Polyethylene Glycol-polycaprolactone Research Articles

Role of in situ added cellulose nanocrystals as rheological modulator of novel waterborne polyurethane urea for 3D-printing technology

Cellulose nanocrystals (CNC) have been studied as rheological modulator in order to improve the printing performance of a novel polycaprolactone-polyethylene glycol (PCL-PEG) waterborne polyurethane urea (WBPUU) based ink for direct ink writing 3D-printing technology. The cellulose nanocrystals are chemically bonded to the WBPU, since they were added during the synthesis of a WBPUU, in order to tune the rheological properties of the ink and thus, improve the printing performances. The WBPUU-CNC inks have been extensively characterized from the rheological viewpoint and have been subsequently used to print different pieces. To determine the capacity of the CNC to improve the printing performance of this type of inks, we establish the relationship between the rheological properties of the inks and their printing viability by an optimal window of compositions of the inks. Additionally, we have measured the mechanical and thermomechanical properties of printed WBPUU-CNC pieces to evaluate the effective reinforcement of in situ incorporated CNC in the WBPUU-CNC inks. The results showed that the addition of CNC accentuates the shear-thinning behaviour, presenting lower tan δ, especially at the lowest CNC contents compared with the matrix, which resulted in inks with excellent printable properties. Moreover, the shape fidelity is increased by the solid-like behavior due to the filler effect of CNC and confirmed by SEM images. Finally, a large increase in Young’s modulus and thermal and thermomechanical stability were observed on the printed pieces that contained only 0.5 wt% CNC compared to the matrix, suggesting the formation of effective interactions between CNC and WBPUU, as corroborated by FTIR, that lead to a greater reinforcement.

Collagenase IV and clusterin-modified polycaprolactone-polyethylene glycol nanoparticles for penetrating dense tumor tissues.

Purpose: Novel collagenase IV (ColIV) and clusterin (CLU)-modified polycaprolactone-polyethylene glycol (PCL-PEG) nanoparticles that load doxorubicin (DOX) were designed and fully evaluated in vitro and in vivo.Methods: PCL-PEG-ColIV was synthesized by linking PCL-PEG and ColIV through a carbodiimide method. DOX-loaded nanoparticles (DOX-PCL-PEG-ColIV) were self-assembly prepared, followed by noncovalently adsorbing CLU on the DOX-PCL-PEG-ColIV surface to obtain DOX-PCL-PEG-ColIV /CLU nanoparticles, which can penetrate through the tumor extracellular matrix (ECM) and inhibit phagocytosis by macrophage. The physicochemical properties of nanoparticles were characterized. The cellular uptake and antiphagocytosis ability of nanoparticles in MCF-7 tumor cells and RAW264.7 cells were investigated. The penetration ability of nanoparticles was individually evaluated in the two-dimensional (2D) and three-dimensional (3D) ECM models. The tissue distribution and antitumor effect of nanoparticles were evaluated in MCF-7 cell-bearing nude mice.Results: Compared with DOX-PCL-PEG-COOH nanoparticles, DOX-PCL-PEG-ColIV/CLU nanoparticles could effectively overcome the phagocytosis by RAW264.7 and showed excellent cellular uptake in MCF-7 cells. In addition, they showed remarkable penetration ability through the 2D and 3D ECM models. DOX-PCL-PEG-ColIV/CLU nanoparticles significantly reduced the drug distribution in the liver and spleen and enhanced the drug accumulation in tumor tissue compared with DOX-PCL-PEG-COOH or DOX-PCL-PEG-ColIV nanoparticles. DOX-PCL-PEG-ColIV/CLU nanoparticles showed remarkable antitumor effect but did not cause severe pathological damages in the main tissues, including the heart, liver, spleen, lung, and kidney.Conclusion: Novel ColIV and CLU-modified PCL-PEG nanoparticles showed excellent cellular uptake, ECM penetration, antiphagocytosis, and antitumor effects both in vitro and in vivo.

Biocompatible perovskite quantum dots with superior water resistance enable long-term monitoring of the H2S level in vivo.

The application of perovskite quantum dots (PQDs) in biomedical fields such as bioimaging and biosensing has been limited owing to their instability in the physiological environment. Herein, PQDs are innovatively encapsulated into nano-micelles composed of a polyethylene glycol-polycaprolactone (PEG-PCL) block copolymer, which allows the preparation of biocompatible PQDs (bio-PQDs) with excellent water resistance. Due to the benefits of extraordinary water resistance and biocompatibility, these bio-PQDs are capable of real-time and long-term quantitatively monitoring the H2S level in living cells as well as in zebrafish.

