Piezoelectric Pressure Sensor Research Articles

Fabrication of Flexible Wearable Mechanosensors Utilizing Piezoelectric Hydrogels Mechanically Enhanced by Dipole-Dipole Interactions.

Conductive hydrogels have been increasingly employed to construct wearable mechanosensors due to their excellent mechanical flexibility close to that of soft tissues. In this work, piezoelectric hydrogels are prepared through free radical copolymerization of acrylamide (AM) and acrylonitrile (AN) and further utilized in assembling flexible wearable mechanosensors. Introduction of the polyacrylonitrile (PAN) component in the copolymers endows the hydrogels with excellent piezoelectric properties. Meanwhile, significant enhancement of mechanical properties has been accessed by forming dipole-dipole interactions, which results in a tensile strength of 0.51 MPa. Flexible wearable mechanosensors are fabricated by utilizing piezoelectric hydrogels as key signal converting materials. Self-powered piezoelectric pressure sensors are assembled with a sensitivity (S) of 0.2 V kPa-1. Additionally, resistive strain sensors (gauge factor (GF): 0.84, strain range: 0-250%) and capacitive pressure sensors (S: 0.23 kPa-1, pressure range: 0-8 kPa) are fabricated by utilizing such hydrogels. These flexible wearable mechanosensors can monitor diverse body movements such as joint bending, walking, running, and stair climbing. This work is anticipated to offer promising soft materials for efficient mechanical-to-electrical signal conversion and provides new insights into the development of various wearable mechanosensors.

Nonlinear Analysis of Electric Potential in a Piezoelectric Thin Plate as Pressure Sensor

Piezoelectric materials are widely applied in electronic components due to their ability to couple electric and mechanical fields. For the piezoelectric thin plate as a pressure sensor, we extend the modified first-order piezoelectric plate theory to explore the nonlinear solution of electric potential and discuss the relevant regulation mechanisms. Based on the piezoelectric effect, the electric potential generated by deformation is not linear with thickness. A quadratic function of electric potential across thickness is introduced. However, the electric potential on upper and lower electrodes is an unknown constant, which can be determined by the nonlinear complementary equation based on the Gauss theorem. It is shown that the nonlinear results of electric potential are consistent with outcomes by the three-dimensional finite element method. Furthermore, relevant regulation mechanisms are discussed on electric potential, including supported conditions, plate thickness, and load area. In addition, the influence of load locations on the electric potential response is analyzed. It is expected that these findings will be instructive to the structural design of piezoelectric pressure sensors.

Effect of Nanostructure Morphology and Concentration on the Piezoelectric Performance of Flexible Pressure Sensor based on PVDFTrFE/ Nano-ZnO Composite Thin Film

Background: The development of high-performance piezoelectric pressure sensors with outstanding sensitivity, good linearity, flexibility, durability, and biocompatibility is of great significance for smart robotics, human healthcare devices, smart sensors, and electronic skin. Thus, considerable progress has been achieved in enhancing the piezoelectric property of PVDF-TrFEbased composite pressure sensors by adding various ZnO nanostructures in PVDF-TrFE polymer acting as a nucleating agent and dielectric material. Aims: In this work, flexible pressure sensors with a sandwich structure based on PVDFTrFE/ nano-ZnO composite sensing film were fabricated using a simple spin-coating method and post-annealing process, while electrospinning and high-voltage polarization processes were not adopted. Methods: Poly (vinylidene fluoride-trifluoroethylene) (PVDF-TrFE)/nano-ZnO composite films were prepared via spin coating to fabricate flexible piezoelectric pressure sensors. ZnO nanoparticles (ZnO NPs), tetrapod ZnO (T-ZnO) and ZnO nanorods (ZnO NRs) were used as nano-fillers for piezoelectric PVDF-TrFE, to enhance the beta-crystal ratio as well as the crystallinity of PVDF-TrFE. The structural and surface morphologies of the composite films were investigated using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results: Among three different types of ZnO nanostructures with a concentration range (0-7.5 wt%), the sensor with 0.75 wt% ZnO NRs nanofiller exhibits a maximum output voltage of 1.73 V under an external pressure of 3 N and a maximum sensitivity of 586.3 mV/N at the range of 0-3 N. Further, the sensor can generate a clear piezoelectric voltage under bending and twisting deformation as well as compression and tensile deformation. Conclusion: To summarize, the addition of different concentrations of nano-ZnO can remarkably improve the piezoelectric performance of the composite sensor, and ZnO NRs can achieve better piezoelectric properties of the sensor as compared to ZnO NPs and T-ZnO. In addition, the sensor with 0.75 wt% ZnO NRs as nanofiller has the highest piezoelectric response, which is about 2.4 times that of the pure PVDF-TrFE sensor. It is demonstrated that the sensor has great potential applications in wearable health monitoring systems and mechanical stress measurement electronics.

