Planar Resonator Research Articles

Nutation-orbit resonances: The origin of the chaotic rotation of Hyperion and the barrel instability

While numerous planetary and asteroid satellites show evidence for non-trivial rotation states, none are as emblematic as Hyperion, which has long been held as the most striking example of chaotic spin-orbit evolution in the Solar System. Nevertheless, an analytically tractable theory of the full 3D spin-orbit dynamics of Hyperion has not been developed. We derive the Hamiltonian for a spinning axisymmetric satellite in the gravitational potential of a planet without assuming planar or principal axis rotation and without averaging over the spin period. Using this model, we demonstrate the emergence of resonances between the nutation and orbital frequencies that act as the primary drivers of the spin dynamics. This analysis reveals that, contrary to long-held belief, Hyperion is not tumbling chaotically. Instead, it lies near or in a nutation-orbit resonance that is first-order in eccentricity, allowing it to rotate quasi-regularly. The most reliable observations are consistent with either nonchaotic motion or chaos that is orders of magnitude smaller than originally claimed. A separate phenomenon, the so-called barrel instability, is shown to be related to a different set of nutation-orbit resonances that generalize the planar spin-orbit resonances. Finally, we show that changes in spin states over long timescales are best understood by considering chaotic diffusion of quasi-conserved quantities.

Gain improvement of conformal circularly polarized Fabry-Perot resonator antenna based on metasurface

Conformal antenna can keep consistent with the shape of the carrier perfectly, which greatly saves the space of the carrier, so it is widely used in military, aerospace and other fields. In this paper, a cylindrical conformal circular polarization Fabry-Perot resonator antenna is designed, and the adverse effect of conformal on antenna gain is overcome by transmission phase compensation. Firstly, a linear to circular polarization conversion metasurface with adjustable transmission phase is designed. The main reason for choosing the metasurface here is to take advantage of its excellent electromagnetic control ability. The metal structures of the metasurface are printed on the ultra-thin dielectric plates, and then attached to the support structure machined by 3D printing, so as to achieve the conformal design of the metasurface. Secondly, the proposed metasurface is used as the superstructure and is combined with a conformal feed to form a cylindrical conformal circularly polarized Fabry Perot resonator antenna. The conformal feed is a patch antenna which is conformal designed in the same way as the metasurface. The conformal feeder is placed under the conformal metasurface to ensure that the electromagnetic wave radiated by the feeder can enter the resonant cavity composed of the feeder and the metasurface. The curvature of the cylindrical conformal of feed and metasurface is the same, which can ensure the high unity of the different positions in the resonator. Next, by adjusting the transmission phase of the unit on the metaurface, the phase compensation of the transmitted electromagnetic wave is realized, so that the electromagnetic wave radiated by the conformal antenna still presents the characteristic of plane wave. Finally, the conformal Fabry-Perot resonator antenna obtains the same high-gain radiation characteristics as the planar resonator antenna. The designed antenna achieves a maximum gain of 13.1dBic at 10 GHz. The size of the antenna is 2.9λ × 2.9λ, so the aperture efficiency is about 19.9 %. The antenna proposed in this paper overcomes the influence of conformal design on the gain of the antenna, so that it can be conformal on the surface of a cylindrical object and obtain better gain characteristics.

Modified sensors open the door to temperature-sensing applications

Changing the design and substrate of a planar resonator adds to its list of uses.

An UHF band planar resonator temperature sensor constructed from high-performance titanium dioxide system microwave dielectric ceramics: Toward integrated ceramic-based sensor devices

With the rapid fusion of temperature sensing technology and microwave technology, microwave temperature sensors have become the protagonist of competing research. We propose a planar resonator temperature sensor that combines substrate material modifications with sensor structure design. To realize this concept, high-performance TiO2-xwt. % ZnO (0 ≤ x ≤ 3) microwave dielectric ceramics are prepared. The various factors influencing dielectric properties, including crystal structure, phase composition, Raman vibration, microstructure, element valence, and oxygen vacancy, are completely investigated. The TiO2-0.7 wt. % ZnO ceramic exhibiting exceptional properties (εr = 106.6, Qf = 46 000 GHz, τf = 426.0 ppm/°C) is selected for substrate fabrication. The frequency and temperature dependence of εr and tan δ are analyzed at 2–4.5 GHz from −50 to 100 °C, revealing a good linearity between εr and temperature. A CSRR temperature sensor employing this substrate material is designed, simulated, fabricated, and validated from −50 to 90 °C. This sensor generates two resonance frequencies (around 0.5 and 1.4 GHz) in the UHF band, demonstrating sensitivities of 2.2 MHz/10 °C and 6.3 MHz/10 °C at the first and second resonance frequencies, along with an outstanding normalized sensitivity of approximately 0.045. Through a comprehensive analysis of the physical mechanisms affecting the sensor's sensitivity and quality factor, the design of the sensor is strengthened from the perspective of optimizing the performance of microwave dielectric ceramics. The regulation mechanism of dielectric characteristics is enriched and clarified, thereby achieving a synergistic improvement in sensor performance. This work expands the application scope of microwave dielectric ceramics and provides an innovative approach to environmental monitoring.