Combined delivery of salinomycin and docetaxel by dual-targeting gelatinase nanoparticles effectively inhibits cervical cancer cells and cancer stem cells

Intra-tumor heterogeneity is widely accepted as one of the key factors, which hinders cancer patients from achieving full recovery. Especially, cancer stem cells (CSCs) may exhibit self-renewal capacity, which makes it harder for complete elimination of tumor. Therefore, simultaneously inhibiting CSCs and non-CSCs in tumors becomes a promising strategy to obtain sustainable anticancer efficacy. Salinomycin (Sal) was reported to be critical to inhibit CSCs. However, the poor bioavailability and catastrophic side effects brought about limitations to clinical practice. To solve this problem, we previously constructed gelatinase-stimuli nanoparticles composed of nontoxic, biocompatible polyethylene glycol-polycaprolactone (PEG-PCL) copolymer with a gelatinase-cleavable peptide Pro-Val-Gly-Leu-Iso-Gly (PVGLIG) inserted between the two blocks of the copolymer. By applying our “smart” gelatinase-responsive nanoparticles for Sal delivery, we have demonstrated specific accumulation in tumor, anti-CSCs ability and reduced toxicity of Sal-NPs in our previous study. In the present study, we synthesized Sal-Docetaxel-loaded gelatinase-stimuli nanoparticles (Sal-Doc NP) and confirmed single emulsion as the optimal method of producing Sal-Doc NPs (Sal-Doc SE-NP) in comparison with nanoprecipitation. Sal-Doc SE-NPs inhibited both CSCs and non-CSCs in mice transplanted with cervical cancer, and might be associated with enhanced restriction of epithelial-mesenchymal transition (EMT) pathway. Besides, the tumorigenic capacity and growing speed were obviously suppressed in Sal-Doc-SE-NPs-treated group in rechallenge experiment. Our results suggest that Sal-Doc-loaded gelatinase-stimuli nanoparticles could be a promising strategy to enhance antitumor efficacy and reduce side effects by simultaneously suppressing CSCs and non-CSCs.

Amphiphilic Polymer-Modified Uniform CuFeSe2 Nanoparticles for CT/MR Dual-Modal Imaging.

Recently, magnetic photothermal nanomaterials have attracted much attention in the diagnosis and treatment of cancer. In this study, we developed the ultrasmall magnetic CuFeSe2 nanoparticles for CT/MR dual-modal imaging. By controlling the reaction time and condition, CuFeSe2 nanoparticles were synthesized by a simple directly aqueous method. After modification with copolymer methoxy polyethylene glycol-polycaprolactone (MPEG-PCL), the obtained MPEG-PCL@CuFeSe2 nanoparticles showed excellent water solubility, colloidal stability, and biocompatibility. In addition, they also exhibited superparamagnetism and X-ray's characteristics. For these properties, they will become ideal nanomaterials for CT/MR dual-modal imaging.

Functionalized polymeric hybrid micelles as an efficient nanotheranostic agent for thrombus imaging and thrombolysis

Pathological thrombosis within a vessel hampers blood flow and is the mainspring of numerous fatal cardiovascular complications. In order to specifically image and dissolve a thrombus, we rationally designed a functionalized polymeric hybrid micelle (PHM) system self-assembled from amphiphilic polycaprolactone-polyethylenimine (PCL-PEI) and polycaprolactone-polyethylene glycol (PCL-PEG). Based on a biological component of thrombi, activated coagulation factor XIII (FXIIIa), which is responsible for fibrin crosslinking, we further developed FXIIIa-targeted near infrared imaging and thrombolytic nanoparticles, termed IR780/FPHM/LK NPs, through chemical conjugation of peptides to the system. In a ferric chloride (FeCl3)-induced mouse carotid thrombosis model, IR780/FPHM/LK NPs specifically targeted the thrombus and significantly enhanced the photoacoustic signal for an accurate diagnosis. When loaded with the fibrinolytic drug lumbrokinase (LK), FPHM remarkably dissociated the thrombus accompanied by an increase in the d-dimer level, a fibrin degradation product, and alleviation of fatal nonspecific hemorrhagic risk. Given its thrombus-specific imaging along with potent therapeutic activities, IR780/FPHM/LK NPs hold promise for developing nanotheranostic agents in preclinical thrombotic vascular disease models.