Development of Highly Flexible Piezoelectric PVDF-TRFE/Reduced Graphene Oxide Doped Electrospun Nano-Fibers for Self-Powered Pressure Sensor.

The demand for self-powered, flexible, and wearable electronic devices has been increasing in recent years for physiological and biomedical applications in real-time detection due to their higher flexibility and stretchability. This work fabricated a highly sensitive, self-powered wearable microdevice with Poly-Vinylidene Fluoride-Tetra Fluoroethylene (PVDF-TrFE) nano-fibers using an electrospinning technique. The dielectric response of the polymer was improved by incorporating the reduced-graphene-oxide (rGO) multi-walled carbon nano-tubes (MWCNTs) through doping. The dielectric behavior and piezoelectric effect were improved through the stretching and orientation of polymeric chains. The outermost layer was attained by chemical vapor deposition (CVD) of conductive polymer poly (3,4-ethylenedioxythiophene) to enhance the electrical conductivity and sensitivity. The hetero-structured nano-composite comprises PVDF-TrFE doped with rGO-MWCNTs over poly (3,4-ethylenedioxythiophene) (PEDOT), forming continuous self-assembly. The piezoelectric pressure sensor is capable of detecting human physiological vital signs. The pressure sensor exhibits a high-pressure sensitivity of 19.09 kPa-1, over a sensing range of 1.0 Pa to 25 kPa, and excellent cycling stability of 10,000 cycles. The study reveals that the piezoelectric pressure sensor has superior sensing performance and is capable of monitoring human vital signs, including heartbeat and wrist pulse, masticatory movement, voice recognition, and eye blinking signals. The research work demonstrates that the device could potentially eliminate metallic sensors and be used for early disease diagnosis in biomedical and personal healthcare applications.

Nanofillers embedded flexible piezoelectric polymer sensor pad for robotic and human finger tap analysis

Flexible pressure sensors are receiving a lot of attention due to their use in wearable electronic devices, human-machine interactive systems, and physiological signal monitoring. In this paper, we present a novel nanofiller embedded thin film based piezoelectric pressure sensor for finger tapping analysis. The active material is fabricated using poly (vinylidene fluoride) (PVDF) having zirconium oxide (ZrO2) nanofillers. It is observed that the incorporation of ZrO2 nanofillers has a substantial impact on the structural characteristics of PVDF polymer, leading to enhancements in its piezoelectric properties. Moreover, the PVDF/2 wt% ZrO2 composite film sensor showed a notable maximum piezoelectric output voltage of ∼210 millivolts at a load of 20 g (0.88 kPa applied pressure). A four-fold enhancement in response is observed in case of PVDF/2 wt% ZrO2 composite in comparison to pristine PVDF sensor. Further, a sensitivity of 0.255 ± 0.083 kPa−1 has been recorded for the composite based sensor. Additionally, maximum of 115 mV is obtained when the composite sensor is tapped manually. The recorded maximum values for impulsive pressure (38 g), high pressure (108 g), and low pressure (45 g) are 76 mV, 150 mV, and 90 mV, respectively. The sensor is efficiently able to detect robotic tapping and stress on the human fingers. An efficiency of around 90% was achieved in PVDF/ 2 wt% ZrO2 at 5 kV/cm using PE hysteresis loop data. The findings indicate that PVDF/ZrO2 composite based piezoelectric pressure sensor has promising capabilities for applications in wearable electronic devices and medical diagnostics.

