Plate System Research Articles

Comparison of the Hook Plate versus TightRope System in the Treatment of Acute Type III Acromioclavicular Dislocation

The objective of this study is to compare the effectiveness of the clavicular hook plate (HP) technique and the minimally invasive coracoclavicular (CC) fixation with a TightRope (MITR) procedure in treating acute unstable distal clavicle dislocation. MITR (minimally invasive TightRope) group had 21 patients, and the open reduction and internal fixation (HP) group included 23 patients. Researchers compared MITR and HP (hook plate) outcomes for the treatment of acute type III AC joint dislocation in a retrospective analysis. The patients were followed up at 1 3, 6, and 12 months postoperatively. Complications were analyzed such as redislocation, fractures, implant-related complications, or subacromial erosion. For the clinical outcomes, the visual analog scale (VAS) (0: no pain, 10: worst possible pain), Constant-Murley score (CMS) (100: no pain, 0: maximum pain), the average satisfaction score with their current shoulder function (range: 0-10), and the University of California at Los Angeles Shoulder score (UCLA) (>27 good/excellent <27 fair/poor) were recorded at the last follow-up. There were 21 sufferers in the MITR group, which comprises 19 males and 2 females and 23 individuals in the HP group (20 men and 3 women), with average ages of 43.9 and 39.2, respectively. Age, sex, laterality, and the interval between injury and surgery did not significantly differ between the two groups (0.357, 0.792, 0.432, and 0.55, respectively). No statistically significant difference was found between the groups in terms of the VAS score and CMS score at one year postoperatively. The mean CCD at the initial trauma and last follow-up was not significantly different between the MITR and HP groups (p=0.365, p=0.412 respectively). For treating acute type III AC dislocations, the minimally invasive TightRope (MITR) system and the hook plate technique were great options. However, the minimally invasive TightRope system showed further benefits such as reduced reoperation for implant removal and reduced risk of subacromial distal clavicle osteolysis.

Vector coding reveals the underlying balance control strategies used by humans during translational perturbation

Postural control research has focused on standing balance experiments on platforms moving with relatively large amplitudes (0.1–0.2 m). This study investigated balance strategies while standing on a platform moving 4 mm in anterior-posterior direction with frequency scaled linearly from 0.4 to 6 Hz. Platform motion and kinematic and kinetic information for nine healthy participants were recorded using motion capture and force plate systems. Coordination between hip, knee and ankle joint torque, and centre of mass (COM) and centre of pressure (COP) motion was quantified by vector coding. Significant main effect of platform frequency for knee-ankle and COP-COM phase relationship was observed (p = 0.023, p = 0.016). At frequencies below 2.11 and 2.34 Hz, ankle strategy was recruited. With ankle strategy, in-phase COP-COM motion with COP dominancy occurred at frequencies below 2.19 and 2.23 Hz during scaling up and down, respectively. As platform frequency passed these values, COM dominated over COP which was followed by anti-phase knee-ankle torque, called a knee strategy, and anti-phase motion between the COP and COM that allowed COP to regain dominance over COM. Collectively, we reveal knee strategy as a new and relevant strategy in real-life settings, and transition between ankle and knee strategies that underpinned transition between COP-COM relative motion.

Green microextraction methodologies for sample preparations

Microextraction for analytical sample preparations became a reality with the introduction of solid phase microextraction (SPME) in 1987–90, followed by the development over the next two decades of the liquid phase microextraction (LPME) modes: single drop microextraction (SDME), hollow-fiber microextraction (HF-LPME), electromembrane extraction (EME) and dispersive liquid-liquid microextraction (DLLME). Parallel to the developments of SPME and LPME, more sensitive instrumentation and environmentally friendly solvents were also being developed, requiring reduced sample amounts and solvent volumes. Automation, using standard instrumental autosamplers, fluid techniques and 96 well plate systems, has further enhanced microextraction methods. Over the last decade, a further reduction in sample size and extraction volume, along with automation, has been possible with the development of microfluidic systems. A crucial companion to this progress has been the introduction of tools for assessing the relative overall greenness of analytical microextraction methods, which should be used in comparing proposed methods with published procedures. In this review we provide the reader with categorized lists of microextraction reviews and application papers, which contain hundreds of additional references, as an aid to accessing needed information for use in further developments of these important analytical techniques.

