Polycyclic Aromatic Hydrocarbons Pollution Research Articles

Catalyzed degradation of polycyclic aromatic hydrocarbons by recoverable magnetic chitosan immobilized laccase from Trametes versicolor.

The capability of laccase to oxidate a broad range of polyphenols and aromatic substrates in vitro offers a new technological option for the remediation of polycyclic aromatic hydrocarbon (PAH) pollution with high cytotoxicity. However, laccase application in the remediation of PAH-contaminated sites mainly suffers from a low oxidation rate and high cost because of the difficulty in its recovery. In this study, laccases were immobilized on magnetic Fe3O4 particles coated with chitosan (Fe3O4@SiO2-chitosan) to improve the operational stability and reusability in the treatment of PAH pollution. The enzyme fixation capacity reached 158mg g-1, and 79.1% of free laccase activities were reserved under the optimum immobilized condition of 4% glutaraldehyde, 1.0mg mL-1 laccase, 2 h covalent bonding time, and 6 h fixation time. The degradation efficiencies of anthracene (ANT) and benzo[a]pyrene (B(a)P) by Fe3O4@SiO2-chitosan immobilized laccase in 48h were 81.9% and 69.2%, respectively. Furthermore, it is very easy to magnetically recover the immobilized laccase from reaction systems and reuse it in a new batch. The relative activities of immobilized laccase were over 50% for the degradation of ANT and B(a)P in three catalytic runs, reaching the goal of substantially reducing cost in practice. According to the results from quantum calculations and mass spectrum analyses, the degradation products of ANT and B(a)P by laccase were anthraquinone and B(a)P-dione, respectively. The findings from this study provide valuable insight in promoting the application of immobilized laccase technology in the remediation of PAH contamination.

Growth Response, Enrichment Effect, and Physiological Response of Different Garden Plants under Combined Stress of Polycyclic Aromatic Hydrocarbons and Heavy Metals

The combined pollution of heavy metals and polycyclic aromatic hydrocarbons is very common in China and needs urgent addressal. The use of resistant garden plants for phytoremediation accounts for both ecological restoration and ornamental value and has great application potential. In this study, cadmium (Cd) and pyrene (Pyr) were used as contaminants, and the growth responses, enrichment characteristics, and physiological responses of common garden plants were studied using greenhouse pot experiments. The Cd-Pyr compound stress affected the growth responses of plants. Chinese Pennisetum and lotus exhibited the best Cd-Pyr removal effect: the removal rates of Cd were 68.91% and 60.25%, respectively, and those of Pyr were 77.52% and 63.74%, respectively. Compound stress promoted the protective enzymes of ryegrass, lotus, and Chinese Pennisetum. Malondialdehyde (MDA) content in the leaves of the five plants was higher than that in the control group, whereas the chlorophyll and carotenoid content were lower. Overall, the order of resistance of the five garden plants tested under Cd-Pyr compound stress was: Chinese Pennisetum, lotus > ryegrass > Hemerocallis, Purple Coneflower.

Personal PM2.5-bound PAH exposure and lung function in healthy office workers: A pilot study in Beijing and Baoding, China

The effect of short-term exposure to polycyclic aromatic hydrocarbons (PAHs) on the respiratory system among healthy residents is unclear. Beijing and Baoding are typical polluted cities in China, and there is little research on PAH exposure and its health effects at the individual level. Fourteen healthy female office workers were recruited in urban Beijing and Baoding, China, in 2019. The personal exposure to fine particulate matter (PM2.5)-bound PAHs and lung function were seasonally monitored. The relationships between PAH exposure and lung function were determined by a generalized mixed linear model. Subjects were exposed to high levels of PAH, in which the benzo[a]pyrene (BaP) level (1.26 ng/m3) was over than Chinese national indoor standard (1 ng/m3). All PAHs concentration was higher in winter than that in summer and autumn. Only benz[a]anthracene (BaA) and chrysene (Chr) exposure showed weak relations with decreased lung function, i.e., a 0.58% and 0.73% decrease in peak expiratory flow at lag 2 day, respectively (p < 0.05). PAHs may not be suitable exposure indicators for short-term change in lung function. Our findings highlight the importance of reducing PAH pollution for public respiratory health protection in heavy-polluted cities of China. This pilot study also provides experience on personal PAH assessment such as estimation of the number of repeated measurements required, which is helpful to determine the relationship between PAH exposure and health effect.