Surrogate-Assisted Differential Evolution for the Design of Multimode Resonator Topology.

The microstrip devices based on multimode resonators represent a class of electromagnetic microwave devices, promising use in tropospheric communication, radar, and navigation systems. The design of wideband bandpass filters, diplexers, and multiplexers with required frequency-selective properties, i.e., bandpass filters, is a complex problem, as electrodynamic modeling is a time-consuming and computationally intensive process. Various planar microstrip resonator topologies can be developed, differing in their topology type, and the search for high-quality structures with unique frequency-selective properties is an important research direction. In this study, we propose an approach for performing an automated search for multimode resonators' conductor topology parameters using a combination of evolutionary computation approach and surrogate modeling. In particular, a variant of differential evolution optimizer is applied, and the model of the target function landscape is built using Gaussian processes. At every iteration of the algorithm, the model is used to search for new high-quality solutions. In addition, a general approach for target function formulation is presented and applied in the proposed approach. The experiments with two microwave filters have demonstrated that the proposed algorithm is capable of solving the problem of tuning two types of topologies, namely three-mode resonators and six-mode resonators, to the required parameters, and the application of surrogated-assisted algorithm has significantly improved overall performance.

Switchable VO₂ Metamaterial Based on Planar and Vertical Split Ring Resonators for High-Performance Sensing

Switchable VO₂ Metamaterial Based on Planar and Vertical Split Ring Resonators for High-Performance Sensing

Wearable Kapton graphene biosensor for detection of toxic gases

Toxic gases cause a significant number of human deaths every year across the globe. Different types of harmful substances can affect individuals in various ways. Inhaling these gases can have harmful consequences for the body, leading to physiological changes or even death. As a preliminary measure, a simulation application is utilized to detect certain gases by utilizing small-scale and flexible architectures, along with advanced detection techniques. The active material used in this study is a patch of emitting graphene embedded on a polyimide film (Kapton), which helps to determine the frequency of the RF Planar Resonant Structure. We plan to utilize the graphene-Kapton sensor for conducting non-invasive testing. The device has been tested for detecting and recognizing various dangerous and toxic gases, including Fluorine azide (F2N), Hydrogen Iodide (HI), Nitrogen (N2), Methane (CH4), and Carbon monoxide (CO). The simulation results suggest that the Graphene-Kapton flexible sensor provides excellent detection performance. The sensor can accurately identify each gas based on its distinct characteristics. Furthermore, ample sensitivity analysis against geometrical parameters and external electrical stimulation is performed to show the robustness and reliability of the proposed structure.

Development and validation of AI-derived segmentation of four-chamber cine cardiac magnetic resonance

BackgroundCardiac magnetic resonance (CMR) in the four-chamber plane offers comprehensive insight into the volumetrics of the heart. We aimed to develop an artificial intelligence (AI) model of time-resolved segmentation using the four-chamber cine.MethodsA fully automated deep learning algorithm was trained using retrospective multicentre and multivendor data of 814 subjects. Validation, reproducibility, and mortality prediction were evaluated on an independent cohort of 101 subjects.ResultsThe mean age of the validation cohort was 54 years, and 66 (65%) were males. Left and right heart parameters demonstrated strong correlations between automated and manual analysis, with a ρ of 0.91−0.98 and 0.89−0.98, respectively, with minimal bias. All AI four-chamber volumetrics in repeatability analysis demonstrated high correlation (ρ = 0.99−1.00) and no bias. Automated four-chamber analysis underestimated both left ventricular (LV) and right ventricular (RV) volumes compared to ground-truth short-axis cine analysis. Two correction factors for LV and RV four-chamber analysis were proposed based on systematic bias. After applying the correction factors, a strong correlation and minimal bias for LV volumetrics were observed. During a mean follow-up period of 6.75 years, 16 patients died. On stepwise multivariable analysis, left atrial ejection fraction demonstrated an independent association with death in both manual (hazard ratio (HR) = 0.96, p = 0.003) and AI analyses (HR = 0.96, p < 0.001).ConclusionFully automated four-chamber CMR is feasible, reproducible, and has the same real-world prognostic value as manual analysis. LV volumes by four-chamber segmentation were comparable to short-axis volumetric assessment.Trials registrationClinicalTrials.gov: NCT05114785.Relevance statementIntegrating fully automated AI in CMR promises to revolutionise clinical cardiac assessment, offering efficient, accurate, and prognostically valuable insights for improved patient care and outcomes.Key points• Four-chamber cine sequences remain one of the most informative acquisitions in CMR examination.• This deep learning-based, time-resolved, fully automated four-chamber volumetric, functional, and deformation analysis solution.• LV and RV were underestimated by four-chamber analysis compared to ground truth short-axis segmentation.• Correction bias for both LV and RV volumes by four-chamber segmentation, minimises the systematic bias.Graphical

