Placement Of Wind Turbines Research Articles

Higher Onshore Wind Energy Potentials Revealed by Kilometer‐Scale Atmospheric Modeling

AbstractReliable and highly resolved information about onshore wind energy potential (WEP) is essential for expanding renewable energy to eventually achieve carbon neutrality. In this pilot study, simulated 60 m wind speeds (ws60m) from a km‐scale, convection‐permitting 3.3 km‐resolution ICON‐LAM simulation and often‐used 31 km‐resolution ERA5 reanalysis are evaluated at 18 weather masts. The estimated ICON‐LAM and ERA5 WEPs are then compared using an innovative approach with 1.8 million eligible wind turbine placements over southern Africa. Results show ERA5 underestimates ws60m with a Mean Error (ME) of −1.8 m s−1 (−27%). In contrast, ICON‐LAM shows a ME of −0.1 m s−1 (−1.8%), resulting in a much higher average WEP by 48% compared to ERA5. A combined Global Wind Atlas‐ERA5 product reduces the ws60m underestimation of ERA5 to −0.3 m s−1 (−4.7%), but shows a similar average WEP compared to ERA5 resulting from the WEP spatial heterogeneity.

Multi-objective Mathematical Model for Optimal Wind Turbine Placement in Wind Farm under Uncertainty

The main objective of this research is to introduce three energy risk management models grounded in optimization techniques for the strategic placement of wind turbines, considering wake effects and uncertainties in wind speed and direction. For this purpose, wind speed and direction data are gathered, and Monte Carlo simulation is employed to model the uncertainties. Subsequently, the risk management models undergo optimization using Non-Dominated Sorting Genetic Algorithm II (NSGA-II), Pareto envelope-based selection algorithm II (PESA-II), and Multi-Objective Particle Swarm Optimization (MOPSO) algorithms. Findings reveal that the wind farm's maximum power output reaches approximately 5.8 megawatts across all three algorithms and optimal turbine placements. A risk assessment was conducted using a tenth percentile criterion, revealing a significant production risk within the study area, with production falling below 1.8 megawatts in 90% of cases. Regarding the performance evaluation of the algorithms across all three models, superior performance in terms of solution proximity to the ideal solution is exhibited by PESA-II, while enhanced diversity and solution spread compared to the other algorithms are demonstrated by NSGA-II.

Using Wind Energy to Carry out Basketball Special Physical Fitness Training—Calculation and Research on Aerodynamic Efficiency of Integrated Wind Turbine in Stadiums and Gymnasiums

This study investigates the feasibility of using wind energy for basketball special physical fitness training by combining wind turbines in stadiums and gyms. The investigation focuses on measuring the aerodynamic efficiencies of the combined wind turbine systems. It starts with an analysis of wind energy utilization for fitness training, which signifies the potential benefit of harnessing the renewable energy in sports facilities. The investigation into the aerodynamic efficiency of the combined wind turbine systems, considers factors such as speed of wind, size of turbine, and energy output. Numerical simulation and measurements are conducted to determine the optimal design and placement of wind turbines in stadiums and gymnasiums. The results demonstrate the potential of wind energy to supplement traditional power sources in sports facilities, and provide sustainable energy solutions while boosting fitness and environmental awareness. The study reveals that with an average speed of 8 m/s, a properly integrated wind turbine system in a stadium or gymnasium can generate approximately 11-23% of the facility's electricity demand. This translates to an annual energy production of 510-1200 kWh per turbine, depending on the specific location and design considerations. The aerodynamic efficacy of the integrated wind turbine system is estimated to be around 40-50%, indicating a significant potential for energy savings and environmental impact reduction.

