Polarization Control Research Articles

Scattering Elimination in 2D IR Immune from Detector Artifacts.

Highly scattering samples, such as polymer droplets or solid-state powders, are difficult to study via coherent two-dimensional infrared (2D IR) spectroscopy. Previously, researchers have employed (quasi-) phase cycling, local-oscillator chopping, and polarization control to reduce scattering, but the latter method poses a limit on polarization-dependent measurements. Here, we present a method for Scattering Elimination Immune from Detector Artifacts (SEIFDA) in pump-probe 2D IR experiments. Our method extends the negative probe delay method of removing scattering from pump-probe spectroscopy to 2D experiments. SEIFDA works well for all polarizations when combined with the optimized noise reduction scheme to remove additive and multiplicative noise. We demonstrate that our method can be employed with any polarization scheme and reliably lowers the scattering at parallel polarization to comparable levels to the conventional 8-frame phase cycling with probe chopping (8FPCPC) at perpendicular polarization. Our system can acquire artifact free spectra in parallel polarization when the signal intensity is as little as 5% of the intensity of the interference between the pump pulses scattered into the detector. It reduces the time required to characterize the scattering term by at least 50% over 8FPCPC. Through detailed analysis of detector nonlinearity, we show that the performance of 8FPCPC can be improved by incorporating nonlinear correction factors, but it is still worse than that of SEIFDA. Application of SEIFDA to study the encapsulation of Nile red in polymer droplets demonstrates that this method will be very useful for probing highly scattering systems.

Logic Computing Field-Effect Transistors Based on a Monolayer WSe2 Homojunction for the Semi-adder and Decoder.

Two-dimensional reconfigurable field-effect transistors (FETs) are promising candidates for next-generation computing hardware. However, exploring the cascade design of FETs for logic computing remains challenging. Here, by using density functional theory combined with the nonequilibrium Green's function method, we design a 5 nm split-gate FET based on a monolayer WSe2 homojunction, which can implement dynamic polarity control in different gate configurations. The series array of two FETs shows a functional family of logic gates (NOR, AND, XOR, A̅B, and AB̅), and the semi-adder designed by the logic functions AND and XOR reduces the number of transistors by 66.7%. The parallel array of two FETs demonstrates reconfigurable logic gates with NAND/OR/A̅+B/A+B̅ quadruple functions, which can realize the decoding function of 00-11 in the decoder. The cascade design of the electrically tunable FETs helps to tackle the logic device downscaling and integration dilemmas.

Deep neural network-enabled multifunctional switchable terahertz metamaterial devices

Under the support of deep neural networks (DNN), a multifunctional switchable terahertz metamaterial (THz MMs) device is designed and optimized. This device not only achieves ideal ultra-wideband (UWB) absorption in the THz frequency range but enables dual-functional polarization transformation over UWB. When vanadium dioxide (VO2) is in the metallic state, the device as a UWB absorber with an absorption rate exceeding 90% in the 2.43–10 THz range, with a relative bandwidth (RBW) of 145.2%, and its wideband absorption performance is insensitive to polarization. When VO2 is in the insulating state, the device can switch to a polarization converter, achieving conversions from linear to cross polarization and from linear to circular polarization in the ranges of 4.58–10 THz and 4.16–4.43 THz, respectively. Within the 4.58–10 THz range, the polarization conversion ratio approaches 100% with an RBW of 74.3%, the polarization rotation angle is near 90°. Within the 4.16–4.43 THz range, the RBW is 6.29% and the ellipticity ratio approaches 1, Moreover, the effects of incident angle and polarization angle on the operational characteristics are studied. This THz MMs due to its advantages of wide angle, broad bandwidth, and high efficiency, provides valuable references for the research of new multifunctional THz devices. It has great application potential in short-range wireless THz communication, ultrafast optical switches, high-temperature resistant switches, transient spectroscopy, and optical polarization control devices.

Enhanced intrinsic chiroptical response of resonant metallic metasurfaces.