The Determination of Polycyclic Aromatic Hydrocarbons (PAHs) with HPLC-DAD-FLD and GC-MS Techniques in the Dissolved and Particulate Phase of Road-Tunnel Wash Water: A Case Study for Cross-Array Comparisons and Applications.

Accelerated solvent extraction (ASE) and solid phase extraction (SPE) protocols tailored to either gas chromatography mass spectrometry (GC-MS) or high-performance liquid chromatography coupled to diode-array and fluorescence detection (HPLC-DAD-FLD) were developed for the determination of EPA 16 polycyclic aromatic hydrocarbons (PAHs) in the particulate and dissolved phase of road-tunnel wash water. An analytical approach was developed, assessed, and applied on environmental samples collected from five road tunnels in Norway. The absolute recoveries ranged from 57 to 104% for the particulates, and from 42 to 79% for the dissolved water phase. The target PAH compounds were separated in 34.75 min using the GC method and in 22.50 min by HPLC. In the particulate phases, higher molecular weight PAHs were detected in the range of 0.043 to 0.93 µg/g, and lower molecular weight PAHs were detected in the range of 0.020 to 1.0 µg/g, while the intermediate ones were present in the range of 0.075 to 2.0 µg/g. In contrast to the particulates, the dissolved phase mainly contained lower molecular weight PAHs in the range of 0.0098 to 0.50 µg/L. GC-MS demonstrated lower detection limits (LODs) than HPLC-DAD-FLD for 13 out of the 16 PAHs. A cross-array comparison of the two analytical techniques indicated that some target PAHs were detected solely or in higher concentrations with HPLC-DAD-FLD, indicating the occurrence of false positive peaks or/and co-eluting components. The resulting concentrations in the road tunnel wash water samples were used to calculate specific PAH forensic ratios to pinpoint the potential sources of PAH pollution. These ratios revealed that there are several potential sources for the origin of PAHs in tunnel wash water.

Spatiotemporal Distribution and Source Apportionment of Suspended Polycyclic Aromatic Hydrocarbons in Surface Water

Polycyclic aromatic hydrocarbons (PAHs) are a type of typical environmental pollutant with carcinogenic effects and high ecological risk. With the development of industry, surface water acts as a primary sink for PAHs. Owing to their low solubility, a significant amount of PAHs are adsorbed onto suspended particulate matter in surface water, which presents a serious risk to human health and the ecological environment. To protect human health and aquatic organisms, a systematic assessment of the trends in PAHs exposure risk is essential. Based on long-term monitoring data from 2002 to 2016, this study systematically evaluated the spatiotemporal distribution and source apportionment of PAHs adsorbed on suspended particulate matter in surface water. The results of the Mann-Kendall test indicated that pollution levels of PAHs decreased from 2012 to 2016. The maximum average content was 6239 μg·kg-1, and the minimum was 2760 μg·kg-1. Benzo(b)fluoranthene, benzo(k)fluoranthene, chrysene, and benzo(a)anthracene showed significant declines from 2002-2016 (P<0.05). Levels of benzo(a)pyrene, dibenzo(a,h)anthracene, and indeno(1,2,3-cd)pyrene were steady. Wavelet analysis showed that the pollution level of PAHs had significant periodic oscillations for surface water. Midstream and downstream Σ16PAHs showed significant declines from 2002-2016 (P<0.05), whereas upstream Σ16PAHs were steady. ANOVA analysis showed that the spatial difference was significant and occurred in the following order:midstream (6168 μg·kg-1)>upstream (5407 μg·kg-1)>downstream (3412 μg·kg-1). Diagnostic ratio analysis and the positive matrix factorization model suggested that the major sources of PAHs were traffic sources, coal burning sources, and biomass combustion sources, which accounted for 40.9%, 33.7%, and 25.4%, respectively. The contribution of traffic sources decreased by 25.9%. The contributions of coal burning sources and biomass combustion sources increased by 4.8% and 21.1% from 2002-2009 to 2010-2016, respectively. These results provide scientific reference for risk analysis and the control of PAHs pollution in surface water.

