Plains Elevated Convection At Night Research Articles

Improving the Representation of Hail in the Thompson Microphysics Scheme

Abstract Methods to improve the representation of hail in the Thompson–Eidhammer microphysics scheme are explored. A new two-moment and predicted density graupel category is implemented into the Thompson–Eidhammer scheme. Additionally, the one-moment graupel category’s intercept parameter is modified, based on hail observations, to shift the properties of the graupel category to become more hail-like since the category is designed to represent both graupel and hail. Finally, methods to diagnose maximum expected hail size at the surface and aloft are implemented. The original Thompson–Eidhammer version, the newly implemented two-moment and predicted density graupel version, and the modified (to be more hail-like) one-moment version are evaluated using a case that occurred during the Plains Elevated Convection at Night (PECAN) field campaign, during which hail-producing storms merged into a strong mesoscale convective system. The three versions of the scheme are evaluated for their ability to predict hail sizes compared to observed hail sizes from storm reports and estimated from radar, their ability to predict radar reflectivity signatures at various altitudes, and their ability to predict cold-pool features like temperature and wind speed. One key benefit of using the two-moment and predicted density graupel category is that the simulated reflectivity values in the upper levels of discrete storms are clearly improved. This improvement coincides with a significant reduction in the areal extent of graupel aloft, also seen when using the updated one-moment scheme. The two-moment and predicted density graupel scheme is also better able to predict a wide variety of hail sizes at the surface, including large (>2-in. diameter) hail that was observed during this case.

Sensitivity of Precipitation Displacement of a Simulated MCS to Changes in Land Surface Conditions

AbstractThis study investigates the role of the land surface on the precipitation produced by an elevated mesoscale convective system (MCS) in Iowa between 24–25 June 2015 during the Plains Elevated Convection at Night (PECAN) field campaign. Previous studies have shown a strong effect of low‐level atmospheric moisture on the location of this MCS. A series of semi‐idealized and realistic simulations with irrigation are conducted to understand the effect of moisture perturbations on the MCS precipitation displacement. In general, numerical simulations place the MCS east of the observed location. Adding moisture directly in the low‐level atmosphere in the semi‐idealized experiments reduces this displacement error. However, experiments with perturbed soil moisture result in drying over Iowa induced by moisture flux divergence from cooler low‐level temperatures and higher surface pressure, causing the MCS to move further to the east. The irrigation impact on low‐level moisture is highly dependent on the length of simulation period. Shorter simulations on the order of days generate similar drying over Iowa but the opposite is found for month‐long simulations. Despite the lack of low‐level moistening in the perturbed soil moisture and short‐term irrigation experiments, the sensitivity to low‐level moisture is similar in all runs. More low‐level moisture generates a more convectively unstable environment with less inhibition and a lower level of free convection that leads to more rapid MCS development and a change in MCS location.

Impacts of Methods for Estimating the Observation Error Variance for the Frequent Assimilation of Thermodynamic Profilers on Convective-Scale Forecasts

Abstract The observation error covariance partially controls the weight assigned to an observation during data assimilation (DA). True observation error statistics are rarely known and likely vary depending on the meteorological state. However, operational DA systems often apply static methods that assign constant observation errors across a dataset. Previous studies show that these methods can degrade forecast quality when assimilating ground-based remote sensing datasets. To improve the impact of assimilating such observations, we propose two novel methods for estimating the observation error variance for high-frequency thermodynamic profilers. These methods include an adaptive observation error inflation technique and the Desroziers method that directly estimates the observation error variances using paired innovation and analysis residuals. Each method is compared for a nocturnal mesoscale convective system (MCS) observed during the Plains Elevated Convection at Night (PECAN) experiment. In general, we find that these novel methods better represent the large variability of observation error statistics for high-frequency profiles collected by Atmospheric Emitted Radiance Interferometers (AERIs). When assimilating AERIs by statically inflating retrieval error variances, the trailing stratiform region of the MCS is degraded compared to a baseline simulation with no AERI data assimilated. Assimilating the AERIs using the adaptive inflation or Desroziers method results in better maintenance of the trailing stratiform region and additional suppression of spurious convection. The forecast improvements from these novel methods are primarily linked to increased error variances for some moisture retrievals. These results indicate the importance of accurately estimating observation error statistics for convective-scale DA and suggest that accounting for flow dependence can improve the impacts from assimilating remote sensing datasets.