Applied Machine Learning to Study the Movement of Air Masses in the Wind Farm Area

Modeling the atmospheric boundary layer (ABL) in the area of a wind farm using computational fluid dynamics (CFD) methods allows us to study the characteristics of air movement, the shading effect, the influence of relief, etc., and can be actively used in studies of local territories where powerful wind farms are planned to be located. The operating modes of a wind farm largely depend on meteorological phenomena, the intensity and duration of which cause suboptimal operating modes of wind farms, which require the use of modern tools for forecasting and classifying precipitation. The methods and approaches used to predict meteorological phenomena are well known. However, for designed and operated wind farms, the influence of meteorological phenomena on the operating modes, such as freezing rain and hail, remains an urgent problem. This study presents a multi-layered neural network for the classification of precipitation zones, designed to identify adverse meteorological phenomena for wind farms according to weather stations. The neural network receives ten inputs and has direct signal propagation between six hidden layers. During the training of the neural network, an overall accuracy of 81.78%, macro-average memorization of 81.07%, and macro-average memorization of 75.05% were achieved. The neural network is part of an analytical module for making decisions on the application of control actions (control of the boundary layer of the atmosphere by injection of silver iodide, ionization, etc.) and the formation of the initial conditions for CFD modeling. Using the example of the Ulyanovsk wind farm, a study on the movement of air masses in the area of the wind farm was conducted using the initial conditions of the neural network. Digital models of wind turbines and terrain were created in the Simcenter STAR-CCM+ software package, version 2022.1; an approach based on a LES model using an actuating drive disk model (ADM) was implemented for modeling, allowing calculation with an error not exceeding 5%. According to the results of the modeling of the current layout of the wind turbines of the Ulyanovsk wind farm, a significant overlap of the turbulent wake of the wind turbines and an increase in the speed deficit in the area of the wind farm were noted, which significantly reduced its efficiency. A shortage of speed in the near and far tracks was determined for special cases of group placement of wind turbines.

Optimal placement of wind turbine in distribution grid to minimize energy loss considering power generation probability

This research proposes an algorithm to determine the optimal position of wind turbines in a distribution grid for minimizing its annual energy loss. In this paper, the probability distribution of power generation at each wind turbine node is considered and the nonsimultaneous occurrence of the power generation at wind turbine nodes is also interested. Moreover, we also consider the wind energy exploitability at each node in the grid. This algorithm is coded in MATLAB environment and it is verified via a sample IEEE 33 bus distribution grid with a sample data of power generation probability. The verifying results indicated that the optimal number of wind turbines at each node to obtain a minimal annual energy loss. Results also indicated that the node voltage is varied because of the change of power generation; however, the voltage at all nodes is in normal operation range and its median value is between about 1.01 pu to 1.05 pu. The power factor of wind turbines has an impact on the optimal number of wind turbines at nodes and the efficiency of wind turbine installation.

Intelligent optimal sitting and sizing of distributed resources in presence of renewable energy and fuel cells based on reliability and emission factors

As the integration of renewable energy sources—such as wind, solar, and fuel cells—into power systems increases, challenges related to system reliability and cost efficiency become paramount. This paper examines the reliability of a standard power network composed of diverse energy sources including wind turbines, solar panels, fuel cells, batteries, and diesel generators. This paper proposes a novel hybrid optimization approach utilizing a Grey Wolf Optimizer combined with another advanced algorithm to minimize the total cost of energy production, inclusive of emission penalties for CO2, NO2, and SO2. The proposed approach is tested on IEEE 57-bus and IEEE 118-bus systems, demonstrating significant improvements over existing algorithms. Quantitative results show that our method reduces the total cost by up to 18 % and enhances system reliability by reducing voltage deviations in various scenarios by 12 %. The paper also provides insights into the optimal sizing and placement of wind turbines, photovoltaics, diesel generators, and fuel cells under different emission constraints (15000, 25000, and 45000 kg), further emphasizing the flexibility and effectiveness of our method in addressing environmental and economic challenges in modern power systems.