Construction of Inflammatory Directed Polymer Micelles and Its Application in Acute Lung Injury.

Currently, there is no specific treatment for acute lung injury (ALI) in clinical practice. In order to efficiently and accurately treat ALI, the advantages of cationic carriers were combined to accelerate the cell uptake. Polycaprolactone-polyethylene glycol carrier (PCL-PEG-COOH, PPC) with good biocompatibility, polycaprolactone-polyethylmethacrylate cationic carrier (PCL-PDMAEMA, PCD), and polycaprolactone-polyethylene glycol carrier connected with high-affinity targeting peptide (Esbp) targeting inflammatory endothelial cells (PCL-PEG-Esbp, PPE) were used to construct the high-molecular polymer micelles (PCD/PPC/PPE). The particle size of the prepared DEX-loaded micelles was 130 ± 4.41nm, and the Zeta potential was 28.3 ± 0.76mV. The CMC value of the prepared polymer micelles was 0.643μg/mL, and it was not easy to depolymerize in the blood circulation. Only about 40% DXM was released from the drug-loaded polymer micelles after 12h compared with free DXM, indicating that the micelle material had a certain sustained-release performance in vitro release experiments. The safe concentration range of polymer was determined by biocompatibility test. It was recommended that the concentration of polymer micelles should not exceed 0.40mg/mL to obtain a good compatibility in organisms. The results of cytotoxicity measurement showed that when the content of PCD increased to 50%, the concentration of blank micelles should not exceed 500μg/mL and the concentration of DXM-loaded micelles should not be higher than 100μg/mL. It was proved in the cell uptake experiment that the cation carrier of the micelles accelerated the cell uptake. The targeting ability of the targeted micelle group was higher compared with the non-targeted micelle group (P< 0.01, **). Meanwhile, the targeting ability of the non-targeted micelle group was higher compared with the free group (P< 0.001, ***). The targeting ability of the non-targeted micelle group was about 2.30 times and the targeted micelle group was about 3.16 times larger than that of the free group. It was also proved in the in vivo targeting experiments that the targeted micelles had a good targeting ability. The results of in vivo imaging of mice showed that the DXM of the micelle group gathered more in the lungs, and the micelle group had a better targeting ability compared with the free DID group. The order of lung targeting intensity was targeted micelles > non-targeted micelles >> free DID group. The targeting ability of polypeptide Esbp to ALI was confirmed. In conclusion, the prepared PCD/PPC/PPE polymer micelles had obvious in vitro and in vivo targeting ability and good biocompatibility. They could be used as a new targeted delivery system for the treatment of ALI in the future.

Inhibition of Multiple Myeloma Using 5-Aza-2'-Deoxycytidine and Bortezomib-Loaded Self-Assembling Nanoparticles.

PurposeThe aim of this study was to explore the use of self-assembling nanoparticles loaded with two chemotherapy drugs for the treatment of multiple myeloma.Materials and MethodsNanoparticle systems were developed based on amine polyethylene glycol-polycaprolactone (NH2-PEG-PCL) to encapsulate 5-Aza-2ʹ-deoxycytidine and Bortezomib using the self-assemble method. Morphological changes were observed by transmission electron microscopy (TEM), and the size, drug release, long-term stability, and release of reactive oxygen species (ROS) were analyzed. The MTT assay was used to evaluate the effects of drug-loaded nanoparticles (PEG-PCL-DAC-BTZ) in inhibiting the proliferation of multiple myeloma cells (U266 and LP-1), and the TUNEL assay and Western blotting were used to measure the induction of cell apoptosis.ResultsBased on the diameter of NH2-PEG-PCL and PEG-PCL-DAC-BTZ, the drug-loaded nanoparticles were successfully prepared. TEM revealed that PEG-PCL-DAC-BTZ was spherically shaped. More than 90% of the drugs were released after 72 h, and PEG-PCL-DAC-BTZ maintained a good stability. U266 and LP-1 cells treated with PEG-PCL-DAC-BTZ showed the highest growth inhibition, release of ROS, and cell apoptosis compared to those treated with unloaded nanoparticles and chemotherapy drugs alone.ConclusionThe drug-loaded nanoparticles are a good foundation for the treatment of multiple myeloma as they showed a slow release profile, good stability, and superior anti-cancer effects in vitro.