Enhanced self-polarization effect by tuning interfacial binding energy for self-powered flexible piezoelectric pressure sensors

Flexible pressure sensors based on PVDF and its copolymers have been extensively investigated due to their unique self-powered characteristics and high sensitivity. Herein, a new strategy of manipulation the interfacial binding energy between the organic and inorganic groups has been utilized to enhance the performance of the flexible piezoelectric pressure sensors. Four types of interfacial interactions of different binding energy have been designed in the polydopamine (PDA) decorated lead zirconate titanate (PZT) and P(VDF-TrFE) composites. The results based on first-principles calculations reveal that PDA acts as a binder between PZT and P(VDF-TrFE) due to the strong interaction between -NH2 and -CF2- dipoles. The strong interaction results in enhanced self-polarization effect and enhanced piezoelectric effect, and the improved sensitivity of the pressure sensors. The β-phase content of P(VDF-TrFE) increases from 17% to 87% when the content of PZT@PDA nanoparticles reaches 15 wt%. PZT@PDA/P(VDF-TrFE) self-powered pressure sensor (SPPS) exhibits an output voltage of 44 V and a high sensitivity of 1.38 V/kPa with no significant performance degradation during 10,000 cycles of pressure application. Moreover, the SPPS shows an excellent self-powered ability with the highest short-circuit current of 8.6 μA and the peak power density of 15 μW/cm2. The SPPS demonstrates the extraordinary sensing performance in body motion sensing and hand gesture recognition.

Design and Optimization of Piezoelectric Pressure Sensor with AlN as piezo electric material for High-Temperature Application using COMSOL 5.3

Dynamic pressure sensors in contrast to static pressure sensors measure pressure changes in liquids or gases generated due to a blast, a propulsion or an explosion, where the temperature is normally high which is above 700°C[1]. Piezoelectric pressure sensors with their inherent advantage of direct transduction capability are drawing attention for high-temperature applications. Lead Zirconate Titanate (PZT) and Zinc Oxide (ZnO) are popular ferroelectric materials for Piezoelectric sensor applications. Aluminum Nitride (AlN) is a suitable candidate for high-temperature applications with its high melting point of 2673 K, the piezoelectric property remaining stable even up to 1423K, the energy band gap of 6.2eV, piezoelectric coefficient d33 of 7pC/N and pressure handling capacity up to 10 MPa. In this study, COMSOL Multiphysics 5.3 was used to analyse the pressure sensing capability of AlN film by optimizing the crystal orientation and the dimension of AlN in addition to studying suitability of using at high temperature. Also a comparison is done on the high temperature performance of pressure sensor using Silicon and Silicon Carbide as diaphragm.

Flexible piezoelectric pressure sensor based on BaTiO3-CNT/RTV composite film with filter paper microstructures for monitoring hand motions

Flexible piezoelectric sensors are widely used in various applications such as physiological signal monitoring and human-computer interaction. The present study introduces a BaTiO3-CNT/RTV piezoelectric sensor fabricated using a filter paper template. It incorporates micro-scale fiber stacking and a 1% CNT doping in the microstructure, resulting in a notable enhancement of sensor sensitivity, increasing it from 0.07 V N−1 to 0.69 V N−1, representing an almost tenfold improvement. Furthermore, the study investigates the influence of affecting factors like the flexible substrate of the sensing film, thickness, and mass fractions of various materials on the output voltage. The sensor exhibits superior characteristics such as good repeatability under 5000 cyclic loads, high elongation at break, fast response (80 ms) and recovery times (90 ms), and good linearity. It also demonstrates outstanding sensitivity (12 mV/10°) when monitoring different finger bending states, enabling real-time, sensitive, and reliable hand motion tracking. This sensor holds promising prospects for future developments in the fields of intelligent grasping and sign language translation.

Monolithic three-dimensional hafnia-based artificial nerve system

Artificial nerve systems that mimic the tactile perception ability of human skin could be adopted in the realization of devices for a hyperconnected society, including prosthetic devices, interfaces for virtual reality, and smart sensors. The system consists of a pressure sensor, memory, and signal processing circuit, which possess the capability of generating sensory neuron-like signals. Although technological advances have been made in semiconductor-based memory and transistors over the decades, sensor technology is still relying on micro-electromechanical systems, which are hard to realize miniaturization/high-density and high-performance technology. Here, we demonstrate a monolithic three-dimensional integrated artificial nerve on the basis of ferroelectric HfxZr1-xO2 for use in the core element of neuromorphic memory and a self-powered piezoelectric pressure sensor. The morphotropic phase boundary (MPB) state of hafnia film was formed between orthorhombic and tetragonal phases for high piezoelectric performance. The MPB-based sensor was integrated with self-rectifying ferroelectric tunnel junction memory and silicon-based ring oscillator. We realized a frequency-modulated pulse-like synaptic signal with pressure detection ability over a wide range of 1–50 kPa and a good sensitivity of 0.35 mV/kPa. Also, we demonstrate the real-time frequency-modulated operation of the artificial nerve system by adjusting the functional properties of the hafnia films.