An OSSE Study of the Impact of Micropulse Differential Absorption Lidar (MPD) Water Vapor Profiles on Convective Weather Forecasting

Abstract The National Center for Atmospheric Research (NCAR) and Montana State University jointly developed water vapor micropulse differential absorption lidars (MPDs) that are a significant advance in eye-safe, unattended, lidar-based water vapor remote sensing. MPD is designed to provide continuous vertical water vapor profiles with high vertical (150 m) and temporal resolution (5 min) in the lower troposphere. This study aims to investigate MPD observation impacts and the scientific significance of MPDs for convective weather analyses and predictions using observation system simulation experiments (OSSEs). In this study, the Data Assimilation Research Testbed (DART) and the Advanced Research version of the Weather Research and Forecasting (WRF-ARW) Model are used to conduct OSSEs for a case study of a mesoscale convective system (MCS) observed during the Plains Elevated Convection At Night (PECAN) experiment. A poor-performing control simulation that was drawn from a 40-member ensemble at 3-km resolution is markedly improved by assimilation of simulated observations drawn from a more skillful simulation that served as the nature run at 1-km resolution. In particular, assimilating surface observations corrected surface warm front structure errors, while MPD observations remedied errors in low- to midlevel moisture ahead of the MCS. Collectively, these analyses changes led to markedly improved short-term predictions of convection initiation, evolution, and precipitation of the MCS in the simulations on 15 July 2015. For this case study, the OSSE results indicate that a more dense MPD network results in better prediction performance for convective precipitation while degrading light precipitation prediction performance due to an imbalance of the analysis at large scales.

The value of assimilating different ground-based profiling networks on the forecasts of bore-generating nocturnal convection

AbstractThere is a growing interest in the use of ground-based remote sensors for Numerical Weather Prediction (NWP), which is sparked by their potential to address the currently existing observation gap within the Planetary Boundary Layer (PBL). Nevertheless, open questions still exist regarding the relative importance of and synergy among various instrument types. To shed light on these important questions, the present study examines the forecast benefits associated with several different ground-based profiling networks using 10 diverse cases from the Plains Elevated Convection at Night (PECAN) field campaign. Aggregated verification statistics reveal that a combination of in situ and remote sensing profilers leads to the largest increase in forecast skill, both in terms of the parent mesoscale convective system and the explicitly resolved bore. These statistics also indicate that it is often advantageous to collocate thermodynamic and kinematic remote sensors. By contrast, the impacts of networks consisting of single profilers appear to be flow-dependent, with thermodynamic (kinematic) remote sensors being most useful in cases with relatively low (high) convective predictability. Deficiencies in the data assimilation method as well as inherent complexities in the governing moisture dynamics are two factors shown to limit the forecast value extracted from such networks.

Polarimetric Size Sorting Signatures in the Convective Regions of Mesoscale Convective Systems in PECAN: Implications on Kinematics, Thermodynamics, and Precipitation Pathways

An object-based technique was utilized to identify hydrometeor size-sorting signatures at lower levels in the convective regions of 10 mesoscale convective systems (MCSs) during the 2015 Plains Elevated Convection at Night (PECAN) field campaign. Composite statistical analysis indicates that the magnitudes of size-sorting signatures (the separation distances between rain diameter maxima and concentration maxima) are nonlinearly correlated to the echo-top height, rain mass beneath the melting level, and precipitation rates at higher percentiles. To explore this correlation, the weather forecasting and research model was used to simulate the 20 June 2015 MCS during PECAN. Statistical analysis of the model outputs indicates more active riming growth and quicker graupel fallout at warmer temperatures near areas with larger separation distances. While updraft intensity above the melting level was also positively correlated to separation distances, this correlation was only statistically significant within certain temperature ranges. Additional analyses reveal that the higher intense precipitation potential near signatures with large separation distances could be attributed to precipitation production from the melted graupel. Finally, spatial correspondence between graupel distribution at the melting level and rain distribution at the lowest model level illustrates the critical role of graupel sedimentation and sorting in creating size-sorting signatures in MCSs during the PECAN field experiment.