Optimization of the Offshore Wind Turbines Layout Using Cuckoo Search Algorithm

Wind turbines have gained popularity as one of the efficient micro grid energy generation sources over the years. However, wind energy yield has been greatly impacted by the wind farm wake effect, especially when the size of the wind farm becomes very large. One way to address this challenge is through wind turbine arrangements and their scalability. Developing effective means of optimizing wind farm configurations is a major concern for energy communities. This has continuously led to increased power generation and a corresponding cost reduction. As such, this research article developed an optimal large-scale offshore wind turbine placement based on wind farm layout design. The system developed focuses on wind turbine placement in wind farm layouts that have a negative influence on the capital investment due to the increasing wake effect thereby reducing energy production. A multi-objective function consisting of wake effect and component costs within the wind farm is formulated. After-which a cuckoo search algorithm technique is employed in the wind farm model to optimize the optimization problem (minimizing the wake effect while improving power output and cost). Four test case scenarios were considered when implementing the wind model. The results obtained from the developed scheme were compared with those obtained when other optimization techniques were used, using power output and cost as performance metrics. The obtained power output and cost for the test case scenario in the ideal wind turbine position on the wind farm are 18288.3KW, 19680.1KW, 18879.9KW, 21105.8KW and 26.9, 28.7, 26.9, and 29.8KW, respectively. This shows that the result obtained from the developed scheme outperformed that obtained from PSO and that of WOA.

Boosting prairie dog optimizer for optimal planning of multiple wind turbine and photovoltaic distributed generators in distribution networks considering different dynamic load models

Deploying distributed generators (DGs) supplied by renewable energy resources poses a significant challenge for efficient power grid operation. The proper sizing and placement of DGs, specifically photovoltaics (PVs) and wind turbines (WTs), remain crucial due to the uncertain characteristics of renewable energy. To overcome these challenges, this study explores an enhanced version of a meta-heuristic technique called the prairie dog optimizer (PDO). The modified prairie dogs optimizer (mPDO) incorporates a novel exploration phase inspired by the slime mold algorithm (SMA) food approach. The mPDO algorithm is proposed to analyze the substantial effects of different dynamic load characteristics on the performance of the distribution networks and the designing of the PV-based and WT-based DGs. The optimization problem incorporates various operational constraints to mitigate energy loss in the distribution networks. Further, the study addresses uncertainties related to the random characteristics of PV and WT power outputs by employing appropriate probability distributions. The mPDO algorithm is evaluated using cec2020 benchmark suit test functions and rigorous statistical analysis to mathematically measure its success rate and efficacy while considering different type of optimization problems. The developed mPDO algorithm is applied to incorporate both PV and WT units, individually and simultaneously, into the IEEE 69-bus distribution network. This is achieved considering residential, commercial, industrial, and mixed time-varying voltage-dependent load demands. The efficacy of the modified algorithm is demonstrated using the standard benchmark functions, and a comparative analysis is conducted with the original PDO and other well-known algorithms, utilizing various statistical metrics. The numerical findings emphasize the significant influence of load type and time-varying generation in DG planning. Moreover, the mPDO algorithm beats the alternatives and improves distributed generators' technical advantages across all examined scenarios.

Impact of rotational direction on wake replenishment mechanisms of counter-rotating paired vertical-axis wind turbines

Recent studies have shown that the placement of paired vertical-axis wind turbines (VAWTs) in close proximity is a promising approach to design efficient VAWT farm layouts, mainly due to the increased power output. This study aims to experimentally investigate the impact of the rotational direction of paired counter-rotating VAWTs on their wake characteristics and replenishment mechanisms through a quantitative analysis using the momentum balance equation. The results of this study enhance our understanding of the effect of rotational direction on wake dynamics of counter-rotating paired VAWTs and offer valuable insights for optimising the design of VAWT farm configurations.