Development of besifloxacin HCl loaded nanofibrous ocular inserts for the treatment of bacterial keratitis: In vitro, ex vivo and in vivo evaluation.

Novel drug delivery systems have emerged to treat bacterial keratitis, an acute infection of the cornea. In this study, besifloxacin HCl loaded insert formulations were designed and investigated in vitro, ex vivo and in vivo for the treatment of bacterial keratitis. Besifloxacin HCl (BH) or BH-hydroxypropyl-beta-cyclodextrin (HP-β-CD) complex containing poly(caprolactone)/polyethylene glycol (PLC/PEG) fibrous inserts were prepared with an electrospinning method. These fibrous inserts were coated with mucoadhesive polymers such as sodium alginate (SA) or thiolated sodium alginate (TSA). Developed inserts compared to commercially available drug and it was found that coating of the insert surfaces with SA and TSA, increases bioadhesion of the formulations. Insert formulations showed a burst release in the first 2days followed by a slow-release profile. Ex vivo transport studies showed that HP-β-CD possessed a drug delivery level close to the commercial drug. Both TSA coated inserts as well as inserts containing HP-β-CD-drug complex were effectively reducing bacterial keratitis in rabbit eyes upon single-dose application compared to multiple dosing with the commercial drug. Consequently, TSA coated inserts as well as the inserts containing HP-β-CD-drug complex, may be potential alternatives to conventional market product by reducing the application frequency in the clinic leading to increased patient compliance.

Multi-nanolayer drug delivery using radiofrequency plasma technology

BackgroundIt may be impossible to perform cancer surgery with free margins in the presence of an unresectable structure. Local drug treatment after surgery has been proposed to increase the rate of tumor control.MethodsMulti-nanolayers (10-330 nm) were generated by a low-pressure (375mTorr) inductively coupled plasma (13.56 MHz) reactor for anticancer drug delivery by the deposition of polycaprolactone-polyethylene glycol multistack barrier on the collagen membrane (100 μm thickness). Carboplatin (300 μg/cm2) was used for the in vitro and in vivo investigations. Energy-dispersive X-ray spectroscopy (15 keV), scanning electron microscopy and inductively coupled plasma mass spectrometry were used to detect the presence of carboplatin in the nanolayer, the tumor sample and the culture medium. Preclinical studies were performed on ovarian (OVCAR-3NIH) and colon (CT26) cancer cell lines as xenografts (45 days) and allografts (23 days) in Swiss-nude (n = 6) and immunocompetent BALB/cByJ mice (n = 24), respectively.ResultsThe loading of carboplatin or other drugs between the nanofilm on the collagen membrane did not modify the mesh complex architecture or the drug properties. Drugs were detectable on the membrane for more than 2 weeks in the in vitro analysis and more than 10 days in the in vivo analysis. Cytotoxic mesh decreased cell adherence (down 5.42-fold) and induced cancer cell destruction (up to 7.87-fold). Implantation of the mesh on the mouse tumor nodule modified the cell architecture and decreased the tumor size (50.26%) compared to the control by inducing cell apoptosis.ConclusionPlasma technology allows a mesh to be built with multi-nanolayer anticancer drug delivery on collagen membranes.

Optimization of Process Parameters using Response Surface Methodology for PCL based Biodegradable Composite Membrane for Water Purification

The biodegradability of polycaprolactone (PCL) and the anti-fouling property of TiO2 are utilized for the preparation of membranes for water treatment. Polyethylene glycol (PEG) is added to the polymeric solution to increase the pore formation in the membranes. The composition of PEG and TiO2 nanoparticles was optimized using the central composite design and response surface methodology. Quadratic models were developed for the responses porosity and contact angle, and the optimum compositions obtained for PEG and TiO2 were 6.24 and 1 wt%, respectively. The competency of the membrane for water treatment is studied using different characterization techniques such as TG analysis, FTIR to determine the chemical interactions, UTM to examine the mechanical strength, AFM for membrane roughness determination and morphological analysis using FESEM. A twofold increase in the overall porosity and a twentyfold reduction (approx.) in pore size were observed for the composite membrane from FESEM images. The anti-fouling ability of TiO2 resulted in a flux recovery of about 90% for the composite membrane compared to the PCL–PEG membrane after bovine serum albumin filtration. Also, the presence of TiO2 increased the reversible fouling component, which can be easily removed by cleaning/backwashing. Thus, the PCL–TiO2 combination would be a better alternative for the membranes used in water treatment applications.