Convection Initiation and Bore Formation Following the Collision of Mesoscale Boundaries over a Developing Stable Boundary Layer: A Case Study from PECAN

AbstractThis observational study documents the consequences of a collision between two converging shallow atmospheric boundaries over the central Great Plains on the evening of 7 June 2015. This study uses data from a profiling airborne Raman lidar [the compact Raman lidar (CRL)] and other airborne and ground-based data collected during the Plains Elevated Convection at Night (PECAN) field campaign to investigate the collision between a weak cold front and the outflow from an MCS. The collision between these boundaries led to the lofting of high-CAPE, low-CIN air, resulting in deep convection, as well as an undular bore. Both boundaries behaved as density currents prior to collision. Because the MCS outflow boundary was denser and less deep than the cold-frontal air mass, the bore propagated over the latter. This bore was tracked by the CRL for about 3 h as it traveled north over the shallow cold-frontal surface and evolved into a soliton. This case study is unique by using the high temporal and spatial resolution of airborne Raman lidar measurements to describe the thermodynamic structure of interacting boundaries and a resulting bore.

Self-Organization and Maintenance of Simulated Nocturnal Convective Systems from PECAN

AbstractThe Plains Elevated Convection at Night (PECAN) field project was designed to explain the evolution and structures of nocturnal mesoscale convective systems (MCSs) and relate them to specific mechanisms and environmental ingredients. The present work examines four of the strongest and best-organized PECAN cases, each numerically simulated at two different levels of complexity. The suite of simulations enables a longitudinal look at how nocturnal MCSs resemble (or differ from) more commonly studied diurnal MCSs. All of the simulations produce at least some surface outflow (“cold pools”), with stronger outflows occurring in environments with more CAPE and weaker near-ground stability. As these surface outflows emerge, the lifting of near-ground air occurs, causing each simulated nocturnal MCS to ultimately become “surface-based.” The end result in each simulation is a quasi-linear convective system (QLCS) that is most intense toward the downshear flank of its cold pool, with the classical appearance of many afternoon squall lines. This pathway of evolution occurs both in fully heterogeneous real-world-like simulations and horizontally homogeneous idealized simulations. One of the studied cases also exhibits a back-building “rearward off-boundary development” stage, and this more complex behavior is also well simulated in both model configurations. As a group, the simulations imply that a wide range of nocturnal MCS behaviors may be self-organized (i.e., not reliant on larger-scale features external to the convection).

Urbanization-Induced Land and Aerosol Impacts on Storm Propagation and Hail Characteristics

AbstractChanges in land surface and aerosol characteristics from urbanization can affect dynamic and microphysical properties of severe storms, thus affecting hazardous weather events resulting from these storms such as hail and tornadoes. We examine the joint and individual effects of urban land and anthropogenic aerosols of Kansas City on a severe convective storm observed during the 2015 Plains Elevated Convection At Night (PECAN) field campaign, focusing on storm evolution, convective intensity, and hail characteristics. The simulations are carried out at the cloud-resolving scale (1 km) using a version of WRF-Chem in which the spectral-bin microphysics (SBM) is coupled with the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC). It is found that the urban land effect of Kansas City initiated a much stronger convective cell and the storm got further intensified when interacting with stronger turbulence induced by the urban land. The urban land effect also changed the storm path by diverting the storm toward the city, mainly resulting from enhanced urban land-induced convergence in the urban area and around the urban–rural boundaries. The joint effect of urban land and anthropogenic aerosols enhances occurrences of both severe hail and significant severe hail by ~20% by enhancing hail formation and growth from riming. Overall the urban land effect on convective intensity and hail is relatively larger than the anthropogenic aerosol effect, but the joint effect is more notable than either of the individual effects, emphasizing the importance of considering both effects in evaluating urbanization effects.