A two-step topology and layout wind farm optimization approach

A novel two-step approach is presented to optimize the placement of wind turbines within a wind farm. The goal is to maximize the annual energy production, while the topology and layout of the wind turbines are optimized in sequence with a two-step procedure using gradient-based algorithms. In particular, in the first step the topology of the wind farm is optimized. A grid of potential wind turbine locations is defined, and continuous density variables ranging from zero to one are assigned to each location. The variables indicate the presence or absence of a wind turbine. Throughout the topology optimization process, we penalize the intermediate values of these variables, implicitly pushing the algorithm towards crisp 0-1 final layouts. Constraints are imposed on the minimum and maximum number of wind turbines and the spacing between them. Subsequently, in the second step, we refine the wind farm layout by optimizing the coordinates (x, y) of the wind turbines, which are initialized based on the optimal topology obtained in the first step. Numerical findings demonstrate the capability of the proposed approach to identify non-intuitive optimized wind farm layouts, with reasonable computational resources and time.

Nature-Inspired Wind Farm Layout Optimization: Harnessing Smart Patterns for Sustainable Energy

This research investigates the transformative realm of wind farm layout optimization, with a specific focus on harnessing the efficiency of bio-inspired patterns. The positioning of wind turbine is play a vital role in the maximizing the energy output of a wind farm. If a wind turbine is placed in the wake region of the upstream turbine, the energy produced by the downstream turbine is reduced. Hence, it is imperative to place turbines in such a way that effect of the wake is minimum on a performance of turbines. The conventional grid-based approaches, commonly employed in wind farm layouts, face limitations in capturing the inherent complexity of wind flow dynamics, especially in varied terrains. In contrast, bio-inspired layouts, inspired by patterns observed in natural ecosystem, offer the promising results over the conventional Grid based approach. Our investigation involves the development and implementation of a novel bio-inspired wind farm layout positioning pattern. In the proposed approach, various nature inspired pattern like honeycomb and sunflower seeds pattern is explored for the turbine positioning. Further, the modeling of wind behavior includes both uniform wind speeds and variable wind speeds originating from all directions. The modified passing vehicle search (mPVS) optimization algorithm is used for optimizing the wind turbine placement. The results are obtained for the different wind scenario and compare it with the available results in the literature. The anticipated outcomes of this research include a deeper understanding of the potential benefits and challenges associated with bio-inspired wind farm layouts. The findings aim to contribute valuable insights into optimizing wind turbine placements, maximizing energy capture, and fostering sustainable practices in the wind energy sector. Results shows that the turbine positioning in the proposed bio-inspired pattern produce the higher power output (6%) compared to the conventional grid based approach. Hence, it can be concluded that the approach present in this study can assist wind farm designers and developers in optimally placing turbines for better performance.

A GIS-based multi-criteria decision-making approach (GIS-MCDM) for determination of the most appropriate site selection of onshore wind farm in Adana, Turkey

AbstractEnergy stands as an indispensable global need, yet the finite nature of rapidly depleting fossil fuel reserves poses environmental challenges. To address this, numerous nations are shifting toward sustainable energy sources to foster environmental well-being while satisfying their energy requirements. Among these alternatives, wind energy emerges as a particularly efficient option. This study focuses on identifying optimal sites for installing wind power plants in Adana province through the integration of the analytic hierarchy process (AHP) and geographic information system (GIS). Within this framework, a comprehensive set of 15 criteria was delineated along with their respective sub-criteria. It is thought that the criteria used in the study will be useful not only for Adana province but also for other provinces that are suitable for wind turbine placement and planned to be built. The outcome of this investigation delineates potential areas in Adana province deemed suitable for establishing wind power plants. As a result, analysis reveals that 9.94% of the study area is conducive to establishing a wind farm (WF), while 51.66% is deemed moderately suitable. Notably, the districts of Feke, Tufanbeyli, Saimbeyli, and Pozantı emerge as particularly well-suited for this purpose. This study aims to contribute to the existing literature by identifying precise and suitable areas by combining GIS and AHP in the WF site selection process. In the study, a new research perspective is presented by taking into account the uncertainty in the site selection process and the concept of sustainability in three different dimensions: technical, economic, and environmental, thus aiming to guide decision-makers for future WF projects. In addition, it is thought that the methods and criteria used in the study will also be guiding for future WF site selection studies. Graphical abstract

