative ion spectra within the range m/z = 0–2000 u are studied. ToF‐SIMS data revealed that on gold, silver and copper substrates 1‐dodecanethiol form dense standing‐up phases, but on platinum being a catalytically active substrate, we were able to identify also surface‐aligned parallel lying molecules in addition to a standing thiolate layer. Our study shows that when ToF‐SIMS spectra are analyzed, not only the existence of oligomers but also metal + hydrocarbon fragments give information about the order of SAM. Copyright © 2008 John Wiley & Sons, Ltd.

Influence of pH on the electrolytic deposition of Ni–Co films

Ni–Co alloys obtained by electrolytic deposition on a paraffin impregnated graphite electrode have been characterised by cyclic voltammetry, scanning electron microscopy with energy dispersive X-ray microanalysis, and time of flight secondary ion mass spectrometry (ToF–SIMS), with the objective of qualitatively assessing and comparing their composition and the distribution of chemical species. The effect of pH on the composition and morphology of the deposit and on the proportion of the hydrogenated forms of Ni and Co has been investigated. It has been determined that the predominant species, which give rise to the ToF–SIMS positive ion spectra of the deposits, are the pure metals, their hydrides, hydroxides and oxides as a hydrogen. In negative secondary ion spectra, the most favourable species were found to be: O, OH, as well as hydrides, hydroxides and hydrated ions of the two metals. The proportion of individual species changed depending on the electrolyte pH. The content of Co in the deposit corresponds to the content of Co in the electrolyte and increased moderately with increasing pH value, corresponding to the regular deposition behaviour of Ni–Co film rather than an anomalous deposition.

Ion-trap tandem mass spectrometric analysis of squalene monohydroperoxide isomers in sunlight-exposed human skin

We previously discovered that squalene monohydroperoxide (SQ-OOH) was produced on human forehead skin and suggested that skin squalene (SQ) may be the principal target lipid for oxidative stress (e.g., sunlight exposure). Because of its six double bonds, SQ peroxidation can yield various positional hydroperoxide isomers. However, the structural characterization of skin SQ-OOH isomers has never been reported. Here, we prepared pure SQ-OOH isomers and developed an analytical method for SQ-OOH isomers using a quadrupole/linear ion-trap mass spectrometer (QTRAP) MS/MS system. Collision-induced dissociation produced specific fragment ions for each SQ-OOH isomer, which permitted discrimination between SQ-OOH isomers by multiple reaction monitoring (MRM). When lipid extract from human forehead skin was subjected to LC-MS/MS with MRM, individual SQ-OOH isomers could be separated and detected with a sensitivity of 0.05 ng/injection. The total concentration of SQ-OOH isomers in forehead skin was approximately 956 microg/g skin lipids, but it increased up to 2,760 microg/g skin lipids after 3 h of sunlight exposure. The LC-MS/MS method was useful for investigating the peroxidation mechanisms of SQ as well as SQ-OOH-mediated skin disorders.

Laser-induced polymerization of SiI4

Abstract The laser-induced polymerization of powdered SiI 4 has been investigated by time-of-flight (TOF) mass spectroscopy combined with density functional theory (DFT) calculations. In the positive ion spectra, three series of abundant clusters ( Si n I 2 n + 1 + ( n = 1–6), Si n I 4 n / 3 + 3 + ( n = 7–15), Si n I 3 n / 2 - 7 + ( n = 16–22)) were observed. DFT calculations have revealed that the abundant clusters are straight chains with iodine bridge in n = 1–6, multi-cyclic rings of pentagons in n = 7–15, and cages constructed by pentagons and hexagons in n = 16–22. A silicon-rich six-membered ring, i.e., an unsaturated ring like benzene, was detected in less abundant clusters

A rapid, small-scale procedure for the structural characterization of lipid A applied to Citrobacter and Bordetella strains: discovery of a new structural element