Application of the Dispersed Low-Pressure Gas-Liquid Flow in the Cooling System of Lithium Divertor Plates of the Tokamak

Application of the Dispersed Low-Pressure Gas-Liquid Flow in the Cooling System of Lithium Divertor Plates of the Tokamak

Technique and clinical results of a new intramedullary support nail and plate system for fixation of 3- or 4- part proximal humeral fractures in older adults

BackgroundInternal fixation of complex proximal humeral fractures (PHF) with osteoporosis is associated with a high incidence of complications. This study introduces the technique and clinical results of a novel intramedullary support nail and plate system (ISNPs) for the internal fixation of 3- or 4- part PHF in older adults. The ISNPs combines the concept of intramedullary support and dynamic fixation into a locking plate fixation system that can be applied using a minimally invasive surgical approach.MethodsA total of 46 consecutive patients diagnosed with 3- or 4-part PHF that met the criteria were included in this study, including 18 in the ISNPs group and 28 in the conventional locking plate (LP) group. Clinical results, including operative time, intraoperative bleeding, reduction quality, subjective outcome ratings, and complications, were compared between the two groups. Functional outcomes were evaluated using the Constant score and disability of the arm, shoulder, and hand (DASH) questionnaire at 1-year follow-up.ResultsThere were no significant differences in age, sex, local bone quality, Neer-fracture type, and follow-up time between the ISNPs and LP groups. For clinical analysis, there were no significant differences in intraoperative bleeding and operation time between the ISNPs and LP groups. Significant differences were observed in the percentage of the malreduced cases, Constant and DASH score analysis, and the patients’ subjective evaluation (‘excellent’ and ‘good’ %) between the two groups.ConclusionThe ISNPs technique proposed in this study provides a novel hybrid internal fixation model for complex PHF with osteoporosis. The clinical results at 1-year follow-up confirmed the advantage of applying it to 3- or 4- part PHF in older patients. Further studies are required to optimize its design and explore its optimal indications.

Is the Zero-P Spacer Suitable for 3-Level Anterior Cervical Discectomy and Fusion Surgery in Terms of Sagittal Alignment Reconstruction: A Comparison Study with Traditional Plate and Cage System.

The Zero-P spacer was primarily developed aiming to reduce the morbidity associated with the traditional anterior cervical plate. During the past decade, many authors have reported the use of Zero-P spacers for anterior cervical discectomy and fusion (ACDF) of one or two segments. Nevertheless, there is still a paucity of knowledge on the safety and feasibility of using Zero-P spacers for 3-level fixation. The objective of this study was to investigate the clinical and radiological outcomes, with a focus on the sagittal alignment reconstruction of 3-level ACDF surgery using Zero-P spacers versus those using a traditional plate and cage system. From Sep 2013 to Aug 2016, a total of 44 patients who received 3-level ACDF surgery due to cervical spondylotic myelopathy were recruited. The Zero-P spacer was used in 23 patients (group ZP) and the traditional plate and cage system in 21 (group PC). Clinical outcomes were analyzed by Neck Disability Index (NDI) and Japanese Orthopedic Association (JOA) scores, and dysphagia was evaluated using the Bazaz score. Radiological outcomes, including fusion rate, adjacent segment degeneration (ASD), and especially changes in cervical sagittal alignment, were analyzed. The NDI and JOA scores did not differ significantly between the two groups postoperatively (p &gt; 0.05); however, there was significantly less dysphagia in patients using Zero-P spacers at the 3- and 6-month follow-up (p &lt; 0.05). At the 24-month follow-up, the fusion rate and ASD were similar between the two groups (p &gt; 0.05). Interestingly, patients using Zero-P spacers had a significantly lower postoperative C2-7 Cobb angle and fused segment Cobb angle, compared to those using a traditional plate and cage system (p &lt; 0.05); meanwhile, the fused segment disc wedge was also found to be significantly smaller in patients using Zero-P spacers after surgery (p &lt; 0.05). Moreover, we further divided patients into subgroups according to their cervical lordosis. In patients with a preoperative C2-7 Cobb angle ≤ 10°, significantly less cervical and local lordosis, as well as disc wedge, were seen in group ZP after surgery (p &lt; 0.05), while in others with a preoperative C2-7 Cobb angle &gt; 10°, no significant difference in postoperative changes of the cervical sagittal alignment was seen between group ZP and group PC (p &gt; 0.05). Zero-P spacers used in 3-level ACDF surgery could provide equivalent clinical outcomes and a lower rate of postoperative dysphagia, compared to the traditional plate and cage system. However, our results showed that it was inferior to the cervical plate in terms of sagittal alignment reconstruction for 3-level fixation. We recommend applying Zero-P spacers for 3-level ACDF in patients with good preoperative cervical lordosis (C2-7 Cobb angle &gt; 10°), in order to restore and maintain physiological curvature of the cervical spine postoperatively.