Wave-phase dependence of Reynolds shear stress in the wake of fixed-bottom offshore wind turbine via quadrant analysis

There has been an increase in recognition of the important role that the boundary layer turbulent flow structure has on wake recovery and concomitant wind farm efficiency. Most research thus far has focused on onshore wind farms, in which the ground surface is static. With the expected growth of offshore wind farms, there is increased interest in turbulent flow structures above wavy, moving surfaces and their effects on offshore wind farms. In this study, experiments are performed to analyze the turbulent structure above the waves in the wake of a fixed-bottom model wind farm, with special emphasis on the conditional averaged Reynolds stresses, using a quadrant analysis. Phase-averaged profiles show a correlation between the Reynolds shear stresses and the curvature of the waves. Using a quadrant analysis, Reynolds stress dependence on the wave phase is observed in the phase-dependent vertical position of the turbulence events. This trend is primarily seen in quadrants 1 and 3 (correlated outward and inward interactions). Quantification of the correlation between the Reynolds shear stress events and the surface waves provides insight into the turbulent flow mechanisms that influence wake recovery throughout the wake region and should be taken into consideration in wind turbine operation and placement.

Wind farm site selection using GIS-based mathematical modeling and fuzzy logic tools: a case study of Burundi

Introduction: The electricity generated from nuclear plants and petroleum-based products has a negative influence on the environment as a whole. It has shown the utility to search out and promote the utilization of renewable, environmentally friendly, and sustainable energy sources such as solar, wind, and geothermal. Nowadays, Wind energy resource has quickly emerged as the world’s fastest-growing energy source.Methods: However, the selection of the most suitable places for developing a wind farm is a crucial challenge that can be seen as a problem of site selection, which involves numerous conflicting variables. Therefore, it is classified as an MCDM (multi-criteria decision-making) problem. The main objective of this research is to determine the best locations in Burundi for the installation of wind farms. The Fuzzy Analytic Hierarchy Process (FAHP) was used to weigh the criteria considering their relative importance. This study considers several key factors when determining the optimal location for a wind farm. These factors include wind speed, slope, proximity to the grid network, distance to roads, and land use/land cover (LULC). Furthermore, a geographic information system (GIS) is utilized to generate the final suitability wind farm locations map.Results and Discussion: The obtained results indicate that 20.91% of the whole study area is suitable nevertheless, only 1.96% is tremendously suitable for wind turbine placement. The western part of Burundi is the optimal area for constructing a wind farm, and the most is in Lake Tanganyika.

Reconfiguration of distribution network-based wind energy resource allocation considering time-varying load using hybrid optimization method

This study proposed a method for optimizing a radial distribution network by integrating wind turbine allocation, considering fluctuating load demands, through the use of a hybrid Grey Wolf Optimizer-Genetic Algorithm (HGWOGA). This approach aims to decrease the network’s energy loss costs. By incorporating genetic algorithm techniques, the method enhances the Grey Wolf Optimizer’s efficiency, speeding up convergence and avoiding local optima. The strategy determines the network’s open lines and the placement and capacity of wind turbines, adhering to radiality and operational constraints. It categorizes load levels into residential, commercial, and industrial, providing a comprehensive analysis of energy losses and their cost implications under various scenarios, including constant and dynamic loads. The study suggests that managing time-varying demand offers a more accurate depiction of network challenges, enabling effective reconfiguration throughout different demand phases. Moreover, HGWOGA demonstrates its ability to find the global optimum efficiently, even with reduced population sizes—a feat not achievable with the Grey Wolf Optimizer alone. Comparative analyses reveal HGWOGA’s effectiveness in curbing network energy loss costs better than previous methodologies. By simultaneously applying network reconfiguration and wind turbine allocation, as opposed to merely reconfiguring the network, this approach notably reduces power loss, diminishes the cost of losses, and enhances the voltage profile. This synergistic strategy leverages the dynamic allocation of wind turbines within the network, optimizing energy flow and distribution efficiency, thereby offering a substantial improvement over conventional network reconfiguration methods.