Assimilation of lidar planetary boundary layer height observations

Abstract. Lidar backscatter and wind retrievals of the planetary boundary layer height (PBLH) are assimilated into 22-hourly forecasts from the NASA Unified – Weather and Research Forecast (NU-WRF) model during the Plains Elevated Convection at Night (PECAN) campaign on 11 July 2015 in Greensburg, Kansas, using error statistics collected from the model profiles to compute the necessary covariance matrices. Two separate forecast runs using different PBL physics schemes were employed, and comparisons with six independent radiosonde profiles were made for each run. Both of the forecast runs accurately predicted the PBLH and the state variable profiles within the planetary boundary layer during the early morning, and the assimilation had a small impact during this time. In the late afternoon, the forecast runs showed decreased accuracy as the convective boundary layer developed. However, assimilation of the Doppler lidar PBLH observations was found to improve the temperature and V-velocity profiles relative to independent radiosonde profiles. Water vapor was overcorrected, leading to increased differences with independent data. Errors in the U velocity were made slightly larger. The computed forecast error covariances between the PBLH and state variables were found to rise in the late afternoon, leading to the larger improvements in the afternoon. This work represents the first effort to assimilate PBLH into forecast states using ensemble methods.

Lidar Observations of a Mesoscale Moisture Transport Event Impacting Convection and Comparison to Rapid Refresh Model Analysis

AbstractThe 2015 Plains Elevated Convection at Night (PECAN) field campaign provided a wealth of intensive observations for improving understanding of interplay between the Great Plains low-level jet (LLJ), mesoscale convective systems (MCSs), and other phenomena in the nocturnal boundary layer. This case study utilizes PECAN ground-based Doppler and water vapor lidar and airborne water vapor lidar observations for a detailed examination of water vapor transport in the Great Plains. The chosen case, 11 July 2015, featured a strong LLJ that helped sustain an MCS overnight. The lidars resolved boundary layer moisture being transported northward, leading to a large increase in water vapor in the lowest several hundred meters above the surface in northern Kansas. A branch of nocturnal convection initiated coincident with the observed maximum water vapor flux. Radiosondes confirmed an increase in convective potential within the LLJ layer. Moist static energy (MSE) growth was generated by increasing moisture in spite of a temperature decrease in the LLJ layer. This unique dataset is also used to evaluate the Rapid Refresh (RAP) analysis model performance, comparing model output against the continuous lidar profiles of water vapor and wind. While the RAP analysis captured the large-scale trends, errors in water vapor mixing ratio were found ranging from 0 to 2 g kg−1 at the ground-based lidar sites. Comparison with the airborne lidar throughout the PECAN domain yielded an RMSE of 1.14 g kg−1 in the planetary boundary layer. These errors mostly manifested as contiguous dry or wet regions spanning spatial scales on the order of ten to hundreds of kilometers.

Systematic Evaluation of the Impact of Assimilating a Network of Ground-Based Remote Sensing Profilers for Forecasts of Nocturnal Convection Initiation during PECAN

AbstractNocturnal convection is often initiated by mechanisms that cannot be easily observed within the large gaps between rawinsondes or by conventional surface networks. To improve forecasts of such events, we evaluate the systematic impact of assimilating a collocated network of high-frequency, ground-based thermodynamic and kinematic profilers collected as part of the 2015 Plains Elevated Convection At Night (PECAN) experiment. For 13 nocturnal convection initiation (CI) events, we find small but consistent improvements when assimilating thermodynamic observations collected by Atmospheric Emitted Radiance Interferometers (AERIs). Through midlevel cooling and moistening, assimilating the AERIs increases the fractions skill score (FSS) for both nocturnal CI and precipitation forecasts. The AERIs also improve various contingency metrics for CI forecasts. Assimilating composite kinematic datasets collected by Doppler lidars and radar wind profilers (RWPs) results in slight degradations to the forecast quality, including decreases in the FSS and traditional contingency metrics. The impacts from assimilating thermodynamic and kinematic profilers often counteract each other, such that we find little impact on the detection of CI when both are assimilated. However, assimilating both datasets improves various properties of the CI events that are successfully detected (timing, distance, shape, etc.). We also find large variability in the impact of assimilating these remote sensing profilers, likely due to the number of observing sites and the strength of the synoptic forcing for each case. We hypothesize that the lack of flow-dependent methods to diagnose observation errors likely contributes to degradations in forecast skill for many cases, especially when assimilating kinematic profilers.