Sensory Interaction and Balancing Ability Evaluation of the Elderly Using a Simplified Force Plate System.

The Wii balance board (WBB) is a simplified force plate system used to evaluate the balancing ability of the elderly via a sensory interaction task to confirm a significant standing balance index. The accuracy of this system has been verified in previous studies. In this study, an instrumented and modified clinical test of sensory interaction on balance (i-mCTSIB) was performed on 84 elderly subjects, and the variables for center of pressure (CoP) were calculated using WBB for each task condition. The results indicate that the visual condition has a significant effect on the sway proprioceptive sensory variables with a foam condition as their complexity increases. In addition, the correlation between the variable and Berg Balance Scale was not confirmed since CTSIB is a sensory interaction on balance ability. Therefore, WBB can be used to evaluate balancing ability based on sensory interactions consisting of the surface condition.

Plate tectonics in the twenty-first century

Plate tectonics was originally established as a kinematic theory of global tectonics, in which the Earth’s rigid outer layer, the lithosphere, consists of different size plates that move relative to each other along divergent, convergent or transform boundaries overlying the ductile asthenosphere. It comprises three elements: rigid lithosphere plates, ductile asthenosphere, and coupled movement systems. It operates through the interlinked processes of continental drift, seafloor spreading and lithospheric subduction, resulting in the generation, modification and demise of lithospheres throughout geological time. The system of lithospheric plates in horizontal and vertical movements forms the spatiotemporal linkages of matter and energy between the surface and interior of Earth, advancing the kinematic theory with a dynamic explanation. While top-down tectonics through lithospheric subduction plays a key role in the operation of plate tectonics, it is balanced for the conservation of both mass and momentum on the spherical Earth by bottom-up tectonics through asthenospheric upwelling to yield seafloor spreading after continental breakup. The gravity-driven subduction of cool lithosphere proceeds through convergence between two plates on one side, and rollback of the subducting slab makes the vacancy for upwelling of the hotter asthenosphere to form active rifting in backarc sites. Plate convergence is coupled with plate divergence between two plates along mid-ocean ridges on the other side, inducing passive rifting for seafloor spreading as a remote effect. Thus, plate tectonics is recognizable in rock records produced by tectonic processes along divergent and convergent plate margins. Although the asthenospheric upwelling along fossil suture zones may result in continental breakup, seafloor spreading is only induced by gravitational pull of the subducting oceanic slab on the remote side. Therefore, the onset and operation of plate tectonics are associated with a series of plate divergent-convergent coupling systems, and they are critically dependent on whether both construction and destruction of plates would have achieved and maintained the conservation of both mass and momentum on the spherical Earth. Plate margins experience different types of deformation, metamorphism and magmatism during their divergence, convergence or strike-slip, leaving various geological records in the interior of continental plates. After plate convergence, the thickened lithosphere along fossil suture zones in intracontinental regions may be thinned by foundering. This causes the asthenospheric upwelling to reactivate the thinned lithosphere, resulting in superimposition and modification of the geological record at previous plate margins. The operation of plate tectonics, likely since the Eoarchean, has led to heat loss at plate margins and secular cooling of the mantle, resulting in the decrease of geothermal gradients and the increase of rheological strength at convergent plate margins. Modern plate tectonics is characterized by the predominance of rigid plate margins for cold subduction, and it has prevailed through the Phanerozoic. In contrast, ancient plate tectonics, that prevailed in the Archean and Proterozoic, is dominated by relatively ductile plate margins for collisional thickening at forearc depths and then warm subduction to subarc depths. In either period, the plate divergence after lithospheric breakup must be coupled with the plate convergence in both time and space, otherwise it is impossible for the operation of plate tectonics. In this context, the creation and maintenance of plate divergent-convergent coupling systems are responsible for the onset and operation of plate tectonics, respectively. Although a global network of mobile belts is common between major plates on modern Earth, it is difficult to find its geological record on early Earth if microplates would prevail at that time. In either case, it is important to identify different types of the geological record on Earth in order to discriminate between the different styles of plate tectonics in different periods of geological history.