Microwave characterization of nanomaterials using planar slot resonator

Nanomaterial characterization using microwaves is needed in nanoscale semiconductor devices, microwave imaging, EM shielding, and wireless communication. Many nanomaterials are used as metallic or dielectric layers in these applications. In this paper, we report the characterization of nanomaterials using planar Microwave Slot Resonator (MSR) which was designed and studied using 3D EM simulation tool. The response of MSR is parameterized which offers a platform to calculate relative permittivity (ε r) and conductivity (σ) from measured high frequency response of nanomaterial loaded MSR. With simplified method, this microwave characterization offers accurate and faster results which be used in design, calculation and numerical analysis of nanomaterial based electronic/optoelectronic devices and sensor/shielding applications.

A high sensitivity planar electric–magnetic isolated sensor for full characterization of magneto-dielectric materials

Magneto-dielectric (MD) materials have received much attention due to their applications in design of high-performance antenna and microwave components. Usually, their permittivity and permeability are key parameters in design of these components. Unfortunately, full characterization of these parameters faces challenge of measurement coupling between permittivity and permeability. To address this issue, an electric and magnetic isolated sensor based on a planar resonance structure is proposed and verified. Several shorting pins are used to separate the electric and magnetic regions, which effectively reduces the measurement coupling between permittivity and permeability. These shorting pins form a magnetic cavity pins (MCP) structure. The resonance structure is used for permittivity measurement, and the MCP structure is designed for measuring permeability with enhanced sensitivity. Moreover, to further improve the quality factor, a metal patch and two 50 Ω chip resistors are integrated on the microstrip line. To extract the imaginary part, the quality factor calculated from S21 will be used. By integrating these techniques, the sensor developed in this paper provides possibility of full characterization of MD materials with high sensitivity. Moreover, the magnetic cavity provides more space than the original design, allowing measurement in the Ultra-Wideband (UWB) range possible. Two sensors are designed and fabricated for validating the sensitivity and accuracy. Several materials with different permittivity and permeability are measured. The extracted measurement values show high agreement with the reference values. The permeability errors for real and imaginary parts are smaller than 3% and 4.5%, respectively. And the permittivity errors are smaller than 2.6% and 6.4%.

Hybrid ultrathin metasurface for broadband sound absorption

To this day, achieving broadband low-frequency sound absorption remains a challenge even with the possibilities promised by the advent of metamaterials and metasurfaces, especially when size and structural restrictions exist. Solving this engineering challenge relies on stringent impedance matching and coupling of the multiple independent local resonators in metasurface absorbers. In this Letter, we present an innovative design approach to broaden the sound absorption bandwidth at low-frequency regime. A hybrid metasurface design is proposed where four coupled planar coiled resonators are also coupled to a well-designed thin planar cavity. This hybrid metasurface creates a broad sound absorption band (130–200 Hz) that is twice as wide as that of the traditional single layer metasurface utilizing four coiled cavities at a deep subwavelength thickness (∼λ/51). This design strategy opens routes toward engineering a class of high-performance thin metasurfaces for ultra-broadband sound absorption, while keeping the planar size unchanged.

Tune optimization for alleviating space charge effects and suppressing beam instability at the RCS of CSNS

The design betatron tune of the Rapid Cycling Synchrotron (RCS) of China Spallation Neutron Source (CSNS) is (4.86, 4.80), which allows for incoherent tune shifts to avoid serious systematic betatron resonances. When the operational bare tune was set at the design value, serious beam instability in the horizontal plane and beam loss induced by half-integer resonance in the vertical plane under space charge detuning were observed. Simulations and experiments have shown that space charge-induced beam loss reduces as the tunes move up and away from half-integer resonance lines. However, experimental observations have shown that instability growth rates increase rapidly as the tune approaches integer from below. The tune requirements for reducing the beam loss caused by space charge effects and suppressing beam instability are different at the RCS of CSNS. The tunes over the whole acceleration process are optimized based on space charge effects and beam instability. The optimized tune pattern was able to well control the beam loss induced by space charge and beam instability. The beam power of CSNS achieved the design value of 100 kW with small beam loss.

