Wakefield Acceleration Research Articles

Plasma Wakefield Acceleration Driven by XCELS Laser Pulse

Plasma Wakefield Acceleration Driven by XCELS Laser Pulse

Single-Shot Diagnosis of Electron Energy Evolution via Streaked Betatron X Rays in a Curved Laser Wakefield Accelerator.

We report on an experimental observation of the streaking of betatron x rays in a curved laser wakefield accelerator. The streaking of the betatron x rays was realized by launching a laser pulse into a plasma with a transverse density gradient. By controlling the plasma density and the density gradient, we realized the steering of the laser driver, electron beam, and betatron x rays simultaneously. Moreover, we observed an energy-angle correlation of the streaked betatron x rays and utilized it in diagnosing the electron acceleration process in a single-shot mode. Our work could also find applications in advanced control of laser beam and particle propagation. More importantly, the angular streaked betatron x ray has an intrinsic spatiotemporal correlation, which makes it a promising tool for single-shot pump-probe applications.

Stabilization and correction of aberrated laser beams via plasma channelling.

High-power laser applications, and especially laser wakefield acceleration, continue to draw attention through various research topics, and may bring many industrial applications based on compact accelerators, from ultrafast imaging to cancer therapy. However, one main step towards this is the arch issue of stability. Indeed, the interaction of a complex, aberrated laser beam with plasma involves a lot of physical phenomena and non-linear effects, such as self-focusing and filamentation. Different outcomes can be induced by small laser instabilities (i.e. laser wavefront), therefore harming any practical solution. One promising path to be explored is the use of a plasma channel to possibly guide and correct aberrated beams. Complex and costly experimental facilities are required to investigate such topics. However, one way to quickly and efficiently explore new solutions is numerical simulations, especially Particle-In-Cell (PIC) simulations if, and only if, one is confidently implementing such aberrated beams which, contrary to a Gaussian beam, do not have analytical solutions. In this research, we propose two new advancements: the correct implementation of aberrated laser beams inside a 3D PIC code, showing a great consistency, under vacuum, compared to the calculations with Fresnel theory); and the correction of their quality via the propagation inside a plasma channel. We demonstrate improvements in the beam pattern, becoming closer to a single plasma mode with less distortions, and thus suggesting a better stability for the targeted application. Through this confident calculation technique for distorted laser beams, we are now expecting to proceed with more accurate PIC simulations, closer to experimental conditions, and obtained results with plasma channels indicate promising future research.

Wakefield generation in hydrogen and lithium plasmas at FACET-II: Diagnostics and first beam-plasma interaction results

Plasma wakefield acceleration provides ultrahigh acceleration gradients of tens of GeV/m, providing a novel path toward efficient, compact, TeV-scale linear colliders, and high brightness free electron lasers. Critical to the success of these applications is demonstrating simultaneously high gradient acceleration, high energy transfer efficiency, and preservation of emittance, charge, and energy spread. Experiments at the FACET-II National User Facility at SLAC National Accelerator Laboratory aim to achieve all of these milestones in a single-stage plasma wakefield accelerator, providing a 10 GeV energy gain in a <1 m plasma with high energy transfer efficiency. Such a demonstration depends critically on diagnostics able to measure emittance with mm mrad accuracy, energy spectra to determine both percent level energy spread, and broadband energy gain and loss, incoming longitudinal phase space, and matching dynamics. This paper discusses the experimental setup at FACET-II, including the incoming beam parameters from the FACET-II linac, plasma sources, and diagnostics developed to meet this challenge. Initial progress on the generation of beam ionized wakes in meter-scale hydrogen gas is discussed as well as commissioning of the plasma sources and diagnostics. Published by the American Physical Society 2024

All-optical source size and emittance measurements of laser-accelerated electron beams

Novel schemes for generating ultralow emittance electron beams have been developed in past years and promise compact particle sources with excellent beam quality suitable for future high-energy physics experiments and free-electron lasers. Recent theoretical work has proposed a laser-based method capable of resolving emittances in the sub 0.1 mm mrad regime by modulating the electron phase space ponderomotively. Here we present the first experimental demonstration of this scheme using a laser wakefield accelerator. The observed emittance and source size are consistent with published values. We also show calculations demonstrating that tight bounds on the upper limit for emittance and source size can be derived from the “laser-grating” method even in the presence of low signal to noise and uncertainty in laser-grating parameters. Published by the American Physical Society 2024