Observational study of sterile field bioburden levels during orthopedic arthroplasty surgery in operating rooms complying with current United States ventilation specifications

Airborne contamination from microbe carrying particles (MCPs) is a risk factor for devastating early onset periprosthetic joint infection(PJIs). There are no published guidelines to quantify this risk factor for PJI events. This observational cohort project addresses this gap and utilizes a simple passive system to produce quantitative data from 80 total joint replacement cases performed in operating rooms built to current USA standards. A petri dish-based system inspired by industrial cleanroom technology was deployed. Surgical helmet systems (SHSs) and strict protocols were used in all cases. 450 MCPs/m2 was used as a cutoff for bioburden. This benchmark corresponds to the ultraclean air standard of 10 MCPs/m3. 75/80 cases (94%) achieved desired benchmark levels of bioburden at the wound zone compared to only 52/80 (65%) of back table zones. No surgical site infections (SSI) or PJI events (0/80; 95% CI, 0.00-3.68%) at minimum 18-month (average 25.8 months) follow-up were detected. The current USA ventilation design uses low velocity airflow and appears to achieve ultraclean air conditions at the surgical site but requires SHSs and strict protocols. Higher contamination levels seen in back tables are consistent with this design. This settle plate system may be useful for early onset PJI event investigations and thus lower the incidence of these complications.

Modeling of Acoustic Vibration Theory Based on a Micro Thin Plate System and Its Control Experiment Verification

As a novel control method, acoustic manipulation technology shows extraordinary talents in culturing of tissue and cell, microchip processing and research on material chemistry, which is closely relevant to the vibration modes and the driving signals of the acoustic system. In this paper, bringing up reasonable assumptions, from the perspective of vibration force analysis of a thin plate, the response function of the forced vibration thin plate is derived combining with the Green’s function. Simultaneously, the effective vibration frequencies of micro thin plate are determined. Using the finite element simulation software Comsol 5.6 building thin plate geometry in 2D, the vibration modes of a thin plate are numerically analyzed from the top view and the side view. Additionally, an experimental platform is established, and the vibration experiments of a square micro thin plate (5 cm × 5 cm × 0.625 mm) driven by a central acoustic source is conducted. By comparison, the corresponding experimental results are in good agreement with simulations. Furthermore, single particle motion control is also realized based on the presented platform, and the underlying mechanism is the effects of nodes and anti-nodes on particle motion. The vibrating platform here will become an effective manipulation tool for many scientific fields with the advantage of micro size, good compatibility, and multipurpose.

Voltage-controlled topological interface states for bending waves in soft dielectric phononic crystal plates

The operating frequency range of passive topological phononic crystals is generally fixed and narrow, limiting their practical applications. To overcome this difficulty, here we design and investigate a one-dimensional soft dielectric phononic crystal (PC) plate system with actively tunable topological interface states via the mechanical and electric loads. We use nonlinear electroelasticity theory and linearized incremental theory to derive the governing equations. First we determine the nonlinear static response of the soft dielectric PC plate subjected to a combination of axial force and electric voltage. Then we study the motion of superimposed incremental bending waves. By adopting the Spectral Element Method, we obtain the dispersion relation for the infinite PC plate and the transmission coefficient for the finite PC plate waveguide. Numerical results show that the low-frequency topological interface state exists at the interface of the finite phononic plate waveguide with two topologically different elements. By simply adjusting the axial force or the electric voltage, an increase or decrease in the frequency of the topological interface state can be realized. Furthermore, applying the electric voltage separately on different elements of the PC plate waveguide is a flexible and smart method to tune the topological interface state in a wide range. These results provide guidance for designing soft smart wave devices with low-frequency tunable topological interface states.