Kirigami-inspired, three-dimensional piezoelectric pressure sensors assembled by compressive buckling

Piezoelectric sensors whose sensing performances can be flexibly regulated hold significant promise for efficient signal-acquisition applications in the healthcare field. The existing methods for regulating the properties of polyvinylidene fluoride (PVDF) films mainly include material modification and structural design. Compared to material modification, which has a long test period and an unstable preparation process, structural design is a more efficient method. The irigami structure combined with compressive buckling can endow the flexible film with rich macrostructural features. Here, a method is fabricated to modulate the sensing performance by employing distinct 3D structures and encapsulation materials with varying Young’s moduli. The relationship among the aspect ratio (α), pattern factor (η), elastic modulus of encapsulation materials, and equivalent stiffness is obtained by finite element simulation, which provides theoretical guidance for the design of the 2D precursor and the selection of encapsulation materials. In the demonstration applications, the sensor accurately captures pulse waveforms in multiple parts of the human body and is employed for the pressure monitoring of different parts of the sole under various posture states. This method of structure design is efficient, and the preparation process is convenient, providing a strategy for the performance control of piezoelectric pressure sensors.

High-sensitivity piezoelectric pressure/stress sensors based on LiNbO3 for minuscule pressure/stress detection

Minuscule pressure/stress detection with high sensitivity can recognize and deal with potential hazards timely, which is crucial for guaranteeing the security of human and stability of social functioning. Lithium niobate (LiNbO3) single crystal possessing excellent piezoelectric and ferroelectric properties is suitable for fabricating piezoelectric pressure sensors. Therefore, in this paper, the pressure sensors based on LiNbO3 single crystals with parallel connected structure were researched. Sensors with parallel connected structure can improve the sensitivity from 4.86 V/N of single sheet structure to 8.71 V/N under the stress between 0.01 N and 0.2 N at 30 °C. Both types of the sensors can detect the minuscule stress low to 0.01 N and minuscule pressure generated by balloon pump, blowing largely or slowly. The influence of temperature on sensors was also researched, and the results exhibited that sensors performed well from 30 °C to 60 °C and still sustained high sensitivity of 5.26 V/N of parallel connected structure and 3.71 V/N of single sheet structure at 60 °C. Besides, the response time of sensors to the pressure of balloon pump is 60 ms under different temperature. These excellent properties indicate the great potential applications of fabricated sensors in practical minuscule pressure/stress detection.

Design and fabrication of a novel all-quartz resonant pressure sensor with continuously variable section of DETF

This paper reports a novel piezoelectric quartz crystal pressure sensor with a double-ended tuning fork (DETF) resonator. The key design is the resonator beams with a continuously variable section shape. Different from the traditional DETF with straight beams or the one with variable sections with steps, this design can improve sensitivity effectively. Theoretical analysis indicates that the sensitivity will increase with a decrease in beam width. Resonant pressure sensors with three different DETFs are designed and analyzed by finite element analysis software. Simulation results show that the sensitivity of this design is 162.27 Hz/MPa. This sensor has a typical structure, which includes three parts: the diaphragm, DETF resonator, and back-cavity structure. Quartz MEMS processes have been used in fabrication. The three parts are bonded together by vacuum glass frit sealing process. Test results of this sensor show that the natural frequency is 44.709 kHz with a quality factor of 12 717. The sensitivity is 155.6 Hz/MPa in the pressure range of 0–20 MPa. The results indicate that this novel design has advantages in sensitivity and fabrication processes. It will be a benefit for a high-performance and low-cost pressure measurement.

Blast wave pressure measurement and analysis in air and granular media inside a shock tube using a fiber Bragg grating sensor.

In this work, we have demonstrated the use of a fiber Bragg grating (FBG) sensor to measure the pressure profile of blast waves generated inside a vertical shock tube (VST). An FBG pressure sensor probe has been designed and developed that can be incorporated into the wall of the VST. The VST facility is used to generate blast waves with decay times of the order of a few milliseconds to simulate explosive events. Pressure measurement experiments have been carried out at different incident blast wave peak pressures inside the VST. The FBG pressure sensor measurements are validated against a standard piezoelectric pressure transducer at an acquisition rate of 1MHz. The pressure signals of both sensors are found to match well with similar rise times and decay profiles. The validated FBG pressure sensor is then incorporated into a sand column mounted in the test section of the VST to measure the pressure profile of blast wave-induced stress waves in granular media. The FBG and piezoelectric pressure sensor data are compared using fast Fourier transform analysis and continuous wavelet transform. The feasibility of FBG sensors for blast pressure measurement under harsh conditions imposed inside shock tube environments is established.