Flying focus laser wake field acceleration by donut shape pulse

Flying focus laser wake field acceleration by donut shape pulse

Laser-driven pointed acceleration of electrons with preformed plasma lens

The simultaneous laser-driven acceleration and angular manipulation of the fast electron beam are experimentally demonstrated. The bunch of multi-MeV energy charged particles is generated during the propagation of the femtosecond laser pulse through the near-critical plasma slab accompanied by plasma channeling. Plasma is formed by the controlled breakdown of a thin-tape target by a powerful nanosecond prepulse. The electron beam pointing approach is based on the refraction of a laser pulse in the presence of a strong radial density gradient in the breakdown of the tape with a small displacement of the femtosecond laser beam relative to the breakdown symmetry axis. A shift of several micrometers makes it possible to achieve beam deflection by an angle up to 10° with acceptable beam charge and spectrum conservation. This opens up opportunities for applications for scanning objects with an electron beam and the multistage electron beam energy gain in consecutive laser accelerators without bulk magnetic optics for particles. Experimental findings are supported by numerical particle-in-cell calculations of laser-plasma acceleration and hydrodynamic simulations. Published by the American Physical Society 2024

Plasma electron acceleration driven by a long-wave-infrared laser

Laser-driven plasma accelerators provide tabletop sources of relativistic electron bunches and femtosecond x-ray pulses, but usually require petawatt-class solid-state-laser pulses of wavelength λL ~ 1 μm. Longer-λL lasers can potentially accelerate higher-quality bunches, since they require less power to drive larger wakes in less dense plasma. Here, we report on a self-injecting plasma accelerator driven by a long-wave-infrared laser: a chirped-pulse-amplified CO2 laser (λL ≈ 10 μm). Through optical scattering experiments, we observed wakes that 4-ps CO2 pulses with < 1/2 terawatt (TW) peak power drove in hydrogen plasma of electron density down to 4 × 1017 cm−3 (1/100 atmospheric density) via a self-modulation (SM) instability. Shorter, more powerful CO2 pulses drove wakes in plasma down to 3 × 1016 cm−3 that captured and accelerated plasma electrons to relativistic energy. Collimated quasi-monoenergetic features in the electron output marked the onset of a transition from SM to bubble-regime acceleration, portending future higher-quality accelerators driven by yet shorter, more powerful pulses.

Experimental demonstration of radius-varying active plasma lensing for laser-plasma-accelerated proton beams with increased collection angle

Active plasma lensing, a compact method for intensifying the focus of charged particle beams by providing a magnetic field gradient of kT/m, has emerged as a sought-after technology in laser plasma accelerator applications. However, the utilization of active plasma lenses faces significant hurdles when dealing with laser-driven proton pulses, characterized by their broad bandwidth and high divergence. To address this challenge, we developed a novel active plasma lens with a variable radius, specifically designed to optimize lens geometry in accordance with the beam envelope, and performed the first measurement of its focusing ability. The experimental findings reveal that, compared to conventional cylindrical active plasma lenses, our radius-varying lens exhibits a 2.0-fold improvement in single-energy transmission efficiency, while maintaining comparable achromatic ability. This breakthrough is anticipated to significantly contribute to the miniaturization of laser proton accelerators. Published by the American Physical Society 2024

Laser-driven high-energy proton beams from cascaded acceleration regimes

Laser-driven ion accelerators can deliver high-energy, high-peak current beams and are thus attracting attention as a compact alternative to conventional accelerators. However, achieving sufficiently high energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here we generate proton beams with a spectrally separated high-energy component of up to 150 MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive petawatt laser. The preceding laser light heats the target, leading to the onset of relativistically induced transparency upon main pulse arrival. The laser peak then penetrates the initially opaque target and triggers proton acceleration through a cascade of different mechanisms, as revealed by three-dimensional particle-in-cell simulations. The transparency of the target can be used to identify the high-performance domain, making it a suitable feedback parameter for automated laser and target optimization to enhance stability of plasma accelerators in the future.

Multi-GeV Electron Acceleration in Wakefields Strongly Driven by Oversized Laser Spots.