Microstructure, Mechanical and Tribological Properties of Arc Ion Plating NbN-Based Nanocomposite Films.

NbN, NbN-Ag and NbN/NbN-Ag multilayer nanocomposite films were successfully deposited by an arc ion plating system (AIP), and their microstructures, mechanical and tribological properties were systematically investigated. The results show that all the films had a polycrystalline structure, and the Ag in the Ag-doped films existed independently as a face-centered cubic phase. The content of Ag in NbN-Ag and NbN/NbN-Ag films was 20.11 and 9.07 at.%, respectively. NbN films fabricated by AIP technique had excellent mechanical properties, and their hardness and critical load were up to 44 GPa and 34.6 N, respectively. The introduction of Ag into NbN films obviously reduced the friction coefficient at room temperature, while the mechanical properties and wear resistance were degraded sharply in comparison with that of NbN films. However, the NbN/NbN-Ag films presented better hardness, H/E*, H3/E*2, adhesive strength and wear resistance than NbN-Ag films. Additionally, analysis of wear surfaces of the studied films and Al2O3 balls using 3D images, depth profiles, energy dispersive spectrometry (EDS) and Raman spectra indicated that the main wear mechanisms of NbN and NbN/NbN-Ag films were adhesive and oxidation wear with slight abrasive wear, while the severe abrasive and oxidation wear were the dominant wear mechanism for NbN-Ag films.

Catastrophic failure of a titanium locking plate in a proximal humeral fracture: case report and literature review

BackgroundAngular stable locking plates have shown good clinical results in treating proximal humeral fractures, but complications are not uncommon. This study reported a rare case of catastrophic failure of a titanium locking plate. A retrieval analysis of the implants was performed using an optic microscope and a scanning electron microscope.Case presentationA 69-year-old male reported a right proximal humeral fracture at the surgical neck and was treated by open reduction and internal fixation with a locking plate system. Ninety-six days after surgery, the patient came to clinic for acute local pain over the shoulder without any trauma. The radiographs showed a complete breakage of the implant accompanying displaced fracture. Revision surgery was performed to restabilize the fracture with a longer locking plate. The follow-up radiographs at 9 months showed complete union of the bone fracture.ConclusionsFrom the retrieval analysis, repetitive torsion loads on the vulnerable area of the implant are assumed to cause this catastrophic event. It is recommended that adequate activity restriction, such as reaching, be undertaken to avoid this rare complication. Current study also provides contributive information for the modification of plate design and pre-operative planning for device configuration to improve the success rate of locking plate fixation.

Treating Inferior Pole Fracture of Patella with Hand Plating System: First Clinical Results.

Inferior pole fractures of patella are notorious fractures where it is difficult to obtain rigid internal fixation by conventional methods. The objective of the study was to introduce the Hand Plating System (HPS), which was a novel surgical technique for inferior pole fractures of patella, and to report the radiological and clinical outcomes following the application of the surgical technique. The study was designed as a retrospective cohort study. Between July 2017 and December 2018, 30 patients who were diagnosed with inferior pole fracture of the patella without additional orthopaedic injuries were enrolled in this case series. After X-ray and 3D-CT examinations, all patients underwent open reduction and internal fixation by HPS with or without supplementary cannulated screw and lag screw stabilization. The bony union time, final range of motion (ROM), Bostman score, visual analog scale (VAS), and complications were measured as the clinical outcomes under a minimum of 12months of follow-up. All of the operations went well with the mean operative time of 76.2 ± 15.3 min. Bony union achieved in all the cases at an average of 9.5 ± 1.4 weeks after surgery. There was no loss of reduction, fixative failure, or surgical implant removal during follow-up. The average range of motion 1 year postoperatively was 0°-123.3°. The mean Bostman Score at the last follow-up was 26.8 ± 2.1 with the satisfactory rate of 100%. The pain feeling during walking as measured by VAS averaged at 0.9 ± 1.3. No complications developed except for one case of poor incision healing, which healed eventually after surgical debridement. HPS was demonstrated as a secure fixation and as a kind of tension band for inferior pole fractures of the patella. Satisfactory recovery of knee function and low complication rate, including no need for hardware removal, could be expected.