Aluminum Nitride Thin Film Piezoelectric Pressure Sensor for Respiratory Rate Detection.

In this study, we propose a low-cost piezoelectric flexible pressure sensor fabricated on Kapton® (Kapton™ Dupont) substrate by using aluminum nitride (AlN) thin film, designed for the monitoring of the respiration rate for a fast detection of respiratory anomalies. The device was characterized in the range of 15-30 breaths per minute (bpm), to simulate moderate difficult breathing, borderline normal breathing, and normal spontaneous breathing. These three breathing typologies were artificially reproduced by setting the expiratory to inspiratory ratios (E:I) at 1:1, 2:1, 3:1. The prototype was able to accurately recognize the breath states with a low response time (~35 ms), excellent linearity (R2 = 0.997) and low hysteresis. The piezoelectric device was also characterized by placing it in an activated carbon filter mask to evaluate the pressure generated by exhaled air through breathing acts. The results indicate suitability also for the monitoring of very weak breath, exhibiting good linearity, accuracy, and reproducibility, in very low breath pressures, ranging from 0.09 to 0.16 kPa. These preliminary results are very promising for the future development of smart wearable devices able to monitor different patients breathing patterns, also related to breathing diseases, providing a suitable real-time diagnosis in a non-invasive and fast way.

Ultrahigh sensitive and rapid-response self-powered flexible pressure sensor based on sandwiched piezoelectric composites

Flexible sensors and actuators are the basis for realizing the Internet of Everything. This study identifies specific interfacial polarization and filler dispersion challenges in flexible sensors. A novel sandwich-structured flexible sensor with polydimethylsiloxane (PDMS)-filled Nb2CTx as the interlayer and poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)]-filled barium titanate (BTO) as the upper and lower layers was designed and fabricated. The thickness of the interlayer was optimized to be 6.2 μm, resulting in an ultrahigh sensitivity of 16.05 V/N and ultrashort response time of 626 μs. The interlayer achieved an oriented arrangement of the dipoles in the upper and lower piezoelectric films through interfacial polarization, enhancing the piezoelectric output and sensitivity. The proposed mechanism was confirmed by the dielectric properties, local piezoelectric response, cross-sectional potential simulation, and interfacial electrical calculations. Additionally, the sensor effectively distinguishes various body movements, facial micro-expressions, and throat vibrations during vocalization, and can be applied to ultrahigh-sensitive self-powered flexible piezoelectric pressure sensors.

Experimental study on the cavitation phenomenon effect on the efficiency of a turbulent premixed flame kerosene/air

In order to characterize the influence of cavitation in a nozzle on a turbulent premixed kerosene/air flame, an experimental study was conducted using a NexGen burner. This study was carried out in two distinct stages. The first stage was devoted to characterizing the necessary conditions for inducing the cavitation phenomenon, using a novel experimental device enabling fluidic study. The second stage enabled the characterization of the influence of cavitation on a flame, building upon the previously obtained results. To this end, three DELAVAN nozzles (2.25; 2.5; 3.0 80 W) were employed. The fluidic characterization stage involved the manufacture of transparent nozzles, facilitating the integration of piezoelectric pressure sensors. The results showed that cavitation has a significant influence on the temperature and density heat flux flame associated to the effect on the flame structure represented by three distinct zones: continuous flame, intermittent flame and plume flame. For the 2.25 80 W nozzle based on the smallest diameter, the risk of cavitation is the highest, and the results showed that for the lowest value of the cavitation number, the continuous flame was no longer visible proving the harmful effects of cavitation on the combustion of a premixed flame from a burner such as the NexGen burner.

Enhancing the electric charge output in LiNbO3-based piezoelectric pressure sensors.