The physics of resonant metasurfaces underpins many electromagnetic functionalities with enhanced performance by virtue of resonant excitations. Resonances originating from bound states in the continuum (BICs) were recently recognized in photonics for their superior optical properties, strong local field enhancement, and suppression of radiative losses. Very recently, a concept of intrinsically chiral dielectric BIC metasurfaces was proposed that combines strong narrowband resonant features with the polarization control of scattered light. Here, we design a resonant chiral metallic metasurface supporting a BIC resonance in the microwave wavelength range. In our structure, the metasurface units (meta-atoms) are characterized with rotational and mirror spatial symmetries. We numerically characterize metasurface mode properties in eigenmode calculations and scattering spectra for linearly polarized excitation under oblique incidence. Then, we investigate intrinsic chiroptical effects for transmission of normally propagating excitation beams by breaking the meta-atom in-plane mirror symmetries. We predict that the intrinsic circular dichroism in such structures may exceed 0.74.

Local control of polarization and geometric phase in thermal metasurfaces.

Thermal emission from a hot body is inherently challenging to control due to its incoherent nature. Recent advances have shown that patterned surfaces can transform thermal emission into partially coherent beams with tailored directionality and frequency selectivity. Here we experimentally demonstrate polarization-selective, unidirectional and narrowband thermal emission using single-layer metasurfaces. By implementing polarization gradients across the surface, we unveil a generalization of the photonic Rashba effect from circular polarizations to any pair of orthogonal polarizations and apply it to thermal emission. Leveraging pointwise specification of arbitrary elliptical polarization, we implement a thermal geometric phase and leverage it to prove previous theoretical predictions that asymmetric chiral emission is possible without violating reciprocity. This general platform can be extended to other frequency regimes in efforts to compactify metasurface optics technologies without the need for external coherent sources.

Overcoming polarization and dissolution of manganese-based electrodes to enhance stability in electrochemical lithium extraction

The Mn dissolution issue in manganese-based materials (LMO) represents one of the most challenging barriers to further commercial development of electrochemical lithium extraction, which is an efficient and clean way of extracting Li from liquid resources. Here, by leveraging the advantages of composite materials, a novel combination of reduced graphene oxide (rGO) and sulfonated ionic polymers (Nafion) is introduced to relieve the issues of electrode polarization and manganese dissolution, critical factors limiting the durability of LMO electrodes. By modifying with rGO to enhance electronic conductivity and surface characteristics, and capturing dissolved Mn2+ through Nafion, the modified electrode showed significant improvement in cycling stability and lithium adsorption capacity. Experimental results confirm that this synergistic approach effectively mitigates polarization effects and controls disproportionation reactions, thereby enhancing the stability of the lithium extraction process, revealing a notable increase in electrode capacity retention from 79.04 % to 94.64 % after 30 cycles. Additionally, through DFT calculations and XPS analysis, the effectiveness of the manganese capture strategy is validated. This work presents an effective new strategy to extend the lifespan of manganese-based electrodes and enhance their adsorption performance.

Cascaded partitioned phase modulation for cross-connection of orbital angular momentum mode and polarization multiplexing channels.

Multi-dimensional orbital angular momentum (OAM) mode multiplexing provides a promising route for enlarging communication capacity and establishing comprehensive networks. While multi-dimensional multiplexing has gained advancements, the cross-connection of these multiplexed channels, especially involving modes and polarizations, remains challenging due to the needs for multi-mode interconversion and on-demand polarization control. Herein, we propose an OAM mode-polarization cross-transformation solution via cascaded partitioned phase modulation, which enables the divergently separated OAM modes to be independently phase-imposed within distinct spatial regions, leading to the synergistic conversion operation of mode and polarization channels. In demonstrations, we implemented the cross-connection of three OAM modes and two polarization multiplexed channels, achieving the mode purity that exceeds 0.951 and polarization contrast up to 0.947. The measured mode insertion losses and polarization conversion losses are below 3.42 and 3.54 dB, respectively. Consequently, 1.2 Tbit/s quadrature phase shift keying signals were successfully exchanged, yielding the bit-error-rates close to 10-6. Incorporating with increased partitioned phase treatments, this approach shows promise in accommodating massive mode-polarization multiplexed channels, which hold the potential to augment networking capability of large-scale OAM mode multiplexing communication networks.