Long-Term Evaluation of Dip-Coated PCL-Blend-PEG Coatings in Simulated Conditions.

Our study focused on the long-term degradation under simulated conditions of coatings based on different compositions of polycaprolactone-polyethylene glycol blends (PCL-blend-PEG), fabricated for titanium implants by a dip-coating technique. The degradation behavior of polymeric coatings was evaluated by polymer mass loss measurements of the PCL-blend-PEG during immersion in SBF up to 16 weeks and correlated with those yielded from electrochemical experiments. The results are thoroughly supported by extensive compositional and surface analyses (FTIR, GIXRD, SEM, and wettability investigations). We found that the degradation behavior of PCL-blend-PEG coatings is governed by the properties of the main polymer constituents: the PEG solubilizes fast, immediately after the immersion, while the PCL degrades slowly over the whole period of time. Furthermore, the results evidence that the alteration of blend coatings is strongly enhanced by the increase in PEG content. The biological assessment unveiled the beneficial influence of PCL-blend-PEG coatings for the adhesion and spreading of both human-derived mesenchymal stem cells and endothelial cells.

PLA–PCL–PEG–PCL–PLA based micelles for improving the ocular permeability of dexamethasone: development, characterization, and in vitro evaluation

The aim of the present research was to investigate the feasibility of developing polylactide–polycaprolactone–polyethylene glycol–polycaprolactone–polylactide (PLA–PCL–PEG–PCL–PLA) based micelles to improve ocular permeability of dexamethasone (DEX). PLA–PCL–PEG–PCL–PLA copolymers were synthesized by a ring-opening polymerization method. DEX was loaded into the developed copolymers. The DEX-loaded micelles were characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS) methods. Cytotoxicity of the micelles obtained was investigated on L929 cell line. Cellular uptake was followed by fluorescence microscopy and flow cytometry analyses. The release behavior of DEX from the micelles as well as the drug release kinetics was studied. Corneal permeability was also evaluated using an ex vivo bovine model. The pentablock copolymers were successfully synthesized. The TEM results verified the formation of spherical micelles, the sizes of which was approximately 65 nm. The micelles exhibited suitable compatibility on L929 cells. The release profile showed an initial burst release phase followed by a sustained release phase, the kinetic of which was close to the Weibull’s distribution model. The micelles showed higher corneal permeability in comparison to a marketed DEX eye drop. Taken together, the results indicated that the PLA–PCL–PEG–PCL–PLA micelles could be appropriate candidates for the ocular delivery of DEX, and probably other hydrophobic drugs.

New, Environment Friendly Approach for Synthesis of Amphiphilic PCL–PEG–PCL Triblock Copolymer: An Efficient Carrier for Fabrication of Nanomicelles

Ring opening copolymerization is the most frequently applied reaction for the synthesis of polycaprolactone–polyethylene glycol–polycaprolactone (PCL–PEG–PCL). In this reaction, a number of expensive and toxic organic solvents are being used for the purpose of purification and extraction of the prepared copolymer. Exposure to these organic solvents can cause serious issues to the human health and also impart serious environmental pollution. In the current work, a new, economical and organic solvent free approach was used for the synthesis of triblock copolymer. The results of the current studies confirmed the successful formation of triblock copolymer as revealed by Fourier transform infrared spectra, 13carbon nuclear magnetic resonance (13C-NMR) and proton nuclear magnetic resonance (1H-NMR). Gel permeation chromatography analysis ensured the homo-distribution of the prepared copolymer. The prepared copolymer was further evaluated as a carrier for the drug loading. Nanomicelles were successfully prepared by the nanoprecipitation technique and exhibited an average size distribution of 42.50 nm and an encapsulation efficiency of 90%. The prepared nanomicelles also exhibited safety at the concentration of 50 µg/ml and a long-term storage stability. All these studies suggested the success of the new simplest and economical method for the synthesis of PCL–PEG–PCL and its subsequent applications as a carrier for fabrication and efficient delivery of hydrophobic drug molecules.

Anti-Metastatic Effects on Melanoma via Intravenous Administration of Anti-NF-κB siRNA Complexed with Functional Peptide-Modified Nano-Micelles.