Endotoxins [lipopolysaccharides (LPSs)] are part of the outer cell membrane of Gram-negative bacteria. Their biological activities are associated mainly with the lipid component (lipid A) and even more specifically with discrete aspects of their fine structure. The need for a rapid and small-scale analysis of lipid A motivated us to develop a procedure that combines direct isolation of lipids A from bacterial cells with sequential release of their ester-linked fatty acids by a mild alkali treatment followed by MALDI-MS analysis. This method avoids the multiple-step LPS extraction procedure and lipid A isolation. The whole process can be performed in a working day and applied to lyophilized bacterial samples as small as 1 mg. We illustrate the method by applying it to the analysis of lipids A of three species of Citrobacter that were found to be identical. On the other hand, when applied to two batches of Bordetella bronchiseptica strain 4650, it highlighted the presence, in one of them, of hitherto unreported hexosamine residues substituting the lipid A phosphate groups, possibly a new camouflage opportunity to escape a host defense system.

ESI-MS analyses of lake dissolved organic matter in light of supramolecular assembly

A high-performance size-exclusion chromatography (SEC) system was coupled on-line to an electrospray ionization (ESI) interface to detect gas-phase ions by an API 365 LC/MS/MS triple quadrupole analyzer. The SEC fractions of a strongly coloured freshwater solution containing dissolved organic matter-humic substances (DOM-HS) were screened both by UV(254) and by ESI mass spectrometry (ESI-MS) in the full-scan mode within the m/z range of 100-2,900 amu in negative and positive polarities. The ESI-MS spectra were also collected by direct infusion of the DOM-HS solution in both polarities. ESI-MS spectra did not primarily favour low mass compounds, and negative and positive total ion chromatograms were parallel to the SEC elution profile obtained by UV(254) detection from DOM-HS solution. The UV(254) detection overestimated the SEC portion of higher size/mass solutes and underestimated that of solutes of smaller sizes/masses as compared with the total ion chromatogram intensities in negative or positive polarities. The change of mass-weighted and number-weighted average sizes/masses (M(w) and M(n)) of different SEC fractions was fairly small, in contrast to UV(254) detection, with increasing elution volume. A reasonable explanation for the great differences between M(w) and M(n) values, obtained by UV(254) and ESI-MS detections for eight different SEC fractions, seems to be a supramolecular-type association of relatively small components through weak dispersive forces. M(n) values obtained by vapour-pressure osmometry for different SEC fractions were to some extent analogous with those of negative and positive ESI-MS. The shapes obtained by either negative or positive polarities and calculated M(w) and M(n) values indicated a close structural similarity between each SEC fraction. Positive ion and negative ion spectra of different humic fractions represented quite similar components, and there was no evidence for noteworthy occurrence of multiply charged ions being able to lower mass distributions of negative ion spectra. The effect of nitrogen on the mass spectra seemed to be unimportant, and the weak ions observed at even m/z values correspond most likely to the (13)C counterparts of the more abundant (12)C odd ions. No uncontrolled ESI fragmentation was observable and humic solutes seemed to be quite heat-resistant. Direct infusion of the untreated DOM-HS solution and statistical calculation verified that the SEC-separated different fractions really represent distinct entities of the original DOM-HS mixture. ESI-MS results support the opinion that the structural composition of humic solutes in their original combined mixture resembles supramolecular-type associations of smaller molecular size entities possessing similar structural functionalities.

MALDI-TOF Mass Spectrometric Identification of Dyes and Pigments

We have used MALDI-TOF mass spectrometry to characterize a selection of dyes from the Schweppe dye collection and pigments from the Tate Gallery collection. MALDI-TOF mass spectra of such samples are easily obtained and, through observation of both positive and negative ion spectra, provide a convenient, versatile method for dye characterization and identification. Such pairs of positive and negative ion spectra immediately distinguish between acidic and basic dyes and provide the characteristic mass of either the molecular ion or a simply related fragment ion. This approach is especially useful in situations where very small amounts of analyte are available, as in museum research and forensic analysis. In the case of textile dyes, we have carried out identification on material from single fibers and, with insoluble pigments, have begun to identify components of historically important pastel sticks from submicrogram samples.