Estimating the Maximum Vertical Velocity at the Leading Edge of a Density Current

AbstractThe maximum upward vertical velocity at the leading edge of a density current is commonly <10 m s−1. Studies of the vertical velocity, however, are relatively few, in part owing to the dearth of high-spatiotemporal-resolution observations. During the Plains Elevated Convection At Night (PECAN) field project, a mobile Doppler lidar measured a maximum vertical velocity of 13 m s−1 at the leading edge of a density current created by a mesoscale convective system during the night of 15 July 2015. Two other vertically pointing instruments recorded 8 m s−1 vertical velocities at the leading edge of the density current on the same night. This study describes the structure of the density current and attempts to estimate the maximum vertical velocity at their leading edges using the following properties: the density current depth, the slope of its head, and its perturbation potential temperature. The method is then be applied to estimate the maximum vertical velocity at the leading edge of density currents using idealized numerical simulations conducted in neutral and stable atmospheres with resting base states and in neutral and stable atmospheres with vertical wind shear. After testing this method on idealized simulations, this method is then used to estimate the vertical velocity at the leading edge of density currents documented in several previous studies. It was found that the maximum vertical velocity can be estimated to within 10%–15% of the observed or simulated maximum vertical velocity and indirectly accounts for parameters including environmental wind shear and static stability.

Analysis of Back-Building Convection in Simulations with a Strong Low-Level Stable Layer

Abstract In a mesoscale convective system (MCS), convection that redevelops over (i.e., back-builds), and/or repeatedly passes over (i.e., trains) a region for an extended period of time can contribute to extreme rainfall and flash flooding. Past studies have indicated that both mesoscale ascent and lifting of the inflow layer by a cold pool or bore are important when this back-building/training convection is displaced from the leading line [sometimes called rearward off-boundary development (ROD)]. However, Plains Elevated Convection At Night (PECAN) field campaign observations suggest that the stability of the nocturnal boundary layer is highly variable and some MCSs with ROD have only a weak surface cold pool. Numerical simulations presented in this study suggest that in an environment with strong boundary layer stability, ROD can be supported by mechanisms other than those mentioned above. Simulations were initialized using a sounding from ahead of a PECAN MCS with a strong stable layer and ROD, and the three-dimensional simulation produced an MCS similar to that observed despite the homogeneous initial conditions. Some of the findings presented herein challenge existing understanding of nocturnal MCSs, and especially how downdrafts interact with a stable boundary layer. Notably, downdrafts can reach the surface, and different regions of the MCS may have different propagation mechanisms and different relevant inflow layers. Unlike previous studies of ROD, parcel lifting may be supported by an intrusion (an elevated layer of downdraft air) modified by the three-dimensional vertical wind shear.

Composite In Situ Microphysical Analysis of All Spiral Vertical Profiles Executed within BAMEX and PECAN Mesoscale Convective Systems

AbstractVertical profiles of temperature, relative humidity, cloud particle concentration, median mass dimension, and mass content were derived using instruments on the NOAA P-3 aircraft for 37 spiral ascents/descents flown within five mesoscale convective systems (MCSs) during the 2015 Plains Elevated Convection at Night (PECAN) project, and 16 spiral descents of the NOAA P-3 within 10 MCSs during the 2003 Bow Echo and Mesoscale Convective Vortex Experiment (BAMEX). The statistical distribution of thermodynamic and microphysical properties within these spirals is presented in context of three primary MCS regions—the transition zone (TZ), enhanced stratiform rain region (ESR), and the anvil region (AR)—allowing deductions concerning the relative importance and nature of microphysical processes in each region. Aggregation was ubiquitous across all MCS zones at subfreezing temperatures, where the degree of ambient subsaturation, if present, moderated the effectiveness of this process via sublimation. The predominately ice-supersaturated ESR experienced the least impact of sublimation on microphysical characteristics relative to the TZ and AR. Aggregation was most limited by sublimation in the ice-subsaturated AR, where total particle number and mass concentrations decreased most rapidly with increasing temperature. Sublimation cooling at the surface of ice particles in the TZ, the driest of the three regions, allowed ice to survive to temperatures as high as +6.8°C. Two spirals executed behind a frontal squall line exhibited a high incidence of pristine ice crystals, and notably different characteristics from most other spirals. Gradual meso- to synoptic-scale ascent in this region likely contributed to the observed differences.