Improvement of rejection band with Defected Microstrip Line and Ground plane Resonators

In this paper first a dual band bandstop filter is proposed using a unique spiral defect at the signal plane for Wi-Fi communication and remote sensing applications. The spiral defects is studied, simulated and measured. Next proposed spiral defect is combined with the hexagonal head defected resonators at ground plane to improve the rejection band. In addition a study is also done to observe the effects of the proposed defects at both signal plane and ground plane. A comparison is done among the response of individual defects filters and combined defect filter. It is observed that later shows improved overall bandwidth with compactness. The proposed combined defect filter with improved stopband displays 92.6% FBW and 112.5 dB/GHz sharpness factor with very compact in size as 0.26 λ0 × 0.25 λ0. All measurement results are in good agreement with the simulated results.

Selection of a Surgical Approach for Middle Ear Cholesteatoma Based on the Fusion Images of Non-Echo Planar Diffusion-Weighted MRI and CT.

This study aimed to explore the ability of fusion images of non-echo planar diffusion-weighted magnetic resonance imaging (non-EPI-DWI MRI) and computed tomography (CT) to accurately locate cholesteatoma and plan the surgical approach. In the first part, 41 patients were included. Their CT images and non-EPI DWMRI images were fused. The scope of cholesteatoma in the fusion image was compared with that in the surgical video to evaluate the capability to locate cholesteatoma. A total of 229 patients were included in the second part, and they were divided into 2 groups. We chose the surgical approach for the CT group and the fusion group, and compared the accuracy of surgical approaches in the CT group and the fusion group using the surgical records. The location of cholesteatoma shown in the fusion images was almost identical to that observed during the operation (kappa = .862). The overall specificity and sensitivity of the fusion images in locating cholesteatoma were 94.12% and 93.06%, respectively. The accuracy of surgical approach selection based on the fusion images (99.02%) was higher than that of surgical approach selection based on the CT images (85.83%). It is recommended that the fusion images be used to locate the range of the cholesteatoma before operation.

Efficient second harmonic generation in a high-Q Fabry-Perot microresonator on x-cut thin film lithium niobate.

Microresonators facilitate enhanced light-matter interactions within a limited space, showing great promise for nonlinear optics. Here, we demonstrate a high-quality (Q) factor Fabry-Perot microresonator (FPR) for second harmonic generation (SHG) on an x-cut thin film lithium niobate (TFLN) platform. The FPR exhibits Q factors of Qpump = 1.09 × 105 and QSH = 1.15 × 104 at the 1560 nm pump wavelength and 780 nm second harmonic wavelength, respectively. Under low pump power, a normalized SHG efficiency of 158.5 ± 18.5%/W is attained. We experimentally verify that increased temperatures mitigate photorefractive effects that degrade SHG performance. This work highlights the immense capabilities of one-dimensional planar optical waveguide resonators for efficient on-chip nonlinear wavelength conversion.

High-Q Ku-band Microstrip Spiral Resonator in Fan-out Wafer-Level Packaging (FoWLP) Technology for VCO Applications

In this paper, a planar spiral resonator operating at 13 GHz is investigated. The resonator was fabricated using fan-out wafer level packaging (FoWLP) technology. The field analysis highlights the importance of via fence. Two thick film resistors suppress an undesired resonance in proximity of targeted one. The measurements demonstrate a very good correlation in comparison with full-wave simulations. The measured Q-factor defined based on analysis of feedback oscillatory system is about 48. The proposed configuration is suitable for voltage-controlled oscillators (VCOs) with a resonator realized in package.

Planar Bilayer PT-Symmetric Systems and Resonance Energy Transfer

Parity-time (PT) symmetry provides an outstanding improvement of photonic devices’ performance due to the remarkable physics behind it. Resonance energy transfer (RET) as an important characteristic mediating the molecules that can be tailored in the PT-symmetric environment, too. We study how planar bilayer PT-symmetric systems affect the process of resonance energy transfer occurring in the vicinity thereof. First, we investigate the reflectance and transmittance spectra of such systems by calculating reflection and transmission coefficients as well as total radiation amplification as functions of medium parameters. We obtain that reflectance and total amplification are greatest near the exceptional points of the PT-symmetric system. Then, we perform numerical calculations of the RET rate and investigate its dependence on the complex permittivity of the PT-symmetric medium, dipole orientation, frequency of radiation and layer thickness. Optically thick PT-symmetric systems may operate at lower gain at the expense of the appearance of chaotic-like behaviors. These appear owing to the dense oscillations in the reflectance and transmittance spectra and vividly manifest themselves as stochastic-like positions of the exceptional points for PT-symmetric bilayers. The RET rate, being a result of the field interference, can be significantly amplified and suppressed near exceptional points exhibiting a Fano-like lineshape.