Inhibition of polycyclic aromatic hydrocarbon (PAHs) release from sediments in an integrated rice and crab coculture system by rice straw biochar

As persistent organic pollutants that are widely present in the environment and that pose substantial threats to human health, polycyclic aromatic hydrocarbons (PAHs) have received much attention from researchers around the world, but few studies have investigated the PAHs contamination of sediments in rice and crab coculture farming systems. In this study, rice straw biochar was prepared from rice straw, an abundant agricultural waste product, under oxygen-limited conditions at 500 °C. The rice straw biochar was characterized by scanning electron microscopy (SEM), specific surface and pore size analysis (BET), Fourier transform infrared spectroscopy (FTIR), and Raman Spectroscopy. The effect of using rice stalk biochar as a sorbent on the inhibition of the release and migration of PAHs from sediments in a rice and crab coculture system and the biological effects of PAHs within the system were studied for the first time. The results showed that rice straw biochar has a rich pore structure and high specific surface area, and the high-temperature charring method utilized in this study improved the charring and aromaticity of rice straw. The addition of rice straw biochar increased the immobilization of PAHs in sediments by 40.41%–119.62% and inhibited the migration of PAHs from the sediments to the overlying water, which reduced the PAHs content of the pore water at the sediment-water interface by 11.41%–58.73% and reduced the PAHs content of the overlying water in the dissolved and particulate forms by 54.67%–81.03% and 5.08%–55.20%, respectively. The addition of rice straw biochar reduced the biological effectiveness of PAHs in the system, and the enrichment of PAHs in crabs and rice decreased by 38.17–69.53% and 32.12%–97.63%, respectively. In addition, rice straw biochar changed the distribution of PAHs in rice, increasing the PAHs content of the stalks and leaves of rice by 2%–15% and 4%–17%, respectively, while the PAHs content of the roots was reduced by 8%–20%. These results confirm that rice straw biochar can effectively inhibit the migration and release of PAHs from sediments and reduce the bioavailability of phenanthrene (PHE) in integrated farming systems. The results provide theoretical and technical support for the study of straw waste utilization and remediation of PAHs pollution.

Polycyclic aromatic hydrocarbons in urban and industrial soils of Kerman, the largest city in southeast of Iran: status, source apportionment, ecotoxicology, and health risk assessment

ABSTRACT In this study, pollution level, distribution, toxicity, molecular composition, probable sources as well as health risks of polycyclic aromatic hydrocarbons (PAHs) in urban and industrial soils of Kerman metropolis were investigated. Kerman is a fast-growing city and a fine example of an arid city in a developing country. For this purpose, concentrations of 16 individual PAHs in 30 samples taken from the city soils and its industrial zones were determined by gas chromatography/mass spectrometry. The ∑PAHs concentration in urban soil samples varied from 26.1 to 902.8 μg/kg, with the mean and median of 302.6 and 148.4 µg/kg, respectively. In comparison, ∑PAHs in industrial soils ranged from 26.8to 251.9 μg/kg, with the mean and median values of 65.9 and 42.9 µg/kg, respectively. Four-ring PAHs comprise the dominant compounds in urban soils, whereas, two- and three-ring PAHs proved to be the most abundant compounds in industrial soils. Source apportionment was conducted using ring classification, diagnostic ratios, PCA, and multilinear regression (MLR). Also, human health risk assessment was undertaken through employing US EPA standard statistical models. This survey revealed that PAH pollution in urban soils originates mainly from fossil fuel combustion and in industrial soils from petrogenic sources. On the whole, in the Kerman environment, the shares of petroleum combustion, natural gas combustion, and petrogenic sources were 45.32%, 34%, and 20.68% respectively. Based on this study, the ecological risk of PAHs was low-to-moderate, and incremental lifetime cancer risk for children and adults were 1.35 × 10−4 and 1.04 × 10−4 respectively, indicating rather high risks.

Molecular Examination of Polycyclic Aromatic and Total Petroleum Hydrocarbons in Soot in Port Harcourt Metropolis Using Advanced Analytical Instruments