Supercontinuum generation by nonlinear polarization rotation mode-locked fiber laser with pulse type switchable

We report on the generation of a supercontinuum (SC) by nonlinear polarization-rotating (NPR) mode-locked fiber laser, which includes a pulsed switchable NPR mode-locked fiber laser, an Er-doped fiber amplifier, and high nonlinear fiber (HNLF). In the experiment, by adjusting the polarization controller (PC) angle and pump power, we obtained three different pulses. They are traditional soliton bunch pulses, the coexistence of soliton bunch pulses and square pulses, and multi-longitudinal mode noise like square pulses. All three pulses can generate SC with spectrum width be about of 1000 nm. We fixed the pump power in the laser and observed the influence of amplifier power on the spectrum width and output power of SC. The SC width of soliton bunch pulse reaches 950.9 nm, the SC of soliton bunch pulse and square pulse coexisting pulse is 1009.7 nm, and the SC spectrum width of multi-longitudinal mode noise like square pulse is 887.1 nm. Our results demonstrate the generation of SC with three types of switchable pulses, opening up possibilities for various application requirements.

Distributed Vibration Sensing Based on a Forward Transmission Polarization-Generated Carrier.

For distributed fiber-optic sensors, slowly varying vibration signals down to 5 mHz are difficult to measure due to low signal-to-noise ratios. We propose and demonstrate a forward transmission-based distributed sensing system, combined with a polarization-generated carrier for detection bandwidth reduction, and cross-correlation for vibration positioning. By applying a higher-frequency carrier signal using a fast polarization controller, the initial phase of the known carrier frequency is monitored and analyzed to demodulate the vibration signal. Only the polarization carrier needs to be analyzed, not the arbitrary-frequency signal, which can lead to hardware issues (reduced detection bandwidth and less noise). The difference in arrival time between the two detection ends obtained through cross-correlation can determine the vibration position. Our experimental results demonstrate a sensitivity of 0.63 mrad/με and a limit of detection (LoD) of 355.6 pε/Hz1/2 at 60 Hz. A lock-in amplifier can be used on the fixed carrier to achieve a minimal LoD. The sensing distance can reach 131.5 km and the positioning accuracy is 725 m (root-mean-square error) while the spatial resolution is 105 m. The tested vibration frequency range is between 0.005 Hz and 160 Hz. A low frequency of 5 mHz for forward transmission-based distributed sensing is highly attractive for seismic monitoring applications.

Directional Phase and Polarization Manipulation Using Janus Metasurfaces.

Janus metasurfaces, exemplifying two-faced 2D metamaterials, have shown unprecedented capabilities in asymmetrically manipulating the wavefront of electromagnetic waves in both forward and backward propagating directions, enabling novel applications in asymmetric information processing, security, and signal multiplexing. However, current Janus metasurfaces only allow for directional phase manipulation, hindering their broader application potential. Here, the study proposes a versatile Janus metasurface platform that can directionally control the phase and polarization of terahertz waves by integrating functionalities of half-wave plates, quarter-wave plates, and metallic gratings within a cascaded metasurface structure. As a proof-of-principle, the study experimentally demonstrates Janus metasurfaces capable of independent and simultaneous control over phase and polarization, showcasing propagation direction-encoded focusing and polarization conversion. Moreover, the directionally focused points are utilized with distinct polarization states for advanced applications in direction- and polarization-sensitive detection and imaging. This unique strategy for simultaneous phase and polarization control with direction-dependent versatility opens new avenues for designing ultra-compact devices with significant implications in imaging, encryption, and data storage.

Demonstration of full polarization control of soft X-ray pulses with Apple X undulators at SwissFEL using recoil ion momentum spectroscopy.

The ability to freely control the polarization of X-rays enables measurement techniques relying on circular or linear dichroism, which have become indispensable tools for characterizing the properties of chiral molecules or magnetic structures. Therefore, the demand for polarization control in X-ray free-electron lasers is increasing to enable polarization-sensitive dynamical studies on ultrafast time scales. The soft X-ray branch Athos of SwissFEL was designed with the aim of providing freely adjustable and arbitrary polarization by building its undulator solely from modules of the novel Apple X type. In this paper, the magnetic model of the linear inclined and circular Apple X polarization schemes are studied. The polarization is characterized by measuring the angular electron emission distributions of helium for various polarizations using cold target recoil ion momentum spectroscopy. The generation of fully linear polarized light of arbitrary angle, as well as elliptical polarizations of varying degree, are demonstrated.