Spatiotemporal Evolution of the Microphysical and Thermodynamic Characteristics of the 20 June 2015 PECAN MCS

Abstract This study examines microphysical and thermodynamic characteristics of the 20 June 2015 mesoscale convective system (MCS) observed during the Plains Elevated Convection At Night (PECAN) experiment, specifically within the transition zone (TZ), enhanced stratiform rain region (ESR), anvil region, melting layer (ML), and the rear inflow jet (RIJ). Analyses are developed from airborne optical array probe data and multiple-Doppler wind and reflectivity syntheses using data from the airborne NOAA Tail Doppler Radar (TDR) and ground-based Weather Surveillance Radar-1988 Doppler (WSR-88D) radars. Seven spiral ascents/descents of the NOAA P-3 aircraft were executed within various regions of the 20 June MCS. Aggregation modified by sublimation was observed in each MCS region, regardless of whether the sampling was within the RIJ. Sustained sublimation and evaporation of precipitation in subsaturated layers led to a trend of downward moistening across the ESR spirals, with greater degrees of subsaturation maintained when in the vicinity of the descending RIJ. In all cases where melting was observed, the ML acted as a prominent thermodynamic boundary, with differing rates of change in temperature and relative humidity above and below the ML. Two spiral profiles coincident with the rear inflow notch provided unique observations within the TZ and were interpreted in the context of similar observations from the 29 June 2003 Bow Echo and Mesoscale Convective Vortex Experiment MCS. There, sublimation cooling and enhanced descent within the RIJ allowed ice particles to survive to temperatures as warm as +6.8°C before completely sublimating/evaporating.

Observations and Simulation of Elevated Nocturnal Convection Initiation on 24 June 2015 during PECAN

Abstract The environment of elevated nocturnal deep convection initiation (CI) on 24 June 2015 is investigated using radiosonde data from the Plains Elevated Convection at Night (PECAN) field experiment and a convection-allowing simulation. Elevated CI occurs around midnight in ascending westerly flow above the northeastern terminus of the nocturnal low-level jet (LLJ) several hundred kilometers poleward of the leading edge of a surface warm front. This CI originates from within preexisting banded altocumulus clouds that are supported by persistent large-scale ascent within the entrance region of a midtropospheric jet streak. Model trajectories calculated backward from convective updraft cores during CI indicate abrupt lifting at the leading edge of the surface front during the late afternoon to altitudes above that of the subsequent southerly LLJ. This air remains significantly subsaturated during northward movement until after several hours of weaker but persistent ascent within the highly elevated westerly airstream during the evening. Unlike in many previous studies of frontal overrunning by the LLJ, strong local drying occurs within the LLJ core. Nevertheless, vertical displacements from persistent mesoscale ascent were sufficient for trajectory air parcels to reach their LFC and sustain deep convection. The mesoscale upward displacement along trajectories is well explained by isentropic upglide associated with frontal overrunning at horizontal distances greater than 100 km from the CI and subsequent mature convection. However, the significant additional mesoscale vertical displacements needed for deep CI to occur in the westerlies above the horizontally convergent ~100-km-wide LLJ terminus region, were associated with local cooling and are not accounted for by steady isentropic upglide.