A short-term study was carried out to comparatively evaluate the polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs) in soot evading Port Harcourt and its environs. Samples were collected from three (3) different locations namely; Eleme Petrochemicals, Rumuodomaya Town, and University of Port Harcourt (Uniport) to determine the level of residual polycyclic aromatic hydrocarbons and total petroleum hydrocarbons in soot as dispersed from source to the troposphere. The evaluation was carried out using Gas Chromatography Flame Ionization Detector (GC-FID) and Gas Chromatography-Mass Spectrometer (GC-MS). Soot particles collected from the various locations were trapped in a tenax Gas Chromatography adsorbent tube for Gas chromatography analysis. The total petroleum hydrocarbons were analyzed according to ASTMD 3911. The result of polycyclic aromatic hydrocarbons obtained from Eleme Petrochemicals (0.04 mg/m 3 ), Rumuodomaya Town (0.02 mg/m 3 ), and University of Port Harcourt (0.01 mg/m 3 ) were below the permissible limit of World Health Organization (W.H.O.) standard for work place of 0.2 mg/m 3 . This indicates that areas under study were free from polycyclic aromatic hydrocarbons pollution. However, the values of total petroleum hydrocarbons which has no regulatory limit for soot showed high values of 21.44 mg/m 3 (Eleme Petrochemicals), 18.91 mg/m 3 (Rumuodomaya Town), and 12.68 mg/m 3 (University of Port Harcourt). This suggests that the weight of total petroleum hydrocarbons inhaled by humans and deposited on the body were unsafe. This study recommends safety measures to be taken to reduce emissions of this menace and steps to be taken by the residents to stay healthy in Port Harcourt and its environs.

Recent advances in the treatment of PAHs in the environment: Application of nanomaterial-based technologies

Polycyclic aromatic hydrocarbons (PAHs) are one of the most frequent petroleum hydrocarbons detected in the environment. PAHs are receiving global attention due to their toxicity, environmental persistence, and potential bioaccumulation. PAHs contamination occurs mainly due to anthropogenic sources related to the disposal of industrial and domestic run-offs or atmospheric emissions from plants or vehicles. Once PAHs are introduced into the environment, they undergo different processes either physical, chemical, or biological transformations, which are collectively known as weathering processes. These weathering processes are highly dependent on the nature and the physiochemical properties of PAHs molecules and the surrounding environment, which eventually will determine their transport, fate, and distribution in the environment either through adsorption to soil/sediments, or volatilization to the atmosphere, or dissolution in the water. Different treatment strategies for PAHs pollution have been introduced. Each remediation technology has its advantages and disadvantages. To choose a treatment, a full analysis of the case study should be provided, including the properties of the target pollutant, site description, and treatment procedure. As the treatment of PAHs contaminated sites is usually a difficult and expensive task, it would be a good choice to go for treatment, which is adaptive, sustainable, eco-friendly, efficient, and cost-effective. In this review, the transport, fate, and distribution processes of PAHs in the environment with their dependent factors were elaborated. In addition, this paper provided an overview of different traditional and advanced potential treatment approaches used to treat PAHs-contaminated sites such as thermal, chemical, electrokinetic, nano-adsorption, and biological treatments.

Evaluation of DNA Damage in Traffic Cops Exposed to Polycyclic Aromatic Hydrocarbon Pollution in Baghdad City Streets and its Association to Certain Biomarkers

Objectives: To find out the extent to which the genetic material of Baghdad traffic policemen is affected by the oxidative damage caused by pollutants by monitoring the levels of 8-OHdG compared to the levels of antioxidant enzymes and malondialdehyde.&#x0D; Methods: This study includes 140 participants; they have been divided into two groups (traffic police and office police). Polycyclic aromatic hydrocarbons were analyzed for each participant by GC/FID while 8-OHdG and antioxidant enzymes were measured by the ELISA technique.&#x0D; Results: The levels of polycyclic aromatic hydrocarbons, 8-Oxo-dG, and malondialdehyde were elevated in the blood of the traffic police compared to the office police, while higher levels of antioxidant enzymes (Catalase and glutathione peroxidase) were observed in the blood of the office police. &#x0D; Conclusion: Exposure to polycyclic aromatic hydrocarbones can cause oxidative stress through their metabolic derivatives and the resulting active molecules, which lead to the formation of 8-Oxo-dG and the reduction of enzymatic antioxidants, which may lead to the emergence of cancers.

Engineering Pseudomonas putida To Produce Rhamnolipid Biosurfactants for Promoting Phenanthrene Biodegradation by a Two-Species Microbial Consortium.