Physics-inspired and data-driven two-stage deep learning approach for wind field reconstruction with experimental validation

Accurate and reliable wind forecasts for urban blocks play a pivotal role in the construction of zero-energy communities by guiding the selection and placement of wind turbines and the aerodynamic design optimization of ducted openings. While relatively accurate wind fields are available based on numerical methods, their heavy computational cost and discontinuity make it necessary to explore an interactive and end-to-end method. In this study, we develop a physics-inspired and data-driven two-stage deep learning approach that can reconstruct complex wind fields precisely. The proposed method integrates a physical feature extraction model of the flow field with a sparse measurement data-driven error correction approach. In particular, a well-designed and well-trained flow field feature extraction model (original model) can preserve salient features of CFD modelling, while data-driven error correction techniques may harvest the uncertainty features and fill the remaining gaps between the original model predictions and the measured data. The proposed method is verified by a measured dataset from a community in Beijing. Experimental validation illustrates that the proposed algorithm successfully accomplishes wind field reconstruction in complex terrains using sparse datasets. We show that the proposed two-stage strategy exhibits significantly improved prediction results over the purely original method, with an average accuracy improvement of 47.17% and a maximum accuracy improvement of 72.59%. Overall, the proposed method delivers the potential in accurate wind field construction and urban wind energy forecasting.

Experimental Study of Wake Evolution under Vertical Staggered Arrangement of Wind Turbines of Different Sizes

During the expansion of a wind farm, the strategic placement of wind turbines can significantly improve wind energy utilization. This study investigates the evolution of wake turbulence in a wind farm after introducing smaller wind turbines within the gaps between larger ones, focusing on aspects such as wind speed, turbulence intensity, and turbulence integral length scale. The flow field conditions are described using parameters like turbulence critical length and power spectral density, as determined through wind tunnel experiments. In these experiments, a single large wind turbine model and nine smaller wind turbine models were used to create a small wind farm unit, and pressure distribution behind the wind turbines was measured under various operating conditions. The results indicate that downstream wind speed deficits intensify as the number of small wind turbines in operation increases. The impact of these smaller turbines varies with height, with a relatively minor effect on the upper blade tip and increasingly adverse effects as you move from the upper blade tip to the lower blade tip. Through an analysis of power spectral density, the contribution of vortex motion to wake turbulence kinetic energy is further quantified. In the far wake region, the number of small wind turbines has a relatively small impact on wind speed fluctuations.

Optimal Design and Operation of Wind Turbines in Radial Distribution Power Grids for Power Loss Minimization