Experiments were performed on laser wakefield acceleration in the highly nonlinear regime. With laser powers P<250 TW and using an initial spot size larger than the matched spot size for guiding, we were able to accelerate electrons to energies E_{max}>2.5 GeV, in fields exceeding 500 GV m^{-1}, with more than 80pC of charge at energies E>1 GeV. Three-dimensional particle-in-cell simulations show that using an oversized spot delays injection, avoiding beam loss as the wakefield undergoes length oscillation. This enables injected electrons to remain in the regions of highest accelerating fields and leads to a doubling of energy gain as compared to results from using half the focal length with the same laser.

Filamentation Observed in Wakefield Acceleration

Filamentation Observed in Wakefield Acceleration

High transmission efficiency collection system for laser-accelerated proton beams based on permanent magnet quadrupoles prefocusing

A new high transmission efficiency, easily tunable, and cost-effective beam collection system is proposed for laser-accelerated proton beams with large divergence angles and wide energy spectra. In previous experiments conducted at the compact laser plasma accelerator platform of Peking University, a beamline was initially constructed with a collection system based on an electromagnetic quadrupoles (EMQs) triplet. However, due to the limited acceptance angle, the EMQs exhibited a monoenergetic transmission efficiency of only 10% to 20% for laser accelerated proton beams. Permanent magnet quadrupoles (PMQs), known for their high magnetic field gradients, compact size, and lower expenses, are well suited for integration with other readily adjustable transmission elements like EMQs and solenoids, effectively enhancing the beam collection capabilities of the system. In this paper, we show that by introducing a pair of centimeter-sized PMQs in front of the EMQs for beam prefocusing, the beam’s transverse size is quickly compressed, enabling transmission of highly divergent protons. Experimental results demonstrate that the prefocusing by PMQs increased the system’s transmission efficiency by a factor of 2.44 to 6.01 compared to the original setup, while also enhancing the energy selection based on stronger chromatic effect. This method can be extended to 100 MeV high-energy proton beamlines and is crucial for applications of laser plasma accelerators. Published by the American Physical Society 2024

Permanent helical micro-undulators for x-ray free electron lasers

Helical Halbach undulators, formed by four alternately axially and radially magnetized rare-earth helices, produce a stronger field than two planar Halbach undulators with perpendicular polarization. Hybrid undulators of two longitudinally premagnetized rare-earth helices and two initially unmagnetized steel (or vanadium permendur) helices produce an equal or higher field and are easier to implement. We made sure that the required helices with a period of down to 3 mm or even less could be manufactured with high precision using Wire Electric Discharge Machining. According to the simulation results, when using identical electron bunches with moderate initial spreads in energy and angles, the gain in x-ray free electron laser (XFEL) power from replacing planar micro-undulators with the helical micro-undulators under consideration can be significantly greater than predicted by the simplest 1D theory with a cold electron beam. This makes such micro-undulators promising for creating compact XFELs of various types, both based on modern linear accelerators and plasma wakefield accelerators.

Fabrication and Powering Test of a High-Temperature Superconducting Periodic Quadrupole Driving a Short-Length Transport Line for Laser-Plasma Accelerators

Fabrication and Powering Test of a High-Temperature Superconducting Periodic Quadrupole Driving a Short-Length Transport Line for Laser-Plasma Accelerators

Design and Test of a Klystron Intra-Pulse Phase Feedback System for Electron Linear Accelerators

Beam stability and timing jitter in modern linear accelerators are becoming increasingly important. In particular, if a magnetic or radio-frequency (RF) compression regime is employed, the beam time of arrival jitter at the end of the linac can be strictly correlated with the phase noise of the accelerating fields of the RF structure working off-crest. For this reason, since 2008, an RF fast-feedback technique, which acts within each RF pulse, has been successfully employed at LNF-INFN (Laboratori Nazionali di Frascati dell’Istituto Nazionale di Fisica Nucleare) in the SPARC_LAB (Sources for Plasma Accelerators and Radiation Compton with Laser And Beam) facility on S-band (2856 MHz) klystrons powered by pulse-forming network (PFN) modulators, as reported in this paper. However, in order to meet the more stringent requirements of plasma wakefield acceleration schemes, some upgrades to this feedback system have been recently carried out. The first prototype has been experimentally tested on a C-band (5712 MHz) klystron, driven by a solid-state modulator, in order to investigate the possibility for additional improvement resulting from the inherently more stable power source. In this paper, the design, realization and the preliminary measurement results obtained at SPARC_LAB after such upgrades will be reviewed.