Episodic Plate Tectonics on Europa: Evidence for Widespread Patches of Mobile-Lid Behavior in the Antijovian Hemisphere.

A nearly pole-to-pole survey near 140°E longitude on Europa revealed many areas that exhibit past lateral surface motions, and these areas were examined to determine whether the motions can be described by systems of rigid plates moving across Europa's surface. Three areas showing plate-like behavior were examined in detail to determine the sequence of events that deformed the surface. All three areas were reconstructed to reveal the original pre-plate motion surfaces by performing multi-stage rotations of plates in spherical coordinates. Several motions observed along single plate boundaries were also noted in previous works, but this work links together isolated observations of lateral offsets into integrated systems of moving plates. Not all of the surveyed surface could be described by systems of rigid plates. There is evidence that the plate motions did not all happen at the same time, and that they are not happening today. We conclude that plate tectonic-like behavior on Europa occurs episodically, in limited regions, with less than 100km of lateral motion accommodated along any particular boundary before plate motions cease. Europa may represent a world perched on the theoretical boundary between stagnant and mobile lid convective behavior, or it may represent an additional example of the wide variations in possible planetary convective regimes. Differences in observed strike-slip sense and plate rotation directions between the northern and southern hemispheres raise the question of whether tidal forces may influence plate motions.

The time-varying effect of thiourea on the copper electroplating process with industrial copper concentrations

Electrorefining is the process of choice to purify several metals, among which is copper. A crucial process parameter in electrorefining, and electroplating in general, is the additive activity. Several additives are introduced to the electrolyte to ensure a morphological smooth copper deposit. Thiourea is a crucial but complex additive used in copper electrorefining, it is known to degenerate and both the reaction product as thiourea itself can complex with the copper ions. Unfortunately, time dependent additive studies and mechanistic knowledge of the effect of aged electrolyte on the cathodic part of the electrorefining process are scarce. In this work, operando Odd Random Phase Electrochemical Impedance Spectroscopy (ORP-EIS) is used to study the electrochemistry of a copper plating system containing industrial copper concentrations. The approach applied enables the investigation of the time-varying effect of additives, in this case thiourea and chlorides, assisting the electroplating of copper.

Flow-induced vibration of a circular cylinder with an attached elastic plate of high aspect ratio

The flow-induced transverse vibration of a cylinder (diameter D*) with an attached flexible and elastic plate of high aspect ratio to its leeward side is investigated numerically at a low Reynolds number of 150 for a range of reduced velocities (Ur) using an in-house developed fluid solver based on curvilinear immersed boundary method strongly coupled with an open-source finite element-based structural solver. It was observed that an attached elastic plate of width B=B*/D*=0.1 and length L=L*/D*=1 suppresses large vibrations of the cylinder, but one with length L = 2, contrary to previous studies, amplifies vibrations up to five times of an isolated cylinder. Three regimes were observed: vortex-induced vibration (VIV), suppression, and galloping. In VIV regime for 3≤Ur≤7, lock-in was observed where the vortex shedding frequency from the plate-cylinder system was seen to slightly increase relative to that of static cylinder–plate system to match with the natural frequency of the cylinder and the plate. In this regime, the deformations of the elastic plate were large (max. 91% of L) and in high modes (up to fifth mode), leading to new vortex patterns. The transverse displacement of the cylinder–plate system was found to reach nearly twice of an isolated cylinder in this regime. For 7&amp;lt;Ur≤9, the cylinder–plate system was pushed into suppression regime, wherein its displacement was nullified because of lack of vorticity interaction and out-of-phase deformation. Beyond Ur = 9, the cylinder–plate system vibrated in the galloping regime, wherein it shed and generated forces as an asymmetric body creating an angle of attack with the incoming flow. The primary mode of deformation of the elastic plate progressively increased from second mode to third mode in galloping regime, and the transverse displacement of cylinder showed a linear increase with the increase in reduced velocity until Ur = 18. The vibration amplitude of the cylinder was higher in the galloping regime, but the vibrations of the plate were more intense (higher amplitude and mode) in the VIV regime. New vortex patterns were observed in the VIV and galloping regimes ranging from 2S mode till 2T mode including all the vortex pattern between them like 2S, 2P, 2Q, and P + T modes, which are reported for the first time.