ABSTRACTPolycyclic aromatic hydrocarbons (PAHs) are a group of organic contaminants that pose a significant environmental hazard. Phenanthrene is one of the model compounds for the study of biodegradation of PAHs. However, the biodegradation of phenanthrene is often limited by its low water solubility and dissolution rate. To overcome this limitation, we engineered a strain of Pseudomonas putida to produce rhamnolipid biosurfactants and thereby promote phenanthrene biodegradation by an engineered strain of Escherichia coli constructed previously in our lab. The E. coli-P. putida two-species consortium exhibited a synergistic effect of these two distinct organisms in degrading phenanthrene, resulting in an increase from 61.15 to 73.86% of the degradation ratio of 100 mg/L phenanthrene within 7 days. After additional optimization of the degradation conditions, the phenanthrene degradation ratio was improved to 85.73%.IMPORTANCE Polycyclic aromatic hydrocarbons (PAHs), which are recalcitrant, carcinogenic, and tend to bioaccumulate, are widespread and persistent environmental pollutants. Based on these characteristics, the U.S. Environmental Protection Agency has listed PAHs as priority contaminants. Although there are many methods to treat PAH pollution, these methods are mostly limited by the poor water solubility of PAHs, which is especially true for the biodegradation process. Recent evidence of PAH-contaminated sites suffering from increasingly severe impact has emerged. As a result, the need to degrade PAHs is becoming urgent. The significance of our study lies in the development of nonpathogenic strains of biosurfactant-producing Pseudomonas aeruginosa for promoting the degradation of phenanthrene by engineered Escherichia coli.

Polycyclic aromatic hydrocarbons (PAHs) and antibiotics in oil-contaminated aquaculture areas: Bioaccumulation, influencing factors, and human health risks

Polycyclic aromatic hydrocarbon (PAH) pollution caused by marine oil spills and antibiotic pollution caused by aquaculture industries were common environmental problems in the Yellow River Estuary, China. But few data are reported on the bioaccumulation and influencing factors of these two types of contaminants in aquaculture simultaneously. This study investigated the occurrence and bioaccumulation of PAHs and antibiotics in aquaculture areas of the Yellow River Estuary, and explored the factors affecting the bioaccumulation. 3-ring PAHs and fluoroquinolones were dominant contaminants in the study area. The concentrations of PAHs and antibiotics in lipid-rich tissues (fish viscus, shrimp head, and crab ovary) was higher than that in muscle. It indicated that the lipid content was an important factor affecting the bioaccumulation capacity. Physicochemical parameters (Kow and Dlipw) and the concentrations of PAHs or antibiotics also affected the bioaccumulation capacity of them. Meanwhile, biotransformation was a factor affecting the bioaccumulation of PAHs and antibiotics. The biotransformation (pyrene to 1-hydroxypyrene and enrofloxacin to ciprofloxacin) might explain the poor correlation between log bioaccumulation factor and log Kow/log Dlipw in fish. Risk assessment indicated that PAHs in mature aquatic products posed carcinogenic risks to human and enoxacin in sea cucumbers posed health risks to human.

Ecological risk assessment of priority PAHs pollutants in crude oil contaminated soil and its impacts on soil biological properties

Polycyclic aromatic hydrocarbons (PAHs) are one of the major toxic constituents of crude oil and therefore, an understanding on PAHs associated risks and their relationship with soil biological parameters are necessary for adopting effective risk-based and site specific remediation strategies in the contaminated soil. Here, risks evaluation of eight detected PAHs in terms of toxic equivalent concentration (TEQC), benzo(a)pyrene equivalent (BaPeq), contamination factor (CF), pollution load index (PLI), hazard quotient (HQ), hazard index (HI), toxic unit for individual PAHs (TU) and PAHs mixture (TUm) have been evaluated. Besides, the effect of PAHs contamination on soil biological properties has also been investigated and correlated with PAHs concentrations. The TEQc of eight PAHs was recorded in the range of 0.06–5.0 mg kg−1 soil, whereas the BaPeq value was 25.3 mg kg−1 soil which exceed the permissible limit. Similarly, CF (85.5–1668.2), PLI (322.8), HQ (311.7–8340.9), HI (26,443.8), TU (227.9–3821.6) and TUm(7916.2) also exceed the permissible values for non-toxic conditions indicating carcinogenic risk for humans. Besides, activities of soil dehydrogenase, urease, alkaline-phosphatase, catalase, amylase and cellulase were decreased by 1.5–2.3 folds in the contaminated soil than control. The results of Pearson’s correlation matrix also established negative impact of PAHs on the soil's biological properties.