Controlling metastasis is an important strategy in cancer treatment. Nanotechnology and nucleic acids with novel modalities are promising regulators of cancer metastasis. We aimed to develop a small interfering RNA (siRNA) systemic delivery and anti-metastasis system using nanotechnology. We previously reported that polyethylene glycol-polycaprolactone (PEG-PCL) and functional peptide CH2R4H2C nano-micelle (MPEG-PCL-CH2R4H2C) has high siRNA silencing effects, indicated by increased drug accumulation in tumor-bearing mice, and has an anti-tumor effect on solid tumors upon systemic injection. In this study, we aimed to apply our micelles to inhibit metastasis and evaluated the inhibitory effect of anti-RelA siRNA (siRelA), which is a subunit of NF-κB conjugated with MPEG-PCL-CH2R4H2C, via systemic administration. We report that siRelA/MPEG-PCL-CH2R4H2C had a high cellular uptake and suppressed the migration/invasion of cells in B16F10 cells without toxicity. In addition, in a lung metastasis mouse model using intravenous administration of B16F10 cells treated with siRelA/MPEG-PCL-CH2R4H2C, the number of lung nodules in lung tissue significantly decreased compared to naked siRelA and siControl/MPEG-PCL-CH2R4H2C micelle treatments. Hence, we show that RelA expression can reduce cancer metastasis, and MPEG-PCL-CH2R4H2C is an effective siRNA carrier for anti-metastasis cancer therapies.

Prominent Enhancement of Cisplatin Efficacy with Optimized Methoxy Poly(ethylene glycol)-Polycaprolactone Block Copolymeric Nanoparticles.

Chemotherapy has been one of the major standard treatments for a variety of cancers. cis-Dichlorodiamminoplatiunum (II) (cisplatin, CDDP), as one of the anticancer agents, demonstrated excellent efficacy against tumor and has been an indispensable component in chemotherapy, chemoradiation, chemo-molecular targeted therapy and chemo-immunotherapy. However, its therapeutic concentration was limited since its inevitable toxicity. Previously, we have constructed CDDPloaded nanoparticles (NPs) with mixture of poly(ethyleneglycol)-polycaprolactone (PEG-PCL) and polycarprolactone (HOPCL) by a facile method. The most optimal proportion of the two copolymers was selected through a series of physical, chemical, cytological and histological evaluations. In the present study, we explored the mechanisms of NPs and observed the in vivo antitumor effect after administrating CDDP-loaded PEG-PCL NPs. Positron emission tomography as well as computed tomography (PET/CT) were adopted for detecting tumoral metabolic activity. Images from fluorescence microscope revealed superior cellular uptake of CDDP-loaded NPs with rhodamine B aggregated intracellularly in cancer cells. Similar apoptotic rates between free CDDP group and CDDP-loaded NPs group was measured by flow cytometry. Tumor volumes and murine weights confirmed the superiority of CDDP-loaded NPs in therapeutic efficacy as compared with free CDDP. Blood tests showed milder side effects in CDDP-loaded nanoparticle group. PET/CT images illustrated less uptake intensity of FDG in mice received CDDP-loaded NPs than free CDDP. Our results suggest that PEG-PCL/PCL NPs could be a promising antitumor drug carrier for CDDP delivery with solid efficacy and minor side effects.

Injectable hydrogels based on MPEG-PCL-RGD and BMSCs for bone tissue engineering.

The aim of this study was to investigate the osteogenic potential of bone marrow-derived mesenchymal stem cells (BMSCs) seeded on novel thermosensitive in situ forming hydrogel systems comprising methoxy polyethylene glycol-polycaprolactone (MP) and RGD-conjugated MP (MP-RGD) in vitro and in vivo. Real-time polymerase chain reaction (PCR) together with immunofluorescence staining revealed the strong expression of osteogenic markers (collagen 1 and osteocalcin) of BMSCs in MP/MP-RGD samples compared to MP samples. PCR array testing also showed the upregulation of the interconnected signaling networks regulating cell proliferation and differentiation, which was further verified through the Kyoto Encyclopedia of Genes and Genomes pathway analysis. Histological findings and computed tomographic analysis demonstrated that the MP/MP-RGD hydrogel dramatically promoted new bone formation in a rabbit calvarial defect model. In conclusion, this hydrogel appears to elicit cellular behaviors desired for bone tissue regeneration.