Lithium niobate (LiNbO3) single crystals are a kind of ferroelectric material with a high piezoelectric coefficient and Curie temperature, which is suitable for the preparation of piezoelectric pressure sensors. However, there is little research reporting on the use of LiNbO3 single crystals to prepare piezoelectric pressure sensors. Therefore, in this paper, LiNbO3 was used to prepare piezoelectric pressure sensors to study the feasibility of using LiNbO3 single crystals as a sensitive material for piezoelectric pressure sensors. In addition, chemical mechanical polishing (CMP) technology was used to prepare LiNbO3 crystals with different thicknesses to study the influence of these LiNbO3 crystals on the electric charge output of the sensors. The results showed that the sensitivity of a 300 μm sample (0.218 mV kPa-1) was about 1.23 times that of a 500 μm sample (0.160 mV kPa-1). Low-temperature polymer heterogeneous integration and oxygen plasma activation technologies were used to realize the heterogeneous integration of LiNbO3 and silicon to prepare piezoelectric pressure sensors, which could significantly improve the sensitivity of the sensor by approximately 16.06 times (2.569 mV kPa-1) that of the original sample (0.160 mV kPa-1) due to an appropriate residual stress that did not shatter LiNbO3 or silicon, thus providing a possible method for integrating piezoelectric pressure sensors and integrated circuits.

Nerve GABA neurotransmitter health level detection system

Currently, neurological disorders are the primary global cause of illness and disability. Transcranial ultrasound stimulation in the deep brain has limited spatial resolution. However, ultrasound can enhance energy propagation resolution affected by tissue and bone dispersion. Among the non-invasive imaging methods in this category are biochemical assays that measure GABA levels and the highly expensive Magnetic Resonance Spectroscopy (MRS). Gamma- Aminobutyric Acid (GABA), a major neurotransmitter in the brain, contributes to 40% of inhibitory synapses in adult vertebrates. Biosensors such as piezoelectric sensors and the MPU6050 can accurately determine GABA levels in the nervous system. This system uses a Micro Processing Unit (MPU) and a piezoelectric pressure sensor to detect changes in GABA levels, which are essential for maintaining neurological health and balance. The system provides real-time data on GABA levels, and this high-accuracy information is displayed on an LCD panel.

Research on somatosensory shock wave pressure measurement method based on PVDF film

Piezoelectric pressure sensors and human tissue have different pressure impedance coefficients, which results in a discrepancy when accurately measuring the real somatosensory shock wave pressure (SSWP). The aim of this research is to develop a method that can realistically characterize SSWP measurements. To achieve this, the study uses the finite element method to analyze the response of both human tissue and piezoelectric pressure sensors to the same shock wave load. The numerical simulation results show a significant difference in the pressure response between the two under identical shock wave loads. Based on this, the working mode and equivalent model of Polyvinylidene fluoride (PVDF) film for measuring SSWP are determined. Using the finite element method, the same shock wave pressure load is applied to PVDF films with thicknesses of 20 μm, 50 μm, 100 μm, as well as human tissue. The results reveal a good agreement between the pressure response of the PVDF film and human tissue. As the thickness of the PVDF film decreases, particularly at 20 μm thickness, the accuracy improves. Additionally, a comparative experiment is conducted using a bionic dummy model. The outcomes indicate that PVDF film is more stable than piezoelectric pressure sensors and can accurately characterize the real SSWP, aligning with the numerical simulation results by up to 98.4%.

Boosting Sensing Performance of Flexible Piezoelectric Pressure Sensors by Sb Nanosheets and BaTiO3 Nanoparticles Co‐Doping in P(VDF‐TrFE) Nanofibers Mat

AbstractFlexible piezoelectric pressure sensors (FPPS) received a lot of attention because of their prominent performance in body motion detection and energy recovery. However, it has faced a huge challenge in manufacturing FPPS with high sensitivity, low cost, and high flexibility. Herein, a ternary flexible nanofiber composite with Sb nanosheets and BaTiO3 nanoparticles as the fillers of P(VDF‐TrFE) is prepared by electrospinning. An impressive open‐circuit voltage of 17.1 V and short‐circuit current of 4.4 µA is obtained based on the composite nanofiber mat at a pressure of 128 kPa with 2 Hz frequency. The FPPS not only exhibit a high sensitivity of 96 mV kPa−1 but also an ultrafast response time of 2 ms. Excellent flexibility and reliability are demonstrated by the unchanged open‐circuit voltage after 2400 cycles. The enhanced FPPS performance is owed to the interfacial polarization effect at the inorganic filler‐organic matrix interface, which also enhances the ferroelectric and dielectric properties. The present FPPS is further confirmed to be a real‐time motion monitor and voice recognizer, which can distinguish various actions and sounds according to distinct output voltage signals and is expected to be used in virtual reality devices, robotic electronic skin, haptic simulation, artificial throat, etc.