Biodegradation of naphthalene by biocatalysts isolated from the contaminated environment under optimal conditions

Polycyclic aromatic hydrocarbons (PAHs) pollution occurs in freshwater and marine environment by anthropogenic activities. Moreover, analysis of the PAHs-degradation by the indigenous bacterial strains is limited, compared with other degraders. In this study, naphthalene (NAP) biodegrading bacteria were screened by enrichment culture method. Three bacterial strains were obtained for NAP degradation and identified as Bacillus cereus CK1, Pseudomonas aeruginosa KD4 and Enterobacter aerogenes SR6. The amount of hydrogen, carbon, sulphur and nitrogen of wastewater were analyzed. Total bacterial count increased at increasing incubation time (6–60 days) and moderately decreased at higher NAP concentrations. The bacterial population increased after 48 days at 250 ppm NAP (519 ± 15.3 MPM/mL) concentration and this level increased at 500 ppm NAP concentration (541 ± 12.5 MPM/mL). NAP was degraded by bacterial consortium within 36 h–99% at 30 °C. PAHs degrading bacteria were grown optimally at 4% inoculum concentrations. Bacterial consortium was able to degrade 98% NAP at pH 7.0 after 36 h incubation and degradation potential was improved (100%) after 34 h (pH 8.0). Also at pH 9.0, 100% biodegradation was registered after 36 h incubation. When the agitation speed enhanced from 50 ppm to 150 ppm, increased bacteria growth and increased NAP degradation within 42 h incubation. Among the nutrient sources, beef extract, peptone and glucose supplemented medium supported complete degradation of PAHs within 30 h, whereas peptone supported 94.3% degradation at this time. Glucose supplemented medium showed only 2.8% NAP degradation after 6 h incubation and reached maximum (100%) within 42 h incubation. Bacterial consortium can be used to reduce NAP under optimal process conditions and this method can be used for the removal of various hydrocarbon-compounds.

Pollution Characteristics and Risks of Polycyclic Aromatic Hydrocarbons in Underground and Surface Drinking Water Sources in Northeast Inner Mongolia

Polycyclic aromatic hydrocarbons (PAHs) are hazardous and ubiquitous pollutants in the aquatic environment, and understanding the pollution characteristics and risk levels of PAHs is of great significance to the sustainable development of drinking water sources and drinking water safety. Hence, PAHs residues were measured qualitatively and quantitatively with solid-phase extraction-gas chromatography-mass spectrometry (SPE-GC-MS) in 33 water samples (including 22 groundwater and 11 surface water samples) of the drinking water sources in the Manzhouli and Xinyouqi areas of northeast Inner Mongolia, and assessments of the pollution level of PAHs and the health and ecological risks were carried out. The results showed that PAHs were detected in all 33 sampling points of Manzhouli drinking water sources, except for benzo[k] fluoranthene, benzo[a] pyrene, and dibenzo[a,h] anthracene, with detection rates ranging from 36.36% to 95.45%; the detection rates of the other 13 PAHs monomers were 100%. The detection range of ρ（ΣPAHs） was 42.76-164.50 ng·L-1, and the mean value was 90.82 ng·L-1. The detection ranges of ρ（ΣPAHs） in surface water and groundwater were 66.39-164.50 ng·L-1 and 42.76-147.70 ng·L-1, respectively. The concentration of the detected naphthalene was the highest, with a mean value of 36.91 ng·L-1, and the concentration of anthracene was the lowest, with a mean value of 0.81 ng·L-1; there were no significant differences among the concentrations of all the PAHs monomers of the surface and groundwater (P>0.05). The pollution of PAHs was at a median level in China and abroad, mainly in the middle and low loops (3-4 loops). The analysis of the sources of PAHs in groundwater and surface water in Manzhouli using the ratio feature method and principal component analysis showed that the PAHs in the drinking water source water bodies in the Manzhouli area were mainly affected by the combustion of coal and biomass and oil, and some surface water sources were affected by the oil source. The human health and ecological risk assessment results showed that the water body of drinking water would not cause health risks to the human body, and the ecological risk was at a medium level; however, the high risk of benzo[b] fluoranthene (BbF) monomer production should be continuous cause for concern. From the perspective of the sustainable development of drinking water sources and drinking water safety, the necessary supervision and protection measures should be considered to prevent further pollution. The results of this research provide a scientific basis for the pollution control and prevention and control of PAHs in drinking water sources.