Human radiological safety assessment for petawatt laser-driven ion acceleration experiments in CLAPA-T

The newly built Compact Laser Plasma Accelerator–Therapy facility at Peking University will deliver 60 J/1 Hz laser pulses with 30 fs duration. Driven by this petawatt laser facility, proton beams with energy up to 200 MeV are expected to be generated for tumor therapy. During high-repetition operation, both prompt radiation and residual radiation may cause safety problems. Therefore, human radiological safety assessment before commissioning is essential. In this paper, we simulate both prompt and residual radiation using the Geant4 and FLUKA Monte Carlo codes with reasonable proton and as-produced electron beam parameters. We find that the prompt radiation can be shielded well by the concrete wall of the experimental hall, but the risk from residual radiation is nonnegligible and necessitates adequate radiation cooling. On the basis of the simulation results, we discuss the constraints imposed by radiation safety considerations on the annual working time, and we propose radiation cooling strategies for different shooting modes.

Drive Bunch Train for the Dielectric Trojan Horse Experiment at the Argonne Wakefield Accelerator

The recently demonstrated concept of the plasma photocathode, whereby a high-brightness bunch is initialized by laser ionization within a plasma wakefield acceleration bubble, is informally referred to as Trojan Horse wakefield acceleration. In a similar vein, the dielectric Trojan Horse concept incorporates a dielectric-lined waveguide to support a charged particle beam-driven accelerating mode and uses laser initiated ionization of neutral gas within the waveguide to generate a witness beam. One of the advantages of the dielectric Trojan Horse concept is the reduced requirements in terms of timing precision due to operation at a lower frequency. In this paper, we present experimental results on the generation and characterization of a four-bunch drive train for resonant excitation of wakefields in a cylindrical dielectric waveguide conducted at the Argonne Wakefield Accelerator facility. The results lay the foundation for the demonstration of a plasma photocathode scheme within a dielectric wakefield accelerating structure. Modifications to improve capture efficiency with improved beam transmission are suggested as well.

Electro-optic 3D snapshot of a laser wakefield accelerated kilo-ampere electron bunch

Laser wakefield acceleration, as an advanced accelerator concept, has attracted great attentions for its ultrahigh acceleration gradient and the capability to produce high brightness electron bunches. The three-dimensional (3D) density serves as an evaluation metric for the particle bunch quality and is intrinsically related to the applications of an accelerator. Despite its significance, this parameter has not been experimentally measured in the investigation of laser wakefield acceleration. We report on an electro-optic 3D snapshot of a laser wakefield electron bunch at a position outside the plasma. The 3D shape of the electron bunch was detected by simultaneously performing optical transition radiation imaging and electro-optic sampling. Detailed 3D structures to a few micrometer levels were reconstructed using a genetic algorithm. The electron bunch possessed a transverse size of less than 30 micrometers. The current profile shows a multi-peak structure. The main peak had a duration of < 10 fs and a peak current > 1 kA. The maximum electron 3D number density was ~ 9 × 1021 m -3. This research demonstrates a feasible way of 3D density monitoring on femtosecond kilo-ampere electron bunches, at any position of a beam transport line for relevant applications.

Studies on the spatial evolution of pulsed helium plasma

AbstractThe high‐density transient plasma, streaming from a pulsed plasma accelerator (PPA), was diagnosed with a Triple Langmuir probe (TLP) for spatial mapping of the stream in terms of plasma density and temperature. A contour plot for density and temperature shows a distinct form of a highly dense island of plasma with varied plasma temperatures. The formation of such highly dense islands can be correlated with the formation of distinct plasma structures, as observed in astrophysical plasmas and fusion plasma. The results of TLP were supported by the intensity variation derived from signals of a photodetector system. The plasma stream imaged with high‐speed video camera also showed the density fluctuation inside the plasma stream. The estimated maximum density and temperature were ∼7.2 × 1020 m−3 and ∼28 eV, respectively.