Mass spectral studies of meso‐dialkyl, alkyl aryl and cycloalkyl calix(4)pyrroles under positive and negative ion electrospray ionization conditions

A series of meso-dialkyl, alkyl aryl and cycloalkyl calix(4)pyrroles (1-15) are studied under positive and negative ion electrospray ionization (ESI) conditions. The positive ion spectra show abundant [M + H](+) and [M + Na](+) ions and the negative ion spectra show the [M + Cl](-) (the Cl(-) ions from the solvent) and [M - H](-) ions. The collision induced dissociation (CID) spectra of [M + H](+), [M + Na](+), [M + Cl](-) and [M - H](-) ions are studied to understand their dissociation pathway and compared to that reported for M(+) under electron ionization (EI) conditions. The beta-cleavage process that was diagnostic to M(+) is absent in all the CID spectra of the ions studied under ESI. Dissociation of all the studied ions resulted in the fragment ions formed by sequential elimination of pyrrole (A) and/or dialkyl/alkyl aryl/cycloalkyl (B) groups involving hydrogen migration to pyrrole ring at each cleavage of A--B bond, which clearly reveals the arrangement of A and B groups in the calix(4)pyrroles. The source of hydrogen that migrates to pyrrole ring during A--B bond cleavage is investigated by the experiments on deuterated compounds and [M + D](+) ions; and confirmed that the hydrogen attached to pyrrole nitrogen, hydrogen on alpha-carbon of alkyl group and the H(+)/Na(+) ion that added during ESI process to generate [M + H](+)/[M + Na](+) ions involve in the migration. The yields of [M + Na](+) ions are found to be different for the isomeric meso-cycloalkyl compounds (cycloheptyl, and 2-, 3- and 4-methyl cyclohexyl) and for normal and N-confused calix(4)pyrroles. The isomeric methyl and 3-hydroxy/4-hydroxy phenyl calix(4)pyrroles show specific fragmentation pattern during the dissociation of their [M - H](-) ions.

Powerfully Solvating Matrices for MALDI-TOF Spectroscopy of Aromatic Polyesters

The starting premise of this work was that matrices containing powerfully solvating groups would enhance the quality of MALDI-TOF spectra of condensation polymers. The solvating groups in these matrices would pry the polymer aggregates apart and make it easy for individual ionized polymer molecules to “fly”. Ten polyfluorinated azobenzenes and stilbenes were synthesized. The laser desorption ionization spectra of the pure fluorinated matrices show the formation of radical cations (M•+) and anions (M•-) in addition to the more conventional [M + H]+ and [M−H]- ions. Dimerization followed by loss of fluorine is also observed. The effectiveness of these compounds as MALDI matrices was tested with four aromatic polyesters: poly(3-ethyleneoxybenzoate) (3EOB), Vectra, poly(1,4-dimethylenecyclohexane terephthalate) (CHDT), and poly(ethylene terephthalate) (PET). The azobenzene-containing matrices were much better than their stilbene analogues and gave good quality positive ion spectra, better than those obtained...

Speciation of Nitrogen Containing Aromatics by Atmospheric Pressure Photoionization or Electrospray Ionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

We determine the elemental compositions of aromatic nitrogen model compounds as well as a petroleum sample by atmospheric pressure photoionization (APPI) and electrospray Ionization (ESI) with a 9.4 Tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. From the double-bond equivalents calculated for the nitrogen-containing ions from a petroleum sample, we can infer the aromatic core structure (pyridinic versus pyrrolic nitrogen heterocycle) based on the presence of M(+.) (odd-electron) versus [M+H](+) (even-electron) ions. Specifically, nitrogen speciation can be determined from either a single positive-ion APPI spectrum or two ESI (positive- and negative-ion) spectra. APPI operates at comparatively higher temperature than ESI and also produces radical cations that may fragment before detection. However, APPI fragmentation of aromatics can be eliminated by judicious choice of instrumental parameters.