Remediation of polycyclic aromatic hydrocarbon-contaminated soils using microbes and nanoparticles: A review

Polycyclic aromatic hydrocarbon (PAH) pollution is a global concern because of their toxicity to environment and ecosystem, which induces adverse effects on plants, animals, and humans. Hydrocarbons are mainly released from natural and anthropogenic activities, such as incomplete fuel combustion, leakages in oil pipelines, and the extensive use of pesticides; PAH contaminants include petroleum hydrocarbons (PHCs), halogenated hydrocarbons, chlorophenols, and pesticides. Bioremediation using microorganisms such as bacteria and fungi is developing as an effective and promising technique to remediate PAHs from the environment. Owing to their remediation efficiency, this method is environmentally friendly and represents a novel approach for reducing the risk of PAHs to human health and the ecosystem. Nanoparticles may be applied in bioremediation, and will not only induce fewer toxic effects but also reduce the effective overall time and costs involved. This article provides a summary of the application of nanomaterials, bacteria, and fungi to PAH remediation; we review and briefly discuss the structure, properties, sources, fate, toxicity, and remediation approaches involved in the remediation of PAH-polluted sites.

Occurrence of polycyclic aromatic hydrocarbons in the estuarine sediments of the Taihu Lake and their associated toxic effects on aquatic organisms

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous toxic organic pollutants in the natural environment that are strongly associated with socioeconomic activities. Exploring the distribution, sources, and ecological toxicity of PAHs is essential to abate their pollution and biological risks. Sixteen priority PAHs in different lakeside city estuarine sediments in northern Taihu Lake in China were determined by gas chromatography-mass spectrometry. Results showed that total concentrations of PAHs (ΣPAHs) ranged from 672.07 to 5 858.34 ng g -1 , with a mean value of 2 121.37 ng g -1 . High-molecular-weight PAHs (4–6 rings) were dominant, accounting for 85% of the ΣPAHs detected. Due to the barrier of gate/dam in the estuarine area, the concentrations of PAHs in the sediments were significantly different between the river mouth and lake side. Changes in total organic carbon (TOC) content and the spatial distribution of PAHs in the sediments were consistent. Sediment pollution assessment explored using the fuzzy evaluation model indicated 75% of slight PAH pollution. Some estuarine sediments (22%) concentrated in the east of Wuli Lake were moderately or heavily polluted. The PAHs may lead to occasional detrimental biological consequences in the area. Diagnostic ratios and principal component analysis-multiple linear regression suggested vehicle emission and natural gas combustion as the primary PAH contributors (81%).

Investigation of Global Trends of Pollutants in Marine Ecosystems around Barrang Caddi Island, Spermonde Archipelago Cluster: An Ecological Approach.

High-quality marine ecosystems are free from global trending pollutants’ (GTP) contaminants. Accuracy and caution are needed during the exploitation of marine resources during marine tourism to prevent future ecological hazards that cause chain effects on aquatic ecosystems and humans. This article identifies exposure to GTP: microplastic (MP); polycyclic aromatic hydrocarbons (PAH); pesticide residue (PR); heavy metal (HM); and medical waste (MW), in marine ecosystems in the marine tourism area (MTA) area and Barrang Caddi Island (BCI) waters. A combination of qualitative and quantitative analysis methods were used with analytical instruments and mathematical formulas. The search results show the average total abundance of MPs in seawater (5.47 units/m3) and fish samples (7.03 units/m3), as well as in the sediment and sponge samples (8.18 units/m3) and (8.32 units/m3). Based on an analysis of the polymer structure, it was identified that the dominant light group was MPs: polyethylene (PE); polypropylene (PP); polystyrene (PS); followed by polyamide-nylon (PA); and polycarbonate (PC). Several PAH pollutants were identified in the samples. In particular, naphthalene (NL) types were the most common pollutants in all of the samples, followed by pyrene (PN), and azulene (AZ). Pb+2 and Cu+2 pollutants around BCI were successfully calculated, showing average concentrations in seawater of 0.164 ± 0.0002 mg/L and 0.293 ± 0.0007 mg/L, respectively, while in fish, the concentrations were 1.811 ± 0.0002 µg/g and 4.372 ± 0.0003 µg/g, respectively. Based on these findings, the BCI area is not recommended as a marine tourism destination.