Seven-Doppler Radar and In Situ Analysis of the 25–26 June 2015 Kansas MCS during PECAN

AbstractThis case study analyzes a nocturnal mesoscale convective system (MCS) that was observed on 25–26 June 2015 in northeastern Kansas during the Plains Elevated Convection At Night (PECAN) project. Over the course of the observational period, a broken line of elevated nocturnal convective cells initiated around 0230 UTC on the cool side of a stationary front and subsequently merged to form a quasi-linear MCS that later developed strong, surface-based outflow and a trailing stratiform region. This study combines radar observations with mobile and fixed mesonet and sounding data taken during PECAN to analyze the kinematics and thermodynamics of the MCS from 0300 to 0630 UTC. This study is unique in that 38 consecutive multi-Doppler wind analyses are examined over the 3.5 h observation period, facilitating a long-duration analysis of the kinematic evolution of the nocturnal MCS. Radar analyses reveal that the initial convective cells and linear MCS are elevated and sustained by an elevated residual layer formed via weak ascent over the stationary front. During upscale growth, individual convective cells develop storm-scale cold pools due to pockets of descending rear-to-front flow that are measured by mobile mesonets. By 0500 UTC, kinematic analysis and mesonet observations show that the MCS has a surface-based cold pool and that convective line updrafts are ingesting parcels from below the stable layer. In this environment, the elevated system has become surface based since the cold pool lifting is sufficient for surface-based parcels to overcome the CIN associated with the frontal stable layer.

Simulated Evolution and Severe Wind Production by the 25–26 June 2015 Nocturnal MCS from PECAN

AbstractThe 25–26 June 2015 nocturnal mesoscale convective system (MCS) from the Plains Elevated Convection at Night (PECAN) field project produced severe winds within an environment that might customarily be associated with elevated convection. This work incorporates both a full-physics real-world simulation and an idealized single-sounding simulation to explore the MCS’s evolution. Initially, the simulated convective systems were elevated, being maintained by wavelike disturbances and lacking surface cold pools. As the systems matured, surface outflows began to appear, particularly where heavy precipitation was occurring, with air in the surface cold pools originating from up to 4–5 km AGL. Via this progression, the MCSs exhibited a degree of self-organization (i.e., structures that are dependent upon an MCS’s particular history). The cold pools eventually became 1.5–3.5 km deep, by which point passive tracers revealed that the convection was at least partly surface based. Soon after becoming surface based, both simulations produced severe surface winds, the strongest of which were associated with embedded low-level mesovortices and their attendant outflow surges and bowing segments. The origin of the simulated mesovortices was likely the downward tilting of system-generated horizontal vorticity (from baroclinity, but also possibly friction) within the simulated MCSs’ outflow, as has been argued in a number of previous studies. Taken altogether, it appears that severe nocturnal MCSs may often resemble their cold pool-driven, surface-based afternoon counterparts.

Wave Disturbances and Their Role in the Maintenance, Structure, and Evolution of a Mesoscale Convection System

AbstractThis study investigates a nocturnal mesoscale convective system (MCS) observed during the Plains Elevated Convection At Night (PECAN) field campaign. A series of wavelike features were observed ahead of this MCS with extensive convective initiation (CI) taking place in the wake of one of these disturbances. Simulations with the WRF-ARW Model were utilized to understand the dynamics of these disturbances and their impact on the MCS. In these simulations, an “elevated bore” formed within an inversion layer aloft in response to the layer being lifted by air flowing up and over the cold pool. As the bore propagated ahead of the MCS, the lifting created an environment more conducive to deep convection allowing the MCS to discretely propagate due to CI in the bore’s wake. The Scorer parameter was somewhat favorable for trapping of this wave energy, although aspects of the environment evolved to be consistent with the expectations for an n = 2 mode deep tropospheric gravity wave. A bore within an inversion layer aloft is reminiscent of disturbances predicted by two-layer hydraulic theory, contrasting with recent studies that suggest bores are frequently initiated by the interaction between the flow within stable nocturnal boundary layer and convectively generated cold pools. Idealized simulations that expand upon this two-layer approach with orography and a well-mixed layer below the inversion suggest that elevated bores provide a possible mechanism for daytime squall lines to remove the capping inversion often found over the Great Plains, particularly in synoptically disturbed environments where vertical shear could create a favorable trapping of wave energy.