Study on impact dynamic characteristics of semi-autogenous mill liner based on improved multivariable method

The impact resistance of semi-autogenous mill liner has an important influence on the reliable operation of the system. The complex dynamic characteristics in the process of collision with abrasive medium are studied by the improved multivariable method proposed in this paper. Firstly, based on manifold element method, the deformation of abrasive medium and lining plate in the contact area is expressed by the coordinates of first-order manifold element basis function, while the deformation of the non-contact region is described by modal coordinates to improve the traditional multivariable method, and the displacement constraint equations as well as the acceleration constraint equations of the collision system are derived, then the Lagrange method is used to establish the impact dynamic equation of abrasive medium and lining plate system. Secondly, a collision test rig between abrasive medium and lining plate was built to verify the correctness and accuracy of the proposed method. Finally, the influence of structural parameters and motion parameters of abrasive medium and lining plate on the dynamic characteristics of collision system is analyzed by parameter analysis method. It is found that when the Poisson’s ratio of abrasive medium to lining plate material exceeds 1.0, the increase amplitude of stress becomes smaller. The increase amplitude of displacement, velocity, acceleration and stress at the collision contact point decreases when the initial velocity of abrasive medium exceeds 3.0 m/s. The stress at the collision contact point changes greatly, and the maximum acceleration occurs in advance when the radius of abrasive medium exceeds 20 mm. When the thickness of liner exceeds 40 mm, the time of maximum acceleration to reach is almost unchanged. The results show that compared with the traditional multivariable method, the improved multivariable method can increase the modeling efficiency and solving accuracy, and lay a theoretical foundation for optimizing the structure of the liner and raising the service life of the system.

Clinical and functional outcomes of displaced proximal humerus fractures treated with PHILOS plate system and autologous bone graft.

This retrospective case series analyses the clinical and radiological outcomes of displaced proximal humerus fractures treated with PHILOS plate system and iliac crest bone autograft. Twenty-six patients with displaced fractures of proximal humerus, who were treated with PHILOS plate and autologous iliac crest bone grafts from January 2015 to September 2020, were included in this study. The inclusion criteria were proximal humerus fractures with displacement of more than 1cm and angulation of more than 45 degrees. The functional outcomes were evaluated using DASH and constant score. Radiological outcomes were measured by calculating the fracture union. The average age of the cohort was 47.28±13.69 years. Over all, the mean DASH score was 10.25 and constant score was 77.65 at three-year follow-up. The PHILOS plate with iliac crest bone autologous graft provides good radiological and functional outcomes, especially for the cases with bone defects and poor-bone stock.

Real-time implementation of Fuzzy Logic Controller based on chicken swarm optimization for the ball and plate system

Abstract The ball and Plate (BaP) system is the typical example of the nonlinear dynamic system that is used in a wide range of engineering applications. So, many researchers in the control field are using the Bap system to check robust controllers under several points that challenge it, such as internal and external disturbances. Our manuscript proposed a position control intelligent technique with two directions (2D) for the BaP system by optimized multi Fuzzy Logic Controllers (FLC’s) with Chicken Swarm Optimization (CSO) for each one. The gains and rules of the FLC’s can tune based on the CSO. This proposal utilizes the ability of the FLC’s to observe the position of the ball. At our work, the BaP system that belonged to Control Laboratory/Systems and Control Engineering department is used for real-time proposal implementation. The results have been showing a very good percentage enhancement in settling time, rise time, and overshoot, of the X-axis and Y-axis, respectively.