(Invited) Chiral Metamaterials for Polarized Photoluminescence

Metasurfaces offer compact routes to spatial and polarization control of luminescence from nearby emitters, enabling applications ranging from document security to stereoscopic displays to sensing.Most of the time, light-emitters are distributed evenly across the surface. This talk will discuss an alternate approach, where we use direct-write electron beam lithography to pattern semiconductor nanocrystals into targeted shapes and locations, creating a highly tailored metasurface. We use a combination of nanoscale fabrication, Fourier-space photoluminescence measurements, and computational methods to study the circularly polarized photoluminescence from these designer structures.We will discuss the influence of patterning on the resulting optical properties, including the effects of spatial averaging and dipole orientation. We will then show an optimization strategy to produce highly polarized light at chosen angles of outcoupling. The final part of the talk will discuss adding layers of complexity, including the chirality of the underlying pattern, and creating light-emitting solids from intrinsically chiral semiconductor nanocrystals.

Quantifying Structural Polarization by Continuous Regulation of Lone-Pair Electron Expression in Molecular Crystals.

Rational design of structural polarization is vital for modern technologies, as it allows the physical properties of functional materials to be tailored. An effective approach for governing polarization involves the utilization of stereochemical lone-pair electrons (LPEs). However, despite the recognized significance of LPEs in controlling structural polarization, there remains a lack of understanding regarding the quantitative relationship between their expression and the extent of structural polarization. Here, by using pressure to continuously tune the LPE expression, we achieve the precise control and quantification of structural polarization, which brings enhanced second harmonic generation (SHG) of the molecular crystal SbI3·3S8. We introduce the I-Sb-I angle (α̅) that describes the degree of LPE expression and establishes a quantitative relationship between α̅ and structural polarization. That is, decreasing α̅ shapes LPE expression from delocalization to localization, which repels the bonding pairs of electrons and thus enhances the structural polarization. In addition, we extend this quantified relationship to a series of molecular crystals and demonstrate its applicability to the design of structural polarization by tailoring LPE expression.

New millimeter-wave diagnostics to locally probe internal density and magnetic field fluctuations in National Spherical Torus Experiment-Upgrade (invited).

A set of new millimeter-wave diagnostics will deliver unique measurement capabilities for National Spherical Torus Experiment-Upgrade to address a variety of plasma instabilities believed to be important in determining thermal and particle transport, such as micro-tearing, global Alfvén eigenmodes, kinetic ballooning, trapped electron, and electron temperature gradient modes. These diagnostics include a new integrated intermediate-k Doppler backscattering (DBS) and cross-polarization scattering (CPS) system (four channels, 82.5-87GHz) to measure density and magnetic fluctuations, respectively. The system can access reasonably large normalized wavenumbers kθρs ranging from ≤0.5 to 15 (where ion sound gyroradius ρs = 1cm and kθ is the binormal density turbulence wavenumber). The system addresses the challenges for making useful DBS/CPS measurements with a remote control of launch polarization (X- or O-mode), probed wavenumber, polarization match of the launch beam with the edge magnetic field pitch angle, and beam steering of the launched beam for wave-vector alignment. In addition, a low-k DBS system consisting of eight fixed frequencies (34-52GHz) and four tunable frequencies (55-75GHz) for low-k density turbulence and fast ion physics will be located at a nearby port location. The combined systems cover the near LCFS and pedestal regions (34-52GHz), the pedestal or mid-radius (50-75GHz), and core plasmas (82.5-87GHz).

Coherent polarization control of terahertz emission from graphene under excitation of two-color co-circularly polarized laser fields.

Coherent polarization control of terahertz (THz) emission is crucial for applications in the THz field. Here, we demonstrate that the polarization of THz waves emitted from graphene through quantum interference can be coherently controlled by varying the relative phase between the co-circularly polarized laser fields. The polarization state of the THz wave emitted from graphene remains linearly polarized, while its direction can be arbitrarily changed by varying the relative phase. This work not only achieves the coherent polarization control of the THz waves emitted from graphene but also promotes the fundamental research of THz photonics in graphene.

Manipulating Ferroelectric Polarization and Spin Polarization of 2D CuInP2S6 Crystals for Photocatalytic CO2 Reduction.