IRGD-guided tamoxifen polymersomes inhibit estrogen receptor transcriptional activity and decrease the number of breast cancer cells with self-renewing capacity

BackgroundTamoxifen (Tam) is the most frequent treatment for estrogen receptor (ER) positive breast cancer. We recently showed that fibronectin (FN) leads to Tam resistance and selection of breast cancer stem cells. With the aim of developing a nanoformulation that would simultaneously tackle ER and FN/β1 integrin interactions, we designed polyethylene glycol-polycaprolactone polymersomes polymersomes (PS) that carry Tam and are functionalized with the tumor-penetrating iRGD peptide (iRGD-PS-Tam).ResultsPolyethylene glycol-polycaprolactone PS were assembled and loaded with Tam using the hydration film method. The loading of encapsulated Tam, measured by UPLC, was 2.4 ± 0.5 mol Tam/mol polymer. Physicochemical characterization of the PS demonstrated that iRGD functionalization had no effect on morphology, and a minimal effect on the PS size and polydispersity (176 nm and Pdi 0.37 for iRGD-TAM-PS and 171 nm and Pdi 0.36 for TAM-PS). iRGD-PS-Tam were taken up by ER+ breast carcinoma cells in 2D-culture and exhibited increased penetration of 3D-spheroids. Treatment with iRGD-PS-Tam inhibited proliferation and sensitized cells cultured on FN to Tam. Mechanistically, treatment with iRGD-PS-Tam resulted in inhibition ER transcriptional activity as evaluated by a luciferase reporter assay. iRGD-PS-Tam reduced the number of cells with self-renewing capacity, a characteristic of breast cancer stem cells. In vivo, systemic iRGD-PS-Tam showed selective accumulation at the tumor site.ConclusionsOur study suggests iRGD-guided delivery of PS-Tam as a potential novel therapeutic strategy for the management of breast tumors that express high levels of FN. Future studies in pre-clinical in vivo models are warranted.

Antisense LNA-loaded nanoparticles of star-shaped glucose-core PCL-PEG copolymer for enhanced inhibition of oncomiR-214 and nucleolin-mediated therapy of cisplatin-resistant ovarian cancer cells.

We aimed to inhibit overexpressed oncomiR-214 in cisplatin (CIS)-resistant ovarian cancer (OC) and perform targeted therapy of sensitized cells using a novel polymeric drug delivery system (DDS). A system of nanoparticles (NPs) of star-shaped glucose-core polycaprolactone-polyethylene glycol (Glu-PCL-PEG) block copolymer containing cisplatin (CIS-PCL NPs) and locked nucleic acid (LNA) anti-miR-214 (LNA-PCL NPs) were prepared and anti-nucleolin aptamer was conjugated to the surface of prepared NPs to prepare Ap-CIS-PCL NPs and Ap-LNA-PCL NPs, respectively. The cancer-targeting ability of the NPs was confirmed and the CIS-resistant A2780 (A2780 R) cells were transfected with Ap-LNA-PCL NPs to inhibit oncomiR-214 and sensitize the cells to CIS. Next, the miR-214-inhibited cells were exposed to the Ap-CIS-NPs and the deracination efficiency of targeted DDS was evaluated. The oncomiR-214 in A2780 R cells were harnessed by Ap-LNA-PCL NPs, and nucleolin-mediated endocytosis of targeted polymeric DDSs containing CIS into miR-214-inhibited A2780 R cells caused enhanced apoptosis, which was further confirmed by apoptosis detection and evaluation of downstream genes expression. Targeted inhibition of miR-214 using the developed NPs containing LNA can decrease drug-resistant properties of cancer cells and may enhance the efficiency of targeted DDSs.

Enzymatic Polymerization of PCL-PEG Co-polymers for Biomedical Applications.

Biodegradable polymers, obtained via chemical synthesis, are currently employed in a wide range of biomedical applications. However, enzymatic polymerization is an attractive alternative because it is more sustainable and safer. Many lipases can be employed in ring-opening polymerization (ROP) of biodegradable polymers. Nevertheless, the harsh conditions required in industrial context are not always compatible with their enzymatic activity. In this work, we have studied a thermophilic carboxylesterase and the commonly used Lipase B from Candida antarctica (CaLB) for tailored synthesis of amphiphilic polyesters for biomedical applications. We have conducted Molecular Dynamics (MD) and Quantum Mechanics/Molecular Mechanics (QM/MM) MD simulations of the synthesis of Polycaprolactone—Polyethylene Glycol (PCL—PEG) model co-polymers. Our insights about the reaction mechanisms are important for the design of customized enzymes capable to synthesize different polyesters for biomedical applications.