Polycyclic Aromatic Hydrocarbons: Evaluation of concentrations in environmental media in Bayelsa State

Background and aim Artisanal refining of crude oil is an illegal refining process that contributes to environmental pollution through the release of Polycyclic Aromatic Hydrocarbons (PAHs). PAHs compounds are known for their destructive effects on the environment as well as their harmful effects on human health. This study thus assessed the concentrations of PAHs in water, soil, and fish in communities where artisanal refining of crude oil is practiced in Bayelsa State. Materials and methods This descriptive, comparative study was conducted in Sampou (mildly exposed community), Gbarain, and Nembe (severely exposed communities) in Bayelsa State. Water, fish, and soil samples were collected using pre-existing environmental media collection guidelines and sent to the laboratory for GC-FID determination of the PAH concentrations. The data obtained were analyzed using the Statistical Package for Social Sciences (SPSS) software. Results Mean and (total) PAHs concentration in water samples obtained from Sampou was 3.50 ± 4.51 (59.59) μg/L; Gbarain 1.76 ± 4.35 (29.87) μg/L and Nembe 1.90 ± 4.20 (32.25) μg/L. A significant difference in the concentrations was also identified p-value: of 0.021. The mean concentration of PAHs in soil samples obtained from Sampou was 10.73 ± 15.53 (183.38) μg/kg; Gbarain 12.00 ± 19.57 (204.32) μg/kg and Nembe was 8.49 ± 10.07 (144.48) μg/kg. Finally, the mean concentration in fish samples obtained from Sampou was 5.62 ± 5.92 (95.43) μg/kg; Gbarain 3.81 ± 5.57 (64.75) μg/kg and Nembe 4.61 ± 5.33 (78.35) μg/kg. The difference in these concentrations was however not significant. Source diagnostic ratios of the PAHs in the water included Flt/(Flt + Pyr) ratio of 0.23, 0.16, and 0.21; Ant/(Ant + Phe) ratio of 0.87, 0.76, and 0.87 as well as BaA/(BaA + Chr) ratio of 0.43, 0.51 and 0.66 in Sampou, Gbarain and Nembe respectively. Conclusion Concentrations of total PAHs in water and fish samples obtained from the three communities exceeded the acceptable limits for ƩPAHs of 2.0 μg/L and 2 μg/kg in water and fish respectively stipulated by the United States Environmental Protection Agency and the Nigerian Petroleum Regulatory Authority. ƩPAHs concentrations from the samples obtained from Sampou were also higher than the other two communities. There is a need for regular environmental monitoring of PAH concentrations, especially in oil-producing communities, and a shift of focus toward the elimination of pyrolytic sources of PAH pollution.

Influence of Source Apportionment of PAHs Occurrence in Aquatic Suspended Particulate Matter at a Typical Post-Industrial City: A Case Study of Freiberger Mulde River

Polycyclic aromatic hydrocarbons (PAHs) have received extensive attention because of their widespread presence in various environmental media and their high environmental toxicity. Thus, figuring out the long-term variances of their occurrence and driving force in the environment is helpful for environmental pollution control. This study investigates the concentration levels, spatial variance, and source apportionment of PAHs in suspended particulate matter of Freiberger Mulde river, Germany. Results show that the concentrations of the 16 priority PAHs suggested by USEPA (Σ16PAHs) were in the range of 707.0–17,243.0 μg kg−1 with a mean value of 5258.0 ± 2569.2 μg kg−1 from 2002 to 2016. The relatively high average concentrations of Σ16PAHs were found in the midstream and upstream stations of the given river (7297.5 and 6096.9 μg kg−1 in Halsbrucke and Hilbersdorf, respectively). In addition, the annual average concentration of Σ16PAHs showed an obvious decreasing pattern with time. Positive Matrix Factorization (PMF) receptor model identified three potential sources: coke ovens (7.6–23.0%), vehicle emissions (35.9–47.7%), and coal and wood combustion (34.5–47.3%). The source intensity variation and wavelet coherence analysis indicated that the use of clean energy played a key role in reducing PAHs pollution levels in suspended sediments. The risk assessment of ecosystem and human health suggested that the Σ16PAHs in the given area posed a non-negligible threat to aquatic organisms and humans. The data provided herein could assist the subsequent management of PAHs in the aquatic environment.