Manipulating electronic polarizations such as ferroelectric or spin polarizations has recently emerged as an effective strategy for enhancing the efficiency of photocatalytic reactions. This study demonstrates the control of electronic polarizations modulated by ferroelectric and magnetic approaches within a two-dimensional (2D) layered crystal of copper indium thiophosphate (CuInP2S6) to boost the photocatalytic reduction of CO2. We investigate the substantial influence of ferroelectric polarization on the photocatalytic CO2 reduction efficiency, utilizing the ferroelectric-paraelectric phase transition and polarization alignment through electrical poling. Additionally, we explore enhancing the CO2 reduction efficiency by harnessing spin electrons through the synergistic introduction of sulfur vacancies and applying a magnetic field. Several advanced characterization techniques, including piezoresponse force microscopy, ultrafast pump-probe spectroscopy, in situ X-ray absorption spectroscopy, and in situ diffuse reflectance infrared Fourier transformed spectroscopy, are performed to unveil the underlying mechanism of the enhanced photocatalytic CO2 reduction. These findings pave the way for manipulating electronic polarizations regulated through ferroelectric or magnetic modulations in 2D layered materials to advance the efficiency of photocatalytic CO2 reduction.

Polarization control of the property of dopants in semiconductors

Polarization control of the property of dopants in semiconductors

Passively harmonic mode-locked GHz U-band femtosecond pulse generation based on soliton self-frequency shift.

We demonstrate a GHz U-band fiber laser harnessing soliton self-frequency shift (SSFS). The seed source is a passively harmonic mode-locked (HML) fiber laser based on carbon nanotubes (CNTs) polymer film. By adjusting the pump power and polarization controller (PC) appropriately, the repetition rate can be tuned up to 1.104 GHz with a side mode suppression ratio (SMSR) of 42.5 dB. The seed source with different repetition rates can be frequency shifted from C-band to U-band in a piece of dispersion-shifted fiber (DSF) after amplification. We selected three repetition rates (457.8 MHz, 700.1 MHz, and 1104.1 MHz) and systematically studied the impact of different repetition rates on SSFS. The broad tuning range of wavelengths covering the entire U-band can be obtained by adjusting the pump power of the main amplifier. To the best of our knowledge, the demonstrated laser is the first U-band femtosecond fiber laser based on passively HML with a repetition rate over 1 GHz.

Polarization control of lasing from few-layer MoTe2 coupled with the optical metasurface supporting quasi-trapped modes

The development of technology for integrating optical metaresonators with two-dimensional and layered van der Waals (vdW) materials opens up broad prospects for the creation of subdiffraction concentrators of electromagnetic energy, surface-emitting lasers, laser displays, and highly efficient nonlinear converters. In this work, we develop a straightforward strategy for the design and fabrication of surface-emitting laser devices based on few-layer transition metal dichalcogenides placed on the dielectric metasurfaces in the regime of quasi-trapped mode excitation. We optimize the parameters of MoTe2 flake and Si metasurface to achieve a positive feedback and to observe the lasing, resulting from their integration, with the predicted characteristics. Promising potential for the development of vdW-metalaser platform is associated with the possibility of simple polarization control of lasing regimes by employing the features of the bianisotropic response of the metasurface's building blocks.

Switchable red, blue-green emission using polarized optical fibre loop mirror in upconversionPr3+/Yb3+-doped ZBLAN fibre laser system

This manuscript experimentally demonstrates a switchable upconversion visible fibre laser system. The laser system is based on a linear fibre laser cavity with Praseodymium–Ytterbium codoped fluorozirconate (ZBLAN) optical fibre as a gain medium. The fibre laser cavity integrates a fibre loop mirror with a polarization controller to switch between multiple visible spectra. The optical fibre laser source provides dual blue and green emission with a centred wavelength of 490 nm and 520 nm, as well as red emission with a bandwidth of 115 nm, from orange to deep red with peaks centred at 605 nm, 635 nm, 693 nm, and 715 nm. The mentioned emissions can be switched and combined to generate almost pure white emission, white emission with high deep-red contribution, and vivid red. In addition, it demonstrated visible emission separation in an upconversion laser system via polarization, generating a wideband switched red-blue-green light source.