Low-loss millimeter-wave resonators with an improved coupling structure

Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave signals to 2D structures. We develop and characterize a tapered transition structure coupling a rectangular waveguide to a planar slotline waveguide with better than 0.5 dB efficiency over 14 GHz, and use it to measure ground-shielded resonators in the W band (75–110 GHz). Having decoupled the resonators from radiative losses, we consistently achieve single-photon quality factors above 105, with a two-level-system loss limit above 106, and verify the effectiveness of oxide removal treatments to reduce loss. These values are 4–5 times higher than those previously reported in the W band, and much closer to typical planar microwave resonators. The improved losses demonstrated by these on-chip millimeter-wave devices shed new light on quantum decoherence in a different frequency regime, offer increased selectivity for high-frequency detectors, and enables new possibilities for hybrid quantum experiments integrating millimeter-wave frequencies.

Sculpting ultrastrong light-matter coupling through spatial matter structuring.

The central theme of cavity quantum electrodynamics is the coupling of a single optical mode with a single matter excitation, leading to a doublet of cavity polaritons which govern the optical properties of the coupled structure. Especially in the ultrastrong coupling regime, where the ratio of the vacuum Rabi frequency and the quasi-resonant carrier frequency of light, ΩR/ω c, approaches unity, the polariton doublet bridges a large spectral bandwidth 2ΩR, and further interactions with off-resonant light and matter modes may occur. The resulting multi-mode coupling has recently attracted attention owing to the additional degrees of freedom for designing light-matter coupled resonances, despite added complexity. Here, we experimentally implement a novel strategy to sculpt ultrastrong multi-mode coupling by tailoring the spatial overlap of multiple modes of planar metallic THz resonators and the cyclotron resonances of Landau-quantized two-dimensional electrons, on subwavelength scales. We show that similarly to the selection rules of classical optics, this allows us to suppress or enhance certain coupling pathways and to control the number of light-matter coupled modes, their octave-spanning frequency spectra, and their response to magnetic tuning. This offers novel pathways for controlling dissipation, tailoring quantum light sources, nonlinearities, correlations as well as entanglement in quantum information processing.

MAGNETIC CORE APPLICATION IN A PLANAR RESONATOR WITH A YTTRIUM IRON GARNET FILM FOR ENHANCING STRONG PHOTON-MAGNON COUPLING

Subject and Purpose. This paper presents numerical simulation results on the transmission spectra of a split-ring resonator (SRR) loaded with a thin film of yttrium iron garnet (YIG). The application of a magnetic core in the SRR is proposed for increasing the photon-magnon (P-M) coupling strength. The anticrossing effect in the frequency dispersion behavior of the SRR modes and YIG film ferromagnetic resonance modes, namely SRR-YIG coupled modes, is identified. The dimensional parameters of the SRR with a magnetic core are calculated, taking care to preserve the design compactness and striving to obtain a maximum possible spin-number-normalized coupling strength for such a system. The work has been aimed at evaluating the efficiency of applying the magnetic core as a part of the planar microwave resonator to enhance the P-M coupling strength. Methods and Methodology. The transmission coefficient |S21| spectra of electromagnetic waves propagating through the planar resonator with the YIG film under the ferromagnetic resonance condition are numerically studied using the CST Studio Suite package in the frequency domain. The spatial distribution function of the magnetic field strength is calculated for the two scenarios of YIG film location: near the magnetic core (between the SRR and the feeding stripline) and inside the magnetic core (in the SRR center). Also, for each of these two scenarios, the transmission coefficient |S21| spectra of the wave propagation through the feeding stripline in the region of SRR-YIG coupled modes are simulated with and without the magnetic core. The dispersion curves of the SRR-YIG coupled modes are obtained in analytical terms. Results. It has been shown that the magnetic core application increases the P-M coupling strength 2.0 times in the scenario of YIG film location near the magnetic core (between the SRR and the feeding stripline). When the YIG film is inside the magnetic core (in the SRR center), the P-M coupling strength rises 2.3 times compared to similar cases without the magnetic core. Conclusions. The suggested magnetic core application can be used to increase the P-M coupling strength in the SRR — magnetic film resonant system, striving to develop effective microwave-to-optical converters and create efficient information exchange between quantum computers.