This research proposes a strategy to minimize the active power loss in the standard IEEE 85-node radial distribution power grid by optimizing the placement of wind turbines in the grid. The osprey optimization algorithm (OOA) and walrus optimization algorithm (WOA) are implemented to solve the problem. The two algorithms are validated in three study cases of placing two wind turbines (WTs) in the system for power loss reduction. Mainly, in Case 1, WTs can only produce active power, while in Case 2 and Case 3, WTs can supply both active and reactive power to the grid with different ranges of power factors. In Case 4, the best-applied methods between the two are reapplied to reach the minimum value of the total energy loss within one year. Notably, this case focuses on minimizing the total power loss for each hour in a day under load demand variations and dynamic power supply from WTs. On top of that, this case uses two different sets of actual wind power data acquired from the Global Wind Atlas for the two positions inherited from the previous case. Moreover, the utilization of wind power is also evaluated in the two scenarios: (1) wind power from WTs is fully used for all values of load demand, (2) and wind power from WTs is optimized for each load demand value. The results in the first three cases indicate that the WOA achieves better minimum, mean, and maximum power losses for the two cases than the OOA over fifty trial runs. Moreover, the WOA obtains an excellent loss reduction compared to the Base case without WTs. The loss of the base system is 224.3 kW, but that of Case 1, Case 2, and Case 3 is 115.6, 30.6 kW, and 0.097 kW. The placement of wind turbines in Case 1, Case 2, and Case 3 reached a loss reduction of 48.5%, 84.3%, and 99.96% compared to the Base case. The optimal placement of WTs in the selected distribution power grid has shown huge advantages in reducing active power loss, especially in Case 3. For the last study case, the energy loss in a year is calculated by WSO after reaching hourly power loss, the energy loss in a month, and the season. The results in this case also indicate that the optimization of wind power, as mentioned in Scenario 2, results in a better total energy loss value in a year than in Scenario 1. The total energy loss in Scenario 2 is reduced by approximately 95.98% compared to Scenario 1. So, WOA is an effective algorithm for optimizing the placement and determining the power output of wind turbines in distribution power grids to minimize the total energy loss in years.

Conducting a Geographical Information System-Based Multi-Criteria Analysis to Assess the Potential and Location for Offshore Wind Farms in Poland

Offshore wind energy is becoming an increasingly important element in the decarbonisation of energy systems. This study aims to estimate the technical potential for offshore wind energy in the Polish exclusive economic zone (EZZ) of the Baltic Sea. Such estimates are necessary to plan the expansion of energy infrastructure. This paper proposes a multi-criteria analysis for the estimation of offshore wind potential and site selection using QGIS software (QGIS Desktop 3.28.6). The criteria include wind velocity, water depth, distance from nature conservation areas, distance from submarine cables and gas pipelines, distance from shipping routes, distance from fishing areas, distance from shipwrecks, and distance from the coastline. The best sites are identified through the Analytic Hierarchy Process (AHP). The results show that the total suitable marine area of 16,218.67 square kilometres can be divided into three parts, in which the highly suitable area for offshore wind farms accounts for 17.55%, the moderately suitable area accounts for 48.56%, and the marginally suitable area accounts for 10.26%. Two different wind turbine placement configurations are being considered, in which wind turbines with a nominal capacity of 15 MW are laid out: 2.5 km and 2 km apart from each other. The corresponding overall electrical capacities only in highly suitable areas equal ca. 9 GW and 15 GW, respectively. If this area is extended to also include the moderately suitable parts, these values increase to ca. 31 GW and 50 GW. The results indicate that the technical potential of offshore wind in the Polish EEZ is significant and should be taken into account when designing the future electricity generation mix.

A novel binary genetic differential evolution optimization algorithm for wind layout problems

<abstract><p>This paper addresses the increasingly critical issue of environmental optimization in the context of rapid economic development, with a focus on wind farm layout optimization. As the demand for sustainable resource management, climate change mitigation, and biodiversity conservation rises, so does the complexity of managing environmental impacts and promoting sustainable practices. Wind farm layout optimization, a vital subset of environmental optimization, involves the strategic placement of wind turbines to maximize energy production and minimize environmental impacts. Traditional methods, such as heuristic approaches, gradient-based optimization, and rule-based strategies, have been employed to tackle these challenges. However, they often face limitations in exploring the solution space efficiently and avoiding local optima. To advance the field, this study introduces LSHADE-SPAGA, a novel algorithm that combines a binary genetic operator with the LSHADE differential evolution algorithm, effectively balancing global exploration and local exploitation capabilities. This hybrid approach is designed to navigate the complexities of wind farm layout optimization, considering factors like wind patterns, terrain, and land use constraints. Extensive testing, including 156 instances across different wind scenarios and layout constraints, demonstrates LSHADE-SPAGA's superiority over seven state-of-the-art algorithms in both the ability of jumping out of the local optima and solution quality.</p></abstract>